08/08/2026

Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

1 878 produkty
Resetovat vše
Cable clip for hole (round), Dmin=1.0mm
R1 protective strap to hold wires down effortlessly.
Porovnat
R1-PVC-BK 201-20010
Porovnat
Přidat do sledovaných položek
R1 protective strap to hold wires down effortlessly.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) R1-PVC-BK 201-20010
Cable clip for hole (round)
R1 protective strap to hold wires down effortlessly.
Porovnat
R2-PVC-BK 201-20020
Porovnat
Přidat do sledovaných položek
R1 protective strap to hold wires down effortlessly.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) R2-PVC-BK 201-20020
Cable clip for hole (round)
R1 protective strap to hold wires down effortlessly.
Porovnat
R3-PVC-BK 201-20030
Porovnat
Přidat do sledovaných položek
R1 protective strap to hold wires down effortlessly.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) R3-PVC-BK 201-20030
Cable clip for hole (round), ⌀5.0 mm, Dmin=4.5mm, Dmax=5.7mm
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Klam-Klips KK1 - 4.
Porovnat
KK1-PA6HIR-BK 234-10100
Porovnat
Přidat do sledovaných položek
Klam-Klips KK1 - 4.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) KK1-PA6HIR-BK 234-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for hole (round), ⌀5.0 mm, Dmin=5.5mm, Dmax=6.7mm
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Klam-Klips KK1 - 4.
Porovnat
KK2-PA6HIR-BK 234-10200
Porovnat
Přidat do sledovaných položek
Klam-Klips KK1 - 4.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) KK2-PA6HIR-BK 234-10200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for hole (round), ⌀5.0 mm, Dmin=6.5mm, Dmax=7.7mm
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Klam-Klips KK1 - 4.
Porovnat
KK3-PA6HIR-BK 234-10300
Porovnat
Přidat do sledovaných položek
Klam-Klips KK1 - 4.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) KK3-PA6HIR-BK 234-10300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for hole (round), ⌀5.0 mm, Dmin=7.5mm, Dmax=8.5mm
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Klam-Klips KK1 - 4.
Porovnat
KK4-PA6HIR-BK 234-10400
Porovnat
Přidat do sledovaných položek
Klam-Klips KK1 - 4.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) KK4-PA6HIR-BK 234-10400
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀4.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Designed with radiused edges to prevent chafing and cutting into insulation.
Porovnat
H10P-PA66HS-BK 211-60009
Porovnat
Přidat do sledovaných položek
Designed with radiused edges to prevent chafing and cutting into insulation.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) H10P-PA66HS-BK 211-60009
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Designed with radiused edges to prevent chafing and cutting into insulation.
Porovnat
H1P-PA66HS-BK 211-60000
Porovnat
Přidat do sledovaných položek
Designed with radiused edges to prevent chafing and cutting into insulation.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) H1P-PA66HS-BK 211-60000
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Designed with radiused edges to prevent chafing and cutting into insulation.
Porovnat
H2P-PA66HS-BK 211-60001
Porovnat
Přidat do sledovaných položek
Designed with radiused edges to prevent chafing and cutting into insulation.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) H2P-PA66HS-BK 211-60001
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Designed with radiused edges to prevent chafing and cutting into insulation.
Porovnat
H3P-PA66HS-BK 211-60002
Porovnat
Přidat do sledovaných položek
Designed with radiused edges to prevent chafing and cutting into insulation.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) H3P-PA66HS-BK 211-60002
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Designed with radiused edges to prevent chafing and cutting into insulation.
Porovnat
H4P-PA66HS-BK 211-60003
Porovnat
Přidat do sledovaných položek
Designed with radiused edges to prevent chafing and cutting into insulation.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) H4P-PA66HS-BK 211-60003
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Porovnat
H5P-PA66HS-BK 211-60004
Porovnat
Přidat do sledovaných položek
P-Clamps H1P - H18P in different dimensions.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) H5P-PA66HS-BK 211-60004
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Designed with radiused edges to prevent chafing and cutting into insulation.
Porovnat
H6P-PA66HS-BK 211-60005
Porovnat
Přidat do sledovaných položek
Designed with radiused edges to prevent chafing and cutting into insulation.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) H6P-PA66HS-BK 211-60005
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Designed with radiused edges to prevent chafing and cutting into insulation.
