Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
16/12/2025

Výsledky pro "shipbuilding"

Nalezeno 2 691 výrobků 2 dalších položek
K dispozici jsou výsledky v následujících kategoriích:
Cable Ties and Fixings

Cable Ties and Fixings  (903)

Cable Ties Inside Serrated  (293) Cable Ties Outside Serrated  (29) Cable Ties, Releasable  (24) Cable Ties, Stainless Steel  (84) Cable Ties With Fixing Elements  (97) Cable Tie Mounts  (109) Fixing Elements  (23) Clips, Clamps and Plugs  (261)
Cable Ties and Fixings
Cable Ties and Fixings (903)
Insulation

Insulation  (578)

Heat Shrink Tubing  (444) Heat Shrinkable Moulded Shapes  (136) Insulating tubes  (3)
Insulation
Insulation (578)
Cable Protection Systems

Cable Protection Systems  (113)

Spiral-Reinforced Conduit Systems  (16) Protective Tubing and Spiral Binding  (53) Expandable Braided Sleeves  (18) Open Woven Sleeves  (43) Wiring Ducts and Accessories  (1)
Cable Protection Systems
Cable Protection Systems (113)
Electrical Installation

Electrical Installation  (201)

Wire Connectors  (21) Cable Rods  (2) Electrical Tapes  (91) Cast Resin Technology  (82) Gel Technology  (2) Chemicals  (3)
Electrical Installation
Electrical Installation (201)
Identification Systems

Identification Systems  (842)

Wire and Cable Markers  (681) Control Panel Labelling  (50) Industrial Identification  (40) RFID tags and cable ties  (56) Hazardous Area Identification  (48) Printers and Software  (19)
Identification Systems
Identification Systems (842)
Application Tooling

Application Tooling  (57)

Automatic Cable Tying System  (18) Application Tooling for Cable Ties  (20) Application Tooling for Snappers  (2) Application Tooling for Heat Shrinkable Tubing  (4) Application Tooling for Non Shrinkable Tubing  (12) Application Tooling for Braided Sleeves  (1)
Application Tooling
Application Tooling (57)
2 691 produkty
Resetovat vše
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 15°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 15°, black, 160pcs.
RCD15SM12-PA66HIRHSUV/ST/ZN-BK 151-01511
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD15SM12-PA66HIRHSUV/ST/ZN-BK 151-01511
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 15°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 15°, black, 160pcs.
RCD15SM6-PA66HIRHSUV/ST/ZN-BK 151-01664
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD15SM6-PA66HIRHSUV/ST/ZN-BK 151-01664
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 15°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 15°, black, 160pcs.
RCD15SM8-PA66HIRHSUV/ST/ZN-BK 151-01509
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD15SM8-PA66HIRHSUV/ST/ZN-BK 151-01509
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 180°, black, 140pcs.
Porovnat
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 180°, black, 140pcs.
RCD180LM10-PA66HIRHSUV/ST/ZN-BK 151-01507
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD180LM10-PA66HIRHSUV/ST/ZN-BK 151-01507
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 180°, black, 140pcs.
Porovnat
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 180°, black, 140pcs.
RCD180LM12-PA66HIRHSUV/ST/ZN-BK 151-01508
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD180LM12-PA66HIRHSUV/ST/ZN-BK 151-01508
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 140pcs.
Porovnat
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 140pcs.
RCD180LM6-PA66HIRHSUV/ST/ZN-BK 151-01663
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD180LM6-PA66HIRHSUV/ST/ZN-BK 151-01663
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 140pcs.
Porovnat
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 140pcs.
RCD180LM8-PA66HIRHSUV/ST/ZN-BK 151-01506
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD180LM8-PA66HIRHSUV/ST/ZN-BK 151-01506
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 140pcs.
Porovnat
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 140pcs.
RCD180LM8SS-PA666V0/SS304-BK 151-02735
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD180LM8SS-PA666V0/SS304-BK 151-02735
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 180°, black, 140pcs.
RCD180MM10.
Porovnat
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 180°, black, 140pcs.
RCD180MM10-PA66HIRHSUV/ST/ZN-BK 151-01504
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD180MM10-PA66HIRHSUV/ST/ZN-BK 151-01504
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 180°, black, 140pcs.
