Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
23/12/2025

Rezultatov iskanja za "Shipbuilding"

2.691 najdeni proizvodi 1 further hit
Rezultati iskanja v kategorijah:
Cable Ties and Fixings

Cable Ties and Fixings  (903)

Cable Ties Inside Serrated  (293) Cable Ties Outside Serrated  (29) Cable Ties, Releasable  (24) Cable Ties, Stainless Steel  (84) Cable Ties With Fixing Elements  (97) Cable Tie Mounts  (109) Fixing Elements  (23) Clips, Clamps and Plugs  (261)
Cable Ties and Fixings
Cable Ties and Fixings (903)
Insulation

Insulation  (578)

Heat Shrink Tubing  (444) Heat Shrinkable Moulded Shapes  (136) Insulating tubes  (3)
Insulation
Insulation (578)
Cable Protection Systems

Cable Protection Systems  (113)

Spiral-Reinforced Conduit Systems  (16) Protective Tubing and Spiral Binding  (53) Expandable Braided Sleeves  (18) Open Woven Sleeves  (43) Wiring Ducts and Accessories  (1)
Cable Protection Systems
Cable Protection Systems (113)
Electrical Installation

Electrical Installation  (201)

Wire Connectors  (21) Cable Rods  (2) Electrical Tapes  (91) Cast Resin Technology  (82) Gel Technology  (2) Chemicals  (3)
Electrical Installation
Electrical Installation (201)
Identification Systems

Identification Systems  (842)

Wire and Cable Markers  (681) Control Panel Labelling  (50) Industrial Identification  (40) RFID tags and cable ties  (56) Hazardous Area Identification  (48) Printers and Software  (19)
Identification Systems
Identification Systems (842)
Application Tooling

Application Tooling  (57)

Automatic Cable Tying System  (18) Application Tooling for Cable Ties  (20) Application Tooling for Snappers  (2) Application Tooling for Heat Shrinkable Tubing  (4) Application Tooling for Non Shrinkable Tubing  (12) Application Tooling for Braided Sleeves  (1)
Application Tooling
Application Tooling (57)
2.691 najdeni proizvodi
Ponastavi vse
Heat Shrinkable Tubing 2:1 on a Reel 25,4/12,7 green/yellow
Primerjava
Heat Shrinkable Tubing 2:1 on a Reel 25,4/12,7 green/yellow
HIS-PACK-25.4/12.7-PO-X-GNYE 300-32547
Primerjava
Ne pozabite
1 pcs.
Green-Yellow (GNYE) HIS-PACK-25.4/12.7-PO-X-GNYE 300-32547
Heat Shrinkable Tubing 2:1 on a Reel 25,4/12,7 red
Primerjava
Heat Shrinkable Tubing 2:1 on a Reel 25,4/12,7 red
HIS-PACK-25.4/12.7-PO-X-RD 300-32542
Primerjava
Ne pozabite
1 pcs.
Red (RD) HIS-PACK-25.4/12.7-PO-X-RD 300-32542
Heat Shrinkable Tubing 2:1 on a Reel 12,7/6,4 green/yellow
Primerjava
Heat Shrinkable Tubing 2:1 on a Reel 12,7/6,4 green/yellow
HIS-PACK-12.7/6.4-PO-X-GNYE 300-31277
Primerjava
Ne pozabite
1 pcs.
Green-Yellow (GNYE) HIS-PACK-12.7/6.4-PO-X-GNYE 300-31277
Heat Shrinkable Tubing 2:1 on a Reel 12,7/6,4 red
Primerjava
Heat Shrinkable Tubing 2:1 on a Reel 12,7/6,4 red
HIS-PACK-12.7/6.4-PO-X-RD 300-31272
Primerjava
Ne pozabite
1 pcs.
Red (RD) HIS-PACK-12.7/6.4-PO-X-RD 300-31272
Heat Shrinkable Tubing 3:1 flexible 24/8 black
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Primerjava
Heat Shrinkable Tubing 3:1 flexible 24/8 black
TF31-24/8-PO-X-BK 333-32400
Primerjava
Ne pozabite
30 metre
Black (BK) TF31-24/8-PO-X-BK 333-32400
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 90°, black, 280pcs.
Primerjava
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 90°, black, 280pcs.
RCB90SM8-PA66HIRHSUV/ST/ZN-BK 151-01457
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
280 pcs.
Black (BK) RCB90SM8-PA66HIRHSUV/ST/ZN-BK 151-01457
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 280pcs.
RCA180SM10.
Primerjava
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 280pcs.
RCB180SM10-PA66HIRHSUV/ST/ZN-BK 151-01390
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
280 pcs.
Black (BK) RCB180SM10-PA66HIRHSUV/ST/ZN-BK 151-01390
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 280pcs.
Primerjava
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 280pcs.
RCB180SM8-PA66HIRHSUV/ST/ZN-BK 151-01440
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
280 pcs.
Black (BK) RCB180SM8-PA66HIRHSUV/ST/ZN-BK 151-01440
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 300pcs.
Primerjava
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 300pcs.
RCA180SM8-PA66HIRHSUV/ST/ZN-BK 151-01416
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
300 pcs.
Black (BK) RCA180SM8-PA66HIRHSUV/ST/ZN-BK 151-01416
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀5.6 mm, 180°, black, 160pcs.
Primerjava
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀5.6 mm, 180°, black, 160pcs.
RCCHANGER-PA66HIRHSUV/ZN-BK 151-03057
Primerjava
Ne pozabite
160 pcs.
