Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
06/09/2025

Rezultatov iskanja za "D-Clip Series"

3.514 najdeni proizvodi 4 further hits
Opozorilo:  V naši ponudbi ni izdelka, ki bi ustrezal izbranim pogojem.  Spodaj so prikazani rezultati vašega iskanja.

Spremenite izbrane pogoje in nato poizkusite znova.

Rezultati iskanja v kategorijah:
Cable Ties and Fixings

Cable Ties and Fixings  (1888)

Cable Ties Inside Serrated  (455) Cable Ties Outside Serrated  (69) Cable Ties Without Serration  (35) Cable Ties, Releasable  (85) Cable Ties, Stainless Steel  (132) Cable Ties With Fixing Elements  (328) Cable Tie Mounts  (178) Fixing Elements  (130) Clips, Clamps and Plugs  (596)
Cable Ties and Fixings
Cable Ties and Fixings (1888)
Insulation

Insulation  (632)

Heat Shrink Tubing  (288) Heat Shrinkable Moulded Shapes  (333) Insulating tubes  (13)
Insulation
Insulation (632)
Cable Protection Systems

Cable Protection Systems  (180)

Non-Metallic Conduit Systems  (10) Spiral-Reinforced Conduit Systems  (10) Conduit System Accessories  (17) Protective Tubing and Spiral Binding  (20) Expandable Braided Sleeves  (18) Open Woven Sleeves  (18) Grommets  (60) Wiring Ducts and Accessories  (45)
Cable Protection Systems
Cable Protection Systems (180)
Electrical Installation

Electrical Installation  (1)

Industrial Silicones  (1)
Electrical Installation
Electrical Installation (1)
Identification Systems

Identification Systems  (515)

Wire and Cable Markers  (439) Control Panel Labelling  (19) Industrial Identification  (4) RFID tags and cable ties  (52) Security Labeling  (5) Hazardous Area Identification  (1)
Identification Systems
Identification Systems (515)
Application Tooling

Application Tooling  (39)

Automatic Cable Tying System  (1) Application Tooling for Cable Ties  (25) Application Tooling for Snappers  (3) Application Tooling for Non Shrinkable Tubing  (8) Application Tooling for Braided Sleeves  (2)
Application Tooling
Application Tooling (39)
Connectivity

Connectivity  (260)

