18/08/2026

Výsledky pro "screw mount cable holder" v Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

113 produkty
Resetovat vše
Cable tie mount with pipe/tube holder, Wmax=8.8mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.
New innovative QwicGrip for fastening to e.g. solar rails with cable ties.
Porovnat
QGDHC5.2-8.0M-PA11-BK 151-04089
Porovnat
Přidat do sledovaných položek
New innovative QwicGrip for fastening to e.g. solar rails with cable ties.
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) QGDHC5.2-8.0M-PA11-BK 151-04089
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.
Cable tie mount with pipe/tube holder, Wmax=8.8mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
New innovative QwicGrip for fastening to e.g. solar rails with cable ties.
Porovnat
QGDHC5.2-8.0M-PA66W-BK 151-04088
Porovnat
Přidat do sledovaných položek
New innovative QwicGrip for fastening to e.g. solar rails with cable ties.
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) QGDHC5.2-8.0M-PA66W-BK 151-04088
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Bundling clip with pipe/tube holder, L=60.4mm, SO=15.0mm, black, 500pcs.
Porovnat
OCTC1-PA66HIRHS-BK 151-00447
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) OCTC1-PA66HIRHS-BK 151-00447
Cable clip for adhesive use/with pipe/tube holder, Dmax=5.0mm
RB5 self-adhesive clip for a quick and easy installation.
Porovnat
RB5-PA66-BK 151-14000
Porovnat
Přidat do sledovaných položek
RB5 self-adhesive clip for a quick and easy installation.
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) RB5-PA66-BK 151-14000
Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm
SolidTack Clip RB8APT with special adhesive.
Porovnat
RB8APT-PA66-BK 151-00497
Porovnat
Přidat do sledovaných položek
SolidTack Clip RB8APT with special adhesive.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) RB8APT-PA66-BK 151-00497
Cable clip for adhesive use/with pipe/tube holder, Dmax=20.0mm
RB20 self-adhesive clip for a quick and easy installation.
Porovnat
RB20-PA66HIRHS-BK 151-00831
Porovnat
Přidat do sledovaných položek
RB20 self-adhesive clip for a quick and easy installation.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) RB20-PA66HIRHS-BK 151-00831
Cable clip for adhesive use/with pipe/tube holder, Dmax=5.0mm
RB5 self-adhesive clip for a quick and easy installation.
Porovnat
RB5-PA66-NA 151-14059
Porovnat
Přidat do sledovaných položek
RB5 self-adhesive clip for a quick and easy installation.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) RB5-PA66-NA 151-14059
Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm
Two RB8 adhesive cable clamps shown.
Porovnat
RB8-PA66-NA 151-14089
Porovnat
Přidat do sledovaných položek
Two RB8 adhesive cable clamps shown.
Porovnat
Porovnat
Přidat do sledovaných položek
5000 pcs.
Natural (NA) RB8-PA66-NA 151-14089
Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm
Two RB8 adhesive cable clamps shown.
Porovnat
RB8-PA66-NA 151-13606
Porovnat
Přidat do sledovaných položek
Two RB8 adhesive cable clamps shown.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) RB8-PA66-NA 151-13606
Cable clip for adhesive use/with pipe/tube holder, Dmin=14.0mm, Dmax=14.0mm
RB14 self-adhesive clip for a quick and easy installation.
Porovnat
RB14-PA66-BK 151-00502
Porovnat
Přidat do sledovaných položek
RB14 self-adhesive clip for a quick and easy installation.
Porovnat
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RB14-PA66-BK 151-00502
Cable clip for adhesive use/with pipe/tube holder, Dmax=14.0mm
RB14 self-adhesive clip for a quick and easy installation.
Porovnat
RB14-PA66-NA 151-00505
Porovnat
Přidat do sledovaných položek
RB14 self-adhesive clip for a quick and easy installation.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) RB14-PA66-NA 151-00505
Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm
Simple snap in design allows for quick and easy installation or removal of cables.
Porovnat
RB8-PA66-BK 151-13601
Porovnat
Přidat do sledovaných položek
Simple snap in design allows for quick and easy installation or removal of cables.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) RB8-PA66-BK 151-13601
P-clamp closed, Dmin=3.0mm, Dmax=3.6mm, ⌀4.3 mm, natural, 100pcs.
P-Clip, NX-Series.
Porovnat
NX0-PA66-NA 211-00242
Porovnat
Přidat do sledovaných položek
P-Clip, NX-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) NX0-PA66-NA 211-00242
P-clamp closed, Dmin=3.0mm, Dmax=3.6mm, ⌀4.3 mm, black, 100pcs.
P-Clip, NX-Series.
Porovnat
NX0-PA66-BK 211-00254
Porovnat
Přidat do sledovaných položek
P-Clip, NX-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) NX0-PA66-BK 211-00254
P-clamp closed, Dmin=4.5mm, Dmax=5.1mm, ⌀4.9 mm, natural, 100pcs.
P-Clip, NX-Series.
Porovnat
NX1-PA66-NA 211-00237
Porovnat
Přidat do sledovaných položek
P-Clip, NX-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) NX1-PA66-NA 211-00237
P-clamp closed, Dmin=4.5mm, Dmax=5.1mm, ⌀4.9 mm, black, 100pcs.
P-Clip, NX-Series.
Porovnat
NX1-PA66-BK 211-00246
Porovnat
Přidat do sledovaných položek
P-Clip, NX-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) NX1-PA66-BK 211-00246
P-clamp closed, Dmin=8.2mm, Dmax=8.8mm, ⌀4.3 mm, black, 100pcs.
P-Clip, NX-Series.
Porovnat
NX3-PA66-BK 211-00248
Porovnat
Přidat do sledovaných položek
P-Clip, NX-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) NX3-PA66-BK 211-00248
P-clamp closed, Dmin=9.2mm, Dmax=9.8mm, ⌀5.0 mm, natural, 100pcs.
P-Clip, NX-Series.
Porovnat
NX4-PA66-NA 211-00235
Porovnat
Přidat do sledovaných položek
P-Clip, NX-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) NX4-PA66-NA 211-00235
P-clamp closed, Dmin=9.2mm, Dmax=9.8mm, ⌀5.0 mm, black, 100pcs.
P-Clip, NX-Series.
Porovnat
NX4-PA66-BK 211-00249
Porovnat
Přidat do sledovaných položek
P-Clip, NX-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) NX4-PA66-BK 211-00249
P-clamp closed, Dmin=14.2mm, Dmax=14.8mm, ⌀5.0 mm, natural, 100pcs.
P-Clip, NX-Series.
Porovnat
NX6-PA66-NA 211-00236
Porovnat
Přidat do sledovaných položek
P-Clip, NX-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) NX6-PA66-NA 211-00236
P-clamp closed, Dmin=14.2mm, Dmax=14.8mm, ⌀5.0 mm, black, 100pcs.
P-Clip, NX-Series.
Porovnat
NX6-PA66-BK 211-00256
Porovnat
Přidat do sledovaných položek
P-Clip, NX-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) NX6-PA66-BK 211-00256
P-clamp closed, Dmin=6.2mm, Dmax=6.8mm, ⌀5.0 mm, natural, 100pcs.
P-Clip NXR-Series.
Porovnat
NX1A-PA66-NA 211-00238
Porovnat
Přidat do sledovaných položek
P-Clip NXR-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) NX1A-PA66-NA 211-00238
P-clamp closed, Dmin=6.2mm, Dmax=6.8mm, ⌀5.0 mm, black, 100pcs.
P-Clip NXR-Series.
Porovnat
NX1A-PA66-BK 211-00247
Porovnat
Přidat do sledovaných položek
P-Clip NXR-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) NX1A-PA66-BK 211-00247
P-clamp closed, Dmin=12.7mm, Dmax=15.9mm, ⌀4.0 mm, natural, 100pcs.
P-Clip NXR-Series.
Porovnat
NXR8-PA66-NA 211-00239
Porovnat
Přidat do sledovaných položek
P-Clip NXR-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) NXR8-PA66-NA 211-00239
P-clamp closed, Dmin=12.7mm, Dmax=15.9mm, ⌀4.0 mm, black, 100pcs.
P-Clip NXR-Series.
Porovnat
NXR8-PA66-BK 211-00250
Porovnat
Přidat do sledovaných položek
P-Clip NXR-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) NXR8-PA66-BK 211-00250
P-clamp closed, Dmin=15.9mm, Dmax=20.6mm, ⌀4.0 mm, natural, 100pcs.
P-Clip NXR-Series.
Porovnat
NXR11-PA66-NA 211-00240
Porovnat
Přidat do sledovaných položek
P-Clip NXR-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) NXR11-PA66-NA 211-00240
P-clamp closed, Dmin=15.9mm, Dmax=20.6mm, ⌀4.0 mm, black, 100pcs.
P-Clip NXR-Series.
Porovnat
NXR11-PA66-BK 211-00251
Porovnat
Přidat do sledovaných položek
