Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
11/10/2025

Výsledky pro "wind energy sector"

Nalezeno 2 940 výrobků 2 dalších položek
K dispozici jsou výsledky v následujících kategoriích:
Cable Ties and Fixings

Cable Ties and Fixings  (1022)

Cable Ties Inside Serrated  (299) Cable Ties Outside Serrated  (34) Cable Ties Without Serration  (26) Cable Ties, Releasable  (49) Cable Ties, Stainless Steel  (75) Cable Ties With Fixing Elements  (123) Cable Tie Mounts  (120) Fixing Elements  (37) Clips, Clamps and Plugs  (283)
Cable Ties and Fixings
Cable Ties and Fixings (1022)
Insulation

Insulation  (325)

Heat Shrink Tubing  (321) Heat Shrinkable Moulded Shapes  (5)
Insulation
Insulation (325)
Cable Protection Systems

Cable Protection Systems  (180)

Non-Metallic Conduit Systems  (7) Metallic Conduit Systems  (75) Conduit System Accessories  (12) Protective Tubing and Spiral Binding  (76) Expandable Braided Sleeves  (2) Open Woven Sleeves  (8) Edge Protection  (1) Wiring Ducts and Accessories  (2)
Cable Protection Systems
Cable Protection Systems (180)
Electrical Installation

Electrical Installation  (271)

Electrical Tapes  (91) Cast Resin Technology  (82) Gel Technology  (2) Cable Entry Systems  (96)
Electrical Installation
Electrical Installation (271)
Identification Systems

Identification Systems  (1024)

Wire and Cable Markers  (734) Control Panel Labelling  (127) Industrial Identification  (227) RFID tags and cable ties  (56) Security Labeling  (13) Hazardous Area Identification  (10) Printers and Software  (23)
Identification Systems
Identification Systems (1024)
Application Tooling

Application Tooling  (55)

Automatic Cable Tying System  (24) Application Tooling for Cable Ties  (22) Application Tooling for Snappers  (2) Application Tooling for Heat Shrinkable Tubing  (4) Application Tooling for Non Shrinkable Tubing  (2) Application Tooling for Braided Sleeves  (1)
Application Tooling
Application Tooling (55)
Connectivity

Connectivity  (63)

