Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
19/12/2025

Výsledky pro "18"

Nalezeno 603 výrobků 7 dalších položek
K dispozici jsou výsledky v následujících kategoriích:
Cable Ties and Fixings

Cable Ties and Fixings  (205)

Cable Ties Inside Serrated  (58) Cable Ties Outside Serrated  (18) Cable Ties Without Serration  (1) Cable Ties, Stainless Steel  (1) Cable Ties With Fixing Elements  (56) Cable Tie Mounts  (30) Fixing Elements  (27) Clips, Clamps and Plugs  (37)
Cable Ties and Fixings
Cable Ties and Fixings (205)
Insulation

Insulation  (71)

Heat Shrink Tubing  (55) Heat Shrinkable Moulded Shapes  (16)
Insulation
Insulation (71)
Cable Protection Systems

Cable Protection Systems  (216)

Non-Metallic Conduit Systems  (12) Metallic Conduit Systems  (5) Spiral-Reinforced Conduit Systems  (6) Conduit System Accessories  (5) Protective Tubing and Spiral Binding  (8) Expandable Braided Sleeves  (9) Open Woven Sleeves  (12) Electromagnetic Shielding Sleeves  (3) Edge Protection  (1) Grommets  (2) Wiring Ducts and Accessories  (165)
Cable Protection Systems
Cable Protection Systems (216)
Electrical Installation

Electrical Installation  (24)

Wire Connectors  (1) Cable Rods  (1) Electrical Tapes  (16) Cast Resin Technology  (2) Gel Technology  (2) Cable Entry Systems  (2)
Electrical Installation
Electrical Installation (24)
Identification Systems

Identification Systems  (64)

Wire and Cable Markers  (58) Control Panel Labelling  (5) Industrial Identification  (6)
Identification Systems
Identification Systems (64)
Application Tooling

Application Tooling  (23)

Automatic Cable Tying System  (6) Application Tooling for Cable Ties  (10) Application Tooling for Snappers  (2) Application Tooling for Heat Shrinkable Tubing  (1) Application Tooling for Non Shrinkable Tubing  (4)
Application Tooling
Application Tooling (23)
603 produkty
Resetovat vše
MM30 30/6 1m length-PO-X-BK
MM30 heatshrink tubing, medium wall.
Porovnat
MM30 30/6 1m length-PO-X-BK
MM30 30/6 1m length-PO-X-BK 323-25201
Porovnat
Přidat do sledovaných položek
5 pcs.
Black (BK) MM30 30/6 1m length-PO-X-BK 323-25201
MM30 40/12 1m length-PO-X-BK
MM30 heatshrink tubing, medium wall.
Porovnat
MM30 40/12 1m length-PO-X-BK
MM30 40/12 1m length-PO-X-BK 323-25203
Porovnat
Přidat do sledovaných položek
3 pcs.
Black (BK) MM30 40/12 1m length-PO-X-BK 323-25203
MM30 55/16 1m length-PO-X-BK
MM30 heatshrink tubing, medium wall.
Porovnat
MM30 55/16 1m length-PO-X-BK
MM30 55/16 1m length-PO-X-BK 323-25205
Porovnat
Přidat do sledovaných položek
2 pcs.
Black (BK) MM30 55/16 1m length-PO-X-BK 323-25205
MM30 95/25 1m length-PO-X-BK
MM30 heatshrink tubing, medium wall.
Porovnat
MM30 95/25 1m length-PO-X-BK
MM30 95/25 1m length-PO-X-BK 323-25207
Porovnat
Přidat do sledovaných položek
2 pcs.
Black (BK) MM30 95/25 1m length-PO-X-BK 323-25207
MM30 115/34 1m length-PO-X-BK
MM30 heatshrink tubing, medium wall.
Porovnat
MM30 115/34 1m length-PO-X-BK
MM30 115/34 1m length-PO-X-BK 323-25208
Porovnat
Přidat do sledovaných položek
Black (BK) MM30 115/34 1m length-PO-X-BK 323-25208
MM30 120/40 1m length-PO-X-BK
MM30 heatshrink tubing, medium wall.
Porovnat
MM30 120/40 1m length-PO-X-BK
MM30 120/40 1m length-PO-X-BK 323-25209
Porovnat
Přidat do sledovaných položek
Black (BK) MM30 120/40 1m length-PO-X-BK 323-25209
MM30 140/42 1m length-PO-X-BK
MM30 heatshrink tubing, medium wall.
Porovnat
MM30 140/42 1m length-PO-X-BK
MM30 140/42 1m length-PO-X-BK 323-25211
Porovnat
Přidat do sledovaných položek
2 pcs.
Black (BK) MM30 140/42 1m length-PO-X-BK 323-25211
MM30 160/50 1m length-PO-X-BK
MM30 heatshrink tubing, medium wall.
Porovnat
MM30 160/50 1m length-PO-X-BK
MM30 160/50 1m length-PO-X-BK 323-25212
Porovnat
Přidat do sledovaných položek
2 pcs.
