Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
02/11/2025

Rezultatov iskanja za "wind energy sector"

2.878 najdeni proizvodi 2 further hits
Rezultati iskanja v kategorijah:
Cable Ties and Fixings

Cable Ties and Fixings  (1022)

Cable Ties Inside Serrated  (299) Cable Ties Outside Serrated  (34) Cable Ties Without Serration  (26) Cable Ties, Releasable  (49) Cable Ties, Stainless Steel  (75) Cable Ties With Fixing Elements  (123) Cable Tie Mounts  (120) Fixing Elements  (37) Clips, Clamps and Plugs  (283)
Cable Ties and Fixings
Cable Ties and Fixings (1022)
Insulation

Insulation  (325)

Heat Shrink Tubing  (321) Heat Shrinkable Moulded Shapes  (5)
Insulation
Insulation (325)
Cable Protection Systems

Cable Protection Systems  (180)

Non-Metallic Conduit Systems  (7) Metallic Conduit Systems  (75) Conduit System Accessories  (12) Protective Tubing and Spiral Binding  (76) Expandable Braided Sleeves  (2) Open Woven Sleeves  (8) Edge Protection  (1) Wiring Ducts and Accessories  (2)
Cable Protection Systems
Cable Protection Systems (180)
Electrical Installation

Electrical Installation  (271)

Electrical Tapes  (91) Cast Resin Technology  (82) Gel Technology  (2) Cable Entry Systems  (96)
Electrical Installation
Electrical Installation (271)
Identification Systems

Identification Systems  (1025)

Wire and Cable Markers  (735) Control Panel Labelling  (128) Industrial Identification  (227) RFID tags and cable ties  (56) Security Labeling  (13) Hazardous Area Identification  (10) Printers and Software  (23)
Identification Systems
Identification Systems (1025)
Application Tooling

Application Tooling  (55)

Automatic Cable Tying System  (24) Application Tooling for Cable Ties  (22) Application Tooling for Snappers  (2) Application Tooling for Heat Shrinkable Tubing  (4) Application Tooling for Non Shrinkable Tubing  (2) Application Tooling for Braided Sleeves  (1)
Application Tooling
Application Tooling (55)
2.878 najdeni proizvodi
Ponastavi vse
Cast resin joint, Parallel P, 4 x 35mm² to 4 x 150mm², L=300mm, 1950 ml, Polyurethane resin (PUR) black
Parallel branch joint PAH-2 PUR771.
Primerjava
Cast resin joint, Parallel P, 4 x 35mm² to 4 x 150mm², L=300mm, 1950 ml, Polyurethane resin (PUR) black
PAH-2 / SF-PUR-BK 435-00183
Primerjava
Ne pozabite
1 Set
Black (BK) PAH-2 / SF-PUR-BK 435-00183
Cast resin joint, Parallel P, 4 x 35mm² to 4 x 185mm², L=360mm, 2800 ml, Polyurethane resin (PUR) black
Parallel branch joint PAH-3 PUR771.
Primerjava
Cast resin joint, Parallel P, 4 x 35mm² to 4 x 185mm², L=360mm, 2800 ml, Polyurethane resin (PUR) black
PAH-3 / SF-PUR-BK 435-00184
Primerjava
Ne pozabite
1 Set
Black (BK) PAH-3 / SF-PUR-BK 435-00184
Cast resin joint, Parallel P, 4 x 70mm² to 4 x 240mm², L=420mm, 3900 ml, Polyurethane resin (PUR) black
Parallel branch joint PAH-4 PUR771.
Primerjava
Cast resin joint, Parallel P, 4 x 70mm² to 4 x 240mm², L=420mm, 3900 ml, Polyurethane resin (PUR) black
PAH-4 / SF-PUR-BK 435-00185
Primerjava
Ne pozabite
1 Set
Black (BK) PAH-4 / SF-PUR-BK 435-00185
Gel, Silicone (SI) green/transparent, 10000ml
Two-component silicone gel Religel.
Primerjava
Gel, Silicone (SI) green/transparent, 10000ml
Religel Plus 10.000-SI-CL/GN 435-00753
Primerjava
Ne pozabite
10000 ml
Green (GN), Transparent (CL) Religel Plus 10.000-SI-CL/GN 435-00753
Cable tag, manual marking, 62.5x4.70mm, natural, bag=100pcs.
Primerjava
Cable tag, manual marking, 62.5x4.70mm, natural, bag=100pcs.
AT1-PA66-NA 151-41119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) AT1-PA66-NA 151-41119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie outside serrated, 385x7.6mm, ⌀5.0-105mm, black, 100pcs.
T18ROS outside serrated Cable Tie.
Primerjava
Cable tie outside serrated, 385x7.6mm, ⌀5.0-105mm, black, 100pcs.
