17/08/2026

Rezultate pentru "cable holder" în Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

280 produse
Resetați toate
Cable clip for adhesive use/with pipe/tube holder, Dmax=12.0mm
Comparare
SAC3-ST-WH 151-00300
Comparare
Adăugați la lista de urmărire
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
White (WH) SAC3-ST-WH 151-00300
Fixing tie with pipe/tube holder, inside serrated, ⌀45.0mm, black, 2000pcs.
Pipe Clip CBTO, twistable 90°.
Comparare
T50ROC15-18CBTO-SD-SET-PA66HS/PA66HIRHS-BK 156-00419
Comparare
Adăugați la lista de urmărire
Pipe Clip CBTO, twistable 90°.
Comparare
Comparare
Adăugați la lista de urmărire
2000 pcs.
Black (BK) T50ROC15-18CBTO-SD-SET-PA66HS/PA66HIRHS-BK 156-00419
Fixing tie with pipe/tube holder, inside serrated, ⌀45.0mm, black, 3000pcs.
Pipe Clip CBTO, twistable 90°.
Comparare
T50ROC19-24.5CBTO-SD-SET-PA66HS/PA66HIRHS-BK 156-00422
Comparare
Adăugați la lista de urmărire
Pipe Clip CBTO, twistable 90°.
Comparare
Comparare
Adăugați la lista de urmărire
3000 pcs.
Black (BK) T50ROC19-24.5CBTO-SD-SET-PA66HS/PA66HIRHS-BK 156-00422
Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀9.0 x 12.0 mm/9.0 x 14.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10 - 14 mm
LOC1014FT9x12 locking clamp.
Comparare
LOC1014FT9x12-PA66HIRHSUV-BK 151-02501
Comparare
Adăugați la lista de urmărire
LOC1014FT9x12 locking clamp.
Comparare
Comparare
Adăugați la lista de urmărire
500 pcs.
Black (BK) LOC1014FT9x12-PA66HIRHSUV-BK 151-02501
Cable clip (LOC20-25FT6.5LG)
Locking tab on this clip is small enough that it will not interfere with any other portion of the wire routing, but is significant enough to allow for manual disengagement if service is needed.
Comparare
LOC20-25FT6.5LG-PA66HIRHSUV-BK 151-01371
Comparare
Adăugați la lista de urmărire
Locking tab on this clip is small enough that it will not interfere with any other portion of the wire routing, but is significant enough to allow for manual disengagement if service is needed.
Comparare
Comparare
Adăugați la lista de urmărire
1000 pcs.
Black (BK) LOC20-25FT6.5LG-PA66HIRHSUV-BK 151-01371
Cable clip for adhesive use/with pipe/tube holder, Dmin=12.70mm, Dmax=19.56mm
The self adhesive mount of Ratchet -P-Clamp series creates an incredible bond with mounting surface.
Comparare
IRCBMB5A-PA66HIRHSUV-BK 156-02723
Comparare
Adăugați la lista de urmărire
The self adhesive mount of Ratchet -P-Clamp series creates an incredible bond with mounting surface.
Comparare
Comparare
Adăugați la lista de urmărire
25
Black (BK) IRCBMB5A-PA66HIRHSUV-BK 156-02723
Cable clip for edge, T=1.0 - 3.0mm, Dmin=6.5mm, Dmax=8.5mm
EdgeClip with Twist Lock.
Comparare
EC1-3TL7OTP-PA66HIRHS-BK 151-02588
Comparare
Adăugați la lista de urmărire
EdgeClip with Twist Lock.
Comparare
Comparare
Adăugați la lista de urmărire
500 pcs.
Black (BK) EC1-3TL7OTP-PA66HIRHS-BK 151-02588
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 250pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Comparare
T50SVCOC18-20A-PA66HS/PA66HIRHS-BK 156-01190
Comparare
Adăugați la lista de urmărire
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Comparare
Comparare
Adăugați la lista de urmărire
250 pcs.
Black (BK) T50SVCOC18-20A-PA66HS/PA66HIRHS-BK 156-01190
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 250pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Comparare
T50SVCOC18-20B-PA66HS/PA66HIRHS-BK 156-01194
Comparare
Adăugați la lista de urmărire
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Comparare
Comparare
Adăugați la lista de urmărire
250 pcs.
Black (BK) T50SVCOC18-20B-PA66HS/PA66HIRHS-BK 156-01194
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 5000pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Comparare
T50SVCOC9-11B-PA66HIRHS/PA66HS-BK 156-01237
Comparare
Adăugați la lista de urmărire
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Comparare
Comparare
Adăugați la lista de urmărire
5000 pcs.