Black (BK) MM30 160/50 1m length-PO-X-BK 323-25212
MM30 180/58 1m length-PO-X-BK
MM30 heatshrink tubing, medium wall.
Porovnat
MM30 180/58 1m length-PO-X-BK
MM30 180/58 1m length-PO-X-BK 323-25213
Porovnat
Přidat do sledovaných položek
2 pcs.
Black (BK) MM30 180/58 1m length-PO-X-BK 323-25213
MM30 205/65 1m length-PO-X-BK
MM30 heatshrink tubing, medium wall.
Porovnat
MM30 205/65 1m length-PO-X-BK
MM30 205/65 1m length-PO-X-BK 323-25214
Porovnat
Přidat do sledovaných položek
2 pcs.
Black (BK) MM30 205/65 1m length-PO-X-BK 323-25214
MM30 235/65 1m length-PO-X-BK
MM30 heatshrink tubing, medium wall.
Porovnat
MM30 235/65 1m length-PO-X-BK
MM30 235/65 1m length-PO-X-BK 323-25215
Porovnat
Přidat do sledovaných položek
2 pcs.
Black (BK) MM30 235/65 1m length-PO-X-BK 323-25215
Cable marking carrier Helafix, 25mx19.00mm, transparent, reel=25m
Multi-purpose identification potential: Helafix HC and HCR.
Porovnat
Cable marking carrier Helafix, 25mx19.00mm, transparent, reel=25m
HCR18-EVA-CL 525-19003
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
25 pcs.
Transparent (CL) HCR18-EVA-CL 525-19003
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable marking carrier Helafix, 35.0x19.00mm, transparent, pack=50pcs.
Multi-purpose identification potential: Helafix HC and HCR.
Porovnat
Cable marking carrier Helafix, 35.0x19.00mm, transparent, pack=50pcs.
HC18-35-EVA-CL 525-19353
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pack
Transparent (CL) HC18-35-EVA-CL 525-19353
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable grommet, natural, 2000pcs.
Push-on caps and elbow grommets in various dimensions.
Porovnat
Cable grommet, natural, 2000pcs.
OP4828-PE-NA 631-58289
Porovnat
Přidat do sledovaných položek
2000 pcs.
Natural (NA) OP4828-PE-NA 631-58289
Fitting for corrugated tubing, nom⌀16mm, M20, black, 10pcs.
HelaGuard HG-S Straight, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀16mm, M20, black, 10pcs.
HG16-S-M20-PA66-BK 166-21003
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG16-S-M20-PA66-BK 166-21003
Fitting for corrugated tubing, nom⌀34mm, M32, black, 10pcs.
HelaGuard HGL-S Straight with conduit seal, IP68.
Porovnat
Fitting for corrugated tubing, nom⌀34mm, M32, black, 10pcs.
HGL34-S-M32-PA66/TPE-BK 166-21605
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HGL34-S-M32-PA66/TPE-BK 166-21605
Fitting for corrugated tubing, nom⌀18mm, PG13.5, 90°, black, 10pcs.
HelaGuard HG-90 90° Elbow, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀18mm, PG13.5, 90°, black, 10pcs.
HG18-90-PG13-PA66-BK 166-22226
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG18-90-PG13-PA66-BK 166-22226
Fitting for corrugated tubing, nom⌀54mm, M50, 45°, black, 2pcs.
HelaGuard HGL-45 45° Elbow with conduit seal, IP68.
Porovnat
Fitting for corrugated tubing, nom⌀54mm, M50, 45°, black, 2pcs.
HGL54-45-M50-PA66/TPE-BK 166-24005
Porovnat
Přidat do sledovaných položek
2 pcs.
Black (BK) HGL54-45-M50-PA66/TPE-BK 166-24005
Fitting for metallic conduits, nom⌀10mm, PG7, metal, 10pcs.
HelaGuard SC-SM Swivel External Thread.
Porovnat
Fitting for metallic conduits, nom⌀10mm, PG7, metal, 10pcs.
SC10-SM-PG7-NPB/PS-ML 166-30410
Porovnat
Přidat do sledovaných položek
10 pcs.
Metal (ML) SC10-SM-PG7-NPB/PS-ML 166-30410
Cable tie outside serrated, 203.2x4.6mm, ⌀1.5-50.0mm, black, 100pcs.
T18ROS outside serrated Cable Tie.
Porovnat
Cable tie outside serrated, 203.2x4.6mm, ⌀1.5-50.0mm, black, 100pcs.
T50ROS-PA66HIRHS(REC)-BK 118-00149
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T50ROS-PA66HIRHS(REC)-BK 118-00149
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Self amalgamating tape, L=9.1m, W=25mm, T=0.51mm, grey, 1 pc.
HelaTape Power 800 is a silicone rubber tape with triangular cross-section.
Porovnat
Self amalgamating tape, L=9.1m, W=25mm, T=0.51mm, grey, 1 pc.
HTAPE-POWER800-SI-GY 711-10400
Porovnat
Přidat do sledovaných položek
1 pcs.
Grey (GY) HTAPE-POWER800-SI-GY 711-10400
Connector clip for hole (oval), black, 500pcs.
