Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
23/12/2025

Rezultatov iskanja za "Shipbuilding"

2.691 najdeni proizvodi 1 further hit
Rezultati iskanja v kategorijah:
Cable Ties and Fixings

Cable Ties and Fixings  (903)

Cable Ties Inside Serrated  (293) Cable Ties Outside Serrated  (29) Cable Ties, Releasable  (24) Cable Ties, Stainless Steel  (84) Cable Ties With Fixing Elements  (97) Cable Tie Mounts  (109) Fixing Elements  (23) Clips, Clamps and Plugs  (261)
Cable Ties and Fixings
Cable Ties and Fixings (903)
Insulation

Insulation  (578)

Heat Shrink Tubing  (444) Heat Shrinkable Moulded Shapes  (136) Insulating tubes  (3)
Insulation
Insulation (578)
Cable Protection Systems

Cable Protection Systems  (113)

Spiral-Reinforced Conduit Systems  (16) Protective Tubing and Spiral Binding  (53) Expandable Braided Sleeves  (18) Open Woven Sleeves  (43) Wiring Ducts and Accessories  (1)
Cable Protection Systems
Cable Protection Systems (113)
Electrical Installation

Electrical Installation  (201)

Wire Connectors  (21) Cable Rods  (2) Electrical Tapes  (91) Cast Resin Technology  (82) Gel Technology  (2) Chemicals  (3)
Electrical Installation
Electrical Installation (201)
Identification Systems

Identification Systems  (842)

Wire and Cable Markers  (681) Control Panel Labelling  (50) Industrial Identification  (40) RFID tags and cable ties  (56) Hazardous Area Identification  (48) Printers and Software  (19)
Identification Systems
Identification Systems (842)
Application Tooling

Application Tooling  (57)