P-Clip NXR-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) NXR11-PA66-BK 211-00251
P-clamp closed, Dmin=20.6mm, Dmax=25.4mm, ⌀4.0 mm, natural, 100pcs.
P-Clip NXR-Series.
Porovnat
NXR14-PA66-NA 211-00241
Porovnat
Přidat do sledovaných položek
P-Clip NXR-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) NXR14-PA66-NA 211-00241
P-clamp closed, Dmin=20.6mm, Dmax=25.4mm, ⌀4.0 mm, black, 100pcs.
P-Clip NXR-Series.
Porovnat
NXR14-PA66-BK 211-00252
Porovnat
Přidat do sledovaných položek
P-Clip NXR-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) NXR14-PA66-BK 211-00252
P-clamp closed, Dmin=20.6mm, Dmax=25.4mm, ⌀4.0 mm, black, 100pcs.
P-Clip NXR-Series.
Porovnat
NXR14-PA66W-BK 211-00255
Porovnat
Přidat do sledovaných položek
P-Clip NXR-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) NXR14-PA66W-BK 211-00255
P-clamp closed, Dmin=27.0mm, Dmax=31.8mm, ⌀4.5 mm, natural, 100pcs.
P-Clip NXR-Series.
Porovnat
NXR16-PA66-NA 211-00243
Porovnat
Přidat do sledovaných položek
P-Clip NXR-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) NXR16-PA66-NA 211-00243
P-clamp closed, Dmin=27.0mm, Dmax=31.8mm, ⌀4.5 mm, black, 100pcs.
P-Clip NXR-Series.
Porovnat
NXR16-PA66-BK 211-00253
Porovnat
Přidat do sledovaných položek
P-Clip NXR-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) NXR16-PA66-BK 211-00253
P-clamp closed, Dmin=33.3mm, Dmax=38.1mm, ⌀5.7 mm, natural, 100pcs.
P-Clip NXR-Series.
Porovnat
NXR18-PA66-NA 211-00244
Porovnat
Přidat do sledovaných položek
P-Clip NXR-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) NXR18-PA66-NA 211-00244
Cable clip for screw fixation/with pipe/tube holder, ⌀M8, Dmax=29.0mm
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Screwed Ratchet Clamp SRC150M8 for parallel bundling of cables and tubes.
Porovnat
SRC150M8-PA6GF30-BK 156-02742
Porovnat
Přidat do sledovaných položek
Screwed Ratchet Clamp SRC150M8 for parallel bundling of cables and tubes.
Porovnat
Porovnat
Přidat do sledovaných položek
150
Black (BK) SRC150M8-PA6GF30-BK 156-02742
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmin=8.2mm, Dmax=8.8mm, ⌀4.3 mm, natural, 100pcs.
P-Clip, NX-Series.
Porovnat
NX3-PA66-NA 211-00234
Porovnat
Přidat do sledovaných položek
P-Clip, NX-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) NX3-PA66-NA 211-00234
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Designed with radiused edges to prevent chafing and cutting into insulation.
Porovnat
H7P-PA66HS-BK 211-60006
Porovnat
Přidat do sledovaných položek
Designed with radiused edges to prevent chafing and cutting into insulation.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) H7P-PA66HS-BK 211-60006
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 160pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
RCC180SM8-PA66HIRHSUV/ST/ZN-BK 151-01474
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCC180SM8-PA66HIRHSUV/ST/ZN-BK 151-01474
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, ⌀1.5-35mm, black, 500pcs.
Porovnat
HT160SB6HE-PA66-BK 157-00094
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) HT160SB6HE-PA66-BK 157-00094
Cable clip for adhesive use/with pipe/tube holder, Dmin=12.70mm, Dmax=19.56mm
The self adhesive mount of Ratchet -P-Clamp series creates an incredible bond with mounting surface.
Porovnat
IRCBMB5A-PA66HIRHSUV-BK 156-02723
Porovnat
Přidat do sledovaných položek
The self adhesive mount of Ratchet -P-Clamp series creates an incredible bond with mounting surface.
Porovnat
Porovnat
Přidat do sledovaných položek
25
Black (BK) IRCBMB5A-PA66HIRHSUV-BK 156-02723
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
Porovnat
T50SOSSBD-M5-PA66HSUV-BK 157-00044
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T50SOSSBD-M5-PA66HSUV-BK 157-00044
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
T50SOSSBD-M10
Porovnat
T50SOSSBU-M5-PA66HSUV-GY 157-00064
