Výsledky pro "igh temperature heat shrink tubing" v Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Poznámka: Kombinace hledaných výrazů nevrátila žádné odpovídající výsledky. Níže jsou výsledky, které odpovídají dílům dle Vašeho vyhledávání.

Typ: Zkuste změnit nebo odstranit výrazy, abyste zlepšili relevanci výsledků vyhledávání.

Pohled inženýra

Sustainable

Pohled inženýra

Sustainable

Resetovat vše

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Porovnat

H7P-PA66HS-BK 211-60006

Porovnat

Přidat do sledovaných položek

Designed with radiused edges to prevent chafing and cutting into insulation.

Porovnat

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) H7P-PA66HS-BK 211-60006

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

ALU11-AL-NA 211-10110

Porovnat

Přidat do sledovaných položek

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Natural (NA) ALU11-AL-NA 211-10110

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU17C-AL/CR-BK 211-15170

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU17C-AL/CR-BK 211-15170

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU19C-AL/CR-BK 211-15190

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU19C-AL/CR-BK 211-15190

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

ALU23C P-Clamp with chloroprene insert.

Porovnat

ALU23C-AL/CR-BK 211-15230

Porovnat

Přidat do sledovaných položek

ALU23C P-Clamp with chloroprene insert.

Porovnat

P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU23C-AL/CR-BK 211-15230

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU24C-AL/CR-BK 211-15240

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU24C-AL/CR-BK 211-15240

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU25C-AL/CR-BK 211-15250

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU25C-AL/CR-BK 211-15250

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU26C-AL/CR-BK 211-15260

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU26C-AL/CR-BK 211-15260

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU28C-AL/CR-BK 211-15280

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU28C-AL/CR-BK 211-15280

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU29C-AL/CR-BK 211-15290

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU29C-AL/CR-BK 211-15290

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU30C-AL/CR-BK 211-15300

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU30C-AL/CR-BK 211-15300

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU34C-AL/CR-BK 211-15340

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU34C-AL/CR-BK 211-15340

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

ALU8-AL-NA 211-10080

Porovnat

Přidat do sledovaných položek

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Natural (NA) ALU8-AL-NA 211-10080

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.3 mm, M4 Screw, beige, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

CTAM mounts for applications with limited space.

Porovnat

CTAM1-PEEK-BGE 151-00757

Porovnat

Přidat do sledovaných položek

CTAM mounts for applications with limited space.

Porovnat

Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.3 mm, M4 Screw, beige, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Beige (BGE) CTAM1-PEEK-BGE 151-00757

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie outside serrated, 250.0x4.65mm, ⌀4.0-65.0mm, beige, 100pcs.

PT2A PEEK cable tie for extreme temperature range for excellent performance in a range of environments.

Porovnat

PT3B-PEEK-BGE 118-00116

Porovnat

Přidat do sledovaných položek

PT2A PEEK cable tie for extreme temperature range for excellent performance in a range of environments.

Porovnat

Cable tie outside serrated, 250.0x4.65mm, ⌀4.0-65.0mm, beige, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Beige (BGE) PT3B-PEEK-BGE 118-00116

Fixing tie for edge, inside serrated, ⌀1.0-18.0mm, black, 5000pcs.

2-piece fixing tie for edges 1-3 mm, side fixation.

Porovnat

T18REC21-PA66W/PA66HIRHS-BK 156-01231

Porovnat

Přidat do sledovaných položek

2-piece fixing tie for edges 1-3 mm, side fixation.

Porovnat

Fixing tie for edge, inside serrated, ⌀1.0-18.0mm, black, 5000pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) T18REC21-PA66W/PA66HIRHS-BK 156-01231

Cable clip for hole (round), ⌀7.8 - 8.2 mm

Porovnat

CTCLPROFILE-PA66HIRHS-BK 151-00026

Porovnat

Přidat do sledovaných položek

Porovnat

Cable clip for hole (round), ⌀7.8 - 8.2 mm

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) CTCLPROFILE-PA66HIRHS-BK 151-00026

Fixing tie for hole (round), outside serrated, ⌀1.0-45.0mm, grey/beige, 100pcs.

The fixing tie T50ROSP1SFT6.5 for high temperature applications.

Porovnat

T50ROSP1SFT6.5-PA46/PEEK-GY/BGE 156-00455

Porovnat

Přidat do sledovaných položek

The fixing tie T50ROSP1SFT6.5 for high temperature applications.

Porovnat

Fixing tie for hole (round), outside serrated, ⌀1.0-45.0mm, grey/beige, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Grey (GY), Beige (BGE) T50ROSP1SFT6.5-PA46/PEEK-GY/BGE 156-00455

Fixing tie for hole (round), outside serrated, ⌀1.0-45.0mm, grey/beige, 100pcs.