Cable  (63)
Connectivity
Connectivity (63)
2 940 produkty
Resetovat vše
Cable marker, to identify: wire and cable/for snapping, inkjet print "1", ⌀4.30-5.30mm, yellow, box=500pcs.
WIC - pre-printed cable markers.
Porovnat
Cable marker, to identify: wire and cable/for snapping, inkjet print "1", ⌀4.30-5.30mm, yellow, box=500pcs.
WIC3-1-PA66-YE 561-03614
Porovnat
Přidat do sledovaných položek
500 pcs.
Yellow (YE) WIC3-1-PA66-YE 561-03614
Cable marker, to identify: wire and cable/for snapping, inkjet print "2", ⌀4.30-5.30mm, red, box=500pcs.
WIC - pre-printed cable markers.
Porovnat
Cable marker, to identify: wire and cable/for snapping, inkjet print "2", ⌀4.30-5.30mm, red, box=500pcs.
WIC3-2-PA66-RD 561-03622
Porovnat
Přidat do sledovaných položek
500 pcs.
Red (RD) WIC3-2-PA66-RD 561-03622
Cable marker, to identify: wire and cable/for snapping, inkjet print "2", ⌀4.30-5.30mm, yellow, box=500pcs.
WIC - pre-printed cable markers.
Porovnat
Cable marker, to identify: wire and cable/for snapping, inkjet print "2", ⌀4.30-5.30mm, yellow, box=500pcs.
WIC3-2-PA66-YE 561-03624
Porovnat
Přidat do sledovaných položek
500 pcs.
Yellow (YE) WIC3-2-PA66-YE 561-03624
Cable marker, to identify: wire and cable/for snapping, inkjet print "3", ⌀4.30-5.30mm, yellow, box=500pcs.
WIC - pre-printed cable markers.
Porovnat
Cable marker, to identify: wire and cable/for snapping, inkjet print "3", ⌀4.30-5.30mm, yellow, box=500pcs.
WIC3-3-PA66-YE 561-03634
Porovnat
Přidat do sledovaných položek
500 pcs.
Yellow (YE) WIC3-3-PA66-YE 561-03634
Cable marker, to identify: wire and cable/for snapping, inkjet print "4", ⌀4.30-5.30mm, yellow, box=500pcs.
WIC - pre-printed cable markers.
Porovnat
Cable marker, to identify: wire and cable/for snapping, inkjet print "4", ⌀4.30-5.30mm, yellow, box=500pcs.
WIC3-4-PA66-YE 561-03644
Porovnat
Přidat do sledovaných položek
500 pcs.
Yellow (YE) WIC3-4-PA66-YE 561-03644
Cable marker, to identify: wire and cable/for snapping, inkjet print "5", ⌀4.30-5.30mm, yellow, box=500pcs.
WIC - pre-printed cable markers.
Porovnat
Cable marker, to identify: wire and cable/for snapping, inkjet print "5", ⌀4.30-5.30mm, yellow, box=500pcs.
WIC3-5-PA66-YE 561-03654
Porovnat
Přidat do sledovaných položek
500 pcs.
Yellow (YE) WIC3-5-PA66-YE 561-03654
Cable marker, to identify: wire and cable/for snapping, inkjet print "6", ⌀4.30-5.30mm, yellow, box=500pcs.
WIC - pre-printed cable markers.
Porovnat
Cable marker, to identify: wire and cable/for snapping, inkjet print "6", ⌀4.30-5.30mm, yellow, box=500pcs.
WIC3-6-PA66-YE 561-03664
Porovnat
Přidat do sledovaných položek
500 pcs.
Yellow (YE) WIC3-6-PA66-YE 561-03664
Cable marker, to identify: wire and cable/for snapping, inkjet print "7", ⌀4.30-5.30mm, yellow, box=500pcs.
WIC - pre-printed cable markers.
Porovnat
Cable marker, to identify: wire and cable/for snapping, inkjet print "7", ⌀4.30-5.30mm, yellow, box=500pcs.
WIC3-7-PA66-YE 561-03674
Porovnat
Přidat do sledovaných položek
500 pcs.
Yellow (YE) WIC3-7-PA66-YE 561-03674
Cable marker, to identify: wire and cable/for snapping, inkjet print "8", ⌀4.30-5.30mm, yellow, box=500pcs.
WIC - pre-printed cable markers.
Porovnat
Cable marker, to identify: wire and cable/for snapping, inkjet print "8", ⌀4.30-5.30mm, yellow, box=500pcs.
WIC3-8-PA66-YE 561-03684
Porovnat
Přidat do sledovaných položek
500 pcs.
Yellow (YE) WIC3-8-PA66-YE 561-03684
Cable marker, to identify: wire and cable/for snapping, inkjet print "9", ⌀4.30-5.30mm, yellow, box=500pcs.
WIC - pre-printed cable markers.
Porovnat
Cable marker, to identify: wire and cable/for snapping, inkjet print "9", ⌀4.30-5.30mm, yellow, box=500pcs.
WIC3-9-PA66-YE 561-03694
Porovnat
Přidat do sledovaných položek
500 pcs.
Yellow (YE) WIC3-9-PA66-YE 561-03694
Cable marker, to identify: wire and cable/for snapping, inkjet print "A,E,L,N,R,S,T,+,-,⏚", ⌀4.30-5.30mm, yellow, box=500pcs.
WIC - pre-printed cable markers.
Porovnat
Cable marker, to identify: wire and cable/for snapping, inkjet print "A,E,L,N,R,S,T,+,-,⏚", ⌀4.30-5.30mm, yellow, box=500pcs.
WIC3-A,E,L,N,R,S,T,+,-,Earth-PA66-YE 561-03994
Porovnat
Přidat do sledovaných položek
500 pcs.
Yellow (YE) WIC3-A,E,L,N,R,S,T,+,-,Earth-PA66-YE 561-03994
Cable marker, to identify: wire and cable/for snapping, inkjet print "G,H,Y,Z,O,Q,J,K,X,L", ⌀4.30-5.30mm, yellow, box=500pcs.
WIC - pre-printed cable markers.
Porovnat
Cable marker, to identify: wire and cable/for snapping, inkjet print "G,H,Y,Z,O,Q,J,K,X,L", ⌀4.30-5.30mm, yellow, box=500pcs.
WIC3-G,H,Y,Z,O,Q,J,K,X,L-PA66-YE 561-03003
Porovnat
Přidat do sledovaných položek
