Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
22/08/2025

Results for "TLFD DS – 2:1 Rail Limited Fire Hazard"

755 products found 0 further hits
Please note:  The combination of terms you searched for returned no matching results.  Below are results that match parts of your search.

Tip: Try changing or removing terms to improve the relevance of your search results.

There are results in the following categories:
Cable Ties and Fixings

Cable Ties and Fixings  (347)

Cable Ties Inside Serrated  (83) Cable Ties Without Serration  (11) Cable Ties, Releasable  (8) Cable Ties, Stainless Steel  (34) Cable Ties With Fixing Elements  (22) Cable Tie Mounts  (65) Fixing Elements  (16) Clips, Clamps and Plugs  (119)
Cable Ties and Fixings
Cable Ties and Fixings (347)
Insulation

Insulation  (286)

Heat Shrink Tubing  (286) Heat Shrinkable Moulded Shapes  (3)
Insulation
Insulation (286)
Cable Protection Systems

Cable Protection Systems  (32)

Protective Tubing and Spiral Binding  (12) Expandable Braided Sleeves  (12) Open Woven Sleeves  (8)
Cable Protection Systems
Cable Protection Systems (32)
Electrical Installation

Electrical Installation  (20)

Electrical Tapes  (3) Cast Resin Technology  (12) Gel Technology  (5)
Electrical Installation
Electrical Installation (20)
Identification Systems

Identification Systems  (59)

Wire and Cable Markers  (31) Control Panel Labelling  (17) RFID tags and cable ties  (16) Hazardous Area Identification  (4) Printers and Software  (8)
Identification Systems
Identification Systems (59)
Application Tooling

Application Tooling  (11)