Porovnat
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 180°, black, 140pcs.
RCD180MM12-PA66HIRHSUV/ST/ZN-BK 151-01505
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD180MM12-PA66HIRHSUV/ST/ZN-BK 151-01505
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 140pcs.
Porovnat
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 140pcs.
RCD180MM6-PA66HIRHSUV/ST/ZN-BK 151-01662
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD180MM6-PA66HIRHSUV/ST/ZN-BK 151-01662
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 140pcs.
Porovnat
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 140pcs.
RCD180MM8-PA66HIRHSUV/ST/ZN-BK 151-01503
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD180MM8-PA66HIRHSUV/ST/ZN-BK 151-01503
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 140pcs.
Porovnat
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 140pcs.
RCD180MM8SS-PA666V0/SS304-BK 151-03111
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD180MM8SS-PA666V0/SS304-BK 151-03111
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.4 mm, 180°, black, 160pcs.
RCD180SM10.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.4 mm, 180°, black, 160pcs.
RCD180SM10SS-PA666V0/SS304-BK 151-03008
Porovnat
Přidat do sledovaných položek
160
Black (BK) RCD180SM10SS-PA666V0/SS304-BK 151-03008
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 180°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 180°, black, 160pcs.
RCD180SM12-PA66HIRHSUV/ST/ZN-BK 151-01502
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD180SM12-PA66HIRHSUV/ST/ZN-BK 151-01502
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 160pcs.
RCD180SM6-PA66HIRHSUV/ST/ZN-BK 151-01661
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD180SM6-PA66HIRHSUV/ST/ZN-BK 151-01661
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 3pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 3pcs.
RCD180SM6-PA66HIRHSUV/ST/ZN-BK 151-01673
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
3
Black (BK) RCD180SM6-PA66HIRHSUV/ST/ZN-BK 151-01673
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 160pcs.
RCD180SM8SS-PA666V0/SS304-BK 151-02734
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD180SM8SS-PA666V0/SS304-BK 151-02734
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 30°, black, 140pcs.
Porovnat
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 30°, black, 140pcs.
RCD30LM10-PA66HIRHSUV/ST/ZN-BK 151-01516
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD30LM10-PA66HIRHSUV/ST/ZN-BK 151-01516
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 30°, black, 140pcs.
Porovnat
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 30°, black, 140pcs.
RCD30LM12-PA66HIRHSUV/ST/ZN-BK 151-01517
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD30LM12-PA66HIRHSUV/ST/ZN-BK 151-01517
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 30°, black, 140pcs.
Porovnat
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 30°, black, 140pcs.
RCD30LM6-PA66HIRHSUV/ST/ZN-BK 151-01666
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD30LM6-PA66HIRHSUV/ST/ZN-BK 151-01666
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 30°, black, 140pcs.
Porovnat
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 30°, black, 140pcs.
RCD30LM8-PA66HIRHSUV/ST/ZN-BK 151-01515
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD30LM8-PA66HIRHSUV/ST/ZN-BK 151-01515
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 30°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 30°, black, 160pcs.
RCD30SM10-PA66HIRHSUV/ST/ZN-BK 151-01513
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD30SM10-PA66HIRHSUV/ST/ZN-BK 151-01513
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 30°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 30°, black, 160pcs.
RCD30SM12-PA66HIRHSUV/ST/ZN-BK 151-01514
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD30SM12-PA66HIRHSUV/ST/ZN-BK 151-01514
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 30°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 30°, black, 160pcs.
RCD30SM6-PA66HIRHSUV/ST/ZN-BK 151-01665
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD30SM6-PA66HIRHSUV/ST/ZN-BK 151-01665
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 30°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 30°, black, 160pcs.
RCD30SM8-PA66HIRHSUV/ST/ZN-BK 151-01512
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD30SM8-PA66HIRHSUV/ST/ZN-BK 151-01512
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 90°, black, 140pcs.
Porovnat
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 90°, black, 140pcs.
RCD90LM10-PA66HIRHSUV/ST/ZN-BK 151-01522
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD90LM10-PA66HIRHSUV/ST/ZN-BK 151-01522
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 90°, black, 140pcs.
Porovnat
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 90°, black, 140pcs.
