Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
26/10/2025

Rezultatov iskanja za "D-Clip Series" v tej kategoriji / Clips, Clamps and Plugs

Cable clips are used to secure cables and wires to surfaces such as desks and walls. Clamps are larger than clips and designed to hold multiple cables and wires together. Connector Clips are used to connect electrical cables and wires to electrical or wire connectors. Blind plugs are used to close holes. Clips, clamps and plugs all come in various shapes, sizes and materials. As different industries have different needs, clips and clamps come with all sorts of features. Some are closed others are open or can be reopened - for maintenance, subsequent installations or exchanges for example.

Opozorilo:  V naši ponudbi ni izdelka, ki bi ustrezal izbranim pogojem.  Spodaj so prikazani rezultati vašega iskanja.

Spremenite izbrane pogoje in nato poizkusite znova.

609 najdeni proizvodi
Ponastavi vse
Cable clip for hole (round), ⌀4.8 mm
C3-N66-BK.
Primerjava
Cable clip for hole (round), ⌀4.8 mm
C2-PA6HIR-BK 201-10020
Primerjava
Ne pozabite
100 pcs.
Black (BK) C2-PA6HIR-BK 201-10020
Cable clip for hole (round)
R1 protective strap to hold wires down effortlessly.
Primerjava
Cable clip for hole (round)
R3-PVC-BK 201-20030
Primerjava
Ne pozabite
500 pcs.
Black (BK) R3-PVC-BK 201-20030
Plastic hose clamp, ⌀18.1-19.9mm, natural, 500pcs.
Designed for quick, ratcheted installation and can be released and reused.
Primerjava
Plastic hose clamp, ⌀18.1-19.9mm, natural, 500pcs.
SNP14(E)-POM-NA 191-10149
Primerjava
Ne pozabite
500 pcs.
Natural (NA) SNP14(E)-POM-NA 191-10149
Plastic hose clamp, ⌀19.3-21.5mm, natural, 500pcs.
Designed for quick, ratcheted installation and can be released and reused.
Primerjava
Plastic hose clamp, ⌀19.3-21.5mm, natural, 500pcs.
SNP16-POM-NA 191-10169
Primerjava
Ne pozabite
500 pcs.
Natural (NA) SNP16-POM-NA 191-10169
Plastic hose clamp, ⌀19.1-21.7mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Primerjava
Plastic hose clamp, ⌀19.1-21.7mm, black, 100pcs.
SNP16-PA66GF13-BK 192-10160
Primerjava
Ne pozabite
100 pcs.
Black (BK) SNP16-PA66GF13-BK 192-10160
Plastic hose clamp, ⌀6.0-6.5mm, white, 100pcs.
Completely reusable - will not rust or corrode.
Primerjava
Plastic hose clamp, ⌀6.0-6.5mm, white, 100pcs.
SNP1-POM-WH 190-00022
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
White (WH) SNP1-POM-WH 190-00022
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Plastic hose clamp, ⌀25.3-27.3mm, natural, 500pcs.
Designed for quick, ratcheted installation and can be released and reused.
Primerjava
Plastic hose clamp, ⌀25.3-27.3mm, natural, 500pcs.
SNP22(E)-POM-NA 191-10229
Primerjava
Ne pozabite
500 pcs.
Natural (NA) SNP22(E)-POM-NA 191-10229
Plastic hose clamp, ⌀23.7-27.4mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Primerjava
Plastic hose clamp, ⌀23.7-27.4mm, black, 100pcs.
SNP22-PA66GF13-BK 192-10220
Primerjava
Ne pozabite
100 pcs.
Black (BK) SNP22-PA66GF13-BK 192-10220
Plastic hose clamp, ⌀25.8-29.2mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Primerjava
Plastic hose clamp, ⌀25.8-29.2mm, black, 100pcs.
SNP24-PA66GF13-BK 192-10240
Primerjava
Ne pozabite
100 pcs.
Black (BK) SNP24-PA66GF13-BK 192-10240
Plastic hose clamp, ⌀12.0-13.7mm, natural, 500pcs.
SNP - Snapper Hose Clips range.