Porovnat

T50ROSP2SFT6.5-PA46/PEEK-GY/BGE 156-00456

Porovnat

Přidat do sledovaných položek

Porovnat

Fixing tie for hole (round), outside serrated, ⌀1.0-45.0mm, grey/beige, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Grey (GY), Beige (BGE) T50ROSP2SFT6.5-PA46/PEEK-GY/BGE 156-00456

Cable tie mount for screw fixation, Wmax=5.0mm, ⌀5.1 mm, M5 Screw, beige, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

CTAM mounts for applications with limited space.

Porovnat

CTAM2-PEEK-BGE 151-00758

Porovnat

Přidat do sledovaných položek

CTAM mounts for applications with limited space.

Porovnat

Cable tie mount for screw fixation, Wmax=5.0mm, ⌀5.1 mm, M5 Screw, beige, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Beige (BGE) CTAM2-PEEK-BGE 151-00758

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie inside serrated, 205x4.7mm, ⌀1.5-45.0mm, black, 100pcs.

The Clamp Tie head design contains clamping rails to provide full circumferential compression around bundles.

Porovnat

CTT60R-PA66HS-BK 112-52112

Porovnat

Přidat do sledovaných položek

The Clamp Tie head design contains clamping rails to provide full circumferential compression around bundles.

Porovnat

Cable tie inside serrated, 205x4.7mm, ⌀1.5-45.0mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) CTT60R-PA66HS-BK 112-52112

Fixing tie for edge, inside serrated, ⌀1.2-45.0mm, black, 500pcs.

Porovnat

T50REC9-PA66HS/PA66HIRHS-BK 156-01280

Porovnat

Přidat do sledovaných položek

Porovnat

Fixing tie for edge, inside serrated, ⌀1.2-45.0mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) T50REC9-PA66HS/PA66HIRHS-BK 156-01280

Fixing tie for edge, inside serrated, ⌀1.5-32.0mm, black, 500pcs.

Push-mount rotating edge clip provides flexible routing of cable bundles.

Porovnat

CBT30MR-PA66HS/POM-BK 156-00049

Porovnat

Přidat do sledovaných položek

Push-mount rotating edge clip provides flexible routing of cable bundles.

Porovnat

Fixing tie for edge, inside serrated, ⌀1.5-32.0mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) CBT30MR-PA66HS/POM-BK 156-00049

P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Porovnat

H2P-PA66HS-BK 211-60001

Porovnat

Přidat do sledovaných položek

Designed with radiused edges to prevent chafing and cutting into insulation.

Porovnat

P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) H2P-PA66HS-BK 211-60001

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Porovnat

H5P-PA66HS-BK 211-60004

Porovnat

Přidat do sledovaných položek

P-Clamps H1P - H18P in different dimensions.

Porovnat

P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) H5P-PA66HS-BK 211-60004

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

ALU10-AL-NA 211-10100

Porovnat

Přidat do sledovaných položek

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Natural (NA) ALU10-AL-NA 211-10100

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU11C-AL/CR-BK 211-15110

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU11C-AL/CR-BK 211-15110

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU13C-AL/CR-BK 211-15130

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU13C-AL/CR-BK 211-15130

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU14C-AL/CR-BK 211-15140

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU14C-AL/CR-BK 211-15140

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU16C-AL/CR-BK 211-15160

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU16C-AL/CR-BK 211-15160

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU18C-AL/CR-BK 211-15180

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU18C-AL/CR-BK 211-15180

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU20C-AL/CR-BK 211-15200

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU20C-AL/CR-BK 211-15200

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU22C-AL/CR-BK 211-15220

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU22C-AL/CR-BK 211-15220

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

ALU4-AL-NA 211-10040

Porovnat

Přidat do sledovaných položek

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Natural (NA) ALU4-AL-NA 211-10040

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU4C-AL/CR-BK 211-15040

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU4C-AL/CR-BK 211-15040

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

ALU5-AL-NA 211-10050

Porovnat

Přidat do sledovaných položek

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Natural (NA) ALU5-AL-NA 211-10050

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU5C-AL/CR-BK 211-15050

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU5C-AL/CR-BK 211-15050

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

ALU7-AL-NA 211-10070

Porovnat

Přidat do sledovaných položek

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Natural (NA) ALU7-AL-NA 211-10070

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

ALU6-AL-NA 211-10060

Porovnat

Přidat do sledovaných položek

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Natural (NA) ALU6-AL-NA 211-10060

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie for edge, inside serrated, ⌀1.0-45.0mm, black, 500pcs.