Porovnat
H7P-PA66HS-BK 211-60006
Porovnat
Přidat do sledovaných položek
Designed with radiused edges to prevent chafing and cutting into insulation.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) H7P-PA66HS-BK 211-60006
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Designed with radiused edges to prevent chafing and cutting into insulation.
Porovnat
H8P-PA66HS-BK 211-60007
Porovnat
Přidat do sledovaných položek
Designed with radiused edges to prevent chafing and cutting into insulation.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) H8P-PA66HS-BK 211-60007
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Designed with radiused edges to prevent chafing and cutting into insulation.
Porovnat
H9P-PA66HS-BK 211-60008
Porovnat
Přidat do sledovaných položek
Designed with radiused edges to prevent chafing and cutting into insulation.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) H9P-PA66HS-BK 211-60008
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmin=3.0mm, Dmax=3.6mm, ⌀4.3 mm, black, 100pcs.
P-Clip, NX-Series.
Porovnat
NX0-PA66-BK 211-00254
Porovnat
Přidat do sledovaných položek
P-Clip, NX-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) NX0-PA66-BK 211-00254
P-clamp closed, Dmin=4.5mm, Dmax=5.1mm, ⌀4.9 mm, black, 100pcs.
P-Clip, NX-Series.
Porovnat
NX1-PA66-BK 211-00246
Porovnat
Přidat do sledovaných položek
P-Clip, NX-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) NX1-PA66-BK 211-00246
P-clamp closed, Dmin=8.2mm, Dmax=8.8mm, ⌀4.3 mm, black, 100pcs.
P-Clip, NX-Series.
Porovnat
NX3-PA66-BK 211-00248
Porovnat
Přidat do sledovaných položek
P-Clip, NX-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) NX3-PA66-BK 211-00248
P-clamp closed, Dmin=9.2mm, Dmax=9.8mm, ⌀5.0 mm, black, 100pcs.
P-Clip, NX-Series.
Porovnat
NX4-PA66-BK 211-00249
Porovnat
Přidat do sledovaných položek
P-Clip, NX-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) NX4-PA66-BK 211-00249
P-clamp closed, Dmin=14.2mm, Dmax=14.8mm, ⌀5.0 mm, black, 100pcs.
P-Clip, NX-Series.
Porovnat
NX6-PA66-BK 211-00256
Porovnat
Přidat do sledovaných položek
P-Clip, NX-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) NX6-PA66-BK 211-00256
P-clamp closed, Dmin=6.2mm, Dmax=6.8mm, ⌀5.0 mm, black, 100pcs.
P-Clip NXR-Series.
Porovnat
NX1A-PA66-BK 211-00247
Porovnat
Přidat do sledovaných položek
P-Clip NXR-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) NX1A-PA66-BK 211-00247
P-clamp closed, Dmin=12.7mm, Dmax=15.9mm, ⌀4.0 mm, black, 100pcs.
P-Clip NXR-Series.
Porovnat
NXR8-PA66-BK 211-00250
Porovnat
Přidat do sledovaných položek
P-Clip NXR-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) NXR8-PA66-BK 211-00250
P-clamp closed, Dmin=15.9mm, Dmax=20.6mm, ⌀4.0 mm, black, 100pcs.
P-Clip NXR-Series.
Porovnat
NXR11-PA66-BK 211-00251
Porovnat
Přidat do sledovaných položek
P-Clip NXR-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) NXR11-PA66-BK 211-00251
P-clamp closed, Dmin=20.6mm, Dmax=25.4mm, ⌀4.0 mm, black, 100pcs.
P-Clip NXR-Series.
Porovnat
NXR14-PA66-BK 211-00252
Porovnat
Přidat do sledovaných položek
P-Clip NXR-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) NXR14-PA66-BK 211-00252
P-clamp closed, Dmin=20.6mm, Dmax=25.4mm, ⌀4.0 mm, black, 100pcs.
P-Clip NXR-Series.