T120ROS-PA66HIRHS(REC)-BK 118-00174
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Primerjava
Ne pozabite
100 pcs.
Black (BK) T120ROS-PA66HIRHS(REC)-BK 118-00174
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Cable tie outside serrated, 245x4.6mm, ⌀1.6-66.0mm, black, 100pcs.
T18ROS outside serrated Cable Tie.
Primerjava
Cable tie outside serrated, 245x4.6mm, ⌀1.6-66.0mm, black, 100pcs.
T50MOS-PA66HIRHS(REC)-BK 118-00173
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Primerjava
Ne pozabite
100 pcs.
Black (BK) T50MOS-PA66HIRHS(REC)-BK 118-00173
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Ratchet O-Clamp
Primerjava
Ratchet O-Clamp
SGROC15.5-20FTOVAL-PA66HIRHSUV/TPE-BK 151-04076
Primerjava
Ne pozabite
1000 pcs.
Black (BK) SGROC15.5-20FTOVAL-PA66HIRHSUV/TPE-BK 151-04076
Fitting for metallic conduits, nom⌀10mm, metal, 10pcs.
HelaGuard LTS-EI End Insert.
Primerjava
Fitting for metallic conduits, nom⌀10mm, metal, 10pcs.
LTS10-EI-NPB-ML 166-32700
Primerjava
Ne pozabite
10 pcs.
Metal (ML) LTS10-EI-NPB-ML 166-32700
Fitting for metallic conduits, nom⌀12mm, metal, 10pcs.
HelaGuard LTS-EI End Insert.
Primerjava
Fitting for metallic conduits, nom⌀12mm, metal, 10pcs.
LTS12-EI-NPB-ML 166-32701
Primerjava
Ne pozabite
10 pcs.
Metal (ML) LTS12-EI-NPB-ML 166-32701
Fitting for metallic conduits, nom⌀16mm, metal, 10pcs.
HelaGuard LTS-EI End Insert.
Primerjava
Fitting for metallic conduits, nom⌀16mm, metal, 10pcs.
LTS16-EI-NPB-ML 166-32702
Primerjava
Ne pozabite
10 pcs.
Metal (ML) LTS16-EI-NPB-ML 166-32702
Fitting for metallic conduits, nom⌀20mm, metal, 10pcs.
HelaGuard LTS-EI End Insert.
Primerjava
Fitting for metallic conduits, nom⌀20mm, metal, 10pcs.
LTS20-EI-NPB-ML 166-32703
Primerjava
Ne pozabite
10 pcs.
Metal (ML) LTS20-EI-NPB-ML 166-32703
Fitting for metallic conduits, nom⌀25mm, metal, 10pcs.
HelaGuard LTS-EI End Insert.
Primerjava
Fitting for metallic conduits, nom⌀25mm, metal, 10pcs.
LTS25-EI-NPB-ML 166-32704
Primerjava
Ne pozabite
10 pcs.
Metal (ML) LTS25-EI-NPB-ML 166-32704
Fitting for metallic conduits, nom⌀32mm, metal, 2pcs.
HelaGuard LTS-EI End Insert.
Primerjava
Fitting for metallic conduits, nom⌀32mm, metal, 2pcs.
LTS32-EI-NPB-ML 166-32705
Primerjava
Ne pozabite
2 pcs.
Metal (ML) LTS32-EI-NPB-ML 166-32705
Fitting for metallic conduits, nom⌀40mm, metal, 1pc.
HelaGuard LTS-EI End Insert.
Primerjava
Fitting for metallic conduits, nom⌀40mm, metal, 1pc.
LTS40-EI-NPB-ML 166-32706
Primerjava
Ne pozabite
1 pcs.
Metal (ML) LTS40-EI-NPB-ML 166-32706
Fitting for metallic conduits, nom⌀50mm, metal, 1pc.
HelaGuard LTS-EI End Insert.
Primerjava
Fitting for metallic conduits, nom⌀50mm, metal, 1pc.
LTS50-EI-NPB-ML 166-32707
Primerjava
Ne pozabite
1 pcs.
Metal (ML) LTS50-EI-NPB-ML 166-32707
Cable tie mount for adhesive use, ⌀3.1 mm, black, 100pcs.
FKH80 are designed to retain flat ribbon cables.
Primerjava
Cable tie mount for adhesive use, ⌀3.1 mm, black, 100pcs.
FKH80APT-I-PA66HIR-BK 151-01563
Primerjava
Ne pozabite
100 pcs.
Black (BK) FKH80APT-I-PA66HIR-BK 151-01563
Cable tie mount for adhesive use, Wmax=5.1mm, ⌀4.1 mm, natural, 100pcs.
Mounting bases Q-Mount.