Application Tooling for Cable Ties  (11)
Application Tooling
Application Tooling (11)
755 products
Reset all
Cast resin joint, Straight-through i, 3 x 1.5mm² to 5 x 10mm², L=215mm, 220 ml, Polyurethane resin (PUR) green
Straight-through joints i-Line SF (safe-filling) / Straight through joints i-A Line SF (safe-filling) – Armoured.
Compare
Cast resin joint, Straight-through i, 3 x 1.5mm² to 5 x 10mm², L=215mm, 220 ml, Polyurethane resin (PUR) green
i-1.5 / SF-PUR-GN 435-00088
Compare
Add to watchlist
1 pack
Green (GN) i-1.5 / SF-PUR-GN 435-00088
Heat Shrinkable Tubing 6:1 Thick Wall Adhesive Lined length 1.22m 19.0/3.2 black
HA67-19/3.
Compare
Heat Shrinkable Tubing 6:1 Thick Wall Adhesive Lined length 1.22m 19.0/3.2 black
HA67-19.0/3.2-PO-X-BK 321-30000
Compare
Add to watchlist
10 pcs.
Black (BK) HA67-19.0/3.2-PO-X-BK 321-30000
Cable tie inside serrated, 300.0x7.6mm, ⌀5-80mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 300.0x7.6mm, ⌀5-80mm, black, 100pcs.
T120I-PA66W-BK 111-12160
Compare
Add to watchlist
100 pcs.
Black (BK) T120I-PA66W-BK 111-12160
Cable tie inside serrated, 760.0x7.6mm, ⌀5.0-225.0mm, black, 50pcs.
Compare
Cable tie inside serrated, 760.0x7.6mm, ⌀5.0-225.0mm, black, 50pcs.
T120L-PA66W-BK 111-12460
Compare
Add to watchlist
50 pcs.
Black (BK) T120L-PA66W-BK 111-12460
Cable tie inside serrated, 460x7.6mm, ⌀15.0-125mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 460x7.6mm, ⌀15.0-125mm, black, 100pcs.
T120M-PA66-BK 111-12610
Compare
Add to watchlist
100 pcs.
Black (BK) T120M-PA66-BK 111-12610
Cable clip for adhesive use/with pipe/tube holder, Dmax=18.0mm
Self adhesive one piece fixing clips RA- & RB-Series.
Compare
Cable clip for adhesive use/with pipe/tube holder, Dmax=18.0mm
RA18-PA66-NA 151-13119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) RA18-PA66-NA 151-13119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for adhesive use/with pipe/tube holder, Dmax=3.0mm
Self adhesive one piece fixing clips RA- & RB-Series.
Compare
Cable clip for adhesive use/with pipe/tube holder, Dmax=3.0mm
RA3-PA66-NA 151-13018
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) RA3-PA66-NA 151-13018
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 100pcs.
H3P-PA66HS-BK 211-60002
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H3P-PA66HS-BK 211-60002
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 100pcs.
H4P-PA66HS-BK 211-60003
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H4P-PA66HS-BK 211-60003
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Compare
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.
H5P-PA66HS-BK 211-60004
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H5P-PA66HS-BK 211-60004
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 100pcs.
H6P-PA66HS-BK 211-60005
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) H6P-PA66HS-BK 211-60005
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
50 pcs.
Black (BK) ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C P-Clamp with chloroprene insert.
Compare
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
50 pcs.
Black (BK) ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
50 pcs.
Black (BK) ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Heat Shrinkable Tubing 6:1 Thick Wall Adhesive Lined length 1.22m 33.0/5.5 black
HA67-33/5.
Compare
Heat Shrinkable Tubing 6:1 Thick Wall Adhesive Lined length 1.22m 33.0/5.5 black
HA67-33.0/5.5-PO-X-BK 321-30100
Compare
Add to watchlist
3 pcs.
Black (BK) HA67-33.0/5.5-PO-X-BK 321-30100
Heat Shrinkable Tubing 6:1 Thick Wall Adhesive Lined length 1.22m 44.4/7.4 black
Due to the high shrink ratio HA67 is suitable for complex shapes and dimensions.
Compare
Heat Shrinkable Tubing 6:1 Thick Wall Adhesive Lined length 1.22m 44.4/7.4 black
HA67-44.4/7.4-PO-X-BK 321-30200
Compare
Add to watchlist
2 pcs.
Black (BK) HA67-44.4/7.4-PO-X-BK 321-30200
Heat Shrinkable Tubing 6:1 Thick Wall Adhesive Lined length 1.22m 50.8/8.3 black
HA67_50/8.
Compare
Heat Shrinkable Tubing 6:1 Thick Wall Adhesive Lined length 1.22m 50.8/8.3 black
HA67-50.8/8.3-PO-X-BK 321-30300
Compare
Add to watchlist
