Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
10/07/2025

Výsledky pro "igh temperature heat shrink tubing"

Nalezeno 6 045 výrobků 1 další položka
Poznámka:  Kombinace hledaných výrazů nevrátila žádné odpovídající výsledky.  Níže jsou výsledky, které odpovídají dílům dle Vašeho vyhledávání.

Typ: Zkuste změnit nebo odstranit výrazy, abyste zlepšili relevanci výsledků vyhledávání.

K dispozici jsou výsledky v následujících kategoriích:
Cable Ties and Fixings

Cable Ties and Fixings  (1693)

Cable Ties Inside Serrated  (160) Cable Ties Outside Serrated  (57) Cable Ties Without Serration  (34) Cable Ties, Releasable  (29) Cable Ties, Stainless Steel  (81) Cable Ties With Fixing Elements  (627) Cable Tie Mounts  (74) Fixing Elements  (234) Clips, Clamps and Plugs  (650)
Cable Ties and Fixings
Cable Ties and Fixings (1693)
Insulation

Insulation  (1369)

Heat Shrink Tubing  (962) Heat Shrinkable Moulded Shapes  (343) Insulating tubes  (73)
Insulation
Insulation (1369)
Cable Protection Systems

Cable Protection Systems  (1272)

Non-Metallic Conduit Systems  (502) Metallic Conduit Systems  (265) Spiral-Reinforced Conduit Systems  (112) Conduit System Accessories  (211) Protective Tubing and Spiral Binding  (158) Expandable Braided Sleeves  (20) Open Woven Sleeves  (19) Burst Protective Sleeves  (1) Electromagnetic Shielding Sleeves  (1) Edge Protection  (8) Grommets  (1) Wiring Ducts and Accessories  (9)
Cable Protection Systems
Cable Protection Systems (1272)
Electrical Installation

Electrical Installation  (148)

Wire Connectors  (3) Downlight Covers  (8) Cable Rods  (1) Electrical Tapes  (22) Cast Resin Technology  (28) Gel Technology  (16) Chemicals  (3) Industrial Silicones  (67)
Electrical Installation
Electrical Installation (148)
Identification Systems

Identification Systems  (1218)

Wire and Cable Markers  (1114) Control Panel Labelling  (112) Industrial Identification  (82) RFID tags and cable ties  (7) Hazardous Area Identification  (8) Printers and Software  (35)
Identification Systems
Identification Systems (1218)
Application Tooling

Application Tooling  (37)

Automatic Cable Tying System  (11) Application Tooling for Heat Shrinkable Tubing  (5) Application Tooling for Non Shrinkable Tubing  (16) Application Tooling for Braided Sleeves  (3) Application Tooling for Identification  (2)
Application Tooling
Application Tooling (37)
Connectivity

Connectivity  (326)