2-piece fixing tie for edges 1-3 mm, side fixation.

Porovnat

T50REC22-PA66W/PA66HIRHS-BK 156-00576

Porovnat

Přidat do sledovaných položek

2-piece fixing tie for edges 1-3 mm, side fixation.

Porovnat

Fixing tie for edge, inside serrated, ⌀1.0-45.0mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) T50REC22-PA66W/PA66HIRHS-BK 156-00576

Fixing tie for edge, inside serrated, ⌀4.0-33.0mm, black, 500pcs.

2-piece fixing tie for edges 1 - 3 mm and harness routing on top parallel to the edge.

Porovnat

T30REC4A-PA66HS/PA66HIRHS-BK 150-76090

Porovnat

Přidat do sledovaných položek

2-piece fixing tie for edges 1 - 3 mm and harness routing on top parallel to the edge.

Porovnat

Fixing tie for edge, inside serrated, ⌀4.0-33.0mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) T30REC4A-PA66HS/PA66HIRHS-BK 150-76090

Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.

Two piece assembly allows the edge clip to slide along the cable tie strap to ensure proper orientation.

Porovnat

T50ROSEC9-PA66HS/PA66HIRHS-BK 156-05903

Porovnat

Přidat do sledovaných položek

Two piece assembly allows the edge clip to slide along the cable tie strap to ensure proper orientation.

Porovnat

Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) T50ROSEC9-PA66HS/PA66HIRHS-BK 156-05903

Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.

2-piece fixing tie with EdgeClip for side cable routing.

Porovnat

T50ROSEC5B-PA66HS/PA66HIRHS-BK 150-40581

Porovnat

Přidat do sledovaných položek

2-piece fixing tie with EdgeClip for side cable routing.

Porovnat

Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) T50ROSEC5B-PA66HS/PA66HIRHS-BK 150-40581

Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.

Porovnat

T50ROSEC20-PA66HS/PA66HIRHS-BK 156-00020

Porovnat

Přidat do sledovaných položek

Porovnat

Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) T50ROSEC20-PA66HS/PA66HIRHS-BK 156-00020

Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.

Fixing tie for edge, outside serrated

Porovnat

T50ROSEC23-PA66HS/PA66HIRHS-BK 156-00006

Porovnat

Přidat do sledovaných položek

Fixing tie for edge, outside serrated

Porovnat

Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) T50ROSEC23-PA66HS/PA66HIRHS-BK 156-00006

Fixing tie for edge, inside serrated, ⌀4.0-19.0mm, black, 500pcs.

Edge Clip 10 (EC10) fitted onto a plastic panel to hold a ⌀ 6 mm harness.

Porovnat

T50RDHEC4A-PA66HS/PA66HIRHS-BK 156-01721

Porovnat

Přidat do sledovaných položek

Edge Clip 10 (EC10) fitted onto a plastic panel to hold a ⌀ 6 mm harness.

Porovnat

Fixing tie for edge, inside serrated, ⌀4.0-19.0mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) T50RDHEC4A-PA66HS/PA66HIRHS-BK 156-01721

Cable tie inside serrated, 100x2.5mm, ⌀1.6-13.0mm, black, 1000pcs.

The Clamp Tie head design contains clamping rails to provide full circumferential compression around bundles.

Porovnat

CTT20R-PA66HS-BK 112-51960

Porovnat

Přidat do sledovaných položek

The Clamp Tie head design contains clamping rails to provide full circumferential compression around bundles.

Porovnat

Cable tie inside serrated, 100x2.5mm, ⌀1.6-13.0mm, black, 1000pcs.

Porovnat

Přidat do sledovaných položek

1000 pcs.

Black (BK) CTT20R-PA66HS-BK 112-51960

Cable tie inside serrated, 383.5x12.7mm, ⌀9.5-105.0mm, black, 300pcs.

Porovnat

WSR-PA66HIRHSUV-BK 111-12302

Porovnat

Přidat do sledovaných položek

Porovnat

Cable tie inside serrated, 383.5x12.7mm, ⌀9.5-105.0mm, black, 300pcs.

Porovnat

Přidat do sledovaných položek

300 pcs.

Black (BK) WSR-PA66HIRHSUV-BK 111-12302

Cable tie not serrated vibration absorbing, 500x8.0mm, ⌀152mm, natural, 50pcs.

KR-Series is available in different sizes.

Porovnat

KR8/50-PA66HS-NA 121-05051

Porovnat

Přidat do sledovaných položek

KR-Series is available in different sizes.