Patch Panels  (5) Data Outlets  (5) Fibre  (12) Cable  (64) Accessories  (14) Enclosures  (82) Cablelok  (78) Broadband Accessories  (78)
Connectivity
Connectivity (260)
3.514 najdeni proizvodi
Ponastavi vse
Cable tie mount for adhesive use, Wmax=4.7mm, black, 100pcs.
PMB3 paste adhesive mount for fixing with paste/liquid adhesive.
Primerjava
Cable tie mount for adhesive use, Wmax=4.7mm, black, 100pcs.
PMB3-PA666V0-BK 151-02575
Primerjava
Ne pozabite
100 pcs.
Black (BK) PMB3-PA666V0-BK 151-02575
Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 1000pcs.
These HDM (Heavy duty mount) are suitable for assembling on screws.
Primerjava
Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 1000pcs.
KR8/33HDMP6SET-PA66W/PA66GF15-BK 156-02483
Primerjava
Ne pozabite
1000 pcs.
Black (BK) KR8/33HDMP6SET-PA66W/PA66GF15-BK 156-02483
Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 1000pcs.
These HDM (Heavy duty mount) are suitable for assembling on screws.
Primerjava
Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 1000pcs.
KR8/33HDMP8SET-PA66W/PA66GF15-BK 156-02484
Primerjava
Ne pozabite
1000 pcs.
Black (BK) KR8/33HDMP8SET-PA66W/PA66GF15-BK 156-02484
Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 500pcs.
DHDM (Double heavy duty mount) for parallel routing of bundles.
Primerjava
Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 500pcs.
KR8/33DHDM6SET-PA66W/PA66GF15-BK 156-02485
Primerjava
Ne pozabite
500 pcs.
Black (BK) KR8/33DHDM6SET-PA66W/PA66GF15-BK 156-02485
Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 500pcs.
DHDM (Double heavy duty mount) for parallel routing of bundles.
Primerjava
Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 500pcs.
KR8/33DHDM8SET-PA66W/PA66GF15-BK 156-02486
Primerjava
Ne pozabite
500 pcs.
Black (BK) KR8/33DHDM8SET-PA66W/PA66GF15-BK 156-02486
Cable tie tool for 4.5 - 12.3mm, manual, 0.562kg, metal/black
KST-STG200.
Primerjava
Cable tie tool for 4.5 - 12.3mm, manual, 0.562kg, metal/black
KST-STG200-MET-BK/ML 110-09950
Primerjava
Ne pozabite
1 pcs.
Metal (ML), Black (BK) KST-STG200-MET-BK/ML 110-09950
Three-pronged plier Dmin=1.25mm, Dmax=1.75mm, 10.5mm, 28mm, metal, 1pc.
Fast, secure application with the NA three-pronged pliers.
Primerjava
Three-pronged plier Dmin=1.25mm, Dmax=1.75mm, 10.5mm, 28mm, metal, 1pc.
NA0/1-MET-ML 621-10001
Primerjava
Ne pozabite
1 pcs.
Metal (ML) NA0/1-MET-ML 621-10001
Three-pronged plier Dmin=2.50mm, Dmax=5.00mm, 11.0mm, 28mm, metal, 1pc.
Fast, secure application with the NA three-pronged pliers.
Primerjava
Three-pronged plier Dmin=2.50mm, Dmax=5.00mm, 11.0mm, 28mm, metal, 1pc.
NA1K/3-MET-ML 621-10103
Primerjava
Ne pozabite
1 pcs.
Metal (ML) NA1K/3-MET-ML 621-10103
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Primerjava
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 500pcs.
T50ROSFTM6SO12.5A-PA66HIRHS-GY 157-00118
Primerjava
Ne pozabite
500 pcs.
Grey (GY) T50ROSFTM6SO12.5A-PA66HIRHS-GY 157-00118
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 3000pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Primerjava
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 3000pcs.
T50ROSFT6SO25A-PA66HIRHS-GY 157-00119
Primerjava
Ne pozabite
3000 pcs.
Grey (GY) T50ROSFT6SO25A-PA66HIRHS-GY 157-00119
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Primerjava
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
T50ROSFT6SO25A-PA66HIRHSUV-BK 157-00150
Primerjava
Ne pozabite
500 pcs.
Black (BK) T50ROSFT6SO25A-PA66HIRHSUV-BK 157-00150