RapidNet  (3) Fibre  (1) UFC Closures  (37) FDN Closures  (35) FML Closures  (8) FRBU Closures  (23) FST Closures  (5) Connectorised Closures  (6) Enclosures  (35) Cablelok  (86) Splice Trays  (47) Broadband Accessories  (128)
Connectivity
Connectivity (326)
6 045 produkty
???product.list.title???
Resetovat vše
Cable label, self laminating, white/transparent, thermal transfer print, 19.05x48.20mm, H2=79.20mm, 1000pcs.
Easy marking of flexible, semi-rigid and rigid cables and wires.
Porovnat
Cable label, self laminating, white/transparent, thermal transfer print, 19.05x48.20mm, H2=79.20mm, 1000pcs.
TAG1TD2-323-CL/WH 596-01320
Porovnat
Přidat do sledovaných položek
1000 pcs.
White (WH), Transparent (CL) TAG1TD2-323-CL/WH 596-01320
Cable label, self laminating, white/transparent, thermal transfer print, 12.70x25.40mm, H2=36.50mm, 2500pcs.
Easy marking of flexible, semi-rigid and rigid cables and wires.
Porovnat
Cable label, self laminating, white/transparent, thermal transfer print, 12.70x25.40mm, H2=36.50mm, 2500pcs.
TAG22TD3-323-CL/WH 596-22320
Porovnat
Přidat do sledovaných položek
2500 pcs.
White (WH), Transparent (CL) TAG22TD3-323-CL/WH 596-22320
Cable label, self laminating, white/transparent, thermal transfer print, 12.70x19.05mm, H2=44.50mm, 5000pcs.
Easy marking of flexible, semi-rigid and rigid cables and wires.
Porovnat
Cable label, self laminating, white/transparent, thermal transfer print, 12.70x19.05mm, H2=44.50mm, 5000pcs.
TAG23TD5-323-CL/WH 596-23320
Porovnat
Přidat do sledovaných položek
5000 pcs.
White (WH), Transparent (CL) TAG23TD5-323-CL/WH 596-23320
Cable label, self laminating, white/transparent, thermal transfer print, 12.70x50.80mm, H2=36.50mm, 1000pcs.
Easy marking of flexible, semi-rigid and rigid cables and wires.
Porovnat
Cable label, self laminating, white/transparent, thermal transfer print, 12.70x50.80mm, H2=36.50mm, 1000pcs.
TAG24TD1-323-CL/WH 596-24320
Porovnat
Přidat do sledovaných položek
1000 pcs.
White (WH), Transparent (CL) TAG24TD1-323-CL/WH 596-24320
Cable label, self laminating, white/transparent, thermal transfer print, 12.70x25.40mm, H2=44.50mm, 2500pcs.
Easy marking of flexible, semi-rigid and rigid cables and wires.
Porovnat
Cable label, self laminating, white/transparent, thermal transfer print, 12.70x25.40mm, H2=44.50mm, 2500pcs.
TAG25TD3-323-CL/WH 596-25320
Porovnat
Přidat do sledovaných položek
2500 pcs.
White (WH), Transparent (CL) TAG25TD3-323-CL/WH 596-25320
Cable label, self laminating, white/transparent, thermal transfer print, 12.70x12.70mm, H2=36.50mm, 5000pcs.
Easy marking of flexible, semi-rigid and rigid cables and wires.
Porovnat
Cable label, self laminating, white/transparent, thermal transfer print, 12.70x12.70mm, H2=36.50mm, 5000pcs.
TAG2TD6-323-CL/WH 596-02320
Porovnat
Přidat do sledovaných položek
5000 pcs.
White (WH), Transparent (CL) TAG2TD6-323-CL/WH 596-02320
Cable label, self laminating, white/transparent, thermal transfer print, 9.00x12.70mm, H2=23.80mm, 10000pcs.
Easy marking of flexible, semi-rigid and rigid cables and wires.
Porovnat
Cable label, self laminating, white/transparent, thermal transfer print, 9.00x12.70mm, H2=23.80mm, 10000pcs.
TAG36TD7-323-CL/WH 596-36320
Porovnat
Přidat do sledovaných položek
10000 pcs.
White (WH), Transparent (CL) TAG36TD7-323-CL/WH 596-36320
Cable label, self laminating, white/transparent, thermal transfer print, 38.10x25.40mm, H2=187.20mm, 1000pcs.
Easy marking of flexible, semi-rigid and rigid cables and wires.