Automatic Cable Tying System  (18) Application Tooling for Cable Ties  (20) Application Tooling for Snappers  (2) Application Tooling for Heat Shrinkable Tubing  (4) Application Tooling for Non Shrinkable Tubing  (12) Application Tooling for Braided Sleeves  (1)
Application Tooling
Application Tooling (57)
2.691 najdeni proizvodi
Ponastavi vse
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 180°, black, 140pcs.
Primerjava
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 180°, black, 140pcs.
RCD180LM12-PA66HIRHSUV/ST/ZN-BK 151-01508
Primerjava
Ne pozabite
140 pcs.
Black (BK) RCD180LM12-PA66HIRHSUV/ST/ZN-BK 151-01508
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 140pcs.
Primerjava
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 140pcs.
RCD180LM6-PA66HIRHSUV/ST/ZN-BK 151-01663
Primerjava
Ne pozabite
140 pcs.
Black (BK) RCD180LM6-PA66HIRHSUV/ST/ZN-BK 151-01663
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 140pcs.
Primerjava
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 140pcs.
RCD180LM8-PA66HIRHSUV/ST/ZN-BK 151-01506
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
140 pcs.
Black (BK) RCD180LM8-PA66HIRHSUV/ST/ZN-BK 151-01506
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 140pcs.
Primerjava
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 140pcs.
RCD180LM8SS-PA666V0/SS304-BK 151-02735
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
140 pcs.
Black (BK) RCD180LM8SS-PA666V0/SS304-BK 151-02735
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 180°, black, 140pcs.
RCD180MM10.
Primerjava
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 180°, black, 140pcs.
RCD180MM10-PA66HIRHSUV/ST/ZN-BK 151-01504
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
140 pcs.
Black (BK) RCD180MM10-PA66HIRHSUV/ST/ZN-BK 151-01504
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 180°, black, 140pcs.
Primerjava
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 180°, black, 140pcs.
RCD180MM12-PA66HIRHSUV/ST/ZN-BK 151-01505
Primerjava
Ne pozabite
140 pcs.
Black (BK) RCD180MM12-PA66HIRHSUV/ST/ZN-BK 151-01505
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 140pcs.
Primerjava
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 140pcs.
RCD180MM6-PA66HIRHSUV/ST/ZN-BK 151-01662
Primerjava
Ne pozabite
140 pcs.
Black (BK) RCD180MM6-PA66HIRHSUV/ST/ZN-BK 151-01662
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 140pcs.
Primerjava
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 140pcs.
RCD180MM8-PA66HIRHSUV/ST/ZN-BK 151-01503
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
140 pcs.
Black (BK) RCD180MM8-PA66HIRHSUV/ST/ZN-BK 151-01503
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 140pcs.
Primerjava
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 140pcs.
RCD180MM8SS-PA666V0/SS304-BK 151-03111
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
140 pcs.
Black (BK) RCD180MM8SS-PA666V0/SS304-BK 151-03111
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.4 mm, 180°, black, 160pcs.
RCD180SM10.
Primerjava
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.4 mm, 180°, black, 160pcs.
RCD180SM10SS-PA666V0/SS304-BK 151-03008
Primerjava
Ne pozabite
160
Black (BK) RCD180SM10SS-PA666V0/SS304-BK 151-03008
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 180°, black, 160pcs.
Primerjava
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 180°, black, 160pcs.
RCD180SM12-PA66HIRHSUV/ST/ZN-BK 151-01502
Primerjava
Ne pozabite
160 pcs.
Black (BK) RCD180SM12-PA66HIRHSUV/ST/ZN-BK 151-01502
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 160pcs.
Primerjava
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 160pcs.
RCD180SM6-PA66HIRHSUV/ST/ZN-BK 151-01661
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
160 pcs.
Black (BK) RCD180SM6-PA66HIRHSUV/ST/ZN-BK 151-01661
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 3pcs.
Primerjava
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 3pcs.
RCD180SM6-PA66HIRHSUV/ST/ZN-BK 151-01673
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
3
Black (BK) RCD180SM6-PA66HIRHSUV/ST/ZN-BK 151-01673
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 160pcs.
Primerjava
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 160pcs.
RCD180SM8SS-PA666V0/SS304-BK 151-02734
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
160 pcs.
Black (BK) RCD180SM8SS-PA666V0/SS304-BK 151-02734
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 30°, black, 140pcs.
Primerjava
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 30°, black, 140pcs.
RCD30LM10-PA66HIRHSUV/ST/ZN-BK 151-01516
Primerjava
Ne pozabite
140 pcs.
Black (BK) RCD30LM10-PA66HIRHSUV/ST/ZN-BK 151-01516
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 30°, black, 140pcs.
Primerjava
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 30°, black, 140pcs.
RCD30LM12-PA66HIRHSUV/ST/ZN-BK 151-01517
Primerjava
Ne pozabite
140 pcs.
Black (BK) RCD30LM12-PA66HIRHSUV/ST/ZN-BK 151-01517
