Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
15/12/2025

Výsledky pro "wind energy sector"

Nalezeno 2 850 výrobků 2 dalších položek
K dispozici jsou výsledky v následujících kategoriích:
Cable Ties and Fixings

Cable Ties and Fixings  (1019)

Cable Ties Inside Serrated  (301) Cable Ties Outside Serrated  (34) Cable Ties Without Serration  (26) Cable Ties, Releasable  (49) Cable Ties, Stainless Steel  (75) Cable Ties With Fixing Elements  (123) Cable Tie Mounts  (115) Fixing Elements  (37) Clips, Clamps and Plugs  (283)
Cable Ties and Fixings
Cable Ties and Fixings (1019)
Insulation

Insulation  (325)

Heat Shrink Tubing  (321) Heat Shrinkable Moulded Shapes  (5)
Insulation
Insulation (325)
Cable Protection Systems

Cable Protection Systems  (155)

Metallic Conduit Systems  (73) Protective Tubing and Spiral Binding  (73) Open Woven Sleeves  (7) Edge Protection  (1) Wiring Ducts and Accessories  (1)
Cable Protection Systems
Cable Protection Systems (155)
Electrical Installation

Electrical Installation  (271)

Electrical Tapes  (91) Cast Resin Technology  (82) Gel Technology  (2) Cable Entry Systems  (96)
Electrical Installation
Electrical Installation (271)
Identification Systems

Identification Systems  (1025)

Wire and Cable Markers  (735) Control Panel Labelling  (128) Industrial Identification  (227) RFID tags and cable ties  (56) Security Labeling  (13) Hazardous Area Identification  (10) Printers and Software  (23)
Identification Systems
Identification Systems (1025)
Application Tooling

Application Tooling  (55)

Automatic Cable Tying System  (24) Application Tooling for Cable Ties  (22) Application Tooling for Snappers  (2) Application Tooling for Heat Shrinkable Tubing  (4) Application Tooling for Non Shrinkable Tubing  (2) Application Tooling for Braided Sleeves  (1)
Application Tooling
Application Tooling (55)
2 850 produkty
Resetovat vše
Cable tie inside serrated, 245x4.6mm, ⌀1.5-65.0mm, black, 200pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 245x4.6mm, ⌀1.5-65.0mm, black, 200pcs.
T50M-PA66HS-BK 111-02274
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) T50M-PA66HS-BK 111-02274
Cable tie inside serrated, 245x4.6mm, ⌀1.5-65.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 245x4.6mm, ⌀1.5-65.0mm, black, 100pcs.
T50M-PA11-BK 111-02218
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T50M-PA11-BK 111-02218
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.
Cable tie inside serrated, 387x7.6mm, ⌀3.0-100mm, grey, 100pcs.
T-Series Cable Ties feature inside serrations to provide a positive hold on wire and cable bundles.
Porovnat
Cable tie inside serrated, 387x7.6mm, ⌀3.0-100mm, grey, 100pcs.
T120R(E)-PA66-GY 111-00489
Porovnat
Přidat do sledovaných položek
100 pcs.
Grey (GY) T120R(E)-PA66-GY 111-00489
Cable tie inside serrated, 387x7.6mm, ⌀3.0-100mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 387x7.6mm, ⌀3.0-100mm, black, 100pcs.
T120R(E)-PA66HIR-BK 111-12073
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T120R(E)-PA66HIR-BK 111-12073
Cable tie inside serrated, 387x7.6mm, ⌀3.0-100mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 387x7.6mm, ⌀3.0-100mm, black, 100pcs.
T120R(E)-PA66HIR(S)-BK 111-00165
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T120R(E)-PA66HIR(S)-BK 111-00165
Cable tie inside serrated, 387x7.6mm, ⌀3.0-100mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 387x7.6mm, ⌀3.0-100mm, black, 100pcs.
T120R(E)-PA66HIR(S)-BK 111-00167
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T120R(E)-PA66HIR(S)-BK 111-00167
Cable tie outside serrated, 385x7.6mm, ⌀5.0-105mm, black, 100pcs.
T18ROS outside serrated Cable Tie.
Porovnat
Cable tie outside serrated, 385x7.6mm, ⌀5.0-105mm, black, 100pcs.
T120ROS-PA66HIRHS(REC)-BK 118-00174
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T120ROS-PA66HIRHS(REC)-BK 118-00174
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Cable tie outside serrated, 245x4.6mm, ⌀1.6-66.0mm, black, 100pcs.
T18ROS outside serrated Cable Tie.
Porovnat
Cable tie outside serrated, 245x4.6mm, ⌀1.6-66.0mm, black, 100pcs.
