Rezultatov iskanja za "*P-clamp**Ratchet P-Clamps*Inline Ratchet P-Clamps**Alu P-Clamp*" v tej kategoriji / Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Opozorilo: V naši ponudbi ni izdelka, ki bi ustrezal izbranim pogojem. Spodaj so prikazani rezultati vašega iskanja.

Spremenite izbrane pogoje in nato poizkusite znova.

Pogled inženirja

Sustainable

Pogled inženirja

Sustainable

Ponastavi vse

P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 200pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

One-piece ratchet closure allows for easy installation before, during or after final assembly.

Primerjava

RCB180LM8-PA66HIRHSUV/ST/ZN-BK 151-01445

Primerjava

One-piece ratchet closure allows for easy installation before, during or after final assembly.

Primerjava

P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 200pcs.

Primerjava

200 pcs.

Black (BK) RCB180LM8-PA66HIRHSUV/ST/ZN-BK 151-01445

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 200pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCB180MM8-PA66HIRHSUV/ST/ZN-BK 151-01442

Primerjava

Primerjava

P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 200pcs.

Primerjava

200 pcs.

Black (BK) RCB180MM8-PA66HIRHSUV/ST/ZN-BK 151-01442

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 180°, black, 280pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCB180SM12-PA66HIRHSUV/ST/ZN-BK 151-01441

Primerjava

Primerjava

P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 180°, black, 280pcs.

Primerjava

280 pcs.

Black (BK) RCB180SM12-PA66HIRHSUV/ST/ZN-BK 151-01441

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 280pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCB180SM6-PA66HIRHSUV/ST/ZN-BK 151-01645

Primerjava

Primerjava

P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 280pcs.

Primerjava

280 pcs.

Black (BK) RCB180SM6-PA66HIRHSUV/ST/ZN-BK 151-01645

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 280pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCB180SM8-PA66HIRHSUV/ST/ZN-BK 151-01440

Primerjava

Primerjava

P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 280pcs.

Primerjava

280 pcs.

Black (BK) RCB180SM8-PA66HIRHSUV/ST/ZN-BK 151-01440

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 30°, black, 280pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCB30SM8-PA66HIRHSUV/ST/ZN-BK 151-01451

Primerjava

Primerjava

P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 30°, black, 280pcs.

Primerjava

280 pcs.

Black (BK) RCB30SM8-PA66HIRHSUV/ST/ZN-BK 151-01451

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 90°, black, 200pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCB90LM10-PA66HIRHSUV/ST/ZN-BK 151-01461

Primerjava

Primerjava

P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 90°, black, 200pcs.

Primerjava

200 pcs.

Black (BK) RCB90LM10-PA66HIRHSUV/ST/ZN-BK 151-01461

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 90°, black, 200pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCB90LM12-PA66HIRHSUV/ST/ZN-BK 151-01462

Primerjava

Primerjava

P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 90°, black, 200pcs.

Primerjava

200 pcs.

Black (BK) RCB90LM12-PA66HIRHSUV/ST/ZN-BK 151-01462

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 90°, black, 200pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCB90LM8-PA66HIRHSUV/ST/ZN-BK 151-01460

Primerjava

Primerjava

P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 90°, black, 200pcs.

Primerjava

200 pcs.

Black (BK) RCB90LM8-PA66HIRHSUV/ST/ZN-BK 151-01460

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 90°, black, 280pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCB90SM6-PA66HIRHSUV/ST/ZN-BK 151-01651

Primerjava

Primerjava

P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 90°, black, 280pcs.

Primerjava

280 pcs.

Black (BK) RCB90SM6-PA66HIRHSUV/ST/ZN-BK 151-01651

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 200pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

One-piece ratchet closure allows for easy installation before, during or after final assembly.

Primerjava

RCA180LM6-PA66HIRHSUV/ST/ZN-BK 151-01639

Primerjava

One-piece ratchet closure allows for easy installation before, during or after final assembly.

Primerjava

P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 200pcs.

Primerjava

200 pcs.

Black (BK) RCA180LM6-PA66HIRHSUV/ST/ZN-BK 151-01639

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 200pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

One-piece ratchet closure allows for easy installation before, during or after final assembly.

Primerjava

RCA180LM8-PA66HIRHSUV/ST/ZN-BK 151-01422

Primerjava

One-piece ratchet closure allows for easy installation before, during or after final assembly.

Primerjava

P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 200pcs.

