Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
24/08/2025

Výsledky pro "RA-, RB- and SAC-Series clips" v Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Poznámka:  Kombinace hledaných výrazů nevrátila žádné odpovídající výsledky.  Níže jsou výsledky, které odpovídají dílům dle Vašeho vyhledávání.

Typ: Zkuste změnit nebo odstranit výrazy, abyste zlepšili relevanci výsledků vyhledávání.

2 713 produkty
Resetovat vše
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
The holding tab increases the tensile strength additionaly.
Porovnat
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSCST-PA66HS/PA66HIRHS-BK 156-00620
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROSCST-PA66HS/PA66HIRHS-BK 156-00620
Protection cap for connectors, black, 3000pcs.
Protection cap male.
Porovnat
Protection cap for connectors, black, 3000pcs.
CPBM-PA66/PA6FR-BK 151-02849
Porovnat
Přidat do sledovaných položek
3000 pcs.
Black (BK) CPBM-PA66/PA6FR-BK 151-02849
Protection cap for connectors, black, 2500pcs.
Protection Cap with sealing.
Porovnat
Protection cap for connectors, black, 2500pcs.
CPCM-PA66/PA6FR-BK 151-02851
Porovnat
Přidat do sledovaných položek
2500 pcs.
Black (BK) CPCM-PA66/PA6FR-BK 151-02851
Protection cap for connectors, black, 2000
Protection cap male.
Porovnat
Protection cap for connectors, black, 2000
CPDM-PA66/PA6FR-BK 151-02853
Porovnat
Přidat do sledovaných položek
2000 pcs.
Black (BK) CPDM-PA66/PA6FR-BK 151-02853
Protection cap for connectors, black, 2000
Protection cap male.
Porovnat
Protection cap for connectors, black, 2000
CPEM-PA66/PA6FR-BK 151-02855
Porovnat
Přidat do sledovaných položek
2000 pcs.
Black (BK) CPEM-PA66/PA6FR-BK 151-02855
Protection cap for connectors, black, 4000
Protection cap female mounted at a connector.
Porovnat
Protection cap for connectors, black, 4000
CPAM-PA66/PA6FR-BK 151-02847
Porovnat
Přidat do sledovaných položek
4000 pcs.
Black (BK) CPAM-PA66/PA6FR-BK 151-02847
90RADMINICHNL-PPTD20-BK
Angled mini channel provides safe routing of wires around corners or obstructions
Porovnat
90RADMINICHNL-PPTD20-BK
90RADMINICHNL-PPTD20-BK 151-02061
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) 90RADMINICHNL-PPTD20-BK 151-02061
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for hole (round)/with pipe/tube holder, ⌀6.4 - 7.1 mm, Dmin=8mm, Dmax=12mm
Porovnat
Cable clip for hole (round)/with pipe/tube holder, ⌀6.4 - 7.1 mm, Dmin=8mm, Dmax=12mm
ICD8x12SFT65STUD5-PA66HIRHS-BK 156-00165
Porovnat
Přidat do sledovaných položek
1500 pcs.
Black (BK) ICD8x12SFT65STUD5-PA66HIRHS-BK 156-00165
Bundling clip, natural/yellow, 50pcs.
Porovnat
Bundling clip, natural/yellow, 50pcs.
RC-90YR-PA66-NA/YE 156-04132
Porovnat
Přidat do sledovaných položek
50 pcs.
Natural (NA), Yellow (YE) RC-90YR-PA66-NA/YE 156-04132
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C P-Clamp with chloroprene insert.
Porovnat
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, natural, 1000pcs.
H1P-PA66-NA 211-60019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) H1P-PA66-NA 211-60019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 1000pcs.
H5P-PA66-NA 211-60059
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) H5P-PA66-NA 211-60059
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, natural, 1000pcs.
H6P-PA66-NA 211-60069
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) H6P-PA66-NA 211-60069
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=63.0mm, Dmax=80.0mm, ⌀8.31 mm, 180°, black, 90pcs.