T50MOS-PA66HIRHS(REC)-BK 118-00173
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T50MOS-PA66HIRHS(REC)-BK 118-00173
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Ratchet O-Clamp
Porovnat
Ratchet O-Clamp
SGROC15.5-20FTOVAL-PA66HIRHSUV/TPE-BK 151-04076
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) SGROC15.5-20FTOVAL-PA66HIRHSUV/TPE-BK 151-04076
Fitting for metallic conduits, nom⌀10mm, metal, 10pcs.
HelaGuard LTS-EI End Insert.
Porovnat
Fitting for metallic conduits, nom⌀10mm, metal, 10pcs.
LTS10-EI-NPB-ML 166-32700
Porovnat
Přidat do sledovaných položek
10 pcs.
Metal (ML) LTS10-EI-NPB-ML 166-32700
Fitting for metallic conduits, nom⌀12mm, metal, 10pcs.
HelaGuard LTS-EI End Insert.
Porovnat
Fitting for metallic conduits, nom⌀12mm, metal, 10pcs.
LTS12-EI-NPB-ML 166-32701
Porovnat
Přidat do sledovaných položek
10 pcs.
Metal (ML) LTS12-EI-NPB-ML 166-32701
Fitting for metallic conduits, nom⌀16mm, metal, 10pcs.
HelaGuard LTS-EI End Insert.
Porovnat
Fitting for metallic conduits, nom⌀16mm, metal, 10pcs.
LTS16-EI-NPB-ML 166-32702
Porovnat
Přidat do sledovaných položek
10 pcs.
Metal (ML) LTS16-EI-NPB-ML 166-32702
Fitting for metallic conduits, nom⌀20mm, metal, 10pcs.
HelaGuard LTS-EI End Insert.
Porovnat
Fitting for metallic conduits, nom⌀20mm, metal, 10pcs.
LTS20-EI-NPB-ML 166-32703
Porovnat
Přidat do sledovaných položek
10 pcs.
Metal (ML) LTS20-EI-NPB-ML 166-32703
Fitting for metallic conduits, nom⌀25mm, metal, 10pcs.
HelaGuard LTS-EI End Insert.
Porovnat
Fitting for metallic conduits, nom⌀25mm, metal, 10pcs.
LTS25-EI-NPB-ML 166-32704
Porovnat
Přidat do sledovaných položek
10 pcs.
Metal (ML) LTS25-EI-NPB-ML 166-32704
Fitting for metallic conduits, nom⌀32mm, metal, 2pcs.
HelaGuard LTS-EI End Insert.
Porovnat
Fitting for metallic conduits, nom⌀32mm, metal, 2pcs.
LTS32-EI-NPB-ML 166-32705
Porovnat
Přidat do sledovaných položek
2 pcs.
Metal (ML) LTS32-EI-NPB-ML 166-32705
Fitting for metallic conduits, nom⌀40mm, metal, 1pc.
HelaGuard LTS-EI End Insert.
Porovnat
Fitting for metallic conduits, nom⌀40mm, metal, 1pc.
LTS40-EI-NPB-ML 166-32706
Porovnat
Přidat do sledovaných položek
1 pcs.
Metal (ML) LTS40-EI-NPB-ML 166-32706
Fitting for metallic conduits, nom⌀50mm, metal, 1pc.
HelaGuard LTS-EI End Insert.
Porovnat
Fitting for metallic conduits, nom⌀50mm, metal, 1pc.
LTS50-EI-NPB-ML 166-32707
Porovnat
Přidat do sledovaných položek
1 pcs.
Metal (ML) LTS50-EI-NPB-ML 166-32707
Cable tie mount for adhesive use, ⌀3.1 mm, black, 100pcs.
FKH80 are designed to retain flat ribbon cables.
Porovnat
Cable tie mount for adhesive use, ⌀3.1 mm, black, 100pcs.
FKH80APT-I-PA66HIR-BK 151-01563
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) FKH80APT-I-PA66HIR-BK 151-01563
Cable tie mount for adhesive use, Wmax=4.0mm, ⌀3.1 mm, white, 100pcs.
Mounting bases Q-Mount.
Porovnat
Cable tie mount for adhesive use, Wmax=4.0mm, ⌀3.1 mm, white, 100pcs.
QM20APT-A-PA66-WH 151-02971
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) QM20APT-A-PA66-WH 151-02971
Cable tie mount for adhesive use, Wmax=5.1mm, ⌀4.1 mm, white, 100pcs.
Mounting bases Q-Mount.
Porovnat
Cable tie mount for adhesive use, Wmax=5.1mm, ⌀4.1 mm, white, 100pcs.
