Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
02/05/2025

Výsledky pro "wind energy sector"

Nalezeno 2 947 výrobků 2 dalších položek
K dispozici jsou výsledky v následujících kategoriích:
Cable Ties and Fixings

Cable Ties and Fixings  (1028)

Cable Ties Inside Serrated  (300) Cable Ties Outside Serrated  (34) Cable Ties Without Serration  (26) Cable Ties, Releasable  (49) Cable Ties, Stainless Steel  (75) Cable Ties With Fixing Elements  (123) Cable Tie Mounts  (123) Fixing Elements  (37) Clips, Clamps and Plugs  (285)
Cable Ties and Fixings
Cable Ties and Fixings (1028)
Insulation

Insulation  (325)

Heat Shrink Tubing  (321) Heat Shrinkable Moulded Shapes  (5)
Insulation
Insulation (325)
Cable Protection Systems

Cable Protection Systems  (180)

Non-Metallic Conduit Systems  (7) Metallic Conduit Systems  (75) Conduit System Accessories  (12) Protective Tubing and Spiral Binding  (76) Expandable Braided Sleeves  (2) Open Woven Sleeves  (6) Edge Protection  (1) Wiring Ducts and Accessories  (2)
Cable Protection Systems
Cable Protection Systems (180)
Electrical Installation

Electrical Installation  (269)

Electrical Tapes  (91) Cast Resin Technology  (80) Gel Technology  (2) Cable Entry Systems  (96)
Electrical Installation
Electrical Installation (269)
Identification Systems

Identification Systems  (1024)

Wire and Cable Markers  (734) Control Panel Labelling  (127) Industrial Identification  (227) RFID tags and cable ties  (56) Security Labeling  (13) Hazardous Area Identification  (10) Printers and Software  (23)
Identification Systems
Identification Systems (1024)
Application Tooling

Application Tooling  (58)

Automatic Cable Tying System  (24) Application Tooling for Cable Ties  (24) Application Tooling for Snappers  (2) Application Tooling for Heat Shrinkable Tubing  (5) Application Tooling for Non Shrinkable Tubing  (2) Application Tooling for Braided Sleeves  (1)
Application Tooling
Application Tooling (58)
Connectivity

Connectivity  (63)

