Výsledky pro "Cable Clamp" v Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Pohled inženýra

Sustainable

Pohled inženýra

Sustainable

Resetovat vše

P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU17C-AL/CR-BK 211-15170

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU17C-AL/CR-BK 211-15170

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU19C-AL/CR-BK 211-15190

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU19C-AL/CR-BK 211-15190

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

ALU23C P-Clamp with chloroprene insert.

Porovnat

ALU23C-AL/CR-BK 211-15230

Porovnat

Přidat do sledovaných položek

ALU23C P-Clamp with chloroprene insert.

Porovnat

P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU23C-AL/CR-BK 211-15230

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU24C-AL/CR-BK 211-15240

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU24C-AL/CR-BK 211-15240

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU25C-AL/CR-BK 211-15250

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU25C-AL/CR-BK 211-15250

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU26C-AL/CR-BK 211-15260

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU26C-AL/CR-BK 211-15260

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU28C-AL/CR-BK 211-15280

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU28C-AL/CR-BK 211-15280

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU29C-AL/CR-BK 211-15290

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU29C-AL/CR-BK 211-15290

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU30C-AL/CR-BK 211-15300

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU30C-AL/CR-BK 211-15300

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU34C-AL/CR-BK 211-15340

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU34C-AL/CR-BK 211-15340

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

ALU8-AL-NA 211-10080

Porovnat

Přidat do sledovaných položek

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Natural (NA) ALU8-AL-NA 211-10080

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Plastic hose clamp, ⌀15.0-16.8mm, natural, 500pcs.

Completely reusable - will not rust or corrode.

Porovnat

SNP10(E)-POM-NA 191-10109

Porovnat

Přidat do sledovaných položek

Completely reusable - will not rust or corrode.

Porovnat

Plastic hose clamp, ⌀15.0-16.8mm, natural, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Natural (NA) SNP10(E)-POM-NA 191-10109

Plastic hose clamp, ⌀22.3-25.3mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

SNP19-PA66GF13-BK 190-00090

Porovnat

Přidat do sledovaných položek

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

Plastic hose clamp, ⌀22.3-25.3mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) SNP19-PA66GF13-BK 190-00090

Plastic hose clamp, ⌀25.0-28.8mm, natural, 500pcs.

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

SNP24-POM-NA 191-10249

Porovnat

Přidat do sledovaných položek

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

Plastic hose clamp, ⌀25.0-28.8mm, natural, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Natural (NA) SNP24-POM-NA 191-10249

Plastic hose clamp, ⌀28.8-33.2mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

SNP28-PA66GF13-BK 190-00127

Porovnat

Přidat do sledovaných položek

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

Plastic hose clamp, ⌀28.8-33.2mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) SNP28-PA66GF13-BK 190-00127

Plastic hose clamp, ⌀41.0-48.1mm, black, 50pcs.

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

SNP38-PA66GF13-BK 192-10380

Porovnat

Přidat do sledovaných položek

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

Plastic hose clamp, ⌀41.0-48.1mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) SNP38-PA66GF13-BK 192-10380

Plastic hose clamp, ⌀7.1-7.7mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

SNP1.25-PA66GF13-BK 190-00029

Porovnat

Přidat do sledovaných položek

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

Plastic hose clamp, ⌀7.1-7.7mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) SNP1.25-PA66GF13-BK 190-00029

Plastic hose clamp, ⌀19.9-23.6mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

SNP18A-PA66GF13-BK 190-00258

Porovnat

Přidat do sledovaných položek

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

Plastic hose clamp, ⌀19.9-23.6mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) SNP18A-PA66GF13-BK 190-00258

Plastic hose clamp, ⌀18.1-19.9mm, natural, 500pcs.

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

SNP14(E)-POM-NA 191-10149

Porovnat

Přidat do sledovaných položek

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

Plastic hose clamp, ⌀18.1-19.9mm, natural, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Natural (NA) SNP14(E)-POM-NA 191-10149

Plastic hose clamp, ⌀19.3-21.5mm, natural, 500pcs.