Porovnat
Connector clip for hole (oval), black, 500pcs.
CCSFT7x12-PA66HIRHS-BK 151-00194
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) CCSFT7x12-PA66HIRHS-BK 151-00194
Bundling clip for hole (round), L=54.0mm, black, 500pcs.
Perfect for securing cable bundles, hoses or pipes.
Porovnat
Bundling clip for hole (round), L=54.0mm, black, 500pcs.
CHA2-PA66-BK 151-02901
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) CHA2-PA66-BK 151-02901
Cable tie inside serrated, 200.0x2.5mm, ⌀1.5-55.0mm, black, 500pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 200.0x2.5mm, ⌀1.5-55.0mm, black, 500pcs.
T18L-PA66W-BK 111-00850
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T18L-PA66W-BK 111-00850
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22.0mm, black, 1000pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22.0mm, black, 1000pcs.
T18R-PA66W-BK 111-00844
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) T18R-PA66W-BK 111-00844
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22.0mm, black, 100pcs.
Inside serrated cable ties manufactured from Post Industrial Recycled (PIR) PA66.
Porovnat
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22.0mm, black, 100pcs.
T18R-PA66HIRHS(REC)-BK 111-00000
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T18R-PA66HIRHS(REC)-BK 111-00000
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Fixing tie for hole (round), inside serrated, ⌀45.0mm, black, 500pcs.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀45.0mm, black, 500pcs.
T50RFT9-PA66HS/PA66HIRHS-BK 156-01144
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50RFT9-PA66HS/PA66HIRHS-BK 156-01144
Cable tie mount for screw fixation, Wmax=6.0mm, ⌀4.5 mm, M4 Screw, black, 100pcs.
KR8G5 Srew Fixing Mounts with curved design
Porovnat
Cable tie mount for screw fixation, Wmax=6.0mm, ⌀4.5 mm, M4 Screw, black, 100pcs.
KR6G5-PA66-BK 151-24600
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) KR6G5-PA66-BK 151-24600
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=6.4mm, ⌀4.5 mm, M4 Screw, blue, 100pcs.
Porovnat
Cable tie mount for screw fixation, Wmax=6.4mm, ⌀4.5 mm, M4 Screw, blue, 100pcs.
KR6G5-E/TFE-BU 151-00653
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Blue (BU) KR6G5-E/TFE-BU 151-00653
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Aluminium frame mount for Bosch Rexroth/MayTec, W=8.0mm, T=2.2mm, black, 500pcs.
Porovnat
Aluminium frame mount for Bosch Rexroth/MayTec, W=8.0mm, T=2.2mm, black, 500pcs.
ACFM4W8PT2.2-PA66/6HIRHS-BK 151-03176
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) ACFM4W8PT2.2-PA66/6HIRHS-BK 151-03176
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Aluminium frame mount for Bosch Rexroth/MayTec, W=8.0mm, T=2.2mm, black, 25pcs.
Porovnat
Aluminium frame mount for Bosch Rexroth/MayTec, W=8.0mm, T=2.2mm, black, 25pcs.
ACFM4W8PT2.2-PA66/PA6HIRHS-BK 151-03247
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
25 pcs.
Black (BK) ACFM4W8PT2.2-PA66/PA6HIRHS-BK 151-03247
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Aluminium frame mount for Item/MiniTec, W=8.0mm, T=4.5mm, black, 25pcs.
Porovnat
Aluminium frame mount for Item/MiniTec, W=8.0mm, T=4.5mm, black, 25pcs.
ACFM5W8PT4,5-PA66/6HIRHS-BK 151-03245
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
25 pcs.
Black (BK) ACFM5W8PT4,5-PA66/6HIRHS-BK 151-03245
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Aluminium frame mount for Item, W=10.0mm, T=5.3mm, black, 500pcs.
Porovnat
Aluminium frame mount for Item, W=10.0mm, T=5.3mm, black, 500pcs.
ACFM7W10PT5.3-PA66/6HIRHS-BK 151-03193
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) ACFM7W10PT5.3-PA66/6HIRHS-BK 151-03193
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Aluminium frame mount for Item, W=10.0mm, T=5.3mm, black, 25pcs.
Porovnat
Aluminium frame mount for Item, W=10.0mm, T=5.3mm, black, 25pcs.
ACFM7W10PT5.3-PA66/6HIRHS-BK 151-03246
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
25 pcs.
Black (BK) ACFM7W10PT5.3-PA66/6HIRHS-BK 151-03246
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Aluminium frame mount for Item, W=6.2mm, T=2.75mm, black, 500pcs.
ACFM8W6.2PT3 (Aluminium Clip Frame Mount).
Porovnat
Aluminium frame mount for Item, W=6.2mm, T=2.75mm, black, 500pcs.
ACFM8W6.2PT2.75-PA66/6HIRHS-BK 151-03248
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) ACFM8W6.2PT2.75-PA66/6HIRHS-BK 151-03248
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Aluminium frame mount for Item, W=6.2mm, T=2.75mm, black, 25Bag
ACFM8W6.2PT3 (Aluminium Clip Frame Mount).