Primerjava
Plastic hose clamp, ⌀12.0-13.7mm, natural, 500pcs.
SNP6(E)-POM-NA 191-10069
Primerjava
Ne pozabite
500 pcs.
Natural (NA) SNP6(E)-POM-NA 191-10069
Plastic hose clamp, ⌀11.4-13.7mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Primerjava
Plastic hose clamp, ⌀11.4-13.7mm, black, 100pcs.
SNP7-PA66GF13-BK 192-10070
Primerjava
Ne pozabite
100 pcs.
Black (BK) SNP7-PA66GF13-BK 192-10070
Connector clip for edge, EWCAP-005-11, black, 500pcs.
Primerjava
Connector clip for edge, EWCAP-005-11, black, 500pcs.
EC43-PA66HIRHS-BK 151-00430
Primerjava
Ne pozabite
500 pcs.
Black (BK) EC43-PA66HIRHS-BK 151-00430
Connector clip, EWCAP-005-7, black, 5000pcs.
Primerjava
Connector clip, EWCAP-005-7, black, 5000pcs.
EC54-PA66HIRHSUV-BK 151-01042
Primerjava
Ne pozabite
5000 pcs.
Black (BK) EC54-PA66HIRHSUV-BK 151-01042
Bundling clip for edge, L=50.0mm, SO=17.25mm, black, 5000pcs.
Tape bar provides a convenient surface for securing a bundle using a cable tie or tape.
Primerjava
Bundling clip for edge, L=50.0mm, SO=17.25mm, black, 5000pcs.
EC48-PA66HIRHSUV-BK 151-01206
Primerjava
Ne pozabite
5000 pcs.
Black (BK) EC48-PA66HIRHSUV-BK 151-01206
Bundling clip for hole (round), L=55.0mm, black, 500pcs.
Primerjava
Bundling clip for hole (round), L=55.0mm, black, 500pcs.
BCSFT6.5 16-3MD-PA66HIRHS-BK 155-11601
Primerjava
Ne pozabite
500 pcs.
Black (BK) BCSFT6.5 16-3MD-PA66HIRHS-BK 155-11601
Bundling clip for hole (round), L=27.3mm, natural, 20000pcs.
BCOWFT6M
Primerjava
Bundling clip for hole (round), L=27.3mm, natural, 20000pcs.
BCOWFT6M-PA66HIRHS-NA 151-02227
Primerjava
Ne pozabite
20000 pcs.
Natural (NA) BCOWFT6M-PA66HIRHS-NA 151-02227
Plastic hose clamp, ⌀13.1-15.0mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Primerjava
Plastic hose clamp, ⌀13.1-15.0mm, black, 100pcs.
SNP8-PA66GF13-BK 192-10080
Primerjava
Ne pozabite
100 pcs.
Black (BK) SNP8-PA66GF13-BK 192-10080
Cable clip, T=0.6 - 6.75mm, ⌀7.0 x 12.0 mm, Dmin=36.01mm, Dmax=50.8mm
High-performing oval fir trees ensure anti-twist protection.
Primerjava
Cable clip, T=0.6 - 6.75mm, ⌀7.0 x 12.0 mm, Dmin=36.01mm, Dmax=50.8mm
IRCDFTOVAL-PA66HIRHSUV-BK 156-02648
Primerjava
Ne pozabite
200
Black (BK) IRCDFTOVAL-PA66HIRHSUV-BK 156-02648
Connector clip for connector/for hole (oval), black, 4000pcs.
Connector clip with fir tree includes clamping rails to provide full circumferential compression around bundles.
Primerjava
Connector clip for connector/for hole (oval), black, 4000pcs.
CC12-PA66HIRHSUV-BK 151-01136
Primerjava
Ne pozabite
4000 pcs.
Black (BK) CC12-PA66HIRHSUV-BK 151-01136
Connector clip for hole (oval), black, 4000pcs.
Connector clip designed to meet USCAR EWCAP -005-11 clip slot specifications.
Primerjava
Connector clip for hole (oval), black, 4000pcs.
CCOVAL5-PA66HIRHSUV-BK 151-01286
Primerjava
Ne pozabite
4000 pcs.