Primerjava
Cable tie mount for adhesive use, Wmax=5.1mm, ⌀4.1 mm, natural, 100pcs.
QM30APT-I-PA66-NA 151-01593
Primerjava
Ne pozabite
100 pcs.
Natural (NA) QM30APT-I-PA66-NA 151-01593
Cable tie mount for adhesive use, Wmax=8.4mm, ⌀4.1 mm, natural, 50pcs.
Mounting bases Q-Mount.
Primerjava
Cable tie mount for adhesive use, Wmax=8.4mm, ⌀4.1 mm, natural, 50pcs.
QM40APT-I-PA66-NA 151-01595
Primerjava
Ne pozabite
50 pcs.
Natural (NA) QM40APT-I-PA66-NA 151-01595
Cable tie mount for adhesive use, Wmax=8.4mm, ⌀4.1 mm, black, 50pcs.
Mounting bases Q-Mount.
Primerjava
Cable tie mount for adhesive use, Wmax=8.4mm, ⌀4.1 mm, black, 50pcs.
QM40APT-I-PA66-BK 151-01596
Primerjava
Ne pozabite
50 pcs.
Black (BK) QM40APT-I-PA66-BK 151-01596
Cable tie mount for adhesive use, Wmax=4.0mm, ⌀3.1 mm, white, 100pcs.
Mounting bases Q-Mount.
Primerjava
Cable tie mount for adhesive use, Wmax=4.0mm, ⌀3.1 mm, white, 100pcs.
QM20APT-A-PA66-WH 151-02971
Primerjava
Ne pozabite
100 pcs.
White (WH) QM20APT-A-PA66-WH 151-02971
Cable tie mount for adhesive use, Wmax=5.1mm, ⌀4.1 mm, white, 100pcs.
Mounting bases Q-Mount.
Primerjava
Cable tie mount for adhesive use, Wmax=5.1mm, ⌀4.1 mm, white, 100pcs.
QM30APT-A-PA66-WH 151-02973
Primerjava
Ne pozabite
100 pcs.
White (WH) QM30APT-A-PA66-WH 151-02973
Cable tie mount for adhesive use, Wmax=8.4mm, ⌀4.1 mm, white, 50pcs.
Mounting bases Q-Mount.
Primerjava
Cable tie mount for adhesive use, Wmax=8.4mm, ⌀4.1 mm, white, 50pcs.
QM40APT-A-PA66-WH 151-02975
Primerjava
Ne pozabite
50 pcs.
White (WH) QM40APT-A-PA66-WH 151-02975
Cable tie mount for adhesive use, Wmax=8.4mm, ⌀4.1 mm, black, 50pcs.
Mounting bases Q-Mount.
Primerjava
Cable tie mount for adhesive use, Wmax=8.4mm, ⌀4.1 mm, black, 50pcs.
QM40APT-A-PA66-BK 151-02976
Primerjava
Ne pozabite
50 pcs.
Black (BK) QM40APT-A-PA66-BK 151-02976
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Primerjava
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
50 pcs.
Black (BK) ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
50 pcs.
Black (BK) ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Primerjava
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Primerjava
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Primerjava
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Primerjava
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Label, durable/UV resistant, silver, thermal transfer print, 7x13mm, 1000pcs.
Helatag 1221 Series, silver panel plate labels.
Primerjava
Label, durable/UV resistant, silver, thermal transfer print, 7x13mm, 1000pcs.
TAG13-07TDK1-1221-SR 596-00573
Primerjava
Ne pozabite
1000 reel
Silver (SR) TAG13-07TDK1-1221-SR 596-00573
Label, durable/UV resistant, silver, thermal transfer print, 22x22mm, 1000pcs.
Helatag 1221 Series, silver panel plate labels.
Primerjava
Label, durable/UV resistant, silver, thermal transfer print, 22x22mm, 1000pcs.
TAG22-22TDK1-1221-SR 596-00574
Primerjava
Ne pozabite
1000 reel
Silver (SR) TAG22-22TDK1-1221-SR 596-00574
Label, durable/UV resistant, silver, thermal transfer print, 8x27mm, 1000pcs.
Helatag 1221 Series, silver panel plate labels.
Primerjava
Label, durable/UV resistant, silver, thermal transfer print, 8x27mm, 1000pcs.
TAG27-08TDK1-1221-SR 596-00575
Primerjava
Ne pozabite
1000 reel
Silver (SR) TAG27-08TDK1-1221-SR 596-00575
Label, durable/UV resistant, silver, thermal transfer print, 15x27mm, 1000pcs.
Helatag 1221 Series, silver panel plate labels.
Primerjava
Label, durable/UV resistant, silver, thermal transfer print, 15x27mm, 1000pcs.
