Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
08/11/2025

Rezultatov iskanja za "Shipbuilding"

2.710 najdeni proizvodi 1 further hit
Rezultati iskanja v kategorijah:
Cable Ties and Fixings

Cable Ties and Fixings  (906)

Cable Ties Inside Serrated  (291) Cable Ties Outside Serrated  (29) Cable Ties, Releasable  (24) Cable Ties, Stainless Steel  (84) Cable Ties With Fixing Elements  (97) Cable Tie Mounts  (114) Fixing Elements  (23) Clips, Clamps and Plugs  (261)
Cable Ties and Fixings
Cable Ties and Fixings (906)
Insulation

Insulation  (578)

Heat Shrink Tubing  (444) Heat Shrinkable Moulded Shapes  (136) Insulating tubes  (3)
Insulation
Insulation (578)
Cable Protection Systems

Cable Protection Systems  (129)

Spiral-Reinforced Conduit Systems  (16) Protective Tubing and Spiral Binding  (60) Expandable Braided Sleeves  (27) Open Woven Sleeves  (52) Wiring Ducts and Accessories  (1)
Cable Protection Systems
Cable Protection Systems (129)
Electrical Installation

Electrical Installation  (201)

Wire Connectors  (21) Cable Rods  (2) Electrical Tapes  (91) Cast Resin Technology  (82) Gel Technology  (2) Chemicals  (3)
Electrical Installation
Electrical Installation (201)
Identification Systems

Identification Systems  (842)

Wire and Cable Markers  (681) Control Panel Labelling  (50) Industrial Identification  (40) RFID tags and cable ties  (56) Hazardous Area Identification  (48) Printers and Software  (19)
Identification Systems
Identification Systems (842)
Application Tooling

Application Tooling  (57)