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

SNP16-POM-NA 191-10169

Porovnat

Přidat do sledovaných položek

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

Plastic hose clamp, ⌀19.3-21.5mm, natural, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Natural (NA) SNP16-POM-NA 191-10169

Plastic hose clamp, ⌀19.1-21.7mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

SNP16-PA66GF13-BK 192-10160

Porovnat

Přidat do sledovaných položek

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

Plastic hose clamp, ⌀19.1-21.7mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) SNP16-PA66GF13-BK 192-10160

Plastic hose clamp, ⌀6.0-6.5mm, white, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Completely reusable - will not rust or corrode.

Porovnat

SNP1-POM-WH 190-00022

Porovnat

Přidat do sledovaných položek

Completely reusable - will not rust or corrode.

Porovnat

Plastic hose clamp, ⌀6.0-6.5mm, white, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

White (WH) SNP1-POM-WH 190-00022

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Plastic hose clamp, ⌀25.3-27.3mm, natural, 500pcs.

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

SNP22(E)-POM-NA 191-10229

Porovnat

Přidat do sledovaných položek

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

Plastic hose clamp, ⌀25.3-27.3mm, natural, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Natural (NA) SNP22(E)-POM-NA 191-10229

Plastic hose clamp, ⌀23.7-27.4mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

SNP22-PA66GF13-BK 192-10220

Porovnat

Přidat do sledovaných položek

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

Plastic hose clamp, ⌀23.7-27.4mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) SNP22-PA66GF13-BK 192-10220

Plastic hose clamp, ⌀25.8-29.2mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

SNP24-PA66GF13-BK 192-10240

Porovnat

Přidat do sledovaných položek

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

Plastic hose clamp, ⌀25.8-29.2mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) SNP24-PA66GF13-BK 192-10240

Plastic hose clamp, ⌀31.2-35.8mm, black, 50pcs.

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

SNP32-PA66GF13-BK 192-10320

Porovnat

Přidat do sledovaných položek

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

Plastic hose clamp, ⌀31.2-35.8mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) SNP32-PA66GF13-BK 192-10320

Plastic hose clamp, ⌀12.0-13.7mm, natural, 500pcs.

SNP - Snapper Hose Clips range.

Porovnat

SNP6(E)-POM-NA 191-10069

Porovnat

Přidat do sledovaných položek

SNP - Snapper Hose Clips range.

Porovnat

Plastic hose clamp, ⌀12.0-13.7mm, natural, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Natural (NA) SNP6(E)-POM-NA 191-10069

Plastic hose clamp, ⌀11.4-13.7mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

SNP7-PA66GF13-BK 192-10070

Porovnat

Přidat do sledovaných položek

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

Plastic hose clamp, ⌀11.4-13.7mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) SNP7-PA66GF13-BK 192-10070

Plastic hose clamp, ⌀13.7-15.3mm, natural, 500pcs.

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

SNP8(E)-POM-NA 191-10089

Porovnat

Přidat do sledovaných položek

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

Plastic hose clamp, ⌀13.7-15.3mm, natural, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Natural (NA) SNP8(E)-POM-NA 191-10089

Plastic hose clamp, ⌀15.6-18.3mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

SNP12A-PA66GF13-BK 190-00254

Porovnat

Přidat do sledovaných položek

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

Plastic hose clamp, ⌀15.6-18.3mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) SNP12A-PA66GF13-BK 190-00254

P-clamp closed, Dmax=17.5mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Porovnat

H10P-PA66-NA 211-60109

Porovnat

Přidat do sledovaných položek

P-Clamps H1P - H18P in different dimensions.

Porovnat

P-clamp closed, Dmax=17.5mm, ⌀4.2 mm, natural, 1000pcs.

Porovnat

Přidat do sledovaných položek

1000 pcs.