Black (BK) T50SVCOC9-11B-PA66HIRHS/PA66HS-BK 156-01237
Fixing tie with pipe/tube holder, ⌀5.0-9.0mm, black, 1000pcs.
The cable tie bundles wires, cables or tubes, and the C-clip snaps onto the tubular frame rail.
Comparare
T50SMVCLOC5-9-PA66HIRHSUV-BK 156-02384
Comparare
Adăugați la lista de urmărire
The cable tie bundles wires, cables or tubes, and the C-clip snaps onto the tubular frame rail.
Comparare
Comparare
Adăugați la lista de urmărire
1000 pcs.
Black (BK) T50SMVCLOC5-9-PA66HIRHSUV-BK 156-02384
Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Comparare
T50SVCOC9-11A-PA66HIRHS/PA66HS-BK 156-01236
Comparare
Adăugați la lista de urmărire
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Comparare
Comparare
Adăugați la lista de urmărire
500 pcs.
Black (BK) T50SVCOC9-11A-PA66HIRHS/PA66HS-BK 156-01236
Fixing tie with pipe/tube holder, outside serrated, ⌀2.0-35.0mm, black, 500pcs.
Comparare
T50SOSASVCOC9-11B-PA66HIRHS-BK 156-03039
Comparare
Adăugați la lista de urmărire
Comparare
Comparare
Adăugați la lista de urmărire
500 pcs.
Black (BK) T50SOSASVCOC9-11B-PA66HIRHS-BK 156-03039
Cable tie mount with pipe/tube holder, Wmax=8.8mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
New innovative QwicGrip for fastening to e.g. solar rails with cable ties.
Comparare
QGDHC5.2-8.0M-PA66W-BK 151-04088
Comparare
Adăugați la lista de urmărire
New innovative QwicGrip for fastening to e.g. solar rails with cable ties.
Comparare
Comparare
Adăugați la lista de urmărire
50 pcs.
Black (BK) QGDHC5.2-8.0M-PA66W-BK 151-04088
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, ⌀5.0-60.0mm, black, 25pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Comparare
SBT120-M12-PA66HSUV-BK 157-00021
Comparare
Adăugați la lista de urmărire
Comparare
Comparare
Adăugați la lista de urmărire
25 pcs.
Black (BK) SBT120-M12-PA66HSUV-BK 157-00021
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
Comparare
T50SOSSBD-M6-PA66HSUV-BK 157-00038
Comparare
Adăugați la lista de urmărire
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Black (BK) T50SOSSBD-M6-PA66HSUV-BK 157-00038
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
Comparare
T50SOSSBD-M10-PA66HSW-BK 157-00040
Comparare
Adăugați la lista de urmărire
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Black (BK) T50SOSSBD-M10-PA66HSW-BK 157-00040
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
Comparare
T50SOSSBU-M6-PA66HSUV-GY 157-00065
Comparare
Adăugați la lista de urmărire
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Grey (GY) T50SOSSBU-M6-PA66HSUV-GY 157-00065
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
T50SOSSBU-M8/10 for bundles which run below the stud.
Comparare
T50SOSSBU-M10-PA66HSW-GY 157-00067
Comparare
Adăugați la lista de urmărire
T50SOSSBU-M8/10 for bundles which run below the stud.
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Grey (GY) T50SOSSBU-M10-PA66HSW-GY 157-00067
Fixing tie for stud, outside serrated, ⌀2.0-50.0mm, brown, 2000
Offset design positions bundles away from obstructions, heat or sources of abrasion.
Comparare
T50ROSLPM8SMSO25-PA46-BN 157-00361
Comparare
Adăugați la lista de urmărire
Offset design positions bundles away from obstructions, heat or sources of abrasion.
Comparare
Comparare
Adăugați la lista de urmărire
2000 pcs.
Brown (BN) T50ROSLPM8SMSO25-PA46-BN 157-00361
Cable clip for adhesive use/with pipe/tube holder, Dmin=3.0mm, Dmax=13.0mm
Comparare
RA13-PA66-BK 151-00121
Comparare
Adăugați la lista de urmărire
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Black (BK) RA13-PA66-BK 151-00121
Fixing tie with pipe/tube holder, ⌀30.0mm, black, 500pcs.
Two Piece Fixing Tie T50RCTC5-9FT7 is used when a tubing needs to be fixed in addition to a cable bundle.