500 pcs.
Yellow (YE) WIC3-G,H,Y,Z,O,Q,J,K,X,L-PA66-YE 561-03003
Cable marker, to identify: wire and cable/for snapping, inkjet print "G,H,Y,Z,O,Q,J,K,X,L", ⌀0.80-2.20mm, yellow, box=1000pcs.
WIC - pre-printed cable markers.
Porovnat
Cable marker, to identify: wire and cable/for snapping, inkjet print "G,H,Y,Z,O,Q,J,K,X,L", ⌀0.80-2.20mm, yellow, box=1000pcs.
WIC0-G,H,Y,Z,O,Q,J,K,X,L-PA66-YE 561-00003
Porovnat
Přidat do sledovaných položek
1000 pcs.
Yellow (YE) WIC0-G,H,Y,Z,O,Q,J,K,X,L-PA66-YE 561-00003
Cable marker, to identify: wire and cable/for snapping, inkjet print "B,C,U,V,W,P,D,F,I,M", ⌀0.80-2.20mm, yellow, box=1000pcs.
WIC - pre-printed cable markers.
Porovnat
Cable marker, to identify: wire and cable/for snapping, inkjet print "B,C,U,V,W,P,D,F,I,M", ⌀0.80-2.20mm, yellow, box=1000pcs.
WIC0-B,C,U,V,W,P,D,F,I,M-PA66-YE 561-00005
Porovnat
Přidat do sledovaných položek
1000 pcs.
Yellow (YE) WIC0-B,C,U,V,W,P,D,F,I,M-PA66-YE 561-00005
Stainless steel embossing machine, 558x480x355mm
A quiet, durable, and easy to use metal plate embossing printer.
Porovnat
Stainless steel embossing machine, 558x480x355mm
M-BOSS Compact-MET-BU/WH 544-20000
Porovnat
Přidat do sledovaných položek
1 pcs.
Blue (BU), White (WH) M-BOSS Compact-MET-BU/WH 544-20000
Fixing tie for hole (round), inside serrated, ⌀5.0-50.0mm, black, 500pcs.
2-piece fixing tie for round holes with fir tree.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀5.0-50.0mm, black, 500pcs.
T30LFT6LG-PA66HS/PA66HIRHS-BK 150-31097
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T30LFT6LG-PA66HS/PA66HIRHS-BK 150-31097
Fixing tie for stud, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
Fixing tie for stud fixation and for multipile routing.
Porovnat
Fixing tie for stud, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
T50SDSBS5-PA66HS/PA66HIRHS-BK 150-56193
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SDSBS5-PA66HS/PA66HIRHS-BK 150-56193
Cable tag, continuous, thermal transfer print, 65.0x15.0mm, blue, reel=190pcs.
TIPTAG PU – printed mark has a tattoo-like permanency.
Porovnat
Cable tag, continuous, thermal transfer print, 65.0x15.0mm, blue, reel=190pcs.
TTAGPU15X65BU-PUR-BU 556-25016
Porovnat
Přidat do sledovaných položek
190 reel
Blue (BU) TTAGPU15X65BU-PUR-BU 556-25016
Fixing tie for screw fixation, inside serrated, ⌀1.5-20.0mm, natural, 100pcs.
Screw mount style creates low insertion and high extraction force.
Porovnat
Fixing tie for screw fixation, inside serrated, ⌀1.5-20.0mm, natural, 100pcs.
T18MR-PA66-NA 113-01819
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) T18MR-PA66-NA 113-01819
Fixing tie for hole (round), inside serrated, ⌀1.5-31.0mm, black, 500pcs.
The flexible 'discs' adjusts to take up variations in panel thickness - ensuring a firm fixing at all times.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀1.5-31.0mm, black, 500pcs.
T50SD6-PA66HS-BK 111-85350
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SD6-PA66HS-BK 111-85350
Fixing tie for hole (round), inside serrated, ⌀1.5-31.0mm, natural, 1000pcs.
The flexible 'discs' adjusts to take up variations in panel thickness - ensuring a firm fixing at all times.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀1.5-31.0mm, natural, 1000pcs.
T50SST5-PA66-NA 126-02300
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) T50SST5-PA66-NA 126-02300
Fixing tie for hole (round), outside serrated, ⌀1.5-30.0mm, black, 3500pcs.
Porovnat
Fixing tie for hole (round), outside serrated, ⌀1.5-30.0mm, black, 3500pcs.
T50SOSSFT6.5E-MDL-PA66HS-BK 156-00264
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SOSSFT6.5E-MDL-PA66HS-BK 156-00264
Fixing tie for hole (round), inside serrated, ⌀1.5-27.0mm, black, 500pcs.
Wing design helps stabilize the cable tie in high vibration applications.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀1.5-27.0mm, black, 500pcs.
T50SSL5-PA66HS-BK 126-02204
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SSL5-PA66HS-BK 126-02204
Cable tie inside serrated, 200x4.6mm, ⌀1.5-50.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 200x4.6mm, ⌀1.5-50.0mm, black, 100pcs.
T50R-PA66HS-BK 111-04950
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T50R-PA66HS-BK 111-04950
Cable tie inside serrated, 305.0x4.7mm, ⌀1.5-85mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 305.0x4.7mm, ⌀1.5-85mm, natural, 100pcs.
T80I-PA66-NA 111-08229
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) T80I-PA66-NA 111-08229
Cable tie inside serrated, 387x7.6mm, ⌀3.0-100mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 387x7.6mm, ⌀3.0-100mm, black, 100pcs.
