Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
11/10/2025

Výsledky pro "D-Clip Series"

Nalezeno 3 556 výrobků 3 dalších položek
Poznámka:  Kombinace hledaných výrazů nevrátila žádné odpovídající výsledky.  Níže jsou výsledky, které odpovídají dílům dle Vašeho vyhledávání.

Typ: Zkuste změnit nebo odstranit výrazy, abyste zlepšili relevanci výsledků vyhledávání.

K dispozici jsou výsledky v následujících kategoriích:
Cable Ties and Fixings

Cable Ties and Fixings  (1931)

Cable Ties Inside Serrated  (455) Cable Ties Outside Serrated  (82) Cable Ties Without Serration  (35) Cable Ties, Releasable  (85) Cable Ties, Stainless Steel  (132) Cable Ties With Fixing Elements  (344) Cable Tie Mounts  (178) Fixing Elements  (142) Clips, Clamps and Plugs  (609)
Cable Ties and Fixings
Cable Ties and Fixings (1931)
Insulation

Insulation  (632)

Heat Shrink Tubing  (288) Heat Shrinkable Moulded Shapes  (333) Insulating tubes  (13)
Insulation
Insulation (632)
Cable Protection Systems

Cable Protection Systems  (180)

Non-Metallic Conduit Systems  (10) Spiral-Reinforced Conduit Systems  (10) Conduit System Accessories  (17) Protective Tubing and Spiral Binding  (20) Expandable Braided Sleeves  (18) Open Woven Sleeves  (18) Grommets  (60) Wiring Ducts and Accessories  (45)
Cable Protection Systems
Cable Protection Systems (180)
Electrical Installation

Electrical Installation  (1)

Industrial Silicones  (1)
Electrical Installation
Electrical Installation (1)
Identification Systems

Identification Systems  (515)

Wire and Cable Markers  (439) Control Panel Labelling  (19) Industrial Identification  (4) RFID tags and cable ties  (52) Security Labeling  (5) Hazardous Area Identification  (1)
Identification Systems
Identification Systems (515)
Application Tooling

Application Tooling  (35)

Automatic Cable Tying System  (1) Application Tooling for Cable Ties  (21) Application Tooling for Snappers  (3) Application Tooling for Non Shrinkable Tubing  (8) Application Tooling for Braided Sleeves  (2)
Application Tooling
Application Tooling (35)
Connectivity

Connectivity  (263)