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 4000pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Primerjava
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 4000pcs.
T50ROSFT6SO12.5A-PA66HIRHSUV-BK 157-00145
Primerjava
Ne pozabite
4000 pcs.
Black (BK) T50ROSFT6SO12.5A-PA66HIRHSUV-BK 157-00145
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Primerjava
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
T50ROSFT6SO12.5B-PA66HIRHSUV-BK 157-00171
Primerjava
Ne pozabite
500 pcs.
Black (BK) T50ROSFT6SO12.5B-PA66HIRHSUV-BK 157-00171
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 3000pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Primerjava
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 3000pcs.
T50ROSFT6SO25B-PA66HIRHSUV-BK 157-00169
Primerjava
Ne pozabite
3000 pcs.
Black (BK) T50ROSFT6SO25B-PA66HIRHSUV-BK 157-00169
Fixing tie for hole (round), outside serrated, ⌀1.6-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Primerjava
Fixing tie for hole (round), outside serrated, ⌀1.6-50.0mm, black, 500pcs.
T50ROSFT6SO25R-PA66HIRHSUV-BK 157-00164
Primerjava
Ne pozabite
500 pcs.
Black (BK) T50ROSFT6SO25R-PA66HIRHSUV-BK 157-00164
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Primerjava
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
T50ROSFT6S25SO-PA66HIRHSUV-BK 157-00197
Primerjava
Ne pozabite
500 pcs.
Black (BK) T50ROSFT6S25SO-PA66HIRHSUV-BK 157-00197
Fixing tie for hole (round), outside serrated, ⌀1.6-30.0mm, black, 100pcs.
Friction tab inside of fir tree allows tie to sit in mount without falling out prior to installation.
Primerjava
Fixing tie for hole (round), outside serrated, ⌀1.6-30.0mm, black, 100pcs.
OS170-FT7-PA66-BK 157-00017
Primerjava
Ne pozabite
100 pcs.
Black (BK) OS170-FT7-PA66-BK 157-00017
Fixing tie for hole (round), outside serrated, ⌀1.6-30.0mm, black, 100pcs.
Primerjava
Fixing tie for hole (round), outside serrated, ⌀1.6-30.0mm, black, 100pcs.
OS170-FT7-LH-PA66-BK 157-00019
Primerjava
Ne pozabite
100 pcs.
Black (BK) OS170-FT7-LH-PA66-BK 157-00019
Fixing tie for hole (round), outside serrated, ⌀1.6-30mm, black, 100pcs.
Primerjava
Fixing tie for hole (round), outside serrated, ⌀1.6-30mm, black, 100pcs.
OS170-FT7-LH-PA66HSUV-BK 157-00122
Primerjava
Ne pozabite
100 pcs.
Black (BK) OS170-FT7-LH-PA66HSUV-BK 157-00122
Fixing tie with pipe/tube holder, ⌀20.0-25.0mm, black, 1000pcs.
The cable tie bundles wires, cables or tubes, and the C-clip snaps onto the tubular frame rail.
Primerjava
Fixing tie with pipe/tube holder, ⌀20.0-25.0mm, black, 1000pcs.
T50SMVCLOC20-25-PA66HIRHSUV-BK 156-01714
Primerjava
Ne pozabite
1000 pcs.
Black (BK) T50SMVCLOC20-25-PA66HIRHSUV-BK 156-01714
Fixing tie with pipe/tube holder, ⌀10.0-14.0mm, black, 1000pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Primerjava
Fixing tie with pipe/tube holder, ⌀10.0-14.0mm, black, 1000pcs.
T50SMVCLOC10-14-PA66HS/PA66HIRHSUV-BK 156-02383
Primerjava
Ne pozabite
1000 pcs.
Black (BK) T50SMVCLOC10-14-PA66HS/PA66HIRHSUV-BK 156-02383
Fixing tie for stud, inside serrated, ⌀2.0-45.0mm, black, 250pcs.
Cable ties with various weld stud fixing methods.
Primerjava
Fixing tie for stud, inside serrated, ⌀2.0-45.0mm, black, 250pcs.
T50RSB5-PA66/POM-BK 156-00742
Primerjava
Ne pozabite
250 pcs.
Black (BK) T50RSB5-PA66/POM-BK 156-00742
Fixing tie for stud, outside serrated, ⌀4.0-35.0mm, black, 250pcs.
Cable ties with various weld stud fixing methods.
Primerjava
Fixing tie for stud, outside serrated, ⌀4.0-35.0mm, black, 250pcs.
T50SOSSBS5-PA66HS-BK 156-01746
Primerjava
Ne pozabite
250 pcs.
Black (BK) T50SOSSBS5-PA66HS-BK 156-01746
