Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
07/10/2025

Results for "TLFD DS – 2:1 Rail Limited Fire Hazard"

804 products found 0 further hits
Please note:  The combination of terms you searched for returned no matching results.  Below are results that match parts of your search.

Tip: Try changing or removing terms to improve the relevance of your search results.

There are results in the following categories:
Cable Ties and Fixings

Cable Ties and Fixings  (347)

Cable Ties Inside Serrated  (83) Cable Ties Without Serration  (11) Cable Ties, Releasable  (8) Cable Ties, Stainless Steel  (34) Cable Ties With Fixing Elements  (22) Cable Tie Mounts  (65) Fixing Elements  (16) Clips, Clamps and Plugs  (119)
Cable Ties and Fixings
Cable Ties and Fixings (347)
Insulation

Insulation  (297)

Heat Shrink Tubing  (286) Heat Shrinkable Moulded Shapes  (14)
Insulation
Insulation (297)
Cable Protection Systems

Cable Protection Systems  (32)

Protective Tubing and Spiral Binding  (12) Expandable Braided Sleeves  (12) Open Woven Sleeves  (8)
Cable Protection Systems
Cable Protection Systems (32)
Electrical Installation

Electrical Installation  (58)

Electrical Tapes  (3) Cast Resin Technology  (12) Gel Technology  (5) Pre-insulated Terminals  (5) Lugs and Links  (33)
Electrical Installation
Electrical Installation (58)
Identification Systems

Identification Systems  (59)

Wire and Cable Markers  (31) Control Panel Labelling  (17) RFID tags and cable ties  (16) Hazardous Area Identification  (4) Printers and Software  (8)
Identification Systems
Identification Systems (59)
Application Tooling

Application Tooling  (11)