Porovnat
NXR14-PA66W-BK 211-00255
Porovnat
Přidat do sledovaných položek
P-Clip NXR-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) NXR14-PA66W-BK 211-00255
P-clamp closed, Dmin=27.0mm, Dmax=31.8mm, ⌀4.5 mm, black, 100pcs.
P-Clip NXR-Series.
Porovnat
NXR16-PA66-BK 211-00253
Porovnat
Přidat do sledovaných položek
P-Clip NXR-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) NXR16-PA66-BK 211-00253
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU10C-CR/AL-BK 211-15100
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU10C-CR/AL-BK 211-15100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU11C-AL/CR-BK 211-15110
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU12C-AL/CR-BK 211-15120
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU12C-AL/CR-BK 211-15120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU13C-AL/CR-BK 211-15130
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU14C-AL/CR-BK 211-15140
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU15C-AL/CR-BK 211-15150
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU15C-AL/CR-BK 211-15150
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU16C-AL/CR-BK 211-15160
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU17C-AL/CR-BK 211-15170
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU18C-AL/CR-BK 211-15180
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU19C-AL/CR-BK 211-15190
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU20C-AL/CR-BK 211-15200
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU22C-AL/CR-BK 211-15220
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
ALU23C P-Clamp with chloroprene insert.
Porovnat
ALU23C-AL/CR-BK 211-15230
Porovnat
Přidat do sledovaných položek
ALU23C P-Clamp with chloroprene insert.
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU24C-AL/CR-BK 211-15240
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU25C-AL/CR-BK 211-15250
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU26C-AL/CR-BK 211-15260
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU28C-AL/CR-BK 211-15280
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU29C-AL/CR-BK 211-15290
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU30C-AL/CR-BK 211-15300
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU34C-AL/CR-BK 211-15340
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU4C-AL/CR-BK 211-15040
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU5C-AL/CR-BK 211-15050
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU6C-AL/CR-BK 211-15060
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU6C-AL/CR-BK 211-15060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU7C-AL/CR-BK 211-15070
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU7C-AL/CR-BK 211-15070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU8C-AL/CR-BK 211-15080
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU8C-AL/CR-BK 211-15080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU9C-AL/CR-BK 211-15090
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU9C-AL/CR-BK 211-15090
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for screw fixation, ⌀3.1 mm
FKH25 are designed to retain flat ribbon cables.
Porovnat
FKH25-PA66HIR-BK 151-16250
Porovnat
Přidat do sledovaných položek
FKH25 are designed to retain flat ribbon cables.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) FKH25-PA66HIR-BK 151-16250
Cable clip for screw fixation, ⌀3.1 mm
FKH30 mounts are designed to retain flat ribbon cables.
Porovnat
FKH30-PA66HIR-BK 151-16300
Porovnat
Přidat do sledovaných položek
FKH30 mounts are designed to retain flat ribbon cables.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) FKH30-PA66HIR-BK 151-16300
Cable clip for screw fixation, ⌀3.1 mm
FKH50 are designed to retain flat ribbon cables.
Porovnat
FKH50-PA66HIR-BK 151-16500
Porovnat
Přidat do sledovaných položek
FKH50 are designed to retain flat ribbon cables.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) FKH50-PA66HIR-BK 151-16500
Cable clip for screw fixation, ⌀3.1 mm
FKH80 are designed to retain flat ribbon cables.
Porovnat
FKH80-PA66HIR-BK 151-16800
Porovnat
Přidat do sledovaných položek
FKH80 are designed to retain flat ribbon cables.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) FKH80-PA66HIR-BK 151-16800
Cable clip for screw fixation/with pipe/tube holder, ⌀M8, Dmax=29.0mm
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Screwed Ratchet Clamp SRC150M8 for parallel bundling of cables and tubes.
Porovnat
SRC150M8-PA6GF30-BK 156-02742
Porovnat
Přidat do sledovaných položek
Screwed Ratchet Clamp SRC150M8 for parallel bundling of cables and tubes.