Cable  (63)
Connectivity
Connectivity (63)
2 947 produkty
Resetovat vše
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.
ALU15C-AL/CR-BK 211-15150
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU15C-AL/CR-BK 211-15150
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.
ALU6C-AL/CR-BK 211-15060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU6C-AL/CR-BK 211-15060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.
ALU7C-AL/CR-BK 211-15070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU7C-AL/CR-BK 211-15070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.
ALU8C-AL/CR-BK 211-15080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU8C-AL/CR-BK 211-15080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.
ALU9C-AL/CR-BK 211-15090
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU9C-AL/CR-BK 211-15090
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Cable tie mount for adhesive use, Wmax=13mm, black, 100Bag
PMB8 paste adhesive mount for fixing with paste/liquid adhesive.
Porovnat
Cable tie mount for adhesive use, Wmax=13mm, black, 100Bag
PMB8-PA66/6HIRHS-BK 151-03196
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) PMB8-PA66/6HIRHS-BK 151-03196
LTS Galvanised Steel Conduit with PVC Cover grey ø16mm reel 25m
HelaGuard LTS - PVC Coated Liquid Tight Galvanized Steel Conduit.
Porovnat
LTS Galvanised Steel Conduit with PVC Cover grey ø16mm reel 25m
LTS16-GS/PVC-GY 166-31917
Porovnat
Přidat do sledovaných položek
25 metre
Grey (GY) LTS16-GS/PVC-GY 166-31917
LTS Galvanised Steel Conduit with PVC Cover grey ø20mm reel 25m
HelaGuard LTS - PVC Coated Liquid Tight Galvanized Steel Conduit.
Porovnat
LTS Galvanised Steel Conduit with PVC Cover grey ø20mm reel 25m
LTS20-GS/PVC-GY 166-31918
Porovnat
Přidat do sledovaných položek
25 metre
Grey (GY) LTS20-GS/PVC-GY 166-31918
LTS Galvanised Steel Conduit with PVC Cover grey ø25mm reel 25m
HelaGuard LTS - PVC Coated Liquid Tight Galvanized Steel Conduit.
Porovnat
LTS Galvanised Steel Conduit with PVC Cover grey ø25mm reel 25m
LTS25-GS/PVC-GY 166-31919
Porovnat
Přidat do sledovaných položek
25 metre
Grey (GY) LTS25-GS/PVC-GY 166-31919
Fixed Thread Compression Fitting IP68 ø10mm M16
HelaGuard LTS-FMC Compression Fitting.
Porovnat
Fixed Thread Compression Fitting IP68 ø10mm M16
LTS10-FMC-M16-NPB/PA6-ML 166-32201
Porovnat
Přidat do sledovaných položek
10 pcs.
Metal (ML) LTS10-FMC-M16-NPB/PA6-ML 166-32201
Fixed Thread Compression Fitting IP68 ø63mm M63
HelaGuard LTS-FMC Compression Fitting.
Porovnat
Fixed Thread Compression Fitting IP68 ø63mm M63
LTS63-FMC-M63-NPB/PA6-ML 166-32211
Porovnat
Přidat do sledovaných položek
1 pcs.
Metal (ML) LTS63-FMC-M63-NPB/PA6-ML 166-32211
Elbow Compression Fitting 90° IP68 ø16mm M16
HelaGuard LTS-90FMC 90° Elbow Compression Fitting.
Porovnat
Elbow Compression Fitting 90° IP68 ø16mm M16
LTS16-90FMC-M16-NPB/PA6-ML 166-32401
Porovnat
Přidat do sledovaných položek
10 pcs.
Metal (ML) LTS16-90FMC-M16-NPB/PA6-ML 166-32401
Elbow Compression Fitting 90° IP68 ø16mm M20
HelaGuard LTS-90FMC 90° Elbow Compression Fitting.
Porovnat
Elbow Compression Fitting 90° IP68 ø16mm M20
LTS16-90FMC-M20-NPB/PA6-ML 166-32402
Porovnat
Přidat do sledovaných položek
10 pcs.
Metal (ML) LTS16-90FMC-M20-NPB/PA6-ML 166-32402
Elbow Compression Fitting 90° IP68 ø20mm M20
HelaGuard LTS-90FMC 90° Elbow Compression Fitting.
Porovnat
Elbow Compression Fitting 90° IP68 ø20mm M20
LTS20-90FMC-M20-NPB/PA6-ML 166-32403
Porovnat
Přidat do sledovaných položek
10 pcs.
Metal (ML) LTS20-90FMC-M20-NPB/PA6-ML 166-32403
Elbow Compression Fitting 90° IP68 ø25mm M25
HelaGuard LTS-90FMC 90° Elbow Compression Fitting.
Porovnat
Elbow Compression Fitting 90° IP68 ø25mm M25
LTS25-90FMC-M25-NPB/PA6-ML 166-32404
Porovnat
Přidat do sledovaných položek
10 pcs.
Metal (ML) LTS25-90FMC-M25-NPB/PA6-ML 166-32404
Elbow Compression Fitting 90° IP68 ø32mm M32
HelaGuard LTS-90FMC 90° Elbow Compression Fitting.
Porovnat
Elbow Compression Fitting 90° IP68 ø32mm M32
LTS32-90FMC-M32-NPB/PA6-ML 166-32405
Porovnat
Přidat do sledovaných položek
2 pcs.
Metal (ML) LTS32-90FMC-M32-NPB/PA6-ML 166-32405
Elbow Compression Fitting 45° IP68 ø16mm M20
HelaGuard LTS-45FMC 45° Elbow Compression Fitting.
Porovnat
Elbow Compression Fitting 45° IP68 ø16mm M20
LTS16-45FMC-M20-NPB/PA6-ML 166-32500
Porovnat
Přidat do sledovaných položek
10 pcs.
Metal (ML) LTS16-45FMC-M20-NPB/PA6-ML 166-32500