Porovnat
P-clamp short, Dmin=63.0mm, Dmax=80.0mm, ⌀8.31 mm, 180°, black, 90pcs.
RCF180SM8SS-PA66HIRHSUV/SS304-BK 151-03122
Porovnat
Přidat do sledovaných položek
90 pcs.
Black (BK) RCF180SM8SS-PA66HIRHSUV/SS304-BK 151-03122
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 180°, black, 300pcs.
RCA180SM10.
Porovnat
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 180°, black, 300pcs.
RCA180SM10-PA66ECHIRHS/ST/ZN-BK 151-01678
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) RCA180SM10-PA66ECHIRHS/ST/ZN-BK 151-01678
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.4 mm, 180°, black, 140pcs.
RCD180LM10.
Porovnat
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.4 mm, 180°, black, 140pcs.
RCD180LM10SS-PA666V0/SS304-BK 151-03007
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD180LM10SS-PA666V0/SS304-BK 151-03007
Connector clip for edge, EWCAP-005-11, black, 500pcs.
Porovnat
Connector clip for edge, EWCAP-005-11, black, 500pcs.
EC43-PA66HIRHS-BK 151-00430
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) EC43-PA66HIRHS-BK 151-00430
Cable clip for edge, T=3.0 - 6.0mm
Fixing element for parallel routing with edge clip 3-6mm.
Porovnat
Cable clip for edge, T=3.0 - 6.0mm
DLOC8EC3-6-PA6-BK 151-02863
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) DLOC8EC3-6-PA6-BK 151-02863
Bundling clip, natural/yellow, 1000pcs.
Porovnat
Bundling clip, natural/yellow, 1000pcs.
RC-90YR-NR/PA66-NA/YE 156-00776
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA), Yellow (YE) RC-90YR-NR/PA66-NA/YE 156-00776
Mini cable channel, 180°, for cable bundles, L=50.0mm, black, 3000pcs.
U-shape channel provides three sides of protection for wire or cables.
Porovnat
Mini cable channel, 180°, for cable bundles, L=50.0mm, black, 3000pcs.
MINICHNLU-PPTD20-BK 133-01476
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
3000 pcs.
Black (BK) MINICHNLU-PPTD20-BK 133-01476
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Blind plug, ⌀11.0 mm, black, 1500pcs.
Porovnat
Blind plug, ⌀11.0 mm, black, 1500pcs.
PLUG11-POM-BK 151-00360
Porovnat
Přidat do sledovaných položek
1500 pcs.
Black (BK) PLUG11-POM-BK 151-00360
Blind plug, ⌀5.0 mm, natural, 1200pcs.
Blindplugs are available in different dimensions and materials.
Porovnat
Blind plug, ⌀5.0 mm, natural, 1200pcs.
TRIM PLUG 5-PA66HIR-NA 151-00333
Porovnat
Přidat do sledovaných položek
1200 pcs.
Natural (NA) TRIM PLUG 5-PA66HIR-NA 151-00333
Blind plug, ⌀34.6 x 112.0 mm, black, 400pcs.
Blindplugs are available in different dimensions and materials.
Porovnat
Blind plug, ⌀34.6 x 112.0 mm, black, 400pcs.
OPEN PLUG 34.6x112-PA66HIR-BK 151-00394
Porovnat
Přidat do sledovaných položek
400 pcs.
Black (BK) OPEN PLUG 34.6x112-PA66HIR-BK 151-00394
Blind plug, ⌀32.0 mm, black, 1500pcs.
Blindplugs are available in different dimensions and materials.
Porovnat
Blind plug, ⌀32.0 mm, black, 1500pcs.
Cover Plug 32-EPDM-BK 151-00424
Porovnat
Přidat do sledovaných položek
1500 pcs.
Black (BK) Cover Plug 32-EPDM-BK 151-00424
Blind plug, ⌀8.3 - 8.5 mm, T=0.7-0.9mm, natural, 500pcs.
Blindplugs are available in different dimensions and materials.
Porovnat
Blind plug, ⌀8.3 - 8.5 mm, T=0.7-0.9mm, natural, 500pcs.