Application Tooling for Cable Ties  (11)
Application Tooling
Application Tooling (11)
804 products
Reset all
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 180°, black, 140pcs.
Compare
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 180°, black, 140pcs.
RCC180LM10-PA66HIRHSUV/ST/ZN-BK 151-01481
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
140 pcs.
Black (BK) RCC180LM10-PA66HIRHSUV/ST/ZN-BK 151-01481
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 180°, black, 140pcs.
Compare
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 180°, black, 140pcs.
RCC180LM12-PA66HIRHSUV/ST/ZN-BK 151-01482
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
140 pcs.
Black (BK) RCC180LM12-PA66HIRHSUV/ST/ZN-BK 151-01482
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 140pcs.
Compare
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 140pcs.
RCC180LM6-PA66HIRHSUV/ST/ZN-BK 151-01655
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
140 pcs.
Black (BK) RCC180LM6-PA66HIRHSUV/ST/ZN-BK 151-01655
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 140pcs.
Compare
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 140pcs.
RCC180LM8-PA66HIRHSUV/ST/ZN-BK 151-01480
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
140 pcs.
Black (BK) RCC180LM8-PA66HIRHSUV/ST/ZN-BK 151-01480
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 180°, black, 140pcs.
Compare
P-clamp medium, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 180°, black, 140pcs.
RCC180MM10-PA66HIRHSUV/ST/ZN-BK 151-01478
Compare
Add to watchlist
140 pcs.
Black (BK) RCC180MM10-PA66HIRHSUV/ST/ZN-BK 151-01478
P-clamp medium, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 180°, black, 140pcs.
Compare
P-clamp medium, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 180°, black, 140pcs.
RCC180MM12-PA66HIRHSUV/ST/ZN-BK 151-01479
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
140 pcs.
Black (BK) RCC180MM12-PA66HIRHSUV/ST/ZN-BK 151-01479
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 140pcs.
Compare
P-clamp medium, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 140pcs.
RCC180MM6-PA66HIRHSUV/ST/ZN-BK 151-01654
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
140 pcs.
Black (BK) RCC180MM6-PA66HIRHSUV/ST/ZN-BK 151-01654
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 140pcs.
Compare
P-clamp medium, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 140pcs.
RCC180MM8-PA66HIRHSUV/ST/ZN-BK 151-01477
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
140 pcs.
Black (BK) RCC180MM8-PA66HIRHSUV/ST/ZN-BK 151-01477
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 180°, black, 160pcs.
Compare
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 180°, black, 160pcs.
RCC180SM12-PA66HIRHSUV/ST/ZN-BK 151-01476
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
160 pcs.
Black (BK) RCC180SM12-PA66HIRHSUV/ST/ZN-BK 151-01476
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 160pcs.
Compare
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 160pcs.
RCC180SM6-PA66HIRHSUV/ST/ZN-BK 151-01653
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
160 pcs.
Black (BK) RCC180SM6-PA66HIRHSUV/ST/ZN-BK 151-01653
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 90°, black, 160pcs.
Compare
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 90°, black, 160pcs.
RCC90SM10-PA66HIRHSUV/ST/ZN-BK 151-01493
Compare
Add to watchlist
160 pcs.
Black (BK) RCC90SM10-PA66HIRHSUV/ST/ZN-BK 151-01493
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 90°, black, 160pcs.
Compare
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 90°, black, 160pcs.
RCC90SM6-PA66HIRHSUV/ST/ZN-BK 151-01659
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
160 pcs.
Black (BK) RCC90SM6-PA66HIRHSUV/ST/ZN-BK 151-01659
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 180°, black, 160pcs.
RCD180SM10.
Compare
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 180°, black, 160pcs.
RCD180SM10-PA66HIRHSUV/ST/ZN-BK 151-01501
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
160 pcs.
Black (BK) RCD180SM10-PA66HIRHSUV/ST/ZN-BK 151-01501
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 180°, black, 140pcs.
Compare
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 180°, black, 140pcs.
RCD180LM10-PA66HIRHSUV/ST/ZN-BK 151-01507