Black (BK) RCCHANGER-PA66HIRHSUV/ZN-BK 151-03057
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 90°, black, 160pcs.
Primerjava
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 90°, black, 160pcs.
RCC90SM8-PA66HIRHSUV/ST/ZN-BK 151-01492
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
160 pcs.
Black (BK) RCC90SM8-PA66HIRHSUV/ST/ZN-BK 151-01492
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 160pcs.
Primerjava
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 160pcs.
RCC180SM8-PA66HIRHSUV/ST/ZN-BK 151-01474
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
160 pcs.
Black (BK) RCC180SM8-PA66HIRHSUV/ST/ZN-BK 151-01474
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 160pcs.
Primerjava
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 160pcs.
RCD180SM8-PA66HIRHSUV/ST/ZN-BK 151-01499
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
160 pcs.
Black (BK) RCD180SM8-PA66HIRHSUV/ST/ZN-BK 151-01499
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Primerjava
P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, natural, 1000pcs.
H1P-PA66-NA 211-60019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
1000 pcs.
Natural (NA) H1P-PA66-NA 211-60019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Primerjava
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, natural, 1000pcs.
H6P-PA66-NA 211-60069
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
1000 pcs.
Natural (NA) H6P-PA66-NA 211-60069
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 145.0x2.5mm, ⌀1.5-35mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 145.0x2.5mm, ⌀1.5-35mm, natural, 100pcs.
T18I-PA66-NA 111-02319
Primerjava
Ne pozabite
100 pcs.
Natural (NA) T18I-PA66-NA 111-02319
Cable tie inside serrated, 145.0x2.5mm, ⌀1.5-35.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 145.0x2.5mm, ⌀1.5-35.0mm, black, 100pcs.
T18I-PA66W-BK 111-02360
Primerjava
Ne pozabite
100 pcs.
Black (BK) T18I-PA66W-BK 111-02360
Stainless steel cable tie, ball bearing lock, 521.0x4.6mm, ⌀17.0-152.0mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Primerjava
Stainless steel cable tie, ball bearing lock, 521.0x4.6mm, ⌀17.0-152.0mm, metal, 100pcs.
MBT20SS-SS304-ML 111-93208
Primerjava
Ne pozabite
100 pcs.
Metal (ML) MBT20SS-SS304-ML 111-93208
Automatic cable tie tool Dmax=100.0mm, for 4.5mm, 2.443kg, blue
The automatic bundling tool ATS flex with different jaw sizes.
Primerjava
Automatic cable tie tool Dmax=100.0mm, for 4.5mm, 2.443kg, blue
ATS_flex-MET-BU 102-60000
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
1 pcs.
Blue (BU) ATS_flex-MET-BU 102-60000
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie tool for 2.5-4.8mm, pneumatic, 0.87kg, black
Lightweight but very tough housing made of glass fiber-reinforced plastic.
Primerjava
Cable tie tool for 2.5-4.8mm, pneumatic, 0.87kg, black
MK7P-PA66GF30-BK 110-07100
Primerjava
Ne pozabite
1 pcs.
Black (BK) MK7P-PA66GF30-BK 110-07100
Cable tie outside serrated, 145.0x3.4mm, ⌀1.6-35.0mm, black, 100pcs.
Outside serrations minimize damage to cables, while still providing high tensile strength and low insertion force.
Primerjava
Cable tie outside serrated, 145.0x3.4mm, ⌀1.6-35.0mm, black, 100pcs.
T30ROS-PA66HS-BK 118-04800
Primerjava
Ne pozabite
100 pcs.
Black (BK) T30ROS-PA66HS-BK 118-04800
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
Fastening ties for 5.0 mm round welding or threaded studs.
Primerjava
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
T50SOSSBS5E-2-PA66HS-BK 157-00252
Primerjava
Ne pozabite
500 pcs.
Black (BK) T50SOSSBS5E-2-PA66HS-BK 157-00252
Fixing tie for screw fixation, inside serrated, ⌀1.5-20.0mm, natural, 100pcs.
Screw mount style creates low insertion and high extraction force.
Primerjava
Fixing tie for screw fixation, inside serrated, ⌀1.5-20.0mm, natural, 100pcs.
T18MR-PA66-NA 113-01819
Primerjava
Ne pozabite
100 pcs.
Natural (NA) T18MR-PA66-NA 113-01819
Fixing tie for hole (round), inside serrated, ⌀1.5-31.0mm, black, 500pcs.
The flexible 'discs' adjusts to take up variations in panel thickness - ensuring a firm fixing at all times.
Primerjava
Fixing tie for hole (round), inside serrated, ⌀1.5-31.0mm, black, 500pcs.
T50SD6-PA66HS-BK 111-85350
Primerjava
Ne pozabite
500 pcs.
Black (BK) T50SD6-PA66HS-BK 111-85350
Fixing tie for hole (round), inside serrated, ⌀1.5-31.0mm, natural, 1000pcs.
The flexible 'discs' adjusts to take up variations in panel thickness - ensuring a firm fixing at all times.
Primerjava
Fixing tie for hole (round), inside serrated, ⌀1.5-31.0mm, natural, 1000pcs.
T50SST5-PA66-NA 126-02300
Primerjava
Ne pozabite
1000 pcs.
Natural (NA) T50SST5-PA66-NA 126-02300
Fixing tie for hole (round), outside serrated, ⌀1.5-30.0mm, black, 3500pcs.
Primerjava
Fixing tie for hole (round), outside serrated, ⌀1.5-30.0mm, black, 3500pcs.