Porovnat
Cable label, self laminating, white/transparent, thermal transfer print, 38.10x25.40mm, H2=187.20mm, 1000pcs.
TAG38TD3-323-CL/WH 596-38320
Porovnat
Přidat do sledovaných položek
1000 pcs.
White (WH), Transparent (CL) TAG38TD3-323-CL/WH 596-38320
Cable label, self laminating, white/transparent, thermal transfer print, 25.40x25.40mm, H2=95.25mm, 1000pcs.
Easy marking of flexible, semi-rigid and rigid cables and wires.
Porovnat
Cable label, self laminating, white/transparent, thermal transfer print, 25.40x25.40mm, H2=95.25mm, 1000pcs.
TAG3TD3-323-CL/WH 596-03320
Porovnat
Přidat do sledovaných položek
1000 pcs.
White (WH), Transparent (CL) TAG3TD3-323-CL/WH 596-03320
Cable label, self laminating, white/transparent, thermal transfer print, 8.80x25.40mm, H2=19.05mm, 5000pcs.
Easy marking of flexible, semi-rigid and rigid cables and wires.
Porovnat
Cable label, self laminating, white/transparent, thermal transfer print, 8.80x25.40mm, H2=19.05mm, 5000pcs.
TAG51TD3-323-CL/WH 596-51320
Porovnat
Přidat do sledovaných položek
5000 pcs.
White (WH), Transparent (CL) TAG51TD3-323-CL/WH 596-51320
Cable label, self laminating, white/transparent, thermal transfer print, 25.40x50.80mm, H2=95.25mm, 500pcs.
Easy marking of flexible, semi-rigid and rigid cables and wires.
Porovnat
Cable label, self laminating, white/transparent, thermal transfer print, 25.40x50.80mm, H2=95.25mm, 500pcs.
TAG6TD1-323-CL/WH 596-06320
Porovnat
Přidat do sledovaných položek
500 pcs.
White (WH), Transparent (CL) TAG6TD1-323-CL/WH 596-06320
Cable tie outside serrated, 250.0x4.65mm, ⌀4.0-65.0mm, beige, 100pcs.
PT2A PEEK cable tie for extreme temperature range for excellent performance in a range of environments.
Porovnat
Cable tie outside serrated, 250.0x4.65mm, ⌀4.0-65.0mm, beige, 100pcs.
PT3B-PEEK-BGE 118-00116
Porovnat
Přidat do sledovaných položek
100 pcs.
Beige (BGE) PT3B-PEEK-BGE 118-00116
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.3 mm, M4 Screw, beige, 100pcs.
CTAM mounts for applications with limited space.
Porovnat
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.3 mm, M4 Screw, beige, 100pcs.
CTAM1-PEEK-BGE 151-00757
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Beige (BGE) CTAM1-PEEK-BGE 151-00757
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Cable clip for hole (round), ⌀7.8 - 8.2 mm
Porovnat
Cable clip for hole (round), ⌀7.8 - 8.2 mm
CTCLPROFILE-PA66HIRHS-BK 151-00026
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) CTCLPROFILE-PA66HIRHS-BK 151-00026
Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀7.0mm, black, 500pcs.
CNCTC8FT6.5LG Clamps.
Porovnat
Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀7.0mm, black, 500pcs.
CNCTC8FT6.5LG-PA66HIRHS-BK 151-01038
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) CNCTC8FT6.5LG-PA66HIRHS-BK 151-01038
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
2-piece fixing tie with edge clip 1-3mm, side fixing.
Porovnat
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
T50ROSEC21-PA66HS/PA66HIRHS-BK 156-00010
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROSEC21-PA66HS/PA66HIRHS-BK 156-00010
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
2-piece fixing tie with EdgeClip for side cable routing.
Porovnat
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
T50ROSEC24-PA66HS/PA66HIRHS-BK 156-00007
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROSEC24-PA66HS/PA66HIRHS-BK 156-00007
