Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
10/10/2025

Výsledky pro "Cable Clips" v Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

1 065 produkty
Resetovat vše
Bundling clip for edge, L=40.0mm, black, 500pcs.
Tape bar provides a convenient surface for securing a bundle using a cable tie or tape.
Porovnat
Bundling clip for edge, L=40.0mm, black, 500pcs.
EC14-PA66HIRHS-BK 151-03404
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) EC14-PA66HIRHS-BK 151-03404
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19mm, Dmax=28mm
Porovnat
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19mm, Dmax=28mm
AHC3CH2-PA66HIRHS-BK 151-00937
Porovnat
Přidat do sledovaných položek
450 pcs.
Black (BK) AHC3CH2-PA66HIRHS-BK 151-00937
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=32.0mm, Dmax=37.5mm
Porovnat
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=32.0mm, Dmax=37.5mm
AHC45BHG2-PA46-GY 151-01377
Porovnat
Přidat do sledovaných položek
700 pcs.
Grey (GY) AHC45BHG2-PA46-GY 151-01377
Backshell, nom⌀4.5mm, black, 1500pcs.
Connector backshell for convoluted tube.
Porovnat
Backshell, nom⌀4.5mm, black, 1500pcs.
BSRB4KPT90NW4.5-PA66HIRHS-BK 151-03388
Porovnat
Přidat do sledovaných položek
1500 pcs.
Black (BK) BSRB4KPT90NW4.5-PA66HIRHS-BK 151-03388
Cable clip for hole (round), T=1.0 - 3.0mm, ⌀6.1 - 6.6 mm, Dmax=12.0mm
Harness clip made of polypropylyne with arrow head for round holes 6.3 mm.
Porovnat
Cable clip for hole (round), T=1.0 - 3.0mm, ⌀6.1 - 6.6 mm, Dmax=12.0mm
HC10.5WPM6.3-PP-BK 151-03957
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) HC10.5WPM6.3-PP-BK 151-03957
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, natural, 1000pcs.
H7P-PA66-NA 211-60079
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) H7P-PA66-NA 211-60079
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=35.0mm, Dmax=45.0mm
IAHC( )AH in combination with an IAHC( )T.
Porovnat
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=35.0mm, Dmax=45.0mm
IAHC5FH-PA66HIRHS-BK 151-00787
Porovnat
Přidat do sledovaných položek
350 pcs.
Black (BK) IAHC5FH-PA66HIRHS-BK 151-00787
Cable clip for hole (oval), T=1.8 - 4.8mm, ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
Porovnat
Cable clip for hole (oval), T=1.8 - 4.8mm, ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
AHC3EH2-PA66HIRHS-BK 151-00928
Porovnat
Přidat do sledovaných položek
800 pcs.
Black (BK) AHC3EH2-PA66HIRHS-BK 151-00928
Connector clip for hole (round), black, 500pcs.
Connector Clip for Connectors with AMP connection, with fir tree for round holes.
Porovnat
Connector clip for hole (round), black, 500pcs.
FT6LG-AMP-PA66HIRHS-BK 155-03800
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) FT6LG-AMP-PA66HIRHS-BK 155-03800
Connector clip for hole (round), black, 500pcs.
Porovnat
Connector clip for hole (round), black, 500pcs.
FT6LG.YAZ.CONNECT-TS-PA66HIRHS-BK 155-30702
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) FT6LG.YAZ.CONNECT-TS-PA66HIRHS-BK 155-30702
Bundling clip for hole (round), L=50.0mm, black, 4000
The 90-degree configuration of this mini channel provides routing for a wire harness around a corner.
Porovnat
Bundling clip for hole (round), L=50.0mm, black, 4000
BC90FT6-PA66HIRHSUV-BK 151-00993
Porovnat
Přidat do sledovaných položek
4000
Black (BK) BC90FT6-PA66HIRHSUV-BK 151-00993
Bundling clip for hole (round), L=50.0mm, black, 4000pcs.
Porovnat
Bundling clip for hole (round), L=50.0mm, black, 4000pcs.
BC90FT6B-PA66HIRHSUV-BK 151-01051
Porovnat
Přidat do sledovaných položek
4000 pcs.
Black (BK) BC90FT6B-PA66HIRHSUV-BK 151-01051
Protection cap for connectors, black, 600pcs.