Natural (NA) H10P-PA66-NA 211-60109

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=20.5mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Porovnat

H12P-PA66-NA 211-60129

Porovnat

Přidat do sledovaných položek

P-Clamps H1P - H18P in different dimensions.

Porovnat

P-clamp closed, Dmax=20.5mm, ⌀4.2 mm, natural, 1000pcs.

Porovnat

Přidat do sledovaných položek

1000 pcs.

Natural (NA) H12P-PA66-NA 211-60129

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Porovnat

H2P-PA66HS-BK 211-60001

Porovnat

Přidat do sledovaných položek

Designed with radiused edges to prevent chafing and cutting into insulation.

Porovnat

P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) H2P-PA66HS-BK 211-60001

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Porovnat

H5P-PA66HS-BK 211-60004

Porovnat

Přidat do sledovaných položek

P-Clamps H1P - H18P in different dimensions.

Porovnat

P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) H5P-PA66HS-BK 211-60004

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

ALU10-AL-NA 211-10100

Porovnat

Přidat do sledovaných položek

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Natural (NA) ALU10-AL-NA 211-10100

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU11C-AL/CR-BK 211-15110

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU11C-AL/CR-BK 211-15110

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU13C-AL/CR-BK 211-15130

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU13C-AL/CR-BK 211-15130

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU14C-AL/CR-BK 211-15140

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU14C-AL/CR-BK 211-15140

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU16C-AL/CR-BK 211-15160

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU16C-AL/CR-BK 211-15160

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU18C-AL/CR-BK 211-15180

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU18C-AL/CR-BK 211-15180

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU20C-AL/CR-BK 211-15200

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU20C-AL/CR-BK 211-15200

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU22C-AL/CR-BK 211-15220

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU22C-AL/CR-BK 211-15220

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

ALU4-AL-NA 211-10040

Porovnat

Přidat do sledovaných položek

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Natural (NA) ALU4-AL-NA 211-10040

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU4C-AL/CR-BK 211-15040

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU4C-AL/CR-BK 211-15040

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

ALU5-AL-NA 211-10050

Porovnat

Přidat do sledovaných položek

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Natural (NA) ALU5-AL-NA 211-10050

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU5C-AL/CR-BK 211-15050

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU5C-AL/CR-BK 211-15050

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

ALU7-AL-NA 211-10070

Porovnat

Přidat do sledovaných položek

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Natural (NA) ALU7-AL-NA 211-10070

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

ALU6-AL-NA 211-10060

Porovnat

Přidat do sledovaných položek

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Natural (NA) ALU6-AL-NA 211-10060

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Plastic hose clamp, ⌀14.5-16.6mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

SNP10-PA66HIRHSGF15-BK 192-10100

Porovnat

Přidat do sledovaných položek

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

Plastic hose clamp, ⌀14.5-16.6mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) SNP10-PA66HIRHSGF15-BK 192-10100

Plastic hose clamp, ⌀16.8-18.4mm, natural, 500pcs.

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

SNP12(E)-POM-NA 191-10129

Porovnat

Přidat do sledovaných položek

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

Plastic hose clamp, ⌀16.8-18.4mm, natural, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Natural (NA) SNP12(E)-POM-NA 191-10129

Plastic hose clamp, ⌀6.0-6.8mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Completely reusable - will not rust or corrode.

Porovnat

SNP1-PA66GF13-BK 192-10010

Porovnat

Přidat do sledovaných položek

Completely reusable - will not rust or corrode.

Porovnat

Plastic hose clamp, ⌀6.0-6.8mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) SNP1-PA66GF13-BK 192-10010

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Plastic hose clamp, ⌀8.7-10.0mm, natural, 500pcs.

SNP - Snapper Hose Clips range.

Porovnat

SNP2(E)-POM-NA 191-10029

Porovnat

Přidat do sledovaných položek

SNP - Snapper Hose Clips range.