Automatic Cable Tying System  (18) Application Tooling for Cable Ties  (20) Application Tooling for Snappers  (2) Application Tooling for Heat Shrinkable Tubing  (4) Application Tooling for Non Shrinkable Tubing  (12) Application Tooling for Braided Sleeves  (1)
Application Tooling
Application Tooling (57)
2.710 najdeni proizvodi
Ponastavi vse
Cable tie inside serrated, 202.0x4.6mm, ⌀1.5-50.0mm, natural, 100pcs.
Head design guarantees high tensile strength and a low insertion force.
Primerjava
Cable tie inside serrated, 202.0x4.6mm, ⌀1.5-50.0mm, natural, 100pcs.
T50R-PA66-NA 112-05019
Primerjava
Ne pozabite
100 pcs.
Natural (NA) T50R-PA66-NA 112-05019
Cable tie inside serrated, 200x4.6mm, ⌀1.5-50.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 200x4.6mm, ⌀1.5-50.0mm, black, 100pcs.
T50R-PA66-BK 111-05000
Primerjava
Ne pozabite
100 pcs.
Black (BK) T50R-PA66-BK 111-05000
Cable tie inside serrated, 200x4.6mm, ⌀1.5-50.0mm, natural, 100pcs.
Primerjava
Cable tie inside serrated, 200x4.6mm, ⌀1.5-50.0mm, natural, 100pcs.
T50R-PA66-NA 111-05013
Primerjava
Ne pozabite
100 pcs.
Natural (NA) T50R-PA66-NA 111-05013
Cable tie inside serrated, 200x4.6mm, ⌀1.5-50.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 200x4.6mm, ⌀1.5-50.0mm, black, 100pcs.
T50R-PA66W-BK 111-01964
Primerjava
Ne pozabite
100 pcs.
Black (BK) T50R-PA66W-BK 111-01964
Cable tie inside serrated, 202.0x4.7mm, ⌀8.0-50.0mm, grey, 100pcs.
The PVDF tie is coloured grey in order to visibly distinguish it easily from other materials.
Primerjava
Cable tie inside serrated, 202.0x4.7mm, ⌀8.0-50.0mm, grey, 100pcs.
T50R-PVDF-GY 111-02390
Primerjava
Ne pozabite
100 pcs.
Grey (GY) T50R-PVDF-GY 111-02390
Cable tie inside serrated, 202.0x4.7mm, ⌀8.0-50.0mm, grey, 3000pcs.
The PVDF tie is coloured grey in order to visibly distinguish it easily from other materials.
Primerjava
Cable tie inside serrated, 202.0x4.7mm, ⌀8.0-50.0mm, grey, 3000pcs.
T50R-PVDF-GY 111-02447
Primerjava
Ne pozabite
3000 pcs.
Grey (GY) T50R-PVDF-GY 111-02447
Cable tie inside serrated, 390x4.7mm, ⌀1.5-110mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 390x4.7mm, ⌀1.5-110mm, black, 100pcs.
T80L-PA66-BK 111-05410
Primerjava
Ne pozabite
100 pcs.
Black (BK) T80L-PA66-BK 111-05410
Cable tie inside serrated, 387x7.6mm, ⌀3.0-100mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 387x7.6mm, ⌀3.0-100mm, black, 100pcs.
T120R(E)-PA66-BK 111-12010
Primerjava
Ne pozabite
100 pcs.
Black (BK) T120R(E)-PA66-BK 111-12010
Slit cable cover, Dmax=27mm, -60 °C to +110 °C, intermittent +140 °C, black, 2m
HelaWrap Cable Cover - HWPP - black.
Primerjava
Slit cable cover, Dmax=27mm, -60 °C to +110 °C, intermittent +140 °C, black, 2m
HWPP25L2-PP-BK 161-64404
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
1 pack
Black (BK) HWPP25L2-PP-BK 161-64404
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable label, self laminating, UV resistant/self-laminating, white/transparent, thermal transfer print, 60.00x31.75mm, H2=228.6mm, 400pcs.
Helatag 1232 – self-laminating labels with good resistance to alcohol and hydraulic oils.
Primerjava
Cable label, self laminating, UV resistant/self-laminating, white/transparent, thermal transfer print, 60.00x31.75mm, H2=228.6mm, 400pcs.
TAG32-230TD1-1232-CL/WH 596-01903
Primerjava
Ne pozabite
400 pcs.
White (WH), Transparent (CL) TAG32-230TD1-1232-CL/WH 596-01903
Cable label, self laminating, UV resistant/self-laminating, white/transparent, thermal transfer print, 39.87x31.75mm, H2=134.62mm, 650pcs.
Helatag 1232 – self-laminating labels with good resistance to alcohol and hydraulic oils.
Primerjava
Cable label, self laminating, UV resistant/self-laminating, white/transparent, thermal transfer print, 39.87x31.75mm, H2=134.62mm, 650pcs.
TAG32-135TD1-1232-CL/WH 596-01904
Primerjava
Ne pozabite
650 pcs.
White (WH), Transparent (CL) TAG32-135TD1-1232-CL/WH 596-01904
Cable label, self laminating, Refill pack, self-laminating/chemical resistance, white/transparent, manual marking, 12.70x12.70mm, H2=38.10mm, 200pcs.
Refill packs for RiteOn label dispenser.
Primerjava
Cable label, self laminating, Refill pack, self-laminating/chemical resistance, white/transparent, manual marking, 12.70x12.70mm, H2=38.10mm, 200pcs.
RO201REF-1401-CL/WH 550-14014
Primerjava
Ne pozabite
200 pack
White (WH), Transparent (CL) RO201REF-1401-CL/WH 550-14014
Cable label, self laminating, Refill pack, self-laminating/chemical resistance, white/transparent, manual marking, 12.70x19.05mm, H2=50.80mm, 150pcs.