Patch Panels  (6) Data Outlets  (5) Fibre  (12) Cable  (64) Accessories  (14) Enclosures  (84) Cablelok  (78) Broadband Accessories  (78)
Connectivity
Connectivity (263)
3 556 produkty
Resetovat vše
Fixing tie for stud, inside serrated, ⌀6.4-58.0mm, black, 500pcs.
Provides dual separation between bundles to prevent chafing and abrasion.
Porovnat
Fixing tie for stud, inside serrated, ⌀6.4-58.0mm, black, 500pcs.
DCT11-PA66HIRHSUV-BK 115-31101
Porovnat
Přidat do sledovaných položek
500 bag
Black (BK) DCT11-PA66HIRHSUV-BK 115-31101
Fixing tie for stud, inside serrated, ⌀6.4-58.0mm, black, 100pcs.
Provides dual separation between bundles to prevent chafing and abrasion.
Porovnat
Fixing tie for stud, inside serrated, ⌀6.4-58.0mm, black, 100pcs.
DCT11-PA66HIRHSUV-BK 115-00144
Porovnat
Přidat do sledovaných položek
100 bag
Black (BK) DCT11-PA66HIRHSUV-BK 115-00144
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
Porovnat
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
T50SOSSBD-M8-PA66HSW-BK 157-00039
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T50SOSSBD-M8-PA66HSW-BK 157-00039
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
T50SOSSBU-M8/10 for bundles which run below the stud.
Porovnat
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
T50SOSSBU-M8-PA66HSW-GY 157-00066
Porovnat
Přidat do sledovaných položek
100 pcs.
Grey (GY) T50SOSSBU-M8-PA66HSW-GY 157-00066
Fixing tie for screw fixation, inside serrated, ⌀3.0-100.0mm, natural, 100pcs.
Screw mount style creates low insertion and high extraction force.
Porovnat
Fixing tie for screw fixation, inside serrated, ⌀3.0-100.0mm, natural, 100pcs.
T50ML-PA66-NA 113-05419
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) T50ML-PA66-NA 113-05419
Fixing tie for screw fixation, inside serrated, ⌀1.5-32.0mm, natural, 100pcs.
Screw mount style creates low insertion and high extraction force.
Porovnat
Fixing tie for screw fixation, inside serrated, ⌀1.5-32.0mm, natural, 100pcs.
T50MS-PA66-NA 113-05819
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) T50MS-PA66-NA 113-05819
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 1000pcs.
The low-profile push mount design provides an overall shortened length, which assists in limiting protrusion on the opposing side of application surfaces.
Porovnat
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 1000pcs.
T50SOSKSFT5S-E-PA66HS-BK 126-00099
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) T50SOSKSFT5S-E-PA66HS-BK 126-00099
Fixing tie for hole (round), outside serrated, ⌀1.5-30.0mm, natural, 500pcs.
1-piece fixing tie with arrowhead for round holes sealed.
Porovnat
Fixing tie for hole (round), outside serrated, ⌀1.5-30.0mm, natural, 500pcs.
T50SOSSFT6.5E-MDL-PA66HS-NA 156-00271
Porovnat
Přidat do sledovaných položek
500 pcs.
Natural (NA) T50SOSSFT6.5E-MDL-PA66HS-NA 156-00271
Fixing tie for hole (round), inside serrated, ⌀1.5-16.0mm, natural, 100pcs.
Inside serrated T18RSF for round hole fixing and combined with cable tie fixing function.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀1.5-16.0mm, natural, 100pcs.
T18RSF-PA66HS-NA 126-00416
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) T18RSF-PA66HS-NA 126-00416
Fixing tie for hole (round), inside serrated, ⌀1.6-25.0mm, natural, 1000pcs.
Fixing tie with stand-off for round holes and with arrowhead.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀1.6-25.0mm, natural, 1000pcs.
T50SAH-PA66HS-NA 155-41102
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) T50SAH-PA66HS-NA 155-41102
Fixing tie for hole (oval), inside serrated, ⌀1.5-45.0mm, black, 1000pcs.
1-Piece Fixing Tie for round holes with wings.