Fixing tie for edge, inside serrated, ⌀4.0-35.0mm, black, 500pcs.
2-Piece Fixing Tie with EdgeClip for vertical cable routing over the edge.
Porovnat
Fixing tie for edge, inside serrated, ⌀4.0-35.0mm, black, 500pcs.
T30REC4B-PA66HS/PA66HIRHS-BK 150-76080
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T30REC4B-PA66HS/PA66HIRHS-BK 150-76080
Fixing tie for edge, inside serrated, ⌀1.5-22.0mm, black, 500pcs.
Two piece assembly allows the edge clip to slide along the cable tie strap to ensure proper orientation.
Porovnat
Fixing tie for edge, inside serrated, ⌀1.5-22.0mm, black, 500pcs.
T18REC9SD-PA66HS/PA66HIRHS-BK 155-37104
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T18REC9SD-PA66HS/PA66HIRHS-BK 155-37104
Downlight cover, L=592mm, W=592mm, H=35mm, ⌀75 - 314 mm, black, 10pcs.
SpotClip-Plate fits perfect into standard grid ceilings with a width of 600 mm.
Porovnat
Downlight cover, L=592mm, W=592mm, H=35mm, ⌀75 - 314 mm, black, 10pcs.
SpotClip-Plate 600-PA66HS-BK 148-00117
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) SpotClip-Plate 600-PA66HS-BK 148-00117
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Porovnat
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 100pcs.
H3P-PA66HS-BK 211-60002
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) H3P-PA66HS-BK 211-60002
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Porovnat
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 100pcs.
H4P-PA66HS-BK 211-60003
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) H4P-PA66HS-BK 211-60003
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.
H5P-PA66HS-BK 211-60004
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) H5P-PA66HS-BK 211-60004
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Porovnat
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 100pcs.
H6P-PA66HS-BK 211-60005
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) H6P-PA66HS-BK 211-60005
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C P-Clamp with chloroprene insert.
Porovnat
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Corrugated tube clip for hole (oval), nom⌀28.0mm, black, 500pcs.
Simple and secure installation of pipes or hoses to panels.
Porovnat
Corrugated tube clip for hole (oval), nom⌀28.0mm, black, 500pcs.
RCC D28-PA66HIRHS-BK 151-00598
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) RCC D28-PA66HIRHS-BK 151-00598
Corrugated tube clip for hole (oval), nom⌀21.0mm, black, 100pcs.
Fixing element for convoluted tubes 22 mm with arrow head for oval holes 6.2 x 12.2 mm.
Porovnat
Corrugated tube clip for hole (oval), nom⌀21.0mm, black, 100pcs.
RCC D21-PA66HIRHS-BK 150-92300
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) RCC D21-PA66HIRHS-BK 150-92300
Corrugated tube clip for hole (round), nom⌀10.0mm, black, 500pcs.
Clip includes an internal rib that spans the inside of the bracket to fit securely into the profile of the tubing to prevent lateral movement and slipping of the tubing.
Porovnat
Corrugated tube clip for hole (round), nom⌀10.0mm, black, 500pcs.
CTC10FT6LG-PA66HIRHS-BK 151-00018
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) CTC10FT6LG-PA66HIRHS-BK 151-00018
Cable tag, laser print, 48.0x9.5mm, beige, bag=2500pcs.
HFTP48-PEEK-Tiptag.
Porovnat
Cable tag, laser print, 48.0x9.5mm, beige, bag=2500pcs.
HFTP48-PEEK-BGE 151-00911
Porovnat
Přidat do sledovaných položek
2500 pcs.
Beige (BGE) HFTP48-PEEK-BGE 151-00911
Label, white, thermal transfer print, 6.35x25.40mm, 7500pcs.
