Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
17/12/2025

Výsledky pro "12"

Nalezeno 1 799 výrobků 9 dalších položek
K dispozici jsou výsledky v následujících kategoriích:
Cable Ties and Fixings

Cable Ties and Fixings  (582)

Cable Ties Inside Serrated  (117) Cable Ties Outside Serrated  (3) Cable Ties Without Serration  (32) Cable Ties, Releasable  (9) Cable Ties, Stainless Steel  (34) Cable Ties With Fixing Elements  (226) Cable Tie Mounts  (30) Fixing Elements  (39) Clips, Clamps and Plugs  (127)
Cable Ties and Fixings
Cable Ties and Fixings (582)
Insulation

Insulation  (631)

Heat Shrink Tubing  (488) Heat Shrinkable Moulded Shapes  (131) Insulating tubes  (15)
Insulation
Insulation (631)
Cable Protection Systems

Cable Protection Systems  (329)

Non-Metallic Conduit Systems  (101) Metallic Conduit Systems  (51) Spiral-Reinforced Conduit Systems  (11) Conduit System Accessories  (31) Protective Tubing and Spiral Binding  (19) Expandable Braided Sleeves  (33) Open Woven Sleeves  (48) Burst Protective Sleeves  (1) Electromagnetic Shielding Sleeves  (11) Edge Protection  (15) Grommets  (41) Wiring Ducts and Accessories  (12)
Cable Protection Systems
Cable Protection Systems (329)
Electrical Installation

Electrical Installation  (26)

Wire Connectors  (13) Electrical Tapes  (3) Cast Resin Technology  (5) Gel Technology  (2) Chemicals  (1) Cable Entry Systems  (2)
Electrical Installation
Electrical Installation (26)
Identification Systems

Identification Systems  (203)

Wire and Cable Markers  (159) Control Panel Labelling  (46) Industrial Identification  (44)
Identification Systems
Identification Systems (203)
Application Tooling

Application Tooling  (30)

Automatic Cable Tying System  (12) Application Tooling for Cable Ties  (9) Application Tooling for Non Shrinkable Tubing  (8) Application Tooling for Braided Sleeves  (1)
Application Tooling
Application Tooling (30)
1 799 produkty
Resetovat vše
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 760.0x7.6mm, ⌀5.0-225mm, natural, 50pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 760.0x7.6mm, ⌀5.0-225mm, natural, 50pcs.
T120L-PA66HS-NA 111-12449
Porovnat
Přidat do sledovaných položek
50 pcs.
Natural (NA) T120L-PA66HS-NA 111-12449
Cable tie inside serrated, 925.0x8.9mm, ⌀8.0-274.3mm, natural, 25pcs.
Heavy duty T-Series cable ties feature inside serrations to provide a positive hold on wire and cable bundles.
Porovnat
Cable tie inside serrated, 925.0x8.9mm, ⌀8.0-274.3mm, natural, 25pcs.
T150LL-PA66-NA 111-15719
Porovnat
Přidat do sledovaných položek
25 pcs.
Natural (NA) T150LL-PA66-NA 111-15719
Cable tie mount for screw fixation, Wmax=3.5mm, ⌀5.5 mm, natural, 500pcs.
FH Cable Tie Mounts for areas with limited space.
Porovnat
Cable tie mount for screw fixation, Wmax=3.5mm, ⌀5.5 mm, natural, 500pcs.
FH30-PA66-NA 151-61319
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
500 pcs.
Natural (NA) FH30-PA66-NA 151-61319
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=13.0mm, ⌀6.0 mm, M6 Screw, natural, 100pcs.
Porovnat
Cable tie mount for screw fixation, Wmax=13.0mm, ⌀6.0 mm, M6 Screw, natural, 100pcs.
LKCSF1-PA66-NA 151-27219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) LKCSF1-PA66-NA 151-27219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.2mm, ⌀3.7 mm, #6 (M3) Screw, natural, 100pcs.