Elbow Compression Fitting 45° IP68 ø25mm M25
HelaGuard LTS-45FMC 45° Elbow Compression Fitting.
Porovnat
Elbow Compression Fitting 45° IP68 ø25mm M25
LTS25-45FMC-M25-NPB/PA6-ML 166-32502
Porovnat
Přidat do sledovaných položek
10 pcs.
Metal (ML) LTS25-45FMC-M25-NPB/PA6-ML 166-32502
Elbow Compression Fitting 45° IP68 ø40mm M40
HelaGuard LTS-45FMC 45° Elbow Compression Fitting.
Porovnat
Elbow Compression Fitting 45° IP68 ø40mm M40
LTS40-45FMC-M40-NPB/PA6-ML 166-32504
Porovnat
Přidat do sledovaných položek
1 pcs.
Metal (ML) LTS40-45FMC-M40-NPB/PA6-ML 166-32504
Elbow Compression Fitting 45° IP68 ø50mm M50
HelaGuard LTS-45FMC 45° Elbow Compression Fitting.
Porovnat
Elbow Compression Fitting 45° IP68 ø50mm M50
LTS50-45FMC-M50-NPB/PA6-ML 166-32505
Porovnat
Přidat do sledovaných položek
1 pcs.
Metal (ML) LTS50-45FMC-M50-NPB/PA6-ML 166-32505
Elbow Compression Fitting 45° IP68 ø63mm M63
HelaGuard LTS-45FMC 45° Elbow Compression Fitting.
Porovnat
Elbow Compression Fitting 45° IP68 ø63mm M63
LTS63-45FMC-M63-NPB/PA6-ML 166-32506
Porovnat
Přidat do sledovaných položek
1 pcs.
Metal (ML) LTS63-45FMC-M63-NPB/PA6-ML 166-32506
RFID cable tie, 13.56 MHz (HF), 200x4.6mm, ⌀1.5-50mm, blue, 100pcs.
Cable tie complete with RFID transponder.
Porovnat
RFID cable tie, 13.56 MHz (HF), 200x4.6mm, ⌀1.5-50mm, blue, 100pcs.
T50RFIDCHA-PA66-BU 111-01677
Porovnat
Přidat do sledovaných položek
100 pcs.
Light Blue (LTBU) T50RFIDCHA-PA66-BU 111-01677
RFID cable tie, 13.56 MHz (HF), 200x4.6mm, ⌀1.5-50mm, green, 100pcs.
Cable tie complete with RFID transponder.
Porovnat
RFID cable tie, 13.56 MHz (HF), 200x4.6mm, ⌀1.5-50mm, green, 100pcs.
T50RFIDCHA-PA66-GN 111-01796
Porovnat
Přidat do sledovaných položek
100 pcs.
Fluorescent Green (FLGN) T50RFIDCHA-PA66-GN 111-01796
RFID label, 13.56 MHz (HF), white, 30.00x30.00mm, 3500pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Porovnat
RFID label, 13.56 MHz (HF), white, 30.00x30.00mm, 3500pcs.
TAGS30T1HF-1601-WH 556-00827
Porovnat
Přidat do sledovaných položek
3500 pcs.
White (WH) TAGS30T1HF-1601-WH 556-00827
RFID label, 13.56 MHz (HF), white, 40.00x40.00mm, 3000pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Porovnat
RFID label, 13.56 MHz (HF), white, 40.00x40.00mm, 3000pcs.
TAGS40T1HF-1601-WH 556-00831
Porovnat
Přidat do sledovaných položek
3000 pcs.
White (WH) TAGS40T1HF-1601-WH 556-00831
RFID label, 13.56 MHz (HF), white, ⌀31.00mm, 3500pcs.
RFID adhesive label – tamper-proof unique identification.
Porovnat
RFID label, 13.56 MHz (HF), white, ⌀31.00mm, 3500pcs.
TAGD31T1HFT-1601-WH 556-00819
Porovnat
Přidat do sledovaných položek
3500 pcs.
White (WH) TAGD31T1HFT-1601-WH 556-00819
RFID label, 13.56 MHz (HF), white, ⌀40.00mm, 3000pcs.
RFID adhesive label – tamper-proof unique identification.
Porovnat
RFID label, 13.56 MHz (HF), white, ⌀40.00mm, 3000pcs.
TAGD40T1HFT-1601-WH 556-00824
Porovnat
Přidat do sledovaných položek
3000 pcs.
White (WH) TAGD40T1HFT-1601-WH 556-00824
RFID label, 13.56 MHz (HF), white, 30.00x30.00mm, 3500pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Porovnat
RFID label, 13.56 MHz (HF), white, 30.00x30.00mm, 3500pcs.
TAGS30T1HFT-1601-WH 556-00828
Porovnat
Přidat do sledovaných položek
3500 pcs.
White (WH) TAGS30T1HFT-1601-WH 556-00828
RFID label, 13.56 MHz (HF), white, 40.00x40.00mm, 3000pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Porovnat
RFID label, 13.56 MHz (HF), white, 40.00x40.00mm, 3000pcs.
TAGS40T1HFT-1601-WH 556-00832
Porovnat
Přidat do sledovaných položek
3000 pcs.
White (WH) TAGS40T1HFT-1601-WH 556-00832
RFID label, 13.56 MHz (HF), white, ⌀31.00mm, 2500pcs.
RFID adhesive label – tamper-proof unique identification.
Porovnat
RFID label, 13.56 MHz (HF), white, ⌀31.00mm, 2500pcs.
TAGD31T1HFM-1601-WH 556-00820
Porovnat
Přidat do sledovaných položek
2500 pcs.
White (WH) TAGD31T1HFM-1601-WH 556-00820
RFID label, 13.56 MHz (HF), white, ⌀40.00mm, 2000pcs.
RFID adhesive label – tamper-proof unique identification.
Porovnat
RFID label, 13.56 MHz (HF), white, ⌀40.00mm, 2000pcs.
TAGD40T1HFM-1601-WH 556-00825
Porovnat
Přidat do sledovaných položek
2000 pcs.
White (WH) TAGD40T1HFM-1601-WH 556-00825
RFID label, 13.56 MHz (HF), white, 30.00x30.00mm, 2500pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Porovnat
RFID label, 13.56 MHz (HF), white, 30.00x30.00mm, 2500pcs.
TAGS30T1HFM-1601-WH 556-00829
Porovnat
Přidat do sledovaných položek
2500 pcs.