Porovnat
Aluminium frame mount for Item, W=6.2mm, T=2.75mm, black, 25Bag
ACFM8W6.2PT2.75-PA66/6HIRHS-BK 151-03249
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
25 pcs.
Black (BK) ACFM8W6.2PT2.75-PA66/6HIRHS-BK 151-03249
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Accessory, TELS-Series, black, 50pcs. (EL-TY (TELS-SPK2))
Continuous strap and separate heads allow for any bundle diameter, eliminating waste.
Porovnat
Accessory, TELS-Series, black, 50pcs. (EL-TY (TELS-SPK2))
EL-TY (TELS-SPK2)-PP-BK 111-32000
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) EL-TY (TELS-SPK2)-PP-BK 111-32000
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Cable tie mount for stud, Wmax=7.7mm, ⌀14.0 mm, black, 300pcs.
From left to right: Bold Nut HDBN16, SFTP-Spacer and at the front: SFTP-Fixing.
Porovnat
Cable tie mount for stud, Wmax=7.7mm, ⌀14.0 mm, black, 300pcs.
FSFTPHDBN14-SET-PA6GF30/PA66HIRHS-BK 156-02427
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) FSFTPHDBN14-SET-PA6GF30/PA66HIRHS-BK 156-02427
Cable marking carrier Helafix, 17.5x7.00mm, transparent, pack=50pcs.
Multi-purpose identification potential: Helafix HC and HCR.
Porovnat
Cable marking carrier Helafix, 17.5x7.00mm, transparent, pack=50pcs.
HC06-17-EVA-CL 525-07173
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pack
Transparent (CL) HC06-17-EVA-CL 525-07173
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable marking carrier Helafix, 17.5x10.00mm, transparent, pack=50pcs.
Multi-purpose identification potential: Helafix HC and HCR.
Porovnat
Cable marking carrier Helafix, 17.5x10.00mm, transparent, pack=50pcs.
HC09-17-EVA-CL 525-10173
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pack
Transparent (CL) HC09-17-EVA-CL 525-10173
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable marking carrier Helafix, 17.5x13.00mm, transparent, pack=50pcs.
Multi-purpose identification potential: Helafix HC and HCR.
Porovnat
Cable marking carrier Helafix, 17.5x13.00mm, transparent, pack=50pcs.
HC12-17-EVA-CL 525-13173
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pack
Transparent (CL) HC12-17-EVA-CL 525-13173
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable marking carrier Helafix, 52.0x19.00mm, transparent, pack=50pcs.
Multi-purpose identification potential: Helafix HC and HCR.
Porovnat
Cable marking carrier Helafix, 52.0x19.00mm, transparent, pack=50pcs.
HC18-52-EVA-CL 525-19523
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pack
Transparent (CL) HC18-52-EVA-CL 525-19523
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable marking carrier Helafix, 70.0x19.00mm, transparent, pack=50pcs.
Multi-purpose identification potential: Helafix HC and HCR.
Porovnat
Cable marking carrier Helafix, 70.0x19.00mm, transparent, pack=50pcs.
HC18-70-EVA-CL 525-19703
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Transparent (CL) HC18-70-EVA-CL 525-19703
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 300x4.7mm, ⌀1.5-85.0mm, black, 200pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 300x4.7mm, ⌀1.5-85.0mm, black, 200pcs.
T80I-PA66W-BK 111-00864
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) T80I-PA66W-BK 111-00864
Cable tie inside serrated, 370x12.5mm, ⌀25.0-100mm, black, 100pcs.
Releasable cable tie REL250-Series.
Porovnat
Cable tie inside serrated, 370x12.5mm, ⌀25.0-100mm, black, 100pcs.
T250X-PA66-BK 111-25102
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T250X-PA66-BK 111-25102
Heat shrink marker, thermal transfer print, ladder-style, 3.0mm/1.1mm, W=12.07mm, white, 4000pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 3.0mm/1.1mm, W=12.07mm, white, 4000pcs.
HST3-1WH-3S-PO-X-WH 553-50211
Porovnat
Přidat do sledovaných položek
4000 pcs.
White (WH) HST3-1WH-3S-PO-X-WH 553-50211
Heat shrink marker, thermal transfer print, ladder-style, 4.5mm/1.6mm, W=48.26mm, white, 10000pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 4.5mm/1.6mm, W=48.26mm, white, 10000pcs.
HST4.8-1.6WH-S-PO-X-WH 553-50213
Porovnat
Přidat do sledovaných položek
10000 pcs.
White (WH) HST4.8-1.6WH-S-PO-X-WH 553-50213
Fixing tie for hole (oval), outside serrated, ⌀1-33mm, black, 500pcs.
One Piece Fixing Tie T50SOSKSFT62x122PT1.7-2.3 for oval holes.
Porovnat
Fixing tie for hole (oval), outside serrated, ⌀1-33mm, black, 500pcs.
OS180SFT712-E-PA66HS-BK 126-00285
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) OS180SFT712-E-PA66HS-BK 126-00285
Fixing tie for hole (round), inside serrated, ⌀1.5-34.0mm, black, 500pcs.