Allows multiple cables to be run in parallel.
Porovnat
Cable tie mount for screw fixation, Wmax=5.2mm, ⌀3.7 mm, #6 (M3) Screw, natural, 100pcs.
MP4M3-PA66-NA 151-24419
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) MP4M3-PA66-NA 151-24419
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀7.8 mm, ⌀7.9 mm, 5/16" (M8) Screw, black, 100pcs.
Mount and tie combination makes it easy to service bundles in the field.
Porovnat
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀7.8 mm, ⌀7.9 mm, 5/16" (M8) Screw, black, 100pcs.
HDM312-PA66HIRHSUV-BK 151-00439
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) HDM312-PA66HIRHSUV-BK 151-00439
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Heat Shrinkable Tubing 2:1 flexible 19.0/9.5 transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible 19.0/9.5 transparent
TF24-19.1/9.5-PO-X-CL 309-31903
Porovnat
Přidat do sledovaných položek
50 metre
Transparent (CL) TF24-19.1/9.5-PO-X-CL 309-31903
Heat Shrinkable Tubing 2:1 flexible 25.4/12.7 transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible 25.4/12.7 transparent
TF24-25.4/12.7-PO-X-CL 309-32543
Porovnat
Přidat do sledovaných položek
50 metre
Transparent (CL) TF24-25.4/12.7-PO-X-CL 309-32543
Heat Shrinkable Tubing 2:1 flexible 38.0/19.5 transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible 38.0/19.5 transparent
TF24-38.1/19.1-PO-X-CL 309-33813
Porovnat
Přidat do sledovaných položek
60 metre
Transparent (CL) TF24-38.1/19.1-PO-X-CL 309-33813
Heat Shrinkable Tubing 2:1 flexible 50.8/25.4 transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible 50.8/25.4 transparent
TF24-50.8/25.4-PO-X-CL 309-35083
Porovnat
Přidat do sledovaných položek
60 metre
Transparent (CL) TF24-50.8/25.4-PO-X-CL 309-35083
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-2.4/1.2-PO-X-CL 305-02419
Porovnat
Přidat do sledovaných položek
100 m
Transparent (CL) HFT-B-2.4/1.2-PO-X-CL 305-02419
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-19.0/9.5-PO-X-CL 305-19019
Porovnat
Přidat do sledovaných položek
50 metre
Transparent (CL) HFT-B-19.0/9.5-PO-X-CL 305-19019
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-25.4/12.7-PO-X-CL 305-25419
Porovnat
Přidat do sledovaných položek
25 m
Transparent (CL) HFT-B-25.4/12.7-PO-X-CL 305-25419
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-38.0/19.0-PO-X-CL 305-38119
Porovnat
Přidat do sledovaných položek
50 m
Transparent (CL) HFT-B-38.0/19.0-PO-X-CL 305-38119
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-1.6/0.8-PO-X-CL 305-01619
Porovnat
Přidat do sledovaných položek
100 m
Transparent (CL) HFT-B-1.6/0.8-PO-X-CL 305-01619
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-3.2/1.6-PO-X-CL 305-03219
Porovnat
Přidat do sledovaných položek
100 m
Transparent (CL) HFT-B-3.2/1.6-PO-X-CL 305-03219
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-4.8/2.4-PO-X-CL 305-04819
Porovnat
Přidat do sledovaných položek
300 metre
Transparent (CL) HFT-B-4.8/2.4-PO-X-CL 305-04819
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-12.7/6.4-PO-X-CL 305-12719
Porovnat
Přidat do sledovaných položek
50 m
Transparent (CL) HFT-B-12.7/6.4-PO-X-CL 305-12719
Heat Shrinkable Tubing 2:1 Thin Wall VG-Norm 3,2/1,6
Thin wall TE28 tubing.