2 pcs.
Black (BK) HA67-50.8/8.3-PO-X-BK 321-30300
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀5.5 mm, M4 Screw, black, 100pcs.
Compare
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀5.5 mm, M4 Screw, black, 100pcs.
LKC-PA66-BK 151-27010
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) LKC-PA66-BK 151-27010
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, black, 100pcs.
Compare
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, black, 100pcs.
CTM3-PA66-BK 151-30600
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) CTM3-PA66-BK 151-30600
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀6.2 mm, ⌀6.2 mm, #1/4" (M6) Screw, black, 100pcs.
Eliminates the need for multiple sizes of fixed diameter clamps.
Compare
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀6.2 mm, ⌀6.2 mm, #1/4" (M6) Screw, black, 100pcs.
HDM25-PA66HIRHSUV-BK 151-00437
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) HDM25-PA66HIRHSUV-BK 151-00437
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀7.8 mm, ⌀7.9 mm, 5/16" (M8) Screw, black, 100pcs.
Mount and tie combination makes it easy to service bundles in the field.
Compare
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀7.8 mm, ⌀7.9 mm, 5/16" (M8) Screw, black, 100pcs.
HDM312-PA66HIRHSUV-BK 151-00439
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) HDM312-PA66HIRHSUV-BK 151-00439
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for adhesive use, Wmax=4.8mm, black, 100pcs.
PMB5 paste adhesive mount for fixing with paste / liquid adhesive.
Compare
Cable tie mount for adhesive use, Wmax=4.8mm, black, 100pcs.
PMB5-PA66HS-BK 151-02255
Compare
Add to watchlist
100 pcs.
Black (BK) PMB5-PA66HS-BK 151-02255
Cable tie inside serrated, 820.0x8.9mm, ⌀8.0-245.0mm, natural, 25pcs.
Heavy duty T-Series cable ties feature inside serrations to provide a positive hold on wire and cable bundles.
Compare
Cable tie inside serrated, 820.0x8.9mm, ⌀8.0-245.0mm, natural, 25pcs.
T150L-PA66-NA 111-15419
Compare
Add to watchlist
25 pcs.
Natural (NA) T150L-PA66-NA 111-15419
Cable tie inside serrated, 925.0x8.9mm, ⌀8.0-274.3mm, natural, 25pcs.
Heavy duty T-Series cable ties feature inside serrations to provide a positive hold on wire and cable bundles.
Compare
Cable tie inside serrated, 925.0x8.9mm, ⌀8.0-274.3mm, natural, 25pcs.
T150LL-PA66-NA 111-15719
Compare
Add to watchlist
25 pcs.
Natural (NA) T150LL-PA66-NA 111-15719
Cable tie inside serrated, 1095.0x8.9mm, ⌀152.0-330.0mm, black, 25pcs.
Heavy duty T-Series cable ties feature inside serrations to provide a positive hold on wire and cable bundles.
Compare
Cable tie inside serrated, 1095.0x8.9mm, ⌀152.0-330.0mm, black, 25pcs.
T150XL-PA66W-BK 111-15502
Compare
Add to watchlist
25 pcs.
Black (BK) T150XL-PA66W-BK 111-15502
Cable tie inside serrated, 565.3x12.4mm, ⌀12.0-150.0mm, black, 25pcs.
Heavy duty T-Series cable ties feature inside serrations to provide a positive hold on wire and cable bundles.
Compare
Cable tie inside serrated, 565.3x12.4mm, ⌀12.0-150.0mm, black, 25pcs.
T250M-PA66-BK 111-25001
Compare
Add to watchlist
25 pcs.
Black (BK) T250M-PA66-BK 111-25001
Cable tie inside serrated, 198x3.5mm, ⌀1.5-50.0mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 198x3.5mm, ⌀1.5-50.0mm, natural, 100pcs.
T30L-PA66HS-NA 111-03459
Compare
Add to watchlist
100 pcs.
Natural (NA) T30L-PA66HS-NA 111-03459
Cable tie inside serrated, 150x3.5mm, ⌀1.5-35.0mm, black, 1000pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 150x3.5mm, ⌀1.5-35.0mm, black, 1000pcs.
T30R-PA66W-BK 111-03280
Compare
Add to watchlist
1000 pcs.
Black (BK) T30R-PA66W-BK 111-03280
Cable tie inside serrated, 202x4.6mm, ⌀1.5-50.0mm, natural, 100pcs.
Compare
Cable tie inside serrated, 202x4.6mm, ⌀1.5-50.0mm, natural, 100pcs.
T50R-PA66HS-NA 111-04855
Compare
Add to watchlist
100
Natural (NA) T50R-PA66HS-NA 111-04855
Fixing tie for hole (oval), outside serrated, ⌀4-50mm, black, 500pcs.
Being a two-piece assembly allows the tie head to be located in the most convenient position.
Compare
Fixing tie for hole (oval), outside serrated, ⌀4-50mm, black, 500pcs.