QM30APT-A-PA66-WH 151-02973
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) QM30APT-A-PA66-WH 151-02973
Cable tie mount for adhesive use, Wmax=8.4mm, ⌀4.1 mm, white, 50pcs.
Mounting bases Q-Mount.
Porovnat
Cable tie mount for adhesive use, Wmax=8.4mm, ⌀4.1 mm, white, 50pcs.
QM40APT-A-PA66-WH 151-02975
Porovnat
Přidat do sledovaných položek
50 pcs.
White (WH) QM40APT-A-PA66-WH 151-02975
Cable tie mount for adhesive use, Wmax=8.4mm, ⌀4.1 mm, black, 50pcs.
Mounting bases Q-Mount.
Porovnat
Cable tie mount for adhesive use, Wmax=8.4mm, ⌀4.1 mm, black, 50pcs.
QM40APT-A-PA66-BK 151-02976
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) QM40APT-A-PA66-BK 151-02976
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Label, durable/UV resistant, silver, thermal transfer print, 7x13mm, 1000pcs.
Helatag 1221 Series, silver panel plate labels.
Porovnat
Label, durable/UV resistant, silver, thermal transfer print, 7x13mm, 1000pcs.
TAG13-07TDK1-1221-SR 596-00573
Porovnat
Přidat do sledovaných položek
1000 reel
Silver (SR) TAG13-07TDK1-1221-SR 596-00573
Label, durable/UV resistant, silver, thermal transfer print, 22x22mm, 1000pcs.
Helatag 1221 Series, silver panel plate labels.
Porovnat
Label, durable/UV resistant, silver, thermal transfer print, 22x22mm, 1000pcs.
TAG22-22TDK1-1221-SR 596-00574
Porovnat
Přidat do sledovaných položek
1000 reel
Silver (SR) TAG22-22TDK1-1221-SR 596-00574
Label, durable/UV resistant, silver, thermal transfer print, 8x27mm, 1000pcs.
Helatag 1221 Series, silver panel plate labels.
Porovnat
Label, durable/UV resistant, silver, thermal transfer print, 8x27mm, 1000pcs.
TAG27-08TDK1-1221-SR 596-00575
Porovnat
Přidat do sledovaných položek
1000 reel
Silver (SR) TAG27-08TDK1-1221-SR 596-00575
Label, durable/UV resistant, silver, thermal transfer print, 15x27mm, 1000pcs.
Helatag 1221 Series, silver panel plate labels.
Porovnat
Label, durable/UV resistant, silver, thermal transfer print, 15x27mm, 1000pcs.
TAG27-15TDK1-1221-SR 596-00577
Porovnat
Přidat do sledovaných položek
1000 reel
Silver (SR) TAG27-15TDK1-1221-SR 596-00577
Label, durable/UV resistant, silver, thermal transfer print, 27x27mm, 1000pcs.
Helatag 1221 Series, silver panel plate labels.
Porovnat
Label, durable/UV resistant, silver, thermal transfer print, 27x27mm, 1000pcs.
TAG27-27TDK1-1221-SR 596-00579
Porovnat
Přidat do sledovaných položek
1000 reel
Silver (SR) TAG27-27TDK1-1221-SR 596-00579
Label, durable/UV resistant, silver, thermal transfer print, 18x35mm, 1000pcs.
Helatag 1221 Series, silver panel plate labels.
Porovnat
Label, durable/UV resistant, silver, thermal transfer print, 18x35mm, 1000pcs.
TAG35-18TDK1-1221-SR 596-00580
Porovnat
Přidat do sledovaných položek
1000 reel
Silver (SR) TAG35-18TDK1-1221-SR 596-00580
Label, durable/UV resistant, silver, thermal transfer print, 15x45mm, 1000pcs.
Helatag 1221 Series, silver panel plate labels.
Porovnat
Label, durable/UV resistant, silver, thermal transfer print, 15x45mm, 1000pcs.
TAG45-15TDK1-1221-SR 596-00581
Porovnat
Přidat do sledovaných položek
1000 reel
Silver (SR) TAG45-15TDK1-1221-SR 596-00581
Label, durable/UV resistant, silver, thermal transfer print, 25x45mm, 1000pcs.
Helatag 1221 Series, silver panel plate labels.
Porovnat
Label, durable/UV resistant, silver, thermal transfer print, 25x45mm, 1000pcs.
TAG45-25TDK1-1221-SR 596-00582
Porovnat
Přidat do sledovaných položek
1000 reel
Silver (SR) TAG45-25TDK1-1221-SR 596-00582
Label, durable/UV resistant, silver, thermal transfer print, 45x90mm, 500pcs.
Helatag 1221 Series, silver panel plate labels.
Porovnat
Label, durable/UV resistant, silver, thermal transfer print, 45x90mm, 500pcs.