TAG27-15TDK1-1221-SR 596-00577
Primerjava
Ne pozabite
1000 reel
Silver (SR) TAG27-15TDK1-1221-SR 596-00577
Label, durable/UV resistant, silver, thermal transfer print, 27x27mm, 1000pcs.
Helatag 1221 Series, silver panel plate labels.
Primerjava
Label, durable/UV resistant, silver, thermal transfer print, 27x27mm, 1000pcs.
TAG27-27TDK1-1221-SR 596-00579
Primerjava
Ne pozabite
1000 reel
Silver (SR) TAG27-27TDK1-1221-SR 596-00579
Label, durable/UV resistant, silver, thermal transfer print, 18x35mm, 1000pcs.
Helatag 1221 Series, silver panel plate labels.
Primerjava
Label, durable/UV resistant, silver, thermal transfer print, 18x35mm, 1000pcs.
TAG35-18TDK1-1221-SR 596-00580
Primerjava
Ne pozabite
1000 reel
Silver (SR) TAG35-18TDK1-1221-SR 596-00580
Label, durable/UV resistant, silver, thermal transfer print, 15x45mm, 1000pcs.
Helatag 1221 Series, silver panel plate labels.
Primerjava
Label, durable/UV resistant, silver, thermal transfer print, 15x45mm, 1000pcs.
TAG45-15TDK1-1221-SR 596-00581
Primerjava
Ne pozabite
1000 reel
Silver (SR) TAG45-15TDK1-1221-SR 596-00581
Label, durable/UV resistant, silver, thermal transfer print, 25x45mm, 1000pcs.
Helatag 1221 Series, silver panel plate labels.
Primerjava
Label, durable/UV resistant, silver, thermal transfer print, 25x45mm, 1000pcs.
TAG45-25TDK1-1221-SR 596-00582
Primerjava
Ne pozabite
1000 reel
Silver (SR) TAG45-25TDK1-1221-SR 596-00582
Label, durable/UV resistant, silver, thermal transfer print, 45x90mm, 500pcs.
Helatag 1221 Series, silver panel plate labels.
Primerjava
Label, durable/UV resistant, silver, thermal transfer print, 45x90mm, 500pcs.
TAG90-45TDK1-1221-SR 596-00584
Primerjava
Ne pozabite
500 reel
Silver (SR) TAG90-45TDK1-1221-SR 596-00584
Label, durable/UV resistant, silver, thermal transfer print, 30x100mm, 250pcs.
Helatag 1221 Series, silver panel plate labels.
Primerjava
Label, durable/UV resistant, silver, thermal transfer print, 30x100mm, 250pcs.
TAG100-30TDK1-1221-SR 596-00585
Primerjava
Ne pozabite
250 reel
Silver (SR) TAG100-30TDK1-1221-SR 596-00585
Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.
Primerjava
Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.
SSPC4-SS316L-ML 151-00837
Primerjava
Ne pozabite
100 pcs.
Metal (ML) SSPC4-SS316L-ML 151-00837
Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.
Primerjava
Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.
SSPC6-SS316L-ML 151-00839
Primerjava
Ne pozabite
100 pcs.
Metal (ML) SSPC6-SS316L-ML 151-00839
RFID label, 860-960 MHz (UHF), white, 45.00x18.00mm, 5000pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Primerjava
RFID label, 860-960 MHz (UHF), white, 45.00x18.00mm, 5000pcs.
TAG45x18T1UHF-1601-WH 556-00839
Primerjava
Ne pozabite
5000 pcs.
White (WH) TAG45x18T1UHF-1601-WH 556-00839
RFID label, 860-960 MHz (UHF), white, 73.00x13.00mm, 5000pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Primerjava
RFID label, 860-960 MHz (UHF), white, 73.00x13.00mm, 5000pcs.
TAG73x13T1UHF-1601-WH 556-00840
Primerjava
Ne pozabite
5000 pcs.
White (WH) TAG73x13T1UHF-1601-WH 556-00840
RFID label, 860-960 MHz (UHF), white, 44.00x44.00mm, 2000pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Primerjava
RFID label, 860-960 MHz (UHF), white, 44.00x44.00mm, 2000pcs.
TAGS44T1UHF-1601-WH 556-00845
Primerjava
Ne pozabite
2000 pcs.
White (WH) TAGS44T1UHF-1601-WH 556-00845
RFID label, 860-960 MHz (UHF), white, 110.00x13.00mm, 800pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Primerjava
RFID label, 860-960 MHz (UHF), white, 110.00x13.00mm, 800pcs.
TAG110x13T1UHFM-1601-WH 556-00841
Primerjava
Ne pozabite
800 pcs.
White (WH) TAG110x13T1UHFM-1601-WH 556-00841
RFID label, 860-960 MHz (UHF), white, 54.00x24.00mm, 450pcs.