Porovnat
Porovnat
Přidat do sledovaných položek
150
Black (BK) SRC150M8-PA6GF30-BK 156-02742
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Plastic hose clamp, ⌀14.5-16.6mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
SNP10-PA66HIRHSGF15-BK 192-10100
Porovnat
Přidat do sledovaných položek
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) SNP10-PA66HIRHSGF15-BK 192-10100
Plastic hose clamp, ⌀19.1-21.7mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
SNP16-PA66GF13-BK 192-10160
Porovnat
Přidat do sledovaných položek
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) SNP16-PA66GF13-BK 192-10160
Plastic hose clamp, ⌀22.3-25.3mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
SNP19-PA66GF13-BK 190-00090
Porovnat
Přidat do sledovaných položek
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) SNP19-PA66GF13-BK 190-00090
Plastic hose clamp, ⌀6.0-6.8mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Completely reusable - will not rust or corrode.
Porovnat
SNP1-PA66GF13-BK 192-10010
Porovnat
Přidat do sledovaných položek
Completely reusable - will not rust or corrode.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) SNP1-PA66GF13-BK 192-10010
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Plastic hose clamp, ⌀23.7-27.4mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
SNP22-PA66GF13-BK 192-10220
Porovnat
Přidat do sledovaných položek
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) SNP22-PA66GF13-BK 192-10220
Plastic hose clamp, ⌀25.8-29.2mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
SNP24-PA66GF13-BK 192-10240
Porovnat
Přidat do sledovaných položek
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) SNP24-PA66GF13-BK 192-10240
Plastic hose clamp, ⌀28.8-33.2mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
SNP28-PA66GF13-BK 190-00127
Porovnat
Přidat do sledovaných položek
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) SNP28-PA66GF13-BK 190-00127
Plastic hose clamp, ⌀9.3-10.5mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Completely reusable - will not rust or corrode.
Porovnat
SNP2-PA66GF13-BK 192-10020
Porovnat
Přidat do sledovaných položek
Completely reusable - will not rust or corrode.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) SNP2-PA66GF13-BK 192-10020
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Plastic hose clamp, ⌀31.2-35.8mm, black, 50pcs.
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
SNP32-PA66GF13-BK 192-10320
Porovnat
Přidat do sledovaných položek
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) SNP32-PA66GF13-BK 192-10320
Plastic hose clamp, ⌀41.0-48.1mm, black, 50pcs.
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
SNP38-PA66GF13-BK 192-10380
Porovnat
Přidat do sledovaných položek
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) SNP38-PA66GF13-BK 192-10380
Plastic hose clamp, ⌀10.4-11.7mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
SNP4-PA66GF13-BK 192-10040
Porovnat
Přidat do sledovaných položek
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) SNP4-PA66GF13-BK 192-10040
Plastic hose clamp, ⌀52.2-58.6mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
SNP50-PA66GF13-BK 192-10500
Porovnat
Přidat do sledovaných položek
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) SNP50-PA66GF13-BK 192-10500
Plastic hose clamp, ⌀11.7-13.3mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
SNP6-PA66GF13-BK 192-10060
Porovnat
Přidat do sledovaných položek
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) SNP6-PA66GF13-BK 192-10060
Plastic hose clamp, ⌀11.4-13.7mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
SNP7-PA66GF13-BK 192-10070
Porovnat
Přidat do sledovaných položek
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) SNP7-PA66GF13-BK 192-10070
Plastic hose clamp, ⌀13.1-15.0mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
SNP8-PA66GF13-BK 192-10080
Porovnat
Přidat do sledovaných položek
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) SNP8-PA66GF13-BK 192-10080
Plastic hose clamp, ⌀7.1-7.7mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
SNP1.25-PA66GF13-BK 190-00029
Porovnat
Přidat do sledovaných položek
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) SNP1.25-PA66GF13-BK 190-00029
Plastic hose clamp, ⌀15.6-18.3mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
SNP12A-PA66GF13-BK 190-00254
Porovnat
Přidat do sledovaných položek
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) SNP12A-PA66GF13-BK 190-00254
Plastic hose clamp, ⌀19.9-23.6mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
SNP18A-PA66GF13-BK 190-00258
Porovnat
Přidat do sledovaných položek
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) SNP18A-PA66GF13-BK 190-00258
Plastic hose clamp, ⌀18.5-21.0mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
SNP14A-PA66GF13-BK 190-00300
Porovnat
Přidat do sledovaných položek
Designed for quick, ratcheted installation and can be released and reused.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) SNP14A-PA66GF13-BK 190-00300
Cable clip for screw fixation, ⌀5.3 mm, Dmin=6.0mm, Dmax=8.5mm
Porovnat
KB2-PA66-BK 231-10200
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) KB2-PA66-BK 231-10200
Cable clip, T=1.3 - 2.3mm, ⌀4.7 - 4.9 mm, Dmin=11.0mm, Dmax=12.0mm, nom⌀=11.5
Arrowhead clip with TwistLock.