Black (BK) CCOVAL5-PA66HIRHSUV-BK 151-01286
Corrugated tube clip for hole (oval), nom⌀21.0mm, black, 100pcs.
Fixing element for convoluted tubes 22 mm with arrow head for oval holes 6.2 x 12.2 mm.
Primerjava
Corrugated tube clip for hole (oval), nom⌀21.0mm, black, 100pcs.
RCC D21-PA66HIRHS-BK 150-92300
Primerjava
Ne pozabite
100 pcs.
Black (BK) RCC D21-PA66HIRHS-BK 150-92300
Corrugated tube clip for hole (oval), nom⌀24.0mm, black, 100pcs.
Simple and secure installation of pipes or hoses to panels.
Primerjava
Corrugated tube clip for hole (oval), nom⌀24.0mm, black, 100pcs.
RCC D24-PA66HIRHS-BK 151-02266
Primerjava
Ne pozabite
100 pcs.
Black (BK) RCC D24-PA66HIRHS-BK 151-02266
Cable clip for stud, Dmin=27.0mm, Dmax=36.0mm
Clips can be connected to each other to create a chain of cable harnesses.
Primerjava
Cable clip for stud, Dmin=27.0mm, Dmax=36.0mm
IAHC4T-PA66HIRHS-BK 151-00207
Primerjava
Ne pozabite
1000 pcs.
Black (BK) IAHC4T-PA66HIRHS-BK 151-00207
Cable clip for stud, ⌀6.35 mm, Dmin=12.5mm, Dmax=13.5mm, ⌀5.0 mm
Clips interlock to expand installation options.
Primerjava
Cable clip for stud, ⌀6.35 mm, Dmin=12.5mm, Dmax=13.5mm, ⌀5.0 mm
IPC13P-PA66-BK 151-14132
Primerjava
Ne pozabite
100 pcs.
Black (BK) IPC13P-PA66-BK 151-14132
Cable clip for stud, Dmin=21.0mm, Dmax=25.0mm, ⌀5.0 mm
Clips interlock to expand installation options.
Primerjava
Cable clip for stud, Dmin=21.0mm, Dmax=25.0mm, ⌀5.0 mm
IPC23P-PA66-BK 151-00869
Primerjava
Ne pozabite
100 pcs.
Black (BK) IPC23P-PA66-BK 151-00869
Cable clip for edge, T=1.0 - 3.0mm, Dmin=15mm, Dmax=22mm
EdgeClip cable and tube clips are suitable for the low-vibration routing of cables and tubes with larger bundle diameters.
Primerjava
Cable clip for edge, T=1.0 - 3.0mm, Dmin=15mm, Dmax=22mm
EC27-PA66HIRHS-BK 151-00161
Primerjava
Ne pozabite
500 pcs.
Black (BK) EC27-PA66HIRHS-BK 151-00161
Cable clip for hole (round), ⌀4.8 mm
C3-N66-BK.
Primerjava
Cable clip for hole (round), ⌀4.8 mm
C1-PA6HIR-BK 201-10010
Primerjava
Ne pozabite
100 pcs.
Black (BK) C1-PA6HIR-BK 201-10010
Cable clip for hole (round), ⌀4.8 mm
C3-N66-BK.
Primerjava
Cable clip for hole (round), ⌀4.8 mm
C3-PA6HIR-BK 201-10030
Primerjava
Ne pozabite
100 pcs.
Black (BK) C3-PA6HIR-BK 201-10030
Cable clip for hole (round), Dmin=1.0mm
R1 protective strap to hold wires down effortlessly.
Primerjava
Cable clip for hole (round), Dmin=1.0mm
R1-PVC-BK 201-20010
Primerjava
Ne pozabite
500 pcs.
Black (BK) R1-PVC-BK 201-20010
Cable clip for hole (round)
R1 protective strap to hold wires down effortlessly.
Primerjava
Cable clip for hole (round)
R2-PVC-BK 201-20020
Primerjava
Ne pozabite
500 pcs.
Black (BK) R2-PVC-BK 201-20020
Cable clip for hole (round), ⌀5.0 mm, Dmin=4.5mm, Dmax=5.7mm
Klam-Klips KK1 - 4.