Primerjava

200 pcs.

Black (BK) RCA180LM8-PA66HIRHSUV/ST/ZN-BK 151-01422

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 200pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

One-piece ratchet closure allows for easy installation before, during or after final assembly.

Primerjava

RCA180MM6-PA66HIRHSUV/ST/ZN-BK 151-01638

Primerjava

One-piece ratchet closure allows for easy installation before, during or after final assembly.

Primerjava

P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 200pcs.

Primerjava

200 pcs.

Black (BK) RCA180MM6-PA66HIRHSUV/ST/ZN-BK 151-01638

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 200pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

One-piece ratchet closure allows for easy installation before, during or after final assembly.

Primerjava

RCA180MM8-PA66HIRHSUV/ST/ZN-BK 151-01419

Primerjava

One-piece ratchet closure allows for easy installation before, during or after final assembly.

Primerjava

P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 200pcs.

Primerjava

200 pcs.

Black (BK) RCA180MM8-PA66HIRHSUV/ST/ZN-BK 151-01419

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 180°, black, 300pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

RCA180SM10.

Primerjava

RCA180SM10-PA66HIRHSUV/ST/ZN-BK 151-01417

Primerjava

RCA180SM10.

Primerjava

P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 180°, black, 300pcs.

Primerjava

300 pcs.

Black (BK) RCA180SM10-PA66HIRHSUV/ST/ZN-BK 151-01417

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 180°, black, 300pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCA180SM12-PA66HIRHSUV/ST/ZN-BK 151-01418

Primerjava

Primerjava

P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 180°, black, 300pcs.

Primerjava

300 pcs.

Black (BK) RCA180SM12-PA66HIRHSUV/ST/ZN-BK 151-01418

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 300pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCA180SM6-PA66HIRHSUV/ST/ZN-BK 151-01637

Primerjava

Primerjava

P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 300pcs.

Primerjava

300 pcs.

Black (BK) RCA180SM6-PA66HIRHSUV/ST/ZN-BK 151-01637

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 300pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCA180SM8-PA66HIRHSUV/ST/ZN-BK 151-01416

Primerjava

Primerjava

P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 300pcs.

Primerjava

300 pcs.

Black (BK) RCA180SM8-PA66HIRHSUV/ST/ZN-BK 151-01416

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 90°, black, 200pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCA90LM6-PA66HIRHSUV/ST/ZN-BK 151-01644

Primerjava

Primerjava

P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 90°, black, 200pcs.

Primerjava

200 pcs.

Black (BK) RCA90LM6-PA66HIRHSUV/ST/ZN-BK 151-01644

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 90°, black, 200pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCA90LM8-PA66HIRHSUV/ST/ZN-BK 151-01437

Primerjava

Primerjava

P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 90°, black, 200pcs.

Primerjava

200 pcs.

Black (BK) RCA90LM8-PA66HIRHSUV/ST/ZN-BK 151-01437

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 90°, black, 300pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCA90SM6-PA66HIRHSUV/ST/ZN-BK 151-01643

Primerjava

Primerjava

P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 90°, black, 300pcs.

Primerjava

300 pcs.

Black (BK) RCA90SM6-PA66HIRHSUV/ST/ZN-BK 151-01643

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀5.6 mm, 180°, black, 160pcs.

Primerjava

RCCHANGER-PA66HIRHSUV/ZN-BK 151-03057

Primerjava

Primerjava

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀5.6 mm, 180°, black, 160pcs.

Primerjava

160 pcs.

Black (BK) RCCHANGER-PA66HIRHSUV/ZN-BK 151-03057

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 90°, black, 160pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCC90SM8-PA66HIRHSUV/ST/ZN-BK 151-01492

Primerjava

Primerjava

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 90°, black, 160pcs.

Primerjava

160 pcs.

Black (BK) RCC90SM8-PA66HIRHSUV/ST/ZN-BK 151-01492

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 180°, black, 160pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

RCA180SM10.

Primerjava

RCC180SM10-PA66HIRHSUV/ST/ZN-BK 151-01475

Primerjava

RCA180SM10.

Primerjava

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 180°, black, 160pcs.

Primerjava

160 pcs.

Black (BK) RCC180SM10-PA66HIRHSUV/ST/ZN-BK 151-01475

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 180°, black, 140pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCC180LM10-PA66HIRHSUV/ST/ZN-BK 151-01481

Primerjava

Primerjava

P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 180°, black, 140pcs.