Fixing tie for stud, outside serrated, ⌀32.0mm, black, 500pcs.
Cable ties with various weld stud fixing methods.
Primerjava
Fixing tie for stud, outside serrated, ⌀32.0mm, black, 500pcs.
T50SOSSBH5-PA66HS-BK 156-01744
Primerjava
Ne pozabite
500 pcs.
Black (BK) T50SOSSBH5-PA66HS-BK 156-01744
Fixing tie for hole (round), inside serrated, ⌀1-45.0mm, grey, 1000pcs.
Primerjava
Fixing tie for hole (round), inside serrated, ⌀1-45.0mm, grey, 1000pcs.
T50RDHA5.5x15-PA46-GY 156-01203
Primerjava
Ne pozabite
1000 pcs.
Grey (GY) T50RDHA5.5x15-PA46-GY 156-01203
Connector clip for hole (oval), EWCAP-005-23, black, 3500pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Primerjava
Connector clip for hole (oval), EWCAP-005-23, black, 3500pcs.
CCOVAL3-PA66HIRHSUV-BK 151-01244
Primerjava
Ne pozabite
3500 pcs.
Black (BK) CCOVAL3-PA66HIRHSUV-BK 151-01244
Connector clip for hole (oval), black, 5000pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Primerjava
Connector clip for hole (oval), black, 5000pcs.
CCOVAL4-PA66HIRHSUV-BK 151-01246
Primerjava
Ne pozabite
5000 pcs.
Black (BK) CCOVAL4-PA66HIRHSUV-BK 151-01246
Bundling clip for stud, L=55.0mm, SO=22.8mm, black, 1000pcs.
The slim line BC series is particularly compact and flexible.
Primerjava
Bundling clip for stud, L=55.0mm, SO=22.8mm, black, 1000pcs.
BC2212-PA66HIRHS-BK 151-00017
Primerjava
Ne pozabite
1000 pcs.
Black (BK) BC2212-PA66HIRHS-BK 151-00017
Heat Shrinkable Tubing 2:1 VG-Norm 1,2/0,6 brown
Primerjava
Heat Shrinkable Tubing 2:1 VG-Norm 1,2/0,6 brown
HFT-A-1.2/0.6-PO-X-BN 305-01201
Primerjava
Ne pozabite
100 metre
Brown (BN) HFT-A-1.2/0.6-PO-X-BN 305-01201
Heat Shrinkable Tubing 2:1 VG-Norm 1.6/0.8 brown
Primerjava
Heat Shrinkable Tubing 2:1 VG-Norm 1.6/0.8 brown
HFT-A-1.6/0.8-PO-X-BN 305-01601
Primerjava
Ne pozabite
100 metre
Brown (BN) HFT-A-1.6/0.8-PO-X-BN 305-01601
Heat shrinkable tubing 2:1 - flexible and coloured
Primerjava
Heat shrinkable tubing 2:1 - flexible and coloured
HFT-A-2.4/1.2-PO-X-BN 305-02401
Primerjava
Ne pozabite
100 m
Brown (BN) HFT-A-2.4/1.2-PO-X-BN 305-02401
Heat Shrinkable Tubing 2:1 VG-Norm 3.2/1.6 brown
Primerjava
Heat Shrinkable Tubing 2:1 VG-Norm 3.2/1.6 brown
HFT-A-3.2/1.6-PO-X-BN 305-03201
Primerjava
Ne pozabite
400 metre
Brown (BN) HFT-A-3.2/1.6-PO-X-BN 305-03201
Heat shrinkable tubing 2:1 - flexible and coloured
Primerjava
Heat shrinkable tubing 2:1 - flexible and coloured
HFT-A-4.8/2.4-PO-X-BN 305-04801
Primerjava
Ne pozabite
300 m
Brown (BN) HFT-A-4.8/2.4-PO-X-BN 305-04801
Heat Shrinkable Tubing 2:1 VG-Norm 4.8/2.4 green
Primerjava
Heat Shrinkable Tubing 2:1 VG-Norm 4.8/2.4 green
HFT-A-4.8/2.4-PO-X-GN 305-04805
Primerjava
Ne pozabite
300 metre
Green (GN) HFT-A-4.8/2.4-PO-X-GN 305-04805
Heat Shrinkable Tubing 2:1 4.8/2.4 grey
HFT-A conforms to major standards (VG) used in all Defence industries.
Primerjava
Heat Shrinkable Tubing 2:1 4.8/2.4 grey
HFT-A-4.8/2.4-PO-X-GY 305-04808
Primerjava
Ne pozabite
300 metre
Grey (GY) HFT-A-4.8/2.4-PO-X-GY 305-04808
Heat Shrinkable Tubing 2:1 VG-Norm 6.4/3.2 brown
Primerjava
Heat Shrinkable Tubing 2:1 VG-Norm 6.4/3.2 brown
HFT-A-6.4/3.2-PO-X-BN 305-06401
Primerjava
Ne pozabite
300 metre
Brown (BN) HFT-A-6.4/3.2-PO-X-BN 305-06401
Heat Shrinkable Tubing 2:1 6.4/3.2 green
Primerjava
Heat Shrinkable Tubing 2:1 6.4/3.2 green
HFT-A-6.4/3.2-PO-X-GN 305-06405
Primerjava
Ne pozabite
300 metre
Green (GN) HFT-A-6.4/3.2-PO-X-GN 305-06405
Heat Shrinkable Tubing 2:1 VG-Norm 9.5/4.8 brown
Primerjava
Heat Shrinkable Tubing 2:1 VG-Norm 9.5/4.8 brown
HFT-A-9.5/4.8-PO-X-BN 305-09501
Primerjava