Porovnat

Cable tie not serrated vibration absorbing, 500x8.0mm, ⌀152mm, natural, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Natural (NA) KR8/50-PA66HS-NA 121-05051

Cable tie inside serrated, 202x4.6mm, ⌀1.5-50.0mm, grey, 100pcs.

Porovnat

T50R-PA46-GY 111-00824

Porovnat

Přidat do sledovaných položek

Porovnat

Cable tie inside serrated, 202x4.6mm, ⌀1.5-50.0mm, grey, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Grey (GY) T50R-PA46-GY 111-00824

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU12C-AL/CR-BK 211-15120

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU12C-AL/CR-BK 211-15120

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU15C-AL/CR-BK 211-15150

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU15C-AL/CR-BK 211-15150

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU6C-AL/CR-BK 211-15060

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU6C-AL/CR-BK 211-15060

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU7C-AL/CR-BK 211-15070

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU7C-AL/CR-BK 211-15070

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU8C-AL/CR-BK 211-15080

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU8C-AL/CR-BK 211-15080

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU9C-AL/CR-BK 211-15090

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU9C-AL/CR-BK 211-15090

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie for edge, outside serrated, ⌀45.0mm, black, 1000pcs.

Porovnat

T50ROSEC3-6SV19-PA66HIRHS-BK 156-02754

Porovnat

Přidat do sledovaných položek

Porovnat

Fixing tie for edge, outside serrated, ⌀45.0mm, black, 1000pcs.

Porovnat

Přidat do sledovaných položek

1000 pcs.

Black (BK) T50ROSEC3-6SV19-PA66HIRHS-BK 156-02754

Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.

Fixing tie with EdgeClip for bundling cables above and parlell to the edge.

Porovnat

T50ROSEC10-PA66HS/PA66HIRHS-BK 156-05904

Porovnat

Přidat do sledovaných položek

Fixing tie with EdgeClip for bundling cables above and parlell to the edge.

Porovnat

Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) T50ROSEC10-PA66HS/PA66HIRHS-BK 156-05904

Cable tie inside serrated, 150x3.5mm, ⌀1.5-35.0mm, natural, 100pcs.

Porovnat

T30R-PA46-NA 114-03079

Porovnat

Přidat do sledovaných položek

Porovnat

Cable tie inside serrated, 150x3.5mm, ⌀1.5-35.0mm, natural, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Natural (NA) T30R-PA46-NA 114-03079

Cable tie inside serrated, 202x4.6mm, ⌀1.5-50.0mm, natural, 100pcs.

Porovnat

T50R-PA46-NA 111-00525

Porovnat

Přidat do sledovaných položek

Porovnat

Cable tie inside serrated, 202x4.6mm, ⌀1.5-50.0mm, natural, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Natural (NA) T50R-PA46-NA 111-00525

Cable tie outside serrated, 145.0x3.4mm, ⌀4.0-35.0mm, beige, 100pcs.

PT2A PEEK cable tie for extreme temperature range for excellent performance in a range of environments.

Porovnat

PT2A-PEEK-BGE 118-00032

Porovnat

Přidat do sledovaných položek

PT2A PEEK cable tie for extreme temperature range for excellent performance in a range of environments.

Porovnat

Cable tie outside serrated, 145.0x3.4mm, ⌀4.0-35.0mm, beige, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Beige (BGE) PT2A-PEEK-BGE 118-00032

Cable tie inside serrated, 230.0x12.7mm, ⌀9.5-57.1mm, black, 300pcs.

Porovnat

WSS-PA66HIRHSUV-BK 111-12300

Porovnat

Přidat do sledovaných položek

Porovnat

Cable tie inside serrated, 230.0x12.7mm, ⌀9.5-57.1mm, black, 300pcs.

Porovnat

Přidat do sledovaných položek

300 pcs.

Black (BK) WSS-PA66HIRHSUV-BK 111-12300

Cable tie not serrated vibration absorbing, 337.0x8.0mm, ⌀8.0-86.0mm, black, 50pcs.

Cable Ties KR-Series

Porovnat

KR8/33-PA66HS-BK 121-73390

Porovnat

Přidat do sledovaných položek

Cable Ties KR-Series

Porovnat

Cable tie not serrated vibration absorbing, 337.0x8.0mm, ⌀8.0-86.0mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) KR8/33-PA66HS-BK 121-73390

Harness Clip, automatic close, round hole 6.4 - 7.0 mm, fir tree, high impact modified, heat stabilised, black

Porovnat

AHC336FT6LG-PA66HIRHS-BK 151-01376

Porovnat

Přidat do sledovaných položek

Porovnat

Harness Clip, automatic close, round hole 6.4 - 7.0 mm, fir tree, high impact modified, heat stabilised, black

Porovnat

Přidat do sledovaných položek

700 pcs.