White (WH) TAGS30T1HFM-1601-WH 556-00829
RFID label, 13.56 MHz (HF), white, 40.00x40.00mm, 2000pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Porovnat
RFID label, 13.56 MHz (HF), white, 40.00x40.00mm, 2000pcs.
TAGS40T1HFM-1601-WH 556-00833
Porovnat
Přidat do sledovaných položek
2000 pcs.
White (WH) TAGS40T1HFM-1601-WH 556-00833
RFID label, 13.56 MHz (HF), white, ⌀31.00mm, 2500pcs.
RFID adhesive label – tamper-proof unique identification.
Porovnat
RFID label, 13.56 MHz (HF), white, ⌀31.00mm, 2500pcs.
TAGD31T1HFTM-1601-WH 556-00821
Porovnat
Přidat do sledovaných položek
2500 pcs.
White (WH) TAGD31T1HFTM-1601-WH 556-00821
RFID label, 13.56 MHz (HF), white, 30.00x30.00mm, 2500pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Porovnat
RFID label, 13.56 MHz (HF), white, 30.00x30.00mm, 2500pcs.
TAGS30T1HFTM-1601-WH 556-00830
Porovnat
Přidat do sledovaných položek
2500 pcs.
White (WH) TAGS30T1HFTM-1601-WH 556-00830
RFID label, 13.56 MHz (HF), white, 40.00x40.00mm, 2000pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Porovnat
RFID label, 13.56 MHz (HF), white, 40.00x40.00mm, 2000pcs.
TAGS40T1HFTM-1601-WH 556-00834
Porovnat
Přidat do sledovaných položek
2000 pcs.
White (WH) TAGS40T1HFTM-1601-WH 556-00834
RFID hard tag, 13.56 MHz (HF), bolt-on, ⌀34.00mm, H=8.00mm, yellow, 200pcs.
RFID HardTag - for applications where a RFID cable tie solution is not suitable.
Porovnat
RFID hard tag, 13.56 MHz (HF), bolt-on, ⌀34.00mm, H=8.00mm, yellow, 200pcs.
RFID_HTAG_DISC_PA34-PA6GF30-YE 556-00861
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
200 pcs.
Yellow (YE) RFID_HTAG_DISC_PA34-PA6GF30-YE 556-00861
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Label, white, thermal transfer print, 18.0mm, 25m
Helatag 1220 Series, white panel plate labels.
Porovnat
Label, white, thermal transfer print, 18.0mm, 25m
TAGR18TDK1-1220-WH 596-00760
Porovnat
Přidat do sledovaných položek
25 metre
White (WH) TAGR18TDK1-1220-WH 596-00760
Label, white, thermal transfer print, 40.0mm, 25m
Helatag 1220 Series, white panel plate labels.
Porovnat
Label, white, thermal transfer print, 40.0mm, 25m
TAGR40TDK1-1220-WH 596-00761
Porovnat
Přidat do sledovaných položek
25 metre
White (WH) TAGR40TDK1-1220-WH 596-00761
Label, white, thermal transfer print, 9x17mm, 1000pcs.
Helatag 1220 Series, white panel plate labels.
Porovnat
Label, white, thermal transfer print, 9x17mm, 1000pcs.
TAG17-09TDK1-1220-WH 596-00592
Porovnat
Přidat do sledovaných položek
1000 pcs.
White (WH) TAG17-09TDK1-1220-WH 596-00592
Label, white, thermal transfer print, 15.00x49.00mm, 1000pcs.
Helatag 1220 Series, white panel plate labels.
Porovnat
Label, white, thermal transfer print, 15.00x49.00mm, 1000pcs.
TAG49-15TDK1-1220-WH 596-12622
Porovnat
Přidat do sledovaných položek
1000 pcs.
White (WH) TAG49-15TDK1-1220-WH 596-12622
Label, white, thermal transfer print, 12.00x18.00mm, 1000pcs.
Helatag 1220 Series, white panel plate labels.
Porovnat
Label, white, thermal transfer print, 12.00x18.00mm, 1000pcs.
TAG18-12TDK1-1220-WH 596-01070
Porovnat
Přidat do sledovaných položek
1000 reel
White (WH) TAG18-12TDK1-1220-WH 596-01070
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-19.0mm, black, 100pcs.
Head design guarantees high tensile strength and a low insertion force.
Porovnat
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-19.0mm, black, 100pcs.
T18R-PP-BK 111-01917
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>ReSource highlights HellermannTyton products that are made from reccled waste or from virgin materials with relatively lower carbon emissions.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T18R-PP-BK 111-01917
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>ReSource highlights HellermannTyton products that are made from reccled waste or from virgin materials with relatively lower carbon emissions.
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-19.0mm, natural, 1000pcs.
Head design guarantees high tensile strength and a low insertion force.
Porovnat
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-19.0mm, natural, 1000pcs.
T18R-PP-NA 111-01922
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>ReSource highlights HellermannTyton products that are made from reccled waste or from virgin materials with relatively lower carbon emissions.
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) T18R-PP-NA 111-01922