Porovnat
Heat Shrinkable Tubing 2:1 Thin Wall VG-Norm 3,2/1,6
TE28 3.2/1.6-POA-BK 342-30010
Porovnat
Přidat do sledovaných položek
150 metre
Black (BK) TE28 3.2/1.6-POA-BK 342-30010
Heat Shrinkable Tubing 2:1 Thin Wall VG-Norm 4,8/2,4
Thin wall TE28 tubing.
Porovnat
Heat Shrinkable Tubing 2:1 Thin Wall VG-Norm 4,8/2,4
TE28 4.8/2.4-POA-BK 342-30020
Porovnat
Přidat do sledovaných položek
60 metre
Black (BK) TE28 4.8/2.4-POA-BK 342-30020
Heat Shrinkable Tubing 2:1 Thin Wall VG-Norm 9,5/4,8
Thin wall TE28 tubing.
Porovnat
Heat Shrinkable Tubing 2:1 Thin Wall VG-Norm 9,5/4,8
TE28 9.5/4.8-POA-BK 342-30040
Porovnat
Přidat do sledovaných položek
60 metre
Black (BK) TE28 9.5/4.8-POA-BK 342-30040
Heat Shrinkable Tubing 2:1 Thin Wall VG-Norm 12,7/6,4
Thin wall TE28 tubing.
Porovnat
Heat Shrinkable Tubing 2:1 Thin Wall VG-Norm 12,7/6,4
TE28 12.7/6.4-POA-BK 342-30050
Porovnat
Přidat do sledovaných položek
60 metre
Black (BK) TE28 12.7/6.4-POA-BK 342-30050
Heat Shrinkable Tubing 3.5:1 Medium Wall length 1m 115/34 black
Medium single wall tubing MU47 and dual wall tubing MA47.
Porovnat
Heat Shrinkable Tubing 3.5:1 Medium Wall length 1m 115/34 black
MU47-115/34-PO-X-BK 323-11150
Porovnat
Přidat do sledovaných položek
4 pcs.
Black (BK) MU47-115/34-PO-X-BK 323-11150
Heat Shrinkable Tubing 3.5:1 Medium Wall length 1m 140/42 black
Medium single wall tubing MU47 and dual wall tubing MA47.
Porovnat
Heat Shrinkable Tubing 3.5:1 Medium Wall length 1m 140/42 black
MU47-140/42-PO-X-BK 323-11400
Porovnat
Přidat do sledovaných položek
4 pcs.
Black (BK) MU47-140/42-PO-X-BK 323-11400
Heat Shrinkable Tubing 2:1 VG-Norm 3,2/1,6
SE28 - Diesel resistant 2:1 high performance elastomer heat shrink tubing.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 3,2/1,6
SE28 3.2/1.6-POA-BK 342-20000
Porovnat
Přidat do sledovaných položek
150 metre
Black (BK) SE28 3.2/1.6-POA-BK 342-20000
Heat Shrinkable Tubing 2:1 VG-Norm 4,8/2,4
SE28 - Diesel resistant 2:1 high performance elastomer heat shrink tubing.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 4,8/2,4
SE28 4.8/2.4-POA-BK 342-20010
Porovnat
Přidat do sledovaných položek
60 metre
Black (BK) SE28 4.8/2.4-POA-BK 342-20010
Heat Shrinkable Tubing 2:1 VG-Norm 12,7/6,4
SE28 - Diesel resistant 2:1 high performance elastomer heat shrink tubing.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 12,7/6,4
SE28 12.7/6.4-POA-BK 342-20040
Porovnat
Přidat do sledovaných položek
60 metre
Black (BK) SE28 12.7/6.4-POA-BK 342-20040
Heat Shrinkable Tubing 2:1 VG-Norm 25,4/12,7
SE28 - Diesel resistant 2:1 high performance elastomer heat shrink tubing.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 25,4/12,7
SE28 25.4/12.7-POA-BK 342-20060
Porovnat
Přidat do sledovaných položek
30 metre
Black (BK) SE28 25.4/12.7-POA-BK 342-20060
Heat Shrinkable Tubing 2:1 VG-Norm 51,0/25,4
SE28 - Diesel resistant 2:1 high performance elastomer heat shrink tubing.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 51,0/25,4
SE28 51.0/25.4-POA-BK 342-20080
Porovnat