Black (BK) AHC336FT6LG-PA66HIRHS-BK 151-01376

Stainless steel cable tie, punch lock, 207x5.9mm, ⌀5-50.0mm, metal, 100pcs.

Metal cable ties MST-Series.

Porovnat

MST200S-SS304-ML 111-01549

Porovnat

Přidat do sledovaných položek

Metal cable ties MST-Series.

Porovnat

Stainless steel cable tie, punch lock, 207x5.9mm, ⌀5-50.0mm, metal, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Metal (ML) MST200S-SS304-ML 111-01549

Stainless steel cable tie, punch lock, 360x5.9mm, ⌀5-100mm, metal, 100pcs.

Metal cable ties MST-Series.

Porovnat

MST360S-SS304-ML 111-01550

Porovnat

Přidat do sledovaných položek

Metal cable ties MST-Series.

Porovnat

Stainless steel cable tie, punch lock, 360x5.9mm, ⌀5-100mm, metal, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Metal (ML) MST360S-SS304-ML 111-01550

Stainless steel cable tie, punch lock, 500x5.9mm, ⌀5-145mm, metal, 100pcs.

Metal cable ties MST-Series.

Porovnat

MST500S-SS304-ML 111-01551

Porovnat

Přidat do sledovaných položek

Metal cable ties MST-Series.

Porovnat

Stainless steel cable tie, punch lock, 500x5.9mm, ⌀5-145mm, metal, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Metal (ML) MST500S-SS304-ML 111-01551

Stainless steel cable tie, punch lock, 700x5.9mm, ⌀5-205mm, metal, 100pcs.

Metal cable ties MST-Series.

Porovnat

MST700S-SS304-ML 111-01552

Porovnat

Přidat do sledovaných položek

Metal cable ties MST-Series.

Porovnat

Stainless steel cable tie, punch lock, 700x5.9mm, ⌀5-205mm, metal, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Metal (ML) MST700S-SS304-ML 111-01552

Stainless steel cable tie, punch lock, 369x8.9mm, ⌀8-100.0mm, metal, 50pcs.

Metal cable ties MST-Series.

Porovnat

MST360M-SS304-ML 111-01631

Porovnat

Přidat do sledovaných položek

Metal cable ties MST-Series.

Porovnat

Stainless steel cable tie, punch lock, 369x8.9mm, ⌀8-100.0mm, metal, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Metal (ML) MST360M-SS304-ML 111-01631

Stainless steel cable tie, punch lock, 509x8.9mm, ⌀8-145mm, metal, 50pcs.

Metal cable ties MST-Series.

Porovnat

MST500M-SS304-ML 111-01632

Porovnat

Přidat do sledovaných položek

Metal cable ties MST-Series.

Porovnat

Stainless steel cable tie, punch lock, 509x8.9mm, ⌀8-145mm, metal, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Metal (ML) MST500M-SS304-ML 111-01632

Stainless steel cable tie, punch lock, 700x8.9mm, ⌀8-205mm, metal, 50pcs.

Metal cable ties MST-Series.

Porovnat

MST700M-SS304-ML 111-01633

Porovnat

Přidat do sledovaných položek

Metal cable ties MST-Series.

Porovnat

Stainless steel cable tie, punch lock, 700x8.9mm, ⌀8-205mm, metal, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Metal (ML) MST700M-SS304-ML 111-01633

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU10C-CR/AL-BK 211-15100

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU10C-CR/AL-BK 211-15100

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.

Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.

Porovnat

T50ROSEC5A-PA66HS/PA66HIRHS-BK 150-40591

Porovnat

Přidat do sledovaných položek

Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.

Porovnat

Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) T50ROSEC5A-PA66HS/PA66HIRHS-BK 150-40591

Bundling Clip 34x10 mm, automatic locking, high impact modified, heat stabilised, black

Porovnat

AHC25FT6LG-PA66HIRHS-BK 151-01198

Porovnat

Přidat do sledovaných položek

Porovnat

Bundling Clip 34x10 mm, automatic locking, high impact modified, heat stabilised, black

Porovnat

Přidat do sledovaných položek

1300 pcs.

Black (BK) AHC25FT6LG-PA66HIRHS-BK 151-01198

Fixing element 35x10 mm, high impact modified, heat stabilised, black

Porovnat

AHC223FT6LG-PA66HIRHS-BK 151-01078

Porovnat

Přidat do sledovaných položek

Porovnat

Fixing element 35x10 mm, high impact modified, heat stabilised, black

Porovnat

Přidat do sledovaných položek

1300 pcs.