T120R(E)-PA66W-BK 111-12060
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T120R(E)-PA66W-BK 111-12060
Cable tie inside serrated, 365x7.6mm, ⌀5.0-100.0mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 365x7.6mm, ⌀5.0-100.0mm, natural, 100pcs.
T150R-PA66-NA 111-14819
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) T150R-PA66-NA 111-14819
P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, natural, 1000pcs.
H1P-PA66-NA 211-60019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) H1P-PA66-NA 211-60019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 1000pcs.
H5P-PA66-NA 211-60059
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) H5P-PA66-NA 211-60059
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, natural, 1000pcs.
H6P-PA66-NA 211-60069
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) H6P-PA66-NA 211-60069
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 145.0x2.5mm, ⌀1.5-35.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 145.0x2.5mm, ⌀1.5-35.0mm, black, 100pcs.
T18I-PA66W-BK 111-02360
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T18I-PA66W-BK 111-02360
Cable label, self laminating, Starter pack, self-laminating/chemical resistance, white/transparent, manual marking, 12.70x19.05mm, H2=50.80mm, 150pcs.
The RiteOn starter pack gets you started right away.
Porovnat
Cable label, self laminating, Starter pack, self-laminating/chemical resistance, white/transparent, manual marking, 12.70x19.05mm, H2=50.80mm, 150pcs.
SPRO200-1401-CL/WH 550-14010
Porovnat
Přidat do sledovaných položek
1 pack
White (WH), Transparent (CL) SPRO200-1401-CL/WH 550-14010
Stainless steel cable tie, ball bearing lock, 521.0x4.6mm, ⌀17.0-152.0mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Porovnat
Stainless steel cable tie, ball bearing lock, 521.0x4.6mm, ⌀17.0-152.0mm, metal, 100pcs.
MBT20SS-SS304-ML 111-93208
Porovnat
Přidat do sledovaných položek
100 pcs.
Metal (ML) MBT20SS-SS304-ML 111-93208
Stainless steel cable tie, ball bearing lock, 201.0x7.9mm, ⌀17.0-50.0mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Porovnat
Stainless steel cable tie, ball bearing lock, 201.0x7.9mm, ⌀17.0-50.0mm, metal, 50pcs.
MBT8HS-SS304-ML 111-94088
Porovnat
Přidat do sledovaných položek
50 pcs.
Metal (ML) MBT8HS-SS304-ML 111-94088
Stainless steel cable tie, ball bearing lock, 362.0x7.9mm, ⌀12.0-102.0mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Porovnat
Stainless steel cable tie, ball bearing lock, 362.0x7.9mm, ⌀12.0-102.0mm, metal, 50pcs.
MBT14H-SS316L-ML 111-94149
Porovnat
Přidat do sledovaných položek
50 pcs.
Metal (ML) MBT14H-SS316L-ML 111-94149
Stainless steel cable tie, ball bearing lock, 127.0x4.6mm, ⌀12.0-25.0mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Porovnat
Stainless steel cable tie, ball bearing lock, 127.0x4.6mm, ⌀12.0-25.0mm, metal, 100pcs.
MBT5S-SS316L-ML 111-93059
Porovnat
Přidat do sledovaných položek
100 pcs.
Metal (ML) MBT5S-SS316L-ML 111-93059
Automatic cable tie tool Dmax=100.0mm, for 4.5mm, 2.443kg, blue
The automatic bundling tool ATS flex with different jaw sizes.
Porovnat
Automatic cable tie tool Dmax=100.0mm, for 4.5mm, 2.443kg, blue
ATS_flex-MET-BU 102-60000
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
1 pcs.
Blue (BU) ATS_flex-MET-BU 102-60000
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Heat Shrinkable Tubing 3.5:1 Thick Wall Adhesive Lined length 1m 13/4 black
HA47 - Halogenfree 4:1 Heavy Dual Wall Heat Shrink Tubing.
Porovnat
Heat Shrinkable Tubing 3.5:1 Thick Wall Adhesive Lined length 1m 13/4 black
HA47-13/4-PO-X-BK 321-20130
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HA47-13/4-PO-X-BK 321-20130
Heat Shrinkable Tubing 3.5:1 Thick Wall Adhesive Lined length 1m 19/6 black
HA47 - Halogenfree 4:1 Heavy Dual Wall Heat Shrink Tubing.
Porovnat
Heat Shrinkable Tubing 3.5:1 Thick Wall Adhesive Lined length 1m 19/6 black
HA47-19/6-PO-X-BK 321-20180
Porovnat
Přidat do sledovaných položek
20 pcs.
Black (BK) HA47-19/6-PO-X-BK 321-20180
Heat Shrinkable Tubing 3.5:1 Thick Wall Adhesive Lined length 1m 45/12 black
HA47 - Halogenfree 4:1 Heavy Dual Wall Heat Shrink Tubing.
Porovnat
Heat Shrinkable Tubing 3.5:1 Thick Wall Adhesive Lined length 1m 45/12 black
HA47-45/12-PO-X-BK 321-20450
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HA47-45/12-PO-X-BK 321-20450
Heat Shrinkable Tubing 3.5:1 Thick Wall Adhesive Lined length 1m 51/16 black
HA47 - Halogenfree 4:1 Heavy Dual Wall Heat Shrink Tubing.
Porovnat
Heat Shrinkable Tubing 3.5:1 Thick Wall Adhesive Lined length 1m 51/16 black