Porovnat
Label, white, thermal transfer print, 6.35x25.40mm, 7500pcs.
TAG01TD3-1206-WH 596-01120
Porovnat
Přidat do sledovaných položek
7500 reel
White gloss (GSWH) TAG01TD3-1206-WH 596-01120
Label, white, thermal transfer print, 20.00x65.00mm, 2500pcs.
Porovnat
Label, white, thermal transfer print, 20.00x65.00mm, 2500pcs.
TAG4TD1-1206-WH 596-41206
Porovnat
Přidat do sledovaných položek
2500 reel
White gloss (GSWH) TAG4TD1-1206-WH 596-41206
Label, white, thermal transfer print, 6.35x19.05mm, 10000pcs.
Porovnat
Label, white, thermal transfer print, 6.35x19.05mm, 10000pcs.
TAG13TD4-1206-WH 596-12061
Porovnat
Přidat do sledovaných položek
10000 reel
White gloss (GSWH) TAG13TD4-1206-WH 596-12061
Label, white, thermal transfer print, 12.70x25.40mm, 7500pcs.
Porovnat
Label, white, thermal transfer print, 12.70x25.40mm, 7500pcs.
TAG15TD3-1206-WH 596-12615
Porovnat
Přidat do sledovaných položek
7500 reel
White gloss (GSWH) TAG15TD3-1206-WH 596-12615
Label, white, thermal transfer print, 6.35x22.86mm, 10000pcs.
Porovnat
Label, white, thermal transfer print, 6.35x22.86mm, 10000pcs.
TAG16TD3-1206-WH 596-12616
Porovnat
Přidat do sledovaných položek
10000 reel
White gloss (GSWH) TAG16TD3-1206-WH 596-12616
Label, white, thermal transfer print, 6.35x38.10mm, 5000pcs.
Porovnat
Label, white, thermal transfer print, 6.35x38.10mm, 5000pcs.
TAG17TD2-1206-WH 596-12617
Porovnat
Přidat do sledovaných položek
5000 reel
White gloss (GSWH) TAG17TD2-1206-WH 596-12617
Label, white, thermal transfer print, 19.05x38.10mm, 2500pcs.
Porovnat
Label, white, thermal transfer print, 19.05x38.10mm, 2500pcs.
TAG27TD2-1206-WH 596-12627
Porovnat
Přidat do sledovaných položek
2500 reel
White gloss (GSWH) TAG27TD2-1206-WH 596-12627
Label, white, thermal transfer print, 9.53x25.40mm, 7500pcs.
Porovnat
Label, white, thermal transfer print, 9.53x25.40mm, 7500pcs.
TAG34TD3-1206-WH 596-12634
Porovnat
Přidat do sledovaných položek
7500 reel
White gloss (GSWH) TAG34TD3-1206-WH 596-12634
Label, white, thermal transfer print, 9.53x31.75mm, 7500pcs.
Porovnat
Label, white, thermal transfer print, 9.53x31.75mm, 7500pcs.
TAG35TD3-1206-WH 596-12635
Porovnat
Přidat do sledovaných položek
7500 reel
White gloss (GSWH) TAG35TD3-1206-WH 596-12635
Label, white, thermal transfer print, 4.75x25.40mm, 10000pcs.
Porovnat
Label, white, thermal transfer print, 4.75x25.40mm, 10000pcs.
TAG61TD3-1206-WH 596-12661
Porovnat
Přidat do sledovaných položek
10000 reel
White gloss (GSWH) TAG61TD3-1206-WH 596-12661
Label, white, thermal transfer print, 50.80x76.20mm, 500pcs.
Porovnat
Label, white, thermal transfer print, 50.80x76.20mm, 500pcs.
TAG62TD1-1206-WH 596-12662
Porovnat
Přidat do sledovaných položek
500 reel
White gloss (GSWH) TAG62TD1-1206-WH 596-12662
Label, white, thermal transfer print, 38.10x63.50mm, 1000pcs.
Porovnat
Label, white, thermal transfer print, 38.10x63.50mm, 1000pcs.
TAG63TD1-1206-WH 596-12663
Porovnat
Přidat do sledovaných položek
1000 reel
White gloss (GSWH) TAG63TD1-1206-WH 596-12663
Label, white, thermal transfer print, 36.50x88.90mm, 1000pcs.
Porovnat
Label, white, thermal transfer print, 36.50x88.90mm, 1000pcs.
TAG64TD1-1206-WH 596-12664
Porovnat
Přidat do sledovaných položek
1000 reel
White gloss (GSWH) TAG64TD1-1206-WH 596-12664
Label, white, thermal transfer print, 36.50x76.20mm, 1000pcs.
Porovnat
Label, white, thermal transfer print, 36.50x76.20mm, 1000pcs.
TAG65TD1-1206-WH 596-12665
Porovnat
Přidat do sledovaných položek
1000 reel