Ne pozabite
150 metre
Brown (BN) HFT-A-9.5/4.8-PO-X-BN 305-09501
Heat Shrinkable Tubing 2:1 VG-Norm 9.5/4.8 green
Primerjava
Heat Shrinkable Tubing 2:1 VG-Norm 9.5/4.8 green
HFT-A-9.5/4.8-PO-X-GN 305-09505
Primerjava
Ne pozabite
150 metre
Green (GN) HFT-A-9.5/4.8-PO-X-GN 305-09505
Heat Shrinkable Tubing 2:1 VG-Norm 12.7/6.4 brown
Primerjava
Heat Shrinkable Tubing 2:1 VG-Norm 12.7/6.4 brown
HFT-A-12.7/6.4-PO-X-BN 305-12701
Primerjava
Ne pozabite
50 metre
Brown (BN) HFT-A-12.7/6.4-PO-X-BN 305-12701
Heat Shrinkable Tubing 2:1 VG-Norm 19.0/9.5 brown
Primerjava
Heat Shrinkable Tubing 2:1 VG-Norm 19.0/9.5 brown
HFT-A-19.0/9.5-PO-X-BN 305-19001
Primerjava
Ne pozabite
50 metre
Brown (BN) HFT-A-19.0/9.5-PO-X-BN 305-19001
Heat Shrinkable Tubing 2:1 VG-Norm 25.4/12.7 brown
Primerjava
Heat Shrinkable Tubing 2:1 VG-Norm 25.4/12.7 brown
HFT-A-25.4/12.7-PO-X-BN 305-25401
Primerjava
Ne pozabite
50 metre
Brown (BN) HFT-A-25.4/12.7-PO-X-BN 305-25401
Heat Shrinkable Tubing 2:1 VG-Norm 38.0/19.0 green/yellow
TFN21 - available in a wide range of colours and sizes.
Primerjava
Heat Shrinkable Tubing 2:1 VG-Norm 38.0/19.0 green/yellow
HFT-A-38.0/19.0-PO-X-GNYE 305-38145
Primerjava
Ne pozabite
50 metre
Green-Yellow (GNYE) HFT-A-38.0/19.0-PO-X-GNYE 305-38145
Heat shrinkable tubing 2:1 - flexible and coloured
Primerjava
Heat shrinkable tubing 2:1 - flexible and coloured
HFT-A-38.0/19.0-PO-X-BN 305-38101
Primerjava
Ne pozabite
50 m
Brown (BN) HFT-A-38.0/19.0-PO-X-BN 305-38101
Heat Shrinkable Tubing 2:1 38.0/19.0 green
Primerjava
Heat Shrinkable Tubing 2:1 38.0/19.0 green
HFT-A-38.0/19.0-PO-X-GN 305-38105
Primerjava
Ne pozabite
50 metre
Green (GN) HFT-A-38.0/19.0-PO-X-GN 305-38105
Heat Shrinkable Tubing 2:1 VG-Norm 50.8/25.4 brown
Primerjava
Heat Shrinkable Tubing 2:1 VG-Norm 50.8/25.4 brown
HFT-A-50.8/25.4-PO-X-BN 305-50801
Primerjava
Ne pozabite
35 metre
Brown (BN) HFT-A-50.8/25.4-PO-X-BN 305-50801
Heat Shrinkable Tubing 2:1 76.0/38.0 green
Primerjava
Heat Shrinkable Tubing 2:1 76.0/38.0 green
HFT-A-76.0/38.0-PO-X-GN 305-76205
Primerjava
Ne pozabite
25 metre
Green (GN) HFT-A-76.0/38.0-PO-X-GN 305-76205
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Primerjava
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-2.4/1.2-PO-X-CL 305-02419
Primerjava
Ne pozabite
100 m
Transparent (CL) HFT-B-2.4/1.2-PO-X-CL 305-02419
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Primerjava
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-19.0/9.5-PO-X-CL 305-19019
Primerjava
Ne pozabite
50 metre
Transparent (CL) HFT-B-19.0/9.5-PO-X-CL 305-19019
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Primerjava
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-25.4/12.7-PO-X-CL 305-25419
Primerjava
Ne pozabite
25 m
Transparent (CL) HFT-B-25.4/12.7-PO-X-CL 305-25419
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Primerjava
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-38.0/19.0-PO-X-CL 305-38119
Primerjava
Ne pozabite
50 m
Transparent (CL) HFT-B-38.0/19.0-PO-X-CL 305-38119
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Primerjava
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-1.6/0.8-PO-X-CL 305-01619
Primerjava
Ne pozabite
100 m
Transparent (CL) HFT-B-1.6/0.8-PO-X-CL 305-01619
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Primerjava
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-3.2/1.6-PO-X-CL 305-03219
Primerjava
Ne pozabite
100 m
Transparent (CL) HFT-B-3.2/1.6-PO-X-CL 305-03219
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Primerjava