Primerjava
Cable clip for hole (round), ⌀5.0 mm, Dmin=4.5mm, Dmax=5.7mm
KK1-PA6HIR-BK 234-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
500 pcs.
Black (BK) KK1-PA6HIR-BK 234-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for hole (round), ⌀5.0 mm, Dmin=6.5mm, Dmax=7.7mm
Klam-Klips KK1 - 4.
Primerjava
Cable clip for hole (round), ⌀5.0 mm, Dmin=6.5mm, Dmax=7.7mm
KK3-PA6HIR-BK 234-10300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
500 pcs.
Black (BK) KK3-PA6HIR-BK 234-10300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Primerjava
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.
ALU12-AL-NA 211-10120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) ALU12-AL-NA 211-10120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Primerjava
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.
ALU13-AL-NA 211-10130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) ALU13-AL-NA 211-10130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Plastic hose clamp, ⌀14.5-16.6mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Primerjava
Plastic hose clamp, ⌀14.5-16.6mm, black, 100pcs.
SNP10-PA66HIRHSGF15-BK 192-10100
Primerjava
Ne pozabite
100 pcs.
Black (BK) SNP10-PA66HIRHSGF15-BK 192-10100
Plastic hose clamp, ⌀16.8-18.4mm, natural, 500pcs.
Designed for quick, ratcheted installation and can be released and reused.
Primerjava
Plastic hose clamp, ⌀16.8-18.4mm, natural, 500pcs.
SNP12(E)-POM-NA 191-10129
Primerjava
Ne pozabite
500 pcs.
Natural (NA) SNP12(E)-POM-NA 191-10129
Plastic hose clamp, ⌀6.0-6.8mm, black, 100pcs.
Completely reusable - will not rust or corrode.
Primerjava
Plastic hose clamp, ⌀6.0-6.8mm, black, 100pcs.
SNP1-PA66GF13-BK 192-10010
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) SNP1-PA66GF13-BK 192-10010
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Plastic hose clamp, ⌀8.7-10.0mm, natural, 500pcs.
SNP - Snapper Hose Clips range.
Primerjava
Plastic hose clamp, ⌀8.7-10.0mm, natural, 500pcs.
SNP2(E)-POM-NA 191-10029
Primerjava
Ne pozabite
500 pcs.
Natural (NA) SNP2(E)-POM-NA 191-10029
Plastic hose clamp, ⌀22.7-24.7mm, natural, 500pcs.
SNP - Snapper Hose Clips range.
Primerjava
Plastic hose clamp, ⌀22.7-24.7mm, natural, 500pcs.
SNP20(E)-POM-NA 191-10209
Primerjava
Ne pozabite
500 pcs.
Natural (NA) SNP20(E)-POM-NA 191-10209
Plastic hose clamp, ⌀9.3-10.5mm, black, 100pcs.
Completely reusable - will not rust or corrode.
Primerjava
Plastic hose clamp, ⌀9.3-10.5mm, black, 100pcs.
SNP2-PA66GF13-BK 192-10020
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) SNP2-PA66GF13-BK 192-10020
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Plastic hose clamp, ⌀10.0-11.4mm, natural, 500pcs.
Designed for quick, ratcheted installation and can be released and reused.
Primerjava
Plastic hose clamp, ⌀10.0-11.4mm, natural, 500pcs.
SNP3(E)-POM-NA 191-10039
Primerjava
Ne pozabite
500 pcs.
Natural (NA) SNP3(E)-POM-NA 191-10039
Plastic hose clamp, ⌀10.8-12.3mm, natural, 500pcs.
Designed for quick, ratcheted installation and can be released and reused.
Primerjava
Plastic hose clamp, ⌀10.8-12.3mm, natural, 500pcs.
SNP4(E)-POM-NA 191-10049
Primerjava
Ne pozabite
500 pcs.
Natural (NA) SNP4(E)-POM-NA 191-10049
Plastic hose clamp, ⌀10.4-11.7mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Primerjava
Plastic hose clamp, ⌀10.4-11.7mm, black, 100pcs.
SNP4-PA66GF13-BK 192-10040
Primerjava
Ne pozabite
100 pcs.