RCD90LM12-PA66HIRHSUV/ST/ZN-BK 151-01523
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD90LM12-PA66HIRHSUV/ST/ZN-BK 151-01523
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 90°, black, 140pcs.
Porovnat
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 90°, black, 140pcs.
RCD90LM6-PA66HIRHSUV/ST/ZN-BK 151-01628
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD90LM6-PA66HIRHSUV/ST/ZN-BK 151-01628
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 90°, black, 140pcs.
Porovnat
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 90°, black, 140pcs.
RCD90LM8-PA66HIRHSUV/ST/ZN-BK 151-01521
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD90LM8-PA66HIRHSUV/ST/ZN-BK 151-01521
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 90°, black, 140pcs.
Porovnat
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 90°, black, 140pcs.
RCD90LM8SS-PA666V0/SS304-BK 151-03144
Porovnat
Přidat do sledovaných položek
140
Black (BK) RCD90LM8SS-PA666V0/SS304-BK 151-03144
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 90°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 90°, black, 160pcs.
RCD90SM10-PA66HIRHSUV/ST/ZN-BK 151-01519
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD90SM10-PA66HIRHSUV/ST/ZN-BK 151-01519
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 90°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 90°, black, 160pcs.
RCD90SM12-PA66HIRHSUV/ST/ZN-BK 151-01520
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD90SM12-PA66HIRHSUV/ST/ZN-BK 151-01520
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 90°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 90°, black, 160pcs.
RCD90SM6-PA66HIRHSUV/ST/ZN-BK 151-01667
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD90SM6-PA66HIRHSUV/ST/ZN-BK 151-01667
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 90°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 90°, black, 160pcs.
RCD90SM8-PA66HIRHSUV/ST/ZN-BK 151-01518
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD90SM8-PA66HIRHSUV/ST/ZN-BK 151-01518
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 90°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 90°, black, 160pcs.
RCD90SM8SS-PA666V0/SS304-BK 151-03011
Porovnat
Přidat do sledovaných položek
160
Black (BK) RCD90SM8SS-PA666V0/SS304-BK 151-03011
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, natural, 1000pcs.
H7P-PA66-NA 211-60079
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) H7P-PA66-NA 211-60079
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 760.0x7.6mm, ⌀5.0-225mm, natural, 50pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 760.0x7.6mm, ⌀5.0-225mm, natural, 50pcs.
T120L-PA66-NA 111-12429
Porovnat
Přidat do sledovaných položek
50 pcs.
Natural (NA) T120L-PA66-NA 111-12429
Cable tie inside serrated, 460x7.6mm, ⌀15.0-125mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 460x7.6mm, ⌀15.0-125mm, natural, 100pcs.
T120M-PA66-NA 111-12619
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) T120M-PA66-NA 111-12619
Cable tie inside serrated, 820.0x8.9mm, ⌀8.0-245.0mm, black, 25pcs.
Heavy duty T-Series cable ties feature inside serrations to provide a positive hold on wire and cable bundles.
Porovnat
Cable tie inside serrated, 820.0x8.9mm, ⌀8.0-245.0mm, black, 25pcs.
T150L-PA66W-BK 111-15460
Porovnat
Přidat do sledovaných položek
25 pcs.
Black (BK) T150L-PA66W-BK 111-15460
Cable tie inside serrated, 530.0x8.9mm, ⌀8.0-150.0mm, black, 25pcs.
Heavy duty T-Series cable ties feature inside serrations to provide a positive hold on wire and cable bundles.
Porovnat
Cable tie inside serrated, 530.0x8.9mm, ⌀8.0-150.0mm, black, 25pcs.
T150M-PA66W-BK 111-15660
Porovnat
Přidat do sledovaných položek
25 pcs.
Black (BK) T150M-PA66W-BK 111-15660
Cable tie inside serrated, 145.0x2.5mm, ⌀1.5-35.0mm, natural, 1000pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 145.0x2.5mm, ⌀1.5-35.0mm, natural, 1000pcs.
T18I-PA66HS-NA 111-02359
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) T18I-PA66HS-NA 111-02359
Cable tie inside serrated, 145.0x2.5mm, ⌀1.5-35mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 145.0x2.5mm, ⌀1.5-35mm, black, 100pcs.
T18I-PA66HS-BK 111-02358
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T18I-PA66HS-BK 111-02358
Fixing tie for hole (round), inside serrated, ⌀4.0-45.0mm, black, 1000pcs.