Porovnat
Fixing tie for hole (oval), inside serrated, ⌀1.5-45.0mm, black, 1000pcs.
T80RFT6X12-PA66-BK 150-48396
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) T80RFT6X12-PA66-BK 150-48396
Fixing tie for hole (round), inside serrated, ⌀1.6-32mm, natural, 500pcs.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀1.6-32mm, natural, 500pcs.
T30RSF-PA66-NA 126-00330
Porovnat
Přidat do sledovaných položek
500 pcs.
Natural (NA) T30RSF-PA66-NA 126-00330
Fixing tie for hole (round), inside serrated, ⌀1.6-32mm, black, 500pcs.
Fixing tie for round holes with Arrowhead.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀1.6-32mm, black, 500pcs.
T30RSF-PA66HS-BK 126-00329
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T30RSF-PA66HS-BK 126-00329
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 4000pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Porovnat
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 4000pcs.
T50ROSFT6SO12.5A-PA66HIRHS-GY 157-00130
Porovnat
Přidat do sledovaných položek
4000 pcs.
Grey (GY) T50ROSFT6SO12.5A-PA66HIRHS-GY 157-00130
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Porovnat
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
T50ROSFT6SO12.5R-PA66HIRHSUV-BK 157-00165
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROSFT6SO12.5R-PA66HIRHSUV-BK 157-00165
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, grey, 1000pcs.
1-piece fixing tie, made out of PA46 with fir tree for a round hole.
Porovnat
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, grey, 1000pcs.
T50SOSFT6E1-PA46-GY 157-00059
Porovnat
Přidat do sledovaných položek
1000 pcs.
Grey (GY) T50SOSFT6E1-PA46-GY 157-00059
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 5000pcs.
Porovnat
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 5000pcs.
T50SOSFT6E3-PA66HIRHS-BK 157-00241
Porovnat
Přidat do sledovaných položek
5000 pcs.
Black (BK) T50SOSFT6E3-PA66HIRHS-BK 157-00241
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, grey, 1000pcs.
1-piece fixing tie, made out of PA46 with fir tree for a round hole.
Porovnat
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, grey, 1000pcs.
T50SOSFT8E-PA46-GY 157-00115
Porovnat
Přidat do sledovaných položek
1000 pcs.
Grey (GY) T50SOSFT8E-PA46-GY 157-00115
Fixing tie for cable bundles/with pipe/tube holder, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
Reusable clip with Cable tie for multiple bundling of cables in different directions and suitable for pre-installation and replacement in case of maintenance.
Porovnat
Fixing tie for cable bundles/with pipe/tube holder, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROC1A-PA66HS/PA66HIRHS-BK 156-00036
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROC1A-PA66HS/PA66HIRHS-BK 156-00036
Fixing tie with pipe/tube holder, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Porovnat
Fixing tie with pipe/tube holder, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROC1B-PA66HS/PA66HIRHS-BK 156-00306
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROC1B-PA66HS/PA66HIRHS-BK 156-00306
Fixing tie for stud, outside serrated, ⌀4.0-31.0mm, black, 500pcs.
2-piece fixing tie for stud bolts 5mm.
Porovnat
Fixing tie for stud, outside serrated, ⌀4.0-31.0mm, black, 500pcs.
T50SOSSBS5-PA66HS/PA66-BK 156-00079
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SOSSBS5-PA66HS/PA66-BK 156-00079
Fixing tie for stud, outside serrated, ⌀2.0-35.0mm, black, 500pcs.
Two-piece cable tie with weld stud fastener is ideal for installation onto the stud prior to attaching the cable.
Porovnat
Fixing tie for stud, outside serrated, ⌀2.0-35.0mm, black, 500pcs.