A wide range of arrowhead fixing ties which are suitable for different panel thicknesses and hole diameters.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀1.5-34.0mm, black, 500pcs.
T50SL7-PA66HS-BK 126-00173
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SL7-PA66HS-BK 126-00173
Corrugated tubing, fatigue resistant, nom⌀13mm, OD=13.0mm, ID=9.8mm, black, 50m
HelaGuard HG-HI - Highly Flexible PA12 Corrugated Tubing.
Porovnat
Corrugated tubing, fatigue resistant, nom⌀13mm, OD=13.0mm, ID=9.8mm, black, 50m
HG-HI13-PA12-BK 166-11501
Porovnat
Přidat do sledovaných položek
50 metre
Black (BK) HG-HI13-PA12-BK 166-11501
Fitting for corrugated tubing, nom⌀21mm, PG16, black, 10pcs.
HelaGuard HG-S Straight, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀21mm, PG16, black, 10pcs.
HG21-S-PG16-PA66-BK 166-21014
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG21-S-PG16-PA66-BK 166-21014
Cable tie inside serrated, 105x2.6mm, ⌀2.0-24.0mm, black, 100pcs.
Q-tie cable ties: choose from a wide product range in different sizes.
Porovnat
Cable tie inside serrated, 105x2.6mm, ⌀2.0-24.0mm, black, 100pcs.
Q18R-PA66-BK 109-00030
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) Q18R-PA66-BK 109-00030
Cable tie outside serrated, 100x2.5mm, ⌀1.6-20.0mm, natural, 1000pcs.
Cable Tie T18ROS.
Porovnat
Cable tie outside serrated, 100x2.5mm, ⌀1.6-20.0mm, natural, 1000pcs.
T18ROS-PA66HS-NA 118-00035
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) T18ROS-PA66HS-NA 118-00035
Cable tie outside serrated, 100x2.5mm, ⌀1.6-20.0mm, black, 100pcs.
Outside serrated OS-Series cable tie with smooth surface to the bundle.
Porovnat
Cable tie outside serrated, 100x2.5mm, ⌀1.6-20.0mm, black, 100pcs.
T18ROS-PA66W-BK 118-00125
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T18ROS-PA66W-BK 118-00125
Cable tie outside serrated, 200x4.6mm, ⌀1.6-50.0mm, natural, 100pcs.
Cable Tie T50ROS.
Porovnat
Cable tie outside serrated, 200x4.6mm, ⌀1.6-50.0mm, natural, 100pcs.
T50ROS-PA66HS-NA 118-05059
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) T50ROS-PA66HS-NA 118-05059
Cable tie outside serrated, 200x4.6mm, ⌀1.6-50.0mm, black, 100pcs.
Outside serrated OS-Series cable tie with smooth surface to the bundle.
Porovnat
Cable tie outside serrated, 200x4.6mm, ⌀1.6-50.0mm, black, 100pcs.
T50ROS-PA66W-BK 118-05060
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T50ROS-PA66W-BK 118-05060
Cable tie outside serrated, 200x4.6mm, ⌀1.6-50.0mm, black, 100pcs.
Outside serrated OS-Series cable tie with smooth surface to the bundle.
Porovnat
Cable tie outside serrated, 200x4.6mm, ⌀1.6-50.0mm, black, 100pcs.
T50ROS-PA66W-BK 118-00127
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T50ROS-PA66W-BK 118-00127
Cable tie outside serrated, 200x4.6mm, ⌀1.6-50.0mm, white, 100pcs.
Cable Tie T50ROS.
Porovnat
Cable tie outside serrated, 200x4.6mm, ⌀1.6-50.0mm, white, 100pcs.
T50ROS-PA66V0-WH 118-00065
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) T50ROS-PA66V0-WH 118-00065
Cable tie outside serrated, 150x4.6mm, ⌀1.6-35.0mm, black, 100pcs.
Outside serrations minimize damage to cables, while still providing high tensile strength and low insertion force.
Porovnat
Cable tie outside serrated, 150x4.6mm, ⌀1.6-35.0mm, black, 100pcs.
T50SOS-PA66W-BK 118-05860
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T50SOS-PA66W-BK 118-05860
Cable tie outside serrated, 384x4.6mm, ⌀1.6-110mm, black, 100pcs.
Outside serrated OS-Series cable tie with smooth surface to the bundle.
Porovnat
Cable tie outside serrated, 384x4.6mm, ⌀1.6-110mm, black, 100pcs.
T50LOS-PA66W-BK 118-00129
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T50LOS-PA66W-BK 118-00129
Metal cable clip for edge, ⌀4.1-7.0mm, T=0.75 - 1.25mm, metal, 5000pcs.
Porovnat
Metal cable clip for edge, ⌀4.1-7.0mm, T=0.75 - 1.25mm, metal, 5000pcs.
MSC2LP1-SS304-ML 151-03155
Porovnat
Přidat do sledovaných položek
5000 pcs.