Porovnat

Plastic hose clamp, ⌀8.7-10.0mm, natural, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Natural (NA) SNP2(E)-POM-NA 191-10029

Plastic hose clamp, ⌀9.3-10.5mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Completely reusable - will not rust or corrode.

Porovnat

SNP2-PA66GF13-BK 192-10020

Porovnat

Přidat do sledovaných položek

Completely reusable - will not rust or corrode.

Porovnat

Plastic hose clamp, ⌀9.3-10.5mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) SNP2-PA66GF13-BK 192-10020

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Plastic hose clamp, ⌀10.0-11.4mm, natural, 500pcs.

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

SNP3(E)-POM-NA 191-10039

Porovnat

Přidat do sledovaných položek

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

Plastic hose clamp, ⌀10.0-11.4mm, natural, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Natural (NA) SNP3(E)-POM-NA 191-10039

Plastic hose clamp, ⌀10.8-12.3mm, natural, 500pcs.

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

SNP4(E)-POM-NA 191-10049

Porovnat

Přidat do sledovaných položek

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

Plastic hose clamp, ⌀10.8-12.3mm, natural, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Natural (NA) SNP4(E)-POM-NA 191-10049

Plastic hose clamp, ⌀10.4-11.7mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

SNP4-PA66GF13-BK 192-10040

Porovnat

Přidat do sledovaných položek

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

Plastic hose clamp, ⌀10.4-11.7mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) SNP4-PA66GF13-BK 192-10040

Plastic hose clamp, ⌀11.7-13.3mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

SNP6-PA66GF13-BK 192-10060

Porovnat

Přidat do sledovaných položek

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

Plastic hose clamp, ⌀11.7-13.3mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) SNP6-PA66GF13-BK 192-10060

Plastic hose clamp, ⌀13.1-15.0mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

SNP8-PA66GF13-BK 192-10080

Porovnat

Přidat do sledovaných položek

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

Plastic hose clamp, ⌀13.1-15.0mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) SNP8-PA66GF13-BK 192-10080

Plastic hose clamp, ⌀18.5-21.0mm, black, 100pcs.

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

SNP14A-PA66GF13-BK 190-00300

Porovnat

Přidat do sledovaných položek

Designed for quick, ratcheted installation and can be released and reused.

Porovnat

Plastic hose clamp, ⌀18.5-21.0mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) SNP14A-PA66GF13-BK 190-00300

Cable clip for hole (round), ⌀5.0 mm, Dmin=4.5mm, Dmax=5.7mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Klam-Klips KK1 - 4.

Porovnat

KK1-PA6HIR-BK 234-10100

Porovnat

Přidat do sledovaných položek

Klam-Klips KK1 - 4.

Porovnat

Cable clip for hole (round), ⌀5.0 mm, Dmin=4.5mm, Dmax=5.7mm

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) KK1-PA6HIR-BK 234-10100

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip for hole (round), ⌀5.0 mm, Dmin=6.5mm, Dmax=7.7mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Klam-Klips KK1 - 4.

Porovnat

KK3-PA6HIR-BK 234-10300

Porovnat

Přidat do sledovaných položek

Klam-Klips KK1 - 4.

Porovnat

Cable clip for hole (round), ⌀5.0 mm, Dmin=6.5mm, Dmax=7.7mm

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) KK3-PA6HIR-BK 234-10300

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Porovnat

H8P-PA66-NA 211-60089

Porovnat

Přidat do sledovaných položek

P-Clamps H1P - H18P in different dimensions.

Porovnat

P-clamp closed, Dmax=14.0mm, ⌀4.2 mm, natural, 1000pcs.

Porovnat

Přidat do sledovaných položek

1000 pcs.

Natural (NA) H8P-PA66-NA 211-60089

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Porovnat

H9P-PA66-NA 211-60099

Porovnat

Přidat do sledovaných položek

P-Clamps H1P - H18P in different dimensions.

Porovnat

P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, natural, 1000pcs.

Porovnat

Přidat do sledovaných položek

1000 pcs.