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 30°, black, 140pcs.
Primerjava
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 30°, black, 140pcs.
RCD30LM6-PA66HIRHSUV/ST/ZN-BK 151-01666
Primerjava
Ne pozabite
140 pcs.
Black (BK) RCD30LM6-PA66HIRHSUV/ST/ZN-BK 151-01666
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 30°, black, 140pcs.
Primerjava
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 30°, black, 140pcs.
RCD30LM8-PA66HIRHSUV/ST/ZN-BK 151-01515
Primerjava
Ne pozabite
140 pcs.
Black (BK) RCD30LM8-PA66HIRHSUV/ST/ZN-BK 151-01515
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 30°, black, 160pcs.
Primerjava
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 30°, black, 160pcs.
RCD30SM10-PA66HIRHSUV/ST/ZN-BK 151-01513
Primerjava
Ne pozabite
160 pcs.
Black (BK) RCD30SM10-PA66HIRHSUV/ST/ZN-BK 151-01513
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 30°, black, 160pcs.
Primerjava
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 30°, black, 160pcs.
RCD30SM12-PA66HIRHSUV/ST/ZN-BK 151-01514
Primerjava
Ne pozabite
160 pcs.
Black (BK) RCD30SM12-PA66HIRHSUV/ST/ZN-BK 151-01514
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 30°, black, 160pcs.
Primerjava
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 30°, black, 160pcs.
RCD30SM6-PA66HIRHSUV/ST/ZN-BK 151-01665
Primerjava
Ne pozabite
160 pcs.
Black (BK) RCD30SM6-PA66HIRHSUV/ST/ZN-BK 151-01665
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 30°, black, 160pcs.
Primerjava
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 30°, black, 160pcs.
RCD30SM8-PA66HIRHSUV/ST/ZN-BK 151-01512
Primerjava
Ne pozabite
160 pcs.
Black (BK) RCD30SM8-PA66HIRHSUV/ST/ZN-BK 151-01512
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 90°, black, 140pcs.
Primerjava
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 90°, black, 140pcs.
RCD90LM10-PA66HIRHSUV/ST/ZN-BK 151-01522
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
140 pcs.
Black (BK) RCD90LM10-PA66HIRHSUV/ST/ZN-BK 151-01522
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 90°, black, 140pcs.
Primerjava
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 90°, black, 140pcs.
RCD90LM12-PA66HIRHSUV/ST/ZN-BK 151-01523
Primerjava
Ne pozabite
140 pcs.
Black (BK) RCD90LM12-PA66HIRHSUV/ST/ZN-BK 151-01523
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 90°, black, 140pcs.
Primerjava
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 90°, black, 140pcs.
RCD90LM6-PA66HIRHSUV/ST/ZN-BK 151-01628
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
140 pcs.
Black (BK) RCD90LM6-PA66HIRHSUV/ST/ZN-BK 151-01628
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 90°, black, 140pcs.
Primerjava
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 90°, black, 140pcs.
RCD90LM8-PA66HIRHSUV/ST/ZN-BK 151-01521
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
140 pcs.
Black (BK) RCD90LM8-PA66HIRHSUV/ST/ZN-BK 151-01521
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 90°, black, 140pcs.
Primerjava
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 90°, black, 140pcs.
RCD90LM8SS-PA666V0/SS304-BK 151-03144
Primerjava
Ne pozabite
140
Black (BK) RCD90LM8SS-PA666V0/SS304-BK 151-03144
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 90°, black, 160pcs.
Primerjava
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 90°, black, 160pcs.
RCD90SM10-PA66HIRHSUV/ST/ZN-BK 151-01519
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
160 pcs.
Black (BK) RCD90SM10-PA66HIRHSUV/ST/ZN-BK 151-01519
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 90°, black, 160pcs.
Primerjava
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 90°, black, 160pcs.
RCD90SM12-PA66HIRHSUV/ST/ZN-BK 151-01520
Primerjava
Ne pozabite
160 pcs.
Black (BK) RCD90SM12-PA66HIRHSUV/ST/ZN-BK 151-01520
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 90°, black, 160pcs.
Primerjava
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 90°, black, 160pcs.
RCD90SM6-PA66HIRHSUV/ST/ZN-BK 151-01667
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
160 pcs.
Black (BK) RCD90SM6-PA66HIRHSUV/ST/ZN-BK 151-01667
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 90°, black, 160pcs.
Primerjava
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 90°, black, 160pcs.
RCD90SM8-PA66HIRHSUV/ST/ZN-BK 151-01518
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
160 pcs.
Black (BK) RCD90SM8-PA66HIRHSUV/ST/ZN-BK 151-01518
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 90°, black, 160pcs.
Primerjava
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 90°, black, 160pcs.
RCD90SM8SS-PA666V0/SS304-BK 151-03011
Primerjava
Ne pozabite
160
Black (BK) RCD90SM8SS-PA666V0/SS304-BK 151-03011
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Primerjava
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, natural, 1000pcs.
H7P-PA66-NA 211-60079
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
1000 pcs.
Natural (NA) H7P-PA66-NA 211-60079