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-4.8/2.4-PO-X-CL 305-04819
Primerjava
Ne pozabite
300 metre
Transparent (CL) HFT-B-4.8/2.4-PO-X-CL 305-04819
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Primerjava
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-12.7/6.4-PO-X-CL 305-12719
Primerjava
Ne pozabite
50 m
Transparent (CL) HFT-B-12.7/6.4-PO-X-CL 305-12719
End Cap with Thermoplastic Adhesive for Low Voltage black, PO-X, up to 3:1
The appropriate end cap for every cable diameter and cable types.
Primerjava
End Cap with Thermoplastic Adhesive for Low Voltage black, PO-X, up to 3:1
1612-1-B5W2-PO-X-BK 416-12046
Primerjava
Ne pozabite
1 pcs.
Black (BK) 1612-1-B5W2-PO-X-BK 416-12046
End Cap with Thermoplastic Adhesive for Low Voltage black
The appropriate end cap for every cable diameter and cable types.
Primerjava
End Cap with Thermoplastic Adhesive for Low Voltage black
1613-1-B5W2-PO-X-BK 416-13054
Primerjava
Ne pozabite
250 pcs.
Black (BK) 1613-1-B5W2-PO-X-BK 416-13054
End Cap with Thermoplastic Adhesive for Low Voltage black, PO-X, up to 3:1
The appropriate end cap for every cable diameter and cable types.
Primerjava
End Cap with Thermoplastic Adhesive for Low Voltage black, PO-X, up to 3:1
1615-1-B5W2-PO-X-BK 416-15035
Primerjava
Ne pozabite
1 pcs.
Black (BK) 1615-1-B5W2-PO-X-BK 416-15035
End Cap with Thermoplastic Adhesive for Low Voltage black, PO-X, up to 3:1
The appropriate end cap for every cable diameter and cable types.
Primerjava
End Cap with Thermoplastic Adhesive for Low Voltage black, PO-X, up to 3:1
1617-1-B5W2-PO-X-BK 416-17033
Primerjava
Ne pozabite
1 pcs.
Black (BK) 1617-1-B5W2-PO-X-BK 416-17033
End Cap with Thermoplastic Adhesive for Low Voltage black, PO-X, up to 3:1
The appropriate end cap for every cable diameter and cable types.
Primerjava
End Cap with Thermoplastic Adhesive for Low Voltage black, PO-X, up to 3:1
1614-1-B5W2-PO-X-BK 416-14047
Primerjava
Ne pozabite
300 pcs.
Black (BK) 1614-1-B5W2-PO-X-BK 416-14047
Cable clip, T=0.7 - 6.35mm, ⌀6.6 mm, Dmin=6.0mm, Dmax=7.6mm
The SC6.6 for solar cables is ideal for quick installation and easy maintenance.
Primerjava
Cable clip, T=0.7 - 6.35mm, ⌀6.6 mm, Dmin=6.0mm, Dmax=7.6mm
SC6.6-PA66HIRHSUV-BK 151-00927
Primerjava
Ne pozabite
100 pcs.
Black (BK) SC6.6-PA66HIRHSUV-BK 151-00927
Cable clip for hole (round), ⌀5.0 mm, Dmin=5.5mm, Dmax=6.7mm
Klam-Klips KK1 - 4.
Primerjava
Cable clip for hole (round), ⌀5.0 mm, Dmin=5.5mm, Dmax=6.7mm
KK2-PA6HIR-BK 234-10200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
500 pcs.
Black (BK) KK2-PA6HIR-BK 234-10200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for hole (round), ⌀5.0 mm, Dmin=7.5mm, Dmax=8.5mm
Klam-Klips KK1 - 4.
Primerjava
Cable clip for hole (round), ⌀5.0 mm, Dmin=7.5mm, Dmax=8.5mm
KK4-PA6HIR-BK 234-10400
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
500 pcs.
Black (BK) KK4-PA6HIR-BK 234-10400
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Primerjava
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Primerjava
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
50 pcs.
Black (BK) ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
50 pcs.
Black (BK) ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C P-Clamp with chloroprene insert.
Primerjava
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
50 pcs.
Black (BK) ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
50 pcs.
Black (BK) ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
50 pcs.
Black (BK) ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
50 pcs.