Connector Clips are available for many different connector types and fixing varieties.
Porovnat
Protection cap for connectors, black, 600pcs.
9632910680-PA6HIR-BK 151-00339
Porovnat
Přidat do sledovaných položek
600 pcs.
Black (BK) 9632910680-PA6HIR-BK 151-00339
Connector clip, EWCAP-005-7, black, 5000pcs.
Porovnat
Connector clip, EWCAP-005-7, black, 5000pcs.
EC54-PA66HIRHSUV-BK 151-01042
Porovnat
Přidat do sledovaných položek
5000 pcs.
Black (BK) EC54-PA66HIRHSUV-BK 151-01042
Cable clip for screw fixation, ⌀3.1 mm
FKH30 mounts are designed to retain flat ribbon cables.
Porovnat
Cable clip for screw fixation, ⌀3.1 mm
FKH30-PA66HIR-BK 151-16300
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) FKH30-PA66HIR-BK 151-16300
Cable clip for adhesive use/with pipe/tube holder, Dmax=4.0mm
Porovnat
Cable clip for adhesive use/with pipe/tube holder, Dmax=4.0mm
SAC1-ST-WH 151-00100
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) SAC1-ST-WH 151-00100
Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm
Porovnat
Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm
SAC2-ST-WH 151-00200
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) SAC2-ST-WH 151-00200
Cable clip for adhesive use/with pipe/tube holder, Dmax=12.0mm
Porovnat
Cable clip for adhesive use/with pipe/tube holder, Dmax=12.0mm
SAC3-ST-WH 151-00300
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) SAC3-ST-WH 151-00300
Cable clip for stud, Dmin=12.5mm, Dmax=13.5mm, ⌀5.0 mm
Clips interlock to expand installation options.
Porovnat
Cable clip for stud, Dmin=12.5mm, Dmax=13.5mm, ⌀5.0 mm
IPC13P-PA66-BK 151-00868
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) IPC13P-PA66-BK 151-00868
Cable clip for stud, Dmin=21.0mm, Dmax=25.0mm, ⌀5.0 mm
Clips interlock to expand installation options.
Porovnat
Cable clip for stud, Dmin=21.0mm, Dmax=25.0mm, ⌀5.0 mm
IPC23P-PA66-BK 151-00869
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) IPC23P-PA66-BK 151-00869
Cable clip for hole (round), ⌀6.5 mm, Dmin=4.5mm, Dmax=16mm
Harness clip OHC8 for pre assembling on harnesses.
Porovnat
Cable clip for hole (round), ⌀6.5 mm, Dmin=4.5mm, Dmax=16mm
OHC16-PA66HIRHS-BK 151-00335
Porovnat
Přidat do sledovaných položek
2000 pcs.
Black (BK) OHC16-PA66HIRHS-BK 151-00335
Cable clip for hole (oval), T=0.7-2.5mm, ⌀6.2 x 12.2 mm, Dmin=3.0mm, Dmax=15.0mm
Harness clip HC90SFT for oval holes and varying bundle diameter.
Porovnat
Cable clip for hole (oval), T=0.7-2.5mm, ⌀6.2 x 12.2 mm, Dmin=3.0mm, Dmax=15.0mm
HC90SFT62x122-PA6HIR-BK 151-00164
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) HC90SFT62x122-PA6HIR-BK 151-00164
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=11.0mm, Dmax=20.0mm
Automatic Harness Clip AHC2BH open.
Porovnat
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=11.0mm, Dmax=20.0mm
AHC2BH-PA66HIRHS-BK 151-02882
Porovnat
Přidat do sledovaných položek
900 pcs.
Black (BK) AHC2BH-PA66HIRHS-BK 151-02882
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=17.0mm, Dmax=28.0mm
Porovnat
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=17.0mm, Dmax=28.0mm
AHC3DH-PA66HIRHS-BK 151-00181
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) AHC3DH-PA66HIRHS-BK 151-00181
Cable clip for hole (oval), T=0.5 - 3.5mm, ⌀6.2 x 12.2 mm, Dmin=12.0mm, Dmax=16.0mm
Porovnat
Cable clip for hole (oval), T=0.5 - 3.5mm, ⌀6.2 x 12.2 mm, Dmin=12.0mm, Dmax=16.0mm
HC140SFT62x122-PA6HIR-BK 151-00423
Porovnat
Přidat do sledovaných položek
1200 pcs.