One Click FERRO-T50ROSSFT725-PA66HS/PA66W-BK 156-01577
Compare
Add to watchlist
500 pcs.
Black (BK) One Click FERRO-T50ROSSFT725-PA66HS/PA66W-BK 156-01577
Cable tie inside serrated, 387x7.6mm, ⌀3.0-100mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 387x7.6mm, ⌀3.0-100mm, natural, 100pcs.
T120R(E)-PA66HS-NA 111-12059
Compare
Add to watchlist
100 pcs.
Natural (NA) T120R(E)-PA66HS-NA 111-12059
Releasable cable tie, 180x6.5mm, ⌀12.0-46.0mm, 150N, black, 100pcs.
Compare
Releasable cable tie, 180x6.5mm, ⌀12.0-46.0mm, 150N, black, 100pcs.
REL180-PA66-BK 115-00027
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) REL180-PA66-BK 115-00027
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Releasable cable tie, 880x28.0mm, ⌀240mm, 360N, black, 3pcs.
SOFTFIX XXL (880x28mm) in a bag with 3 pieces
Compare
Releasable cable tie, 880x28.0mm, ⌀240mm, 360N, black, 3pcs.
SOFTFIX XXL-TPU-BK 115-28898
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
3 pack
Black (BK) SOFTFIX XXL-TPU-BK 115-28898
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, inside serrated, ⌀9.5-57.1mm, black, 300pcs.
Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.
Compare
Fixing tie for stud, inside serrated, ⌀9.5-57.1mm, black, 300pcs.
WSS250-PA66HIRHSUV-BK 157-00400
Compare
Add to watchlist
300 pcs.
Black (BK) WSS250-PA66HIRHSUV-BK 157-00400
Fixing tie for screw fixation, inside serrated, ⌀1.5-45.0mm, black, 100pcs.
Screw mount style creates low insertion and high extraction force.
Compare
Fixing tie for screw fixation, inside serrated, ⌀1.5-45.0mm, black, 100pcs.
T50MR-PA66-BK 113-05010
Compare
Add to watchlist
100 pcs.
Black (BK) T50MR-PA66-BK 113-05010
Identification cable tie, 390.0x56.0mm, ⌀19.0-100.0mm, natural, 100pcs.
Cable tie features an identification plate to easily identify bundles.
Compare
Identification cable tie, 390.0x56.0mm, ⌀19.0-100.0mm, natural, 100pcs.
IT50L-PA66-NA 111-85319
Compare
Add to watchlist
100 pcs.
Natural (NA) IT50L-PA66-NA 111-85319
Identification cable tie, 203.2x29.0mm, ⌀10.0-44.0mm, natural, 50pcs.
Cable tie features an identification plate to easily identify bundles.
Compare
Identification cable tie, 203.2x29.0mm, ⌀10.0-44.0mm, natural, 50pcs.
IT50RD-PA66-NA 111-85219
Compare
Add to watchlist
50 pcs.
Natural (NA) IT50RD-PA66-NA 111-85219
Identification cable tie, 203.2x46.0mm, ⌀10.0-44.0mm, natural, 50pcs.
Cable tie features an identification plate to easily identify bundles.
Compare
Identification cable tie, 203.2x46.0mm, ⌀10.0-44.0mm, natural, 50pcs.
IT50RT-PA66-NA 111-85119
Compare
Add to watchlist
50 pcs.
Natural (NA) IT50RT-PA66-NA 111-85119
Cast resin joint, Straight-through i, 5 x 1.5mm² to 5 x 16mm², L=276mm, 400 ml, Polyurethane resin (PUR) green
Straight-through joints i-Line SF (safe-filling) / Straight through joints i-A Line SF (safe-filling) – Armoured.
Compare
Cast resin joint, Straight-through i, 5 x 1.5mm² to 5 x 16mm², L=276mm, 400 ml, Polyurethane resin (PUR) green
i-2 / SF-PUR-GN 435-00082
Compare
Add to watchlist
1 pack
Green (GN) i-2 / SF-PUR-GN 435-00082
Ratchet P-Clamp
Compare
Ratchet P-Clamp
4-8RCM8-PA66HIRHSUV-BK 151-03973
Compare
Add to watchlist
100 pcs.
Black (BK) 4-8RCM8-PA66HIRHSUV-BK 151-03973
Ratchet P-Clamp
Compare
Ratchet P-Clamp
4-8RC6.5PH-PA66HIRHSUV-BK 151-03975
Compare
Add to watchlist
100 pcs.
Black (BK) 4-8RC6.5PH-PA66HIRHSUV-BK 151-03975
Ratchet P-Clamp
Compare
Ratchet P-Clamp
4-8RCFT6.5-PA66HIRHSUV-BK 151-03976
Compare
Add to watchlist
100 pcs.
Black (BK) 4-8RCFT6.5-PA66HIRHSUV-BK 151-03976
Cable clip for adhesive use/with pipe/tube holder, Dmax=13.0mm
Self adhesive one piece fixing clips RA- & RB-Series.
Compare
Cable clip for adhesive use/with pipe/tube holder, Dmax=13.0mm
RA13-PA66-NA 151-13021
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) RA13-PA66-NA 151-13021
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for adhesive use/with pipe/tube holder, Dmax=6.0mm
RA6 self-adhesive clip for a quick and easy installation.
Compare
Cable clip for adhesive use/with pipe/tube holder, Dmax=6.0mm