PLUGSFT8.4-POM-NA 151-01114
Porovnat
Přidat do sledovaných položek
500 pcs.
Natural (NA) PLUGSFT8.4-POM-NA 151-01114
Fixing tie for edge, inside serrated, ⌀4.0-40.0mm, black, 500pcs.
The holding tab increases the tensile strength additionaly.
Porovnat
Fixing tie for edge, inside serrated, ⌀4.0-40.0mm, black, 500pcs.
T50REC2.5B-PA66HS/PA66HIRHS-BK 150-45292
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50REC2.5B-PA66HS/PA66HIRHS-BK 150-45292
Fixing tie for edge, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
EdgeClip CBTO50R, rotatable 90°.
Porovnat
Fixing tie for edge, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
CBTO30R-PA66HS/PA66HIRHS-BK 156-01320
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) CBTO30R-PA66HS/PA66HIRHS-BK 156-01320
Cable clip, Dmax=6.0mm
Bracket KBLS for parallel cable routing.
Porovnat
Cable clip, Dmax=6.0mm
Cable Clip-PA46-GY 151-14202
Porovnat
Přidat do sledovaných položek
1000 pcs.
Grey (GY) Cable Clip-PA46-GY 151-14202
Connector clip for edge, EWCAP-005-11, black, 500pcs.
Suitable for low vibration routing of cables and tubes with larger bundling diameters.
Porovnat
Connector clip for edge, EWCAP-005-11, black, 500pcs.
EC42-PA66HIRHS-BK 151-00429
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) EC42-PA66HIRHS-BK 151-00429
Blind plug, ⌀11.0 mm, natural, 1500pcs.
Porovnat
Blind plug, ⌀11.0 mm, natural, 1500pcs.
PLUG11-PA66HIRHS-NA 151-00485
Porovnat
Přidat do sledovaných položek
1500 pcs.
Natural (NA) PLUG11-PA66HIRHS-NA 151-00485
Blind plug, ⌀42.0 x 84.0 mm, black, 500pcs.
Blindplugs are available in different dimensions and materials.
Porovnat
Blind plug, ⌀42.0 x 84.0 mm, black, 500pcs.
Open Plug 42x84-PA6HIR-BK 151-00391
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) Open Plug 42x84-PA6HIR-BK 151-00391
Blind plug, ⌀5.0 - 5.5 mm, black, 500pcs.
Blindplugs are available in different dimensions and materials.
Porovnat
Blind plug, ⌀5.0 - 5.5 mm, black, 500pcs.
PLUG5.5-PA6HIR-BK 151-00399
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) PLUG5.5-PA6HIR-BK 151-00399
Blind plug, ⌀5.0 - 5.5 mm, grey, 2000pcs.
Blindplugs are available in different dimensions and materials.
Porovnat
Blind plug, ⌀5.0 - 5.5 mm, grey, 2000pcs.
PLUG5.5-PA6HIR-GY 151-00401
Porovnat
Přidat do sledovaných položek
2000 pcs.
Grey (GY) PLUG5.5-PA6HIR-GY 151-00401
Blind plug, ⌀7.05 - 7.25 mm, black, 2500pcs.
Blindplugs are available in different dimensions and materials.
Porovnat
Blind plug, ⌀7.05 - 7.25 mm, black, 2500pcs.
PLUGFT7-PA6HIR-BK 151-00414
Porovnat
Přidat do sledovaných položek
2500 pcs.
Black (BK) PLUGFT7-PA6HIR-BK 151-00414
Cable clip
Dual pipe clip secures two routings together while keeping them separated, to prevent chafing or heat transfer.
Porovnat
Cable clip
PC6.5X2-PA66HIRHSUV-BK 133-03187
Porovnat
Přidat do sledovaných položek
3000 pcs.
Black (BK) PC6.5X2-PA66HIRHSUV-BK 133-03187
Cable clip
Triple pipe clip secures three routings together while keeping them separated, to prevent chafing or heat transfer.