Pre-assembled 2-piece mounting tie for round holes consisting of a T50R cable tie and FT7 foot part.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀4.0-45.0mm, black, 1000pcs.
T50RFT7-PA66HS-BK 156-05311
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) T50RFT7-PA66HS-BK 156-05311
Fixing tie for hole (round), inside serrated, ⌀8.0-80.0mm, black, 100pcs.
These fir tree fixings can also be used in threaded, blind holes.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀8.0-80.0mm, black, 100pcs.
T120IFT9-PA66HIR(S)-BK 156-00200
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T120IFT9-PA66HIR(S)-BK 156-00200
Fixing tie for hole (round), inside serrated, ⌀1.0-45.0mm, black, 500pcs.
Being a two-piece assembly allows the tie head to be located in the most convenient position.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀1.0-45.0mm, black, 500pcs.
T50RSFT6.5D18-PA66HS/PA66HIRHS-BK 150-37691
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50RSFT6.5D18-PA66HS/PA66HIRHS-BK 150-37691
Fixing tie for stud, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Head allows for a 0.2
Porovnat
Fixing tie for stud, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSDSBS5-PA66HS/PA66HIRHS-BK 150-56199
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROSDSBS5-PA66HS/PA66HIRHS-BK 150-56199
Cable tie mount for adhesive use, Wmax=4.1mm, ⌀3.1 mm, Adhesive, white, 100pcs.
4-way cable tie entry for more installation options.
Porovnat
Cable tie mount for adhesive use, Wmax=4.1mm, ⌀3.1 mm, Adhesive, white, 100pcs.
MB3A-PA66-WH 151-28349
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) MB3A-PA66-WH 151-28349
Cable tie mount for adhesive use, Wmax=5.4mm, ⌀4.0 mm, Adhesive, white, 100pcs.
Cable Tie Mounts MB and TY.
Porovnat
Cable tie mount for adhesive use, Wmax=5.4mm, ⌀4.0 mm, Adhesive, white, 100pcs.
MB4A-PA66-WH 151-28469
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) MB4A-PA66-WH 151-28469
Cable tie mount for adhesive use, Wmax=4.4mm, ⌀3.1 mm, black, 100pcs.
SolidTack Family with special adhesive.
Porovnat
Cable tie mount for adhesive use, Wmax=4.4mm, ⌀3.1 mm, black, 100pcs.
MB3APT-A-PA66-BK 151-02244
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) MB3APT-A-PA66-BK 151-02244
Cable tie mount for adhesive use, Wmax=5.6mm, ⌀4.0 mm, black, 100pcs.
Porovnat
Cable tie mount for adhesive use, Wmax=5.6mm, ⌀4.0 mm, black, 100pcs.
MB4APT-A-PA66-BK 151-02245
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) MB4APT-A-PA66-BK 151-02245
Cable tie mount for adhesive use, Wmax=5.4mm, white, 100pcs.
FlexTack FMB for round and angled surfaces
Porovnat
Cable tie mount for adhesive use, Wmax=5.4mm, white, 100pcs.
FMB4APT-A-PA66HS-WH 151-02977
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) FMB4APT-A-PA66HS-WH 151-02977
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀5.5 mm, M4 Screw, natural, 100pcs.
Porovnat
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀5.5 mm, M4 Screw, natural, 100pcs.
LKC-PA66-NA 151-27019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) LKC-PA66-NA 151-27019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie tool for 4.5 - 16.0mm, manual, 0.514kg, grey
Porovnat
Cable tie tool for 4.5 - 16.0mm, manual, 0.514kg, grey
MK9SST-PA66GF30-GY 110-95000
Porovnat
Přidat do sledovaných položek
1 pcs.
Grey (GY) MK9SST-PA66GF30-GY 110-95000
Fixing tie for hole (round), inside serrated, ⌀1.5-31.0mm, black, 1000pcs.
The flexible 'discs' adjusts to take up variations in panel thickness - ensuring a firm fixing at all times.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀1.5-31.0mm, black, 1000pcs.