T50SOSSFT6.5E-MDL-PA66HS-BK 156-00264
Primerjava
Ne pozabite
500 pcs.
Black (BK) T50SOSSFT6.5E-MDL-PA66HS-BK 156-00264
Fixing tie for hole (round), inside serrated, ⌀1.5-27.0mm, black, 500pcs.
Wing design helps stabilize the cable tie in high vibration applications.
Primerjava
Fixing tie for hole (round), inside serrated, ⌀1.5-27.0mm, black, 500pcs.
T50SSL5-PA66HS-BK 126-02204
Primerjava
Ne pozabite
500 pcs.
Black (BK) T50SSL5-PA66HS-BK 126-02204
Fixing tie for hole (round), ⌀1.5-50.0mm, black, 100pcs.
Primerjava
Fixing tie for hole (round), ⌀1.5-50.0mm, black, 100pcs.
RT50RSF-PA66-BK 115-07010
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) RT50RSF-PA66-BK 115-07010
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 200x4.6mm, ⌀1.5-50.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 200x4.6mm, ⌀1.5-50.0mm, black, 100pcs.
T50R-PA66HS-BK 111-04950
Primerjava
Ne pozabite
100 pcs.
Black (BK) T50R-PA66HS-BK 111-04950
Cable tie inside serrated, 305.0x4.7mm, ⌀1.5-85mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 305.0x4.7mm, ⌀1.5-85mm, natural, 100pcs.
T80I-PA66-NA 111-08229
Primerjava
Ne pozabite
100 pcs.
Natural (NA) T80I-PA66-NA 111-08229
Cable tie inside serrated, 387x7.6mm, ⌀3.0-100mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 387x7.6mm, ⌀3.0-100mm, black, 100pcs.
T120R(E)-PA66W-BK 111-12060
Primerjava
Ne pozabite
100 pcs.
Black (BK) T120R(E)-PA66W-BK 111-12060
Cable tie inside serrated, 365x7.6mm, ⌀5.0-100.0mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 365x7.6mm, ⌀5.0-100.0mm, natural, 100pcs.
T150R-PA66-NA 111-14819
Primerjava
Ne pozabite
100 pcs.
Natural (NA) T150R-PA66-NA 111-14819
Fixing tie for stud, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
Fixing tie for stud fixation and for multipile routing.
Primerjava
Fixing tie for stud, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
T50SDSBS5-PA66HS/PA66HIRHS-BK 150-56193
Primerjava
Ne pozabite
500 pcs.
Black (BK) T50SDSBS5-PA66HS/PA66HIRHS-BK 150-56193
Stainless steel embossing machine, 558x480x355mm
A quiet, durable, and easy to use metal plate embossing printer.
Primerjava
Stainless steel embossing machine, 558x480x355mm
M-BOSS Compact-MET-BU/WH 544-20000
Primerjava
Ne pozabite
1 pcs.
Blue (BU), White (WH) M-BOSS Compact-MET-BU/WH 544-20000
RFID cable tie, durable, 125 kHz (LF), 200x4.6mm, ⌀1.5-50mm, blue, 100pcs.
MCTRFID – detectable cable ties (metal content) with RFID transponder.
Primerjava
RFID cable tie, durable, 125 kHz (LF), 200x4.6mm, ⌀1.5-50mm, blue, 100pcs.
MCTRFIDCLA-PA66MD-BU 111-01976
Primerjava
Ne pozabite
100 pcs.
Blue (BU) MCTRFIDCLA-PA66MD-BU 111-01976
RFID cable tie, durable, 13.56 MHz (HF), 200x4.6mm, ⌀1.5-50mm, blue, 100pcs.
MCTRFID – detectable cable ties (metal content) with RFID transponder.
Primerjava
RFID cable tie, durable, 13.56 MHz (HF), 200x4.6mm, ⌀1.5-50mm, blue, 100pcs.
MCTRFIDCHA-PA66MD-BU 111-01676
Primerjava
Ne pozabite
100 pcs.
Blue (BU) MCTRFIDCHA-PA66MD-BU 111-01676
RFID hard tag, 869 MHz (UHF), bolt-on, ⌀50.00mm, H=3.50mm, black, 250pcs.
RFID HARDTAG DISC – Identification element with UHF RFID transponder (HardLine) to be fixed with screws, nails, bolts or rivets.
Primerjava
RFID hard tag, 869 MHz (UHF), bolt-on, ⌀50.00mm, H=3.50mm, black, 250pcs.
RFID HARDTAG DISC-PPA-BK 556-00809
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
250 pcs.
Black (BK) RFID HARDTAG DISC-PPA-BK 556-00809
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
RFID hard tag, 860-960 MHz (UHF), bolt-on, 77.00x25.00mm, green, 250pcs.
RFID FLEXTAG – Identification element with UHF RFID transponder (FlexLine) to be fixed with screws, nails or bolts.
Primerjava
RFID hard tag, 860-960 MHz (UHF), bolt-on, 77.00x25.00mm, green, 250pcs.
RFID FLEXTAG 77x25-TPU-GN 556-00800
Primerjava
Ne pozabite
250 pcs.
Green (GN) RFID FLEXTAG 77x25-TPU-GN 556-00800
RFID hard tag, 860-960 MHz (UHF), bolt-on, 87.00x25.00mm, yellow, 250pcs.
RFID FLEXTAG — identification element with UHF RFID transponder to be fixed with screws, nails, bolts or cable ties.
Primerjava
RFID hard tag, 860-960 MHz (UHF), bolt-on, 87.00x25.00mm, yellow, 250pcs.