Primerjava

140 pcs.

Black (BK) RCC180LM10-PA66HIRHSUV/ST/ZN-BK 151-01481

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 180°, black, 140pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCC180LM12-PA66HIRHSUV/ST/ZN-BK 151-01482

Primerjava

Primerjava

P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 180°, black, 140pcs.

Primerjava

140 pcs.

Black (BK) RCC180LM12-PA66HIRHSUV/ST/ZN-BK 151-01482

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 140pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCC180LM6-PA66HIRHSUV/ST/ZN-BK 151-01655

Primerjava

Primerjava

P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 140pcs.

Primerjava

140 pcs.

Black (BK) RCC180LM6-PA66HIRHSUV/ST/ZN-BK 151-01655

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 140pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCC180LM8-PA66HIRHSUV/ST/ZN-BK 151-01480

Primerjava

Primerjava

P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 140pcs.

Primerjava

140 pcs.

Black (BK) RCC180LM8-PA66HIRHSUV/ST/ZN-BK 151-01480

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp medium, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 140pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCC180MM6-PA66HIRHSUV/ST/ZN-BK 151-01654

Primerjava

Primerjava

P-clamp medium, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 140pcs.

Primerjava

140 pcs.

Black (BK) RCC180MM6-PA66HIRHSUV/ST/ZN-BK 151-01654

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp medium, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 140pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCC180MM8-PA66HIRHSUV/ST/ZN-BK 151-01477

Primerjava

Primerjava

P-clamp medium, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 140pcs.

Primerjava

140 pcs.

Black (BK) RCC180MM8-PA66HIRHSUV/ST/ZN-BK 151-01477

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 180°, black, 160pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCC180SM12-PA66HIRHSUV/ST/ZN-BK 151-01476

Primerjava

Primerjava

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 180°, black, 160pcs.

Primerjava

160 pcs.

Black (BK) RCC180SM12-PA66HIRHSUV/ST/ZN-BK 151-01476

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 160pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCC180SM6-PA66HIRHSUV/ST/ZN-BK 151-01653

Primerjava

Primerjava

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 160pcs.

Primerjava

160 pcs.

Black (BK) RCC180SM6-PA66HIRHSUV/ST/ZN-BK 151-01653

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 160pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCC180SM8-PA66HIRHSUV/ST/ZN-BK 151-01474

Primerjava

Primerjava

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 160pcs.

Primerjava

160 pcs.

Black (BK) RCC180SM8-PA66HIRHSUV/ST/ZN-BK 151-01474

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 30°, black, 160pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCC30SM8-PA66HIRHSUV/ST/ZN-BK 151-01486

Primerjava

Primerjava

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 30°, black, 160pcs.

Primerjava

160 pcs.

Black (BK) RCC30SM8-PA66HIRHSUV/ST/ZN-BK 151-01486

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 90°, black, 140pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCC90LM10-PA66HIRHSUV/ST/ZN-BK 151-01496

Primerjava

Primerjava

P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 90°, black, 140pcs.

Primerjava

140 pcs.

Black (BK) RCC90LM10-PA66HIRHSUV/ST/ZN-BK 151-01496

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 90°, black, 140pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCC90LM6-PA66HIRHSUV/ST/ZN-BK 151-01660

Primerjava

Primerjava

P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 90°, black, 140pcs.

Primerjava

140 pcs.

Black (BK) RCC90LM6-PA66HIRHSUV/ST/ZN-BK 151-01660

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 90°, black, 140pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCC90LM8-PA66HIRHSUV/ST/ZN-BK 151-01495

Primerjava

Primerjava

P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 90°, black, 140pcs.

Primerjava

140 pcs.

Black (BK) RCC90LM8-PA66HIRHSUV/ST/ZN-BK 151-01495

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 90°, black, 160pcs.

Primerjava

RCC90SM10-PA66HIRHSUV/ST/ZN-BK 151-01493

Primerjava

Primerjava

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 90°, black, 160pcs.

Primerjava

160 pcs.

Black (BK) RCC90SM10-PA66HIRHSUV/ST/ZN-BK 151-01493

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 90°, black, 160pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCC90SM6-PA66HIRHSUV/ST/ZN-BK 151-01659

Primerjava

Primerjava

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 90°, black, 160pcs.

Primerjava

160 pcs.

Black (BK) RCC90SM6-PA66HIRHSUV/ST/ZN-BK 151-01659

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 180°, black, 160pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

RCD180SM10.