Comparare
T50SCTC5-9FT7-PA66HS/PA66HIRHS-BK 156-01551
Comparare
Adăugați la lista de urmărire
Two Piece Fixing Tie T50RCTC5-9FT7 is used when a tubing needs to be fixed in addition to a cable bundle.
Comparare
Comparare
Adăugați la lista de urmărire
500 pcs.
Black (BK) T50SCTC5-9FT7-PA66HS/PA66HIRHS-BK 156-01551
Fixing tie for stud, not serrated, ⌀6.0-23.0mm, black, 500pcs.
FBB one-piece fixing ties for weld studs, can be easly removed by unscrewing in an anti-clockwise direction.
Comparare
FBB100M-PA66HS-BK 150-29100
Comparare
Adăugați la lista de urmărire
FBB one-piece fixing ties for weld studs, can be easly removed by unscrewing in an anti-clockwise direction.
Comparare
Comparare
Adăugați la lista de urmărire
500 pcs.
Black (BK) FBB100M-PA66HS-BK 150-29100
Fixing tie for stud, not serrated, ⌀6.0-50.0mm, black, 500pcs.
FBB one-piece fixing ties for weld studs, can be easly removed by unscrewing in an anti-clockwise direction.
Comparare
FBB185M-PA66HS-BK 150-29180
Comparare
Adăugați la lista de urmărire
FBB one-piece fixing ties for weld studs, can be easly removed by unscrewing in an anti-clockwise direction.
Comparare
Comparare
Adăugați la lista de urmărire
500 pcs.
Black (BK) FBB185M-PA66HS-BK 150-29180
Fixing tie for stud, inside serrated, ⌀9.5-82.5mm, black, 300pcs.
Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.
Comparare
WSI250-PA66HIRHSUV-BK 157-00401
Comparare
Adăugați la lista de urmărire
Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.
Comparare
Comparare
Adăugați la lista de urmărire
300 pcs.
Black (BK) WSI250-PA66HIRHSUV-BK 157-00401
Fixing tie for stud, inside serrated, ⌀9.5-57.1mm, black, 300pcs.
Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.
Comparare
WSS8MM-PA66HIRHSW-BK 157-00034
Comparare
Adăugați la lista de urmărire
Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.
Comparare
Comparare
Adăugați la lista de urmărire
300 pcs.
Black (BK) WSS8MM-PA66HIRHSW-BK 157-00034
Fixing tie for stud, inside serrated, ⌀9.5-82.5mm, black, 300pcs.
Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.
Comparare
WSI8MM-PA66HIRHSUV-BK 157-00035
Comparare
Adăugați la lista de urmărire
Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.
Comparare
Comparare
Adăugați la lista de urmărire
300 pcs.
Black (BK) WSI8MM-PA66HIRHSUV-BK 157-00035
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, grey, 1000pcs.
Head allows for a 0.2
Comparare
T50SOSSB5-High-E-C-CC-PA66HS-GY 157-00151
Comparare
Adăugați la lista de urmărire
Head allows for a 0.2
Comparare
Comparare
Adăugați la lista de urmărire
1000 bag
Grey (GY) T50SOSSB5-High-E-C-CC-PA66HS-GY 157-00151
Fixing tie for stud, outside serrated, ⌀2.0-55.0mm, black, 500pcs.
Comparare
T60ROSSB6HEC-PA66HS-BK 157-00101
Comparare
Adăugați la lista de urmărire
Comparare
Comparare
Adăugați la lista de urmărire
500 pcs.
Black (BK) T60ROSSB6HEC-PA66HS-BK 157-00101
Cable tie mount, T=0.6 - 6.0mm, ⌀6.5 - 7.1 mm, black, 2000pcs.
Comparare
ATSFT6LG-PA66HIRHS-BK 102-67062
Comparare
Adăugați la lista de urmărire
Comparare
Comparare
Adăugați la lista de urmărire
2000 pcs.
Black (BK) ATSFT6LG-PA66HIRHS-BK 102-67062
Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=15.0mm, Dmax=19.0mm, nom⌀=15.0 mm - 19.00 mm
Open Pipe Clip LOC15-19FTOVAL.
Comparare
LOC15-19FTOVAL-PA66HIRHSUV-BK 151-01049
Comparare
Adăugați la lista de urmărire
Open Pipe Clip LOC15-19FTOVAL.
Comparare
Comparare
Adăugați la lista de urmărire
1000 pcs.
Black (BK) LOC15-19FTOVAL-PA66HIRHSUV-BK 151-01049
Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀9.0 x 12.0 mm/9.0 x 14.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10 - 14 mm
LOC1014FT9x12 locking clamp.