Natural (NA) H9P-PA66-NA 211-60099

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU12C-AL/CR-BK 211-15120

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU12C-AL/CR-BK 211-15120

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU15C-AL/CR-BK 211-15150

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU15C-AL/CR-BK 211-15150

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU6C-AL/CR-BK 211-15060

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU6C-AL/CR-BK 211-15060

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU7C-AL/CR-BK 211-15070

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU7C-AL/CR-BK 211-15070

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU8C-AL/CR-BK 211-15080

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU8C-AL/CR-BK 211-15080

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU9C-AL/CR-BK 211-15090

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU9C-AL/CR-BK 211-15090

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable cleat trefoil formation, SS316L, for cable diameters 23mm to 28mm, IEC61914-2021

Cable cleat, trefoil

Porovnat

CCT028-SS316L/PO-ML 151-05002

Porovnat

Přidat do sledovaných položek

Cable cleat, trefoil

Porovnat

Cable cleat trefoil formation, SS316L, for cable diameters 23mm to 28mm, IEC61914-2021

Porovnat

Přidat do sledovaných položek

1 pcs.

Metal (ML) CCT028-SS316L/PO-ML 151-05002

Cable clip for hole (round), ⌀5.0 mm, Dmin=5.5mm, Dmax=6.7mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Klam-Klips KK1 - 4.

Porovnat

KK2-PA6HIR-BK 234-10200

Porovnat

Přidat do sledovaných položek

Klam-Klips KK1 - 4.

Porovnat

Cable clip for hole (round), ⌀5.0 mm, Dmin=5.5mm, Dmax=6.7mm

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) KK2-PA6HIR-BK 234-10200

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Porovnat

H7P-PA66-NA 211-60079

Porovnat

Přidat do sledovaných položek

P-Clamps H1P - H18P in different dimensions.

Porovnat

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, natural, 1000pcs.

Porovnat

Přidat do sledovaných položek

1000 pcs.

Natural (NA) H7P-PA66-NA 211-60079

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU10C-CR/AL-BK 211-15100

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU10C-CR/AL-BK 211-15100

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip for hole (round), ⌀5.0 mm, Dmin=7.5mm, Dmax=8.5mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Klam-Klips KK1 - 4.

Porovnat

KK4-PA6HIR-BK 234-10400

Porovnat

Přidat do sledovaných položek

Klam-Klips KK1 - 4.

Porovnat

Cable clip for hole (round), ⌀5.0 mm, Dmin=7.5mm, Dmax=8.5mm

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) KK4-PA6HIR-BK 234-10400

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Samples ENG Ratchet P Clamp-DIV-BK

Porovnat

Samples ENG Ratchet P Clamp-DIV-BK 905-50036

Porovnat

Přidat do sledovaných položek

Porovnat

Samples ENG Ratchet P Clamp-DIV-BK

Porovnat

Přidat do sledovaných položek

1 pack

Black (BK) Samples ENG Ratchet P Clamp-DIV-BK 905-50036

Samples Ratchet P Clamp-DIV-BK

Porovnat

Samples Ratchet P Clamp-DIV-BK 905-50037

Porovnat

Přidat do sledovaných položek

Porovnat

Samples Ratchet P Clamp-DIV-BK

Porovnat

Přidat do sledovaných položek

1 pack

Black (BK) Samples Ratchet P Clamp-DIV-BK 905-50037

P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Porovnat

H1P-PA66-NA 211-60019

Porovnat

Přidat do sledovaných položek

P-Clamps H1P - H18P in different dimensions.

Porovnat

P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, natural, 1000pcs.

Porovnat

Přidat do sledovaných položek

1000 pcs.

Natural (NA) H1P-PA66-NA 211-60019

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Porovnat

H6P-PA66-NA 211-60069

Porovnat

Přidat do sledovaných položek

P-Clamps H1P - H18P in different dimensions.

Porovnat

P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, natural, 1000pcs.