RFID HF labels for easy inventory and asset management.
Primerjava
RFID label, 860-960 MHz (UHF), white, 54.00x24.00mm, 450pcs.
TAG54x24T1UHFM-1601-WH 556-00844
Primerjava
Ne pozabite
450 pcs.
White (WH) TAG54x24T1UHFM-1601-WH 556-00844
RFID label, 860-960 MHz (UHF), white, 55.00x14.00mm, 800pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Primerjava
RFID label, 860-960 MHz (UHF), white, 55.00x14.00mm, 800pcs.
TAG55x14T1UHFM-1601-WH 556-00842
Primerjava
Ne pozabite
800 pcs.
White (WH) TAG55x14T1UHFM-1601-WH 556-00842
RFID label, 860-960 MHz (UHF), white, 250.00x33.00mm, 500pcs.
RFID bundling label TAG250x33T1UHF – temporary unique identification of cable and wire harnesses.
Primerjava
RFID label, 860-960 MHz (UHF), white, 250.00x33.00mm, 500pcs.
TAG250x33T1UHF-1603-WH 556-00846
Primerjava
Ne pozabite
500 pcs.
White (WH) TAG250x33T1UHF-1603-WH 556-00846
RFID label, 860-960 MHz (UHF), white, 130.00x50.00mm, 1000pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Primerjava
RFID label, 860-960 MHz (UHF), white, 130.00x50.00mm, 1000pcs.
TAG130x50T1UHF-1603-WH 556-00847
Primerjava
Ne pozabite
1000 pcs.
White (WH) TAG130x50T1UHF-1603-WH 556-00847
Marker pen, black, 2pcs.
T82 Marker Pen.
Primerjava
Marker pen, black, 2pcs.
T82S-BK-PL-BK 500-50820
Primerjava
Ne pozabite
2 pack
Black (BK) T82S-BK-PL-BK 500-50820
Cable tie inside serrated, 388.0x7.6mm, ⌀3.0-100mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 388.0x7.6mm, ⌀3.0-100mm, black, 100pcs.
T120R-PA66HIRHS-BK 111-02384
Primerjava
Ne pozabite
100 pcs.
Black (BK) T120R-PA66HIRHS-BK 111-02384
Cable tie inside serrated, 600x7.6mm, ⌀15.0-175mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 600x7.6mm, ⌀15.0-175mm, black, 100pcs.
T120XM-PA66W-BK 111-00171
Primerjava
Ne pozabite
100 pcs.
Black (BK) T120XM-PA66W-BK 111-00171
Cable tie inside serrated, 820x8.8mm, ⌀8.0-245mm, black, 50pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 820x8.8mm, ⌀8.0-245mm, black, 50pcs.
T150L-PA66HS-BK 111-01687
Primerjava
Ne pozabite
50 pcs.
Black (BK) T150L-PA66HS-BK 111-01687
Cable tie inside serrated, 820x8.8mm, ⌀8.0-245mm, black, 50pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 820x8.8mm, ⌀8.0-245mm, black, 50pcs.
T150L-PA66UV-BK 111-01689
Primerjava
Ne pozabite
50 pcs.
Black (BK) T150L-PA66UV-BK 111-01689
Cable clip for hole (round), ⌀4.7 mm, Dmin=11.0mm, Dmax=15.0mm
Primerjava
Cable clip for hole (round), ⌀4.7 mm, Dmin=11.0mm, Dmax=15.0mm
WPC15-PA66-NA 151-75159
Primerjava
Ne pozabite
500 pcs.
Natural (NA) WPC15-PA66-NA 151-75159
Cable clip for hole (round), ⌀4.7 mm, Dmin=11.0mm, Dmax=20.0mm
Primerjava
Cable clip for hole (round), ⌀4.7 mm, Dmin=11.0mm, Dmax=20.0mm
WPC20-PA66-NA 151-75209
Primerjava
Ne pozabite
500 pcs.
Natural (NA) WPC20-PA66-NA 151-75209
Cable clip for hole (round), ⌀4.7 mm, Dmin=5.0mm, Dmax=5.0mm
Primerjava
Cable clip for hole (round), ⌀4.7 mm, Dmin=5.0mm, Dmax=5.0mm
WPC5-PA66-NA 151-75059
Primerjava
Ne pozabite
100 pcs.
Natural (NA) WPC5-PA66-NA 151-75059
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
IAHC( )AH in combination with an IAHC( )T.
Primerjava
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
IAHC3CH-PA66HIRHS-BK 151-00381
Primerjava
Ne pozabite
450 pcs.
Black (BK) IAHC3CH-PA66HIRHS-BK 151-00381
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=27.0mm, Dmax=36.0mm
Primerjava
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=27.0mm, Dmax=36.0mm
IAHC4CH-PA6HIRHS-BK 151-00383
Primerjava
Ne pozabite
450 pcs.