T50SST5-PA66HS-BK 126-00017
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) T50SST5-PA66HS-BK 126-00017
Heat Shrinkable Tubing 3:1 flexible 1.5/0.5 black
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Porovnat
Heat Shrinkable Tubing 3:1 flexible 1.5/0.5 black
TF31-1.5/0.5-PO-X-BK 333-30150
Porovnat
Přidat do sledovaných položek
30 metre
Black (BK) TF31-1.5/0.5-PO-X-BK 333-30150
Heat Shrinkable Tubing 3:1 flexible 3/1 black
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Porovnat
Heat Shrinkable Tubing 3:1 flexible 3/1 black
TF31-3/1-PO-X-BK 333-30300
Porovnat
Přidat do sledovaných položek
30 metre
Black (BK) TF31-3/1-PO-X-BK 333-30300
Heat Shrinkable Tubing 3:1 flexible 3/1 black
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Porovnat
Heat Shrinkable Tubing 3:1 flexible 3/1 black
TF31-3/1-PO-X-BK 333-40300
Porovnat
Přidat do sledovaných položek
150 metre
Black (BK) TF31-3/1-PO-X-BK 333-40300
Heat Shrinkable Tubing 3:1 flexible 6/2 black
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Porovnat
Heat Shrinkable Tubing 3:1 flexible 6/2 black
TF31-6/2-PO-X-BK 333-30600
Porovnat
Přidat do sledovaných položek
30 metre
Black (BK) TF31-6/2-PO-X-BK 333-30600
Heat Shrinkable Tubing 3:1 flexible 6/2 black
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Porovnat
Heat Shrinkable Tubing 3:1 flexible 6/2 black
TF31-6/2-PO-X-BK 333-40600
Porovnat
Přidat do sledovaných položek
150 metre
Black (BK) TF31-6/2-PO-X-BK 333-40600
Heat Shrinkable Tubing 3:1 flexible 9/3 black
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Porovnat
Heat Shrinkable Tubing 3:1 flexible 9/3 black
TF31-9/3-PO-X-BK 333-20900
Porovnat
Přidat do sledovaných položek
150 metre
Black (BK) TF31-9/3-PO-X-BK 333-20900
Heat Shrinkable Tubing 3:1 flexible 9/3 black
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Porovnat
Heat Shrinkable Tubing 3:1 flexible 9/3 black
TF31-9/3-PO-X-BK 333-30900
Porovnat
Přidat do sledovaných položek
30 metre
Black (BK) TF31-9/3-PO-X-BK 333-30900
Heat Shrinkable Tubing 3:1 flexible 9/3 red
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Porovnat
Heat Shrinkable Tubing 3:1 flexible 9/3 red
TF31-9/3-PO-X-RD 333-30902
Porovnat
Přidat do sledovaných položek
30 metre
Red (RD) TF31-9/3-PO-X-RD 333-30902
Heat Shrinkable Tubing 3:1 flexible 9/3 yellow
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Porovnat
Heat Shrinkable Tubing 3:1 flexible 9/3 yellow
TF31-9/3-PO-X-YE 333-30904
Porovnat
Přidat do sledovaných položek
30 metre
Yellow (YE) TF31-9/3-PO-X-YE 333-30904
Heat Shrinkable Tubing 3:1 flexible 12/4 red
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Porovnat
Heat Shrinkable Tubing 3:1 flexible 12/4 red
TF31-12/4-PO-X-RD 333-31202
Porovnat
Přidat do sledovaných položek
30 metre
Red (RD) TF31-12/4-PO-X-RD 333-31202
Heat Shrinkable Tubing 3:1 flexible 12/4 green
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Porovnat
Heat Shrinkable Tubing 3:1 flexible 12/4 green
TF31-12/4-PO-X-GN 333-31205
Porovnat
Přidat do sledovaných položek
30 metre
Green (GN) TF31-12/4-PO-X-GN 333-31205
Heat Shrinkable Tubing 3:1 flexible 18/6 white