Black (BK) AHC223FT6LG-PA66HIRHS-BK 151-01078

Cable tie not serrated vibration absorbing, 426x8.0mm, ⌀8.0-105mm, black, 50pcs.

Cable Ties KR-Series

Porovnat

KR8/43-PA66HS-BK 121-74360

Porovnat

Přidat do sledovaných položek

Cable Ties KR-Series

Porovnat

Cable tie not serrated vibration absorbing, 426x8.0mm, ⌀8.0-105mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) KR8/43-PA66HS-BK 121-74360

Cable tie not serrated vibration absorbing, 38.0x11.7mm, natural, 200pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable Tie Mounts KR8

Porovnat

KR8/C5-PA66HS-NA 121-58551

Porovnat

Přidat do sledovaných položek

Cable Tie Mounts KR8

Porovnat

Cable tie not serrated vibration absorbing, 38.0x11.7mm, natural, 200pcs.

Porovnat

Přidat do sledovaných položek

200 pcs.

Natural (NA) KR8/C5-PA66HS-NA 121-58551

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie not serrated, 50.0mx8.0mm, natural, 50.0m

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

KR8/S1 Endless Cable Tie Strap System

Porovnat

KR8/S1-PA66HS-NA 121-98151

Porovnat

Přidat do sledovaných položek

KR8/S1 Endless Cable Tie Strap System

Porovnat

Cable tie not serrated, 50.0mx8.0mm, natural, 50.0m

Porovnat

Přidat do sledovaných položek

50 reel

Natural (NA) KR8/S1-PA66HS-NA 121-98151

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie for hole (round), outside serrated, ⌀4.0-35.0mm, beige, 500pcs.

2-piece fixing element (PEEK) with arrow head for round holes and high temperature applications.

Porovnat

PT2AP1SFT6.5-PEEK-BGE 156-01090

Porovnat

Přidat do sledovaných položek

2-piece fixing element (PEEK) with arrow head for round holes and high temperature applications.

Porovnat

Fixing tie for hole (round), outside serrated, ⌀4.0-35.0mm, beige, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Beige (BGE) PT2AP1SFT6.5-PEEK-BGE 156-01090

Fixing tie for hole (round), outside serrated, ⌀4.0-35.0mm, beige, 500pcs.

2-piece fixing element (PEEK) with arrow head for round holes and high temperature applications.

Porovnat

PT2AP2SFT6.5-PEEK-BGE 156-01091

Porovnat

Přidat do sledovaných položek

2-piece fixing element (PEEK) with arrow head for round holes and high temperature applications.

Porovnat

Fixing tie for hole (round), outside serrated, ⌀4.0-35.0mm, beige, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Beige (BGE) PT2AP2SFT6.5-PEEK-BGE 156-01091

Fixing tie for hole (round), outside serrated, ⌀1.0-32.0mm, beige, 100pcs.

PEEK Fixing Ties can be used for small diameters from 1.0 mm.

Porovnat

PT2AP3SFT6.5-PEEK-BGE 156-01146

Porovnat

Přidat do sledovaných položek

PEEK Fixing Ties can be used for small diameters from 1.0 mm.

Porovnat

Fixing tie for hole (round), outside serrated, ⌀1.0-32.0mm, beige, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Beige (BGE) PT2AP3SFT6.5-PEEK-BGE 156-01146

Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.

Cable tie with edge clip.

Porovnat

T50ROSEC4A-PA66HS/PA66HIRHS-BK 150-76099

Porovnat

Přidat do sledovaných položek

Cable tie with edge clip.

Porovnat

Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) T50ROSEC4A-PA66HS/PA66HIRHS-BK 150-76099

Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.

Porovnat

T50ROSEC4B-PA66HS/PA66HIRHS-BK 150-76079

Porovnat

Přidat do sledovaných položek

Porovnat

Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) T50ROSEC4B-PA66HS/PA66HIRHS-BK 150-76079

Fixing tie for stud, inside serrated, ⌀6.4-58.0mm, black, 500pcs.

Provides dual separation between bundles to prevent chafing and abrasion.

Porovnat

DCT11-PA66HIRHSUV-BK 115-31101

Porovnat

Přidat do sledovaných položek

Provides dual separation between bundles to prevent chafing and abrasion.

Porovnat

Fixing tie for stud, inside serrated, ⌀6.4-58.0mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 bag

Black (BK) DCT11-PA66HIRHSUV-BK 115-31101

Fixing tie for stud, inside serrated, ⌀6.4-58.0mm, black, 100pcs.