Přidat do sledovaných položek
30 metre
Black (BK) SE28 51.0/25.4-POA-BK 342-20080
Heat Shrinkable Tubing 2:1 VG-Norm 76,0/38,0
SE28 - Diesel resistant 2:1 high performance elastomer heat shrink tubing.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 76,0/38,0
SE28 76.0/38.0-POA-BK 342-20090
Porovnat
Přidat do sledovaných položek
15 metre
Black (BK) SE28 76.0/38.0-POA-BK 342-20090
Heat Shrinkable Tubing 2:1 VG-Norm 101,2/51,0
SE28 - Diesel resistant 2:1 high performance elastomer heat shrink tubing.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 101,2/51,0
SE28 101.2/51.0-POA-BK 342-20100
Porovnat
Přidat do sledovaných položek
10 metre
Black (BK) SE28 101.2/51.0-POA-BK 342-20100
Cable tie inside serrated, 175x4.0mm, ⌀1.5-40.0mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 175x4.0mm, ⌀1.5-40.0mm, natural, 100pcs.
T40R-PA66-NA 111-01626
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) T40R-PA66-NA 111-01626
Cable tie inside serrated, 300x4.6mm, ⌀1.5-85.0mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 300x4.6mm, ⌀1.5-85.0mm, natural, 100pcs.
T50I-PA66HS-NA 111-05259
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) T50I-PA66HS-NA 111-05259
Cable tie inside serrated, 150x4.6mm, ⌀1.5-35.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 150x4.6mm, ⌀1.5-35.0mm, black, 100pcs.
T50S-PA66-BK 111-05810
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T50S-PA66-BK 111-05810
Cable tie inside serrated, 390x4.7mm, ⌀1.5-110mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 390x4.7mm, ⌀1.5-110mm, black, 100pcs.
T80L-PA66HS-BK 111-00388
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T80L-PA66HS-BK 111-00388
Cable tie inside serrated, 387x7.6mm, ⌀3.0-100mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 387x7.6mm, ⌀3.0-100mm, natural, 100pcs.
T120R(E)-PA66HS-NA 111-12059
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) T120R(E)-PA66HS-NA 111-12059
Cable tie inside serrated, 387x7.6mm, ⌀3.0-100mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 387x7.6mm, ⌀3.0-100mm, black, 100pcs.
T120R(E)-PA66W-BK 111-01966
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T120R(E)-PA66W-BK 111-01966
Cable tie inside serrated, 120x4.8mm, ⌀3.0-28.0mm, natural, 200pcs.
Porovnat
Cable tie inside serrated, 120x4.8mm, ⌀3.0-28.0mm, natural, 200pcs.
LK2-PA66-NA 111-60219
Porovnat
Přidat do sledovaných položek
200 pcs.
Natural (NA) LK2-PA66-NA 111-60219
Stainless steel cable tie, ball bearing lock, 521x7.9mm, ⌀17-152mm, black, 50pcs.
Stainless steel cable ties, coated, MBT_SFC, MBT_HFC.
Porovnat
Stainless steel cable tie, ball bearing lock, 521x7.9mm, ⌀17-152mm, black, 50pcs.
MBT20HFC-SS316L/SP-BK 111-00296
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) MBT20HFC-SS316L/SP-BK 111-00296
Heat shrink marker, thermal transfer print, ladder-style, 4.5mm/1.6mm, W=48.26mm, white, 3000pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 4.5mm/1.6mm, W=48.26mm, white, 3000pcs.
HST4.8-1.6WH-PO-X-WH 553-50177
Porovnat
Přidat do sledovaných položek
3000 pcs.