Black (BK) HC140SFT62x122-PA6HIR-BK 151-00423
Cable clip, ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
IAHC( )AH in combination with an IAHC( )T.
Porovnat
Cable clip, ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
IAHC3BH-PA66HIRHS-BK 151-00380
Porovnat
Přidat do sledovaných položek
650 pcs.
Black (BK) IAHC3BH-PA66HIRHS-BK 151-00380
Cable clip for screw fixation, ⌀3.1 mm
FKH80 are designed to retain flat ribbon cables.
Porovnat
Cable clip for screw fixation, ⌀3.1 mm
FKH80-PA66HIR-BK 151-16800
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) FKH80-PA66HIR-BK 151-16800
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.
ALU12-AL-NA 211-10120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU12-AL-NA 211-10120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.
ALU13-AL-NA 211-10130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU13-AL-NA 211-10130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Bundling clip, L=39.0mm, black, 500pcs.
Porovnat
Bundling clip, L=39.0mm, black, 500pcs.
ATSBC2KSFT6.5-PA66HIRHS-BK 102-69068
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) ATSBC2KSFT6.5-PA66HIRHS-BK 102-69068
P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, natural, 1000pcs.
H1P-PA66-NA 211-60019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) H1P-PA66-NA 211-60019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 1000pcs.
H5P-PA66-NA 211-60059
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) H5P-PA66-NA 211-60059
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, natural, 1000pcs.
H6P-PA66-NA 211-60069
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) H6P-PA66-NA 211-60069
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip, T=0.65 - 0.85 mm
0.6 - 4.2mm, ⌀4.9 – 5.1 mm/6.4 - 7.0 mm
Couple Connector for hole 4.9 - 5.1 mm and for hole 6.4- 7.0 mm.
Porovnat
Cable clip, T=0.65 - 0.85 mm
0.6 - 4.2mm, ⌀4.9 – 5.1 mm/6.4 - 7.0 mm
AH5.0FT6.7-PA66HIRHS-BK 151-03386
Porovnat
Přidat do sledovaných položek
2500 pcs.
Black (BK) AH5.0FT6.7-PA66HIRHS-BK 151-03386
Cable clip for edge, T=1.0 - 3.0mm, Dmin=6.5mm, Dmax=8.5mm
EdgeClip with Twist Lock.
Porovnat
Cable clip for edge, T=1.0 - 3.0mm, Dmin=6.5mm, Dmax=8.5mm
EC1-3TL7OTP-PA66HIRHS-BK 151-02588
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) EC1-3TL7OTP-PA66HIRHS-BK 151-02588
Cable clip for screw fixation, ⌀3.1 mm
FKH25 are designed to retain flat ribbon cables.
Porovnat
Cable clip for screw fixation, ⌀3.1 mm
FKH25-PA66HIR-BK 151-16250
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) FKH25-PA66HIR-BK 151-16250
Cable clip for screw fixation, ⌀3.1 mm
FKH50 are designed to retain flat ribbon cables.
Porovnat
Cable clip for screw fixation, ⌀3.1 mm
FKH50-PA66HIR-BK 151-16500
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) FKH50-PA66HIR-BK 151-16500
Cable clip for stud, ⌀6.35 mm, Dmin=12.5mm, Dmax=13.5mm, ⌀5.0 mm
Clips interlock to expand installation options.
Porovnat
Cable clip for stud, ⌀6.35 mm, Dmin=12.5mm, Dmax=13.5mm, ⌀5.0 mm
IPC13P-PA66-BK 151-14132
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) IPC13P-PA66-BK 151-14132
Cable clip, T=1.3 - 2.3mm, ⌀4.7 - 4.9 mm, Dmin=11.0mm, Dmax=12.0mm, nom⌀=11.5
Arrowhead clip with TwistLock.
Porovnat
Cable clip, T=1.3 - 2.3mm, ⌀4.7 - 4.9 mm, Dmin=11.0mm, Dmax=12.0mm, nom⌀=11.5
HTS9-PA66-BK 151-00725
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) HTS9-PA66-BK 151-00725
Backshell, 90°, nom⌀17.0mm, black, 800pcs.
Backshell (V0)
Porovnat
Backshell, 90°, nom⌀17.0mm, black, 800pcs.