Porovnat
Přidat do sledovaných položek
T50SOSSBD-M10
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Grey (GY) T50SOSSBU-M5-PA66HSUV-GY 157-00064
Fixing tie for stud, ⌀5.0-60.0mm, black, 25pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
SBT120-M6-PA66HSUV-BK 157-00022
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
25 pcs.
Black (BK) SBT120-M6-PA66HSUV-BK 157-00022
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, ⌀5.0-35.0mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
SBT50-M12-PA66HSUV-BK 157-00025
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) SBT50-M12-PA66HSUV-BK 157-00025
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, ⌀5.0-35.0mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
SBT50-M8-PA66HSUV-BK 157-00027
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) SBT50-M8-PA66HSUV-BK 157-00027
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, ⌀1-35.0mm, black, 500pcs.
1-piece fixing ties for weld studs 6mm
Porovnat
T50SOSSBS6E-PA66HS-BK 157-00211
Porovnat
Přidat do sledovaných položek
1-piece fixing ties for weld studs 6mm
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SOSSBS6E-PA66HS-BK 157-00211
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, natural, 1000pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Porovnat
H7P-PA66-NA 211-60079
Porovnat
Přidat do sledovaných položek
P-Clamps H1P - H18P in different dimensions.
Porovnat
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) H7P-PA66-NA 211-60079
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for adhesive use/with pipe/tube holder, Dmin=12.70mm, Dmax=19.56mm
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
The self adhesive mount of Ratchet -P-Clamp series creates an incredible bond with mounting surface.
Porovnat
IRCBMB5A-PA66HIRHSUV-BK 156-02634
Porovnat
Přidat do sledovaných položek
The self adhesive mount of Ratchet -P-Clamp series creates an incredible bond with mounting surface.
Porovnat
Porovnat
Přidat do sledovaných položek
250 pcs.
Black (BK) IRCBMB5A-PA66HIRHSUV-BK 156-02634
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 15°, black, 280pcs.
Porovnat
RCB15SM10-PA66HIRHSUV/ST/ZN-BK 151-01449
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB15SM10-PA66HIRHSUV/ST/ZN-BK 151-01449
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 90°, black, 200pcs.
Porovnat
RCA90LM10-PA66HIRHSUV/ST/ZN-BK 151-01438
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCA90LM10-PA66HIRHSUV/ST/ZN-BK 151-01438
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 90°, black, 200pcs.
Porovnat
RCA90LM12-PA66HIRHSUV/ST/ZN-BK 151-01439
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCA90LM12-PA66HIRHSUV/ST/ZN-BK 151-01439
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 90°, black, 300pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
RCA90SM10-PA66HIRHSUV/ST/ZN-BK 151-01435
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) RCA90SM10-PA66HIRHSUV/ST/ZN-BK 151-01435
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 90°, black, 300pcs.
Porovnat
RCA90SM12-PA66HIRHSUV/ST/ZN-BK 151-01436
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) RCA90SM12-PA66HIRHSUV/ST/ZN-BK 151-01436
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 90°, black, 300pcs.
Porovnat
RCA90SM8-PA66HIRHSUV/ST/ZN-BK 151-01434
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) RCA90SM8-PA66HIRHSUV/ST/ZN-BK 151-01434
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 15°, black, 280pcs.
Porovnat
RCB15SM12-PA66HIRHSUV/ST/ZN-BK 151-01450
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB15SM12-PA66HIRHSUV/ST/ZN-BK 151-01450
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 15°, black, 280pcs.
Porovnat
RCB15SM6-PA66HIRHSUV/ST/ZN-BK 151-01648
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB15SM6-PA66HIRHSUV/ST/ZN-BK 151-01648