T50SOSSB5-PA66HS/POM-BK 156-00080
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SOSSB5-PA66HS/POM-BK 156-00080
Connector clip for hole (oval)/for connector, black, 1000pcs.
For a secure fixation simply push the connector by hand on our Connector Clip YCCFT62x122.
Porovnat
Connector clip for hole (oval)/for connector, black, 1000pcs.
YCCFT62x122-PA66HIRHS-BK 151-00180
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) YCCFT62x122-PA66HIRHS-BK 151-00180
Connector clip for hole (oval), EWCAP-005-11, black, 5000pcs.
Oval fir tree ensures a tight connection without rotation.
Porovnat
Connector clip for hole (oval), EWCAP-005-11, black, 5000pcs.
CC11-PA66HIRHSUV-BK 151-01144
Porovnat
Přidat do sledovaných položek
5000 pcs.
Black (BK) CC11-PA66HIRHSUV-BK 151-01144
Connector clip, EWCAP-005-11, black, 5000pcs.
Oval fir tree ensures a tight connection without rotation.
Porovnat
Connector clip, EWCAP-005-11, black, 5000pcs.
CC16-PA66HIRHSUV-BK 151-01297
Porovnat
Přidat do sledovaných položek
5000 pcs.
Black (BK) CC16-PA66HIRHSUV-BK 151-01297
Connector clip for edge, EWCAP-005-11, black, 1000pcs.
Connector clip attaches to surfaces with edge clip.
Porovnat
Connector clip for edge, EWCAP-005-11, black, 1000pcs.
CCEC6-PA66HIRHS-BK 150-92600
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) CCEC6-PA66HIRHS-BK 150-92600
Cable clip for adhesive use/with pipe/tube holder, ⌀3.2 mm, Dmax=3.0mm
Ideal for holding ribbon cables in computer equipment, gaming machines or domestic appliances.
Porovnat
Cable clip for adhesive use/with pipe/tube holder, ⌀3.2 mm, Dmax=3.0mm
TY8H1S-PA66-NA 151-12819
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) TY8H1S-PA66-NA 151-12819
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Bundling clip for hole (round), L=55.0mm, natural, 10000pcs.
Bundling Clip for round holes 6.5 mm.
Porovnat
Bundling clip for hole (round), L=55.0mm, natural, 10000pcs.
TC2FT6LG-PA66HIRHS-NA 151-00020
Porovnat
Přidat do sledovaných položek
10000 pcs.
Natural (NA) TC2FT6LG-PA66HIRHS-NA 151-00020
Fixing tie for edge, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
EdgeClip CBTO50R, rotatable 90°.
Porovnat
Fixing tie for edge, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
CBTO30R-PA66HS/PA66HIRHS-BK 156-01320
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) CBTO30R-PA66HS/PA66HIRHS-BK 156-01320
Fluoroelastomer Heat Shrinkable Tubing 2:1 4.8/2.4 black
Viton®-E for flexibility and protection against aggressive chemicals.
Porovnat
Fluoroelastomer Heat Shrinkable Tubing 2:1 4.8/2.4 black
VITON®-E-4.8/2.4-FPMX-BK 330-00480
Porovnat
Přidat do sledovaných položek
50 metre
Black (BK) VITON®-E-4.8/2.4-FPMX-BK 330-00480
Fluoroelastomer Heat Shrinkable Tubing 2:1 6.4/3.2 black
Viton®-E for flexibility and protection against aggressive chemicals.
Porovnat
Fluoroelastomer Heat Shrinkable Tubing 2:1 6.4/3.2 black
VITON®-E-6.4/3.2-FPMX-BK 330-00640
Porovnat
Přidat do sledovaných položek
50 metre
Black (BK) VITON®-E-6.4/3.2-FPMX-BK 330-00640
Fluoroelastomer Heat Shrinkable Tubing 2:1 12.7/6.4 black
Viton®-E for flexibility and protection against aggressive chemicals.
Porovnat
Fluoroelastomer Heat Shrinkable Tubing 2:1 12.7/6.4 black
VITON®-E-12.7/6.4-FPMX-BK 330-01270
Porovnat
Přidat do sledovaných položek
25 metre
Black (BK) VITON®-E-12.7/6.4-FPMX-BK 330-01270
Fluoroelastomer Heat Shrinkable Tubing 2:1 19.0/9.5 black
Viton®-E for flexibility and protection against aggressive chemicals.
Porovnat
Fluoroelastomer Heat Shrinkable Tubing 2:1 19.0/9.5 black
VITON®-E-19.0/9.5-FPMX-BK 330-01900
Porovnat
Přidat do sledovaných položek
25 metre
Black (BK) VITON®-E-19.0/9.5-FPMX-BK 330-01900