White (WH) HST4.8-1.6WH-PO-X-WH 553-50177
Heat shrink marker, thermal transfer print, ladder-style, 4.5mm/1.6mm, W=48.26mm, white, 6400pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 4.5mm/1.6mm, W=48.26mm, white, 6400pcs.
HST4.8-1.6WH-PO-X-WH 553-50195
Porovnat
Přidat do sledovaných položek
6400 pcs.
White (WH) HST4.8-1.6WH-PO-X-WH 553-50195
Three-pronged plier Dmin=1.25mm, Dmax=1.75mm, 10.5mm, 28mm, metal, 1pc.
Fast, secure application with the NA three-pronged pliers.
Porovnat
Three-pronged plier Dmin=1.25mm, Dmax=1.75mm, 10.5mm, 28mm, metal, 1pc.
NA0/1-MET-ML 621-10001
Porovnat
Přidat do sledovaných položek
1 pcs.
Metal (ML) NA0/1-MET-ML 621-10001
Heat Shrinkable Tubing 2:1 VG-Norm 1,2/0,6 brown
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 1,2/0,6 brown
HFT-A-1.2/0.6-PO-X-BN 305-01201
Porovnat
Přidat do sledovaných položek
100 metre
Brown (BN) HFT-A-1.2/0.6-PO-X-BN 305-01201
Heat Shrinkable Tubing 2:1 3.2/1.6 green
Porovnat
Heat Shrinkable Tubing 2:1 3.2/1.6 green
HFT-A-3.2/1.6-PO-X-GN 305-03205
Porovnat
Přidat do sledovaných položek
400 metre
Green (GN) HFT-A-3.2/1.6-PO-X-GN 305-03205
Heat Shrinkable Tubing 2:1 4.8/2.4 grey
HFT-A conforms to major standards (VG) used in all Defence industries.
Porovnat
Heat Shrinkable Tubing 2:1 4.8/2.4 grey
HFT-A-4.8/2.4-PO-X-GY 305-04808
Porovnat
Přidat do sledovaných položek
300 metre
Grey (GY) HFT-A-4.8/2.4-PO-X-GY 305-04808
Heat Shrinkable Tubing 2:1 VG-Norm 9.5/4.8 green
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 9.5/4.8 green
HFT-A-9.5/4.8-PO-X-GN 305-09505
Porovnat
Přidat do sledovaných položek
150 metre
Green (GN) HFT-A-9.5/4.8-PO-X-GN 305-09505
Heat Shrinkable Tubing 2:1 38.0/19.0 green
Porovnat
Heat Shrinkable Tubing 2:1 38.0/19.0 green
HFT-A-38.0/19.0-PO-X-GN 305-38105
Porovnat
Přidat do sledovaných položek
50 metre
Green (GN) HFT-A-38.0/19.0-PO-X-GN 305-38105
Heat Shrinkable Tubing 2:1 76.0/38.0 green
Porovnat
Heat Shrinkable Tubing 2:1 76.0/38.0 green
HFT-A-76.0/38.0-PO-X-GN 305-76205
Porovnat
Přidat do sledovaných položek
25 metre
Green (GN) HFT-A-76.0/38.0-PO-X-GN 305-76205
Heat Shrinkable Tubing 2:1 (6.4/3.2) black
Porovnat
Heat Shrinkable Tubing 2:1 (6.4/3.2) black
PST-H-6.4/3.2-POA-BK 342-20640
Porovnat
Přidat do sledovaných položek
300 metre
Black (BK) PST-H-6.4/3.2-POA-BK 342-20640
Heat Shrinkable Tubing 2:1 flexible 2.4/1.2 transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible 2.4/1.2 transparent
TF24-2.4/1.2-PO-X-CL 309-40243
Porovnat
Přidat do sledovaných položek
100 metre
Transparent (CL) TF24-2.4/1.2-PO-X-CL 309-40243
Braided sleeving, abrasion resistant, nom⌀10mm, ⌀7-12mm, black, 100m
HEGPA66 - Extreme abrasion protection sleeve.