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
140 pcs.
Black (BK) RCD180LM10-PA66HIRHSUV/ST/ZN-BK 151-01507
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 140pcs.
Compare
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 140pcs.
RCD180LM8-PA66HIRHSUV/ST/ZN-BK 151-01506
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
140 pcs.
Black (BK) RCD180LM8-PA66HIRHSUV/ST/ZN-BK 151-01506
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 180°, black, 140pcs.
RCD180MM10.
Compare
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 180°, black, 140pcs.
RCD180MM10-PA66HIRHSUV/ST/ZN-BK 151-01504
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
140 pcs.
Black (BK) RCD180MM10-PA66HIRHSUV/ST/ZN-BK 151-01504
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 140pcs.
Compare
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 140pcs.
RCD180MM8-PA66HIRHSUV/ST/ZN-BK 151-01503
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
140 pcs.
Black (BK) RCD180MM8-PA66HIRHSUV/ST/ZN-BK 151-01503
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 160pcs.
Compare
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 160pcs.
RCD180SM8-PA66HIRHSUV/ST/ZN-BK 151-01499
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
160 pcs.
Black (BK) RCD180SM8-PA66HIRHSUV/ST/ZN-BK 151-01499
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 90°, black, 160pcs.
Compare
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 90°, black, 160pcs.
RCD90SM10-PA66HIRHSUV/ST/ZN-BK 151-01519
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
160 pcs.
Black (BK) RCD90SM10-PA66HIRHSUV/ST/ZN-BK 151-01519
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Slit cable cover, Dmax=16mm, -60 °C to +110 °C, intermittent +140 °C, black, 25m
HelaWrap Cable Cover - HWPP - black.
Compare
Slit cable cover, Dmax=16mm, -60 °C to +110 °C, intermittent +140 °C, black, 25m
HWPP16-PP-BK 161-64201
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
25 metre
Black (BK) HWPP16-PP-BK 161-64201
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 150x3.5mm, ⌀1.5-35.0mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 150x3.5mm, ⌀1.5-35.0mm, natural, 100pcs.
T30R-PA66HS-NA 111-03259
Compare
Add to watchlist
100 pcs.
Natural (NA) T30R-PA66HS-NA 111-03259
Cable tie mount for adhesive use, Wmax=5.4mm, black, 100pcs.
FlexTack FMB for round and angled surfaces
Compare
Cable tie mount for adhesive use, Wmax=5.4mm, black, 100pcs.
FMB4APT-A-PA66HS-BK 151-02219
Compare
Add to watchlist
100 pcs.
Black (BK) FMB4APT-A-PA66HS-BK 151-02219
Cable tie mount for screw fixation, Wmax=6.0mm, ⌀4.5 mm, M4 Screw, natural, 100pcs.
KR6G5 Srew Fixing Mounts with curved design
Compare
Cable tie mount for screw fixation, Wmax=6.0mm, ⌀4.5 mm, M4 Screw, natural, 100pcs.
KR6G5-PA66-NA 151-24619
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) KR6G5-PA66-NA 151-24619
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
RFID cable tie, durable, 125 kHz (LF), 200x4.6mm, ⌀1.5-50mm, blue, 100pcs.
MCTRFID – detectable cable ties (metal content) with RFID transponder.
Compare
RFID cable tie, durable, 125 kHz (LF), 200x4.6mm, ⌀1.5-50mm, blue, 100pcs.
MCTRFIDCLA-PA66MD-BU 111-01976
Compare
Add to watchlist
100 pcs.
Blue (BU) MCTRFIDCLA-PA66MD-BU 111-01976
RFID cable tie, durable, 13.56 MHz (HF), 200x4.6mm, ⌀1.5-50mm, blue, 100pcs.
MCTRFID – detectable cable ties (metal content) with RFID transponder.
Compare
RFID cable tie, durable, 13.56 MHz (HF), 200x4.6mm, ⌀1.5-50mm, blue, 100pcs.
MCTRFIDCHA-PA66MD-BU 111-01676
Compare
Add to watchlist
100 pcs.
Blue (BU) MCTRFIDCHA-PA66MD-BU 111-01676
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀5.6 mm, 180°, black, 280pcs.
Compare
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀5.6 mm, 180°, black, 280pcs.
RCBHANGER-PA66HIRHSUV/ZN-BK 151-02875
Compare
Add to watchlist
280 pcs.
Black (BK) RCBHANGER-PA66HIRHSUV/ZN-BK 151-02875
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀5.6 mm, 180°, black, 160pcs.
Ratchet P-Clamp Hanger, RCCHANGER.
Compare
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀5.6 mm, 180°, black, 160pcs.
RCCHANGER-PA66HIRHSUV/ZN-BK 151-03057
Compare
Add to watchlist
160 pcs.
Black (BK) RCCHANGER-PA66HIRHSUV/ZN-BK 151-03057
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 160pcs.
Compare