Comparare
LOC1014FT9x12-PA66HIRHSUV-BK 151-02218
Comparare
Adăugați la lista de urmărire
LOC1014FT9x12 locking clamp.
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Black (BK) LOC1014FT9x12-PA66HIRHSUV-BK 151-02218
Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=10.5mm, Dmax=13.8mm, nom⌀=12.0 mm
Comparare
MOC12FTOVAL-PA66HIRHSUV-BK 151-01759
Comparare
Adăugați la lista de urmărire
Comparare
Comparare
Adăugați la lista de urmărire
2000 pcs.
Black (BK) MOC12FTOVAL-PA66HIRHSUV-BK 151-01759
Cable clip for edge, T=1.0 - 3.0mm, nom⌀=5.8 - 6.8 mm
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
EdgeClip for edges 1.0 - 3.0 mm, for parallel routing for up to two solar cables.
Comparare
EC1-3SPDHC6-7-PA11/C75S-BK 151-04387
Comparare
Adăugați la lista de urmărire
EdgeClip for edges 1.0 - 3.0 mm, for parallel routing for up to two solar cables.
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Black (BK) EC1-3SPDHC6-7-PA11/C75S-BK 151-04387
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for edge, T=1.0 - 3.0mm, nom⌀=5.8 - 6.8 mm
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
EdgeClip for edges 1.0 - 3.0 mm, for parallel routing for up to two solar cables.
Comparare
EC1-3SVDHC6-7-PA11/C75S-BK 151-04529
Comparare
Adăugați la lista de urmărire
EdgeClip for edges 1.0 - 3.0 mm, for parallel routing for up to two solar cables.
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Black (BK) EC1-3SVDHC6-7-PA11/C75S-BK 151-04529
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for adhesive use/with pipe/tube holder, Dmin=12.70mm, Dmax=19.56mm
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
The self adhesive mount of Ratchet -P-Clamp series creates an incredible bond with mounting surface.
Comparare
IRCBMB5A-PA66HIRHSUV-BK 156-02634
Comparare
Adăugați la lista de urmărire
The self adhesive mount of Ratchet -P-Clamp series creates an incredible bond with mounting surface.
Comparare
Comparare
Adăugați la lista de urmărire
250 pcs.
Black (BK) IRCBMB5A-PA66HIRHSUV-BK 156-02634
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for adhesive use/with pipe/tube holder, Dmax=5.0mm
RB5 self-adhesive clip for a quick and easy installation.
Comparare
RB5-PA66-BK 151-14000
Comparare
Adăugați la lista de urmărire
RB5 self-adhesive clip for a quick and easy installation.
Comparare
Comparare
Adăugați la lista de urmărire
50 pcs.
Black (BK) RB5-PA66-BK 151-14000
Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm
SolidTack Clip RB8APT with special adhesive.
Comparare
RB8APT-PA66-BK 151-00497
Comparare
Adăugați la lista de urmărire
SolidTack Clip RB8APT with special adhesive.
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Black (BK) RB8APT-PA66-BK 151-00497
Cable clip for adhesive use/with pipe/tube holder, Dmax=20.0mm
RB20 self-adhesive clip for a quick and easy installation.
Comparare
RB20-PA66HIRHS-BK 151-00831
Comparare
Adăugați la lista de urmărire
RB20 self-adhesive clip for a quick and easy installation.
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Black (BK) RB20-PA66HIRHS-BK 151-00831
Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀7.0mm, blue, 500pcs.
CNCTC8FT6.5LG Clamps.
Comparare
CNCTC8FT6.5LG-PA66HIRHS-BU 151-01177
Comparare
Adăugați la lista de urmărire
CNCTC8FT6.5LG Clamps.
Comparare
Comparare
Adăugați la lista de urmărire
500 pcs.
Blue (BU) CNCTC8FT6.5LG-PA66HIRHS-BU 151-01177
Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀8.0mm, black, 500pcs.
The tubing is clicked into the CTC clamp and is held firmly.
Comparare
CTC8FT6-PA66HIRHS-BK 151-01543
Comparare
Adăugați la lista de urmărire
The tubing is clicked into the CTC clamp and is held firmly.
Comparare
Comparare
Adăugați la lista de urmărire
500 pcs.
Black (BK) CTC8FT6-PA66HIRHS-BK 151-01543
Harness Clip, automatic close, round hole 6.4 - 7.0 mm, fir tree, high impact modified, heat stabilised, black
Comparare
AHC336FT6LG-PA66HIRHS-BK 151-01376
Comparare
Adăugați la lista de urmărire
Comparare
Comparare
Adăugați la lista de urmărire
700 pcs.