HA47-51/16-PO-X-BK 321-20510
Porovnat
Přidat do sledovaných položek
8 pcs.
Black (BK) HA47-51/16-PO-X-BK 321-20510
Corrugated tubing, for faster processing, nom⌀53.3mm, OD=53.3mm, ID=44.0mm, black, 25m
HelaGuard HG-DC double slit conduit.
Porovnat
Corrugated tubing, for faster processing, nom⌀53.3mm, OD=53.3mm, ID=44.0mm, black, 25m
HG-DC54-PA6-BK 166-11807
Porovnat
Přidat do sledovaných položek
25 metre
Black (BK) HG-DC54-PA6-BK 166-11807
Cable tie mount for screw fixation, Wmax=2.6mm, ⌀2.9 mm, M4 Screw, natural, 100pcs.
Simple to install with a screw or rivet.
Porovnat
Cable tie mount for screw fixation, Wmax=2.6mm, ⌀2.9 mm, M4 Screw, natural, 100pcs.
MB1-PA66-NA 151-00857
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) MB1-PA66-NA 151-00857
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀5.0 mm, M4 Screw, natural, 100pcs.
Screw fix cable tie mounts MB1.
Porovnat
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀5.0 mm, M4 Screw, natural, 100pcs.
MB2-PA66-NA 151-00858
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) MB2-PA66-NA 151-00858
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀5.0 mm, M4 Screw, black, 100pcs.
Screw fix cable tie mounts MB1.
Porovnat
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀5.0 mm, M4 Screw, black, 100pcs.
MB2-PA66-BK 151-00862
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) MB2-PA66-BK 151-00862
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀5.6 mm, 180°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀5.6 mm, 180°, black, 280pcs.
RCBHANGER-PA66HIRHSUV/ZN-BK 151-02875
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCBHANGER-PA66HIRHSUV/ZN-BK 151-02875
Heat Shrinkable Tubing 2:1 flexible1,6/,08 black
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Porovnat
Heat Shrinkable Tubing 2:1 flexible1,6/,08 black
TF21-1.6/0.8-PO-X-BK 309-10160
Porovnat
Přidat do sledovaných položek
300 metre
Black (BK) TF21-1.6/0.8-PO-X-BK 309-10160
Heat Shrinkable Tubing 2:1 flexible2,4/1,2 black
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Porovnat
Heat Shrinkable Tubing 2:1 flexible2,4/1,2 black
TF21-2.4/1.2-PO-X-BK 309-10240
Porovnat
Přidat do sledovaných položek
300 metre
Black (BK) TF21-2.4/1.2-PO-X-BK 309-10240
Heat Shrinkable Tubing 2:1 black 19,1/9,5
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Porovnat
Heat Shrinkable Tubing 2:1 black 19,1/9,5
TF21-19.1/9.5-PO-X-BK 309-11900
Porovnat
Přidat do sledovaných položek
50 metre
Black (BK) TF21-19.1/9.5-PO-X-BK 309-11900
Heat Shrinkable Tubing 2:1 flexible25.4/12.7 black
Polyolefin heat shrink tubing resists most common oils, chemicals and fluids.
Porovnat
Heat Shrinkable Tubing 2:1 flexible25.4/12.7 black
TF21-25.4/12.7-PO-X-BK 309-12540
Porovnat
Přidat do sledovaných položek
50 metre
Black (BK) TF21-25.4/12.7-PO-X-BK 309-12540
Cable marker, to identify: wire and cable/for snapping, inkjet print "0-9", ⌀2.00-2.80mm, yellow, box=1000pcs.
WIC - pre-printed cable markers.
Porovnat
Cable marker, to identify: wire and cable/for snapping, inkjet print "0-9", ⌀2.00-2.80mm, yellow, box=1000pcs.
WIC1-0-9-PA66-YE 561-01101
Porovnat
Přidat do sledovaných položek
1000 pcs.
Yellow (YE) WIC1-0-9-PA66-YE 561-01101
Cable marker, to identify: wire and cable/for snapping, inkjet print "1", ⌀2.00-2.80mm, yellow, box=1000pcs.
WIC - pre-printed cable markers.
Porovnat
Cable marker, to identify: wire and cable/for snapping, inkjet print "1", ⌀2.00-2.80mm, yellow, box=1000pcs.
WIC1-1-PA66-YE 561-01614
Porovnat
Přidat do sledovaných položek
1000 pcs.
Yellow (YE) WIC1-1-PA66-YE 561-01614
Cable marker, to identify: wire and cable/for snapping, inkjet print "4", ⌀2.00-2.80mm, yellow, box=1000pcs.
WIC - pre-printed cable markers.
Porovnat
Cable marker, to identify: wire and cable/for snapping, inkjet print "4", ⌀2.00-2.80mm, yellow, box=1000pcs.
WIC1-4-PA66-YE 561-01644
Porovnat
Přidat do sledovaných položek
1000 pcs.
Yellow (YE) WIC1-4-PA66-YE 561-01644
Cable marker, to identify: wire and cable/for snapping, inkjet print "A,E,L,N,R,S,T,+,-,⏚", ⌀2.00-2.80mm, yellow, box=1000pcs.
WIC - pre-printed cable markers.
Porovnat
Cable marker, to identify: wire and cable/for snapping, inkjet print "A,E,L,N,R,S,T,+,-,⏚", ⌀2.00-2.80mm, yellow, box=1000pcs.
WIC1-A,E,L,N,R,S,T,+,-,Earth-PA66-YE 561-01994
Porovnat
Přidat do sledovaných položek
1000 pcs.
Yellow (YE) WIC1-A,E,L,N,R,S,T,+,-,Earth-PA66-YE 561-01994
Cable marker, to identify: wire and cable/for snapping, inkjet print "4", ⌀2.80-3.80mm, yellow, box=1000pcs.
WIC - pre-printed cable markers.
Porovnat