TAG90-45TDK1-1221-SR 596-00584
Porovnat
Přidat do sledovaných položek
500 reel
Silver (SR) TAG90-45TDK1-1221-SR 596-00584
Label, durable/UV resistant, silver, thermal transfer print, 30x100mm, 250pcs.
Helatag 1221 Series, silver panel plate labels.
Porovnat
Label, durable/UV resistant, silver, thermal transfer print, 30x100mm, 250pcs.
TAG100-30TDK1-1221-SR 596-00585
Porovnat
Přidat do sledovaných položek
250 reel
Silver (SR) TAG100-30TDK1-1221-SR 596-00585
Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.
Porovnat
Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.
SSPC4-SS316L-ML 151-00837
Porovnat
Přidat do sledovaných položek
100 pcs.
Metal (ML) SSPC4-SS316L-ML 151-00837
Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.
Porovnat
Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.
SSPC6-SS316L-ML 151-00839
Porovnat
Přidat do sledovaných položek
100 pcs.
Metal (ML) SSPC6-SS316L-ML 151-00839
RFID label, 860-960 MHz (UHF), white, 45.00x18.00mm, 5000pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Porovnat
RFID label, 860-960 MHz (UHF), white, 45.00x18.00mm, 5000pcs.
TAG45x18T1UHF-1601-WH 556-00839
Porovnat
Přidat do sledovaných položek
5000 pcs.
White (WH) TAG45x18T1UHF-1601-WH 556-00839
RFID label, 860-960 MHz (UHF), white, 73.00x13.00mm, 5000pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Porovnat
RFID label, 860-960 MHz (UHF), white, 73.00x13.00mm, 5000pcs.
TAG73x13T1UHF-1601-WH 556-00840
Porovnat
Přidat do sledovaných položek
5000 pcs.
White (WH) TAG73x13T1UHF-1601-WH 556-00840
RFID label, 860-960 MHz (UHF), white, 44.00x44.00mm, 2000pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Porovnat
RFID label, 860-960 MHz (UHF), white, 44.00x44.00mm, 2000pcs.
TAGS44T1UHF-1601-WH 556-00845
Porovnat
Přidat do sledovaných položek
2000 pcs.
White (WH) TAGS44T1UHF-1601-WH 556-00845
RFID label, 860-960 MHz (UHF), white, 110.00x13.00mm, 800pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Porovnat
RFID label, 860-960 MHz (UHF), white, 110.00x13.00mm, 800pcs.
TAG110x13T1UHFM-1601-WH 556-00841
Porovnat
Přidat do sledovaných položek
800 pcs.
White (WH) TAG110x13T1UHFM-1601-WH 556-00841
RFID label, 860-960 MHz (UHF), white, 54.00x24.00mm, 450pcs.
RFID HF labels for easy inventory and asset management.
Porovnat
RFID label, 860-960 MHz (UHF), white, 54.00x24.00mm, 450pcs.
TAG54x24T1UHFM-1601-WH 556-00844
Porovnat
Přidat do sledovaných položek
450 pcs.
White (WH) TAG54x24T1UHFM-1601-WH 556-00844
RFID label, 860-960 MHz (UHF), white, 55.00x14.00mm, 800pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Porovnat
RFID label, 860-960 MHz (UHF), white, 55.00x14.00mm, 800pcs.
TAG55x14T1UHFM-1601-WH 556-00842
Porovnat
Přidat do sledovaných položek
800 pcs.
White (WH) TAG55x14T1UHFM-1601-WH 556-00842
RFID label, 860-960 MHz (UHF), white, 250.00x33.00mm, 500pcs.
RFID bundling label TAG250x33T1UHF – temporary unique identification of cable and wire harnesses.
Porovnat
RFID label, 860-960 MHz (UHF), white, 250.00x33.00mm, 500pcs.
TAG250x33T1UHF-1603-WH 556-00846
Porovnat
Přidat do sledovaných položek
500 pcs.
White (WH) TAG250x33T1UHF-1603-WH 556-00846
RFID label, 860-960 MHz (UHF), white, 130.00x50.00mm, 1000pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Porovnat
RFID label, 860-960 MHz (UHF), white, 130.00x50.00mm, 1000pcs.
TAG130x50T1UHF-1603-WH 556-00847
Porovnat
Přidat do sledovaných položek
1000 pcs.
White (WH) TAG130x50T1UHF-1603-WH 556-00847
Electrical tape, L=20m, W=19mm, T=0.20mm, black, 10 pcs.
HelaTape Flex 20 – Higher thickness for quicker layering.
Porovnat
Electrical tape, L=20m, W=19mm, T=0.20mm, black, 10 pcs.