Porovnat

Přidat do sledovaných položek

1000 pcs.

Natural (NA) H6P-PA66-NA 211-60069

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Porovnat

H5P-PA66-NA 211-60059

Porovnat

Přidat do sledovaných položek

P-Clamps H1P - H18P in different dimensions.

Porovnat

P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 1000pcs.

Porovnat

Přidat do sledovaných položek

1000 pcs.

Natural (NA) H5P-PA66-NA 211-60059

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable cleat trefoil formation, SS316L, for cable diameters 18mm to 23mm, IEC61914-2021

Cable cleat, trefoil

Porovnat

CCT023-SS316L/PO-ML 151-05001

Porovnat

Přidat do sledovaných položek

Cable cleat, trefoil

Porovnat

Cable cleat trefoil formation, SS316L, for cable diameters 18mm to 23mm, IEC61914-2021

Porovnat

Přidat do sledovaných položek

1 pcs.

Metal (ML) CCT023-SS316L/PO-ML 151-05001

P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Porovnat

H3P-PA66-NA 211-60039

Porovnat

Přidat do sledovaných položek

P-Clamps H1P - H18P in different dimensions.

Porovnat

P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, natural, 1000pcs.

Porovnat

Přidat do sledovaných položek

1000 pcs.

Natural (NA) H3P-PA66-NA 211-60039

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Porovnat

H4P-PA66-NA 211-60049

Porovnat

Přidat do sledovaných položek

P-Clamps H1P - H18P in different dimensions.

Porovnat

P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, natural, 1000pcs.

Porovnat

Přidat do sledovaných položek

1000 pcs.

Natural (NA) H4P-PA66-NA 211-60049

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable cleat trefoil formation SS316L, for cable diameters 27mm to 32mm, IEC61914-2021

Cable cleat, trefoil

Porovnat

CCT032-SS316L/PO-ML 151-05003

Porovnat

Přidat do sledovaných položek

Cable cleat, trefoil

Porovnat

Cable cleat trefoil formation SS316L, for cable diameters 27mm to 32mm, IEC61914-2021

Porovnat

Přidat do sledovaných položek

1 pcs.

Metal (ML) CCT032-SS316L/PO-ML 151-05003

Cable cleat trefoil formation, SS316L, for cable diameters 30mm to 35mm, IEC61914-20321

Cable cleat, trefoil

Porovnat

CCT035-SS316L/PO-ML 151-05004

Porovnat

Přidat do sledovaných položek

Cable cleat, trefoil

Porovnat

Cable cleat trefoil formation, SS316L, for cable diameters 30mm to 35mm, IEC61914-20321

Porovnat

Přidat do sledovaných položek

1 pcs.

Metal (ML) CCT035-SS316L/PO-ML 151-05004

Cable cleat trefoil formation, SS316L, for cable diameters 33mm to 38mm, IEC61914-2021

Cable cleat, trefoil

Porovnat

CCT038-SS316L/PO-ML 151-05005

Porovnat

Přidat do sledovaných položek

Cable cleat, trefoil

Porovnat

Cable cleat trefoil formation, SS316L, for cable diameters 33mm to 38mm, IEC61914-2021

Porovnat

Přidat do sledovaných položek

1 pcs.

Metal (ML) CCT038-SS316L/PO-ML 151-05005

Cable cleat trefoil formation, SS316L, for cable diameters 36mm to 42mm, IEC61914-2021

Cable cleat, trefoil

Porovnat

CCT042-SS316L/PO-ML 151-05006

Porovnat

Přidat do sledovaných položek

Cable cleat, trefoil

Porovnat

Cable cleat trefoil formation, SS316L, for cable diameters 36mm to 42mm, IEC61914-2021

Porovnat

Přidat do sledovaných položek

1 pcs.