Refill packs for RiteOn label dispenser.
Primerjava
Cable label, self laminating, Refill pack, self-laminating/chemical resistance, white/transparent, manual marking, 12.70x19.05mm, H2=50.80mm, 150pcs.
RO202REF-1401-CL/WH 550-11401
Primerjava
Ne pozabite
150 pack
White (WH), Transparent (CL) RO202REF-1401-CL/WH 550-11401
Cable label, self laminating, Refill pack, self-laminating/chemical resistance, white/transparent, manual marking, 25.40x19.05mm, H2=76.20mm, 100pcs.
Refill packs for RiteOn label dispenser.
Primerjava
Cable label, self laminating, Refill pack, self-laminating/chemical resistance, white/transparent, manual marking, 25.40x19.05mm, H2=76.20mm, 100pcs.
RO203REF-1401-CL/WH 550-71401
Primerjava
Ne pozabite
100 pack
White (WH), Transparent (CL) RO203REF-1401-CL/WH 550-71401
Cable clip for adhesive use/with pipe/tube holder, Dmax=13.0mm
Self adhesive one piece fixing clips RA- & RB-Series.
Primerjava
Cable clip for adhesive use/with pipe/tube holder, Dmax=13.0mm
RA13-PA66-NA 151-13021
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) RA13-PA66-NA 151-13021
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for adhesive use/with pipe/tube holder, Dmax=6.0mm
RA6 self-adhesive clip for a quick and easy installation.
Primerjava
Cable clip for adhesive use/with pipe/tube holder, Dmax=6.0mm
RA6-PA66-NA 151-13019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) RA6-PA66-NA 151-13019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for adhesive use/with pipe/tube holder, Dmax=9.0mm
Self adhesive one piece fixing clips RA- & RB-Series.
Primerjava
Cable clip for adhesive use/with pipe/tube holder, Dmax=9.0mm
RA9-PA66-NA 151-13020
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) RA9-PA66-NA 151-13020
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for adhesive use/with pipe/tube holder, Dmax=5.0mm
RB5 self-adhesive clip for a quick and easy installation.
Primerjava
Cable clip for adhesive use/with pipe/tube holder, Dmax=5.0mm
RB5-PA66-NA 151-14059
Primerjava
Ne pozabite
100 pcs.
Natural (NA) RB5-PA66-NA 151-14059
Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm
Two RB8 adhesive cable clamps shown.
Primerjava
Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm
RB8-PA66-NA 151-14089
Primerjava
Ne pozabite
5000 pcs.
Natural (NA) RB8-PA66-NA 151-14089
Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm
Two RB8 adhesive cable clamps shown.
Primerjava
Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm
RB8-PA66-NA 151-13606
Primerjava
Ne pozabite
100 pcs.
Natural (NA) RB8-PA66-NA 151-13606
Cable clip for adhesive use/with pipe/tube holder, Dmax=14.0mm
RB14 self-adhesive clip for a quick and easy installation.
Primerjava
Cable clip for adhesive use/with pipe/tube holder, Dmax=14.0mm
RB14-PA66-NA 151-00505
Primerjava
Ne pozabite
100 pcs.
Natural (NA) RB14-PA66-NA 151-00505
Cable clip for adhesive use/with pipe/tube holder, ⌀3.2 mm, Dmax=3.0mm
Ideal for holding ribbon cables in computer equipment, gaming machines or domestic appliances.
Primerjava
Cable clip for adhesive use/with pipe/tube holder, ⌀3.2 mm, Dmax=3.0mm
TY8H1S-PA66-NA 151-12819
Primerjava
Ne pozabite
100 pcs.
Natural (NA) TY8H1S-PA66-NA 151-12819
P-clamp closed, Dmax=17.5mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Primerjava
P-clamp closed, Dmax=17.5mm, ⌀4.2 mm, natural, 1000pcs.
H10P-PA66-NA 211-60109
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
1000 pcs.
Natural (NA) H10P-PA66-NA 211-60109
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=20.5mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Primerjava
P-clamp closed, Dmax=20.5mm, ⌀4.2 mm, natural, 1000pcs.
H12P-PA66-NA 211-60129
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
1000 pcs.
Natural (NA) H12P-PA66-NA 211-60129
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Primerjava
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.
H5P-PA66HS-BK 211-60004
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) H5P-PA66HS-BK 211-60004
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Primerjava
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
50 pcs.
Black (BK) ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
50 pcs.
Black (BK) ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Primerjava
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Primerjava
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Primerjava
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Primerjava