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>ReSource highlights HellermannTyton products that are made from reccled waste or from virgin materials with relatively lower carbon emissions.
Thermal transfer printer with RFID, desktop, 300dpi, black
Print and program your RFID tags with the UHF RFID printer PT4000.
Porovnat
Thermal transfer printer with RFID, desktop, 300dpi, black
PT4000-MET-BK 556-00750
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) PT4000-MET-BK 556-00750
Corrugated tube clip, black, 250pcs.
The cable guide standoff stands off bundles from frame rails, providing clearance from bolts and other protrusions for protection against abrasion.
Porovnat
Corrugated tube clip, black, 250pcs.
CGS1-PA66HIRHSUV-BK 151-00006
Porovnat
Přidat do sledovaných položek
250 pcs.
Black (BK) CGS1-PA66HIRHSUV-BK 151-00006
Cable tie mount for adhesive use, Wmax=10.0mm, ⌀4.7 mm, black, 100pcs.
SolidTack Family with special adhesive.
Porovnat
Cable tie mount for adhesive use, Wmax=10.0mm, ⌀4.7 mm, black, 100pcs.
MB5APT-A-PA66-BK 151-02247
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) MB5APT-A-PA66-BK 151-02247
Cable tie mount for adhesive use, Wmax=5.6mm, ⌀4.0 mm, black, 100pcs.
SolidTack Family with special adhesive.
Porovnat
Cable tie mount for adhesive use, Wmax=5.6mm, ⌀4.0 mm, black, 100pcs.
MB4A-PT1100-PA66-BK 151-01193
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) MB4A-PT1100-PA66-BK 151-01193
Cable tie mount for adhesive use, Wmax=4.4mm, ⌀3.1 mm, white, 100pcs.
SolidTack Family with special adhesive.
Porovnat
Cable tie mount for adhesive use, Wmax=4.4mm, ⌀3.1 mm, white, 100pcs.
MB3APT-A-PA66-WH 151-02978
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) MB3APT-A-PA66-WH 151-02978
Cable tie mount for adhesive use, Wmax=2.7mm, black, 100pcs.
SolidTack Family with special adhesive.
Porovnat
Cable tie mount for adhesive use, Wmax=2.7mm, black, 100pcs.
MB2APT-A-PA66-BK 151-02243
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) MB2APT-A-PA66-BK 151-02243
Cable tie mount for adhesive use, Wmax=5.6mm, ⌀4.0 mm, white, 100pcs.
SolidTack Mount MB4APT with special adhesive.
Porovnat
Cable tie mount for adhesive use, Wmax=5.6mm, ⌀4.0 mm, white, 100pcs.
MB4APT-A-PA66-WH 151-02246
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) MB4APT-A-PA66-WH 151-02246
LTSH Galvanised Steel Conduit with Thermoplastic Cover black ø50mm reel 10m
HelaGuard LTSH.
Porovnat
LTSH Galvanised Steel Conduit with Thermoplastic Cover black ø50mm reel 10m
LTSH50-GS/TPR-BK 166-32007
Porovnat
Přidat do sledovaných položek
10 metre
Black (BK) LTSH50-GS/TPR-BK 166-32007
Fixed Thread Compression Fitting IP68 ø10mm M12
HelaGuard LTS-FMC Compression Fitting.
Porovnat
Fixed Thread Compression Fitting IP68 ø10mm M12
LTS10-FMC-M12-NPB/PA6-ML 166-32200
Porovnat
Přidat do sledovaných položek
10 pcs.
Metal (ML) LTS10-FMC-M12-NPB/PA6-ML 166-32200
Fixed Thread Compression Fitting IP68 ø12mm M16
HelaGuard LTS-FMC Compression Fitting.
Porovnat
Fixed Thread Compression Fitting IP68 ø12mm M16
LTS12-FMC-M16-NPB/PA6-ML 166-32203
Porovnat
Přidat do sledovaných položek
10 pcs.
Metal (ML) LTS12-FMC-M16-NPB/PA6-ML 166-32203
Fixed Thread Compression Fitting IP68 ø16mm M16
HelaGuard LTS-FMC Compression Fitting.
Porovnat
Fixed Thread Compression Fitting IP68 ø16mm M16
LTS16-FMC-M16-NPB/PA6-ML 166-32204
Porovnat
Přidat do sledovaných položek
10 pcs.
Metal (ML) LTS16-FMC-M16-NPB/PA6-ML 166-32204
Fixed Thread Compression Fitting IP68 ø16mm M20
HelaGuard LTS-FMC Compression Fitting.
Porovnat
Fixed Thread Compression Fitting IP68 ø16mm M20
LTS16-FMC-M20-NPB/PA6-ML 166-32205
Porovnat
Přidat do sledovaných položek
10 pcs.
Metal (ML) LTS16-FMC-M20-NPB/PA6-ML 166-32205
Fixed Thread Compression Fitting IP68 ø16mm PG11
HelaGuard LTS-FMC Compression Fitting.
Porovnat
Fixed Thread Compression Fitting IP68 ø16mm PG11
LTS16-FMC-PG11-NPB/PA6-ML 166-32212
Porovnat
Přidat do sledovaných položek
10 pcs.
Metal (ML) LTS16-FMC-PG11-NPB/PA6-ML 166-32212
Fixed Thread Compression Fitting IP68 ø20mm M20
HelaGuard LTS-FMC Compression Fitting.
Porovnat
Fixed Thread Compression Fitting IP68 ø20mm M20
LTS20-FMC-M20-NPB/PA6-ML 166-32206
Porovnat
Přidat do sledovaných položek
10 pcs.
Metal (ML) LTS20-FMC-M20-NPB/PA6-ML 166-32206
Fixed Thread Compression Fitting IP68 ø20mm PG16
HelaGuard LTS-FMC Compression Fitting.
Porovnat