Metal (ML) MSC2LP1-SS304-ML 151-03155
Cable clip for adhesive use/with pipe/tube holder, Dmax=18.0mm
Self adhesive one piece fixing clips RA- & RB-Series.
Porovnat
Cable clip for adhesive use/with pipe/tube holder, Dmax=18.0mm
RA18-PA66-NA 151-13119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) RA18-PA66-NA 151-13119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for screw fixation/with pipe/tube holder, ⌀M8, Dmax=29.0mm
Screwed Ratchet Clamp SRC150M8 for parallel bundling of cables and tubes.
Porovnat
Cable clip for screw fixation/with pipe/tube holder, ⌀M8, Dmax=29.0mm
SRC150M8-PA6GF30-BK 156-02742
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
150
Black (BK) SRC150M8-PA6GF30-BK 156-02742
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 139.7x2.5mm, ⌀1.5-35.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 139.7x2.5mm, ⌀1.5-35.0mm, black, 100pcs.
T18I-PA66W-BK 111-01972
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T18I-PA66W-BK 111-01972
Cable tie inside serrated, 203.2x2.5mm, ⌀1.5-55.0mm, white, 1000pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 203.2x2.5mm, ⌀1.5-55.0mm, white, 1000pcs.
T18L-PA66V0-WH 111-02043
Porovnat
Přidat do sledovaných položek
1000 pcs.
White (WH) T18L-PA66V0-WH 111-02043
Cable tie inside serrated, 205x2.5mm, ⌀1.5-55.0mm, white, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 205x2.5mm, ⌀1.5-55.0mm, white, 100pcs.
T18L-PA66V0-WH 111-01557
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) T18L-PA66V0-WH 111-01557
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22.0mm, natural, 100pcs.
Head design guarantees high tensile strength and a low insertion force.
Porovnat
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22.0mm, natural, 100pcs.
T18R-PA66-NA 112-01819
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) T18R-PA66-NA 112-01819
Cable tie inside serrated, 100.0x2.45mm, ⌀1.5-22.0mm, blue, 100pcs.
Head design guarantees high tensile strength and a low insertion force.
Porovnat
Cable tie inside serrated, 100.0x2.45mm, ⌀1.5-22.0mm, blue, 100pcs.
T18R-PA66-BU 116-01816
Porovnat
Přidat do sledovaných položek
100 pcs.
Blue (BU) T18R-PA66-BU 116-01816
Cable tie inside serrated, 100.0x2.45mm, ⌀1.5-22.0mm, grey, 100pcs.
Head design guarantees high tensile strength and a low insertion force.
Porovnat
Cable tie inside serrated, 100.0x2.45mm, ⌀1.5-22.0mm, grey, 100pcs.
T18R-PA66-GY 116-01818
Porovnat
Přidat do sledovaných položek
100 pcs.
Grey (GY) T18R-PA66-GY 116-01818
Cable tie inside serrated, 330x2.8mm, ⌀1.5-95.0mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 330x2.8mm, ⌀1.5-95.0mm, natural, 100pcs.
T25LL-PA66-NA 111-02619
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) T25LL-PA66-NA 111-02619
Fixing tie for hole (round), inside serrated, ⌀100.0mm, black, 100pcs.
T120IFT9
Porovnat
Fixing tie for hole (round), inside serrated, ⌀100.0mm, black, 100pcs.
T150RFT9-PA66HS/PA66HIRHS-BK 156-00845
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T150RFT9-PA66HS/PA66HIRHS-BK 156-00845
Cable tie mount for adhesive use, Wmax=4.1mm, ⌀3.1 mm, Adhesive, black, 100pcs.
4-way cable tie entry for more installation options.
Porovnat
Cable tie mount for adhesive use, Wmax=4.1mm, ⌀3.1 mm, Adhesive, black, 100pcs.
MB3A-PA66-BK 151-28320
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) MB3A-PA66-BK 151-28320
Cable tie mount for screw fixation, Wmax=4.1mm, ⌀3.1 mm, white, 100pcs.
MB-Series Mounts with square design / self-adhesive, screwable.
Porovnat
Cable tie mount for screw fixation, Wmax=4.1mm, ⌀3.1 mm, white, 100pcs.
MB3-PA66-WH 151-28359
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) MB3-PA66-WH 151-28359
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.4mm, ⌀4.0 mm, white, 100pcs.
4-way cable tie entry for more installation options.
Porovnat
Cable tie mount for screw fixation, Wmax=5.4mm, ⌀4.0 mm, white, 100pcs.
MB4-PA66-WH 151-28479
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) MB4-PA66-WH 151-28479
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=2.5mm, ⌀3.7 mm, M3 Screw, natural, 500pcs.
FH Cable Tie Mounts for areas with limited space.
Porovnat
Cable tie mount for screw fixation, Wmax=2.5mm, ⌀3.7 mm, M3 Screw, natural, 500pcs.
FH18-PA66-NA 151-61119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
500 pcs.
Natural (NA) FH18-PA66-NA 151-61119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=3.5mm, ⌀5.5 mm, natural, 500pcs.
FH Cable Tie Mounts for areas with limited space.