Provides dual separation between bundles to prevent chafing and abrasion.

Porovnat

DCT11-PA66HIRHSUV-BK 115-00144

Porovnat

Přidat do sledovaných položek

Provides dual separation between bundles to prevent chafing and abrasion.

Porovnat

Fixing tie for stud, inside serrated, ⌀6.4-58.0mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 bag

Black (BK) DCT11-PA66HIRHSUV-BK 115-00144

Fixing tie for hole (round), inside serrated, ⌀50.0mm, black, 1000pcs.

Designed to secure cables with parallel bundling the T80RSF6.5F offers a simple and secure fixing.

Porovnat

T80RSF6.5FW-PA66HS-BK 150-39385

Porovnat

Přidat do sledovaných položek

Designed to secure cables with parallel bundling the T80RSF6.5F offers a simple and secure fixing.

Porovnat

Fixing tie for hole (round), inside serrated, ⌀50.0mm, black, 1000pcs.

Porovnat

Přidat do sledovaných položek

1000 pcs.

Black (BK) T80RSF6.5FW-PA66HS-BK 150-39385

Cable tie not serrated vibration absorbing, 210x8.0mm, ⌀8.0-47.0mm, natural, 50pcs.

KR8/21 Cable tie without serration locked by glass fibre pin

Porovnat

KR8/21-PA66HS-NA 121-82155

Porovnat

Přidat do sledovaných položek

KR8/21 Cable tie without serration locked by glass fibre pin

Porovnat

Cable tie not serrated vibration absorbing, 210x8.0mm, ⌀8.0-47.0mm, natural, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Natural (NA) KR8/21-PA66HS-NA 121-82155

Cable tie not serrated vibration absorbing, 426.0x8.0mm, ⌀8.0-105.0mm, natural, 50pcs.

Porovnat

KR8/43-PA66HS-NA 121-74359

Porovnat

Přidat do sledovaných položek

Porovnat

Cable tie not serrated vibration absorbing, 426.0x8.0mm, ⌀8.0-105.0mm, natural, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Natural (NA) KR8/43-PA66HS-NA 121-74359

Fixing tie for hole (round), outside serrated, ⌀4-20mm, beige, 9000pcs.

One piece fixing tie with arrowhead, outside serrated.

Porovnat

PT2ASFT6.5PT0.7-1.5-E-PEEK-BGE 126-00183

Porovnat

Přidat do sledovaných položek

One piece fixing tie with arrowhead, outside serrated.

Porovnat

Fixing tie for hole (round), outside serrated, ⌀4-20mm, beige, 9000pcs.

Porovnat

Přidat do sledovaných položek

9000 pcs.

Beige (BGE) PT2ASFT6.5PT0.7-1.5-E-PEEK-BGE 126-00183

Fixing tie for stud, inside serrated, ⌀6.4-58.0mm, black, 50pcs.

Provides dual separation between bundles to prevent chafing and abrasion.

Porovnat

DCT11-PA66HIRHSUV-BK 115-31100

Porovnat

Přidat do sledovaných položek

Provides dual separation between bundles to prevent chafing and abrasion.

Porovnat

Fixing tie for stud, inside serrated, ⌀6.4-58.0mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) DCT11-PA66HIRHSUV-BK 115-31100

Cable tie not serrated vibration absorbing, 360x6.1mm, ⌀4.7-93.0mm, natural, 50pcs.

Porovnat

KR6/35-PA66HS-NA 121-63555

Porovnat

Přidat do sledovaných položek

Porovnat

Cable tie not serrated vibration absorbing, 360x6.1mm, ⌀4.7-93.0mm, natural, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Natural (NA) KR6/35-PA66HS-NA 121-63555

Fixing tie for hole (round), outside serrated, ⌀5.0-25.4mm, black/blue, 250

Soft Grip Cable Tie assembled with Soft Grip Mount for holes (arrowhead).

Porovnat

SGT100SAHD6.5S2.0-PA66HS/TPE-BK/BU 156-04097

Porovnat

Přidat do sledovaných položek

Soft Grip Cable Tie assembled with Soft Grip Mount for holes (arrowhead).

Porovnat

Fixing tie for hole (round), outside serrated, ⌀5.0-25.4mm, black/blue, 250

Porovnat

Přidat do sledovaných položek

250 pcs.

Black (BK), Blue (BU) SGT100SAHD6.5S2.0-PA66HS/TPE-BK/BU 156-04097

Fixing tie for stud, outside serrated, ⌀5.0-25.4mm, black/blue, 125

Soft Grip Cable Tie assembled with Soft Grip Mount for studs (weld stud).