Fixed Thread Compression Fitting IP68 ø20mm PG16
LTS20-FMC-PG16-NPB/PA6-ML 166-32213
Porovnat
Přidat do sledovaných položek
10 pcs.
Metal (ML) LTS20-FMC-PG16-NPB/PA6-ML 166-32213
Fixed Thread Compression Fitting IP68 ø25mm PG21
HelaGuard LTS-FMC Compression Fitting.
Porovnat
Fixed Thread Compression Fitting IP68 ø25mm PG21
LTS25-FMC-PG21-NPB/PA6-ML 166-32214
Porovnat
Přidat do sledovaných položek
10 pcs.
Metal (ML) LTS25-FMC-PG21-NPB/PA6-ML 166-32214
Fixed Thread Compression Fitting IP68 ø32mm M32
HelaGuard LTS-FMC Compression Fitting.
Porovnat
Fixed Thread Compression Fitting IP68 ø32mm M32
LTS32-FMC-M32-NPB/PA6-ML 166-32208
Porovnat
Přidat do sledovaných položek
2 pcs.
Metal (ML) LTS32-FMC-M32-NPB/PA6-ML 166-32208
Fixed Thread Compression Fitting IP68 ø32mm PG29
HelaGuard LTS-FMC Compression Fitting.
Porovnat
Fixed Thread Compression Fitting IP68 ø32mm PG29
LTS32-FMC-PG29-NPB/PA6-ML 166-32215
Porovnat
Přidat do sledovaných položek
2 pcs.
Metal (ML) LTS32-FMC-PG29-NPB/PA6-ML 166-32215
Fixed Thread Compression Fitting IP68 ø40mm M40
HelaGuard LTS-FMC Compression Fitting.
Porovnat
Fixed Thread Compression Fitting IP68 ø40mm M40
LTS40-FMC-M40-NPB/PA6-ML 166-32209
Porovnat
Přidat do sledovaných položek
1 pcs.
Metal (ML) LTS40-FMC-M40-NPB/PA6-ML 166-32209
Fixed Thread Compression Fitting IP68 ø50mm M50
HelaGuard LTS-FMC Compression Fitting.
Porovnat
Fixed Thread Compression Fitting IP68 ø50mm M50
LTS50-FMC-M50-NPB/PA6-ML 166-32210
Porovnat
Přidat do sledovaných položek
1 pcs.
Metal (ML) LTS50-FMC-M50-NPB/PA6-ML 166-32210
Swivel Thread Compression Fitting IP68 ø12mm M16
HelaGuard LTS-SMC Swivel Compression Fitting.
Porovnat
Swivel Thread Compression Fitting IP68 ø12mm M16
LTS12-SMC-M16-NPB/PA6/PS-ML 166-32300
Porovnat
Přidat do sledovaných položek
10 pcs.
Metal (ML) LTS12-SMC-M16-NPB/PA6/PS-ML 166-32300
Swivel Thread Compression Fitting IP68 ø16mm M20
HelaGuard LTS-SMC Swivel Compression Fitting.
Porovnat
Swivel Thread Compression Fitting IP68 ø16mm M20
LTS16-SMC-M20-NPB/PA6/PS-ML 166-32302
Porovnat
Přidat do sledovaných položek
10 pcs.
Metal (ML) LTS16-SMC-M20-NPB/PA6/PS-ML 166-32302
Swivel Thread Compression Fitting IP68 ø32mm M32
HelaGuard LTS-SMC Swivel Compression Fitting.
Porovnat
Swivel Thread Compression Fitting IP68 ø32mm M32
LTS32-SMC-M32-NPB/PA6/PS-ML 166-32305
Porovnat
Přidat do sledovaných položek
2 pcs.
Metal (ML) LTS32-SMC-M32-NPB/PA6/PS-ML 166-32305
Elbow Compression Fitting 45° IP68 ø20mm M20
HelaGuard LTS-45FMC 45° Elbow Compression Fitting.
Porovnat
Elbow Compression Fitting 45° IP68 ø20mm M20
LTS20-45FMC-M20-NPB/PA6-ML 166-32501
Porovnat
Přidat do sledovaných položek
10 pcs.
Metal (ML) LTS20-45FMC-M20-NPB/PA6-ML 166-32501
Elbow Compression Fitting 45° IP68 ø32mm M32
HelaGuard LTS-45FMC 45° Elbow Compression Fitting.
Porovnat
Elbow Compression Fitting 45° IP68 ø32mm M32
LTS32-45FMC-M32-NPB/PA6-ML 166-32503
Porovnat
Přidat do sledovaných položek
2 pcs.
Metal (ML) LTS32-45FMC-M32-NPB/PA6-ML 166-32503
Fixing tie for hole (round), inside serrated, ⌀1.5-34.0mm, natural, 500pcs.
A wide range of arrowhead fixing ties which are suitable for different panel thicknesses and hole diameters.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀1.5-34.0mm, natural, 500pcs.
T50SL6-PA66-NA 111-85469
Porovnat
Přidat do sledovaných položek
500 pcs.
Natural (NA) T50SL6-PA66-NA 111-85469
Fixing tie for hole (round), ⌀1.0-27.0mm, natural, 100pcs.
Porovnat
Fixing tie for hole (round), ⌀1.0-27.0mm, natural, 100pcs.
RT18RSF-PA66-NA 115-01900
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) RT18RSF-PA66-NA 115-01900
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Fixing tie for hole (round), inside serrated, ⌀10.0-40.0mm, black, 100pcs.
FT220DP7-N66-BK.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀10.0-40.0mm, black, 100pcs.
FT220DP7-PA66-BK 150-01700
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) FT220DP7-PA66-BK 150-01700
Cable tie mount for stud, Wmax=5mm, ⌀5.0 mm, ⌀5.0 mm, black, 500pcs.
Fixing Element CTMS5 allows bundles to be routed alongside the stud.
Porovnat
Cable tie mount for stud, Wmax=5mm, ⌀5.0 mm, ⌀5.0 mm, black, 500pcs.
CTMS5-PA66-BK 151-03301
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) CTMS5-PA66-BK 151-03301
Cable tie mount for screw fixation, Wmax=4.1mm, ⌀3.1 mm, white, 100pcs.
MB-Series Mounts with square design / self-adhesive, screwable.
Porovnat