BSE90NW17-PA66/PA6FR-BK 151-02772
Porovnat
Přidat do sledovaných položek
800 pcs.
Black (BK) BSE90NW17-PA66/PA6FR-BK 151-02772
Cable clip for adhesive use, ⌀3.1 mm
FKH Flat ribbon cable clip, screwable.
Porovnat
Cable clip for adhesive use, ⌀3.1 mm
FKH25A-PA66HIR-BK 151-15250
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) FKH25A-PA66HIR-BK 151-15250
Cable clip for adhesive use, ⌀3.1 mm
FKH30 mounts are designed to retain flat ribbon cables.
Porovnat
Cable clip for adhesive use, ⌀3.1 mm
FKH30A-PA66HIR-BK 151-15300
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) FKH30A-PA66HIR-BK 151-15300
Cable clip for adhesive use, ⌀3.1 mm
FKH50 are designed to retain flat ribbon cables.
Porovnat
Cable clip for adhesive use, ⌀3.1 mm
FKH50A-PA66HIR-BK 151-15500
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) FKH50A-PA66HIR-BK 151-15500
Cable clip, ⌀6.5 - 7.0 mm
Porovnat
Cable clip, ⌀6.5 - 7.0 mm
FT6LGSTUD5-PA66HIRHS-BK 151-00318
Porovnat
Přidat do sledovaných položek
2500 pcs.
Black (BK) FT6LGSTUD5-PA66HIRHS-BK 151-00318
Cable clip for hole (round), ⌀6.2 - 6.7 mm, Dmin=11mm, Dmax=20mm
Automatic Harness Clips offer a simple and secure method of attaching cables to panels and other surfaces.
Porovnat
Cable clip for hole (round), ⌀6.2 - 6.7 mm, Dmin=11mm, Dmax=20mm
AHC2AH-PA66HIRHS-BK 151-02881
Porovnat
Přidat do sledovaných položek
900 pcs.
Black (BK) AHC2AH-PA66HIRHS-BK 151-02881
Cable clip for hole (round), ⌀6.5 mm, Dmin=27.0mm, Dmax=41.5mm
Automatic Harness Clip Family for oval holes.
Porovnat
Cable clip for hole (round), ⌀6.5 mm, Dmin=27.0mm, Dmax=41.5mm
AHC4AH-PA66HIRHS-BK 151-00374
Porovnat
Přidat do sledovaných položek
400 pcs.
Black (BK) AHC4AH-PA66HIRHS-BK 151-00374
Blind plug, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, T=0.6 - 6.0mm, black, 7000pcs.
Disc surrounding push pin minimizes the ingress of dust, dirt and water.
Porovnat
Blind plug, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, T=0.6 - 6.0mm, black, 7000pcs.
PLUGFTOVAL-PA66HIRHSUV-BK 151-01245
Porovnat
Přidat do sledovaných položek
7000 pcs.
Black (BK) PLUGFTOVAL-PA66HIRHSUV-BK 151-01245
Connector clip for hole (oval), EWCAP-005-11, black, 1000pcs.
Connector clip designed to meet USCAR EWCAP -005-11 clip slot specifications.
Porovnat
Connector clip for hole (oval), EWCAP-005-11, black, 1000pcs.
CCOVAL6-PA66HIRHSUV-BK 151-01033
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) CCOVAL6-PA66HIRHSUV-BK 151-01033
Cable clip for adhesive use/with pipe/tube holder, Dmax=13.0mm
Self adhesive one piece fixing clips RA- & RB-Series.
Porovnat
Cable clip for adhesive use/with pipe/tube holder, Dmax=13.0mm
RA13-PA66-BK 151-00121
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) RA13-PA66-BK 151-00121
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C P-Clamp with chloroprene insert.
Porovnat
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for stud
Porovnat
Cable clip for stud
FTS5STUD5-PA66HIRHS-BK 151-00341
Porovnat
Přidat do sledovaných položek
2500 pcs.
Black (BK) FTS5STUD5-PA66HIRHS-BK 151-00341
Cable clip for edge
Suitable for low vibration routing of cables and tubes with larger bundling diameters.
Porovnat
Cable clip for edge
EC41-PA6HIR-BK 151-00234
Porovnat
Přidat do sledovaných položek
750 pcs.