Black (BK) AHC336FT6LG-PA66HIRHS-BK 151-01376
Connector clip for edge, black, 500pcs.
Comparare
CCIIEC6-MOD-PA66HIRHS-BK 151-01124
Comparare
Adăugați la lista de urmărire
Comparare
Comparare
Adăugați la lista de urmărire
500 pcs.
Black (BK) CCIIEC6-MOD-PA66HIRHS-BK 151-01124
Cable clip for screw fixation/with pipe/tube holder, ⌀M8, Dmax=29.0mm
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Screwed Ratchet Clamp SRC150M8 for parallel bundling of cables and tubes.
Comparare
SRC150M8-PA6GF30-BK 156-02742
Comparare
Adăugați la lista de urmărire
Screwed Ratchet Clamp SRC150M8 for parallel bundling of cables and tubes.
Comparare
Comparare
Adăugați la lista de urmărire
150
Black (BK) SRC150M8-PA6GF30-BK 156-02742
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie with pipe/tube holder, inside serrated, ⌀5-30mm, black, 100pcs.
Comparare
T30ROC5J-PA66HSUV-BK 156-00520
Comparare
Adăugați la lista de urmărire
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Black (BK) T30ROC5J-PA66HSUV-BK 156-00520
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Designed with radiused edges to prevent chafing and cutting into insulation.
Comparare
H7P-PA66HS-BK 211-60006
Comparare
Adăugați la lista de urmărire
Designed with radiused edges to prevent chafing and cutting into insulation.
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Black (BK) H7P-PA66HS-BK 211-60006
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Comparare
ALU11-AL-NA 211-10110
Comparare
Adăugați la lista de urmărire
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Natural (NA) ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Comparare
ALU12-AL-NA 211-10120
Comparare
Adăugați la lista de urmărire
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Natural (NA) ALU12-AL-NA 211-10120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Comparare
ALU13-AL-NA 211-10130
Comparare
Adăugați la lista de urmărire
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Natural (NA) ALU13-AL-NA 211-10130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
ALU17C-AL/CR-BK 211-15170
Comparare
Adăugați la lista de urmărire
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Black (BK) ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
ALU19C-AL/CR-BK 211-15190
Comparare
Adăugați la lista de urmărire
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
Comparare
Adăugați la lista de urmărire
50 pcs.
Black (BK) ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
ALU23C P-Clamp with chloroprene insert.
Comparare
ALU23C-AL/CR-BK 211-15230
Comparare
Adăugați la lista de urmărire
ALU23C P-Clamp with chloroprene insert.
Comparare
Comparare
Adăugați la lista de urmărire
50 pcs.
Black (BK) ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
ALU25C-AL/CR-BK 211-15250
Comparare
Adăugați la lista de urmărire
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
Comparare
Adăugați la lista de urmărire
50 pcs.
Black (BK) ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
ALU26C-AL/CR-BK 211-15260
Comparare
Adăugați la lista de urmărire
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
Comparare
Adăugați la lista de urmărire
50 pcs.
Black (BK) ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
ALU28C-AL/CR-BK 211-15280
Comparare
Adăugați la lista de urmărire
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
Comparare
Adăugați la lista de urmărire
50 pcs.
Black (BK) ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
ALU29C-AL/CR-BK 211-15290
Comparare
Adăugați la lista de urmărire
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
Comparare
Adăugați la lista de urmărire
50 pcs.
Black (BK) ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
ALU30C-AL/CR-BK 211-15300
Comparare
Adăugați la lista de urmărire
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
Comparare
Adăugați la lista de urmărire
50 pcs.
Black (BK) ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Comparare
ALU8-AL-NA 211-10080
Comparare
Adăugați la lista de urmărire
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Natural (NA) ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Bundling clip for hole (round)/with pipe/tube holder, L=60.4mm, SO=15.0mm, black, 1000pcs.
Comparare
Halter SFT6.5-PA66HIRHS-BK 133-00067
Comparare
Adăugați la lista de urmărire
Comparare
Comparare
Adăugați la lista de urmărire
1000 pcs.
Black (BK) Halter SFT6.5-PA66HIRHS-BK 133-00067
Fixing tie with pipe/tube holder, inside serrated, ⌀4.0-31.0mm, black, 500pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Comparare
T30ROC1A-PA66HS/PA66HIRHS-BK 156-00012
Comparare
Adăugați la lista de urmărire
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Comparare
Comparare
Adăugați la lista de urmărire
500 pcs.