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Label, durable/UV resistant, white, thermal transfer print, 18.0mm, 25m
Helatag 1220 Series, white panel plate labels.
Primerjava
Label, durable/UV resistant, white, thermal transfer print, 18.0mm, 25m
TAGR18TDK1-1220-WH 596-00760
Primerjava
Ne pozabite
25 metre
White (WH) TAGR18TDK1-1220-WH 596-00760
Label, durable/UV resistant, white, thermal transfer print, 40.0mm, 25m
Helatag 1220 Series, white panel plate labels.
Primerjava
Label, durable/UV resistant, white, thermal transfer print, 40.0mm, 25m
TAGR40TDK1-1220-WH 596-00761
Primerjava
Ne pozabite
25 metre
White (WH) TAGR40TDK1-1220-WH 596-00761
Label, durable/UV resistant, white, thermal transfer print, 9x17mm, 1000pcs.
Helatag 1220 Series, white panel plate labels.
Primerjava
Label, durable/UV resistant, white, thermal transfer print, 9x17mm, 1000pcs.
TAG17-09TDK1-1220-WH 596-00592
Primerjava
Ne pozabite
1000 pcs.
White (WH) TAG17-09TDK1-1220-WH 596-00592
Label, durable/UV resistant, white, thermal transfer print, 15.00x49.00mm, 1000pcs.
Helatag 1220 Series, white panel plate labels.
Primerjava
Label, durable/UV resistant, white, thermal transfer print, 15.00x49.00mm, 1000pcs.
TAG49-15TDK1-1220-WH 596-12622
Primerjava
Ne pozabite
1000 pcs.
White (WH) TAG49-15TDK1-1220-WH 596-12622
Label, durable/UV resistant, white, thermal transfer print, 12.00x18.00mm, 1000pcs.
Helatag 1220 Series, white panel plate labels.
Primerjava
Label, durable/UV resistant, white, thermal transfer print, 12.00x18.00mm, 1000pcs.
TAG18-12TDK1-1220-WH 596-01070
Primerjava
Ne pozabite
1000 reel
White (WH) TAG18-12TDK1-1220-WH 596-01070
Label, durable/UV resistant, silver, thermal transfer print, 18x27mm, 1000pcs.
Helatag 1221 Series, silver panel plate labels.
Primerjava
Label, durable/UV resistant, silver, thermal transfer print, 18x27mm, 1000pcs.
TAG27-18TDK1-1221-SR 596-00578
Primerjava
Ne pozabite
1000 reel
Silver (SR) TAG27-18TDK1-1221-SR 596-00578
Cable marker, to identify: wire and cable/for sliding, laser print "B", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "B", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 B-PVC-YE 515-01024
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC1-3 B-PVC-YE 515-01024
Cable marker, to identify: wire and cable/for sliding, laser print "C", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "C", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 C-PVC-YE 515-01034
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC1-3 C-PVC-YE 515-01034
Cable marker, to identify: wire and cable/for sliding, laser print "D", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "D", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 D-PVC-YE 515-01044
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC1-3 D-PVC-YE 515-01044
Cable marker, to identify: wire and cable/for sliding, laser print "E", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "E", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 E-PVC-YE 515-01054
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC1-3 E-PVC-YE 515-01054
Cable marker, to identify: wire and cable/for sliding, laser print "F", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "F", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 F-PVC-YE 515-01064
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC1-3 F-PVC-YE 515-01064
Cable marker, to identify: wire and cable/for sliding, laser print "G", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "G", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 G-PVC-YE 515-01074
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC1-3 G-PVC-YE 515-01074
Cable marker, to identify: wire and cable/for sliding, laser print "H", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "H", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 H-PVC-YE 515-01084
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC1-3 H-PVC-YE 515-01084
Cable marker, to identify: wire and cable/for sliding, laser print "I", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "I", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 I-PVC-YE 515-01094
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC1-3 I-PVC-YE 515-01094
Cable marker, to identify: wire and cable/for sliding, laser print "J", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "J", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 J-PVC-YE 515-01104
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC1-3 J-PVC-YE 515-01104