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 760.0x7.6mm, ⌀5.0-225mm, natural, 50pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 760.0x7.6mm, ⌀5.0-225mm, natural, 50pcs.
T120L-PA66-NA 111-12429
Primerjava
Ne pozabite
50 pcs.
Natural (NA) T120L-PA66-NA 111-12429
Cable tie inside serrated, 460x7.6mm, ⌀15.0-125mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 460x7.6mm, ⌀15.0-125mm, natural, 100pcs.
T120M-PA66-NA 111-12619
Primerjava
Ne pozabite
100 pcs.
Natural (NA) T120M-PA66-NA 111-12619
Cable tie inside serrated, 820.0x8.9mm, ⌀8.0-245.0mm, black, 25pcs.
Heavy duty T-Series cable ties feature inside serrations to provide a positive hold on wire and cable bundles.
Primerjava
Cable tie inside serrated, 820.0x8.9mm, ⌀8.0-245.0mm, black, 25pcs.
T150L-PA66W-BK 111-15460
Primerjava
Ne pozabite
25 pcs.
Black (BK) T150L-PA66W-BK 111-15460
Cable tie inside serrated, 530.0x8.9mm, ⌀8.0-150.0mm, black, 25pcs.
Heavy duty T-Series cable ties feature inside serrations to provide a positive hold on wire and cable bundles.
Primerjava
Cable tie inside serrated, 530.0x8.9mm, ⌀8.0-150.0mm, black, 25pcs.
T150M-PA66W-BK 111-15660
Primerjava
Ne pozabite
25 pcs.
Black (BK) T150M-PA66W-BK 111-15660
Cable tie inside serrated, 145.0x2.5mm, ⌀1.5-35.0mm, natural, 1000pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 145.0x2.5mm, ⌀1.5-35.0mm, natural, 1000pcs.
T18I-PA66HS-NA 111-02359
Primerjava
Ne pozabite
1000 pcs.
Natural (NA) T18I-PA66HS-NA 111-02359
Cable tie inside serrated, 145.0x2.5mm, ⌀1.5-35mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 145.0x2.5mm, ⌀1.5-35mm, black, 100pcs.
T18I-PA66HS-BK 111-02358
Primerjava
Ne pozabite
100 pcs.
Black (BK) T18I-PA66HS-BK 111-02358
Cable tie inside serrated, 290x3.5mm, ⌀1.5-80.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 290x3.5mm, ⌀1.5-80.0mm, black, 100pcs.
T30LL-PA66W-BK 111-03570
Primerjava
Ne pozabite
100 pcs.
Black (BK) T30LL-PA66W-BK 111-03570
Stainless steel cable tie, ball bearing lock, 685.0x4.6mm, ⌀17.0-203.0mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Primerjava
Stainless steel cable tie, ball bearing lock, 685.0x4.6mm, ⌀17.0-203.0mm, metal, 100pcs.
MBT27SS-SS304-ML 111-93278
Primerjava
Ne pozabite
100 pcs.
Metal (ML) MBT27SS-SS304-ML 111-93278
Cable marker, to identify: wire and cable/for sliding, hotfoil print "0", ⌀1.8-6.3mm, black, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, hotfoil print "0", ⌀1.8-6.3mm, black, reel=1000pcs.
HODS85 0-PVC-BK 531-07728
Primerjava
Ne pozabite
1000 pcs.
Black (BK) HODS85 0-PVC-BK 531-07728
Cable marker, to identify: wire and cable/for sliding, hotfoil print "1", ⌀1.8-6.3mm, brown, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, hotfoil print "1", ⌀1.8-6.3mm, brown, reel=1000pcs.
HODS85 1-PVC-BN 531-07729
Primerjava
Ne pozabite
1000 pcs.
Brown (BN) HODS85 1-PVC-BN 531-07729
Cable marker, to identify: wire and cable/for sliding, hotfoil print "2", ⌀1.8-6.3mm, red, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, hotfoil print "2", ⌀1.8-6.3mm, red, reel=1000pcs.
HODS85 2-PVC-RD 531-07730
Primerjava
Ne pozabite
1000 pcs.
Red (RD) HODS85 2-PVC-RD 531-07730
Cable marker, to identify: wire and cable/for sliding, hotfoil print "3", ⌀1.8-6.3mm, orange, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, hotfoil print "3", ⌀1.8-6.3mm, orange, reel=1000pcs.
HODS85 3-PVC-OG 531-07731
Primerjava
Ne pozabite
1000 pcs.
Orange (OG) HODS85 3-PVC-OG 531-07731
Cable marker, to identify: wire and cable/for sliding, laser print "4", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "4", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 4-PVC-YE 531-07732
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 4-PVC-YE 531-07732
Cable marker, to identify: wire and cable/for sliding, hotfoil print "5", ⌀1.8-6.3mm, green, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, hotfoil print "5", ⌀1.8-6.3mm, green, reel=1000pcs.
HODS85 5-PVC-GN 531-07733
Primerjava
Ne pozabite
1000 pcs.
Green (GN) HODS85 5-PVC-GN 531-07733
Cable marker, to identify: wire and cable/for sliding, hotfoil print "6", ⌀1.8-6.3mm, blue, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, hotfoil print "6", ⌀1.8-6.3mm, blue, reel=1000pcs.
HODS85 6-PVC-BU 531-07734
Primerjava
Ne pozabite
1000 pcs.
Blue (BU) HODS85 6-PVC-BU 531-07734
Cable marker, to identify: wire and cable/for sliding, hotfoil print "7", ⌀1.8-6.3mm, violet, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, hotfoil print "7", ⌀1.8-6.3mm, violet, reel=1000pcs.
HODS85 7-PVC-VT 531-07735
Primerjava
Ne pozabite
1000 pcs.
Violet (VT) HODS85 7-PVC-VT 531-07735
Cable marker, to identify: wire and cable/for sliding, hotfoil print "8", ⌀1.8-6.3mm, grey, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, hotfoil print "8", ⌀1.8-6.3mm, grey, reel=1000pcs.
HODS85 8-PVC-GY 531-07736
Primerjava
Ne pozabite
1000 pcs.
Grey (GY) HODS85 8-PVC-GY 531-07736