Porovnat
Braided sleeving, abrasion resistant, nom⌀10mm, ⌀7-12mm, black, 100m
HEGPA6610-PA66-BK 170-41000
Porovnat
Přidat do sledovaných položek
100 metre
Black (BK) HEGPA6610-PA66-BK 170-41000
Braided sleeving, abrasion resistant, nom⌀16mm, ⌀12-18mm, black, 50m
HEGPA66 - Extreme abrasion protection sleeve.
Porovnat
Braided sleeving, abrasion resistant, nom⌀16mm, ⌀12-18mm, black, 50m
HEGPA6616-PA66-BK 170-41600
Porovnat
Přidat do sledovaných položek
50 metre
Black (BK) HEGPA6616-PA66-BK 170-41600
Chloroprene Rubber Tubing 25x2.5mm black
H rubber tubing is highly flexible and easy to apply.
Porovnat
Chloroprene Rubber Tubing 25x2.5mm black
H25X25BK-CR-BK 600-02934
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) H25X25BK-CR-BK 600-02934
Cable grommet, ⌀19.0 mm, black, 500pcs.
Edge Protection Grommet - HV1101.
Porovnat
Cable grommet, ⌀19.0 mm, black, 500pcs.
HV1101-PVC-FR-BK 633-01010
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) HV1101-PVC-FR-BK 633-01010
Cable grommet, ⌀12.0 mm, black, 1000pcs.
Edge Protection Grommet - HV1204.
Porovnat
Cable grommet, ⌀12.0 mm, black, 1000pcs.
HV1204-PVC-FR-BK 633-02040
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) HV1204-PVC-FR-BK 633-02040
Cable grommet, ⌀9.0 mm, black, 1000pcs.
Edge Protection Grommet - HV1210.
Porovnat
Cable grommet, ⌀9.0 mm, black, 1000pcs.
HV1210-PVC-FR-BK 633-02100
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) HV1210-PVC-FR-BK 633-02100
Cable grommet, ⌀10.0 mm, black, 1000pcs.
Edge Protection Grommet - HV1218.
Porovnat
Cable grommet, ⌀10.0 mm, black, 1000pcs.
HV1218-PVC-FR-BK 633-02180
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) HV1218-PVC-FR-BK 633-02180
Cable grommet, ⌀9.0 mm, black, 1000pcs.
Bend Protection Grommet - HV2101.
Porovnat
Cable grommet, ⌀9.0 mm, black, 1000pcs.
HV2101-PVC-FR-BK 632-01010
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) HV2101-PVC-FR-BK 632-01010
Spiral wrap, nom⌀1.5mm, ⌀1.6-8mm, -60 °C to +80 °C, intermittent +120 °C, natural, 30m
SBPE - Natural PE Spiral Wrap.
Porovnat
Spiral wrap, nom⌀1.5mm, ⌀1.6-8mm, -60 °C to +80 °C, intermittent +120 °C, natural, 30m
SBPE1.5-PE-NA 161-41000
Porovnat
Přidat do sledovaných položek
30 metre
Natural (NA) SBPE1.5-PE-NA 161-41000
Bundling Clip, round hole 6.4 - 7.1 mm, fir tree, offset, high impact modified, heat stabilised, black
Porovnat
Bundling Clip, round hole 6.4 - 7.1 mm, fir tree, offset, high impact modified, heat stabilised, black
SOC3FT6LG-PA66HIRHS-BK 155-19001
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) SOC3FT6LG-PA66HIRHS-BK 155-19001
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22.0mm, black, 100pcs.
T18R-PA66-BK 111-01910
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T18R-PA66-BK 111-01910
Fixing tie for edge, outside serrated, ⌀4.0-35.0mm, black, 500pcs.
2-piece fixing tie for edges 1 - 3 mm and harness routing on top parallel to the edge.
Porovnat
Fixing tie for edge, outside serrated, ⌀4.0-35.0mm, black, 500pcs.