RA6-PA66-NA 151-13019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) RA6-PA66-NA 151-13019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for adhesive use/with pipe/tube holder, Dmax=9.0mm
Self adhesive one piece fixing clips RA- & RB-Series.
Compare
Cable clip for adhesive use/with pipe/tube holder, Dmax=9.0mm
RA9-PA66-NA 151-13020
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) RA9-PA66-NA 151-13020
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Compare
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Natural (NA) ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Slit cable cover, Dmax=32mm, -60 °C to +110 °C, intermittent +140 °C, black, 25m
HelaWrap Cable Cover - HWPP - black.
Compare
Slit cable cover, Dmax=32mm, -60 °C to +110 °C, intermittent +140 °C, black, 25m
HWPP30-PP-BK 161-64501
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
25 pcs.
Black (BK) HWPP30-PP-BK 161-64501
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=6.0mm, ⌀4.5 mm, M4 Screw, black, 100pcs.
KR8G5 Srew Fixing Mounts with curved design
Compare
Cable tie mount for screw fixation, Wmax=6.0mm, ⌀4.5 mm, M4 Screw, black, 100pcs.
KR6G5-PA66W-BK 151-24660
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) KR6G5-PA66W-BK 151-24660
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, black, 100pcs.
KR8G5 Srew Fixing Mounts with curved design
Compare
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, black, 100pcs.
KR8G5-PA66HS-BK 151-24850
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) KR8G5-PA66HS-BK 151-24850
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀3.1 mm, natural, 1000pcs.
Cable Tie Mounts NY Series.
Compare
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀3.1 mm, natural, 1000pcs.
NY3256-PA66-NA 151-25219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
1000 pcs.
Natural (NA) NY3256-PA66-NA 151-25219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie not serrated vibration absorbing, 426x8.0mm, ⌀8.0-105mm, black, 50pcs.
Cable Ties KR-Series
Compare
Cable tie not serrated vibration absorbing, 426x8.0mm, ⌀8.0-105mm, black, 50pcs.
KR8/43-PA66HS-BK 121-74360
Compare
Add to watchlist
50 pcs.
Black (BK) KR8/43-PA66HS-BK 121-74360
Cable tie inside serrated, 530.0x8.9mm, ⌀8.0-150.0mm, natural, 25pcs.
Heavy duty T-Series cable ties feature inside serrations to provide a positive hold on wire and cable bundles.
Compare
Cable tie inside serrated, 530.0x8.9mm, ⌀8.0-150.0mm, natural, 25pcs.
T150M-PA66-NA 111-15619
Compare
Add to watchlist
25 pcs.
Natural (NA) T150M-PA66-NA 111-15619
Cable tie inside serrated, 1095.0x8.9mm, ⌀152.0-330.0mm, natural, 25pcs.
Heavy duty T-Series cable ties feature inside serrations to provide a positive hold on wire and cable bundles.
Compare
Cable tie inside serrated, 1095.0x8.9mm, ⌀152.0-330.0mm, natural, 25pcs.
T150XL-PA66-NA 111-15519
Compare
Add to watchlist
25 pcs.
Natural (NA) T150XL-PA66-NA 111-15519
Cable tie inside serrated, 240.0x2.8mm, ⌀1.5-65.0mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 240.0x2.8mm, ⌀1.5-65.0mm, natural, 100pcs.
T25L-PA66-NA 111-02519
Compare
Add to watchlist
100 pcs.
Natural (NA) T25L-PA66-NA 111-02519
Cable tie inside serrated, 290x3.5mm, ⌀1.5-80.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 290x3.5mm, ⌀1.5-80.0mm, black, 100pcs.
T30LL-PA66W-BK 111-03580
Compare
Add to watchlist
100 pcs.
Black (BK) T30LL-PA66W-BK 111-03580
Cable tie inside serrated, 390x4.7mm, ⌀1.5-110mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 390x4.7mm, ⌀1.5-110mm, natural, 100pcs.
T80L-PA66HS-NA 111-05459
Compare
Add to watchlist
100 pcs.
Natural (NA) T80L-PA66HS-NA 111-05459
Cable tie inside serrated for multiple routing, 395.0x4.7mm, ⌀1.6-101.6mm, black, 100pcs.
Double-head cable ties feature a dual locking design to secure two bundles at once.
Compare
Cable tie inside serrated for multiple routing, 395.0x4.7mm, ⌀1.6-101.6mm, black, 100pcs.
T50LDH-PA66W-BK 117-05460
Compare
Add to watchlist
100 pcs.
Black (BK) T50LDH-PA66W-BK 117-05460
Releasable cable tie, 180x7.0mm, ⌀10.0-45.0mm, 57N, black, 16pcs.
SOFTFIX XS (180x7mm) in a bag with 16 pieces
Compare
Releasable cable tie, 180x7.0mm, ⌀10.0-45.0mm, 57N, black, 16pcs.