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Porovnat
Heat Shrinkable Tubing 3:1 flexible 18/6 white
TF31-18/6-PO-X-WH 333-31809
Porovnat
Přidat do sledovaných položek
30 metre
White (WH) TF31-18/6-PO-X-WH 333-31809
Heat Shrinkable Tubing 3:1 flexible 24/8 black
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Porovnat
Heat Shrinkable Tubing 3:1 flexible 24/8 black
TF31-24/8-PO-X-BK 333-42400
Porovnat
Přidat do sledovaných položek
60 metre
Black (BK) TF31-24/8-PO-X-BK 333-42400
Heat Shrinkable Tubing 3:1 flexible 40/13 black
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Porovnat
Heat Shrinkable Tubing 3:1 flexible 40/13 black
TF31-40/13-PO-X-BK 333-24000
Porovnat
Přidat do sledovaných položek
60 metre
Black (BK) TF31-40/13-PO-X-BK 333-24000
Heat Shrinkable Tubing 3:1 flexible 40/13 black
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Porovnat
Heat Shrinkable Tubing 3:1 flexible 40/13 black
TF31-40/13-PO-X-BK 333-34000
Porovnat
Přidat do sledovaných položek
30 metre
Black (BK) TF31-40/13-PO-X-BK 333-34000
Heat Shrinkable Tubing 3:1 flexible 40/13 red
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Porovnat
Heat Shrinkable Tubing 3:1 flexible 40/13 red
TF31-40/13-PO-X-RD 333-34002
Porovnat
Přidat do sledovaných položek
30 metre
Red (RD) TF31-40/13-PO-X-RD 333-34002
Heat Shrinkable Tubing 3:1 flexible 40/13 yellow
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Porovnat
Heat Shrinkable Tubing 3:1 flexible 40/13 yellow
TF31-40/13-PO-X-YE 333-34004
Porovnat
Přidat do sledovaných položek
30 metre
Yellow (YE) TF31-40/13-PO-X-YE 333-34004
Heat Shrinkable Tubing 3:1 on a Reel 1.5/0.5 black
Porovnat
Heat Shrinkable Tubing 3:1 on a Reel 1.5/0.5 black
HIS-3-1.5/0.5-PO-X-BK 308-30150
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) HIS-3-1.5/0.5-PO-X-BK 308-30150
Heat Shrinkable Tubing 3:1 on a Reel 9/3 green/yellow
Porovnat
Heat Shrinkable Tubing 3:1 on a Reel 9/3 green/yellow
HIS-3-9/3-PO-X-GNYE 308-30907
Porovnat
Přidat do sledovaných položek
1 pcs.
Green-Yellow (GNYE) HIS-3-9/3-PO-X-GNYE 308-30907
Heat Shrinkable Tubing 3:1 on a Reel 18/6 black
Porovnat
Heat Shrinkable Tubing 3:1 on a Reel 18/6 black
HIS-3-18/6-PO-X-BK 308-31800
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) HIS-3-18/6-PO-X-BK 308-31800
Heat Shrinkable Tubing 2:1 on a Reel 1,6/0,8 red
Porovnat
Heat Shrinkable Tubing 2:1 on a Reel 1,6/0,8 red
HIS-PACK-1.6/0.8-PO-X-RD 300-30162
Porovnat
Přidat do sledovaných položek
1 pcs.
Red (RD) HIS-PACK-1.6/0.8-PO-X-RD 300-30162
Heat Shrinkable Tubing 2:1 on a Reel 2,4/1,2 blue
Porovnat
Heat Shrinkable Tubing 2:1 on a Reel 2,4/1,2 blue
HIS-PACK-2.4/1.2-PO-X-BU 300-30246
Porovnat
Přidat do sledovaných položek
1 pcs.
Blue (BU) HIS-PACK-2.4/1.2-PO-X-BU 300-30246
Heat Shrinkable Tubing 2:1 on a Reel 3,2/1,6 blue
Porovnat
Heat Shrinkable Tubing 2:1 on a Reel 3,2/1,6 blue
HIS-PACK-3.2/1.6-PO-X-BU 300-30326
Porovnat
Přidat do sledovaných položek
1 pcs.
Blue (BU) HIS-PACK-3.2/1.6-PO-X-BU 300-30326
Heat Shrinkable Tubing 2:1 on a Reel 4,8/2,4 blue
Porovnat
Heat Shrinkable Tubing 2:1 on a Reel 4,8/2,4 blue
HIS-PACK-4.8/2.4-PO-X-BU 300-30486
Porovnat
Přidat do sledovaných položek
1 pcs.