Black (BK) SNP4-PA66GF13-BK 192-10040
Plastic hose clamp, ⌀11.7-13.3mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Primerjava
Plastic hose clamp, ⌀11.7-13.3mm, black, 100pcs.
SNP6-PA66GF13-BK 192-10060
Primerjava
Ne pozabite
100 pcs.
Black (BK) SNP6-PA66GF13-BK 192-10060
Bundling clip for stud, L=55.0mm, SO=22.8mm, black, 1000pcs.
The slim line BC series is particularly compact and flexible.
Primerjava
Bundling clip for stud, L=55.0mm, SO=22.8mm, black, 1000pcs.
BC2212-PA66HIRHS-BK 151-00017
Primerjava
Ne pozabite
1000 pcs.
Black (BK) BC2212-PA66HIRHS-BK 151-00017
Connector clip for hole (oval), EWCAP-005-23, black, 3500pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Primerjava
Connector clip for hole (oval), EWCAP-005-23, black, 3500pcs.
CCOVAL3-PA66HIRHSUV-BK 151-01244
Primerjava
Ne pozabite
3500 pcs.
Black (BK) CCOVAL3-PA66HIRHSUV-BK 151-01244
Connector clip for hole (oval), black, 5000pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Primerjava
Connector clip for hole (oval), black, 5000pcs.
CCOVAL4-PA66HIRHSUV-BK 151-01246
Primerjava
Ne pozabite
5000 pcs.
Black (BK) CCOVAL4-PA66HIRHSUV-BK 151-01246
Cable clip, T=0.7 - 6.35mm, ⌀6.6 mm, Dmin=6.0mm, Dmax=7.6mm
The SC6.6 for solar cables is ideal for quick installation and easy maintenance.
Primerjava
Cable clip, T=0.7 - 6.35mm, ⌀6.6 mm, Dmin=6.0mm, Dmax=7.6mm
SC6.6-PA66HIRHSUV-BK 151-00927
Primerjava
Ne pozabite
100 pcs.
Black (BK) SC6.6-PA66HIRHSUV-BK 151-00927
Cable clip for hole (round), ⌀5.0 mm, Dmin=5.5mm, Dmax=6.7mm
Klam-Klips KK1 - 4.
Primerjava
Cable clip for hole (round), ⌀5.0 mm, Dmin=5.5mm, Dmax=6.7mm
KK2-PA6HIR-BK 234-10200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
500 pcs.
Black (BK) KK2-PA6HIR-BK 234-10200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for hole (round), ⌀5.0 mm, Dmin=7.5mm, Dmax=8.5mm
Klam-Klips KK1 - 4.
Primerjava
Cable clip for hole (round), ⌀5.0 mm, Dmin=7.5mm, Dmax=8.5mm
KK4-PA6HIR-BK 234-10400
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
500 pcs.
Black (BK) KK4-PA6HIR-BK 234-10400
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Primerjava
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
50 pcs.
Black (BK) ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C P-Clamp with chloroprene insert.
Primerjava
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
50 pcs.
Black (BK) ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
50 pcs.
Black (BK) ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
50 pcs.
Black (BK) ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
50 pcs.
Black (BK) ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
50 pcs.
Black (BK) ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
50 pcs.
Black (BK) ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
50 pcs.
Black (BK) ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
50 pcs.
Black (BK) ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Primerjava
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Connector clip for edge, EWCAP-005-11, black, 1000pcs.
Connector clip attaches to surfaces with edge clip.
Primerjava
Connector clip for edge, EWCAP-005-11, black, 1000pcs.
CCEC6-PA66HIRHS-BK 150-92600
Primerjava
Ne pozabite
1000 pcs.
Black (BK) CCEC6-PA66HIRHS-BK 150-92600
Bundling clip for hole (round), L=55.0mm, natural, 10000pcs.
Bundling Clip for round holes 6.5 mm.
Primerjava
Bundling clip for hole (round), L=55.0mm, natural, 10000pcs.
TC2FT6LG-PA66HIRHS-NA 151-00020
Primerjava
Ne pozabite
10000 pcs.
Natural (NA) TC2FT6LG-PA66HIRHS-NA 151-00020
Connector clip for hole (oval)/for connector, black, 1000pcs.