Black (BK) EC41-PA6HIR-BK 151-00234
Cable clip for hole (round)/with pipe/tube holder, ⌀6.4 - 7.1 mm, Dmin=8mm, Dmax=12mm
Porovnat
Cable clip for hole (round)/with pipe/tube holder, ⌀6.4 - 7.1 mm, Dmin=8mm, Dmax=12mm
ICD8x12SFT65STUD5-PA66HIRHS-BK 156-00165
Porovnat
Přidat do sledovaných položek
1500 pcs.
Black (BK) ICD8x12SFT65STUD5-PA66HIRHS-BK 156-00165
Fixing tie for edge, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
EdgeClip CBTO50R, rotatable 90°.
Porovnat
Fixing tie for edge, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
CBTO30R-PA66HS/PA66HIRHS-BK 156-01320
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) CBTO30R-PA66HS/PA66HIRHS-BK 156-01320
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
Automatic Harness Clip Family for oval holes.
Porovnat
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
AHC3BHR-PA66HIRHS-BK 151-00370
Porovnat
Přidat do sledovaných položek
400 pcs.
Black (BK) AHC3BHR-PA66HIRHS-BK 151-00370
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
Porovnat
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
AHC3CHR-PA6HIR-BK 151-00371
Porovnat
Přidat do sledovaných položek
400 pcs.
Black (BK) AHC3CHR-PA6HIR-BK 151-00371
Cable clip for hole (round), T=0.5-2.5mm, ⌀6.2 - 6.7 mm, Dmin=27.0mm, Dmax=36.0mm
Automatic Harness Clips offer a simple and secure method of attaching cables to panels and other surfaces.
Porovnat
Cable clip for hole (round), T=0.5-2.5mm, ⌀6.2 - 6.7 mm, Dmin=27.0mm, Dmax=36.0mm
IAHC4AH-PA66HIRHS-BK 151-00382
Porovnat
Přidat do sledovaných položek
450 pcs.
Black (BK) IAHC4AH-PA66HIRHS-BK 151-00382
Cable clip for hole (oval), T=0.5 - 2.5mm, ⌀6.2 x 12.2 mm, Dmin=35.0mm, Dmax=45.0mm
Porovnat
Cable clip for hole (oval), T=0.5 - 2.5mm, ⌀6.2 x 12.2 mm, Dmin=35.0mm, Dmax=45.0mm
IAHC5BH-PA66HIRHS-BK 151-00384
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) IAHC5BH-PA66HIRHS-BK 151-00384
Cable clip, T=0.8 - 10.0mm, ⌀6.3 - 7.0 mm
Porovnat
Cable clip, T=0.8 - 10.0mm, ⌀6.3 - 7.0 mm
FT6.5LGOC5-9-PA66HIRHS-BK 151-01271
Porovnat
Přidat do sledovaných položek
250 pcs.
Black (BK) FT6.5LGOC5-9-PA66HIRHS-BK 151-01271
Cable tie mount for edge, T=1.0 - 3.0mm, black, 500pcs.
Porovnat
Cable tie mount for edge, T=1.0 - 3.0mm, black, 500pcs.
EC33-PA66HIRHS-BK 151-00192
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) EC33-PA66HIRHS-BK 151-00192
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, natural, 1000pcs.
H3P-PA66-NA 211-60039
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) H3P-PA66-NA 211-60039
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, natural, 1000pcs.
H4P-PA66-NA 211-60049
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) H4P-PA66-NA 211-60049
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for adhesive use/with pipe/tube holder, ⌀3.2 mm, Dmax=3.0mm
Ideal for holding ribbon cables in computer equipment, gaming machines or domestic appliances.
Porovnat
Cable clip for adhesive use/with pipe/tube holder, ⌀3.2 mm, Dmax=3.0mm
TY8H1S-PA66-NA 151-12819
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) TY8H1S-PA66-NA 151-12819
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
The holding tab increases the tensile strength additionaly.
Porovnat
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSCST-PA66HS/PA66HIRHS-BK 156-00620
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROSCST-PA66HS/PA66HIRHS-BK 156-00620
Cable clip for edge, Dmin=4.5mm, Dmax=5.0mm
Porovnat
Cable clip for edge, Dmin=4.5mm, Dmax=5.0mm
HCEC3.0TPS-PA66HIRHS-BK 151-00645
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) HCEC3.0TPS-PA66HIRHS-BK 151-00645
Cable clip for hole (round), T=0.7-2.2mm, ⌀6.2 - 6.7 mm, Dmin=3.0mm, Dmax=13.0mm
Automatic Harness Clip Family for oval holes.