T50SOSEC4A-PA66HS/PA66HIRHS-BK 150-76093
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SOSEC4A-PA66HS/PA66HIRHS-BK 150-76093
Heat Shrinkable Tubing 2:1 on a Reel 3,2/1,6 black
Porovnat
Heat Shrinkable Tubing 2:1 on a Reel 3,2/1,6 black
HIS-PACK-3.2/1.6-PO-X-BK 300-30320
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) HIS-PACK-3.2/1.6-PO-X-BK 300-30320
Heat Shrinkable Tubing 2:1 VG-Norm 12.7/6.4 black
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 12.7/6.4 black
HFT-A-12.7/6.4-PO-X-BK 305-12700
Porovnat
Přidat do sledovaných položek
100 metre
Black (BK) HFT-A-12.7/6.4-PO-X-BK 305-12700
Gel cable joint, 9-16mm, 1 x 10mm² to 1 x 50mm², L=86mm, Polypropylene (PP)/Silicone (SI), green
Gel cable joint Relifix V 150.
Porovnat
Gel cable joint, 9-16mm, 1 x 10mm² to 1 x 50mm², L=86mm, Polypropylene (PP)/Silicone (SI), green
Relifix V150-PP/SI-GN 435-00651
Porovnat
Přidat do sledovaných položek
1 pack
Green (GN) Relifix V150-PP/SI-GN 435-00651
Cable clip for adhesive use/with pipe/tube holder, Dmax=6.0mm
RA6 self-adhesive clip for a quick and easy installation.
Porovnat
Cable clip for adhesive use/with pipe/tube holder, Dmax=6.0mm
RA6-PA66-NA 151-13019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) RA6-PA66-NA 151-13019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for adhesive use/with pipe/tube holder, ⌀3.2 mm, Dmax=3.0mm
Ideal for holding ribbon cables in computer equipment, gaming machines or domestic appliances.
Porovnat
Cable clip for adhesive use/with pipe/tube holder, ⌀3.2 mm, Dmax=3.0mm
TY8H1S-PA66-NA 151-12819
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) TY8H1S-PA66-NA 151-12819
P-clamp closed, Dmax=17.5mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=17.5mm, ⌀4.2 mm, natural, 1000pcs.
H10P-PA66-NA 211-60109
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) H10P-PA66-NA 211-60109
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=20.5mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=20.5mm, ⌀4.2 mm, natural, 1000pcs.
H12P-PA66-NA 211-60129
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) H12P-PA66-NA 211-60129
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Porovnat
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, black, 100pcs.
H2P-PA66HS-BK 211-60001
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) H2P-PA66HS-BK 211-60001
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 760.0x7.6mm, ⌀5.0-225mm, black, 50pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 760.0x7.6mm, ⌀5.0-225mm, black, 50pcs.
T120L-PA66W-BK 111-01701
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) T120L-PA66W-BK 111-01701
Cable tie inside serrated, 387.0x7.6mm, ⌀5.0-105.0mm, black, 100pcs.
Porovnat
Cable tie inside serrated, 387.0x7.6mm, ⌀5.0-105.0mm, black, 100pcs.
T120R-PA66W-BK 111-00400
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T120R-PA66W-BK 111-00400
Cable tie inside serrated, 225x7.6mm, ⌀5.0-55.0mm, natural, 50pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 225x7.6mm, ⌀5.0-55.0mm, natural, 50pcs.
T120S-PA66-NA 111-12829
Porovnat
Přidat do sledovaných položek
50 pcs.
Natural (NA) T120S-PA66-NA 111-12829
Cable tie inside serrated, 1095.0x8.9mm, ⌀152.0-330.0mm, black, 25pcs.
Heavy duty T-Series cable ties feature inside serrations to provide a positive hold on wire and cable bundles.
Porovnat
Cable tie inside serrated, 1095.0x8.9mm, ⌀152.0-330.0mm, black, 25pcs.