White gloss (GSWH) TAG65TD1-1206-WH 596-12665
Label, white, thermal transfer print, 31.75x38.10mm, 2500pcs.
Porovnat
Label, white, thermal transfer print, 31.75x38.10mm, 2500pcs.
TAG67TD2-1206-WH 596-12667
Porovnat
Přidat do sledovaných položek
2500 reel
White gloss (GSWH) TAG67TD2-1206-WH 596-12667
Label, white, thermal transfer print, 11.10x12.70mm, 15000pcs.
Porovnat
Label, white, thermal transfer print, 11.10x12.70mm, 15000pcs.
TAG71TD6-1206-WH 596-12671
Porovnat
Přidat do sledovaných položek
15000 reel
White gloss (GSWH) TAG71TD6-1206-WH 596-12671
Label, white, thermal transfer print, 31.75x69.85mm, 1000pcs.
Porovnat
Label, white, thermal transfer print, 31.75x69.85mm, 1000pcs.
TAG72TD1-1206-WH 596-12672
Porovnat
Přidat do sledovaných položek
1000 reel
White gloss (GSWH) TAG72TD1-1206-WH 596-12672
Label, white, thermal transfer print, 25.40x50.80mm, 2000pcs.
Porovnat
Label, white, thermal transfer print, 25.40x50.80mm, 2000pcs.
TAG73TD1-1206-WH 596-12673
Porovnat
Přidat do sledovaných položek
2000 reel
White gloss (GSWH) TAG73TD1-1206-WH 596-12673
Label, white, thermal transfer print, 50.80x63.50mm, 500pcs.
Porovnat
Label, white, thermal transfer print, 50.80x63.50mm, 500pcs.
TAG76TD1-1206-WH 596-61206
Porovnat
Přidat do sledovaných položek
500 reel
White gloss (GSWH) TAG76TD1-1206-WH 596-61206
Label, white, thermal transfer print, 22.86x50.80mm, 2000pcs.
Porovnat
Label, white, thermal transfer print, 22.86x50.80mm, 2000pcs.
TAG77TD1-1206-WH 596-71206
Porovnat
Přidat do sledovaných položek
2000 reel
White gloss (GSWH) TAG77TD1-1206-WH 596-71206
Cable label, self laminating, white/transparent, thermal transfer print, 19.05x25.40mm, H2=57.10mm, 2500pcs.
Easy marking of flexible, semi-rigid and rigid cables and wires.
Porovnat
Cable label, self laminating, white/transparent, thermal transfer print, 19.05x25.40mm, H2=57.10mm, 2500pcs.
TAG9TD3-323-CL/WH 596-09320
Porovnat
Přidat do sledovaných položek
2500 pcs.
White (WH), Transparent (CL) TAG9TD3-323-CL/WH 596-09320
Fixing tie for hole (round), outside serrated, ⌀1.0-45.0mm, grey/beige, 100pcs.
The fixing tie T50ROSP1SFT6.5 for high temperature applications.
Porovnat
Fixing tie for hole (round), outside serrated, ⌀1.0-45.0mm, grey/beige, 100pcs.
T50ROSP1SFT6.5-PA46/PEEK-GY/BGE 156-00455
Porovnat
Přidat do sledovaných položek
100 pcs.
Grey (GY), Beige (BGE) T50ROSP1SFT6.5-PA46/PEEK-GY/BGE 156-00455
Fixing tie for hole (round), outside serrated, ⌀1.0-45.0mm, grey/beige, 100pcs.
Porovnat
Fixing tie for hole (round), outside serrated, ⌀1.0-45.0mm, grey/beige, 100pcs.
T50ROSP2SFT6.5-PA46/PEEK-GY/BGE 156-00456
Porovnat
Přidat do sledovaných položek
100 pcs.
Grey (GY), Beige (BGE) T50ROSP2SFT6.5-PA46/PEEK-GY/BGE 156-00456
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀5.1 mm, M5 Screw, beige, 100pcs.
CTAM mounts for applications with limited space.
Porovnat
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀5.1 mm, M5 Screw, beige, 100pcs.
CTAM2-PEEK-BGE 151-00758
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Beige (BGE) CTAM2-PEEK-BGE 151-00758
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
ELASTOSIL® RT 601 A/B is a pourable, addition-curing RTV-2 silicone rubber.
RT601A in a metal can and RT601B in a plastic bottle in total with 1kg
Porovnat
ELASTOSIL® RT 601 A/B is a pourable, addition-curing RTV-2 silicone rubber.
EL RT601 A+B-SI-CL 908-52065
Porovnat
Přidat do sledovaných položek
1 kg
Transparent (CL) EL RT601 A+B-SI-CL 908-52065