RFID FLEXTAG 87x25-TPU-YE 556-00801
Primerjava
Ne pozabite
250 pcs.
Yellow (YE) RFID FLEXTAG 87x25-TPU-YE 556-00801
RFID hard tag, 860-960 MHz (UHF), bolt-on, 110.00x25.00mm, yellow, 250pcs.
RFID FLEXTAG – identification element with UHF RFID transponder (FlexLine) to be fixed with screws, nails, bolts or rivets.
Primerjava
RFID hard tag, 860-960 MHz (UHF), bolt-on, 110.00x25.00mm, yellow, 250pcs.
RFID FLEXTAG 110x25-TPU-YE 556-00850
Primerjava
Ne pozabite
250 pcs.
Yellow (YE) RFID FLEXTAG 110x25-TPU-YE 556-00850
RFID hard tag, 865-956 MHz (UHF), bolt-on, 60.00x18.00mm, H=8.00mm, grey, 250pcs.
HARDTAG SOLID – identification element with UHF RFID transponder (ToughLine) to be fixed with screws, nails or bolts.
Primerjava
RFID hard tag, 865-956 MHz (UHF), bolt-on, 60.00x18.00mm, H=8.00mm, grey, 250pcs.
HardTag Solid 60x18-PC/ABS-GY 556-00852
Primerjava
Ne pozabite
250 pcs.
Grey (GY) HardTag Solid 60x18-PC/ABS-GY 556-00852
RFID hard tag, 860-960 MHz (UHF), tie-on, 83.00x25.00mm, yellow, 250pcs.
RFID FLEXTAG 83x25 — identification element with UHF RFID transponder to be fixed with cable ties.
Primerjava
RFID hard tag, 860-960 MHz (UHF), tie-on, 83.00x25.00mm, yellow, 250pcs.
RFID FLEXTAG 83x25-TPU-YE 556-00803
Primerjava
Ne pozabite
250 pcs.
Yellow (YE) RFID FLEXTAG 83x25-TPU-YE 556-00803
RFID hard tag, 865-956 MHz (UHF), weld-on, 105.00x35.00mm, H=15.00mm, grey, 240pcs.
RFID HARDTAG SOLID – Identification element with UHF RFID transponder (ToughLine) to be welded to metal objects.
Primerjava
RFID hard tag, 865-956 MHz (UHF), weld-on, 105.00x35.00mm, H=15.00mm, grey, 240pcs.
RFID HARDTAG SOLID 105x35-PC/ABS/SS-GY 556-00811
Primerjava
Ne pozabite
60 pcs.
Grey (GY) RFID HARDTAG SOLID 105x35-PC/ABS/SS-GY 556-00811
Push-in wire connector, 2 conductors, 0.5 to 2.5 mm² solid wires / 1.0 to 2.5 mm² stranded wires, transparent/yellow, 150pcs.
Push-in wire connectors HCPM-2.
Primerjava
Push-in wire connector, 2 conductors, 0.5 to 2.5 mm² solid wires / 1.0 to 2.5 mm² stranded wires, transparent/yellow, 150pcs.
HCPM-2-PC-CL/YE 148-90036
Primerjava
Ne pozabite
150 pcs.
Transparent (CL), Yellow (YE) HCPM-2-PC-CL/YE 148-90036
Push-in wire connector, 3 conductors, 0.5 to 2.5 mm² solid wires / 1.0 to 2.5 mm² stranded wires, orange/transparent, 100pcs.
Push-in wire connectors HCPM-3.
Primerjava
Push-in wire connector, 3 conductors, 0.5 to 2.5 mm² solid wires / 1.0 to 2.5 mm² stranded wires, orange/transparent, 100pcs.
HCPM-3-PC-CL/OG 148-90037
Primerjava
Ne pozabite
100 pcs.
Orange (OG), Transparent (CL) HCPM-3-PC-CL/OG 148-90037
Push-in wire connector, 4 conductors, 0.5 to 2.5 mm² solid wires / 1.0 to 2.5 mm² stranded wires, transparent, 100pcs.
Push-in wire connectors HCPM-4.
Primerjava
Push-in wire connector, 4 conductors, 0.5 to 2.5 mm² solid wires / 1.0 to 2.5 mm² stranded wires, transparent, 100pcs.
HCPM-4-PC-CL 148-90038
Primerjava
Ne pozabite
100 pcs.
Transparent (CL) HCPM-4-PC-CL 148-90038
Push-in wire connector, 5 conductors, 0.5 to 2.5 mm² solid wires / 1.0 to 2.5 mm² stranded wires, transparent/blue, 75pcs.
Push-in wire connectors HCPM-5.
Primerjava
Push-in wire connector, 5 conductors, 0.5 to 2.5 mm² solid wires / 1.0 to 2.5 mm² stranded wires, transparent/blue, 75pcs.
HCPM-5-PC-BU/CL 148-90039
Primerjava
Ne pozabite
75 pcs.
Transparent (CL), Blue (BU) HCPM-5-PC-BU/CL 148-90039
Push-in wire connector, 6 conductors, 0.5 to 2.5 mm² solid wires / 1.0 to 2.5 mm² stranded wires, transparent/violet, 50pcs.
Push-in wire connectors HCPM-6.
Primerjava
Push-in wire connector, 6 conductors, 0.5 to 2.5 mm² solid wires / 1.0 to 2.5 mm² stranded wires, transparent/violet, 50pcs.
HCPM-6-PC-CL/VT 148-90040
Primerjava
Ne pozabite
50 pcs.