Black (BK) ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
50 pcs.
Black (BK) ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
50 pcs.
Black (BK) ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
50 pcs.
Black (BK) ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
50 pcs.
Black (BK) ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Primerjava
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Black (BK) ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Primerjava
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Primerjava
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Primerjava
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
100 pcs.
Natural (NA) ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.
Primerjava
Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.
SSPC6-SS316L-ML 151-00839
Primerjava
Ne pozabite
100 pcs.
Metal (ML) SSPC6-SS316L-ML 151-00839
Cable grommet, ⌀12.0 mm, black, 1000pcs.
Edge Protection Grommet - HV1204.
Primerjava
Cable grommet, ⌀12.0 mm, black, 1000pcs.
HV1204-PVC-FR-BK 633-02040
Primerjava
Ne pozabite
1000 pcs.
Black (BK) HV1204-PVC-FR-BK 633-02040
Cable grommet, ⌀9.0 mm, black, 1000pcs.
Edge Protection Grommet - HV1210.
Primerjava
Cable grommet, ⌀9.0 mm, black, 1000pcs.
HV1210-PVC-FR-BK 633-02100
Primerjava
Ne pozabite
1000 pcs.
Black (BK) HV1210-PVC-FR-BK 633-02100
Cable grommet, ⌀9.0 mm, black, 1000pcs.
Bend Protection Grommet - HV2101.
Primerjava
Cable grommet, ⌀9.0 mm, black, 1000pcs.
HV2101-PVC-FR-BK 632-01010
Primerjava
Ne pozabite
1000 pcs.
Black (BK) HV2101-PVC-FR-BK 632-01010
Fluoroelastomer Heat Shrinkable Tubing 2:1 3.2/1.6 black
Viton®-E for flexibility and protection against aggressive chemicals.
Primerjava
Fluoroelastomer Heat Shrinkable Tubing 2:1 3.2/1.6 black
VITON®-E-3.2/1.6-FPMX-BK 330-00320
Primerjava
Ne pozabite
50 metre
Black (BK) VITON®-E-3.2/1.6-FPMX-BK 330-00320
Fluoroelastomer Heat Shrinkable Tubing 2:1 9.5/4.8 black
Viton®-E for flexibility and protection against aggressive chemicals.
Primerjava
Fluoroelastomer Heat Shrinkable Tubing 2:1 9.5/4.8 black
VITON®-E-9.5/4.8-FPMX-BK 330-00950
Primerjava
Ne pozabite
25 metre
Black (BK) VITON®-E-9.5/4.8-FPMX-BK 330-00950
Fluoroelastomer Heat Shrinkable Tubing 2:1 25.4/12.7 black
Viton®-E for flexibility and protection against aggressive chemicals.
Primerjava
Fluoroelastomer Heat Shrinkable Tubing 2:1 25.4/12.7 black
VITON®-E-25.4/12.7-FPMX-BK 330-02540
Primerjava
Ne pozabite
25 metre
Black (BK) VITON®-E-25.4/12.7-FPMX-BK 330-02540
Fluoroelastomer Heat Shrinkable Tubing 2:1 38.0/19.0 black
Viton®-E for flexibility and protection against aggressive chemicals.
Primerjava
Fluoroelastomer Heat Shrinkable Tubing 2:1 38.0/19.0 black
VITON®-E-38.0/19.0-FPMX-BK 330-03810
Primerjava
Ne pozabite
15 metre
Black (BK) VITON®-E-38.0/19.0-FPMX-BK 330-03810
Thin Wall Heat Shrinkable Tubing 3:1 with Adhesive Liner 3/1 black
EPS300 and EPS400 offer high shrink ratios and protection against humidity.
Primerjava
Thin Wall Heat Shrinkable Tubing 3:1 with Adhesive Liner 3/1 black
EPS-300-3/1-PO-X-BK 340-03010
Primerjava
Ne pozabite
400 metre
Black (BK) EPS-300-3/1-PO-X-BK 340-03010
Thin Wall Heat Shrinkable Tubing 3:1 with Adhesive Liner 12/4 black
EPS300 and EPS400 offer high shrink ratios and protection against humidity.
Primerjava
Thin Wall Heat Shrinkable Tubing 3:1 with Adhesive Liner 12/4 black
EPS-300-12/4-PO-X-BK 340-12040
Primerjava
Ne pozabite
100 metre
Black (BK) EPS-300-12/4-PO-X-BK 340-12040
Thin Wall Heat Shrinkable Tubing 3:1 with Adhesive Liner 24/8 black