Cable marker, to identify: wire and cable/for snapping, inkjet print "4", ⌀2.80-3.80mm, yellow, box=1000pcs.
WIC2-4-PA66-YE 561-02644
Porovnat
Přidat do sledovaných položek
1000 pcs.
Yellow (YE) WIC2-4-PA66-YE 561-02644
Cable tie mount for adhesive use, Wmax=4.0mm, ⌀2.2 mm, natural, 100pcs.
TY3G1 TY3G1S Natural Screw Fixing Cable Tie Mount
Porovnat
Cable tie mount for adhesive use, Wmax=4.0mm, ⌀2.2 mm, natural, 100pcs.
TY3G1S-PA66-NA 151-11319
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) TY3G1S-PA66-NA 151-11319
Cable tie mount for screw fixation, Wmax=6.0mm, ⌀4.5 mm, M4 Screw, natural, 100pcs.
KR6G5 Srew Fixing Mounts with curved design
Porovnat
Cable tie mount for screw fixation, Wmax=6.0mm, ⌀4.5 mm, M4 Screw, natural, 100pcs.
KR6G5-PA66-NA 151-24619
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) KR6G5-PA66-NA 151-24619
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, natural, 100pcs.
KR8G5 Srew Fixing Mounts with curved design
Porovnat
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, natural, 100pcs.
KR8G5-PA66-NA 151-24819
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) KR8G5-PA66-NA 151-24819
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie outside serrated, 145.0x3.4mm, ⌀4.0-35.0mm, beige, 100pcs.
PT2A PEEK cable tie for extreme temperature range for excellent performance in a range of environments.
Porovnat
Cable tie outside serrated, 145.0x3.4mm, ⌀4.0-35.0mm, beige, 100pcs.
PT2A-PEEK-BGE 118-00032
Porovnat
Přidat do sledovaných položek
100 pcs.
Beige (BGE) PT2A-PEEK-BGE 118-00032
Cable tag, continuous, thermal transfer print, 100.0x15.0mm, yellow, reel=125pcs.
TIPTAG PU – printed mark has a tattoo-like permanency.
Porovnat
Cable tag, continuous, thermal transfer print, 100.0x15.0mm, yellow, reel=125pcs.
TTAGPU15X100YE-PUR-YE 556-25010
Porovnat
Přidat do sledovaných položek
125 reel
Yellow (YE) TTAGPU15X100YE-PUR-YE 556-25010
Cable tag, continuous, thermal transfer print, 100.0x15.0mm, white, reel=125pcs.
TIPTAG PU – printed mark has a tattoo-like permanency.
Porovnat
Cable tag, continuous, thermal transfer print, 100.0x15.0mm, white, reel=125pcs.
TTAGPU15X100WH-PUR-WH 556-25006
Porovnat
Přidat do sledovaných položek
125 reel
White (WH) TTAGPU15X100WH-PUR-WH 556-25006
Fixing tie for stud, inside serrated, ⌀4.0-35.0mm, black, 500pcs.
Mount can be used in a wide variety of applications where 5mm weld studs or 5mm ISO bolts.
Porovnat
Fixing tie for stud, inside serrated, ⌀4.0-35.0mm, black, 500pcs.
T50SSBS5OT-E-PA66HS-BK 155-30602
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SSBS5OT-E-PA66HS-BK 155-30602
Fixing tie for hole (round), inside serrated, ⌀1.5-45.0mm, black, 500pcs.
Wing design helps stabilize the tie in high vibration applications.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀1.5-45.0mm, black, 500pcs.
T50RSFM-PA66HS-BK 111-85720
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50RSFM-PA66HS-BK 111-85720
Cable tie inside serrated, 150x3.5mm, ⌀1.5-35.0mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 150x3.5mm, ⌀1.5-35.0mm, natural, 100pcs.
T30R-PA66HS-NA 111-03259
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) T30R-PA66HS-NA 111-03259
Cable tie inside serrated, 210x4.7mm, ⌀1.5-55.0mm, black, 1000pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 210x4.7mm, ⌀1.5-55.0mm, black, 1000pcs.
T80R-PA66HS-BK 117-08070
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) T80R-PA66HS-BK 117-08070
Fixing tie for hole (round), inside serrated, ⌀50.0mm, black, 1000pcs.
1-Piece Fixing Tie with Arrowhead.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀50.0mm, black, 1000pcs.
T80RSF6.5F-PA66HS-BK 126-02600
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) T80RSF6.5F-PA66HS-BK 126-02600
Fixing tie for stud, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable ties with various weld stud fixing methods.
Porovnat
Fixing tie for stud, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSSBS5-PA66HS-BK 150-21299
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROSSBS5-PA66HS-BK 150-21299
Fixing tie for stud, inside serrated, ⌀2.0-35.0mm, black, 300pcs.
Cable ties with various weld stud fixing methods.
Porovnat
Fixing tie for stud, inside serrated, ⌀2.0-35.0mm, black, 300pcs.
T50SSBS5-PA66HS-BK 150-21293
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) T50SSBS5-PA66HS-BK 150-21293
Automatic cable tie tool Dmax=20mm, for 2.5mm, 1.813kg, blue
Autotool CPK hybrid T18RA
Porovnat
Automatic cable tie tool Dmax=20mm, for 2.5mm, 1.813kg, blue
Autotool_CPK_hybrid-MET/PL-BU 106-60000
Porovnat
Přidat do sledovaných položek