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 160pcs.
RCC180SM8-PA66HIRHSUV/ST/ZN-BK 151-01474
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
160 pcs.
Black (BK) RCC180SM8-PA66HIRHSUV/ST/ZN-BK 151-01474
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for hole (round), inside serrated, ⌀5.0-85.0mm, black, 500pcs.
These fir tree fixings can also be used in threaded, blind holes.
Compare
Fixing tie for hole (round), inside serrated, ⌀5.0-85.0mm, black, 500pcs.
T50IFT7-PA66HS-BK 150-00700
Compare
Add to watchlist
500 pcs.
Black (BK) T50IFT7-PA66HS-BK 150-00700
Cable tie mount for adhesive use, Wmax=4.0mm, ⌀2.2 mm, natural, 100pcs.
TY3G1 TY3G1S Natural Screw Fixing Cable Tie Mount
Compare
Cable tie mount for adhesive use, Wmax=4.0mm, ⌀2.2 mm, natural, 100pcs.
TY3G1S-PA66-NA 151-11319
Compare
Add to watchlist
100 pcs.
Natural (NA) TY3G1S-PA66-NA 151-11319
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, natural, 100pcs.
KR8G5 Srew Fixing Mounts with curved design
Compare
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, natural, 100pcs.
KR8G5-PA66-NA 151-24819
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) KR8G5-PA66-NA 151-24819
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 365x7.6mm, ⌀5.0-100.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 365x7.6mm, ⌀5.0-100.0mm, black, 100pcs.
T150R(H)-PA66W-BK 111-14860
Compare
Add to watchlist
100 pcs.
Black (BK) T150R(H)-PA66W-BK 111-14860
Cable tie inside serrated, 205.0x2.5mm, ⌀1.5-50mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 205.0x2.5mm, ⌀1.5-50mm, black, 100pcs.
T18L-PA66W-BK 111-02160
Compare
Add to watchlist
100 pcs.
Black (BK) T18L-PA66W-BK 111-02160
Cable tie inside serrated, 205.0x2.5mm, ⌀1.5-50mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 205.0x2.5mm, ⌀1.5-50mm, natural, 100pcs.
T18L-PA66-NA 111-02119
Compare
Add to watchlist
100 pcs.
Natural (NA) T18L-PA66-NA 111-02119
Cable tie inside serrated, 150.0x3.5mm, ⌀1.5-35mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 150.0x3.5mm, ⌀1.5-35mm, black, 100pcs.
T30R-PA66W-BK 111-03260
Compare
Add to watchlist
100 pcs.
Black (BK) T30R-PA66W-BK 111-03260
Fixing tie for hole (round), inside serrated, ⌀4.0-45.0mm, black, 500pcs.
Disc feature prevents rattling in high-vibration applications and protects against debris ingress.
Compare
Fixing tie for hole (round), inside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50RFT10-PA66HS-BK 111-85810
Compare
Add to watchlist
500 pcs.
Black (BK) T50RFT10-PA66HS-BK 111-85810
Cable tie mount for adhesive use, Wmax=8.0mm, ⌀3.2 mm, natural, 100pcs.
TY8G1 TY8G1S Natural Fixing Cable Tie Screw Mount
Compare
Cable tie mount for adhesive use, Wmax=8.0mm, ⌀3.2 mm, natural, 100pcs.
TY8G1S-PA66-NA 151-11819
Compare
Add to watchlist
100 pcs.
Natural (NA) TY8G1S-PA66-NA 151-11819
Cable tie inside serrated, 150x3.5mm, ⌀1.5-35mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 150x3.5mm, ⌀1.5-35mm, natural, 100pcs.
T30R-PA66-NA 111-03219
Compare
Add to watchlist
100 pcs.
Natural (NA) T30R-PA66-NA 111-03219
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
2-piece fixing tie with edge clip 1-3mm, side fixing.
Compare
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
T50ROSEC21-PA66HS/PA66HIRHS-BK 156-00010
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSEC21-PA66HS/PA66HIRHS-BK 156-00010
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
Compare
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
T50ROSEC19-PA66HS/PA66HIRHS-BK 156-04602
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSEC19-PA66HS/PA66HIRHS-BK 156-04602
Fixing tie for hole (round), inside serrated, ⌀5.0-30.0mm, black, 500pcs.
Compare
Fixing tie for hole (round), inside serrated, ⌀5.0-30.0mm, black, 500pcs.
T30RFT6LG-PA66HS/PA66HIRHS-BK 150-31090
Compare
Add to watchlist
500 pcs.
Black (BK) T30RFT6LG-PA66HS/PA66HIRHS-BK 150-31090
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22mm, black, 100pcs.
T18R-PA66W-BK 111-01960
Compare
Add to watchlist
100 pcs.
Black (BK) T18R-PA66W-BK 111-01960
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable tie with edge clip.
Compare
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSEC4A-PA66HS/PA66HIRHS-BK 150-76099
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSEC4A-PA66HS/PA66HIRHS-BK 150-76099