HTAPE-FLEX20-19x20-PVC-BK 710-10300
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) HTAPE-FLEX20-19x20-PVC-BK 710-10300
Electrical tape, L=33m, W=19mm, T=0.25mm, black, 1 pc.
HelaTape Flex 25 for higher abrasion resistance.
Porovnat
Electrical tape, L=33m, W=19mm, T=0.25mm, black, 1 pc.
HTAPE-FLEX25-19x33-PVC-BK 710-00450
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) HTAPE-FLEX25-19x33-PVC-BK 710-00450
Electrical tape, L=33m, W=38mm, T=0.25mm, black, 1 pc.
HelaTape Flex 25 for higher abrasion resistance.
Porovnat
Electrical tape, L=33m, W=38mm, T=0.25mm, black, 1 pc.
HTAPE-FLEX25-38x33-PVC-BK 710-00451
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) HTAPE-FLEX25-38x33-PVC-BK 710-00451
Cast resin joint, Straight-through i, 3 x 1.5mm² to 5 x 6mm², L=190mm, 165 ml, Polyurethane resin (PUR) black
Straight-through joints i-Line SF (safe-filling) / Straight through joints i-A Line SF (safe-filling) – Armoured.
Porovnat
Cast resin joint, Straight-through i, 3 x 1.5mm² to 5 x 6mm², L=190mm, 165 ml, Polyurethane resin (PUR) black
i-1 / SF-PUR-BK 435-12101
Porovnat
Přidat do sledovaných položek
1 set
Black (BK) i-1 / SF-PUR-BK 435-12101
Cast resin joint, Straight-through i, 5 x 1.5mm² to 5 x 16mm², L=276mm, 400 ml, Polyurethane resin (PUR) black
Straight-through joints i-Line SF (safe-filling) / Straight through joints i-A Line SF (safe-filling) – Armoured.
Porovnat
Cast resin joint, Straight-through i, 5 x 1.5mm² to 5 x 16mm², L=276mm, 400 ml, Polyurethane resin (PUR) black
i-2 / SF-PUR-BK 435-12103
Porovnat
Přidat do sledovaných položek
1 set
Black (BK) i-2 / SF-PUR-BK 435-12103
Cast resin joint, Straight-through i, 4 x 50mm² to 4 x 150mm², L=520mm, 2 x 1450 ml, Polyurethane resin (PUR) black
Straight-through joints i-Line SF (safe-filling) / Straight through joints i-A Line SF (safe-filling) – Armoured.
Porovnat
Cast resin joint, Straight-through i, 4 x 50mm² to 4 x 150mm², L=520mm, 2 x 1450 ml, Polyurethane resin (PUR) black
i-5 / SF-PUR-BK 435-12106
Porovnat
Přidat do sledovaných položek
1 Set
Black (BK) i-5 / SF-PUR-BK 435-12106
Cast resin joint, Straight-through i, 4 x 150mm² to 4 x 240mm², L=700mm, 4 x 1640 ml, Polyurethane resin (PUR) black
Straight-through joints i-Line SF (safe-filling) / Straight through joints i-A Line SF (safe-filling) – Armoured.
Porovnat
Cast resin joint, Straight-through i, 4 x 150mm² to 4 x 240mm², L=700mm, 4 x 1640 ml, Polyurethane resin (PUR) black
i-6 / SF-PUR-BK 435-12107
Porovnat
Přidat do sledovaných položek
1 Set
Black (BK) i-6 / SF-PUR-BK 435-12107
Cast resin joint, Branch T, 5 x 1.5mm² to 5 x 10mm², L=276mm, 455 ml, Polyurethane resin (PUR) green
Branch joint T-Line SF (safe filling) / Branch joint T-A Line SF (safe filling) – Armoured.
Porovnat
Cast resin joint, Branch T, 5 x 1.5mm² to 5 x 10mm², L=276mm, 455 ml, Polyurethane resin (PUR) green
T-1 / SF-PUR-GN 435-12069
Porovnat
Přidat do sledovaných položek
1 set
Green (GN) T-1 / SF-PUR-GN 435-12069
Cast resin joint, Branch T, 5 x 10mm² to 5 x 50mm², L=520mm, 2 x 1450 ml, Polyurethane resin (PUR) green
Branch joint T-Line SF (safe filling) / Branch joint T-A Line SF (safe filling) – Armoured.
Porovnat
Cast resin joint, Branch T, 5 x 10mm² to 5 x 50mm², L=520mm, 2 x 1450 ml, Polyurethane resin (PUR) green
T-3 / SF-PUR-GN 435-12071
Porovnat
Přidat do sledovaných položek
1 Set
Green (GN) T-3 / SF-PUR-GN 435-12071
Cast resin joint, Parallel P, 4 x 1.5mm² to 5 x 10mm², L=230mm, 490 ml, Polyurethane resin (PUR) black
Parallel branch joint PA-11 PUR 771.