Porovnat
HTS9-PA66-BK 151-00725
Porovnat
Přidat do sledovaných položek
Arrowhead clip with TwistLock.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) HTS9-PA66-BK 151-00725
Corrugated tube clip, black, 250pcs.
The cable guide standoff stands off bundles from frame rails, providing clearance from bolts and other protrusions for protection against abrasion.
Porovnat
CGS1-PA66HIRHSUV-BK 151-00006
Porovnat
Přidat do sledovaných položek
The cable guide standoff stands off bundles from frame rails, providing clearance from bolts and other protrusions for protection against abrasion.
Porovnat
Porovnat
Přidat do sledovaných položek
250 pcs.
Black (BK) CGS1-PA66HIRHSUV-BK 151-00006
Blind plug, ⌀20.0 x 50.0 mm, black, 1500pcs.
Blindplugs are available in different dimensions and materials.
Porovnat
Cover Plug 20x50-PP/EPDM-BK 151-00342
Porovnat
Přidat do sledovaných položek
Blindplugs are available in different dimensions and materials.
Porovnat
Porovnat
Přidat do sledovaných položek
1500 pcs.
Black (BK) Cover Plug 20x50-PP/EPDM-BK 151-00342
Blind plug, ⌀11.0 mm, black, 1500pcs.
Porovnat
PLUG11-POM-BK 151-00360
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
1500 pcs.
Black (BK) PLUG11-POM-BK 151-00360
Blind plug, ⌀42.0 x 84.0 mm, black, 500pcs.
Blindplugs are available in different dimensions and materials.
Porovnat
Open Plug 42x84-PA6HIR-BK 151-00391
Porovnat
Přidat do sledovaných položek
Blindplugs are available in different dimensions and materials.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) Open Plug 42x84-PA6HIR-BK 151-00391
Blind plug, ⌀34.6 x 112.0 mm, black, 400pcs.
Blindplugs are available in different dimensions and materials.
Porovnat
OPEN PLUG 34.6x112-PA66HIR-BK 151-00394
Porovnat
Přidat do sledovaných položek
Blindplugs are available in different dimensions and materials.
Porovnat
Porovnat
Přidat do sledovaných položek
400 pcs.
Black (BK) OPEN PLUG 34.6x112-PA66HIR-BK 151-00394
Blind plug, ⌀5.0 - 5.5 mm, black, 500pcs.
Blindplugs are available in different dimensions and materials.
Porovnat
PLUG5.5-PA6HIR-BK 151-00399
Porovnat
Přidat do sledovaných položek
Blindplugs are available in different dimensions and materials.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) PLUG5.5-PA6HIR-BK 151-00399
Blind plug, ⌀7.05 - 7.25 mm, black, 2500pcs.
Blindplugs are available in different dimensions and materials.
Porovnat
PLUGFT7-PA6HIR-BK 151-00414
Porovnat
Přidat do sledovaných položek
Blindplugs are available in different dimensions and materials.
Porovnat
Porovnat
Přidat do sledovaných položek
2500 pcs.
Black (BK) PLUGFT7-PA6HIR-BK 151-00414
Blind plug, ⌀32.0 mm, black, 1500pcs.
Blindplugs are available in different dimensions and materials.
Porovnat
Cover Plug 32-EPDM-BK 151-00424
Porovnat
Přidat do sledovaných položek
Blindplugs are available in different dimensions and materials.
Porovnat
Porovnat
Přidat do sledovaných položek
1500 pcs.
Black (BK) Cover Plug 32-EPDM-BK 151-00424
Blind plug, ⌀6.5 - 7.0 mm, black, 1000pcs.
Blindplugs are available in different dimensions and materials.