Fixing tie for hole (round), inside serrated, ⌀5.0-45.0mm, black, 500pcs.
Compare
Fixing tie for hole (round), inside serrated, ⌀5.0-45.0mm, black, 500pcs.
T50RFT6LG-PA66HS/PA66HIRHS-BK 150-31091
Compare
Add to watchlist
500 pcs.
Black (BK) T50RFT6LG-PA66HS/PA66HIRHS-BK 150-31091
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSEC5A-PA66HS/PA66HIRHS-BK 150-40591
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSEC5A-PA66HS/PA66HIRHS-BK 150-40591
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22.0mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22.0mm, natural, 100pcs.
T18R-PA66-NA 111-01919
Compare
Add to watchlist
100 pcs.
Natural (NA) T18R-PA66-NA 111-01919
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.31 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.
Mount and tie combination makes it easy to service bundles in the field.
Compare
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.31 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.
HDM321-PA66HIRHSUV-BK 151-07100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
500 pcs.
Black (BK) HDM321-PA66HIRHSUV-BK 151-07100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount with pipe/tube holder, Wmax=8.8mm, black, 50pcs.
New innovative QwicGrip for fastening to e.g. solar rails with cable ties.
Compare
Cable tie mount with pipe/tube holder, Wmax=8.8mm, black, 50pcs.
QGDHC5.2-8.0M-PA66W-BK 151-04088
Compare
Add to watchlist
50 pcs.
Black (BK) QGDHC5.2-8.0M-PA66W-BK 151-04088
Cable tie outside serrated for direct fixation, 270.0x12.7mm, ⌀70.0mm, black, 500pcs.
The 1-piece design of Aerial Support Ties reduces installation time.
Compare
Cable tie outside serrated for direct fixation, 270.0x12.7mm, ⌀70.0mm, black, 500pcs.
TAS120M-PA66HIRHSUV-BK 111-01671
Compare
Add to watchlist
1 pcs.
Black (BK) TAS120M-PA66HIRHSUV-BK 111-01671
Cable tie outside serrated for direct fixation, 420.0x12.7mm, ⌀114.0mm, black, 500pc.
The 1-piece design of Aerial Support Ties reduces installation time.
Compare
Cable tie outside serrated for direct fixation, 420.0x12.7mm, ⌀114.0mm, black, 500pc.
TAS120L-PA66HIRHSUV-BK 111-01672
Compare
Add to watchlist
500 pcs.
Black (BK) TAS120L-PA66HIRHSUV-BK 111-01672
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀10.29 mm, ⌀10.0 mm, 3/8" (M10) Screw, black, 500pcs.
Compare
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀10.29 mm, ⌀10.0 mm, 3/8" (M10) Screw, black, 500pcs.
SAM400B-R-PA66HIRHSUV-BK 151-02102
Compare
Add to watchlist
500 pcs.
Black (BK) SAM400B-R-PA66HIRHSUV-BK 151-02102
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.31 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.
Mount positions bundles off cross members and frame rails to prevent abrasion and chafing.
Compare
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.31 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.
SAM320B-R-PA66HIRHSUV-BK 151-02099
Compare
Add to watchlist
500 pcs.
Black (BK) SAM320B-R-PA66HIRHSUV-BK 151-02099
Cable tie mount for cable bundles, Wmax=12.7mm, black, 50pcs.
The spacers can be easily rotated by hand, allowing the bundles to be crossed and rotated at any angle.
Compare
Cable tie mount for cable bundles, Wmax=12.7mm, black, 50pcs.
DSWS4-PA66HS/POM-BK 151-00644
Compare
Add to watchlist
50 pcs.
Black (BK) DSWS4-PA66HS/POM-BK 151-00644
Cable tie inside serrated, 535x13.2mm, ⌀12.0-150mm, black, 50pcs.
Compare
Cable tie inside serrated, 535x13.2mm, ⌀12.0-150mm, black, 50pcs.
LK5-PA66W-BK 111-60560
Compare
Add to watchlist
50 pcs.
Black (BK) LK5-PA66W-BK 111-60560
Gel cable joint, 9-20mm, 3 x 1.5mm² to 4 x 10mm², L=146mm, Polypropylene (PP)/Silicone (SI), green
Relicon Relifix V gel cable joints.
Compare
Gel cable joint, 9-20mm, 3 x 1.5mm² to 4 x 10mm², L=146mm, Polypropylene (PP)/Silicone (SI), green
Relifix 410-PP/SI-GN 435-00652
Compare
Add to watchlist
1 pack
Green (GN) Relifix 410-PP/SI-GN 435-00652
Gel cable joint, 9-20mm, 3 x 1.5mm² to 5 x 6mm², L=146mm, Polypropylene (PP)/Silicone (SI), green
Gel cable joint Relifix V 56, V516.
Compare
Gel cable joint, 9-20mm, 3 x 1.5mm² to 5 x 6mm², L=146mm, Polypropylene (PP)/Silicone (SI), green
Relifix V56-PP/SI-GN 435-00654
Compare
Add to watchlist
1 pack
Green (GN) Relifix V56-PP/SI-GN 435-00654
Gel, Polybutadiene (PBD) transparent/orange, 250ml
Two-component gel KH 100.
Compare