Cable marker, to identify: wire and cable/for sliding, laser print "9", ⌀1.8-6.3mm, white, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "9", ⌀1.8-6.3mm, white, reel=1000pcs.
HODS85 9-PVC-WH 531-07737
Primerjava
Ne pozabite
1000 pcs.
White (WH) HODS85 9-PVC-WH 531-07737
Cable marker, to identify: wire and cable/for sliding, laser print "0", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "0", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 0-PVC-YE 531-07925
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 0-PVC-YE 531-07925
Cable marker, to identify: wire and cable/for sliding, laser print "1", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "1", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 1-PVC-YE 531-07926
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 1-PVC-YE 531-07926
Cable marker, to identify: wire and cable/for sliding, laser print "2", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "2", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 2-PVC-YE 531-07927
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 2-PVC-YE 531-07927
Cable marker, to identify: wire and cable/for sliding, laser print "3", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "3", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 3-PVC-YE 531-07928
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 3-PVC-YE 531-07928
Cable marker, to identify: wire and cable/for sliding, laser print "5", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "5", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 5-PVC-YE 531-07930
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 5-PVC-YE 531-07930
Cable marker, to identify: wire and cable/for sliding, laser print "6", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "6", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 6-PVC-YE 531-07931
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 6-PVC-YE 531-07931
Cable marker, to identify: wire and cable/for sliding, laser print "7", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "7", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 7-PVC-YE 531-07932
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 7-PVC-YE 531-07932
Cable marker, to identify: wire and cable/for sliding, laser print "8", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "8", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 8-PVC-YE 531-07933
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 8-PVC-YE 531-07933
Cable marker, to identify: wire and cable/for sliding, laser print "9", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "9", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 9-PVC-YE 531-07934
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 9-PVC-YE 531-07934
Cable marker, to identify: wire and cable/for sliding, laser print "A", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "A", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 A-PVC-YE 531-07935
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 A-PVC-YE 531-07935
Cable marker, to identify: wire and cable/for sliding, laser print "B", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "B", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 B-PVC-YE 531-07936
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 B-PVC-YE 531-07936
Cable marker, to identify: wire and cable/for sliding, laser print "C", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "C", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 C-PVC-YE 531-07937
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 C-PVC-YE 531-07937
Cable marker, to identify: wire and cable/for sliding, laser print "D", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "D", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 D-PVC-YE 531-07938
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 D-PVC-YE 531-07938
Cable marker, to identify: wire and cable/for sliding, laser print "E", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "E", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 E-PVC-YE 531-07939
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 E-PVC-YE 531-07939
Cable marker, to identify: wire and cable/for sliding, laser print "F", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "F", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 F-PVC-YE 531-07940
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 F-PVC-YE 531-07940
Cable marker, to identify: wire and cable/for sliding, laser print "G", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "G", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 G-PVC-YE 531-07941
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 G-PVC-YE 531-07941
Cable marker, to identify: wire and cable/for sliding, laser print "H", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "H", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 H-PVC-YE 531-07942
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 H-PVC-YE 531-07942