Transparent (CL), Violet (VT) HCPM-6-PC-CL/VT 148-90040
Push-in wire connector, 8 conductors, 0.5 to 2.5 mm² solid wires / 1.0 to 2.5 mm² stranded wires, transparent/black, 50pcs.
Push-in wire connectors HCPM-8.
Primerjava
Push-in wire connector, 8 conductors, 0.5 to 2.5 mm² solid wires / 1.0 to 2.5 mm² stranded wires, transparent/black, 50pcs.
HCPM-8-PC-BK/CL 148-90041
Primerjava
Ne pozabite
50 pcs.
Transparent (CL), Black (BK) HCPM-8-PC-BK/CL 148-90041
Cable marker, to identify: wire and cable/for snapping, inkjet print "0-9", ⌀2.00-2.80mm, yellow, box=1000pcs.
WIC - pre-printed cable markers.
Primerjava
Cable marker, to identify: wire and cable/for snapping, inkjet print "0-9", ⌀2.00-2.80mm, yellow, box=1000pcs.
WIC1-0-9-PA66-YE 561-01101
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) WIC1-0-9-PA66-YE 561-01101
Cable marker, to identify: wire and cable/for snapping, inkjet print "1", ⌀2.00-2.80mm, yellow, box=1000pcs.
WIC - pre-printed cable markers.
Primerjava
Cable marker, to identify: wire and cable/for snapping, inkjet print "1", ⌀2.00-2.80mm, yellow, box=1000pcs.
WIC1-1-PA66-YE 561-01614
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) WIC1-1-PA66-YE 561-01614
Cable marker, to identify: wire and cable/for snapping, inkjet print "2", ⌀2.00-2.80mm, yellow, box=1000pcs.
WIC - pre-printed cable markers.
Primerjava
Cable marker, to identify: wire and cable/for snapping, inkjet print "2", ⌀2.00-2.80mm, yellow, box=1000pcs.
WIC1-2-PA66-YE 561-01624
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) WIC1-2-PA66-YE 561-01624
Cable marker, to identify: wire and cable/for snapping, inkjet print "4", ⌀2.00-2.80mm, yellow, box=1000pcs.
WIC - pre-printed cable markers.
Primerjava
Cable marker, to identify: wire and cable/for snapping, inkjet print "4", ⌀2.00-2.80mm, yellow, box=1000pcs.
WIC1-4-PA66-YE 561-01644
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) WIC1-4-PA66-YE 561-01644
Cable marker, to identify: wire and cable/for snapping, inkjet print "A,E,L,N,R,S,T,+,-,⏚", ⌀2.00-2.80mm, yellow, box=1000pcs.
WIC - pre-printed cable markers.
Primerjava
Cable marker, to identify: wire and cable/for snapping, inkjet print "A,E,L,N,R,S,T,+,-,⏚", ⌀2.00-2.80mm, yellow, box=1000pcs.
WIC1-A,E,L,N,R,S,T,+,-,Earth-PA66-YE 561-01994
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) WIC1-A,E,L,N,R,S,T,+,-,Earth-PA66-YE 561-01994
Cable marker, to identify: wire and cable/for snapping, inkjet print "0-9", ⌀2.80-3.80mm, special, box=1000pcs.
WIC - pre-printed cable markers.
Primerjava
Cable marker, to identify: wire and cable/for snapping, inkjet print "0-9", ⌀2.80-3.80mm, special, box=1000pcs.
WIC2-0-9-PA66-Special 561-02100
Primerjava
Ne pozabite
1000 pcs.
International resistor colour code (CC) WIC2-0-9-PA66-Special 561-02100
Cable marker, to identify: wire and cable/for snapping, inkjet print "4", ⌀2.80-3.80mm, yellow, box=1000pcs.
WIC - pre-printed cable markers.
Primerjava
Cable marker, to identify: wire and cable/for snapping, inkjet print "4", ⌀2.80-3.80mm, yellow, box=1000pcs.
WIC2-4-PA66-YE 561-02644
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) WIC2-4-PA66-YE 561-02644
Cable marker, to identify: wire and cable/for snapping, inkjet print "A,E,L,N,R,S,T,+,-,⏚", ⌀2.80-3.80mm, yellow, box=1000pcs.
WIC - pre-printed cable markers.
Primerjava
Cable marker, to identify: wire and cable/for snapping, inkjet print "A,E,L,N,R,S,T,+,-,⏚", ⌀2.80-3.80mm, yellow, box=1000pcs.
WIC2-A,E,L,N,R,S,T,+,-,Earth-PA66-YE 561-02994
Primerjava
Ne pozabite
1000 pcs.
Yellow (YE) WIC2-A,E,L,N,R,S,T,+,-,Earth-PA66-YE 561-02994
Heat Shrinkable Tubing 2:1 VG-Norm 2.4/1.2 black
3:1 shrink ratio tubing is ideal in many applications.