For a secure fixation simply push the connector by hand on our Connector Clip YCCFT62x122.
Primerjava
Connector clip for hole (oval)/for connector, black, 1000pcs.
YCCFT62x122-PA66HIRHS-BK 151-00180
Primerjava
Ne pozabite
1000 pcs.
Black (BK) YCCFT62x122-PA66HIRHS-BK 151-00180
Connector clip for hole (oval), EWCAP-005-11, black, 5000pcs.
Oval fir tree ensures a tight connection without rotation.
Primerjava
Connector clip for hole (oval), EWCAP-005-11, black, 5000pcs.
CC11-PA66HIRHSUV-BK 151-01144
Primerjava
Ne pozabite
5000 pcs.
Black (BK) CC11-PA66HIRHSUV-BK 151-01144
Connector clip, EWCAP-005-11, black, 5000pcs.
Oval fir tree ensures a tight connection without rotation.
Primerjava
Connector clip, EWCAP-005-11, black, 5000pcs.
CC16-PA66HIRHSUV-BK 151-01297
Primerjava
Ne pozabite
5000 pcs.
Black (BK) CC16-PA66HIRHSUV-BK 151-01297
Cable clip for adhesive use/with pipe/tube holder, ⌀3.2 mm, Dmax=3.0mm
Ideal for holding ribbon cables in computer equipment, gaming machines or domestic appliances.
Primerjava
Cable clip for adhesive use/with pipe/tube holder, ⌀3.2 mm, Dmax=3.0mm
TY8H1S-PA66-NA 151-12819
Primerjava
Ne pozabite
100 pcs.
Natural (NA) TY8H1S-PA66-NA 151-12819
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Primerjava
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
50 pcs.
Black (BK) ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
50 pcs.
Black (BK) ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Primerjava
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Primerjava
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Primerjava
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Primerjava
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Bundling clip for edge, L=40.0mm, black, 500pcs.
Tape bar provides a convenient surface for securing a bundle using a cable tie or tape.
Primerjava
Bundling clip for edge, L=40.0mm, black, 500pcs.
EC14-PA66HIRHS-BK 151-03404
Primerjava
Ne pozabite
500 pcs.
Black (BK) EC14-PA66HIRHS-BK 151-03404
Bundling clip for edge, L=46.5mm, black, 500pcs.
Cables and leads can be fastened with a cable tie or adhesive tape to the bar of the mounting element.
Primerjava
Bundling clip for edge, L=46.5mm, black, 500pcs.
EC17-PA66HIRHS-BK 151-03403
Primerjava
Ne pozabite
500 pcs.
Black (BK) EC17-PA66HIRHS-BK 151-03403
Bundling clip for hole (oval), L=40.0mm, black, 1000pcs.
Oval fir tree firmly secures clip to mounting surface.
Primerjava
Bundling clip for hole (oval), L=40.0mm, black, 1000pcs.
WICKELCLIP-VDS-PA66HIRHS-BK 155-16301
Primerjava
Ne pozabite
1000 pcs.
Black (BK) WICKELCLIP-VDS-PA66HIRHS-BK 155-16301
P-clamp short, Dmin=63.0mm, Dmax=80.0mm, ⌀8.31 mm, 180°, black, 90pcs.
Primerjava
P-clamp short, Dmin=63.0mm, Dmax=80.0mm, ⌀8.31 mm, 180°, black, 90pcs.
RCF180SM8SS-PA66HIRHSUV/SS304-BK 151-03122
Primerjava
Ne pozabite
90 pcs.
Black (BK) RCF180SM8SS-PA66HIRHSUV/SS304-BK 151-03122
Connector clip for hole (oval)/for connector, EWCAP-005-7, black, 5000pcs.
Primerjava
Connector clip for hole (oval)/for connector, EWCAP-005-7, black, 5000pcs.
CCOVAL2-PA66HIRHSUV-BK 151-01108
Primerjava
Ne pozabite
5000 pcs.
Black (BK) CCOVAL2-PA66HIRHSUV-BK 151-01108
Metal cable clip for edge, ⌀5.0-7.6mm, T=1.0 - 3.0mm, metal, 5000pcs.