Cable marker, to identify: wire and cable/for sliding, laser print "K", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "K", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 K-PVC-YE 515-01114
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC1-3 K-PVC-YE 515-01114
Cable marker, to identify: wire and cable/for sliding, laser print "L", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "L", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 L-PVC-YE 515-01124
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC1-3 L-PVC-YE 515-01124
Cable marker, to identify: wire and cable/for sliding, laser print "M", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "M", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 M-PVC-YE 515-01134
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC1-3 M-PVC-YE 515-01134
Cable marker, to identify: wire and cable/for sliding, laser print "N", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "N", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 N-PVC-YE 515-01144
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC1-3 N-PVC-YE 515-01144
Cable marker, to identify: wire and cable/for sliding, laser print "O", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "O", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 O-PVC-YE 515-01154
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC1-3 O-PVC-YE 515-01154
Cable marker, to identify: wire and cable/for sliding, laser print "P", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "P", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 P-PVC-YE 515-01164
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC1-3 P-PVC-YE 515-01164
Cable marker, to identify: wire and cable/for sliding, laser print "Q", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "Q", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 Q-PVC-YE 515-01174
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC1-3 Q-PVC-YE 515-01174
Cable marker, to identify: wire and cable/for sliding, laser print "R", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "R", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 R-PVC-YE 515-01184
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC1-3 R-PVC-YE 515-01184
Cable marker, to identify: wire and cable/for sliding, laser print "S", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "S", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 S-PVC-YE 515-01194
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC1-3 S-PVC-YE 515-01194
Cable marker, to identify: wire and cable/for sliding, laser print "T", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "T", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 T-PVC-YE 515-01204
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC1-3 T-PVC-YE 515-01204
Cable marker, to identify: wire and cable/for sliding, laser print "U", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "U", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 U-PVC-YE 515-01214
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC1-3 U-PVC-YE 515-01214
Cable marker, to identify: wire and cable/for sliding, laser print "V", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "V", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 V-PVC-YE 515-01224
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC1-3 V-PVC-YE 515-01224
Cable marker, to identify: wire and cable/for sliding, laser print "W", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "W", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 W-PVC-YE 515-01234
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC1-3 W-PVC-YE 515-01234
Cable marker, to identify: wire and cable/for sliding, laser print "X", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "X", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 X-PVC-YE 515-01244
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC1-3 X-PVC-YE 515-01244
Cable marker, to identify: wire and cable/for sliding, laser print "Y", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "Y", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 Y-PVC-YE 515-01254
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC1-3 Y-PVC-YE 515-01254
Cable marker, to identify: wire and cable/for sliding, laser print "Z", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "Z", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 Z-PVC-YE 515-01264
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC1-3 Z-PVC-YE 515-01264