Black (BK) IAHC4CH-PA6HIRHS-BK 151-00383
Corrugated tube clip for hole (round), nom⌀4.5mm, black, 500pcs.
The tubing is clicked into the CTC clamp and is held firmly.
Primerjava
Corrugated tube clip for hole (round), nom⌀4.5mm, black, 500pcs.
CTC4.5FT6LG-PA66HIRHS-BK 151-14314
Primerjava
Ne pozabite
500 pcs.
Black (BK) CTC4.5FT6LG-PA66HIRHS-BK 151-14314
Corrugated tube clip for hole (round), nom⌀10.0mm, black, 500pcs.
The tubing is clicked into the CTC clamp and is held firmly.
Primerjava
Corrugated tube clip for hole (round), nom⌀10.0mm, black, 500pcs.
CTC10FT6-PA66HIRHS-BK 151-14311
Primerjava
Ne pozabite
500 pcs.
Black (BK) CTC10FT6-PA66HIRHS-BK 151-14311
Corrugated tube clip for hole (round), nom⌀13.0mm, black, 500pcs.
The tubing is clicked into the CTC clamp and is held firmly.
Primerjava
Corrugated tube clip for hole (round), nom⌀13.0mm, black, 500pcs.
CTC13FT6LG-PA66HIRHS-BK 151-00019
Primerjava
Ne pozabite
500 pcs.
Black (BK) CTC13FT6LG-PA66HIRHS-BK 151-00019
Corrugated tube clip for hole (round), nom⌀10.0mm, black, 500pcs.
Clip includes an internal rib that spans the inside of the bracket to fit securely into the profile of the tubing to prevent lateral movement and slipping of the tubing.
Primerjava
Corrugated tube clip for hole (round), nom⌀10.0mm, black, 500pcs.
CTC10FT9-PA66HIRHS-BK 155-17801
Primerjava
Ne pozabite
500 pcs.
Black (BK) CTC10FT9-PA66HIRHS-BK 155-17801
Corrugated tube clip for hole (round), nom⌀13.0mm, black, 500pcs.
Clip includes an internal rib that spans the inside of the bracket to fit securely into the profile of the tubing to prevent lateral movement and slipping of the tubing.
Primerjava
Corrugated tube clip for hole (round), nom⌀13.0mm, black, 500pcs.
CTC13FT6-PA66HIRHS-BK 151-14312
Primerjava
Ne pozabite
500 pcs.
Black (BK) CTC13FT6-PA66HIRHS-BK 151-14312
Cable clip with pipe/tube holder, Dmin=35.0mm, Dmax=45.0mm
When cable is pushed inside, it automatically activates the locking features which causes it to close.
Primerjava
Cable clip with pipe/tube holder, Dmin=35.0mm, Dmax=45.0mm
IAHC5T-PA66HIRHS-BK 151-00195
Primerjava
Ne pozabite
700 pcs.
Black (BK) IAHC5T-PA66HIRHS-BK 151-00195
Corrugated tube clip for stud, nom⌀10.0mm, black, 500pcs.
Fixing element for convoluted tubes 10 mm with stud fixation 6 mm.
Primerjava
Corrugated tube clip for stud, nom⌀10.0mm, black, 500pcs.
CTC10SBS6-PA66HIRHS-BK 151-00702
Primerjava
Ne pozabite
500 pcs.
Black (BK) CTC10SBS6-PA66HIRHS-BK 151-00702
Cable clip for screw fixation, ⌀3.1 mm
FKH25 are designed to retain flat ribbon cables.
Primerjava
Cable clip for screw fixation, ⌀3.1 mm
FKH25-PA66HIR-BK 151-16250
Primerjava
Ne pozabite
100 pcs.
Black (BK) FKH25-PA66HIR-BK 151-16250
Cable clip for screw fixation, ⌀3.1 mm
FKH30 mounts are designed to retain flat ribbon cables.
Primerjava
Cable clip for screw fixation, ⌀3.1 mm
FKH30-PA66HIR-BK 151-16300
Primerjava
Ne pozabite
100 pcs.
Black (BK) FKH30-PA66HIR-BK 151-16300
Cable clip for screw fixation, ⌀3.1 mm
FKH50 are designed to retain flat ribbon cables.
Primerjava
Cable clip for screw fixation, ⌀3.1 mm
FKH50-PA66HIR-BK 151-16500
Primerjava
Ne pozabite
100 pcs.
Black (BK) FKH50-PA66HIR-BK 151-16500
Cable clip for screw fixation, ⌀3.1 mm
FKH80 are designed to retain flat ribbon cables.