Black (BK) T30ROC1A-PA66HS/PA66HIRHS-BK 156-00012
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, grey, 500pcs.
2-piece fixing tie with OmegaClip for cables or tubes 10-14 mm, 360 degree twistable.
Comparare
T50SVCOC10-14-PA46-GY 156-01045
Comparare
Adăugați la lista de urmărire
2-piece fixing tie with OmegaClip for cables or tubes 10-14 mm, 360 degree twistable.
Comparare
Comparare
Adăugați la lista de urmărire
500 pcs.
Grey (GY) T50SVCOC10-14-PA46-GY 156-01045
Fixing tie with pipe/tube holder, ⌀15.0-19.0mm, black, 1000pcs.
Comparare
T50SMVCLOC15-19-PA66HIRHSUV-BK 156-01690
Comparare
Adăugați la lista de urmărire
Comparare
Comparare
Adăugați la lista de urmărire
1000 pcs.
Black (BK) T50SMVCLOC15-19-PA66HIRHSUV-BK 156-01690
Fixing tie with pipe/tube holder, ⌀20.0-25.0mm, black, 1000pcs.
The cable tie bundles wires, cables or tubes, and the C-clip snaps onto the tubular frame rail.
Comparare
T50SMVCLOC20-25-PA66HIRHSUV-BK 156-01714
Comparare
Adăugați la lista de urmărire
The cable tie bundles wires, cables or tubes, and the C-clip snaps onto the tubular frame rail.
Comparare
Comparare
Adăugați la lista de urmărire
1000 pcs.
Black (BK) T50SMVCLOC20-25-PA66HIRHSUV-BK 156-01714
Fixing tie with pipe/tube holder, ⌀10.0-14.0mm, black, 1000pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Comparare
T50SMVCLOC10-14-PA66HS/PA66HIRHSUV-BK 156-02383
Comparare
Adăugați la lista de urmărire
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Comparare
Comparare
Adăugați la lista de urmărire
1000 pcs.
Black (BK) T50SMVCLOC10-14-PA66HS/PA66HIRHSUV-BK 156-02383
Corrugated tube clip for stud, nom⌀17.0mm, black, 500pcs.
Fixing element for convoluted tubes 17 mm with stud fixation 6 mm.
Comparare
CTC17SBS6-PA66HIRHS-BK 151-00010
Comparare
Adăugați la lista de urmărire
Fixing element for convoluted tubes 17 mm with stud fixation 6 mm.
Comparare
Comparare
Adăugați la lista de urmărire
500 pcs.
Black (BK) CTC17SBS6-PA66HIRHS-BK 151-00010
Fixing tie with pipe/tube holder, ⌀5.0-27.0mm, black, 500pcs.
2-piece fixing ties with arrowhead, with wings and pipe clip.
Comparare
T50XWPM7.0OC15-18CBTO-SD-PA66HS/PA66HIRHS-BK 156-01035
Comparare
Adăugați la lista de urmărire
2-piece fixing ties with arrowhead, with wings and pipe clip.
Comparare
Comparare
Adăugați la lista de urmărire
500 pcs.
Black (BK) T50XWPM7.0OC15-18CBTO-SD-PA66HS/PA66HIRHS-BK 156-01035
Fixing tie for stud, inside serrated, ⌀9.5-57.1mm, black, 300pcs.
Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.
Comparare
WSS250-PA66HIRHSUV-BK 157-00400
Comparare
Adăugați la lista de urmărire
Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.
Comparare
Comparare
Adăugați la lista de urmărire
300 pcs.
Black (BK) WSS250-PA66HIRHSUV-BK 157-00400
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
Comparare
T50SOSSBD-M8-PA66HSW-BK 157-00039
Comparare
Adăugați la lista de urmărire
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Black (BK) T50SOSSBD-M8-PA66HSW-BK 157-00039
Fixing tie for stud, ⌀3.0-35.0mm, black, 1000pcs.
LFC-Series for routing cables close to the stud.
Comparare
LFC165-2-PA66HS-BK 157-00047
Comparare
Adăugați la lista de urmărire
LFC-Series for routing cables close to the stud.
Comparare
Comparare
Adăugați la lista de urmărire
1000 pcs.