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 15°, black, 280pcs.
Porovnat
RCB15SM8-PA66HIRHSUV/ST/ZN-BK 151-01448
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB15SM8-PA66HIRHSUV/ST/ZN-BK 151-01448
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 90°, black, 200pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
RCA90LM6-PA66HIRHSUV/ST/ZN-BK 151-01644
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCA90LM6-PA66HIRHSUV/ST/ZN-BK 151-01644
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 90°, black, 200pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
RCA90LM8-PA66HIRHSUV/ST/ZN-BK 151-01437
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCA90LM8-PA66HIRHSUV/ST/ZN-BK 151-01437
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 90°, black, 300pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
RCA90SM6-PA66HIRHSUV/ST/ZN-BK 151-01643
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) RCA90SM6-PA66HIRHSUV/ST/ZN-BK 151-01643
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, ⌀5.0-60.0mm, black, 25pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
SBT120-M12-PA66HSUV-BK 157-00021
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
25 pcs.
Black (BK) SBT120-M12-PA66HSUV-BK 157-00021
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
Porovnat
T50SOSSBD-M6-PA66HSUV-BK 157-00038
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T50SOSSBD-M6-PA66HSUV-BK 157-00038
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
Porovnat
T50SOSSBD-M10-PA66HSW-BK 157-00040
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T50SOSSBD-M10-PA66HSW-BK 157-00040
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
Porovnat
T50SOSSBU-M6-PA66HSUV-GY 157-00065
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Grey (GY) T50SOSSBU-M6-PA66HSUV-GY 157-00065
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
T50SOSSBU-M8/10 for bundles which run below the stud.
Porovnat
T50SOSSBU-M10-PA66HSW-GY 157-00067
Porovnat
Přidat do sledovaných položek
T50SOSSBU-M8/10 for bundles which run below the stud.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Grey (GY) T50SOSSBU-M10-PA66HSW-GY 157-00067
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
ALU11-AL-NA 211-10110
Porovnat
Přidat do sledovaných položek
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
ALU12-AL-NA 211-10120
Porovnat
Přidat do sledovaných položek
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU12-AL-NA 211-10120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
ALU13-AL-NA 211-10130
Porovnat
Přidat do sledovaných položek
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU13-AL-NA 211-10130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU17C-AL/CR-BK 211-15170
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU19C-AL/CR-BK 211-15190
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
ALU23C P-Clamp with chloroprene insert.
Porovnat
ALU23C-AL/CR-BK 211-15230
Porovnat
Přidat do sledovaných položek
ALU23C P-Clamp with chloroprene insert.
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU25C-AL/CR-BK 211-15250
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU26C-AL/CR-BK 211-15260
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU28C-AL/CR-BK 211-15280
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU29C-AL/CR-BK 211-15290
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU30C-AL/CR-BK 211-15300
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
ALU8-AL-NA 211-10080
Porovnat
Přidat do sledovaných položek
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
Porovnat
T50SOSSBD-M8-PA66HSW-BK 157-00039
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T50SOSSBD-M8-PA66HSW-BK 157-00039
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
Porovnat
T50SOSSBU-M8-PA66HSW-GY 157-00066
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Grey (GY) T50SOSSBU-M8-PA66HSW-GY 157-00066