Cable marker, to identify: wire and cable/for sliding, laser print "+", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "+", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 +-PVC-YE 515-01704
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC1-3 +-PVC-YE 515-01704
Cable marker, to identify: wire and cable/for sliding, laser print "-", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "-", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 -PVC-YE 515-01714
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC1-3 -PVC-YE 515-01714
Cable marker, to identify: wire and cable/for sliding, laser print "⏚", ⌀1.0-3.0mm, yellow, reel=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "⏚", ⌀1.0-3.0mm, yellow, reel=1000pcs.
HGDC1-3 Earth-PVC-YE 515-01734
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC1-3 Earth-PVC-YE 515-01734
Cable marker, to identify: wire and cable/for sliding, hotfoil print "0", ⌀1.0-3.0mm, black, reel=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, hotfoil print "0", ⌀1.0-3.0mm, black, reel=1000pcs.
HGDC1-3 0-PVC-BK 515-01600
Primerjava
Ne pozabite
1000 pcs.
Black (BK) HGDC1-3 0-PVC-BK 515-01600
Cable marker, to identify: wire and cable/for sliding, hotfoil print "1", ⌀1.0-3.0mm, brown, reel=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, hotfoil print "1", ⌀1.0-3.0mm, brown, reel=1000pcs.
HGDC1-3 1-PVC-BN 515-01611
Primerjava
Ne pozabite
1000 pcs.
Brown (BN) HGDC1-3 1-PVC-BN 515-01611
Cable marker, to identify: wire and cable/for sliding, hotfoil print "2", ⌀1.0-3.0mm, red, reel=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, hotfoil print "2", ⌀1.0-3.0mm, red, reel=1000pcs.
HGDC1-3 2-PVC-RD 515-01622
Primerjava
Ne pozabite
1000 pcs.
Red (RD) HGDC1-3 2-PVC-RD 515-01622
Cable marker, to identify: wire and cable/for sliding, hotfoil print "3", ⌀1.0-3.0mm, orange, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, hotfoil print "3", ⌀1.0-3.0mm, orange, pcs.=1000pcs.
HGDC1-3 3-PVC-OG 515-01633
Primerjava
Ne pozabite
1000 pcs.
Orange (OG) HGDC1-3 3-PVC-OG 515-01633
Cable marker, to identify: wire and cable/for sliding, hotfoil print "5", ⌀1.0-3.0mm, green, reel=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, hotfoil print "5", ⌀1.0-3.0mm, green, reel=1000pcs.
HGDC1-3 5-PVC-GN 515-01655
Primerjava
Ne pozabite
1000 pcs.
Green (GN) HGDC1-3 5-PVC-GN 515-01655
Cable marker, to identify: wire and cable/for sliding, hotfoil print "6", ⌀1.0-3.0mm, blue, reel=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, hotfoil print "6", ⌀1.0-3.0mm, blue, reel=1000pcs.
HGDC1-3 6-PVC-BU 515-01666
Primerjava
Ne pozabite
1000 pcs.
Blue (BU) HGDC1-3 6-PVC-BU 515-01666
Cable marker, to identify: wire and cable/for sliding, hotfoil print "7", ⌀1.0-3.0mm, violet, reel=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, hotfoil print "7", ⌀1.0-3.0mm, violet, reel=1000pcs.
HGDC1-3 7-PVC-VT 515-01677
Primerjava
Ne pozabite
1000 pcs.
Violet (VT) HGDC1-3 7-PVC-VT 515-01677
Cable marker, to identify: wire and cable/for sliding, hotfoil print "8", ⌀1.0-3.0mm, grey, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, hotfoil print "8", ⌀1.0-3.0mm, grey, pcs.=1000pcs.
HGDC1-3 8-PVC-GY 515-01688
Primerjava
Ne pozabite
1000 pcs.
Grey (GY) HGDC1-3 8-PVC-GY 515-01688
Cable marker, to identify: wire and cable/for sliding, laser print "9", ⌀1.0-3.0mm, white, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "9", ⌀1.0-3.0mm, white, pcs.=1000pcs.
HGDC1-3 9-PVC-WH 515-01699
Primerjava
Ne pozabite
1000 pcs.
White (WH) HGDC1-3 9-PVC-WH 515-01699
Cable marker, to identify: wire and cable/for sliding, laser print "A", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "A", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
HGDC2-5 A-PVC-YE 515-02014
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC2-5 A-PVC-YE 515-02014
Cable marker, to identify: wire and cable/for sliding, laser print "B", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "B", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
HGDC2-5 B-PVC-YE 515-02024
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC2-5 B-PVC-YE 515-02024
Cable marker, to identify: wire and cable/for sliding, laser print "C", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "C", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
HGDC2-5 C-PVC-YE 515-02034
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC2-5 C-PVC-YE 515-02034
Cable marker, to identify: wire and cable/for sliding, laser print "D", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "D", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