Porovnat
Cable tie mount for screw fixation, Wmax=3.5mm, ⌀5.5 mm, natural, 500pcs.
FH30-PA66-NA 151-61319
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
500 pcs.
Natural (NA) FH30-PA66-NA 151-61319
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀5.5 mm, M4 Screw, black, 100pcs.
Porovnat
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀5.5 mm, M4 Screw, black, 100pcs.
LKC-PA66-BK 151-27010
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) LKC-PA66-BK 151-27010
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=6.4mm, ⌀4.5 mm, M4 Screw, blue, 100pcs.
MCKR Mount, screwable, detectable.
Porovnat
Cable tie mount for screw fixation, Wmax=6.4mm, ⌀4.5 mm, M4 Screw, blue, 100pcs.
MCKR6G5-PA66MD-BU 151-00950
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Blue (BU) MCKR6G5-PA66MD-BU 151-00950
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie tool for 2.5 - 4.8mm, manual, 0.279kg, blue
Porovnat
Cable tie tool for 2.5 - 4.8mm, manual, 0.279kg, blue
EVO7iSP-MET/PL-BU 110-77002
Porovnat
Přidat do sledovaných položek
1 pcs.
Blue (BU) EVO7iSP-MET/PL-BU 110-77002
Cable tie tool for 4.6-13.5mm, electrical, 1.149kg, blue
Porovnat
Cable tie tool for 4.6-13.5mm, electrical, 1.149kg, blue
ProCut 9 no battery-MET/PL-BU 104-10010
Porovnat
Přidat do sledovaných položek
1 pcs.
Blue (BU) ProCut 9 no battery-MET/PL-BU 104-10010
Cable tie tool for 4.6-13.5mm, electrical, 5.612kg, blue
ProCut: battery-powered application tool for cable tying in heavy-duty.
Porovnat
Cable tie tool for 4.6-13.5mm, electrical, 5.612kg, blue
ProCut_Battery_Set-MET/PL-BU 104-11000
Porovnat
Přidat do sledovaných položek
1 pc.
Blue (BU) ProCut_Battery_Set-MET/PL-BU 104-11000
Label, durable/UV resistant, silver, thermal transfer print, 18x35mm, 1000pcs.
Helatag 1221 Series, silver panel plate labels.
Porovnat
Label, durable/UV resistant, silver, thermal transfer print, 18x35mm, 1000pcs.
TAG35-18TDK1-1221-SR 596-00580
Porovnat
Přidat do sledovaných položek
1000 reel
Silver (SR) TAG35-18TDK1-1221-SR 596-00580
Cable label, self laminating, Refill pack, self-laminating/chemical resistance, blue/transparent, manual marking, 12.70x19.05mm, H2=50.80mm, 150pcs.
Refill packs for RiteOn label dispenser.
Porovnat
Cable label, self laminating, Refill pack, self-laminating/chemical resistance, blue/transparent, manual marking, 12.70x19.05mm, H2=50.80mm, 150pcs.
RO202REF-1401-BU/CL 550-61401
Porovnat
Přidat do sledovaných položek
150 pack
Blue (BU), Transparent (CL) RO202REF-1401-BU/CL 550-61401
Cable tie inside serrated, 305x4.7mm, ⌀1.5-85.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 305x4.7mm, ⌀1.5-85.0mm, black, 100pcs.
T80I-PA66W-BK 111-01694
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T80I-PA66W-BK 111-01694
Stainless steel cable tie, ball bearing lock, 521x7.9mm, ⌀17-152mm, black, 50pcs.
Stainless steel cable ties, coated, MBT_SFC, MBT_HFC.
Porovnat
Stainless steel cable tie, ball bearing lock, 521x7.9mm, ⌀17-152mm, black, 50pcs.
MBT20HFC-SS316L/SP-BK 111-00296
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) MBT20HFC-SS316L/SP-BK 111-00296
Heat shrink marker, thermal transfer print, ladder-style, 3.0mm/1.1mm, W=24.13mm, white, 2000pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 3.0mm/1.1mm, W=24.13mm, white, 2000pcs.
HST3-1WH-S-PO-X-WH 553-50074
Porovnat
Přidat do sledovaných položek
2000 pack
White (WH) HST3-1WH-S-PO-X-WH 553-50074
Heat shrink marker, thermal transfer print, ladder-style, 3.0mm/1.1mm, W=16.0mm, yellow, 3000pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 3.0mm/1.1mm, W=16.0mm, yellow, 3000pcs.
HST3-1YE-2S-PO-X-YE 553-50077
Porovnat
Přidat do sledovaných položek
3000 pack
Yellow (YE) HST3-1YE-2S-PO-X-YE 553-50077
Heat shrink marker, thermal transfer print, ladder-style, 3.0mm/1.1mm, W=48.26mm, white, 2500pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 3.0mm/1.1mm, W=48.26mm, white, 2500pcs.
HST3-1WH-PO-X-WH 553-50078
Porovnat
Přidat do sledovaných položek
2500 pack
White (WH) HST3-1WH-PO-X-WH 553-50078
Heat shrink marker, thermal transfer print, ladder-style, 3.0mm/1.1mm, W=12.07mm, white, 4000pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 3.0mm/1.1mm, W=12.07mm, white, 4000pcs.