Primerjava
Heat Shrinkable Tubing 2:1 VG-Norm 2.4/1.2 black
HFT-A-2.4/1.2-PO-X-BK 305-02400
Primerjava
Ne pozabite
400 metre
Black (BK) HFT-A-2.4/1.2-PO-X-BK 305-02400
Heat Shrinkable Tubing 2:1 flexible1,6/,08 black
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Primerjava
Heat Shrinkable Tubing 2:1 flexible1,6/,08 black
TF21-1.6/0.8-PO-X-BK 309-10160
Primerjava
Ne pozabite
300 metre
Black (BK) TF21-1.6/0.8-PO-X-BK 309-10160
Heat Shrinkable Tubing 2:1 flexible2,4/1,2 black
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Primerjava
Heat Shrinkable Tubing 2:1 flexible2,4/1,2 black
TF21-2.4/1.2-PO-X-BK 309-10240
Primerjava
Ne pozabite
300 metre
Black (BK) TF21-2.4/1.2-PO-X-BK 309-10240
Heat Shrinkable Tubing 2:1 black 19,1/9,5
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Primerjava
Heat Shrinkable Tubing 2:1 black 19,1/9,5
TF21-19.1/9.5-PO-X-BK 309-11900
Primerjava
Ne pozabite
50 metre
Black (BK) TF21-19.1/9.5-PO-X-BK 309-11900
Heat Shrinkable Tubing 4:1 Medium Wall Adhesive Lined length 1m 140/42 black
MA47 - Halogenfree 4:1 Medium Dual Wall Heat Shrink Tubing.
Primerjava
Heat Shrinkable Tubing 4:1 Medium Wall Adhesive Lined length 1m 140/42 black
MA47-140/42-PO-X-BK 323-21400
Primerjava
Ne pozabite
3 pcs.
Black (BK) MA47-140/42-PO-X-BK 323-21400
Heat Shrinkable Tubing with Adhesive Liner 3:1 on a Reel 3/1 black
Primerjava
Heat Shrinkable Tubing with Adhesive Liner 3:1 on a Reel 3/1 black
HIS-A-3/1-PO-X-BK 308-10300
Primerjava
Ne pozabite
1 pcs.
Black (BK) HIS-A-3/1-PO-X-BK 308-10300
Heat Shrinkable Tubing with Adhesive Liner 3:1 on a Reel 6/2 black
Primerjava
Heat Shrinkable Tubing with Adhesive Liner 3:1 on a Reel 6/2 black
HIS-A-6/2-PO-X-BK 308-10600
Primerjava
Ne pozabite
1 pcs.
Black (BK) HIS-A-6/2-PO-X-BK 308-10600
Heat Shrinkable Tubing with Adhesive Liner 3:1 on a Reel 9/3 black
Primerjava
Heat Shrinkable Tubing with Adhesive Liner 3:1 on a Reel 9/3 black
HIS-A-9/3-PO-X-BK 308-10900
Primerjava
Ne pozabite
1 pcs.
Black (BK) HIS-A-9/3-PO-X-BK 308-10900
Heat Shrinkable Tubing with Adhesive Liner 3:1 on a Reel 18/6 black
Primerjava
Heat Shrinkable Tubing with Adhesive Liner 3:1 on a Reel 18/6 black
HIS-A-18/6-PO-X-BK 308-11800
Primerjava
Ne pozabite
1 pcs.
Black (BK) HIS-A-18/6-PO-X-BK 308-11800
Heat Shrinkable Tubing with Adhesive Liner 3:1 on a Reel 24/8 black
Primerjava
Heat Shrinkable Tubing with Adhesive Liner 3:1 on a Reel 24/8 black
HIS-A-24/8-PO-X-BK 308-12400
Primerjava
Ne pozabite
1 pcs.
Black (BK) HIS-A-24/8-PO-X-BK 308-12400
Heat Shrinkable Tubing 3:1 on a Reel 6/2 black
Primerjava
Heat Shrinkable Tubing 3:1 on a Reel 6/2 black
HIS-3-6/2-PO-X-BK 308-30600
Primerjava
Ne pozabite
1 pcs.
Black (BK) HIS-3-6/2-PO-X-BK 308-30600
Heat Shrinkable Tubing 2:1 on a Reel 9,5/4,7 green/yellow
Primerjava
Heat Shrinkable Tubing 2:1 on a Reel 9,5/4,7 green/yellow
HIS-PACK-9.5/4.7-PO-X-GNYE 300-30957
Primerjava
Ne pozabite
1 pcs.
Green-Yellow (GNYE) HIS-PACK-9.5/4.7-PO-X-GNYE 300-30957
Heat Shrinkable Tubing 2:1 on a Reel 19,1/9,5 green/yellow
Primerjava
Heat Shrinkable Tubing 2:1 on a Reel 19,1/9,5 green/yellow
HIS-PACK-19.1/9.5-PO-X-GNYE 300-31907
Primerjava
Ne pozabite
1 pcs.
Green-Yellow (GNYE) HIS-PACK-19.1/9.5-PO-X-GNYE 300-31907
Automatic cable tie tool Dmax=20mm, for 2.5mm, 1.813kg, blue
Autotool CPK hybrid T18RA
Primerjava
Automatic cable tie tool Dmax=20mm, for 2.5mm, 1.813kg, blue
Autotool_CPK_hybrid-MET/PL-BU 106-60000
Primerjava
Ne pozabite
1 pcs.
Dark Blue (DKBU) Autotool_CPK_hybrid-MET/PL-BU 106-60000
Automatic cable tie tool Dmax=20mm, for 2.5mm, 3.184kg, blue
Automated cable tie gun CPK hybrid - battery option.
Primerjava
Automatic cable tie tool Dmax=20mm, for 2.5mm, 3.184kg, blue
Autotool_CPK_hybrid_Battery_Set-PL/MET-BU 106-66000
Primerjava
Ne pozabite
1 pcs.
Dark Blue (DKBU) Autotool_CPK_hybrid_Battery_Set-PL/MET-BU 106-66000
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Primerjava
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 1000pcs.
H5P-PA66-NA 211-60059
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
1000 pcs.