Thin Wall Heat Shrinkable Tubing 3:1 with Adhesive Liner 6/2 black
EPS300 and EPS400 offer high shrink ratios and protection against humidity.
Porovnat
Thin Wall Heat Shrinkable Tubing 3:1 with Adhesive Liner 6/2 black
EPS-300-6/2-PO-X-BK 340-06020
Porovnat
Přidat do sledovaných položek
300 metre
Black (BK) EPS-300-6/2-PO-X-BK 340-06020
Heat Shrinkable Tubing 3:1 (9/3 mm), thin wall, adhesive lined, 150m
EPS300 and EPS400 offer high shrink ratios and protection against humidity.
Porovnat
Heat Shrinkable Tubing 3:1 (9/3 mm), thin wall, adhesive lined, 150m
EPS-300-9/3-PO-X-BK 340-09030
Porovnat
Přidat do sledovaných položek
150 metre
Black (BK) EPS-300-9/3-PO-X-BK 340-09030
Heat Shrinkable Tubing 2:1 on a Reel 4,8/2,4 transparent
HIS Pack Heat Shrink Tubing 2:1 Dispenser Box. Perfect fit.
Porovnat
Heat Shrinkable Tubing 2:1 on a Reel 4,8/2,4 transparent
HIS-PACK-4.8/2.4-PO-X-CL 300-30483
Porovnat
Přidat do sledovaných položek
1 pcs.
Transparent (CL) HIS-PACK-4.8/2.4-PO-X-CL 300-30483
Heat Shrinkable Tubing 2:1 on a Reel 9,5/4,7 transparent
HIS Pack Heat Shrink Tubing 2:1 Dispenser Box. Perfect fit.
Porovnat
Heat Shrinkable Tubing 2:1 on a Reel 9,5/4,7 transparent
HIS-PACK-9.5/4.7-PO-X-CL 300-30953
Porovnat
Přidat do sledovaných položek
1 pcs.
Transparent (CL) HIS-PACK-9.5/4.7-PO-X-CL 300-30953
Heat Shrinkable Tubing 2:1 on a Reel 25,4/12,7 transparent
HIS Pack Heat Shrink Tubing 2:1 Dispenser Box. Perfect fit.
Porovnat
Heat Shrinkable Tubing 2:1 on a Reel 25,4/12,7 transparent
HIS-PACK-25.4/12.7-PO-X-CL 300-32543
Porovnat
Přidat do sledovaných položek
1 pcs.
Transparent (CL) HIS-PACK-25.4/12.7-PO-X-CL 300-32543
Heat Shrinkable Tubing 2:1 on a Reel 12,7/6,4 transparent
HIS Pack Heat Shrink Tubing 2:1 Dispenser Box. Perfect fit.
Porovnat
Heat Shrinkable Tubing 2:1 on a Reel 12,7/6,4 transparent
HIS-PACK-12.7/6.4-PO-X-CL 300-31273
Porovnat
Přidat do sledovaných položek
1 pcs.
Transparent (CL) HIS-PACK-12.7/6.4-PO-X-CL 300-31273
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-9.5/4.8-PO-X-CL 305-09519
Porovnat
Přidat do sledovaných položek
50 metre
Transparent (CL) HFT-B-9.5/4.8-PO-X-CL 305-09519
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
Edge Clip applies easily to plastic and metal sheets without the need for a mounting hole
Porovnat
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
T50SOSEC12E-PA66HS-BK 148-00200
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SOSEC12E-PA66HS-BK 148-00200
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Porovnat
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSEC5A-PA66HS/PA66HIRHS-BK 150-40591
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROSEC5A-PA66HS/PA66HIRHS-BK 150-40591
Heat Shrinkable Tubing 2:1 VG-Norm 1,2/0,6 yellow
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 1,2/0,6 yellow
HFT-A-1.2/0.6-PO-X-YE 305-01204
Porovnat
Přidat do sledovaných položek
100 metre
Yellow (YE) HFT-A-1.2/0.6-PO-X-YE 305-01204
Heat Shrinkable Tubing 2:1 VG-Norm 1.6/0.8 yellow
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 1.6/0.8 yellow
HFT-A-1.6/0.8-PO-X-YE 305-01604
Porovnat
Přidat do sledovaných položek
100 metre
Yellow (YE) HFT-A-1.6/0.8-PO-X-YE 305-01604
Heat Shrinkable Tubing 2:1 VG-Norm 1.6/0.8 white
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 1.6/0.8 white
HFT-A-1.6/0.8-PO-X-WH 305-01609
Porovnat
Přidat do sledovaných položek
100 metre
White (WH) HFT-A-1.6/0.8-PO-X-WH 305-01609
Heat Shrinkable Tubing 2:1 VG-Norm 2.4/1.2 red
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 2.4/1.2 red
HFT-A-2.4/1.2-PO-X-RD 305-02402
Porovnat
Přidat do sledovaných položek
100 metre
Red (RD) HFT-A-2.4/1.2-PO-X-RD 305-02402