Cable tie mount for screw fixation, Wmax=4.1mm, ⌀3.1 mm, white, 100pcs.
MB3-PA66-WH 151-28359
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) MB3-PA66-WH 151-28359
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Cable tie mount for screw fixation, Wmax=5.4mm, ⌀4.0 mm, white, 100pcs.
4-way cable tie entry for more installation options.
Porovnat
Cable tie mount for screw fixation, Wmax=5.4mm, ⌀4.0 mm, white, 100pcs.
MB4-PA66-WH 151-28479
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) MB4-PA66-WH 151-28479
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, natural, 100pcs.
LKM / CL8 Cable Tie Mounts with curved design.
Porovnat
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, natural, 100pcs.
CL8-PA66-NA 151-02258
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) CL8-PA66-NA 151-02258
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, black, 100pcs.
LKM / CL8 Cable Tie Mounts with curved design.
Porovnat
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, black, 100pcs.
CL8-PA66W-BK 151-02259
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) CL8-PA66W-BK 151-02259
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Cable tie mount for screw fixation, Wmax=2.5mm, ⌀3.7 mm, M3 Screw, natural, 500pcs.
FH Cable Tie Mounts for areas with limited space.
Porovnat
Cable tie mount for screw fixation, Wmax=2.5mm, ⌀3.7 mm, M3 Screw, natural, 500pcs.
FH18-PA66-NA 151-61119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
500 pcs.
Natural (NA) FH18-PA66-NA 151-61119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Cable tie mount for screw fixation, Wmax=3.5mm, ⌀5.5 mm, natural, 500pcs.
FH Cable Tie Mounts for areas with limited space.
Porovnat
Cable tie mount for screw fixation, Wmax=3.5mm, ⌀5.5 mm, natural, 500pcs.
FH30-PA66-NA 151-61319
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
500 pcs.
Natural (NA) FH30-PA66-NA 151-61319
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀5.5 mm, M4 Screw, black, 100pcs.
Porovnat
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀5.5 mm, M4 Screw, black, 100pcs.
LKC-PA66-BK 151-27010
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) LKC-PA66-BK 151-27010
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀3.8 mm, #6 (M3) Screw, white, 100pcs.
Porovnat
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀3.8 mm, #6 (M3) Screw, white, 100pcs.
CTM0-PA66-WH 151-30303
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) CTM0-PA66-WH 151-30303
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.8 mm, #8 (M4) Screw, white, 100pcs.
Porovnat
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.8 mm, #8 (M4) Screw, white, 100pcs.
CTM1-PA66-WH 151-30404
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) CTM1-PA66-WH 151-30404
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, black, 100pcs.
Porovnat
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, black, 100pcs.
CTM3-PA66-BK 151-30600
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) CTM3-PA66-BK 151-30600
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, white, 100pcs.
Porovnat
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, white, 100pcs.
CTM3-PA66-WH 151-30605
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) CTM3-PA66-WH 151-30605
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀5.2 mm, #10 (M5) Screw, white, 100pcs.
CTAM mounts for applications with limited space.
Porovnat
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀5.2 mm, #10 (M5) Screw, white, 100pcs.
CTAM2-PA66-WH 151-31203
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) CTAM2-PA66-WH 151-31203
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀6.2 mm, ⌀6.2 mm, #1/4" (M6) Screw, black, 100pcs.
Eliminates the need for multiple sizes of fixed diameter clamps.
Porovnat
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀6.2 mm, ⌀6.2 mm, #1/4" (M6) Screw, black, 100pcs.
HDM25-PA66HIRHSUV-BK 151-00437
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) HDM25-PA66HIRHSUV-BK 151-00437
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀7.8 mm, ⌀7.9 mm, 5/16" (M8) Screw, black, 100pcs.
Mount and tie combination makes it easy to service bundles in the field.
Porovnat
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀7.8 mm, ⌀7.9 mm, 5/16" (M8) Screw, black, 100pcs.
HDM312-PA66HIRHSUV-BK 151-00439
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) HDM312-PA66HIRHSUV-BK 151-00439