Metal (ML) CCT042-SS316L/PO-ML 151-05006

Cable cleat trefoil formation, SS316L, for cable diameter 40mm to 46mm, IEC61914-2021

Cable cleat, trefoil

Porovnat

CCT046-SS316L/PO-ML 151-05007

Porovnat

Přidat do sledovaných položek

Cable cleat, trefoil

Porovnat

Cable cleat trefoil formation, SS316L, for cable diameter 40mm to 46mm, IEC61914-2021

Porovnat

Přidat do sledovaných položek

1 pcs.

Metal (ML) CCT046-SS316L/PO-ML 151-05007

Cable cleat trefoil formation, SS316L, for cable diameters 44mm to 50mm, IEC61914-2021

Cable cleat, trefoil

Porovnat

CCT050-SS316L/PO-ML 151-05008

Porovnat

Přidat do sledovaných položek

Cable cleat, trefoil

Porovnat

Cable cleat trefoil formation, SS316L, for cable diameters 44mm to 50mm, IEC61914-2021

Porovnat

Přidat do sledovaných položek

1 pcs.

Metal (ML) CCT050-SS316L/PO-ML 151-05008

Cable cleat trefoil formation, SS316L, for cable diameters 51mm to 58mm, IEC61914-2021

Cable cleat, trefoil

Porovnat

CCT058-SS316L/PO-ML 151-05009

Porovnat

Přidat do sledovaných položek

Cable cleat, trefoil

Porovnat

Cable cleat trefoil formation, SS316L, for cable diameters 51mm to 58mm, IEC61914-2021

Porovnat

Přidat do sledovaných položek

1 pcs.

Metal (ML) CCT058-SS316L/PO-ML 151-05009

Cable cleat trefoil formation, SS316L, for cable diameters 55mm to 62mm, IEC61914-2021

Cable cleat, trefoil

Porovnat

CCT062-SS316L/PO-ML 151-05010

Porovnat

Přidat do sledovaných položek

Cable cleat, trefoil

Porovnat

Cable cleat trefoil formation, SS316L, for cable diameters 55mm to 62mm, IEC61914-2021

Porovnat

Přidat do sledovaných položek

1 pcs.

Metal (ML) CCT062-SS316L/PO-ML 151-05010

Cable cleat trefoil formation, SS316L, for cable diameters 59mm to 66mm, IEC61914-2021

Cable cleat, trefoil

Porovnat

CCT066-SS316L/PO-ML 151-05011

Porovnat

Přidat do sledovaných položek

Cable cleat, trefoil

Porovnat

Cable cleat trefoil formation, SS316L, for cable diameters 59mm to 66mm, IEC61914-2021

Porovnat

Přidat do sledovaných položek

1 pcs.

Metal (ML) CCT066-SS316L/PO-ML 151-05011

Cable cleat trefoil formation, SS316L, for cable diameters 63mm to 70mm, IEC61914-2021

Cable cleat, trefoil

Porovnat

CCT070-SS316L/PO-ML 151-05012

Porovnat

Přidat do sledovaných položek

Cable cleat, trefoil

Porovnat

Cable cleat trefoil formation, SS316L, for cable diameters 63mm to 70mm, IEC61914-2021

Porovnat

Přidat do sledovaných položek

1 pcs.

Metal (ML) CCT070-SS316L/PO-ML 151-05012

Cable cleat trefoil formation, SS316L, for cable diameters 67mm to 74mm, IEC61914-2021

Cable cleat, trefoil

Porovnat

CCT074-SS316L/PO-ML 151-05013

Porovnat

Přidat do sledovaných položek

Cable cleat, trefoil

Porovnat

Cable cleat trefoil formation, SS316L, for cable diameters 67mm to 74mm, IEC61914-2021

Porovnat

Přidat do sledovaných položek

1 pcs.