Heat Shrinkable Tubing 2:1 VG-Norm 2.4/1.2 yellow
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 2.4/1.2 yellow
HFT-A-2.4/1.2-PO-X-YE 305-02404
Porovnat
Přidat do sledovaných položek
100 metre
Yellow (YE) HFT-A-2.4/1.2-PO-X-YE 305-02404
Heat Shrinkable Tubing 2:1 VG-Norm 2.4/1.2 white
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 2.4/1.2 white
HFT-A-2.4/1.2-PO-X-WH 305-02409
Porovnat
Přidat do sledovaných položek
100 metre
White (WH) HFT-A-2.4/1.2-PO-X-WH 305-02409
Heat Shrinkable Tubing 2:1 VG-Norm 3.2/1.6 green/yellow
TFN21 - available in a wide range of colours and sizes.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 3.2/1.6 green/yellow
HFT-A-3.2/1.6-PO-X-GNYE 305-03245
Porovnat
Přidat do sledovaných položek
100 metre
Green-Yellow (GNYE) HFT-A-3.2/1.6-PO-X-GNYE 305-03245
Heat Shrinkable Tubing 2:1 VG-Norm 3.2/1.6 red
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 3.2/1.6 red
HFT-A-3.2/1.6-PO-X-RD 305-03202
Porovnat
Přidat do sledovaných položek
100 metre
Red (RD) HFT-A-3.2/1.6-PO-X-RD 305-03202
Heat Shrinkable Tubing 2:1 VG-Norm 3.2/1.6 blue
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 3.2/1.6 blue
HFT-A-3.2/1.6-PO-X-BU 305-03206
Porovnat
Přidat do sledovaných položek
100 metre
Blue (BU) HFT-A-3.2/1.6-PO-X-BU 305-03206
Heat Shrinkable Tubing 2:1 VG-Norm 4.8/2.4 red
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 4.8/2.4 red
HFT-A-4.8/2.4-PO-X-RD 305-04802
Porovnat
Přidat do sledovaných položek
75 metre
Red (RD) HFT-A-4.8/2.4-PO-X-RD 305-04802
Heat Shrinkable Tubing 2:1 VG-Norm 4.8/2.4 yellow
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 4.8/2.4 yellow
HFT-A-4.8/2.4-PO-X-YE 305-04804
Porovnat
Přidat do sledovaných položek
75 metre
Yellow (YE) HFT-A-4.8/2.4-PO-X-YE 305-04804
Heat Shrinkable Tubing 2:1 VG-Norm 4.8/2.4 blue
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 4.8/2.4 blue
HFT-A-4.8/2.4-PO-X-BU 305-04806
Porovnat
Přidat do sledovaných položek
75 metre
Blue (BU) HFT-A-4.8/2.4-PO-X-BU 305-04806
Heat Shrinkable Tubing 2:1 VG-Norm 6.4/3.2 green/yellow
TFN21 - available in a wide range of colours and sizes.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 6.4/3.2 green/yellow
HFT-A-6.4/3.2-PO-X-GNYE 305-06445
Porovnat
Přidat do sledovaných položek
75 metre
Green-Yellow (GNYE) HFT-A-6.4/3.2-PO-X-GNYE 305-06445
Heat Shrinkable Tubing 2:1 VG-Norm 6.4/3.2 red
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 6.4/3.2 red
HFT-A-6.4/3.2-PO-X-RD 305-06402
Porovnat
Přidat do sledovaných položek
75 metre
Red (RD) HFT-A-6.4/3.2-PO-X-RD 305-06402
Heat Shrinkable Tubing 2:1 VG-Norm 6.4/3.2 yellow
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 6.4/3.2 yellow
HFT-A-6.4/3.2-PO-X-YE 305-06404
Porovnat
Přidat do sledovaných položek
75 metre
Yellow (YE) HFT-A-6.4/3.2-PO-X-YE 305-06404
Heat Shrinkable Tubing 2:1 VG-Norm 6.4/3.2 blue
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 6.4/3.2 blue
HFT-A-6.4/3.2-PO-X-BU 305-06406
Porovnat
Přidat do sledovaných položek
75 metre
Blue (BU) HFT-A-6.4/3.2-PO-X-BU 305-06406
Heat Shrinkable Tubing 2:1 VG-Norm 9.5/4.8 green/yellow
TFN21 - available in a wide range of colours and sizes.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 9.5/4.8 green/yellow
HFT-A-9.5/4.8-PO-X-GNYE 305-09545
Porovnat
Přidat do sledovaných položek
50 metre
Green-Yellow (GNYE) HFT-A-9.5/4.8-PO-X-GNYE 305-09545
Heat Shrinkable Tubing 2:1 VG-Norm 9.5/4.8 red
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 9.5/4.8 red
HFT-A-9.5/4.8-PO-X-RD 305-09502
Porovnat
Přidat do sledovaných položek
50 metre
Red (RD) HFT-A-9.5/4.8-PO-X-RD 305-09502
Heat Shrinkable Tubing 2:1 VG-Norm 9.5/4.8 blue