Cable marker, to identify: wire and cable/for sliding, laser print "I", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "I", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 I-PVC-YE 531-07943
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 I-PVC-YE 531-07943
Cable marker, to identify: wire and cable/for sliding, laser print "J", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "J", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 J-PVC-YE 531-07944
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 J-PVC-YE 531-07944
Cable marker, to identify: wire and cable/for sliding, laser print "K", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "K", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 K-PVC-YE 531-07945
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 K-PVC-YE 531-07945
Cable marker, to identify: wire and cable/for sliding, laser print "L", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "L", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 L-PVC-YE 531-07946
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 L-PVC-YE 531-07946
Cable marker, to identify: wire and cable/for sliding, laser print "M", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "M", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 M-PVC-YE 531-07947
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 M-PVC-YE 531-07947
Cable marker, to identify: wire and cable/for sliding, laser print "N", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "N", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 N-PVC-YE 531-07948
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 N-PVC-YE 531-07948
Cable marker, to identify: wire and cable/for sliding, laser print "O", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "O", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 O-PVC-YE 531-07949
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 O-PVC-YE 531-07949
Cable marker, to identify: wire and cable/for sliding, laser print "P", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "P", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 P-PVC-YE 531-07950
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 P-PVC-YE 531-07950
Cable marker, to identify: wire and cable/for sliding, laser print "Q", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "Q", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 Q-PVC-YE 531-07951
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 Q-PVC-YE 531-07951
Cable marker, to identify: wire and cable/for sliding, laser print "R", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "R", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 R-PVC-YE 531-07952
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 R-PVC-YE 531-07952
Cable marker, to identify: wire and cable/for sliding, laser print "S", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "S", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 S-PVC-YE 531-07953
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 S-PVC-YE 531-07953
Cable marker, to identify: wire and cable/for sliding, laser print "T", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "T", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 T-PVC-YE 531-07954
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 T-PVC-YE 531-07954
Cable marker, to identify: wire and cable/for sliding, laser print "U", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "U", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 U-PVC-YE 531-07955
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 U-PVC-YE 531-07955
Cable marker, to identify: wire and cable/for sliding, laser print "V", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "V", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 V-PVC-YE 531-07956
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 V-PVC-YE 531-07956
Cable marker, to identify: wire and cable/for sliding, laser print "W", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "W", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 W-PVC-YE 531-07957
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 W-PVC-YE 531-07957
Cable marker, to identify: wire and cable/for sliding, laser print "X", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "X", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 X-PVC-YE 531-07958
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 X-PVC-YE 531-07958
Cable marker, to identify: wire and cable/for sliding, laser print "Y", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "Y", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 Y-PVC-YE 531-07959
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 Y-PVC-YE 531-07959
Cable marker, to identify: wire and cable/for sliding, laser print "Z", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "Z", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 Z-PVC-YE 531-07960
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 Z-PVC-YE 531-07960
Cable marker, to identify: wire and cable/for sliding, laser print "⏚", ⌀1.8-6.3mm, yellow, reel=1000pcs.