Primerjava

RCD180SM10-PA66HIRHSUV/ST/ZN-BK 151-01501

Primerjava

RCD180SM10.

Primerjava

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 180°, black, 160pcs.

Primerjava

160 pcs.

Black (BK) RCD180SM10-PA66HIRHSUV/ST/ZN-BK 151-01501

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 180°, black, 140pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

RCD180MM10.

Primerjava

RCD180MM10-PA66HIRHSUV/ST/ZN-BK 151-01504

Primerjava

RCD180MM10.

Primerjava

P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 180°, black, 140pcs.

Primerjava

140 pcs.

Black (BK) RCD180MM10-PA66HIRHSUV/ST/ZN-BK 151-01504

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 160pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCD180SM6-PA66HIRHSUV/ST/ZN-BK 151-01661

Primerjava

Primerjava

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 160pcs.

Primerjava

160 pcs.

Black (BK) RCD180SM6-PA66HIRHSUV/ST/ZN-BK 151-01661

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 160pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCD180SM8-PA66HIRHSUV/ST/ZN-BK 151-01499

Primerjava

Primerjava

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 160pcs.

Primerjava

160 pcs.

Black (BK) RCD180SM8-PA66HIRHSUV/ST/ZN-BK 151-01499

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 90°, black, 140pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCD90LM8-PA66HIRHSUV/ST/ZN-BK 151-01521

Primerjava

Primerjava

P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 90°, black, 140pcs.

Primerjava

140 pcs.

Black (BK) RCD90LM8-PA66HIRHSUV/ST/ZN-BK 151-01521

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 90°, black, 160pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCD90SM10-PA66HIRHSUV/ST/ZN-BK 151-01519

Primerjava

Primerjava

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 90°, black, 160pcs.

Primerjava

160 pcs.

Black (BK) RCD90SM10-PA66HIRHSUV/ST/ZN-BK 151-01519

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 90°, black, 160pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Primerjava

RCD90SM8-PA66HIRHSUV/ST/ZN-BK 151-01518

Primerjava

Primerjava

P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 90°, black, 160pcs.

Primerjava

160 pcs.

Black (BK) RCD90SM8-PA66HIRHSUV/ST/ZN-BK 151-01518

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=63.0mm, Dmax=80.0mm, ⌀8.31 mm, 180°, black, 90pcs.

Primerjava

RCF180SM8SS-PA66HIRHSUV/SS304-BK 151-03122

Primerjava

Primerjava

P-clamp short, Dmin=63.0mm, Dmax=80.0mm, ⌀8.31 mm, 180°, black, 90pcs.

Primerjava

90 pcs.

Black (BK) RCF180SM8SS-PA66HIRHSUV/SS304-BK 151-03122

Cable clip, Dmin=6.10mm, Dmax=13.72mm

Pre-assembled, reuseable In-Line Ratchet P-Clamp with adhesive base.

Primerjava

IRCAMB5A-PA66HIRHSUV-BK 156-02624

Primerjava

Pre-assembled, reuseable In-Line Ratchet P-Clamp with adhesive base.

Primerjava

Cable clip, Dmin=6.10mm, Dmax=13.72mm

Primerjava

250

Black (BK) IRCAMB5A-PA66HIRHSUV-BK 156-02624

Cable clip, Dmin=6.10mm, Dmax=13.72mm

Pre-assembled, reuseable In-Line Ratchet P-Clamp with adhesive base.

Primerjava

IRCAMB5A-PA66HIRHSUV-BK 156-02722

Primerjava

Pre-assembled, reuseable In-Line Ratchet P-Clamp with adhesive base.

Primerjava

Cable clip, Dmin=6.10mm, Dmax=13.72mm

Primerjava

25

Black (BK) IRCAMB5A-PA66HIRHSUV-BK 156-02722

Cable clip for adhesive use/with pipe/tube holder, Dmin=12.70mm, Dmax=19.56mm

The self adhesive mount of Ratchet -P-Clamp series creates an incredible bond with mounting surface.

Primerjava

IRCBMB5A-PA66HIRHSUV-BK 156-02723

Primerjava

The self adhesive mount of Ratchet -P-Clamp series creates an incredible bond with mounting surface.