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀5.0 mm, M4 Screw, white, 100pcs.
Simple to install with a screw or rivet.
Porovnat
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀5.0 mm, M4 Screw, white, 100pcs.
MB2-PA66-WH 151-28219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) MB2-PA66-WH 151-28219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Cable tie tool for 2.5-4.8mm, manual, 0.28kg, black
EVO7SP has a shorter grip for smaller hands.
Porovnat
Cable tie tool for 2.5-4.8mm, manual, 0.28kg, black
EVO7SP-MET/PL-BK 110-70084
Porovnat
Přidat do sledovaných položek
1 pc.
Black (BK) EVO7SP-MET/PL-BK 110-70084
Cable clip for adhesive use/with pipe/tube holder, Dmax=18.0mm
Self adhesive one piece fixing clips RA- & RB-Series.
Porovnat
Cable clip for adhesive use/with pipe/tube holder, Dmax=18.0mm
RA18-PA66-NA 151-13119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) RA18-PA66-NA 151-13119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Cable clip for adhesive use/with pipe/tube holder, Dmax=3.0mm
Self adhesive one piece fixing clips RA- & RB-Series.
Porovnat
Cable clip for adhesive use/with pipe/tube holder, Dmax=3.0mm
RA3-PA66-NA 151-13018
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) RA3-PA66-NA 151-13018
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Cable clip for adhesive use/with pipe/tube holder, Dmin=14.0mm, Dmax=14.0mm
RB14 self-adhesive clip for a quick and easy installation.
Porovnat
Cable clip for adhesive use/with pipe/tube holder, Dmin=14.0mm, Dmax=14.0mm
RB14-PA66-BK 151-00502
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RB14-PA66-BK 151-00502
P-clamp closed, Dmax=19.0mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=19.0mm, ⌀4.2 mm, natural, 1000pcs.
H11P-PA66-NA 211-60119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) H11P-PA66-NA 211-60119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=22.0mm, ⌀5.2 mm, natural, 500pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=22.0mm, ⌀5.2 mm, natural, 500pcs.
H13P-PA66-NA 211-60139
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
500 pcs.
Natural (NA) H13P-PA66-NA 211-60139
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=24.0mm, ⌀5.2 mm, natural, 500pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=24.0mm, ⌀5.2 mm, natural, 500pcs.
H14P-PA66-NA 211-60149
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
500 pcs.
Natural (NA) H14P-PA66-NA 211-60149
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=25.5mm, ⌀5.2 mm, natural, 500pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=25.5mm, ⌀5.2 mm, natural, 500pcs.
H15P-PA66-NA 211-60159
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
500 pcs.
Natural (NA) H15P-PA66-NA 211-60159
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=28.5mm, ⌀5.2 mm, natural, 500pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=28.5mm, ⌀5.2 mm, natural, 500pcs.
H16P-PA66-NA 211-60169
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
500 pcs.
Natural (NA) H16P-PA66-NA 211-60169
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=31.5mm, ⌀5.2 mm, natural, 250pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=31.5mm, ⌀5.2 mm, natural, 250pcs.
H17P-PA66-NA 211-60179
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
250 pcs.
Natural (NA) H17P-PA66-NA 211-60179
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=35.0mm, ⌀5.2 mm, natural, 250pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=35.0mm, ⌀5.2 mm, natural, 250pcs.
H18P-PA66-NA 211-60189
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
250 pcs.
Natural (NA) H18P-PA66-NA 211-60189
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Porovnat
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 100pcs.
H3P-PA66HS-BK 211-60002
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) H3P-PA66HS-BK 211-60002
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable by design focuses on product solutions that reduce waste, improve longevity or support subsequent reuse and recyclability.
Facebook  Instagram  Twitter  YouTube  LinkedIn  Corporate Blog 
Kontakt VOP Impressum Mapa stránek Newsletter Pokyny a závazky Zásady ochrany osobních údajů
Aktualizace: 27/04/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.273) | Aktualizace: 27/04/2025 | Nastavení ochrany osobních údajů
Hledat prodejce Kontakt