Primerjava
Cable clip for screw fixation, ⌀3.1 mm
FKH80-PA66HIR-BK 151-16800
Primerjava
Ne pozabite
100 pcs.
Black (BK) FKH80-PA66HIR-BK 151-16800
Cable tie mount for hole (round), Wmax=9.3mm, ⌀5.9 - 6.4 mm, natural, 100pcs.
Cable tie mount for round holes with special designed two wedge footpart for high pull out forces.
Primerjava
Cable tie mount for hole (round), Wmax=9.3mm, ⌀5.9 - 6.4 mm, natural, 100pcs.
TY5K3-PA66HS-NA 152-11309
Primerjava
Ne pozabite
100 pcs.
Natural (NA) TY5K3-PA66HS-NA 152-11309
Heat Shrinkable Tubing 3:1 flexible 18/6 transparent
3:1 shrink ratio tubing is ideal in many applications.
Primerjava
Heat Shrinkable Tubing 3:1 flexible 18/6 transparent
TF34-18/6-PO-X-CL 333-31803
Primerjava
Ne pozabite
30 metre
Transparent (CL) TF34-18/6-PO-X-CL 333-31803
Heat Shrinkable Tubing 3:1 flexible 24/8 transparent
3:1 shrink ratio tubing is ideal in many applications.
Primerjava
Heat Shrinkable Tubing 3:1 flexible 24/8 transparent
TF34-24/8-PO-X-CL 333-32403
Primerjava
Ne pozabite
30 metre
Transparent (CL) TF34-24/8-PO-X-CL 333-32403
Cable tie inside serrated, 198x3.5mm, ⌀1.5-50.0mm, black, 500pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 198x3.5mm, ⌀1.5-50.0mm, black, 500pcs.
T30L-PA66HS-BK 111-00189
Primerjava
Ne pozabite
500 pcs.
Black (BK) T30L-PA66HS-BK 111-00189
Cable tie inside serrated, 148.0x3.6mm, ⌀1.5-35.0mm, black, 1000pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 148.0x3.6mm, ⌀1.5-35.0mm, black, 1000pcs.
T30R-PA66HSUV-BK 111-03071
Primerjava
Ne pozabite
1000 pcs.
Black (BK) T30R-PA66HSUV-BK 111-03071
Cable tie inside serrated, 305.0x4.6mm, ⌀1.5-80.0mm, black, 1000pcs.
Head design guarantees high tensile strength and a low insertion force.
Primerjava
Cable tie inside serrated, 305.0x4.6mm, ⌀1.5-80.0mm, black, 1000pcs.
T50I-PA66-BK 111-05216
Primerjava
Ne pozabite
1000
Black (BK) T50I-PA66-BK 111-05216
Cable tie inside serrated, 305.0x4.6mm, ⌀1.5-80.0mm, blue, 1000pcs.
Head design guarantees high tensile strength and a low insertion force.
Primerjava
Cable tie inside serrated, 305.0x4.6mm, ⌀1.5-80.0mm, blue, 1000pcs.
T50I-PA66-BU 111-05221
Primerjava
Ne pozabite
1000
Blue (BU) T50I-PA66-BU 111-05221
Cable tie inside serrated, 305.0x4.6mm, ⌀1.5-80.0mm, brown, 1000pcs.
T-Series Cable Ties feature inside serrations to provide a positive hold on wire and cable bundles.
Primerjava
Cable tie inside serrated, 305.0x4.6mm, ⌀1.5-80.0mm, brown, 1000pcs.
T50I-PA66-BN 111-05223
Primerjava
Ne pozabite
1000
Brown (BN) T50I-PA66-BN 111-05223
Cable tie inside serrated, 305.0x4.6mm, ⌀1.5-80.0mm, green, 1000pcs.
T-Series Cable Ties feature inside serrations to provide a positive hold on wire and cable bundles.
Primerjava
Cable tie inside serrated, 305.0x4.6mm, ⌀1.5-80.0mm, green, 1000pcs.
T50I-PA66-GN 111-05225
Primerjava
Ne pozabite
1000
Green (GN) T50I-PA66-GN 111-05225
Cable tie inside serrated, 305.0x4.6mm, ⌀1.5-80.0mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 305.0x4.6mm, ⌀1.5-80.0mm, natural, 100pcs.
T50I-PA66-NA 111-05228
Primerjava
Ne pozabite
100 pcs.
Natural (NA) T50I-PA66-NA 111-05228
Cable tie inside serrated, 305.0x4.6mm, ⌀1.5-80.0mm, natural, 50pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 305.0x4.6mm, ⌀1.5-80.0mm, natural, 50pcs.
T50I-PA66-NA 111-05229
Primerjava
Ne pozabite
50 pcs.