Blue (BU) HIS-PACK-4.8/2.4-PO-X-BU 300-30486
Heat Shrinkable Tubing 2:1 on a Reel 6,4/3,2 blue
Porovnat
Heat Shrinkable Tubing 2:1 on a Reel 6,4/3,2 blue
HIS-PACK-6.4/3.2-PO-X-BU 300-30646
Porovnat
Přidat do sledovaných položek
1 pcs.
Blue (BU) HIS-PACK-6.4/3.2-PO-X-BU 300-30646
Heat Shrinkable Tubing 2:1 on a Reel 9,5/4,7 blue
Porovnat
Heat Shrinkable Tubing 2:1 on a Reel 9,5/4,7 blue
HIS-PACK-9.5/4.7-PO-X-BU 300-30956
Porovnat
Přidat do sledovaných položek
1 pcs.
Blue (BU) HIS-PACK-9.5/4.7-PO-X-BU 300-30956
Heat Shrinkable Tubing 2:1 on a Reel 19,1/9,5 blue
Porovnat
Heat Shrinkable Tubing 2:1 on a Reel 19,1/9,5 blue
HIS-PACK-19.1/9.5-PO-X-BU 300-31906
Porovnat
Přidat do sledovaných položek
1 pcs.
Blue (BU) HIS-PACK-19.1/9.5-PO-X-BU 300-31906
Heat Shrinkable Tubing 2:1 on a Reel 25,4/12,7 blue
Porovnat
Heat Shrinkable Tubing 2:1 on a Reel 25,4/12,7 blue
HIS-PACK-25.4/12.7-PO-X-BU 300-32546
Porovnat
Přidat do sledovaných položek
1 pcs.
Blue (BU) HIS-PACK-25.4/12.7-PO-X-BU 300-32546
Heat Shrinkable Tubing 2:1 on a Reel 12,7/6,4 blue
Porovnat
Heat Shrinkable Tubing 2:1 on a Reel 12,7/6,4 blue
HIS-PACK-12.7/6.4-PO-X-BU 300-31276
Porovnat
Přidat do sledovaných položek
1 pcs.
Blue (BU) HIS-PACK-12.7/6.4-PO-X-BU 300-31276
Heat shrinkable tubing 2:1 (12.7/6.4 mm), self extinguishing, black, 100 m reel
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat shrinkable tubing 2:1 (12.7/6.4 mm), self extinguishing, black, 100 m reel
TCN20-12.7/6.4-PO-X-BK 300-73080
Porovnat
Přidat do sledovaných položek
100 metre
Black (BK) TCN20-12.7/6.4-PO-X-BK 300-73080
Heat Shrinkable Tubing with Adhesive Liner 3:1 on a Reel 12/4 transparent
Porovnat
Heat Shrinkable Tubing with Adhesive Liner 3:1 on a Reel 12/4 transparent
HIS-A-12/4-PO-X-CL 308-11203
Porovnat
Přidat do sledovaných položek
1 pcs.
Transparent (CL) HIS-A-12/4-PO-X-CL 308-11203
Heat Shrinkable Tubing Thin Wall with Adhesive Liner 3:1 L=1.2m 120/45 black
TA37 - adhesive lined tubing for safety sensitive areas.
Porovnat
Heat Shrinkable Tubing Thin Wall with Adhesive Liner 3:1 L=1.2m 120/45 black
TA37 120-45-PO-X-BK 315-13011
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) TA37 120-45-PO-X-BK 315-13011
Cable label, White/Transparent
Palm sized hand held self-laminating label dispenser RiteOn.
Porovnat
Cable label, White/Transparent
RO202-1401-CL/WH 550-14012
Porovnat
Přidat do sledovaných položek
150 pack
White (WH), Transparent (CL) RO202-1401-CL/WH 550-14012
Cable tie inside serrated, 290x3.5mm, ⌀1.5-80.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 290x3.5mm, ⌀1.5-80.0mm, black, 100pcs.
T30LL-PA66W-BK 111-03570
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T30LL-PA66W-BK 111-03570
Cable tie inside serrated, 390.0x4.6mm, ⌀1.5-110.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 390.0x4.6mm, ⌀1.5-110.0mm, black, 100pcs.
T50L-PA66HS-BK 111-05450
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T50L-PA66HS-BK 111-05450
Cable tie inside serrated, 305.0x4.7mm, ⌀1.5-85.0mm, black, 1000pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 305.0x4.7mm, ⌀1.5-85.0mm, black, 1000pcs.