Porovnat
Cast resin joint, Parallel P, 4 x 1.5mm² to 5 x 10mm², L=230mm, 490 ml, Polyurethane resin (PUR) black
PA-11 / SF-PUR-BK 435-00186
Porovnat
Přidat do sledovaných položek
1 Set
Black (BK) PA-11 / SF-PUR-BK 435-00186
Cast resin joint, Parallel P, 4 x 16mm² to 5 x 25mm², L=300mm, Polyurethane resin (PUR) black
Parallel branch joint PA-12 PUR 771.
Porovnat
Cast resin joint, Parallel P, 4 x 16mm² to 5 x 25mm², L=300mm, Polyurethane resin (PUR) black
PA-12 / SF-PUR-BK 435-00187
Porovnat
Přidat do sledovaných položek
1 Set
Black (BK) PA-12 / SF-PUR-BK 435-00187
Cast resin joint, Parallel P, 4 x 10mm² to 5 x 35mm², L=420mm, 2240 ml, Polyurethane resin (PUR) black
Parallel branch joint PA-13 PUR 771.
Porovnat
Cast resin joint, Parallel P, 4 x 10mm² to 5 x 35mm², L=420mm, 2240 ml, Polyurethane resin (PUR) black
PA-13 / SF-PUR-BK 435-00188
Porovnat
Přidat do sledovaných položek
1 Set
Black (BK) PA-13 / SF-PUR-BK 435-00188
Cast resin, Polyurethane resin (PUR) green, 455ml
Two-component polyurethane cast resin PUR 33.
Porovnat
Cast resin, Polyurethane resin (PUR) green, 455ml
Resin-33-SF-N-PUR-GN 435-12116
Porovnat
Přidat do sledovaných položek
1 pcs.
Green (GN) Resin-33-SF-N-PUR-GN 435-12116
Cast resin, Polyurethane resin (PUR) black, 95ml
Two-component polyurethane cast resin PUR 771.
Porovnat
Cast resin, Polyurethane resin (PUR) black, 95ml
Resin-771-SF_N-PUR-BK 435-01238
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) Resin-771-SF_N-PUR-BK 435-01238
Cast resin, Polyurethane resin (PUR) black, 240ml
Two-component polyurethane cast resin PUR 771.
Porovnat
Cast resin, Polyurethane resin (PUR) black, 240ml
Resin-771-SF_N-PUR-BK 435-01240
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) Resin-771-SF_N-PUR-BK 435-01240
Cast resin, Polyurethane resin (PUR) black, 400ml
Two-component polyurethane cast resin PUR 771.
Porovnat
Cast resin, Polyurethane resin (PUR) black, 400ml
Resin-771-SF_N-PUR-BK 435-01241
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) Resin-771-SF_N-PUR-BK 435-01241
Cast resin joint, Parallel P, 4 x 35mm² to 4 x 150mm², L=300mm, 1950 ml, Polyurethane resin (PUR) green
Parallel branch joint PAH-2 130/300, house connector set.
Porovnat
Cast resin joint, Parallel P, 4 x 35mm² to 4 x 150mm², L=300mm, 1950 ml, Polyurethane resin (PUR) green
PAH-2 / SF-PUR-GN 435-12073
Porovnat
Přidat do sledovaných položek
1 Set
Green (GN) PAH-2 / SF-PUR-GN 435-12073
Cast resin joint, Parallel P, 4 x 35mm² to 4 x 185mm², L=360mm, 2800 ml, Polyurethane resin (PUR) green
Parallel branch joint PAH-3 135/360, house connector set.
Porovnat
Cast resin joint, Parallel P, 4 x 35mm² to 4 x 185mm², L=360mm, 2800 ml, Polyurethane resin (PUR) green
PAH-3 / SF-PUR-GN 435-12075
Porovnat
Přidat do sledovaných položek
1 Set
Green (GN) PAH-3 / SF-PUR-GN 435-12075
Cast resin joint, Parallel P, 4 x 70mm² to 4 x 240mm², L=420mm, 3900 ml, Polyurethane resin (PUR) green
Parallel branch joint PAH-4 140/420, house connector set.
Porovnat
Cast resin joint, Parallel P, 4 x 70mm² to 4 x 240mm², L=420mm, 3900 ml, Polyurethane resin (PUR) green
PAH-4 / SF-PUR-GN 435-12077
Porovnat
Přidat do sledovaných položek
1 Set
Green (GN) PAH-4 / SF-PUR-GN 435-12077
Applicator tool WIC-Series, pack=5pcs. (WIC Tool)
WIC Tool, for easy application of WIC markers.