EPS300 and EPS400 offer high shrink ratios and protection against humidity.
Primerjava
Thin Wall Heat Shrinkable Tubing 3:1 with Adhesive Liner 24/8 black
EPS-300-24/8-PO-X-BK 340-24080
Primerjava
Ne pozabite
25 metre
Black (BK) EPS-300-24/8-PO-X-BK 340-24080
Thin Wall Heat Shrinkable Tubing 3:1 with Adhesive Liner 40/13 black
EPS300 and EPS400 offer high shrink ratios and protection against humidity.
Primerjava
Thin Wall Heat Shrinkable Tubing 3:1 with Adhesive Liner 40/13 black
EPS-300-40/13-PO-X-BK 340-40130
Primerjava
Ne pozabite
25 metre
Black (BK) EPS-300-40/13-PO-X-BK 340-40130
Heat Shrink Cable Joint Kit 16-50mm² with Connector Voltage Range 0.6/1 kV
LVK-C: Outer sleeve, inner sleeves, mechanical connectors, cleaning cloth, emery cloth, installation instructions.
Primerjava
Heat Shrink Cable Joint Kit 16-50mm² with Connector Voltage Range 0.6/1 kV
LVK-C-4x16-50-PO-X-BK 380-04016
Primerjava
Ne pozabite
1 pcs.
Black (BK) LVK-C-4x16-50-PO-X-BK 380-04016
Heat Shrink Cable Joint Kit 25-150mm² with Connector Voltage Range 0.6/1 kV
LVK-C: Outer sleeve, inner sleeves, mechanical connectors, cleaning cloth, emery cloth, installation instructions.
Primerjava
Heat Shrink Cable Joint Kit 25-150mm² with Connector Voltage Range 0.6/1 kV
LVK-C-4x25-150-PO-X-BK 380-04018
Primerjava
Ne pozabite
1 pack
Black (BK) LVK-C-4x25-150-PO-X-BK 380-04018
Releasable cable tie, 880x28.0mm, ⌀240mm, 360N, black, 180pcs.
The elasticity of the SOFTIX ties makes them suitable for use in many applications.
Primerjava
Releasable cable tie, 880x28.0mm, ⌀240mm, 360N, black, 180pcs.
SRT88028-TPU-BK 115-28889
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Primerjava
Ne pozabite
1 pcs.
Black (BK) SRT88028-TPU-BK 115-28889
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, not serrated, ⌀6.0-23.0mm, black, 500pcs.
FBB one-piece fixing ties for weld studs, can be easly removed by unscrewing in an anti-clockwise direction.
Primerjava
Fixing tie for stud, not serrated, ⌀6.0-23.0mm, black, 500pcs.
FBB100M-PA66HS-BK 150-29100
Primerjava
Ne pozabite
500 pcs.
Black (BK) FBB100M-PA66HS-BK 150-29100
Fixing tie for stud, not serrated, ⌀6.0-50.0mm, black, 500pcs.
FBB one-piece fixing ties for weld studs, can be easly removed by unscrewing in an anti-clockwise direction.
Primerjava
Fixing tie for stud, not serrated, ⌀6.0-50.0mm, black, 500pcs.
FBB185M-PA66HS-BK 150-29180
Primerjava
Ne pozabite
500 pcs.
Black (BK) FBB185M-PA66HS-BK 150-29180
Fixing tie for stud, inside serrated, ⌀3.0-40.0mm, grey, 500pcs.
SBR8S for M8 threaded studs.
Primerjava
Fixing tie for stud, inside serrated, ⌀3.0-40.0mm, grey, 500pcs.
SBR8S-PA46-GY 131-60058
Primerjava
Ne pozabite
500 pcs.
Grey (GY) SBR8S-PA46-GY 131-60058
Fixing tie for stud, inside serrated, ⌀9.5-57.1mm, black, 300pcs.
Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.
Primerjava
Fixing tie for stud, inside serrated, ⌀9.5-57.1mm, black, 300pcs.
WSS8MM-PA66HIRHSW-BK 157-00034
Primerjava
Ne pozabite
300 pcs.
Black (BK) WSS8MM-PA66HIRHSW-BK 157-00034
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
Primerjava
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
T50SOSSBD-M6-PA66HSUV-BK 157-00038
Primerjava
Ne pozabite
100 pcs.
Black (BK) T50SOSSBD-M6-PA66HSUV-BK 157-00038
Facebook  Instagram  X  YouTube  LinkedIn  Link Corporate Blog 
Kontakt Pogoji Podatki o podjetju Navodila in zaveze Izjava o zasebnosti Zemljevid spletnega mesta Novice
Update: 31/08/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.286.1) | Update: 31/08/2025 | Nastavitve zasebnosti
Iskanje prodajalca Kontakt