Natural (NA) H5P-PA66-NA 211-60059
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 760.0x7.6mm, ⌀5.0-225mm, black, 50pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 760.0x7.6mm, ⌀5.0-225mm, black, 50pcs.
T120L-PA66W-BK 111-12430
Primerjava
Ne pozabite
50 pcs.
Black (BK) T120L-PA66W-BK 111-12430
Cable tie inside serrated, 198x3.5mm, ⌀1.5-50mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 198x3.5mm, ⌀1.5-50mm, natural, 100pcs.
T30L-PA66-NA 111-03419
Primerjava
Ne pozabite
100 pcs.
Natural (NA) T30L-PA66-NA 111-03419
Cable tie inside serrated, 198x3.5mm, ⌀1.5-50mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 198x3.5mm, ⌀1.5-50mm, black, 100pcs.
T30L-PA66W-BK 111-03460
Primerjava
Ne pozabite
100 pcs.
Black (BK) T30L-PA66W-BK 111-03460
Cable tag, continuous, thermal transfer print, 100.0x15.0mm, yellow, reel=125pcs.
TIPTAG PU – printed mark has a tattoo-like permanency.
Primerjava
Cable tag, continuous, thermal transfer print, 100.0x15.0mm, yellow, reel=125pcs.
TTAGPU15X100YE-PUR-YE 556-25010
Primerjava
Ne pozabite
125 reel
Yellow (YE) TTAGPU15X100YE-PUR-YE 556-25010
Cable tag, continuous, thermal transfer print, 100.0x15.0mm, white, reel=125pcs.
TIPTAG PU – printed mark has a tattoo-like permanency.
Primerjava
Cable tag, continuous, thermal transfer print, 100.0x15.0mm, white, reel=125pcs.
TTAGPU15X100WH-PUR-WH 556-25006
Primerjava
Ne pozabite
125 reel
White (WH) TTAGPU15X100WH-PUR-WH 556-25006
Cable tag, continuous, thermal transfer print, 65.0x15.0mm, blue, reel=190pcs.
TIPTAG PU – printed mark has a tattoo-like permanency.
Primerjava
Cable tag, continuous, thermal transfer print, 65.0x15.0mm, blue, reel=190pcs.
TTAGPU15X65BU-PUR-BU 556-25016
Primerjava
Ne pozabite
190 reel
Blue (BU) TTAGPU15X65BU-PUR-BU 556-25016
Fixing tie for stud, inside serrated, ⌀4.0-35.0mm, black, 500pcs.
Mount can be used in a wide variety of applications where 5mm weld studs or 5mm ISO bolts.
Primerjava
Fixing tie for stud, inside serrated, ⌀4.0-35.0mm, black, 500pcs.
T50SSBS5OT-E-PA66HS-BK 155-30602
Primerjava
Ne pozabite
500 pcs.
Black (BK) T50SSBS5OT-E-PA66HS-BK 155-30602
Fixing tie for hole (round), inside serrated, ⌀1.5-45.0mm, black, 500pcs.
Wing design helps stabilize the tie in high vibration applications.
Primerjava
Fixing tie for hole (round), inside serrated, ⌀1.5-45.0mm, black, 500pcs.
T50RSFM-PA66HS-BK 111-85720
Primerjava
Ne pozabite
500 pcs.
Black (BK) T50RSFM-PA66HS-BK 111-85720
Fixing tie for hole (round), inside serrated, ⌀50.0mm, black, 1000pcs.
1-Piece Fixing Tie with Arrowhead.
Primerjava
Fixing tie for hole (round), inside serrated, ⌀50.0mm, black, 1000pcs.
T80RSF6.5F-PA66HS-BK 126-02600
Primerjava
Ne pozabite
1000 pcs.
Black (BK) T80RSF6.5F-PA66HS-BK 126-02600
Fixing tie for stud, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable ties with various weld stud fixing methods.
Primerjava
Fixing tie for stud, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSSBS5-PA66HS-BK 150-21299
Primerjava
Ne pozabite
500 pcs.
Black (BK) T50ROSSBS5-PA66HS-BK 150-21299
Fixing tie for stud, inside serrated, ⌀2.0-35.0mm, black, 300pcs.
Cable ties with various weld stud fixing methods.
Primerjava
Fixing tie for stud, inside serrated, ⌀2.0-35.0mm, black, 300pcs.
T50SSBS5-PA66HS-BK 150-21293
Primerjava
Ne pozabite
300 pcs.
Black (BK) T50SSBS5-PA66HS-BK 150-21293
Cable tie inside serrated, 150x3.5mm, ⌀1.5-35.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 150x3.5mm, ⌀1.5-35.0mm, black, 100pcs.
T30R-PA66-BK 111-03210
Primerjava
Ne pozabite
100 pcs.
Black (BK) T30R-PA66-BK 111-03210
Cable tie inside serrated, 150x3.5mm, ⌀1.5-35.0mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 150x3.5mm, ⌀1.5-35.0mm, natural, 100pcs.
T30R-PA66HS-NA 111-03259
Primerjava
Ne pozabite
100 pcs.
Natural (NA) T30R-PA66HS-NA 111-03259
Cable tie inside serrated, 210x4.7mm, ⌀1.5-55.0mm, black, 1000pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Primerjava
Cable tie inside serrated, 210x4.7mm, ⌀1.5-55.0mm, black, 1000pcs.
T80R-PA66HS-BK 117-08070
Primerjava
Ne pozabite
1000 pcs.
Black (BK) T80R-PA66HS-BK 117-08070
Fixing tie for hole (round), inside serrated, ⌀5.0-50.0mm, black, 500pcs.