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 9.5/4.8 blue
HFT-A-9.5/4.8-PO-X-BU 305-09506
Porovnat
Přidat do sledovaných položek
50 metre
Blue (BU) HFT-A-9.5/4.8-PO-X-BU 305-09506
Heat Shrinkable Tubing 2:1 VG-Norm 12.7/6.4 green/yellow
TFN21 - available in a wide range of colours and sizes.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 12.7/6.4 green/yellow
HFT-A-12.7/6.4-PO-X-GNYE 305-12745
Porovnat
Přidat do sledovaných položek
50 metre
Green-Yellow (GNYE) HFT-A-12.7/6.4-PO-X-GNYE 305-12745
Heat Shrinkable Tubing 2:1 VG-Norm 12.7/6.4 blue
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 12.7/6.4 blue
HFT-A-12.7/6.4-PO-X-BU 305-12706
Porovnat
Přidat do sledovaných položek
50 metre
Blue (BU) HFT-A-12.7/6.4-PO-X-BU 305-12706
Heat Shrinkable Tubing 2:1 VG-Norm 19.0/9.5 red
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 19.0/9.5 red
HFT-A-19.0/9.5-PO-X-RD 305-19002
Porovnat
Přidat do sledovaných položek
25 metre
Red (RD) HFT-A-19.0/9.5-PO-X-RD 305-19002
Heat Shrinkable Tubing 2:1 VG-Norm 19.0/9.5 yellow
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 19.0/9.5 yellow
HFT-A-19.0/9.5-PO-X-YE 305-19004
Porovnat
Přidat do sledovaných položek
25 metre
Yellow (YE) HFT-A-19.0/9.5-PO-X-YE 305-19004
Heat Shrinkable Tubing 2:1 VG-Norm 19.0/9.5 white
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 19.0/9.5 white
HFT-A-19.0/9.5-PO-X-WH 305-19009
Porovnat
Přidat do sledovaných položek
25 metre
White (WH) HFT-A-19.0/9.5-PO-X-WH 305-19009
Heat Shrinkable Tubing 2:1 VG-Norm 25.4/12.7 yellow
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 25.4/12.7 yellow
HFT-A-25.4/12.7-PO-X-YE 305-25404
Porovnat
Přidat do sledovaných položek
25 metre
Yellow (YE) HFT-A-25.4/12.7-PO-X-YE 305-25404
Heat Shrinkable Tubing 2:1 VG-Norm 25.4/12.7 white
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 25.4/12.7 white
HFT-A-25.4/12.7-PO-X-WH 305-25409
Porovnat
Přidat do sledovaných položek
25 metre
White (WH) HFT-A-25.4/12.7-PO-X-WH 305-25409
Heat Shrinkable Tubing 2:1 VG-Norm 38.0/19.0 red
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 38.0/19.0 red
HFT-A-38.0/19.0-PO-X-RD 305-38102
Porovnat
Přidat do sledovaných položek
50 metre
Red (RD) HFT-A-38.0/19.0-PO-X-RD 305-38102
Heat Shrinkable Tubing 2:1 VG-Norm 38.0/19.0 yellow
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 38.0/19.0 yellow
HFT-A-38.0/19.0-PO-X-YE 305-38104
Porovnat
Přidat do sledovaných položek
50 metre
Yellow (YE) HFT-A-38.0/19.0-PO-X-YE 305-38104
Heat Shrinkable Tubing 2:1 VG-Norm 38.0/19.0 blue
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 38.0/19.0 blue
HFT-A-38.0/19.0-PO-X-BU 305-38106
Porovnat
Přidat do sledovaných položek
50 metre
Blue (BU) HFT-A-38.0/19.0-PO-X-BU 305-38106
Heat Shrinkable Tubing 2:1 VG-Norm 50.8/25.4 red
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 50.8/25.4 red
HFT-A-50.8/25.4-PO-X-RD 305-50802
Porovnat
Přidat do sledovaných položek
35 metre
Red (RD) HFT-A-50.8/25.4-PO-X-RD 305-50802
Heat Shrinkable Tubing 2:1 VG-Norm 50.8/25.4 white
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 50.8/25.4 white
HFT-A-50.8/25.4-PO-X-WH 305-50809
Porovnat
Přidat do sledovaných položek
35 metre
White (WH) HFT-A-50.8/25.4-PO-X-WH 305-50809
Heat Shrinkable Tubing 2:1 VG-Norm 76.0/38.0 yellow
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 76.0/38.0 yellow
HFT-A-76.0/38.0-PO-X-YE 305-76204
Porovnat
Přidat do sledovaných položek
25 metre
Yellow (YE) HFT-A-76.0/38.0-PO-X-YE 305-76204
Heat shrinkable tubing 2:1 (101.6/50.8 mm), self extinguishing, black, 25 m reel
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat shrinkable tubing 2:1 (101.6/50.8 mm), self extinguishing, black, 25 m reel