Double-compression design can accommodate up to 2 wires or cables of varying sizes.
Primerjava
Metal cable clip for edge, ⌀5.0-7.6mm, T=1.0 - 3.0mm, metal, 5000pcs.
MSC2-SS304-ML 151-02320
Primerjava
Ne pozabite
5000 pcs.
Metal (ML) MSC2-SS304-ML 151-02320
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.
ALU10C-CR/AL-BK 211-15100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU10C-CR/AL-BK 211-15100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
ALU12C-AL/CR-BK 211-15120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU12C-AL/CR-BK 211-15120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.
ALU15C-AL/CR-BK 211-15150
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU15C-AL/CR-BK 211-15150
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.
ALU6C-AL/CR-BK 211-15060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU6C-AL/CR-BK 211-15060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.
ALU7C-AL/CR-BK 211-15070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU7C-AL/CR-BK 211-15070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.
ALU8C-AL/CR-BK 211-15080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU8C-AL/CR-BK 211-15080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.
ALU9C-AL/CR-BK 211-15090
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU9C-AL/CR-BK 211-15090
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Bundling clip for edge, L=40.0mm, black, 500pcs.
Tape bar provides a convenient surface for securing a bundle using a cable tie or tape.
Primerjava
Bundling clip for edge, L=40.0mm, black, 500pcs.
EC15-PA66HIRHS-BK 151-03401
Primerjava
Ne pozabite
500 pcs.
Black (BK) EC15-PA66HIRHS-BK 151-03401
Bundling clip for hole (round), L=37.0mm, black, 1000pcs.
Bundling Clips with fir tree for a variety of applications with a wide range of panel thicknesses and drilled holes.
Primerjava
Bundling clip for hole (round), L=37.0mm, black, 1000pcs.
TC5FT6S-PA66HIRHS-BK 150-95500
Primerjava
Ne pozabite
1000 pcs.
Black (BK) TC5FT6S-PA66HIRHS-BK 150-95500
Bundling clip for hole (round), L=37.0mm, black, 10000pcs.
Bundling Clip for round holes 6.5 mm, bar length 37 mm.
Primerjava
Bundling clip for hole (round), L=37.0mm, black, 10000pcs.
TC4FT6LG-PA66HIRHS-BK 151-00215
Primerjava
Ne pozabite
10000 pcs.
Black (BK) TC4FT6LG-PA66HIRHS-BK 151-00215
Connector clip for hole (round), black, 500pcs.
Connector Clip for Connectors with AMP connection, with fir tree for round holes.
Primerjava
Connector clip for hole (round), black, 500pcs.
FT6LG-AMP-PA66HIRHS-BK 155-03800
Primerjava
Ne pozabite
500 pcs.
Black (BK) FT6LG-AMP-PA66HIRHS-BK 155-03800
Connector clip for hole (oval), EWCAP-005-11, black, 5000pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Primerjava
Connector clip for hole (oval), EWCAP-005-11, black, 5000pcs.
CCOVAL-PA66HIRHSUV-BK 151-00925
Primerjava
Ne pozabite
5000 pcs.
Black (BK) CCOVAL-PA66HIRHSUV-BK 151-00925

Rezultatov iskanja za "D-Clip Series" v tej kategoriji / Clips, Clamps and Plugs

Cable clips are used to secure cables and wires to surfaces such as desks and walls. Clamps are larger than clips and designed to hold multiple cables and wires together. Connector Clips are used to connect electrical cables and wires to electrical or wire connectors. Blind plugs are used to close holes. Clips, clamps and plugs all come in various shapes, sizes and materials. As different industries have different needs, clips and clamps come with all sorts of features. Some are closed others are open or can be reopened - for maintenance, subsequent installations or exchanges for example.

Facebook  Instagram  X  YouTube  LinkedIn  Link Corporate Blog 
Kontakt Pogoji Podatki o podjetju Navodila in zaveze Izjava o zasebnosti Zemljevid spletnega mesta Novice
Update: 19/10/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.290.2) | Update: 19/10/2025 | Nastavitve zasebnosti
Iskanje prodajalca Kontakt