Porovnat
Cable clip
PC5X3-PA66HIRHSUV-BK 133-03188
Porovnat
Přidat do sledovaných položek
4000 pcs.
Black (BK) PC5X3-PA66HIRHSUV-BK 133-03188
SamplesPack_Photovoltaic-DIV
Porovnat
SamplesPack_Photovoltaic-DIV
SamplesPack_Photovoltaic-DIV 905-50078
Porovnat
Přidat do sledovaných položek
1 pack
SamplesPack_Photovoltaic-DIV 905-50078
Samples_Railway-DIV-MIX
Porovnat
Samples_Railway-DIV-MIX
Samples_Railway-DIV-MIX 905-50080
Porovnat
Přidat do sledovaných položek
1 pack
Various (MIX) Samples_Railway-DIV-MIX 905-50080
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 280pcs.
RCA180SM10.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 280pcs.
RCB180SM10-PA66HIRHSUV/ST/ZN-BK 151-01390
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB180SM10-PA66HIRHSUV/ST/ZN-BK 151-01390
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 15°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 15°, black, 280pcs.
RCB15SM10-PA66HIRHSUV/ST/ZN-BK 151-01449
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB15SM10-PA66HIRHSUV/ST/ZN-BK 151-01449
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 15°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 15°, black, 280pcs.
RCB15SM12-PA66HIRHSUV/ST/ZN-BK 151-01450
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB15SM12-PA66HIRHSUV/ST/ZN-BK 151-01450
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 15°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 15°, black, 280pcs.
RCB15SM6-PA66HIRHSUV/ST/ZN-BK 151-01648
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB15SM6-PA66HIRHSUV/ST/ZN-BK 151-01648
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 15°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 15°, black, 280pcs.
RCB15SM8-PA66HIRHSUV/ST/ZN-BK 151-01448
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB15SM8-PA66HIRHSUV/ST/ZN-BK 151-01448
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Porovnat
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 200pcs.
RCB180LM10-PA66HIRHSUV/ST/ZN-BK 151-01446
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB180LM10-PA66HIRHSUV/ST/ZN-BK 151-01446
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Porovnat
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 180°, black, 200pcs.
RCB180LM12-PA66HIRHSUV/ST/ZN-BK 151-01447
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB180LM12-PA66HIRHSUV/ST/ZN-BK 151-01447
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Porovnat
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 200pcs.
RCB180LM6-PA66HIRHSUV/ST/ZN-BK 151-01647
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB180LM6-PA66HIRHSUV/ST/ZN-BK 151-01647
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Porovnat
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 200pcs.
RCB180LM8-PA66HIRHSUV/ST/ZN-BK 151-01445
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB180LM8-PA66HIRHSUV/ST/ZN-BK 151-01445
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 200pcs.
Porovnat
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 200pcs.
RCB180MM10-PA66HIRHSUV/ST/ZN-BK 151-01443
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB180MM10-PA66HIRHSUV/ST/ZN-BK 151-01443
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 180°, black, 200pcs.
Porovnat
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 180°, black, 200pcs.
RCB180MM12-PA66HIRHSUV/ST/ZN-BK 151-01444
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB180MM12-PA66HIRHSUV/ST/ZN-BK 151-01444
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 200pcs.
Porovnat
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 200pcs.
RCB180MM6-PA66HIRHSUV/ST/ZN-BK 151-01646
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB180MM6-PA66HIRHSUV/ST/ZN-BK 151-01646
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 200pcs.
Porovnat
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 200pcs.
RCB180MM8-PA66HIRHSUV/ST/ZN-BK 151-01442
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB180MM8-PA66HIRHSUV/ST/ZN-BK 151-01442
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 180°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 180°, black, 280pcs.
RCB180SM12-PA66HIRHSUV/ST/ZN-BK 151-01441
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB180SM12-PA66HIRHSUV/ST/ZN-BK 151-01441
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 280pcs.
RCB180SM6-PA66HIRHSUV/ST/ZN-BK 151-01645
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB180SM6-PA66HIRHSUV/ST/ZN-BK 151-01645
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 5pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 5pcs.