Gel, Polybutadiene (PBD) transparent/orange, 250ml
Gel-100 250 ml-PBD-CL/OG 435-00835
Compare
Add to watchlist
1 pcs.
Transparent (CL), Orange (OG) Gel-100 250 ml-PBD-CL/OG 435-00835
Fixing tie for hole (oval), outside serrated, ⌀4-50mm, black, 500pcs.
Being a two-piece assembly allows the tie head to be located in the most convenient position.
Compare
Fixing tie for hole (oval), outside serrated, ⌀4-50mm, black, 500pcs.
One Click FERRO-T50ROSSFT725-PA66HS/PA66W-BK 156-01577
Compare
Add to watchlist
500 pcs.
Black (BK) One Click FERRO-T50ROSSFT725-PA66HS/PA66W-BK 156-01577
Spare part for MK9SST, 1pc. (SP MK9SST replacement blade)
The MK9SST is an ideal tool for applying MBT-series stainless steel cable ties.
Compare
Spare part for MK9SST, 1pc. (SP MK9SST replacement blade)
SP MK9SST replacement blade-ST-GY 110-95273
Compare
Add to watchlist
1 pcs.
Grey (GY) SP MK9SST replacement blade-ST-GY 110-95273
Spare part for EVO7i, EVO7iSP, 1pc. (SP EVO7 Blade)
Blade, spare part for EVO7
Compare
Spare part for EVO7i, EVO7iSP, 1pc. (SP EVO7 Blade)
SP EVO7 Blade-ST-MIX 110-70021
Compare
Add to watchlist
1 pc.
Various (MIX) SP EVO7 Blade-ST-MIX 110-70021
Spare part for EVO9, EVO9i, EVO9SG, ..., 1pc. (SP EVO9 Blade)
Replacement blade for EVO 9 manual tensioning tool.
Compare
Spare part for EVO9, EVO9i, EVO9SG, ..., 1pc. (SP EVO9 Blade)
SP EVO9 Blade-SS-ML 110-80037
Compare
Add to watchlist
1 pcs.
Metal (ML) SP EVO9 Blade-SS-ML 110-80037
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
Fastening ties for 5.0 mm round welding or threaded studs.
Compare
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
T50SOSSBS5E-2-PA66HS-BK 157-00252
Compare
Add to watchlist
500 pcs.
Black (BK) T50SOSSBS5E-2-PA66HS-BK 157-00252
Stainless steel cable marker M-BOSS, embossing, 20.0x89.5mm, 500pcs.
Marker plates designed to survive the harshest environments.
Compare
Stainless steel cable marker M-BOSS, embossing, 20.0x89.5mm, 500pcs.
MBML20X90-SS316L-ML 544-80202
Compare
Add to watchlist
500 pcs.
Metal (ML) MBML20X90-SS316L-ML 544-80202
Stainless steel cable marker M-BOSS, embossing, 20.0x44.5mm, 1000pcs.
Marker plates designed to survive the harshest environments.
Compare
Stainless steel cable marker M-BOSS, embossing, 20.0x44.5mm, 1000pcs.
MBML20X45-SS316L-ML 544-80201
Compare
Add to watchlist
1000 pcs.
Metal (ML) MBML20X45-SS316L-ML 544-80201
Stainless steel cable marker M-BOSS, embossing, 10.0x89.5mm, 500pcs.
Marker plates designed to survive the harshest environments.
Compare
Stainless steel cable marker M-BOSS, embossing, 10.0x89.5mm, 500pcs.
MBML10X90-SS316L-ML 544-80102
Compare
Add to watchlist
500 pcs.
Metal (ML) MBML10X90-SS316L-ML 544-80102
Stainless steel cable marker M-BOSS, embossing, 10.0x44.5mm, 1000pcs.
Marker plates designed to survive the harshest environments.
Compare
Stainless steel cable marker M-BOSS, embossing, 10.0x44.5mm, 1000pcs.
MBML10X45-SS316L-ML 544-80101
Compare
Add to watchlist
1000 pcs.
Metal (ML) MBML10X45-SS316L-ML 544-80101
Thermal transfer ribbon, 110.0mm, black, 300m
Ribbons for printing on adhesive labels.
Compare
Thermal transfer ribbon, 110.0mm, black, 300m
TT822OUT 110MM-PET-BK 556-00101
Compare
Add to watchlist
1 pcs.
Black (BK) TT822OUT 110MM-PET-BK 556-00101
Thermal transfer ribbon, W=85.0mm, black, 300m
Compare
Thermal transfer ribbon, W=85.0mm, black, 300m
TT932DOUT 85MM-PET-BK 556-00117
Compare
Add to watchlist
1 pcs.
Black (BK) TT932DOUT 85MM-PET-BK 556-00117
Thermal transfer ribbon, W=110.0mm, black, 300m
Ribbons for printing on adhesive labels.
Compare
Thermal transfer ribbon, W=110.0mm, black, 300m
TT932DOUT 110MM-PET-BK 556-00118
Compare
Add to watchlist
1 pcs.
Black (BK) TT932DOUT 110MM-PET-BK 556-00118
Thermal transfer ribbon, 40.0mm, black, 300m
Compare
Thermal transfer ribbon, 40.0mm, black, 300m
TTDTHOUT 40MM-PET-BK 556-00139
Compare
Add to watchlist
1 pcs.
Black (BK) TTDTHOUT 40MM-PET-BK 556-00139
Thermal transfer ribbon, W=60.0mm, black, 300m
Compare
Thermal transfer ribbon, W=60.0mm, black, 300m
TTDTHOUT 60MM-PET-BK 556-00140
Compare
Add to watchlist
1 pcs.
Black (BK) TTDTHOUT 60MM-PET-BK 556-00140
Thermal transfer ribbon, W=30mm, black, 300m
Compare
Thermal transfer ribbon, W=30mm, black, 300m
TTRC+ 30MM-PET/DIV-BK 556-00114
Compare
Add to watchlist
1 pcs.
Black (BK) TTRC+ 30MM-PET/DIV-BK 556-00114