Black (BK) LFC165-2-PA66HS-BK 157-00047
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
Comparare
T50SOSSBU-M8-PA66HSW-GY 157-00066
Comparare
Adăugați la lista de urmărire
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Grey (GY) T50SOSSBU-M8-PA66HSW-GY 157-00066
Fixing tie for stud, inside serrated, ⌀3.0-40.0mm, grey, 500pcs.
SBR8S for M8 threaded studs.
Comparare
SBR8S-PA46-GY 131-60058
Comparare
Adăugați la lista de urmărire
SBR8S for M8 threaded studs.
Comparare
Comparare
Adăugați la lista de urmărire
500 pcs.
Grey (GY) SBR8S-PA46-GY 131-60058
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
One-piece cable tie with oval stud mount.
Comparare
T50SOSSB5-HIGH-E-PA66HS-BK 155-05400
Comparare
Adăugați la lista de urmărire
One-piece cable tie with oval stud mount.
Comparare
Comparare
Adăugați la lista de urmărire
500 pcs.
Black (BK) T50SOSSB5-HIGH-E-PA66HS-BK 155-05400
Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀7.0mm, black, 500pcs.
CNCTC8FT6.5LG Clamps.
Comparare
CNCTC8FT6.5LG-PA66HIRHS-BK 151-01038
Comparare
Adăugați la lista de urmărire
CNCTC8FT6.5LG Clamps.
Comparare
Comparare
Adăugați la lista de urmărire
500 pcs.
Black (BK) CNCTC8FT6.5LG-PA66HIRHS-BK 151-01038
Corrugated tube clip for hole (oval)/with pipe/tube holder, nom⌀14.4mm, black, 500pcs.
Comparare
LC9FTOVAL-PA66HIRHS-BK 151-01880
Comparare
Adăugați la lista de urmărire
Comparare
Comparare
Adăugați la lista de urmărire
500 pcs.
Black (BK) LC9FTOVAL-PA66HIRHS-BK 151-01880
Bundling Clip 34x10 mm, automatic locking, high impact modified, heat stabilised, black
Comparare
AHC25FT6LG-PA66HIRHS-BK 151-01198
Comparare
Adăugați la lista de urmărire
Comparare
Comparare
Adăugați la lista de urmărire
1300 pcs.
Black (BK) AHC25FT6LG-PA66HIRHS-BK 151-01198
Fixing element 35x10 mm, high impact modified, heat stabilised, black
Comparare
AHC223FT6LG-PA66HIRHS-BK 151-01078
Comparare
Adăugați la lista de urmărire
Comparare
Comparare
Adăugați la lista de urmărire
1300 pcs.
Black (BK) AHC223FT6LG-PA66HIRHS-BK 151-01078
Connector clip for edge, black, 1000pcs.
Comparare
EC45-PA66HIRHS-BK 151-00460
Comparare
Adăugați la lista de urmărire
Comparare
Comparare
Adăugați la lista de urmărire
1000 pcs.
Black (BK) EC45-PA66HIRHS-BK 151-00460
Connector clip for edge, black, 1000pcs.
Comparare
EC JAE CC-BK 151-00472
Comparare
Adăugați la lista de urmărire
Comparare
Comparare
Adăugați la lista de urmărire
1000 pcs.
Black (BK) EC JAE CC-BK 151-00472
Connector clip for edge, black, 500pcs.
Comparare
CCEC3.0SV-PA66HIRHS-BK 151-01058
Comparare
Adăugați la lista de urmărire
Comparare
Comparare
Adăugați la lista de urmărire
500 pcs.
Black (BK) CCEC3.0SV-PA66HIRHS-BK 151-01058
Cable clip for adhesive use/with pipe/tube holder, Dmax=5.0mm
RB5 self-adhesive clip for a quick and easy installation.
Comparare
RB5-PA66-NA 151-14059
Comparare
Adăugați la lista de urmărire
RB5 self-adhesive clip for a quick and easy installation.
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Natural (NA) RB5-PA66-NA 151-14059
Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm
Two RB8 adhesive cable clamps shown.
Comparare
RB8-PA66-NA 151-14089
Comparare
Adăugați la lista de urmărire
Two RB8 adhesive cable clamps shown.
Comparare
Comparare
Adăugați la lista de urmărire
5000 pcs.
Natural (NA) RB8-PA66-NA 151-14089
Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm
Two RB8 adhesive cable clamps shown.
Comparare
RB8-PA66-NA 151-13606
Comparare
Adăugați la lista de urmărire
Two RB8 adhesive cable clamps shown.
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Natural (NA) RB8-PA66-NA 151-13606
Cable clip for adhesive use/with pipe/tube holder, Dmin=14.0mm, Dmax=14.0mm
RB14 self-adhesive clip for a quick and easy installation.