1 pcs.
Dark Blue (DKBU) Autotool_CPK_hybrid-MET/PL-BU 106-60000
Automatic cable tie tool Dmax=20mm, for 2.5mm, 3.184kg, blue
Automated cable tie gun CPK hybrid - battery option.
Porovnat
Automatic cable tie tool Dmax=20mm, for 2.5mm, 3.184kg, blue
Autotool_CPK_hybrid_Battery_Set-PL/MET-BU 106-66000
Porovnat
Přidat do sledovaných položek
1 pcs.
Dark Blue (DKBU) Autotool_CPK_hybrid_Battery_Set-PL/MET-BU 106-66000
Cable tie inside serrated, 760.0x7.6mm, ⌀5.0-225mm, black, 50pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 760.0x7.6mm, ⌀5.0-225mm, black, 50pcs.
T120L-PA66W-BK 111-12430
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) T120L-PA66W-BK 111-12430
Cable tie inside serrated, 198x3.5mm, ⌀1.5-50mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 198x3.5mm, ⌀1.5-50mm, natural, 100pcs.
T30L-PA66-NA 111-03419
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) T30L-PA66-NA 111-03419
Cable tie inside serrated, 198x3.5mm, ⌀1.5-50mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 198x3.5mm, ⌀1.5-50mm, black, 100pcs.
T30L-PA66W-BK 111-03460
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T30L-PA66W-BK 111-03460
Cable tie inside serrated, 150x3.5mm, ⌀1.5-35.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 150x3.5mm, ⌀1.5-35.0mm, black, 100pcs.
T30R-PA66-BK 111-03210
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T30R-PA66-BK 111-03210
Stainless steel cable tie, ball bearing lock, 362.0x7.9mm, ⌀17.0-102.0mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Porovnat
Stainless steel cable tie, ball bearing lock, 362.0x7.9mm, ⌀17.0-102.0mm, metal, 50pcs.
MBT14HS-SS304-ML 111-94148
Porovnat
Přidat do sledovaných položek
50 pcs.
Metal (ML) MBT14HS-SS304-ML 111-94148
Stainless steel cable tie, ball bearing lock, 127.0x4.6mm, ⌀12.0-25.0mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Porovnat
Stainless steel cable tie, ball bearing lock, 127.0x4.6mm, ⌀12.0-25.0mm, metal, 100pcs.
MBT5SS-SS304-ML 111-93058
Porovnat
Přidat do sledovaných položek
100 pcs.
Metal (ML) MBT5SS-SS304-ML 111-93058
Stainless steel cable tie, ball bearing lock, 362.0x4.6mm, ⌀12.0-102.0mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Porovnat
Stainless steel cable tie, ball bearing lock, 362.0x4.6mm, ⌀12.0-102.0mm, metal, 100pcs.
MBT14S-SS316L-ML 111-93149
Porovnat
Přidat do sledovaných položek
100 pcs.
Metal (ML) MBT14S-SS316L-ML 111-93149
Stainless steel cable tie, ball bearing lock, 201.0x4.6mm, ⌀12.0-50.0mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Porovnat
Stainless steel cable tie, ball bearing lock, 201.0x4.6mm, ⌀12.0-50.0mm, metal, 100pcs.
MBT8S-SS316L-ML 111-93089
Porovnat
Přidat do sledovaných položek
100 pcs.
Metal (ML) MBT8S-SS316L-ML 111-93089
Heat Shrinkable Tubing 4:1 Medium Wall Adhesive Lined length 1m 140/42 black
MA47 - Halogenfree 4:1 Medium Dual Wall Heat Shrink Tubing.
Porovnat
Heat Shrinkable Tubing 4:1 Medium Wall Adhesive Lined length 1m 140/42 black
MA47-140/42-PO-X-BK 323-21400
Porovnat
Přidat do sledovaných položek
3 pcs.
Black (BK) MA47-140/42-PO-X-BK 323-21400
Heat Shrinkable Tubing 3:1 on a Reel 1.5/0.5 black
Porovnat
Heat Shrinkable Tubing 3:1 on a Reel 1.5/0.5 black
HIS-3-1.5/0.5-PO-X-BK 308-30150
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) HIS-3-1.5/0.5-PO-X-BK 308-30150
Heat Shrinkable Tubing 3:1 on a Reel 12/4 black
Porovnat
Heat Shrinkable Tubing 3:1 on a Reel 12/4 black
HIS-3-12/4-PO-X-BK 308-31200
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) HIS-3-12/4-PO-X-BK 308-31200
Heat Shrinkable Tubing 3:1 on a Reel 18/6 black
Porovnat
Heat Shrinkable Tubing 3:1 on a Reel 18/6 black
HIS-3-18/6-PO-X-BK 308-31800
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) HIS-3-18/6-PO-X-BK 308-31800
Heat Shrinkable Tubing 2:1 on a Reel 1,6/0,8 red
Porovnat
Heat Shrinkable Tubing 2:1 on a Reel 1,6/0,8 red
HIS-PACK-1.6/0.8-PO-X-RD 300-30162
Porovnat
Přidat do sledovaných položek
1 pcs.
Red (RD) HIS-PACK-1.6/0.8-PO-X-RD 300-30162
Heat Shrinkable Tubing 2:1 on a Reel 2,4/1,2 blue
Porovnat
Heat Shrinkable Tubing 2:1 on a Reel 2,4/1,2 blue
HIS-PACK-2.4/1.2-PO-X-BU 300-30246
Porovnat
Přidat do sledovaných položek
1 pcs.
Blue (BU) HIS-PACK-2.4/1.2-PO-X-BU 300-30246
Heat Shrinkable Tubing 2:1 on a Reel 3,2/1,6 blue
Porovnat
Heat Shrinkable Tubing 2:1 on a Reel 3,2/1,6 blue
HIS-PACK-3.2/1.6-PO-X-BU 300-30326
Porovnat
Přidat do sledovaných položek
1 pcs.
Blue (BU) HIS-PACK-3.2/1.6-PO-X-BU 300-30326
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 280pcs.
RCA180SM10.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 280pcs.