T150XL-PA66HS-BK 111-15510
Porovnat
Přidat do sledovaných položek
25 pcs.
Black (BK) T150XL-PA66HS-BK 111-15510
Cable tie inside serrated, 100.0x2.45mm, ⌀1.5-22.0mm, yellow, 100pcs.
T-Series Cable Ties feature inside serrations to provide a positive hold on wire and cable bundles.
Porovnat
Cable tie inside serrated, 100.0x2.45mm, ⌀1.5-22.0mm, yellow, 100pcs.
T18R-PA66-YE 116-01814
Porovnat
Přidat do sledovaných položek
100 pcs.
Yellow (YE) T18R-PA66-YE 116-01814
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-19.0mm, black, 100pcs.
Head design guarantees high tensile strength and a low insertion force.
Porovnat
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-19.0mm, black, 100pcs.
T18R-PP-BK 111-01917
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T18R-PP-BK 111-01917
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Cable tie mount for screw fixation, Wmax=4.0mm, ⌀2.2 mm, natural, 100pcs.
TY-Series Mounts with rectangle design, self-adhesive.
Porovnat
Cable tie mount for screw fixation, Wmax=4.0mm, ⌀2.2 mm, natural, 100pcs.
TY3G1-PA66-NA 151-21319
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) TY3G1-PA66-NA 151-21319
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀3.1 mm, natural, 1000pcs.
Cable Tie Mounts NY Series.
Porovnat
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀3.1 mm, natural, 1000pcs.
NY3256-PA66-NA 151-25219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) NY3256-PA66-NA 151-25219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Heat Shrinkable Tubing 3:1 PO-X 1 m Lengths Thin Wall 24/8 green-yellow
TFN21 - available in a wide range of colours and sizes.
Porovnat
Heat Shrinkable Tubing 3:1 PO-X 1 m Lengths Thin Wall 24/8 green-yellow
TREDUX-24/8-PO-X-GNYE 319-02407
Porovnat
Přidat do sledovaných položek
5 pcs.
Green-Yellow (GNYE) TREDUX-24/8-PO-X-GNYE 319-02407
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-9.5/4.8-PO-X-CL 305-09519
Porovnat
Přidat do sledovaných položek
50 metre
Transparent (CL) HFT-B-9.5/4.8-PO-X-CL 305-09519
Heat Shrinkable Cable Repair Sleeve 1000 mm, shrink ratio up to 4.5:1 (52/15 mm), adhesive lined, black
HellermannTyton RMS - Wrap-around heat shrink cable repair sleeve.
Porovnat
Heat Shrinkable Cable Repair Sleeve 1000 mm, shrink ratio up to 4.5:1 (52/15 mm), adhesive lined, black
RMS 52-15-PO-X-BK 450-20012
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) RMS 52-15-PO-X-BK 450-20012
Heat Shrinkable Tubing 2:1 VG-Norm 6,4/3,2
SE28 - Diesel resistant 2:1 high performance elastomer heat shrink tubing.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 6,4/3,2
SE28 6.4/3.2-POA-BK 342-20020
Porovnat
Přidat do sledovaných položek
60 metre
Black (BK) SE28 6.4/3.2-POA-BK 342-20020
Heat Shrinkable Tubing 2:1 VG-Norm 9,5/4,8
SE28 - Diesel resistant 2:1 high performance elastomer heat shrink tubing.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 9,5/4,8
SE28 9.5/4.8-POA-BK 342-20030
Porovnat
Přidat do sledovaných položek
60 metre
Black (BK) SE28 9.5/4.8-POA-BK 342-20030
Facebook  Instagram  Twitter  YouTube  LinkedIn  Corporate Blog 
Kontakt VOP Impressum Mapa stránek Newsletter Pokyny a závazky Zásady ochrany osobních údajů
Aktualizace: 14/12/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.292.5) | Aktualizace: 14/12/2025 | Nastavení ochrany osobních údajů
Hledat prodejce Kontakt