Porovnat
Applicator tool WIC-Series, pack=5pcs. (WIC Tool)
WIC Tool-PA6GF15-BK 561-00001
Porovnat
Přidat do sledovaných položek
5 pcs.
Black (BK) WIC Tool-PA6GF15-BK 561-00001
Cable tag, manual marking, 100.0x9.0mm, black, bag=100pcs.
Porovnat
Cable tag, manual marking, 100.0x9.0mm, black, bag=100pcs.
AT3-PA66-BK 151-41310
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) AT3-PA66-BK 151-41310
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tag, manual marking, 100.0x9.0mm, natural, bag=100pcs.
Porovnat
Cable tag, manual marking, 100.0x9.0mm, natural, bag=100pcs.
AT3-PA66-NA 151-41319
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) AT3-PA66-NA 151-41319
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for hole (round), ⌀4.7 mm, Dmin=11.0mm, Dmax=15.0mm
Porovnat
Cable clip for hole (round), ⌀4.7 mm, Dmin=11.0mm, Dmax=15.0mm
WPC15-PA66-NA 151-75159
Porovnat
Přidat do sledovaných položek
500 pcs.
Natural (NA) WPC15-PA66-NA 151-75159
Cable clip for hole (round), ⌀4.7 mm, Dmin=11.0mm, Dmax=20.0mm
Porovnat
Cable clip for hole (round), ⌀4.7 mm, Dmin=11.0mm, Dmax=20.0mm
WPC20-PA66-NA 151-75209
Porovnat
Přidat do sledovaných položek
500 pcs.
Natural (NA) WPC20-PA66-NA 151-75209
Cable clip for hole (round), ⌀4.7 mm, Dmin=5.0mm, Dmax=5.0mm
Porovnat
Cable clip for hole (round), ⌀4.7 mm, Dmin=5.0mm, Dmax=5.0mm
WPC5-PA66-NA 151-75059
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) WPC5-PA66-NA 151-75059
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
IAHC( )AH in combination with an IAHC( )T.
Porovnat
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=19.0mm, Dmax=28.0mm
IAHC3CH-PA66HIRHS-BK 151-00381
Porovnat
Přidat do sledovaných položek
450 pcs.
Black (BK) IAHC3CH-PA66HIRHS-BK 151-00381
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=27.0mm, Dmax=36.0mm
Porovnat
Cable clip for hole (oval), ⌀6.2 x 12.2 mm, Dmin=27.0mm, Dmax=36.0mm
IAHC4CH-PA6HIRHS-BK 151-00383
Porovnat
Přidat do sledovaných položek
450 pcs.
Black (BK) IAHC4CH-PA6HIRHS-BK 151-00383
Corrugated tube clip for hole (round), nom⌀4.5mm, black, 500pcs.
The tubing is clicked into the CTC clamp and is held firmly.
Porovnat
Corrugated tube clip for hole (round), nom⌀4.5mm, black, 500pcs.
CTC4.5FT6LG-PA66HIRHS-BK 151-14314
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) CTC4.5FT6LG-PA66HIRHS-BK 151-14314
Corrugated tube clip for hole (round), nom⌀10.0mm, black, 500pcs.
The tubing is clicked into the CTC clamp and is held firmly.
Porovnat
Corrugated tube clip for hole (round), nom⌀10.0mm, black, 500pcs.
CTC10FT6-PA66HIRHS-BK 151-14311
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) CTC10FT6-PA66HIRHS-BK 151-14311
Corrugated tube clip for hole (round), nom⌀13.0mm, black, 500pcs.
The tubing is clicked into the CTC clamp and is held firmly.
Porovnat
Corrugated tube clip for hole (round), nom⌀13.0mm, black, 500pcs.
CTC13FT6LG-PA66HIRHS-BK 151-00019
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) CTC13FT6LG-PA66HIRHS-BK 151-00019
Corrugated tube clip for hole (round), nom⌀10.0mm, black, 500pcs.
Clip includes an internal rib that spans the inside of the bracket to fit securely into the profile of the tubing to prevent lateral movement and slipping of the tubing.
Porovnat
Corrugated tube clip for hole (round), nom⌀10.0mm, black, 500pcs.
CTC10FT9-PA66HIRHS-BK 155-17801
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) CTC10FT9-PA66HIRHS-BK 155-17801
Corrugated tube clip for hole (round), nom⌀13.0mm, black, 500pcs.
Clip includes an internal rib that spans the inside of the bracket to fit securely into the profile of the tubing to prevent lateral movement and slipping of the tubing.