SOFTFIX XS-TPU-BK 115-07190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
16 pack
Black (BK) SOFTFIX XS-TPU-BK 115-07190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Releasable cable tie, 260x7.0mm, ⌀70.0mm, 57N, black, 12pcs.
SOFTFIX S (260x7mm) in a bag with 12 pieces
Compare
Releasable cable tie, 260x7.0mm, ⌀70.0mm, 57N, black, 12pcs.
SOFTFIX S-TPU-BK 115-07270
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
12 pack
Black (BK) SOFTFIX S-TPU-BK 115-07270
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Releasable cable tie, 260.0x11.0mm, ⌀65.0mm, 123N, black, 8pcs.
SOFTFIX M (260x11mm) in a bag with 8 pieces
Compare
Releasable cable tie, 260.0x11.0mm, ⌀65.0mm, 123N, black, 8pcs.
SOFTFIX M-TPU-BK 115-11270
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
8 pack
Black (BK) SOFTFIX M-TPU-BK 115-11270
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Releasable cable tie, 340x11.0mm, ⌀90.0mm, 123N, black, 6pcs.
SOFTFIX L (340x11mm) in a bag with 6 pieces
Compare
Releasable cable tie, 340x11.0mm, ⌀90.0mm, 123N, black, 6pcs.
SOFTFIX L-TPU-BK 115-11350
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
6 pack
Black (BK) SOFTFIX L-TPU-BK 115-11350
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Releasable cable tie, 580x28.0mm, ⌀150mm, 360N, black, 3pcs.
SOFTFIX XL (580x28mm) in a bag with 3 pieces
Compare
Releasable cable tie, 580x28.0mm, ⌀150mm, 360N, black, 3pcs.
SOFTFIX XL-TPU-BK 115-28590
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
3 pack
Black (BK) SOFTFIX XL-TPU-BK 115-28590
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Releasable cable tie, 565.3x12.5mm, ⌀12.0-150.0mm, 1115N, black, 25pcs.
Releasable cable tie features a head design with extended pawl for quick release of bundles.
Compare
Releasable cable tie, 565.3x12.5mm, ⌀12.0-150.0mm, 1115N, black, 25pcs.
RT250M-PA66-BK 131-75610
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
25 pcs.
Black (BK) RT250M-PA66-BK 131-75610
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for screw fixation, inside serrated, ⌀5.0-102.0mm, black, 50pcs.
One-piece Screw Mount Cable Ties fasten with a screw or bolt to provide secure routing of cable bundles.
Compare
Fixing tie for screw fixation, inside serrated, ⌀5.0-102.0mm, black, 50pcs.
T120MR-PA66-BK 113-12020
Compare
Add to watchlist
50 pcs.
Black (BK) T120MR-PA66-BK 113-12020
Fixing tie for screw fixation, inside serrated, ⌀1.5-20.0mm, black, 100pcs.
Fastening tie for screwing.
Compare
Fixing tie for screw fixation, inside serrated, ⌀1.5-20.0mm, black, 100pcs.
T18MR-PA66-BK 113-01810
Compare
Add to watchlist
100 pcs.
Black (BK) T18MR-PA66-BK 113-01810
Cable tag, continuous, thermal transfer print, 100.0x15.0mm, white, reel=125pcs.
TIPTAG PU – printed mark has a tattoo-like permanency.
Compare
Cable tag, continuous, thermal transfer print, 100.0x15.0mm, white, reel=125pcs.
TTAGPU15X100WH-PUR-WH 556-25006
Compare
Add to watchlist
125 reel
White (WH) TTAGPU15X100WH-PUR-WH 556-25006
Identification cable tie, 110.0x20.5mm, ⌀1.5-19.0mm, natural, 100pcs.
Cable tie features an identification plate to easily identify bundles.
Compare
Identification cable tie, 110.0x20.5mm, ⌀1.5-19.0mm, natural, 100pcs.
IT18FL-PA66-NA 111-81919
Compare
Add to watchlist
100 pcs.
Natural (NA) IT18FL-PA66-NA 111-81919
Identification cable tie, 203.2x28.0mm, ⌀9.5-44.5mm, natural, 100pcs.
Cable tie features an identification plate to easily identify bundles.
Compare
Identification cable tie, 203.2x28.0mm, ⌀9.5-44.5mm, natural, 100pcs.
IT50R-PA66-NA 111-85019
Compare
Add to watchlist
100 pcs.
Natural (NA) IT50R-PA66-NA 111-85019
Cast resin joint, Straight-through i, 4 x 25mm² to 4 x 95mm², L=400mm, 1140 ml, Polyurethane resin (PUR) green
Straight-through joints i-Line SF (safe-filling) / Straight through joints i-A Line SF (safe-filling) – Armoured.
Compare
Cast resin joint, Straight-through i, 4 x 25mm² to 4 x 95mm², L=400mm, 1140 ml, Polyurethane resin (PUR) green
i-4 / SF-PUR-GN 435-00084
Compare
Add to watchlist
1 Pack
Green (GN) i-4 / SF-PUR-GN 435-00084
P-clamp fixing clamp, Dmin=12.7mm, Dmax=19.5mm, black, 280pcs.
Compare