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
ALU10-AL-NA 211-10100
Porovnat
Přidat do sledovaných položek
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU11C-AL/CR-BK 211-15110
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU13C-AL/CR-BK 211-15130
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU14C-AL/CR-BK 211-15140
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU16C-AL/CR-BK 211-15160
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU18C-AL/CR-BK 211-15180
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU20C-AL/CR-BK 211-15200
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU22C-AL/CR-BK 211-15220
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU24C-AL/CR-BK 211-15240
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
ALU4-AL-NA 211-10040
Porovnat
Přidat do sledovaných položek
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU4C-AL/CR-BK 211-15040
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
ALU5-AL-NA 211-10050
Porovnat
Přidat do sledovaných položek
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU5C-AL/CR-BK 211-15050
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
ALU7-AL-NA 211-10070
Porovnat
Přidat do sledovaných položek
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
ALU6-AL-NA 211-10060
Porovnat
Přidat do sledovaných položek
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, inside serrated, ⌀9.0-40.0mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Flexible head wraps around cable bundle for easy installation.
Porovnat
RT50RS5-PA66-BK 115-07110
Porovnat
Přidat do sledovaných položek
Flexible head wraps around cable bundle for easy installation.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) RT50RS5-PA66-BK 115-07110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU12C-AL/CR-BK 211-15120
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU12C-AL/CR-BK 211-15120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU15C-AL/CR-BK 211-15150
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU15C-AL/CR-BK 211-15150
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU6C-AL/CR-BK 211-15060
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU6C-AL/CR-BK 211-15060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU7C-AL/CR-BK 211-15070
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU7C-AL/CR-BK 211-15070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU8C-AL/CR-BK 211-15080
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU8C-AL/CR-BK 211-15080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU9C-AL/CR-BK 211-15090
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU9C-AL/CR-BK 211-15090
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Výsledky pro "screw mount cable holder" v Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Vázací pásky a příchytky Vázací pásky a příchytky

Stahovací pásky a příchytky

Stahovací pásky musí být v dnešní době schopny vyhovět nejrůznějším požadavkům, protože se používají v nejširším spektru činností - od jednoduchého svazování kabelů stahovacími pásky až po naprosto specifické použití vázacích pásků v extrémních podmínkách.

Stahovací pásky

Kabelové příchytky na hranu: uchyťte kabely bez vrtání

Výrobek EdgeClip představuje řešení pro upevnění kabelů, které umožňuje flexibilní vedení vodičů, kabelových svazků, kanálů a trubek v mnoha různých průmyslových aplikacích, včetně automobilového průmyslu.

Kabelové příchytky na hranu
Kabelové příchytky Kabelové příchytky

Kabelové příchytky pro průmyslové aplikace

Od samolepicích kabelových příchytek až po příchytky pro souběžné vedení nebo správu médií: Prohlédněte si portfolio našich výrobků zde.

Kabelové příchytky
  Czech Republic

Sociální média

© HellermannTyton 2026 (v4.312.3)  |  Aktualizace: 16/08/2026  |  Nastavení ochrany osobních údajů
Hledat prodejce Kontakt