Porovnat
Corrugated tube clip for hole (round), nom⌀13.0mm, black, 500pcs.
CTC13FT6-PA66HIRHS-BK 151-14312
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) CTC13FT6-PA66HIRHS-BK 151-14312
Cable clip with pipe/tube holder, Dmin=35.0mm, Dmax=45.0mm
When cable is pushed inside, it automatically activates the locking features which causes it to close.
Porovnat
Cable clip with pipe/tube holder, Dmin=35.0mm, Dmax=45.0mm
IAHC5T-PA66HIRHS-BK 151-00195
Porovnat
Přidat do sledovaných položek
700 pcs.
Black (BK) IAHC5T-PA66HIRHS-BK 151-00195
Corrugated tube clip for stud, nom⌀10.0mm, black, 500pcs.
Fixing element for convoluted tubes 10 mm with stud fixation 6 mm.
Porovnat
Corrugated tube clip for stud, nom⌀10.0mm, black, 500pcs.
CTC10SBS6-PA66HIRHS-BK 151-00702
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) CTC10SBS6-PA66HIRHS-BK 151-00702
Cable clip for screw fixation, ⌀3.1 mm
FKH25 are designed to retain flat ribbon cables.
Porovnat
Cable clip for screw fixation, ⌀3.1 mm
FKH25-PA66HIR-BK 151-16250
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) FKH25-PA66HIR-BK 151-16250
Cable clip for screw fixation, ⌀3.1 mm
FKH30 mounts are designed to retain flat ribbon cables.
Porovnat
Cable clip for screw fixation, ⌀3.1 mm
FKH30-PA66HIR-BK 151-16300
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) FKH30-PA66HIR-BK 151-16300
Cable clip for screw fixation, ⌀3.1 mm
FKH50 are designed to retain flat ribbon cables.
Porovnat
Cable clip for screw fixation, ⌀3.1 mm
FKH50-PA66HIR-BK 151-16500
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) FKH50-PA66HIR-BK 151-16500
Cable clip for screw fixation, ⌀3.1 mm
FKH80 are designed to retain flat ribbon cables.
Porovnat
Cable clip for screw fixation, ⌀3.1 mm
FKH80-PA66HIR-BK 151-16800
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) FKH80-PA66HIR-BK 151-16800
Cable tie inside serrated, 388.0x7.6mm, ⌀3.0-100mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 388.0x7.6mm, ⌀3.0-100mm, black, 100pcs.
T120R-PA66HIRHS-BK 111-02384
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T120R-PA66HIRHS-BK 111-02384
Cable tie inside serrated, 385.0x7.6mm, ⌀5.0-105.0mm, beige, 100pcs.
T-Series biodegradable cable ties for secure bundling in broad applications.
Porovnat
Cable tie inside serrated, 385.0x7.6mm, ⌀5.0-105.0mm, beige, 100pcs.
T120R-Bio-PLbiodegradable-BGE 111-12083
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.
Porovnat
Přidat do sledovaných položek
100 pcs.
Beige (BGE) T120R-Bio-PLbiodegradable-BGE 111-12083
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.
Cable tie inside serrated, 600x7.6mm, ⌀15.0-175mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 600x7.6mm, ⌀15.0-175mm, black, 100pcs.
T120XM-PA66W-BK 111-00171
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T120XM-PA66W-BK 111-00171
Cable tie inside serrated, 820x8.8mm, ⌀8.0-245mm, black, 50pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 820x8.8mm, ⌀8.0-245mm, black, 50pcs.
T150L-PA66HS-BK 111-01687
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) T150L-PA66HS-BK 111-01687
Cable tie inside serrated, 820x8.8mm, ⌀8.0-245mm, black, 50pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 820x8.8mm, ⌀8.0-245mm, black, 50pcs.
T150L-PA66UV-BK 111-01689
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) T150L-PA66UV-BK 111-01689
Cable tie mount for hole (round), Wmax=9.3mm, ⌀5.9 - 6.4 mm, natural, 100pcs.
Cable tie mount for round holes with special designed two wedge footpart for high pull out forces.
Porovnat
Cable tie mount for hole (round), Wmax=9.3mm, ⌀5.9 - 6.4 mm, natural, 100pcs.
TY5K3-PA66HS-NA 152-11309
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) TY5K3-PA66HS-NA 152-11309
Facebook  Instagram  Twitter  YouTube  LinkedIn  Corporate Blog 
Kontakt VOP Impressum Mapa stránek Newsletter Pokyny a závazky Zásady ochrany osobních údajů
Aktualizace: 14/12/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.292.5) | Aktualizace: 14/12/2025 | Nastavení ochrany osobních údajů
Hledat prodejce Kontakt