P-clamp fixing clamp, Dmin=12.7mm, Dmax=19.5mm, black, 280pcs.
RCBHANGERFS-PA66HIRHSUV/ZN-BK 151-03620
Compare
Add to watchlist
280 pcs.
Black (BK) RCBHANGERFS-PA66HIRHSUV/ZN-BK 151-03620
P-clamp single-lobe clamp, Dmin=19.4mm, Dmax=36.0mm, 180°, black, 160pcs.
Ratchet P-Clamp Hanger, RCCHANGERFS.
Compare
P-clamp single-lobe clamp, Dmin=19.4mm, Dmax=36.0mm, 180°, black, 160pcs.
RCCHANGERFS-PA66HIRHSUV/ZN-BK 151-03621
Compare
Add to watchlist
160 pcs.
Black (BK) RCCHANGERFS-PA66HIRHSUV/ZN-BK 151-03621
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, 180°, black, 140pcs.
Compare
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, 180°, black, 140pcs.
RCDHANGERFS-PA66HIRHSUV/ZN-BK 151-03622
Compare
Add to watchlist
140 pcs.
Black (BK) RCDHANGERFS-PA66HIRHSUV/ZN-BK 151-03622
Cable tie inside serrated, 460x7.6mm, ⌀15.0-125mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 460x7.6mm, ⌀15.0-125mm, natural, 100pcs.
T120M-PA66-NA 111-12619
Compare
Add to watchlist
100 pcs.
Natural (NA) T120M-PA66-NA 111-12619
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
ALU12C-AL/CR-BK 211-15120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU12C-AL/CR-BK 211-15120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.
ALU6C-AL/CR-BK 211-15060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU6C-AL/CR-BK 211-15060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.
ALU8C-AL/CR-BK 211-15080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
100 pcs.
Black (BK) ALU8C-AL/CR-BK 211-15080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Slit cable cover, Dmax=9mm, -60 °C to +110 °C, intermittent +140 °C, black, 25m
HelaWrap Cable Cover - HWPP - black.
Compare
Slit cable cover, Dmax=9mm, -60 °C to +110 °C, intermittent +140 °C, black, 25m
HWPP8-PP-BK 161-64101
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
25 pcs.
Black (BK) HWPP8-PP-BK 161-64101
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Slit cable cover, Dmax=21mm, -60 °C to +110 °C, intermittent +140 °C, black, 25m
HelaWrap Cable Cover - HWPP - black.
Compare
Slit cable cover, Dmax=21mm, -60 °C to +110 °C, intermittent +140 °C, black, 25m
HWPP20-PP-BK 161-64301
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
25 m
Black (BK) HWPP20-PP-BK 161-64301
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Slit cable cover, Dmax=27mm, -60 °C to +110 °C, intermittent +140 °C, black, 25m
HelaWrap Cable Cover - HWPP - black.
Compare
Slit cable cover, Dmax=27mm, -60 °C to +110 °C, intermittent +140 °C, black, 25m
HWPP25-PP-BK 161-64401
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
Add to watchlist
25 pcs.
Black (BK) HWPP25-PP-BK 161-64401
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie not serrated vibration absorbing, 360x6.1mm, ⌀4.7-93.0mm, natural, 50pcs.
Compare
Cable tie not serrated vibration absorbing, 360x6.1mm, ⌀4.7-93.0mm, natural, 50pcs.
KR6/35-PA66HS-NA 121-63555
Compare
Add to watchlist
50 pcs.
Natural (NA) KR6/35-PA66HS-NA 121-63555
Cable tie not serrated vibration absorbing, 210x8.0mm, ⌀8.0-47.0mm, natural, 50pcs.
KR8/21 Cable tie without serration locked by glass fibre pin
Compare
Cable tie not serrated vibration absorbing, 210x8.0mm, ⌀8.0-47.0mm, natural, 50pcs.
KR8/21-PA66HS-NA 121-82155
Compare
Add to watchlist
50 pcs.
Natural (NA) KR8/21-PA66HS-NA 121-82155
Cable tie not serrated vibration absorbing, 426.0x8.0mm, ⌀8.0-105.0mm, natural, 50pcs.
Compare
Cable tie not serrated vibration absorbing, 426.0x8.0mm, ⌀8.0-105.0mm, natural, 50pcs.
KR8/43-PA66HS-NA 121-74359
Compare
Add to watchlist
50 pcs.
Natural (NA) KR8/43-PA66HS-NA 121-74359
Cable tie inside serrated, 530.0x8.9mm, ⌀8.0-150.0mm, black, 25pcs.
Heavy duty T-Series cable ties feature inside serrations to provide a positive hold on wire and cable bundles.
Compare
Cable tie inside serrated, 530.0x8.9mm, ⌀8.0-150.0mm, black, 25pcs.
T150M-PA66W-BK 111-15660
Compare
Add to watchlist
25 pcs.
Black (BK) T150M-PA66W-BK 111-15660
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22.0mm, natural, 1000pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22.0mm, natural, 1000pcs.