HGDC2-5 D-PVC-YE 515-02044
Primerjava
Ne pozabite
1000 reel
Yellow (YE) HGDC2-5 D-PVC-YE 515-02044
Cable marker, to identify: wire and cable/for sliding, laser print "E", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "E", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
HGDC2-5 E-PVC-YE 515-02054
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC2-5 E-PVC-YE 515-02054
Cable marker, to identify: wire and cable/for sliding, laser print "F", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "F", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
HGDC2-5 F-PVC-YE 515-02064
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC2-5 F-PVC-YE 515-02064
Cable marker, to identify: wire and cable/for sliding, laser print "G", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "G", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
HGDC2-5 G-PVC-YE 515-02074
Primerjava
Ne pozabite
1000 reel
Yellow (YE) HGDC2-5 G-PVC-YE 515-02074
Cable marker, to identify: wire and cable/for sliding, laser print "H", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "H", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
HGDC2-5 H-PVC-YE 515-02084
Primerjava
Ne pozabite
1000 reel
Yellow (YE) HGDC2-5 H-PVC-YE 515-02084
Cable marker, to identify: wire and cable/for sliding, laser print "I", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "I", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
HGDC2-5 I-PVC-YE 515-02094
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC2-5 I-PVC-YE 515-02094
Cable marker, to identify: wire and cable/for sliding, laser print "K", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "K", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
HGDC2-5 K-PVC-YE 515-02114
Primerjava
Ne pozabite
1000 reel
Yellow (YE) HGDC2-5 K-PVC-YE 515-02114
Cable marker, to identify: wire and cable/for sliding, laser print "L", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "L", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
HGDC2-5 L-PVC-YE 515-02124
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC2-5 L-PVC-YE 515-02124
Cable marker, to identify: wire and cable/for sliding, laser print "M", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "M", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
HGDC2-5 M-PVC-YE 515-02134
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC2-5 M-PVC-YE 515-02134
Cable marker, to identify: wire and cable/for sliding, laser print "N", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "N", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
HGDC2-5 N-PVC-YE 515-02144
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC2-5 N-PVC-YE 515-02144
Cable marker, to identify: wire and cable/for sliding, laser print "O", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "O", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
HGDC2-5 O-PVC-YE 515-02154
Primerjava
Ne pozabite
1000 reel
Yellow (YE) HGDC2-5 O-PVC-YE 515-02154
Cable marker, to identify: wire and cable/for sliding, laser print "P", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "P", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
HGDC2-5 P-PVC-YE 515-02164
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC2-5 P-PVC-YE 515-02164
Cable marker, to identify: wire and cable/for sliding, laser print "Q", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "Q", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
HGDC2-5 Q-PVC-YE 515-02174
Primerjava
Ne pozabite
1000 reel
Yellow (YE) HGDC2-5 Q-PVC-YE 515-02174
Cable marker, to identify: wire and cable/for sliding, laser print "R", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "R", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
HGDC2-5 R-PVC-YE 515-02184
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC2-5 R-PVC-YE 515-02184
Cable marker, to identify: wire and cable/for sliding, laser print "S", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "S", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
HGDC2-5 S-PVC-YE 515-02194
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HGDC2-5 S-PVC-YE 515-02194
Facebook  Instagram  X  YouTube  LinkedIn  Link Corporate Blog 
Kontakt Pogoji Podatki o podjetju Navodila in zaveze Izjava o zasebnosti Zemljevid spletnega mesta Novice
Update: 02/11/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.291.3) | Update: 02/11/2025 | Nastavitve zasebnosti
Iskanje prodajalca Kontakt