Primerjava

Cable clip for adhesive use/with pipe/tube holder, Dmin=12.70mm, Dmax=19.56mm

Primerjava

25

Black (BK) IRCBMB5A-PA66HIRHSUV-BK 156-02723

Cable clip, Dmin=19.30mm, Dmax=36.01mm

Primerjava

IRCCMB5A-PA66HIRHSUV-BK 156-02644

Primerjava

Primerjava

Cable clip, Dmin=19.30mm, Dmax=36.01mm

Primerjava

250

Black (BK) IRCCMB5A-PA66HIRHSUV-BK 156-02644

Cable clip, Dmin=19.30mm, Dmax=36.01mm

Primerjava

IRCCMB5A-PA66HIRHSUV-BK 156-02724

Primerjava

Primerjava

Cable clip, Dmin=19.30mm, Dmax=36.01mm

Primerjava

25

Black (BK) IRCCMB5A-PA66HIRHSUV-BK 156-02724

Cable clip, Dmin=36.0mm, Dmax=51.0mm

3M™ VHB™ adhesive on base creates an incredible bond with mounting surface.

Primerjava

IRCDMB5A-PA66HIRHSUV-BK 156-02654

Primerjava

3M™ VHB™ adhesive on base creates an incredible bond with mounting surface.

Primerjava

Cable clip, Dmin=36.0mm, Dmax=51.0mm

Primerjava

200

Black (BK) IRCDMB5A-PA66HIRHSUV-BK 156-02654

Cable clip, Dmin=36.01mm, Dmax=50.8mm

3M™ VHB™ adhesive on base creates an incredible bond with mounting surface.

Primerjava

IRCDMB5A-PA66HIRHSUV-BK 156-02725

Primerjava

3M™ VHB™ adhesive on base creates an incredible bond with mounting surface.

Primerjava

Cable clip, Dmin=36.01mm, Dmax=50.8mm

Primerjava

25

Black (BK) IRCDMB5A-PA66HIRHSUV-BK 156-02725

P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀5.6 mm, 180°, black, 280pcs.

Primerjava

RCBHANGER-PA66HIRHSUV/ZN-BK 151-02875

Primerjava

Primerjava

P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀5.6 mm, 180°, black, 280pcs.

Primerjava

280 pcs.

Black (BK) RCBHANGER-PA66HIRHSUV/ZN-BK 151-02875

Cable clip, T=0.6 - 9.0mm, ⌀6.5 mm, Dmin=12.70mm, Dmax=19.56mm

High-performing round fir trees mean no additional fastener is needed for mounting.

Primerjava

IRCBFT6.5LG-PA66HIRHSUV-BK 156-02707

Primerjava

High-performing round fir trees mean no additional fastener is needed for mounting.

Primerjava

Cable clip, T=0.6 - 9.0mm, ⌀6.5 mm, Dmin=12.70mm, Dmax=19.56mm

Primerjava

25

Black (BK) IRCBFT6.5LG-PA66HIRHSUV-BK 156-02707

Cable clip for adhesive use/with pipe/tube holder, Dmin=12.70mm, Dmax=19.56mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

The self adhesive mount of Ratchet -P-Clamp series creates an incredible bond with mounting surface.

Primerjava

IRCBMB5A-PA66HIRHSUV-BK 156-02634

Primerjava

The self adhesive mount of Ratchet -P-Clamp series creates an incredible bond with mounting surface.

Primerjava

Cable clip for adhesive use/with pipe/tube holder, Dmin=12.70mm, Dmax=19.56mm

Primerjava

250 pcs.

Black (BK) IRCBMB5A-PA66HIRHSUV-BK 156-02634

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip, T=0.6 - 6.75mm, ⌀7.0 x 12.0 mm, Dmin=12.70mm, Dmax=19.56mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

High-performing oval fir trees ensure anti-twist protection.

Primerjava

IRCBFTOVAL-PA66HIRHSUV-BK 156-02628

Primerjava

High-performing oval fir trees ensure anti-twist protection.

Primerjava

Cable clip, T=0.6 - 6.75mm, ⌀7.0 x 12.0 mm, Dmin=12.70mm, Dmax=19.56mm

Primerjava

250 pcs.

Black (BK) IRCBFTOVAL-PA66HIRHSUV-BK 156-02628

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip, T=0.6 - 6.75mm, ⌀7.0 x 12.0 mm, Dmin=36.01mm, Dmax=50.8mm

High-performing oval fir trees ensure anti-twist protection.

Primerjava

IRCDFTOVAL-PA66HIRHSUV-BK 156-02648

Primerjava

High-performing oval fir trees ensure anti-twist protection.