Thermal transfer ribbon, W=60mm, black, 300m
Compare
Thermal transfer ribbon, W=60mm, black, 300m
TTRC+ 60MM-PET/DIV-BK 556-00115
Compare
Add to watchlist
1 pcs.
Black (BK) TTRC+ 60MM-PET/DIV-BK 556-00115
Thermal transfer ribbon, W=100.0mm, white, 300m
Compare
Thermal transfer ribbon, W=100.0mm, white, 300m
TTRW 100MM-PET-WH 556-00133
Compare
Add to watchlist
1 pcs.
White (WH) TTRW 100MM-PET-WH 556-00133
HT338 up to 7.9 mm strap width
HT338 Manual tensioning tool for stainless steel cable ties.
Compare
HT338 up to 7.9 mm strap width
HT338-32-ST-ML 924-00001
Compare
Add to watchlist
1 pc.
Metal (ML) HT338-32-ST-ML 924-00001
HT338 up to 7.9 mm strap width
HT338 Manual tensioning tool for stainless steel cable ties.
Compare
HT338 up to 7.9 mm strap width
HT338-33-ST-ML 924-00002
Compare
Add to watchlist
1 pc.
Metal (ML) HT338-33-ST-ML 924-00002
HT338 up to 7.9 mm strap width
HT338 Manual tensioning tool for stainless steel cable ties.
Compare
HT338 up to 7.9 mm strap width
HT338-34-ST-ML 924-00003
Compare
Add to watchlist
1 pc.
Metal (ML) HT338-34-ST-ML 924-00003
Accessory, Ratchet Clamps, black, 100pc. (RCTT)
Tension tab can be used to ensure specific tension.
Compare
Accessory, Ratchet Clamps, black, 100pc. (RCTT)
RCTT-PA66HIRHSUV-BK 151-01529
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) RCTT-PA66HIRHSUV-BK 151-01529
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Accessory, Ratchet Clamps, black, 100pc. (RCINSERTA)
Ratchet P-Clamp inserts for additional level of protection.
Compare
Accessory, Ratchet Clamps, black, 100pc. (RCINSERTA)
RCINSERTA-TPE-BK 151-01530
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) RCINSERTA-TPE-BK 151-01530
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Accessory, Ratchet Clamps, black, 100pc. (RCINSERTB)
Ratchet P-Clamp inserts for additional level of protection.
Compare
Accessory, Ratchet Clamps, black, 100pc. (RCINSERTB)
RCINSERTB-TPE-BK 151-01531
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) RCINSERTB-TPE-BK 151-01531
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Accessory, Ratchet Clamps, black, 100pc. (RCINSERTC)
Ratchet P-Clamp inserts for additional level of protection.
Compare
Accessory, Ratchet Clamps, black, 100pc. (RCINSERTC)
RCINSERTC-TPE-BK 151-01532
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) RCINSERTC-TPE-BK 151-01532
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Accessory, Ratchet Clamps, black, 100pc. (RCINSERTD)
Ratchet P-Clamp inserts for additional level of protection.
Compare
Accessory, Ratchet Clamps, black, 100pc. (RCINSERTD)
RCINSERTD-TPE-BK 151-01533
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) RCINSERTD-TPE-BK 151-01533
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Wire harness tape L=25m, W=19mm, T=0.25mm, black, 1 pc.
HelaTape Protect 250 is designed for cable harnessing and offers a very high temperature resistance.
Compare
Wire harness tape L=25m, W=19mm, T=0.25mm, black, 1 pc.
HTAPE-PROTECT250-PET-BK 712-10003
Compare
Add to watchlist
1 pcs.
Black (BK) HTAPE-PROTECT250-PET-BK 712-10003
Cast resin joint, Straight-through i, 3 x 1.5mm² to 5 x 2.5mm², L=182mm, 95 ml, Polyurethane resin (PUR) green
Straight-through joints i-Line SF (safe-filling) / Straight through joints i-A Line SF (safe-filling) – Armoured.
Compare
Cast resin joint, Straight-through i, 3 x 1.5mm² to 5 x 2.5mm², L=182mm, 95 ml, Polyurethane resin (PUR) green
i-0 / SF-PUR-GN 435-00080
Compare
Add to watchlist
1 pack
Green (GN) i-0 / SF-PUR-GN 435-00080
Cast resin joint, Straight-through i, 3 x 1.5mm² to 5 x 6mm², L=190mm, 165 ml, Polyurethane resin (PUR) green
Straight-through joints i-Line SF (safe-filling) / Straight through joints i-A Line SF (safe-filling) – Armoured.
Compare
Cast resin joint, Straight-through i, 3 x 1.5mm² to 5 x 6mm², L=190mm, 165 ml, Polyurethane resin (PUR) green
i-1 / SF-PUR-GN 435-00081
Compare
Add to watchlist
1 pack
Green (GN) i-1 / SF-PUR-GN 435-00081
Cast resin joint, Straight-through i, 5 x 1.5mm² to 5 x 16mm², L=276mm, 400 ml, Polyurethane resin (PUR) green
Straight-through joints i-Line SF (safe-filling) / Straight through joints i-A Line SF (safe-filling) – Armoured.
Compare
Cast resin joint, Straight-through i, 5 x 1.5mm² to 5 x 16mm², L=276mm, 400 ml, Polyurethane resin (PUR) green