Porovnat
PLUGFT6XL-PA66HIR-BK 241-00002
Porovnat
Přidat do sledovaných položek
Blindplugs are available in different dimensions and materials.
Porovnat
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) PLUGFT6XL-PA66HIR-BK 241-00002
Cable clip
Dual pipe clip secures two routings together while keeping them separated, to prevent chafing or heat transfer.
Porovnat
PC6.5X2-PA66HIRHSUV-BK 133-03187
Porovnat
Přidat do sledovaných položek
Dual pipe clip secures two routings together while keeping them separated, to prevent chafing or heat transfer.
Porovnat
Porovnat
Přidat do sledovaných položek
3000 pcs.
Black (BK) PC6.5X2-PA66HIRHSUV-BK 133-03187
Cable clip
Triple pipe clip secures three routings together while keeping them separated, to prevent chafing or heat transfer.
Porovnat
PC5X3-PA66HIRHSUV-BK 133-03188
Porovnat
Přidat do sledovaných položek
Triple pipe clip secures three routings together while keeping them separated, to prevent chafing or heat transfer.
Porovnat
Porovnat
Přidat do sledovaných položek
4000 pcs.
Black (BK) PC5X3-PA66HIRHSUV-BK 133-03188
Cable clip, ⌀6.0 mm
With Fixing Element DUALM6DOCK bundles can be routed in parallel even as post installation.
Porovnat
DUALM6DOCK-PA66HS-BK 151-01056
Porovnat
Přidat do sledovaných položek
With Fixing Element DUALM6DOCK bundles can be routed in parallel even as post installation.
Porovnat
Porovnat
Přidat do sledovaných položek
2000 pcs.
Black (BK) DUALM6DOCK-PA66HS-BK 151-01056
Accessory, black, 10000pcs. (CCSC-FT6.2x12.2)
Connector clip with fir tree for oval holes, to fix cable chanels, brackets and holders.
Porovnat
CCSC-FT6.2x12.2-PA66HIRHS-BK 151-03432
Porovnat
Přidat do sledovaných položek
Connector clip with fir tree for oval holes, to fix cable chanels, brackets and holders.
Porovnat
Porovnat
Přidat do sledovaných položek
10000 pcs.
Black (BK) CCSC-FT6.2x12.2-PA66HIRHS-BK 151-03432
Cable clip with pipe/tube holder, Dmax=10.5mm
Porovnat
IPC10PIPC10P-PA6-BK 156-00118
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
2500 pcs.
Black (BK) IPC10PIPC10P-PA6-BK 156-00118
Cable clip for hole (round)/with pipe/tube holder, ⌀6.4 - 7.1 mm, Dmin=8mm, Dmax=12mm
Porovnat
ICD8x12SFT65STUD5-PA66HIRHS-BK 156-00165
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
1500 pcs.
Black (BK) ICD8x12SFT65STUD5-PA66HIRHS-BK 156-00165
Cable clip
Porovnat
IPC15PCR-PA66-BK 156-00167
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) IPC15PCR-PA66-BK 156-00167
Cable clip
Porovnat
FTS5STUD5IC5X6-PA66HIRHS-BK 156-00236
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
450 pcs.
Black (BK) FTS5STUD5IC5X6-PA66HIRHS-BK 156-00236
Cable clip for hole (round)/with pipe/tube holder, ⌀6.4 - 7.1 mm
Porovnat
ICD5x10FT6LGSTUD5-PA66HIRHS-BK 156-00314
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
2000 pcs.
Black (BK) ICD5x10FT6LGSTUD5-PA66HIRHS-BK 156-00314
Cable clip
Porovnat
IAHC2TIC65-PA66HIRHS-BK 156-00325
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
400 pcs.
Black (BK) IAHC2TIC65-PA66HIRHS-BK 156-00325
Cable clip
Porovnat
IAHC2TPION21280-PA66HIRHS-BK 156-00327
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
400 pcs.
Black (BK) IAHC2TPION21280-PA66HIRHS-BK 156-00327

Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

  Czech Republic

Sociální média

© HellermannTyton 2026 (v4.312.3)  |  Aktualizace: 02/08/2026  |  Nastavení ochrany osobních údajů
Hledat prodejce Kontakt