2-piece fixing tie for round holes with fir tree.
Primerjava
Fixing tie for hole (round), inside serrated, ⌀5.0-50.0mm, black, 500pcs.
T30LFT6LG-PA66HS/PA66HIRHS-BK 150-31097
Primerjava
Ne pozabite
500 pcs.
Black (BK) T30LFT6LG-PA66HS/PA66HIRHS-BK 150-31097
Cable tie mount for adhesive use, Wmax=5.4mm, black, 100pcs.
FlexTack FMB for round and angled surfaces
Primerjava
Cable tie mount for adhesive use, Wmax=5.4mm, black, 100pcs.
FMB4APT-A-PA66HS-BK 151-02219
Primerjava
Ne pozabite
100 pcs.
Black (BK) FMB4APT-A-PA66HS-BK 151-02219
Cable tie mount for screw fixation, Wmax=6.0mm, ⌀4.5 mm, M4 Screw, natural, 100pcs.
KR6G5 Srew Fixing Mounts with curved design
Primerjava
Cable tie mount for screw fixation, Wmax=6.0mm, ⌀4.5 mm, M4 Screw, natural, 100pcs.
KR6G5-PA66-NA 151-24619
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) KR6G5-PA66-NA 151-24619
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, natural, 100pcs.
KR8G5 Srew Fixing Mounts with curved design
Primerjava
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, natural, 100pcs.
KR8G5-PA66-NA 151-24819
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) KR8G5-PA66-NA 151-24819
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Heat Shrinkable Tubing 2:1 VG-Norm 3.2/1.6 black
3:1 shrink ratio tubing is ideal in many applications.
Primerjava
Heat Shrinkable Tubing 2:1 VG-Norm 3.2/1.6 black
HFT-A-3.2/1.6-PO-X-BK 305-03200
Primerjava
Ne pozabite
400 metre
Black (BK) HFT-A-3.2/1.6-PO-X-BK 305-03200
Heat Shrinkable Tubing 2:1 VG-Norm 4.8/2.4 black
3:1 shrink ratio tubing is ideal in many applications.
Primerjava
Heat Shrinkable Tubing 2:1 VG-Norm 4.8/2.4 black
HFT-A-4.8/2.4-PO-X-BK 305-04800
Primerjava
Ne pozabite
300 metre
Black (BK) HFT-A-4.8/2.4-PO-X-BK 305-04800
Heat Shrinkable Tubing 2:1 VG-Norm 6.4/3.2 black
3:1 shrink ratio tubing is ideal in many applications.
Primerjava
Heat Shrinkable Tubing 2:1 VG-Norm 6.4/3.2 black
HFT-A-6.4/3.2-PO-X-BK 305-06400
Primerjava
Ne pozabite
300 metre
Black (BK) HFT-A-6.4/3.2-PO-X-BK 305-06400
Heat Shrinkable Tubing 2:1 VG-Norm 19.0/9.5 black
3:1 shrink ratio tubing is ideal in many applications.
Primerjava
Heat Shrinkable Tubing 2:1 VG-Norm 19.0/9.5 black
HFT-A-19.0/9.5-PO-X-BK 305-19000
Primerjava
Ne pozabite
50 metre
Black (BK) HFT-A-19.0/9.5-PO-X-BK 305-19000
Heat Shrinkable Tubing 2:1 flexible3.2/1.6 black
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Primerjava
Heat Shrinkable Tubing 2:1 flexible3.2/1.6 black
TF21-3.2/1.6-PO-X-BK 309-10320
Primerjava
Ne pozabite
300 metre
Black (BK) TF21-3.2/1.6-PO-X-BK 309-10320
Heat Shrinkable Tubing 2:1 flexible 4.8/2.4 black
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Primerjava
Heat Shrinkable Tubing 2:1 flexible 4.8/2.4 black
TF21-4.8/2.4-PO-X-BK 309-10480
Primerjava
Ne pozabite
300 metre
Black (BK) TF21-4.8/2.4-PO-X-BK 309-10480
Heat Shrinkable Tubing 2:1 flexible 9.5/4.8 black
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Primerjava
Heat Shrinkable Tubing 2:1 flexible 9.5/4.8 black
TF21-9.5/4.8-PO-X-BK 309-10950
Primerjava
Ne pozabite
150 metre
Black (BK) TF21-9.5/4.8-PO-X-BK 309-10950
Heat Shrinkable Tubing 2:1 flexible25.4/12.7 black
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Primerjava
Heat Shrinkable Tubing 2:1 flexible25.4/12.7 black
TF21-25.4/12.7-PO-X-BK 309-12540
Primerjava
Ne pozabite
50 metre
Black (BK) TF21-25.4/12.7-PO-X-BK 309-12540
Heat Shrinkable Tubing 4:1 Medium Wall Adhesive Lined length 1m 63/19 black
MA47 - Halogenfree 4:1 Medium Dual Wall Heat Shrink Tubing.
Primerjava
Heat Shrinkable Tubing 4:1 Medium Wall Adhesive Lined length 1m 63/19 black
MA47-63/19-PO-X-BK 323-20630
Primerjava
Ne pozabite
6 pcs.
Black (BK) MA47-63/19-PO-X-BK 323-20630
Facebook  Instagram  X  YouTube  LinkedIn  Link Corporate Blog 
Kontakt Pogoji Podatki o podjetju Navodila in zaveze Izjava o zasebnosti Zemljevid spletnega mesta Novice
Update: 21/12/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.293.4) | Update: 21/12/2025 | Nastavitve zasebnosti
Iskanje prodajalca Kontakt