Primerjava

Cable clip, T=0.6 - 6.75mm, ⌀7.0 x 12.0 mm, Dmin=36.01mm, Dmax=50.8mm

Primerjava

200

Black (BK) IRCDFTOVAL-PA66HIRHSUV-BK 156-02648

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Primerjava

ALU12-AL-NA 211-10120

Primerjava

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Primerjava

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.

Primerjava

100 pcs.

Natural (NA) ALU12-AL-NA 211-10120

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Primerjava

ALU13-AL-NA 211-10130

Primerjava

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Primerjava

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.

Primerjava

100 pcs.

Natural (NA) ALU13-AL-NA 211-10130

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Primerjava

ALU11-AL-NA 211-10110

Primerjava

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Primerjava

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.

Primerjava

100 pcs.

Natural (NA) ALU11-AL-NA 211-10110

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU17C-AL/CR-BK 211-15170

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) ALU17C-AL/CR-BK 211-15170

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU19C-AL/CR-BK 211-15190

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.

Primerjava

50 pcs.

Black (BK) ALU19C-AL/CR-BK 211-15190

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

ALU23C P-Clamp with chloroprene insert.

Primerjava

ALU23C-AL/CR-BK 211-15230

Primerjava

ALU23C P-Clamp with chloroprene insert.

Primerjava

P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.

Primerjava

50 pcs.

Black (BK) ALU23C-AL/CR-BK 211-15230

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU24C-AL/CR-BK 211-15240

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.

Primerjava

50 pcs.

Black (BK) ALU24C-AL/CR-BK 211-15240

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU25C-AL/CR-BK 211-15250

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.

Primerjava

50 pcs.

Black (BK) ALU25C-AL/CR-BK 211-15250

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU26C-AL/CR-BK 211-15260

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.

Primerjava

50 pcs.

Black (BK) ALU26C-AL/CR-BK 211-15260

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU28C-AL/CR-BK 211-15280

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.

Primerjava

50 pcs.

Black (BK) ALU28C-AL/CR-BK 211-15280

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU29C-AL/CR-BK 211-15290

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.

Primerjava

50 pcs.

Black (BK) ALU29C-AL/CR-BK 211-15290

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU30C-AL/CR-BK 211-15300

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.

Primerjava

50 pcs.

Black (BK) ALU30C-AL/CR-BK 211-15300

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU34C-AL/CR-BK 211-15340

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.

Primerjava

50 pcs.

Black (BK) ALU34C-AL/CR-BK 211-15340

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Primerjava

ALU8-AL-NA 211-10080

Primerjava

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Primerjava

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.

Primerjava

100 pcs.

Natural (NA) ALU8-AL-NA 211-10080

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Primerjava

ALU10-AL-NA 211-10100

Primerjava

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Primerjava

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.

Primerjava

100 pcs.

Natural (NA) ALU10-AL-NA 211-10100

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU11C-AL/CR-BK 211-15110

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) ALU11C-AL/CR-BK 211-15110

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU13C-AL/CR-BK 211-15130

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) ALU13C-AL/CR-BK 211-15130

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU14C-AL/CR-BK 211-15140

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) ALU14C-AL/CR-BK 211-15140

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU16C-AL/CR-BK 211-15160

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) ALU16C-AL/CR-BK 211-15160

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU18C-AL/CR-BK 211-15180

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) ALU18C-AL/CR-BK 211-15180

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU20C-AL/CR-BK 211-15200

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.

Primerjava

50 pcs.

Black (BK) ALU20C-AL/CR-BK 211-15200

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU22C-AL/CR-BK 211-15220

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.

Primerjava

50 pcs.

Black (BK) ALU22C-AL/CR-BK 211-15220

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Primerjava

ALU4-AL-NA 211-10040

Primerjava

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Primerjava

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.

Primerjava

100 pcs.

Natural (NA) ALU4-AL-NA 211-10040

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU4C-AL/CR-BK 211-15040

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) ALU4C-AL/CR-BK 211-15040

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Primerjava

ALU5-AL-NA 211-10050

Primerjava

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Primerjava

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.

Primerjava

100 pcs.

Natural (NA) ALU5-AL-NA 211-10050

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU5C-AL/CR-BK 211-15050

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) ALU5C-AL/CR-BK 211-15050

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Primerjava

ALU7-AL-NA 211-10070

Primerjava

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Primerjava

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.