ELASTOSIL® RT 601 A/B is a pourable, addition-curing RTV-2 silicone rubber.
RT601A in a metal can and RT601B in a plastic bottle in total with 5kg
Porovnat
ELASTOSIL® RT 601 A/B is a pourable, addition-curing RTV-2 silicone rubber.
EL RT601 A+B-SI-CL 908-52066
Porovnat
Přidat do sledovaných položek
5 kg
Transparent (CL) EL RT601 A+B-SI-CL 908-52066
Fixing tie for edge, inside serrated, ⌀1.2-45.0mm, black, 500pcs.
Porovnat
Fixing tie for edge, inside serrated, ⌀1.2-45.0mm, black, 500pcs.
T50REC9-PA66HS/PA66HIRHS-BK 156-01280
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50REC9-PA66HS/PA66HIRHS-BK 156-01280
Fixing tie for edge, inside serrated, ⌀1.5-32.0mm, black, 500pcs.
Push-mount rotating edge clip provides flexible routing of cable bundles.
Porovnat
Fixing tie for edge, inside serrated, ⌀1.5-32.0mm, black, 500pcs.
CBT30MR-PA66HS/POM-BK 156-00049
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) CBT30MR-PA66HS/POM-BK 156-00049
Cable tie inside serrated, 205x4.7mm, ⌀1.5-45.0mm, black, 100pcs.
The Clamp Tie head design contains clamping rails to provide full circumferential compression around bundles.
Porovnat
Cable tie inside serrated, 205x4.7mm, ⌀1.5-45.0mm, black, 100pcs.
CTT60R-PA66HS-BK 112-52112
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) CTT60R-PA66HS-BK 112-52112
Fixing tie for edge, inside serrated, ⌀1.0-45.0mm, black, 500pcs.
2-piece fixing tie for edges 1-3 mm, side fixation.
Porovnat
Fixing tie for edge, inside serrated, ⌀1.0-45.0mm, black, 500pcs.
T50REC22-PA66W/PA66HIRHS-BK 156-00576
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50REC22-PA66W/PA66HIRHS-BK 156-00576
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Porovnat
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.
H2P-PA66HS-BK 211-60001
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) H2P-PA66HS-BK 211-60001
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
2-piece fixing tie with EdgeClip for side cable routing.
Porovnat
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSEC5B-PA66HS/PA66HIRHS-BK 150-40581
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROSEC5B-PA66HS/PA66HIRHS-BK 150-40581
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
Porovnat
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
T50ROSEC19-PA66HS/PA66HIRHS-BK 156-04602
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROSEC19-PA66HS/PA66HIRHS-BK 156-04602
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
Porovnat
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
T50ROSEC20-PA66HS/PA66HIRHS-BK 156-00020
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROSEC20-PA66HS/PA66HIRHS-BK 156-00020
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
T50ROSEC23 - the cable bundle runs parallel with the edge.
Porovnat
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
T50ROSEC23-PA66HS/PA66HIRHS-BK 156-00006
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROSEC23-PA66HS/PA66HIRHS-BK 156-00006
Fixing tie for edge, inside serrated, ⌀4.0-33.0mm, black, 500pcs.
2-piece fixing tie for edges 1 - 3 mm and harness routing on top parallel to the edge.
Porovnat
Fixing tie for edge, inside serrated, ⌀4.0-33.0mm, black, 500pcs.
T30REC4A-PA66HS/PA66HIRHS-BK 150-76090
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T30REC4A-PA66HS/PA66HIRHS-BK 150-76090
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
Two piece assembly allows the edge clip to slide along the cable tie strap to ensure proper orientation.