Primerjava
Cable marker, to identify: wire and cable/for sliding, laser print "⏚", ⌀1.8-6.3mm, yellow, reel=1000pcs.
HODS85 Earth-PVC-YE 531-00386
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) HODS85 Earth-PVC-YE 531-00386
Releasable cable tie, 200x4.7mm, ⌀16.0-50.0mm, 135N, black, 100pcs.
REZ series cable tie with ergonomic release mechanism.
Primerjava
Releasable cable tie, 200x4.7mm, ⌀16.0-50.0mm, 135N, black, 100pcs.
REZ200-PA66-BK 115-40200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) REZ200-PA66-BK 115-40200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Releasable cable tie, 305x4.7mm, ⌀16.0-80.0mm, 135N, black, 100pcs.
REZ series cable tie with ergonomic release mechanism.
Primerjava
Releasable cable tie, 305x4.7mm, ⌀16.0-80.0mm, 135N, black, 100pcs.
REZ300-PA66-BK 115-40300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) REZ300-PA66-BK 115-40300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie outside serrated, 100.0x2.5mm, ⌀1.6-20.0mm, black, 500pcs.
Outside serrations minimize damage to cables, while still providing high tensile strength and low insertion force.
Primerjava
Cable tie outside serrated, 100.0x2.5mm, ⌀1.6-20.0mm, black, 500pcs.
T18ROS-PA66HS-BK 118-04701
Primerjava
Ne pozabite
500 pcs.
Black (BK) T18ROS-PA66HS-BK 118-04701
Cable tie outside serrated, 200.0x4.6mm, ⌀1.6-50.0mm, black, 500pcs.
Outside serrated OS-Series cable tie with smooth surface to the bundle.
Primerjava
Cable tie outside serrated, 200.0x4.6mm, ⌀1.6-50.0mm, black, 500pcs.
T50ROS-PA66HS-BK 118-05040
Primerjava
Ne pozabite
500 pcs.
Black (BK) T50ROS-PA66HS-BK 118-05040
Cable tie outside serrated, 150.0x4.6mm, ⌀1.6-35.0mm, black, 100pcs.
Outside serrations minimize damage to cables, while still providing high tensile strength and low insertion force.
Primerjava
Cable tie outside serrated, 150.0x4.6mm, ⌀1.6-35.0mm, black, 100pcs.
T50SOS-PA66HS-BK 118-05850
Primerjava
Ne pozabite
100 pcs.
Black (BK) T50SOS-PA66HS-BK 118-05850
Fixing tie for stud, inside serrated, ⌀9.0-40.0mm, black, 100pcs.
Flexible head wraps around cable bundle for easy installation.
Primerjava
Fixing tie for stud, inside serrated, ⌀9.0-40.0mm, black, 100pcs.
T50RS5-PA66-BK 111-07110
Primerjava
Ne pozabite
100 pcs.
Black (BK) T50RS5-PA66-BK 111-07110
Fixing tie for screw fixation, inside serrated, ⌀1.5-32.0mm, natural, 100pcs.
One-piece Screw Mount Cable Ties fasten with a screw or bolt to provide secure routing of cable bundles. 
Primerjava
Fixing tie for screw fixation, inside serrated, ⌀1.5-32.0mm, natural, 100pcs.
T30MR-PA66-NA 113-03019
Primerjava
Ne pozabite
100 pcs.
Natural (NA) T30MR-PA66-NA 113-03019
Fixing tie for screw fixation, inside serrated, ⌀1.5-45.0mm, natural, 100pcs.
Screw mount style creates low insertion and high extraction force.
Primerjava
Fixing tie for screw fixation, inside serrated, ⌀1.5-45.0mm, natural, 100pcs.
T50MR-PA66-NA 113-05019
Primerjava
Ne pozabite
100 pcs.
Natural (NA) T50MR-PA66-NA 113-05019
Fixing tie for hole (round), outside serrated, ⌀1.5-30.0mm, black, 500pcs.
1-Piece Fixing Tie for round holes with disc.
Primerjava
Fixing tie for hole (round), outside serrated, ⌀1.5-30.0mm, black, 500pcs.
T50SOSSFT6.5E-PA66HS-BK 126-03102
Primerjava
Ne pozabite
500 pcs.
Black (BK) T50SOSSFT6.5E-PA66HS-BK 126-03102
Fixing tie for hole (round), inside serrated, ⌀1.5-31.0mm, black, 1000pcs.
The flexible 'discs' adjusts to take up variations in panel thickness - ensuring a firm fixing at all times.
Primerjava
Fixing tie for hole (round), inside serrated, ⌀1.5-31.0mm, black, 1000pcs.
T50SST5-PA66HS-BK 126-00017
Primerjava
Ne pozabite
1000 pcs.
Black (BK) T50SST5-PA66HS-BK 126-00017
Fixing tie for hole (round), inside serrated, ⌀1.5-45.0mm, natural, 100pcs.
Fixing tie with Arrowhead for round hole.
Primerjava
Fixing tie for hole (round), inside serrated, ⌀1.5-45.0mm, natural, 100pcs.
T50RSFM-PA66-NA 111-85729
Primerjava
Ne pozabite
100 pcs.
Natural (NA) T50RSFM-PA66-NA 111-85729
Fixing tie for hole (round), inside serrated, ⌀1.5-27.0mm, natural, 1000pcs.
Fixing tie for round holes with arrowhead and audibly clicks into place when applied.
Primerjava
Fixing tie for hole (round), inside serrated, ⌀1.5-27.0mm, natural, 1000pcs.
T50SSL5-PA66-NA 111-85339
Primerjava
Ne pozabite
1000 pcs.
Natural (NA) T50SSL5-PA66-NA 111-85339
Fixing tie for stud, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
Cable ties with various weld stud fixing methods.
Primerjava
Fixing tie for stud, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
T50ROSSBH5SD-PA66HS-BK 156-05905
Primerjava
Ne pozabite
500 pcs.
Black (BK) T50ROSSBH5SD-PA66HS-BK 156-05905
Facebook  Instagram  X  YouTube  LinkedIn  Link Corporate Blog 
Kontakt Pogoji Podatki o podjetju Navodila in zaveze Izjava o zasebnosti Zemljevid spletnega mesta Novice
Update: 21/12/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.293.4) | Update: 21/12/2025 | Nastavitve zasebnosti
Iskanje prodajalca Kontakt