Comparare
RB14-PA66-BK 151-00502
Comparare
Adăugați la lista de urmărire
RB14 self-adhesive clip for a quick and easy installation.
Comparare
Comparare
Adăugați la lista de urmărire
200 pcs.
Black (BK) RB14-PA66-BK 151-00502
Cable clip for adhesive use/with pipe/tube holder, Dmax=14.0mm
RB14 self-adhesive clip for a quick and easy installation.
Comparare
RB14-PA66-NA 151-00505
Comparare
Adăugați la lista de urmărire
RB14 self-adhesive clip for a quick and easy installation.
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Natural (NA) RB14-PA66-NA 151-00505
Cable clip for adhesive use/with pipe/tube holder, Dmax=18.0mm
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Self adhesive one piece fixing clips RA- & RB-Series.
Comparare
RA18-PA66-NA 151-13119
Comparare
Adăugați la lista de urmărire
Self adhesive one piece fixing clips RA- & RB-Series.
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Natural (NA) RA18-PA66-NA 151-13119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 250pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Comparare
T50SVCOC39-45-PA66HS/PA66HIRHS-BK 156-00137
Comparare
Adăugați la lista de urmărire
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Comparare
Comparare
Adăugați la lista de urmărire
250 pcs.
Black (BK) T50SVCOC39-45-PA66HS/PA66HIRHS-BK 156-00137
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-50.0mm, black, 250pcs.
Comparare
T50SMVCOC25-31-PA66HS/PA66HIRHS-BK 156-00303
Comparare
Adăugați la lista de urmărire
Comparare
Comparare
Adăugați la lista de urmărire
250 pcs.
Black (BK) T50SMVCOC25-31-PA66HS/PA66HIRHS-BK 156-00303
Fixing tie for cable bundles/with pipe/tube holder, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
Reusable clip with Cable tie for multiple bundling of cables in different directions and suitable for pre-installation and replacement in case of maintenance.
Comparare
T50ROC1A-PA66HS/PA66HIRHS-BK 156-00036
Comparare
Adăugați la lista de urmărire
Reusable clip with Cable tie for multiple bundling of cables in different directions and suitable for pre-installation and replacement in case of maintenance.
Comparare
Comparare
Adăugați la lista de urmărire
500 pcs.
Black (BK) T50ROC1A-PA66HS/PA66HIRHS-BK 156-00036
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Comparare
ALU10-AL-NA 211-10100
Comparare
Adăugați la lista de urmărire
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Natural (NA) ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
ALU11C-AL/CR-BK 211-15110
Comparare
Adăugați la lista de urmărire
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Black (BK) ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
ALU13C-AL/CR-BK 211-15130
Comparare
Adăugați la lista de urmărire
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Black (BK) ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
ALU14C-AL/CR-BK 211-15140
Comparare
Adăugați la lista de urmărire
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Black (BK) ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
ALU16C-AL/CR-BK 211-15160
Comparare
Adăugați la lista de urmărire
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Black (BK) ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
ALU18C-AL/CR-BK 211-15180
Comparare
Adăugați la lista de urmărire
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Black (BK) ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
ALU20C-AL/CR-BK 211-15200
Comparare
Adăugați la lista de urmărire
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
Comparare
Adăugați la lista de urmărire
50 pcs.
Black (BK) ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
ALU22C-AL/CR-BK 211-15220
Comparare
Adăugați la lista de urmărire
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
Comparare
Adăugați la lista de urmărire
50 pcs.
Black (BK) ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
ALU24C-AL/CR-BK 211-15240
Comparare
Adăugați la lista de urmărire
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
Comparare
Adăugați la lista de urmărire
50 pcs.
Black (BK) ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Comparare
ALU4-AL-NA 211-10040
Comparare
Adăugați la lista de urmărire
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Natural (NA) ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
ALU4C-AL/CR-BK 211-15040
Comparare
Adăugați la lista de urmărire
P-Clips (Alu) with Rubber Insert for vibration resistance
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Black (BK) ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Comparare
ALU5-AL-NA 211-10050
Comparare
Adăugați la lista de urmărire
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Comparare
Comparare
Adăugați la lista de urmărire
100 pcs.
Natural (NA) ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Rezultate pentru "cable holder" în Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

  Romania

Rețele sociale

© HellermannTyton 2026 (v4.312.3)  |  Actualizare: 16/08/2026  |  Setări de confidențialitate
Distribuitori locali Contact