Porovnat
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
T50ROSEC9-PA66HS/PA66HIRHS-BK 156-05903
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROSEC9-PA66HS/PA66HIRHS-BK 156-05903
G-Wrap Seal 400mm
G-WRAP-400MM (shown open).
Porovnat
G-Wrap Seal 400mm
G-WRAP-400MM 857-50247
Porovnat
Přidat do sledovaných položek
1 pc.
Black (BK) G-WRAP-400MM 857-50247
ELASTOSIL® M 4400, pourable, condensation-curing, two-component silicone rubber that vulcanizes at room temperature.
M4440 in a metal bucket with 5kg
Porovnat
ELASTOSIL® M 4400, pourable, condensation-curing, two-component silicone rubber that vulcanizes at room temperature.
EL M4440-SI-GY 908-53056
Porovnat
Přidat do sledovaných položek
5 kg
Light Grey (LTGY) EL M4440-SI-GY 908-53056
Fixing tie for screw fixation, inside serrated, ⌀15.0-105.0mm, black, 100pcs.
Porovnat
Fixing tie for screw fixation, inside serrated, ⌀15.0-105.0mm, black, 100pcs.
T120RHDM8-PA66HIRHS-BK 156-00408
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T120RHDM8-PA66HIRHS-BK 156-00408
ELASTOSIL® RT 622 A / B is a pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature.
RT622A in a plastic barrel and RT622B in a metal can in total with 30kg
Porovnat
ELASTOSIL® RT 622 A / B is a pourable, addition-curing, two-component silicone rubber that vulcanizes at room temperature.
EL RT622 A+B-SI-BN 908-52118
Porovnat
Přidat do sledovaných položek
30 kg
Redbrown (RDBN) EL RT622 A+B-SI-BN 908-52118
ELASTOSIL® RT K is a pourable, condensation-curing, two-component silicone rubber that vulcanizes at room temperature.
RT K in a metal can with 5kg
Porovnat
ELASTOSIL® RT K is a pourable, condensation-curing, two-component silicone rubber that vulcanizes at room temperature.
EL RT-K-SI-GY 908-52236
Porovnat
Přidat do sledovaných položek
5 kg
Light Grey (LTGY) EL RT-K-SI-GY 908-52236
Fixing tie for edge, inside serrated, ⌀4.0-19.0mm, black, 500pcs.
Edge Clip 10 (EC10) fitted onto a plastic panel to hold a ⌀ 6 mm harness.
Porovnat
Fixing tie for edge, inside serrated, ⌀4.0-19.0mm, black, 500pcs.
T50RDHEC4A-PA66HS/PA66HIRHS-BK 156-01721
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50RDHEC4A-PA66HS/PA66HIRHS-BK 156-01721
Protective laminate HELATAG, transparent, 11.43x27.94mm, 5000pcs.
Porovnat
Protective laminate HELATAG, transparent, 11.43x27.94mm, 5000pcs.
TAG0623TL3-323-CL 596-23321
Porovnat
Přidat do sledovaných položek
5000 pcs.
Transparent (CL) TAG0623TL3-323-CL 596-23321
Cable tie inside serrated, 202x4.6mm, ⌀1.5-50.0mm, grey, 100pcs.
Porovnat
Cable tie inside serrated, 202x4.6mm, ⌀1.5-50.0mm, grey, 100pcs.
T50R-PA46-GY 111-00824
Porovnat
Přidat do sledovaných položek
100 pcs.
Grey (GY) T50R-PA46-GY 111-00824
HAERTER T 77 is a standard curing agent for condensation curing RTV-2 silicones. When processed with a base compound of the product series RT or M.
Catalyst T77 in a tube with 90ml
Porovnat
HAERTER T 77 is a standard curing agent for condensation curing RTV-2 silicones. When processed with a base compound of the product series RT or M.
Hardener T77 908-53891
Porovnat
Přidat do sledovaných položek
100 g
Hardener T77 908-53891
Facebook  Instagram  Twitter  YouTube  LinkedIn  Corporate Blog 
Kontakt VOP Impressum Mapa stránek Newsletter Pokyny a závazky Zásady ochrany osobních údajů
Aktualizace: 06/07/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.281) | Aktualizace: 06/07/2025 | Nastavení ochrany osobních údajů
Hledat prodejce Kontakt