Primerjava

100 pcs.

Natural (NA) ALU7-AL-NA 211-10070

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Primerjava

ALU6-AL-NA 211-10060

Primerjava

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Primerjava

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.

Primerjava

100 pcs.

Natural (NA) ALU6-AL-NA 211-10060

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU12C-AL/CR-BK 211-15120

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) ALU12C-AL/CR-BK 211-15120

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU15C-AL/CR-BK 211-15150

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) ALU15C-AL/CR-BK 211-15150

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU6C-AL/CR-BK 211-15060

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) ALU6C-AL/CR-BK 211-15060

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU7C-AL/CR-BK 211-15070

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) ALU7C-AL/CR-BK 211-15070

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU8C-AL/CR-BK 211-15080

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) ALU8C-AL/CR-BK 211-15080

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU9C-AL/CR-BK 211-15090

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) ALU9C-AL/CR-BK 211-15090

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

ALU10C-CR/AL-BK 211-15100

Primerjava

P-Clips (Alu) with Rubber Insert for vibration resistance

Primerjava

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.

Primerjava

100 pcs.

Black (BK) ALU10C-CR/AL-BK 211-15100

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Ratchet O-Clamp

Primerjava

ROC18.5-22.5SLOT17-PA66HIRHSUV-BK 151-04349

Primerjava

Primerjava

Ratchet O-Clamp

Primerjava

1000 pcs.

Black (BK) ROC18.5-22.5SLOT17-PA66HIRHSUV-BK 151-04349

Ratchet O-Clamp

ROC series is designed to suit multiple pipe diameters, the mechanism delivers a firm, reliable hold every time.

Primerjava

ROC18.5-22.5FT6.5-PA66HIRHSUV-BK 151-04351

Primerjava

ROC series is designed to suit multiple pipe diameters, the mechanism delivers a firm, reliable hold every time.

Primerjava

Ratchet O-Clamp

Primerjava

1000

Black (BK) ROC18.5-22.5FT6.5-PA66HIRHSUV-BK 151-04351

Ratchet O-Clamp

Primerjava

ROC18.5-22.5CLIP17-PA66HIRHSUV-BK 151-04350

Primerjava

Primerjava

Ratchet O-Clamp

Primerjava

1000 pcs.

Black (BK) ROC18.5-22.5CLIP17-PA66HIRHSUV-BK 151-04350

Ratchet O-Clamp

Primerjava

ROC18.5-22.5FTOVAL-PA66HIRHSUV-BK 151-04352

Primerjava

Primerjava

Ratchet O-Clamp

Primerjava

1000 pcs.

Black (BK) ROC18.5-22.5FTOVAL-PA66HIRHSUV-BK 151-04352

Cable clip for hole (oval), T=0.6 - 5.0mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=12.2mm, Dmax=18.2mm

Fixing element for parallel routing of two harnesses or tubes (12.2 - 18.0mm).

Primerjava

DHC12.2-18.2FTOVAL-PA66HIRHS-BK 151-02965

Primerjava

Fixing element for parallel routing of two harnesses or tubes (12.2 - 18.0mm).

Primerjava

Cable clip for hole (oval), T=0.6 - 5.0mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=12.2mm, Dmax=18.2mm

Primerjava

250 pcs.

Black (BK) DHC12.2-18.2FTOVAL-PA66HIRHS-BK 151-02965

Cable clip for hole (oval)/for cable bundles, T=0.6 - 5.0mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=12.2mm, Dmax=18.2mm

Fixing element for parallel routing of two harnesses or tubes (12.2 - 18.0mm).

Primerjava

DHC12.2-18.2FTOVAL-PA46-GY 151-02966

Primerjava

Fixing element for parallel routing of two harnesses or tubes (12.2 - 18.0mm).

Primerjava

Cable clip for hole (oval)/for cable bundles, T=0.6 - 5.0mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=12.2mm, Dmax=18.2mm

Primerjava

250 pcs.

Grey (GY) DHC12.2-18.2FTOVAL-PA46-GY 151-02966

Rezultatov iskanja za "*P-clamp**Ratchet P-Clamps*Inline Ratchet P-Clamps**Alu P-Clamp*" v tej kategoriji / Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Slovenia

Izjava o zasebnosti

Družbeni mediji

© HellermannTyton 2026 (v4.311.8) | Update: 28/06/2026 | Nastavitve zasebnosti

Iskanje prodajalca Kontakt

‹ › ×