RCB180SM6-PA66HIRHSUV/ST/ZN-BK 151-01671
Porovnat
Přidat do sledovaných položek
5 pcs.
Black (BK) RCB180SM6-PA66HIRHSUV/ST/ZN-BK 151-01671
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 30°, black, 200pcs.
Porovnat
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 30°, black, 200pcs.
RCB30LM10-PA66HIRHSUV/ST/ZN-BK 151-01455
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB30LM10-PA66HIRHSUV/ST/ZN-BK 151-01455
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 30°, black, 200pcs.
Porovnat
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 30°, black, 200pcs.
RCB30LM12-PA66HIRHSUV/ST/ZN-BK 151-01456
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB30LM12-PA66HIRHSUV/ST/ZN-BK 151-01456
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 30°, black, 200pcs.
Porovnat
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 30°, black, 200pcs.
RCB30LM6-PA66HIRHSUV/ST/ZN-BK 151-01650
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB30LM6-PA66HIRHSUV/ST/ZN-BK 151-01650
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 30°, black, 200pcs.
Porovnat
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 30°, black, 200pcs.
RCB30LM8-PA66HIRHSUV/ST/ZN-BK 151-01454
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB30LM8-PA66HIRHSUV/ST/ZN-BK 151-01454
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 30°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 30°, black, 280pcs.
RCB30SM10-PA66HIRHSUV/ST/ZN-BK 151-01452
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB30SM10-PA66HIRHSUV/ST/ZN-BK 151-01452
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 30°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 30°, black, 280pcs.
RCB30SM12-PA66HIRHSUV/ST/ZN-BK 151-01453
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB30SM12-PA66HIRHSUV/ST/ZN-BK 151-01453
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 30°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 30°, black, 280pcs.
RCB30SM6-PA66HIRHSUV/ST/ZN-BK 151-01649
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB30SM6-PA66HIRHSUV/ST/ZN-BK 151-01649
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 30°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 30°, black, 280pcs.
RCB30SM8-PA66HIRHSUV/ST/ZN-BK 151-01451
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB30SM8-PA66HIRHSUV/ST/ZN-BK 151-01451
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 90°, black, 200pcs.
Porovnat
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 90°, black, 200pcs.
RCB90LM10-PA66HIRHSUV/ST/ZN-BK 151-01461
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB90LM10-PA66HIRHSUV/ST/ZN-BK 151-01461
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 90°, black, 200pcs.
Porovnat
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 90°, black, 200pcs.
RCB90LM12-PA66HIRHSUV/ST/ZN-BK 151-01462
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB90LM12-PA66HIRHSUV/ST/ZN-BK 151-01462
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 90°, black, 200pcs.
Porovnat
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 90°, black, 200pcs.
RCB90LM6-PA66HIRHSUV/ST/ZN-BK 151-01652
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB90LM6-PA66HIRHSUV/ST/ZN-BK 151-01652
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 90°, black, 200pcs.
Porovnat
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 90°, black, 200pcs.
RCB90LM8-PA66HIRHSUV/ST/ZN-BK 151-01460
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB90LM8-PA66HIRHSUV/ST/ZN-BK 151-01460
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 90°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 90°, black, 280pcs.
RCB90SM10-PA66HIRHSUV/ST/ZN-BK 151-01458
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB90SM10-PA66HIRHSUV/ST/ZN-BK 151-01458
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 90°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 90°, black, 280pcs.
RCB90SM12-PA66HIRHSUV/ST/ZN-BK 151-01459
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB90SM12-PA66HIRHSUV/ST/ZN-BK 151-01459
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 90°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 90°, black, 280pcs.
RCB90SM6-PA66HIRHSUV/ST/ZN-BK 151-01651
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB90SM6-PA66HIRHSUV/ST/ZN-BK 151-01651
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 15°, black, 300pcs.
Ratchet P-Clamp 15 Degree Angle
Porovnat
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 15°, black, 300pcs.