RCB180SM10-PA66HIRHSUV/ST/ZN-BK 151-01390
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB180SM10-PA66HIRHSUV/ST/ZN-BK 151-01390
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.6 mm, 180°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.6 mm, 180°, black, 280pcs.
RCB180SM6SS-PA666V0/SS304-BK 151-02736
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB180SM6SS-PA666V0/SS304-BK 151-02736
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.4 mm, 90°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.4 mm, 90°, black, 280pcs.
RCB90SM10SS-PA666V0/SS304-BK 151-03006
Porovnat
Přidat do sledovaných položek
280
Black (BK) RCB90SM10SS-PA666V0/SS304-BK 151-03006
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 30°, black, 300pcs.
Porovnat
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 30°, black, 300pcs.
RCA30SM12-PA66HIRHSUV/ST/ZN-BK 151-01430
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) RCA30SM12-PA66HIRHSUV/ST/ZN-BK 151-01430
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 90°, black, 200pcs.
Porovnat
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 90°, black, 200pcs.
RCA90LM10-PA66HIRHSUV/ST/ZN-BK 151-01438
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCA90LM10-PA66HIRHSUV/ST/ZN-BK 151-01438
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 90°, black, 200pcs.
Porovnat
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 90°, black, 200pcs.
RCA90LM12-PA66HIRHSUV/ST/ZN-BK 151-01439
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCA90LM12-PA66HIRHSUV/ST/ZN-BK 151-01439
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 90°, black, 200pcs.
Porovnat
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 90°, black, 200pcs.
RCA90LM6-PA66HIRHSUV/ST/ZN-BK 151-01644
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCA90LM6-PA66HIRHSUV/ST/ZN-BK 151-01644
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 90°, black, 200pcs.
Porovnat
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 90°, black, 200pcs.
RCA90LM8-PA66HIRHSUV/ST/ZN-BK 151-01437
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCA90LM8-PA66HIRHSUV/ST/ZN-BK 151-01437
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 90°, black, 300pcs.
Porovnat
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 90°, black, 300pcs.
RCA90SM10-PA66HIRHSUV/ST/ZN-BK 151-01435
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) RCA90SM10-PA66HIRHSUV/ST/ZN-BK 151-01435
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 90°, black, 300pcs.
Porovnat
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 90°, black, 300pcs.
RCA90SM12-PA66HIRHSUV/ST/ZN-BK 151-01436
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) RCA90SM12-PA66HIRHSUV/ST/ZN-BK 151-01436
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 90°, black, 300pcs.
Porovnat
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 90°, black, 300pcs.
RCA90SM6-PA66HIRHSUV/ST/ZN-BK 151-01643
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) RCA90SM6-PA66HIRHSUV/ST/ZN-BK 151-01643
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 90°, black, 300pcs.
Porovnat
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 90°, black, 300pcs.
RCA90SM8-PA66HIRHSUV/ST/ZN-BK 151-01434
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) RCA90SM8-PA66HIRHSUV/ST/ZN-BK 151-01434
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 180°, black, 160pcs.
RCA180SM10.
Porovnat
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 180°, black, 160pcs.
RCC180SM10-PA66HIRHSUV/ST/ZN-BK 151-01475
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCC180SM10-PA66HIRHSUV/ST/ZN-BK 151-01475
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 160pcs.
Porovnat
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 160pcs.
RCC180SM6-PA66HIRHSUV/ST/ZN-BK 151-01653
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCC180SM6-PA66HIRHSUV/ST/ZN-BK 151-01653
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.4 mm, 180°, black, 160pcs.
Porovnat
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.4 mm, 180°, black, 160pcs.
RCC180SM8SS-PA666V0/SS304-BK 151-02737
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCC180SM8SS-PA666V0/SS304-BK 151-02737
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Facebook  Instagram  Twitter  YouTube  LinkedIn  Corporate Blog 
Kontakt VOP Impressum Mapa stránek Newsletter Pokyny a závazky Zásady ochrany osobních údajů
Aktualizace: 05/10/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.288.1) | Aktualizace: 05/10/2025 | Nastavení ochrany osobních údajů
Hledat prodejce Kontakt