T80I-PA66HS-BK 111-08280
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) T80I-PA66HS-BK 111-08280
Cable tie inside serrated, 205.0x4.7mm, ⌀1.5-55.0mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 205.0x4.7mm, ⌀1.5-55.0mm, natural, 100pcs.
T80R-PA66HS-NA 111-05059
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) T80R-PA66HS-NA 111-05059
Stainless steel cable tie, ball bearing lock, 685.0x4.6mm, ⌀17.0-203.0mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Porovnat
Stainless steel cable tie, ball bearing lock, 685.0x4.6mm, ⌀17.0-203.0mm, metal, 100pcs.
MBT27SS-SS304-ML 111-93278
Porovnat
Přidat do sledovaných položek
100 pcs.
Metal (ML) MBT27SS-SS304-ML 111-93278
Fixing tie for hole (round), inside serrated, ⌀1.5-45.0mm, natural, 100pcs.
Fixing tie with Arrowhead for round hole.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀1.5-45.0mm, natural, 100pcs.
T50RSFM-PA66-NA 111-85729
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) T50RSFM-PA66-NA 111-85729
Fixing tie for hole (round), inside serrated, ⌀1.5-27.0mm, natural, 1000pcs.
Fixing tie for round holes with arrowhead and audibly clicks into place when applied.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀1.5-27.0mm, natural, 1000pcs.
T50SSL5-PA66-NA 111-85339
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) T50SSL5-PA66-NA 111-85339
Fixing tie for stud, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
Cable ties with various weld stud fixing methods.
Porovnat
Fixing tie for stud, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
T50ROSSBH5SD-PA66HS-BK 156-05905
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROSSBH5SD-PA66HS-BK 156-05905
Fixing tie for stud, inside serrated, ⌀1.5-80.0mm, black, 500pcs.
Cable ties with various weld stud fixing methods.
Porovnat
Fixing tie for stud, inside serrated, ⌀1.5-80.0mm, black, 500pcs.
T80ISBS5-PA66HS-BK 150-21297
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T80ISBS5-PA66HS-BK 150-21297
RFID cable tie, durable/UV resistant, 869 MHz (UHF), 201x7.9mm, ⌀17.0-50.0mm, red, 50pcs.
MBTRFID – stainless steel RFID cable ties for product identification in harsh environments.
Porovnat
RFID cable tie, durable/UV resistant, 869 MHz (UHF), 201x7.9mm, ⌀17.0-50.0mm, red, 50pcs.
MBT8HHFRFID-SS316/SP-RD 156-01565
Porovnat
Přidat do sledovaných položek
50 pcs.
Red (RD) MBT8HHFRFID-SS316/SP-RD 156-01565
RFID cable tie, durable/UV resistant, 869 MHz (UHF), 362x7.9mm, ⌀17.0-102mm, red, 50pcs.
MBTRFID – stainless steel RFID cable ties for product identification in harsh environments.
Porovnat
RFID cable tie, durable/UV resistant, 869 MHz (UHF), 362x7.9mm, ⌀17.0-102mm, red, 50pcs.
MBT14HHFRFID-SS316/SP-RD 156-01566
Porovnat
Přidat do sledovaných položek
50 pcs.
Red (RD) MBT14HHFRFID-SS316/SP-RD 156-01566
RFID cable tie, durable/UV resistant, 869 MHz (UHF), 521x7.9mm, ⌀17.0-152mm, red, 50pcs.
MBTRFID – stainless steel RFID cable ties for product identification in harsh environments.
Porovnat
RFID cable tie, durable/UV resistant, 869 MHz (UHF), 521x7.9mm, ⌀17.0-152mm, red, 50pcs.
MBT20HHFRFID-SS316/SP-RD 156-01567
Porovnat
Přidat do sledovaných položek
50 pcs.
Red (RD) MBT20HHFRFID-SS316/SP-RD 156-01567
Facebook  Instagram  Twitter  YouTube  LinkedIn  Corporate Blog 
Kontakt VOP Impressum Mapa stránek Newsletter Pokyny a závazky Zásady ochrany osobních údajů
Aktualizace: 14/12/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.292.5) | Aktualizace: 14/12/2025 | Nastavení ochrany osobních údajů
Hledat prodejce Kontakt