Porovnat

SGT100SDSB5-6-PA66HS/TPE/PA66HIRHS-BK/BU 156-04098

Porovnat

Přidat do sledovaných položek

Soft Grip Cable Tie assembled with Soft Grip Mount for studs (weld stud).

Porovnat

Fixing tie for stud, outside serrated, ⌀5.0-25.4mm, black/blue, 125

Porovnat

Přidat do sledovaných položek

125 pcs.

Black (BK), Blue (BU) SGT100SDSB5-6-PA66HS/TPE/PA66HIRHS-BK/BU 156-04098

Fixing tie for stud, inside serrated, ⌀6.4-33.0mm, black, 500pcs.

Provides dual separation between bundles to prevent chafing and abrasion.

Porovnat

DCT9-PA66HIRHSUV-BK 115-00034

Porovnat

Přidat do sledovaných položek

Provides dual separation between bundles to prevent chafing and abrasion.

Porovnat

Fixing tie for stud, inside serrated, ⌀6.4-33.0mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) DCT9-PA66HIRHSUV-BK 115-00034

Cable tie inside serrated, 307.0x12.7mm, ⌀9.5-82.5mm, black, 300pcs.

Porovnat

WSI-PA66HIRHSUV-BK 111-12301

Porovnat

Přidat do sledovaných položek

Porovnat

Cable tie inside serrated, 307.0x12.7mm, ⌀9.5-82.5mm, black, 300pcs.

Porovnat

Přidat do sledovaných položek

300 pcs.

Black (BK) WSI-PA66HIRHSUV-BK 111-12301

Cable tie outside serrated softgrip, 140.0x12.7mm, ⌀5.0-25.4mm, black/blue, 500pcs.

Soft Grip Cable Ties (2-component cable ties).

Porovnat

SGT100S-PA66HS/TPE-BK/BU 111-50000

Porovnat

Přidat do sledovaných položek

Soft Grip Cable Ties (2-component cable ties).

Porovnat

Cable tie outside serrated softgrip, 140.0x12.7mm, ⌀5.0-25.4mm, black/blue, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK), Blue (BU) SGT100S-PA66HS/TPE-BK/BU 111-50000

Cable tie outside serrated softgrip, 140.0x12.7mm, ⌀5.0-25.4mm, black/blue, 500pcs.

Soft Grip Cable Ties (2-component cable ties).

Porovnat

SGT100S-PA66HIRHSUV/TPE-BK/BU 111-50001

Porovnat

Přidat do sledovaných položek

Soft Grip Cable Ties (2-component cable ties).

Porovnat

Cable tie outside serrated softgrip, 140.0x12.7mm, ⌀5.0-25.4mm, black/blue, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK), Blue (BU) SGT100S-PA66HIRHSUV/TPE-BK/BU 111-50001

Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 1000pcs.

These HDM (Heavy duty mount) are suitable for assembling on screws.

Porovnat

KR8/33HDMP6SET-PA66W/PA66GF15-BK 156-02483

Porovnat

Přidat do sledovaných položek

These HDM (Heavy duty mount) are suitable for assembling on screws.

Porovnat

Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 1000pcs.

Porovnat

Přidat do sledovaných položek

1000 pcs.

Black (BK) KR8/33HDMP6SET-PA66W/PA66GF15-BK 156-02483

Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 1000pcs.

These HDM (Heavy duty mount) are suitable for assembling on screws.

Porovnat

KR8/33HDMP8SET-PA66W/PA66GF15-BK 156-02484

Porovnat

Přidat do sledovaných položek

These HDM (Heavy duty mount) are suitable for assembling on screws.

Porovnat

Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 1000pcs.

Porovnat

Přidat do sledovaných položek

1000 pcs.

Black (BK) KR8/33HDMP8SET-PA66W/PA66GF15-BK 156-02484

Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 500pcs.

DHDM (Double heavy duty mount) for parallel routing of bundles.

Porovnat

KR8/33DHDM6SET-PA66W/PA66GF15-BK 156-02485

Porovnat

Přidat do sledovaných položek

DHDM (Double heavy duty mount) for parallel routing of bundles.

Porovnat

Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) KR8/33DHDM6SET-PA66W/PA66GF15-BK 156-02485

Výsledky pro "igh temperature heat shrink tubing" v Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Czech Republic

Zásady ochrany osobních údajů

Sociální média

© HellermannTyton 2026 (v4.312.2) | Aktualizace: 19/07/2026 | Nastavení ochrany osobních údajů

Hledat prodejce Kontakt

‹ › ×