HST3-1WH-3S-PO-X-WH 553-50088
Porovnat
Přidat do sledovaných položek
4000 pack
White (WH) HST3-1WH-3S-PO-X-WH 553-50088
Heat shrink marker, thermal transfer print, ladder-style, 3.0mm/1.1mm, W=48.0mm, white, 8000pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 3.0mm/1.1mm, W=48.0mm, white, 8000pcs.
HST3-1WH-PO-X-WH 553-50194
Porovnat
Přidat do sledovaných položek
8000 pcs.
White (WH) HST3-1WH-PO-X-WH 553-50194
Heat shrink marker, thermal transfer print, ladder-style, 4.5mm/1.6mm, W=48.26mm, white, 5000pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 4.5mm/1.6mm, W=48.26mm, white, 5000pcs.
HST4.8-1.6WH-PO-X-WH 553-50079
Porovnat
Přidat do sledovaných položek
5000 pack
White (WH) HST4.8-1.6WH-PO-X-WH 553-50079
Heat shrink marker, thermal transfer print, ladder-style, 4.5mm/1.6mm, W=24.13mm, white, 2000pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 4.5mm/1.6mm, W=24.13mm, white, 2000pcs.
HST4.8-1.6WH-S-PO-X-WH 553-50080
Porovnat
Přidat do sledovaných položek
2000 pack
White (WH) HST4.8-1.6WH-S-PO-X-WH 553-50080
Heat shrink marker, thermal transfer print, ladder-style, 4.5mm/1.6mm, W=12.07mm, white, 4000pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 4.5mm/1.6mm, W=12.07mm, white, 4000pcs.
HST4.8-1.6WH-3S-PO-X-WH 553-50081
Porovnat
Přidat do sledovaných položek
4000 pack
White (WH) HST4.8-1.6WH-3S-PO-X-WH 553-50081
Heat shrink marker, thermal transfer print, ladder-style, 4.5mm/1.6mm, W=48.26mm, white, 3000pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 4.5mm/1.6mm, W=48.26mm, white, 3000pcs.
HST4.8-1.6WH-PO-X-WH 553-50177
Porovnat
Přidat do sledovaných položek
3000 pcs.
White (WH) HST4.8-1.6WH-PO-X-WH 553-50177
Heat shrink marker, thermal transfer print, ladder-style, 4.5mm/1.6mm, W=48.26mm, white, 6400pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 4.5mm/1.6mm, W=48.26mm, white, 6400pcs.
HST4.8-1.6WH-PO-X-WH 553-50195
Porovnat
Přidat do sledovaných položek
6400 pcs.
White (WH) HST4.8-1.6WH-PO-X-WH 553-50195
Fixing tie for hole (oval), outside serrated, ⌀1.6-30mm, natural, 500pcs.
One Piece Fixing Tie T50SOSKSFT62x122PT1.7-2.3 for oval holes.
Porovnat
Fixing tie for hole (oval), outside serrated, ⌀1.6-30mm, natural, 500pcs.
T60SOSSFT65x130-E-PA66HS-NA 126-00157
Porovnat
Přidat do sledovaných položek
500 pcs.
Natural (NA) T60SOSSFT65x130-E-PA66HS-NA 126-00157
Fixing tie for hole (round), outside serrated, ⌀3.0-30.0mm, natural, 100pcs.
Porovnat
Fixing tie for hole (round), outside serrated, ⌀3.0-30.0mm, natural, 100pcs.
OS150-PM6-WPJ-PA66-NA 126-00071
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) OS150-PM6-WPJ-PA66-NA 126-00071
Fixing tie for hole (round), inside serrated, ⌀1.5-34.0mm, natural, 500pcs.
A wide range of arrowhead fixing ties which are suitable for different panel thicknesses and hole diameters.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀1.5-34.0mm, natural, 500pcs.
T50SL7-PA66-NA 126-00189
Porovnat
Přidat do sledovaných položek
500 pcs.
Natural (NA) T50SL7-PA66-NA 126-00189
Fixing tie for hole (round), inside serrated, ⌀1.5-26.0mm, black, 100pcs.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀1.5-26.0mm, black, 100pcs.
T50SSF-PA66W-BK 126-00056
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T50SSF-PA66W-BK 126-00056
Cable grommet, ⌀10.0 mm, black, 1000pcs.
Edge Protection Grommet - HV1218.
Porovnat
Cable grommet, ⌀10.0 mm, black, 1000pcs.
HV1218-PVC-FR-BK 633-02180
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) HV1218-PVC-FR-BK 633-02180
Facebook  Instagram  Twitter  YouTube  LinkedIn  Corporate Blog 
Kontakt VOP Impressum Mapa stránek Newsletter Pokyny a závazky Zásady ochrany osobních údajů
Aktualizace: 14/12/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.293.3) | Aktualizace: 14/12/2025 | Nastavení ochrany osobních údajů
Hledat prodejce Kontakt