RCA15SM10-PA66HIRHSUV/ST/ZN-BK 151-01426
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) RCA15SM10-PA66HIRHSUV/ST/ZN-BK 151-01426
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 15°, black, 300pcs.
Ratchet P-Clamp 15 Degree Angle
Porovnat
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 15°, black, 300pcs.
RCA15SM12-PA66HIRHSUV/ST/ZN-BK 151-01427
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) RCA15SM12-PA66HIRHSUV/ST/ZN-BK 151-01427
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 15°, black, 300pcs.
Ratchet P-Clamp 15 Degree Angle
Porovnat
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 15°, black, 300pcs.
RCA15SM6-PA66HIRHSUV/ST/ZN-BK 151-01640
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) RCA15SM6-PA66HIRHSUV/ST/ZN-BK 151-01640
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 15°, black, 300pcs.
Ratchet P-Clamp 15 Degree Angle
Porovnat
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 15°, black, 300pcs.
RCA15SM8-PA66HIRHSUV/ST/ZN-BK 151-01425
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) RCA15SM8-PA66HIRHSUV/ST/ZN-BK 151-01425
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Porovnat
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 180°, black, 200pcs.
RCA180LM10-PA66HIRHSUV/ST/ZN-BK 151-01423
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCA180LM10-PA66HIRHSUV/ST/ZN-BK 151-01423
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Porovnat
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 180°, black, 200pcs.
RCA180LM12-PA66HIRHSUV/ST/ZN-BK 151-01424
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCA180LM12-PA66HIRHSUV/ST/ZN-BK 151-01424
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Porovnat
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 200pcs.
RCA180LM6-PA66HIRHSUV/ST/ZN-BK 151-01639
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCA180LM6-PA66HIRHSUV/ST/ZN-BK 151-01639
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Porovnat
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 200pcs.
RCA180LM8-PA66HIRHSUV/ST/ZN-BK 151-01422
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCA180LM8-PA66HIRHSUV/ST/ZN-BK 151-01422
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Porovnat
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 180°, black, 200pcs.
RCA180MM10-PA66HIRHSUV/ST/ZN-BK 151-01420
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCA180MM10-PA66HIRHSUV/ST/ZN-BK 151-01420
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Porovnat
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 180°, black, 200pcs.
RCA180MM12-PA66HIRHSUV/ST/ZN-BK 151-01421
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCA180MM12-PA66HIRHSUV/ST/ZN-BK 151-01421
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Porovnat
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 200pcs.
RCA180MM6-PA66HIRHSUV/ST/ZN-BK 151-01638
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCA180MM6-PA66HIRHSUV/ST/ZN-BK 151-01638
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Porovnat
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 200pcs.
RCA180MM8-PA66HIRHSUV/ST/ZN-BK 151-01419
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCA180MM8-PA66HIRHSUV/ST/ZN-BK 151-01419
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 180°, black, 300pcs.
RCA180SM10.
Porovnat
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 180°, black, 300pcs.
RCA180SM10-PA66HIRHSUV/ST/ZN-BK 151-01417
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) RCA180SM10-PA66HIRHSUV/ST/ZN-BK 151-01417
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 180°, black, 300pcs.
Porovnat
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 180°, black, 300pcs.
RCA180SM12-PA66HIRHSUV/ST/ZN-BK 151-01418
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) RCA180SM12-PA66HIRHSUV/ST/ZN-BK 151-01418
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 300pcs.
Porovnat
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 300pcs.
RCA180SM6-PA66HIRHSUV/ST/ZN-BK 151-01637
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) RCA180SM6-PA66HIRHSUV/ST/ZN-BK 151-01637
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Výsledky pro "RA-, RB- and SAC-Series clips" v Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Facebook  Instagram  Twitter  YouTube  LinkedIn  Corporate Blog 
Kontakt VOP Impressum Mapa stránek Newsletter Pokyny a závazky Zásady ochrany osobních údajů
Aktualizace: 17/08/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.284) | Aktualizace: 17/08/2025 | Nastavení ochrany osobních údajů
Hledat prodejce Kontakt