Metal (ML) CCT074-SS316L/PO-ML 151-05013

Cable cleat trefoil formation, SS316L, for cable diameters 71mm to 78mm, IEC61914-2021

Cable cleat, trefoil

Porovnat

CCT078-SS316L/PO-ML 151-05014

Porovnat

Přidat do sledovaných položek

Cable cleat, trefoil

Porovnat

Cable cleat trefoil formation, SS316L, for cable diameters 71mm to 78mm, IEC61914-2021

Porovnat

Přidat do sledovaných položek

1 pcs.

Metal (ML) CCT078-SS316L/PO-ML 151-05014

Cable cleat trefoil formation, SS316L, for cable diameters 74mm to 82mm, IEC61914-2021

Cable cleat, trefoil

Porovnat

CCT082-SS316L/PO-ML 151-05015

Porovnat

Přidat do sledovaných položek

Cable cleat, trefoil

Porovnat

Cable cleat trefoil formation, SS316L, for cable diameters 74mm to 82mm, IEC61914-2021

Porovnat

Přidat do sledovaných položek

1 pcs.

Metal (ML) CCT082-SS316L/PO-ML 151-05015

Cable cleat trefoil formation, SS316L, for cable diameters 77mm to 85mm, IEC61914-2021

Cable cleat, trefoil

Porovnat

CCT085-SS316L/PO-ML 151-05016

Porovnat

Přidat do sledovaných položek

Cable cleat, trefoil

Porovnat

Cable cleat trefoil formation, SS316L, for cable diameters 77mm to 85mm, IEC61914-2021

Porovnat

Přidat do sledovaných položek

1 pcs.

Metal (ML) CCT085-SS316L/PO-ML 151-05016

Cable cleat trefoil formation, SS316L, for cable diameters 82mm to 88mm, IEC61914-2021

Cable cleat, trefoil

Porovnat

CCT088-SS316L/PO-ML 151-05017

Porovnat

Přidat do sledovaných položek

Cable cleat, trefoil

Porovnat

Cable cleat trefoil formation, SS316L, for cable diameters 82mm to 88mm, IEC61914-2021

Porovnat

Přidat do sledovaných položek

1 pcs.

Metal (ML) CCT088-SS316L/PO-ML 151-05017

Cable cleat trefoil formation, SS316L, for cable diameters 88mm to 96mm, IEC61914-2021

Cable cleat, trefoil

Porovnat

CCT096-SS316L/PO-ML 151-05018

Porovnat

Přidat do sledovaných položek

Cable cleat, trefoil

Porovnat

Cable cleat trefoil formation, SS316L, for cable diameters 88mm to 96mm, IEC61914-2021

Porovnat

Přidat do sledovaných položek

1 pcs.

Metal (ML) CCT096-SS316L/PO-ML 151-05018

Cable cleat trefoil formation, SS316L, for cable diameters 96mm to 103mm, IEC61914-2021

Cable cleat, trefoil

Porovnat

CCT103-SS316L/PO-ML 151-05019

Porovnat

Přidat do sledovaných položek

Cable cleat, trefoil

Porovnat

Cable cleat trefoil formation, SS316L, for cable diameters 96mm to 103mm, IEC61914-2021

Porovnat

Přidat do sledovaných položek

1 pcs.

Metal (ML) CCT103-SS316L/PO-ML 151-05019

Cable cleat trefoil formation, SS316L, for cable diameters 103mm to 111mm, IEC61914-2021

Cable cleat, trefoil

Porovnat

CCT111-SS316L/PO-ML 151-05020

Porovnat

Přidat do sledovaných položek

Cable cleat, trefoil

Porovnat

Cable cleat trefoil formation, SS316L, for cable diameters 103mm to 111mm, IEC61914-2021

Porovnat

Přidat do sledovaných položek

1 pcs.

Metal (ML) CCT111-SS316L/PO-ML 151-05020

Výsledky pro "Cable Clamp" v Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Czech Republic

Zásady ochrany osobních údajů

Sociální média

© HellermannTyton 2026 (v4.312.3) | Aktualizace: 09/08/2026 | Nastavení ochrany osobních údajů

Hledat prodejce Kontakt

‹ › ×