T18R-PA66-NA 111-01929
Compare
Add to watchlist
1000 pcs.
Natural (NA) T18R-PA66-NA 111-01929
Cable tie inside serrated, 150x4.6mm, ⌀1.5-35.0mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 150x4.6mm, ⌀1.5-35.0mm, natural, 100pcs.
T50S-PA66-NA 111-05819
Compare
Add to watchlist
100 pcs.
Natural (NA) T50S-PA66-NA 111-05819
Cable tie inside serrated, 150x4.6mm, ⌀1.5-35.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Compare
Cable tie inside serrated, 150x4.6mm, ⌀1.5-35.0mm, black, 100pcs.
T50S-PA66W-BK 111-05860
Compare
Add to watchlist
100 pcs.
Black (BK) T50S-PA66W-BK 111-05860
Cable tie mount for adhesive use, Wmax=4.1mm, ⌀3.1 mm, Adhesive, white, 100pcs.
4-way cable tie entry for more installation options.
Compare
Cable tie mount for adhesive use, Wmax=4.1mm, ⌀3.1 mm, Adhesive, white, 100pcs.
MB3A-PA66-WH 151-28349
Compare
Add to watchlist
100 pcs.
White (WH) MB3A-PA66-WH 151-28349
Cable tie mount for adhesive use, Wmax=8.0mm, ⌀3.2 mm, black, 100pcs.
TY8G1 TY8G1S Black Screw Fixing Cable Tie Mount
Compare
Cable tie mount for adhesive use, Wmax=8.0mm, ⌀3.2 mm, black, 100pcs.
TY8G1S-PA66W-BK 151-11810
Compare
Add to watchlist
100 pcs.
Black (BK) TY8G1S-PA66W-BK 151-11810
RFID cable tie, 869 MHz (UHF), 201x7.9mm, ⌀17.0-50.0mm, red, 50pcs.
MBTRFID – stainless steel RFID cable ties for product identification in harsh environments.
Compare
RFID cable tie, 869 MHz (UHF), 201x7.9mm, ⌀17.0-50.0mm, red, 50pcs.
MBT8HHFRFID-SS316/SP-RD 156-01565
Compare
Add to watchlist
50 pcs.
Red (RD) MBT8HHFRFID-SS316/SP-RD 156-01565
RFID cable tie, 13.56 MHz (HF), 362x7.9mm, ⌀17-102mm, red, 50pcs.
MBTRFID – stainless steel RFID cable ties for product identification in harsh environments.
Compare
RFID cable tie, 13.56 MHz (HF), 362x7.9mm, ⌀17-102mm, red, 50pcs.
MBT14HFCRFID-SS316/SP-RD 111-01586
Compare
Add to watchlist
50 pcs.
Red (RD) MBT14HFCRFID-SS316/SP-RD 111-01586
RFID cable tie, 13.56 MHz (HF), 521x7.9mm, ⌀17-152mm, red, 50pcs.
MBTRFID – stainless steel RFID cable ties for product identification in harsh environments.
Compare
RFID cable tie, 13.56 MHz (HF), 521x7.9mm, ⌀17-152mm, red, 50pcs.
MBT20HFCRFID-SS316/SP-RD 111-01587
Compare
Add to watchlist
50 pcs.
Red (RD) MBT20HFCRFID-SS316/SP-RD 111-01587
RFID cable tie, 13.56 MHz (HF), 681x7.9mm, ⌀17-203mm, red, 50pcs.
MBTRFID – stainless steel RFID cable ties for product identification in harsh environments.
Compare
RFID cable tie, 13.56 MHz (HF), 681x7.9mm, ⌀17-203mm, red, 50pcs.
MBT27HFCRFID-SS316/SP-RD 111-01588
Compare
Add to watchlist
50 pcs.
Red (RD) MBT27HFCRFID-SS316/SP-RD 111-01588
RFID cable tie, 13.56 MHz (HF), 838x7.9mm, ⌀17-254mm, red, 50pcs.
MBTRFID – stainless steel RFID cable ties for product identification in harsh environments.
Compare
RFID cable tie, 13.56 MHz (HF), 838x7.9mm, ⌀17-254mm, red, 50pcs.
MBT33HFCRFID-SS316/SP-RD 111-01589
Compare
Add to watchlist
50 pcs.
Red (RD) MBT33HFCRFID-SS316/SP-RD 111-01589
RFID cable tie, 125 kHz (LF), 200x4.6mm, ⌀1.5-50mm, yellow, 100pcs.
T50RFID – clear identification even under harsh conditions.
Compare
RFID cable tie, 125 kHz (LF), 200x4.6mm, ⌀1.5-50mm, yellow, 100pcs.
T50RFIDCLA-PA66-YE 111-01638
Compare
Add to watchlist
100 pcs.
Yellow (YE) T50RFIDCLA-PA66-YE 111-01638
RFID cable tie, 13.56 MHz (HF), 200x4.6mm, ⌀1.5-50mm, black, 100pcs.
T50RFID W– UV and weather resistant RFID cable ties for outdoor usage.
Compare
RFID cable tie, 13.56 MHz (HF), 200x4.6mm, ⌀1.5-50mm, black, 100pcs.
T50RFIDCHA-PA66-BK 111-01591
Compare
Add to watchlist
100 pcs.
Black (BK) T50RFIDCHA-PA66-BK 111-01591
RFID cable tie, 13.56 MHz (HF), 200x4.6mm, ⌀1.5-50mm, yellow, 100pcs.
Cable tie complete with RFID transponder.
Compare
RFID cable tie, 13.56 MHz (HF), 200x4.6mm, ⌀1.5-50mm, yellow, 100pcs.
T50RFIDCHA-PA66-YE 111-01639
Compare
Add to watchlist
100 pcs.
Yellow (YE) T50RFIDCHA-PA66-YE 111-01639
Facebook  Instagram  X  YouTube  LinkedIn  Corporate Blog 
Contact Us Terms and Conditions Imprint Guidelines and commitments Privacy statement Newsletter Sitemap
Update: 16/08/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.284) | Update: 16/08/2025 | Privacy Settings
Contact