HFT-A-101.6/50.8-PO-X-BK 305-91600
Porovnat
Přidat do sledovaných položek
25 metre
Black (BK) HFT-A-101.6/50.8-PO-X-BK 305-91600
Heat Shrinkable Tubing 2:1 VG-Norm 101.6/50.8 white
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 101.6/50.8 white
HFT-A-101.6/50.8-PO-X-WH 305-91609
Porovnat
Přidat do sledovaných položek
25 metre
White (WH) HFT-A-101.6/50.8-PO-X-WH 305-91609
Heat Shrinkable Tubing 3:1 on a Reel 3/1 green/yellow
Porovnat
Heat Shrinkable Tubing 3:1 on a Reel 3/1 green/yellow
HIS-3-3/1-PO-X-GNYE 308-30307
Porovnat
Přidat do sledovaných položek
1 pcs.
Green-Yellow (GNYE) HIS-3-3/1-PO-X-GNYE 308-30307
Heat Shrinkable Tubing 3:1 on a Reel 6/2 green/yellow
Porovnat
Heat Shrinkable Tubing 3:1 on a Reel 6/2 green/yellow
HIS-3-6/2-PO-X-GNYE 308-30607
Porovnat
Přidat do sledovaných položek
1 pcs.
Green-Yellow (GNYE) HIS-3-6/2-PO-X-GNYE 308-30607
Heat Shrinkable Tubing 3:1 on a Reel 9/3 green/yellow
Porovnat
Heat Shrinkable Tubing 3:1 on a Reel 9/3 green/yellow
HIS-3-9/3-PO-X-GNYE 308-30907
Porovnat
Přidat do sledovaných položek
1 pcs.
Green-Yellow (GNYE) HIS-3-9/3-PO-X-GNYE 308-30907
Heat Shrinkable Tubing 3:1 on a Reel 12/4 green/yellow
Porovnat
Heat Shrinkable Tubing 3:1 on a Reel 12/4 green/yellow
HIS-3-12/4-PO-X-GNYE 308-31207
Porovnat
Přidat do sledovaných položek
1 pcs.
Green-Yellow (GNYE) HIS-3-12/4-PO-X-GNYE 308-31207
Heat Shrinkable Tubing 3:1 on a Reel 18/6 blue
Porovnat
Heat Shrinkable Tubing 3:1 on a Reel 18/6 blue
HIS-3-18/6-PO-X-BU 308-31806
Porovnat
Přidat do sledovaných položek
1 pcs.
Blue (BU) HIS-3-18/6-PO-X-BU 308-31806
Heat Shrinkable Tubing 3:1 on a Reel 18/6 green/yellow
Porovnat
Heat Shrinkable Tubing 3:1 on a Reel 18/6 green/yellow
HIS-3-18/6-PO-X-GNYE 308-31807
Porovnat
Přidat do sledovaných položek
1 pcs.
Green-Yellow (GNYE) HIS-3-18/6-PO-X-GNYE 308-31807
Heat Shrinkable Tubing 3:1 on a Reel 24/8 blue
Porovnat
Heat Shrinkable Tubing 3:1 on a Reel 24/8 blue
HIS-3-24/8-PO-X-BU 308-32406
Porovnat
Přidat do sledovaných položek
1 pcs.
Blue (BU) HIS-3-24/8-PO-X-BU 308-32406
Heat Shrinkable Tubing 3:1 on a Reel 24/8 green/yellow
Porovnat
Heat Shrinkable Tubing 3:1 on a Reel 24/8 green/yellow
HIS-3-24/8-PO-X-GNYE 308-32407
Porovnat
Přidat do sledovaných položek
1 pcs.
Green-Yellow (GNYE) HIS-3-24/8-PO-X-GNYE 308-32407
Heat Shrinkable Tubing 2:1 on a Reel 1,2/0,6 red
Porovnat
Heat Shrinkable Tubing 2:1 on a Reel 1,2/0,6 red
HIS-PACK-1.2/0.6-PO-X-RD 300-30122
Porovnat
Přidat do sledovaných položek
1 pcs.
Red (RD) HIS-PACK-1.2/0.6-PO-X-RD 300-30122
Heat Shrinkable Tubing 2:1 on a Reel 1,2/0,6 blue
Porovnat
Heat Shrinkable Tubing 2:1 on a Reel 1,2/0,6 blue
HIS-PACK-1.2/0.6-PO-X-BU 300-30126
Porovnat
Přidat do sledovaných položek
1 pcs.
Blue (BU) HIS-PACK-1.2/0.6-PO-X-BU 300-30126
Heat Shrinkable Tubing 2:1 on a Reel 1,6/0,8 blue
Porovnat
Heat Shrinkable Tubing 2:1 on a Reel 1,6/0,8 blue
HIS-PACK-1.6/0.8-PO-X-BU 300-30166
Porovnat
Přidat do sledovaných položek
1 pcs.
Blue (BU) HIS-PACK-1.6/0.8-PO-X-BU 300-30166
Heat Shrinkable Tubing 2:1 on a Reel 3,2/1,6 transparent
HIS Pack Heat Shrink Tubing 2:1 Dispenser Box. Perfect fit.
Porovnat
Heat Shrinkable Tubing 2:1 on a Reel 3,2/1,6 transparent
HIS-PACK-3.2/1.6-PO-X-CL 300-30323
Porovnat
Přidat do sledovaných položek
1 pcs.
Transparent (CL) HIS-PACK-3.2/1.6-PO-X-CL 300-30323
Facebook  Instagram  Twitter  YouTube  LinkedIn  Corporate Blog 
Kontakt VOP Impressum Mapa stránek Newsletter Pokyny a závazky Zásady ochrany osobních údajů
Aktualizace: 05/10/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.288.1) | Aktualizace: 05/10/2025 | Nastavení ochrany osobních údajů
Hledat prodejce Kontakt