i-2 / SF-PUR-GN 435-00082
Compare
Add to watchlist
1 set
Green (GN) i-2 / SF-PUR-GN 435-00082
Cast resin joint, Straight-through i, 5 x 10mm² to 5 x 35mm², L=360mm, 655 ml, Polyurethane resin (PUR) green
Straight-through joints i-Line SF (safe-filling) / Straight through joints i-A Line SF (safe-filling) – Armoured.
Compare
Cast resin joint, Straight-through i, 5 x 10mm² to 5 x 35mm², L=360mm, 655 ml, Polyurethane resin (PUR) green
i-3 / SF-PUR-GN 435-00083
Compare
Add to watchlist
1 pack
Green (GN) i-3 / SF-PUR-GN 435-00083
Cast resin, Polyurethane resin (PUR) green, 240ml
Two-component polyurethane cast resin PUR 33.
Compare
Cast resin, Polyurethane resin (PUR) green, 240ml
Resin-33-SF-N-PUR-GN 435-12114
Compare
Add to watchlist
1 pack
Green (GN) Resin-33-SF-N-PUR-GN 435-12114
Gel, Silicone (SI) green/transparent, 1000ml
RELICON Religel Plus - Fast curing and heat resistant two-component silicone gel.
Compare
Gel, Silicone (SI) green/transparent, 1000ml
Religel Plus 1.000-SI-CL/GN 435-00752
Compare
Add to watchlist
1 pcs.
Green (GN), Transparent (CL) Religel Plus 1.000-SI-CL/GN 435-00752
Accessory, Helawrap, blue, 10pcs. (HAT8)
Tool is designed for post-installation applications, allowing for unplanned engineering changes to be corrected with ease.
Compare
Accessory, Helawrap, blue, 10pcs. (HAT8)
HAT8-PA66-BU 161-60001
Compare
Add to watchlist
10 pack
Blue (BU) HAT8-PA66-BU 161-60001
Accessory, Helawrap, blue, 10pcs. (HAT16)
Tool is designed for post-installation applications, allowing for unplanned engineering changes to be corrected with ease.
Compare
Accessory, Helawrap, blue, 10pcs. (HAT16)
HAT16-PA66-BU 161-60002
Compare
Add to watchlist
10 pack
Blue (BU) HAT16-PA66-BU 161-60002
Accessory, Helawrap, blue, 10pcs. (HAT20)
Tool is designed for post-installation applications, allowing for unplanned engineering changes to be corrected with ease.
Compare
Accessory, Helawrap, blue, 10pcs. (HAT20)
HAT20-PA66-BU 161-60003
Compare
Add to watchlist
10 pack
Blue (BU) HAT20-PA66-BU 161-60003
Accessory, Helawrap, blue, 10pcs. (HAT25)
Tool is designed for post-installation applications, allowing for unplanned engineering changes to be corrected with ease.
Compare
Accessory, Helawrap, blue, 10pcs. (HAT25)
HAT25-PA66-BU 161-60004
Compare
Add to watchlist
10 pack
Blue (BU) HAT25-PA66-BU 161-60004
Accessory, Helawrap, blue, 10pcs. (HAT30)
Tool is designed for post-installation applications, allowing for unplanned engineering changes to be corrected with ease.
Compare
Accessory, Helawrap, blue, 10pcs. (HAT30)
HAT30-PA66-BU 161-60005
Compare
Add to watchlist
10 pack
Blue (BU) HAT30-PA66-BU 161-60005
Accessory, Helawrap, blue, 5pcs. (HAT40)
Applicator tools are available for every Helawrap cover size.
Compare
Accessory, Helawrap, blue, 5pcs. (HAT40)
HAT40-PA66-BU 161-60006
Compare
Add to watchlist
5 pack
Blue (BU) HAT40-PA66-BU 161-60006
Heat Shrinkable Tubing 2:1 flexible 3.2/1.6 transparent
3:1 shrink ratio tubing is ideal in many applications.
Compare
Heat Shrinkable Tubing 2:1 flexible 3.2/1.6 transparent
TF24-3.2/1.6-PO-X-CL 309-40323
Compare
Add to watchlist
100 metre
Transparent (CL) TF24-3.2/1.6-PO-X-CL 309-40323
Heat Shrinkable Tubing 2:1 flexible 12.7/6.4 transparent
3:1 shrink ratio tubing is ideal in many applications.
Compare
Heat Shrinkable Tubing 2:1 flexible 12.7/6.4 transparent
TF24-12.7/6.4-PO-X-CL 309-41273
Compare
Add to watchlist
50 metre
Transparent (CL) TF24-12.7/6.4-PO-X-CL 309-41273
Accessory, LFPC-Series, black, 25m (LFPC83)
Compare
Accessory, LFPC-Series, black, 25m (LFPC83)
LFPC83-PO-BK 111-00257
Compare
Add to watchlist
25 metre
Black (BK) LFPC83-PO-BK 111-00257
Accessory, LFPC-Series, black, 25m (LFPC129)
Compare
Accessory, LFPC-Series, black, 25m (LFPC129)
LFPC129-PO-BK 111-00253
Compare
Add to watchlist
25 metre
Black (BK) LFPC129-PO-BK 111-00253
Accessory, LFPC-Series, black, 25m (LFPC132)
Compare
Accessory, LFPC-Series, black, 25m (LFPC132)
LFPC132-PO-BK 111-00254
Compare
Add to watchlist
25 metre
Black (BK) LFPC132-PO-BK 111-00254
Facebook  Instagram  X  YouTube  LinkedIn  Corporate Blog 
Contact Us Terms and Conditions Imprint Guidelines and commitments Privacy statement Newsletter Sitemap
Update: 04/10/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.287) | Update: 04/10/2025 | Privacy Settings
Contact