Porovnat
Cable clip for hole (round), T=0.7-2.2mm, ⌀6.2 - 6.7 mm, Dmin=3.0mm, Dmax=13.0mm
AHC1AH-PA66HIRHS-BK 151-02874
Porovnat
Přidat do sledovaných položek
1500 pcs.
Black (BK) AHC1AH-PA66HIRHS-BK 151-02874
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
IAHC( )AH in combination with an IAHC( )T.
Porovnat
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
IAHC3CH-PA66HIRHS-BK 151-00381
Porovnat
Přidat do sledovaných položek
450 pcs.
Black (BK) IAHC3CH-PA66HIRHS-BK 151-00381
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=27.0mm, Dmax=36.0mm
Porovnat
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=27.0mm, Dmax=36.0mm
IAHC4CH-PA6HIRHS-BK 151-00383
Porovnat
Přidat do sledovaných položek
450 pcs.
Black (BK) IAHC4CH-PA6HIRHS-BK 151-00383
Cable clip for adhesive use/with pipe/tube holder, Dmax=18.0mm
Self adhesive one piece fixing clips RA- & RB-Series.
Porovnat
Cable clip for adhesive use/with pipe/tube holder, Dmax=18.0mm
RA18-PA66-NA 151-13119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) RA18-PA66-NA 151-13119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for adhesive use/with pipe/tube holder, Dmax=3.0mm
Self adhesive one piece fixing clips RA- & RB-Series.
Porovnat
Cable clip for adhesive use/with pipe/tube holder, Dmax=3.0mm
RA3-PA66-NA 151-13018
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) RA3-PA66-NA 151-13018
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Bundling clip, L=39.0mm, black, 500pcs.
Porovnat
Bundling clip, L=39.0mm, black, 500pcs.
ATSBCKSFT6.5-PA66HIRHS-BK 102-69067
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) ATSBCKSFT6.5-PA66HIRHS-BK 102-69067
Fixing tie for edge, ⌀3.0-42.0mm, black, 1000pcs.
EdgeClip T50ROSEC1-3RO90, offset 3 mm and rotatable 90°.
Porovnat
Fixing tie for edge, ⌀3.0-42.0mm, black, 1000pcs.
T50ROSEC1-3RO90SO3-PA66HS/PA66HIRHS-BK 156-04014
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) T50ROSEC1-3RO90SO3-PA66HS/PA66HIRHS-BK 156-04014
Fixing tie for edge, ⌀1.5-35.0mm, black, 500pcs.
EdgeClip CBTO50R, rotatable 90°.
Porovnat
Fixing tie for edge, ⌀1.5-35.0mm, black, 500pcs.
T50SVCEC1-3-PA66HS/PA66HIRHS-BK 156-01584
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SVCEC1-3-PA66HS/PA66HIRHS-BK 156-01584
Bundling clip for hole (round), L=55.0mm, black, 14000pcs.
Bundle fastens onto the tape bar using cable ties or tape.
Porovnat
Bundling clip for hole (round), L=55.0mm, black, 14000pcs.
TC2FT6LG-PA66HIRHS-BK 155-30802
Porovnat
Přidat do sledovaných položek
14000 pcs.
Black (BK) TC2FT6LG-PA66HIRHS-BK 155-30802
Omegaclip 1-PA66HIRHS-BK
Porovnat
Omegaclip 1-PA66HIRHS-BK
Omegaclip 1-PA66HIRHS-BK 151-00007
Porovnat
Přidat do sledovaných položek
10000 pcs.
Black (BK) Omegaclip 1-PA66HIRHS-BK 151-00007

Výsledky pro "Cable Clips" v Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Facebook  Instagram  Twitter  YouTube  LinkedIn  Corporate Blog 
Kontakt VOP Impressum Mapa stránek Newsletter Pokyny a závazky Zásady ochrany osobních údajů
Aktualizace: 05/10/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.288.1) | Aktualizace: 05/10/2025 | Nastavení ochrany osobních údajů
Hledat prodejce Kontakt