Natural (NA) T50I-PA66-NA 111-05229
Cable tie inside serrated, 305.0x4.6mm, ⌀1.5-80.0mm, orange, 1000pcs.
T-Series Cable Ties feature inside serrations to provide a positive hold on wire and cable bundles.
Primerjava
Cable tie inside serrated, 305.0x4.6mm, ⌀1.5-80.0mm, orange, 1000pcs.
T50I-PA66-OG 111-05232
Primerjava
Ne pozabite
1000
Orange (OG) T50I-PA66-OG 111-05232
Cable tie inside serrated, 305.0x4.6mm, ⌀1.5-80.0mm, red, 1000pcs.
Head design guarantees high tensile strength and a low insertion force.
Primerjava
Cable tie inside serrated, 305.0x4.6mm, ⌀1.5-80.0mm, red, 1000pcs.
T50I-PA66-RD 111-05236
Primerjava
Ne pozabite
1000 pcs.
Red (RD) T50I-PA66-RD 111-05236
Cable tie inside serrated, 305.0x4.6mm, ⌀1.5-80.0mm, grey, 1000pcs.
The PVDF tie is coloured grey in order to visibly distinguish it easily from other materials.
Primerjava
Cable tie inside serrated, 305.0x4.6mm, ⌀1.5-80.0mm, grey, 1000pcs.
T50I-PA66-GY 111-05239
Primerjava
Ne pozabite
1000
Grey (GY) T50I-PA66-GY 111-05239
Cable tie inside serrated, 305.0x4.6mm, ⌀1.5-80.0mm, yellow, 1000pcs.
T-Series Cable Ties feature inside serrations to provide a positive hold on wire and cable bundles.
Primerjava
Cable tie inside serrated, 305.0x4.6mm, ⌀1.5-80.0mm, yellow, 1000pcs.
T50I-PA66-YE 111-05244
Primerjava
Ne pozabite
1000
Yellow (YE) T50I-PA66-YE 111-05244
Cable tie inside serrated, 305.0x4.6mm, ⌀1.5-80.0mm, black, 1000pcs.
Head design guarantees high tensile strength and a low insertion force.
Primerjava
Cable tie inside serrated, 305.0x4.6mm, ⌀1.5-80.0mm, black, 1000pcs.
T50I-PA66HSUV-BK 111-05253
Primerjava
Ne pozabite
1000 pcs.
Black (BK) T50I-PA66HSUV-BK 111-05253
Cable tie inside serrated, 300x4.6mm, ⌀1.5-85.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 300x4.6mm, ⌀1.5-85.0mm, black, 100pcs.
T50I-PA11-BK 111-02217
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.
Primerjava
Ne pozabite
100 pcs.
Black (BK) T50I-PA11-BK 111-02217
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.
Cable tie inside serrated, 390.0x4.8mm, ⌀1.5-110.0mm, black, 1000pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 390.0x4.8mm, ⌀1.5-110.0mm, black, 1000pcs.
T50L-PA66HSUV-BK 111-05472
Primerjava
Ne pozabite
1000 pcs.
Black (BK) T50L-PA66HSUV-BK 111-05472
Cable tie inside serrated, 365.0x3.6mm, ⌀1.5-105.0mm, black, 100pcs.
Head design guarantees high tensile strength and a low insertion force.
Primerjava
Cable tie inside serrated, 365.0x3.6mm, ⌀1.5-105.0mm, black, 100pcs.
T30XL-PA66-BK 111-02901
Primerjava
Ne pozabite
100 pcs.
Black (BK) T30XL-PA66-BK 111-02901
Cable tie inside serrated, 245x4.6mm, ⌀1.5-65.0mm, black, 200pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 245x4.6mm, ⌀1.5-65.0mm, black, 200pcs.
T50M-PA66UV-BK 111-02296
Primerjava
Ne pozabite
200 pcs.
Black (BK) T50M-PA66UV-BK 111-02296
Cable tie inside serrated, 560.0x12.7mm, ⌀12.5-160.0mm, black, 25pcs.
Heavy duty T-Series cable ties feature inside serrations to provide a positive hold on wire and cable bundles.
Primerjava
Cable tie inside serrated, 560.0x12.7mm, ⌀12.5-160.0mm, black, 25pcs.
T255M-PA66HIRHSUV-BK 111-25300
Primerjava
Ne pozabite
25 pcs.
Black (BK) T255M-PA66HIRHSUV-BK 111-25300
Facebook  Instagram  X  YouTube  LinkedIn  Link Corporate Blog 
Kontakt Pogoji Podatki o podjetju Navodila in zaveze Izjava o zasebnosti Zemljevid spletnega mesta Novice
Update: 26/10/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.290.3) | Update: 26/10/2025 | Nastavitve zasebnosti
Iskanje prodajalca Kontakt