Výsledky pro "cable holder" v Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Pohled inženýra

Sustainable

Pohled inženýra

Sustainable

Resetovat vše

Cable clip for adhesive use/with pipe/tube holder, Dmax=12.0mm

Porovnat

SAC3-ST-WH 151-00300

Porovnat

Přidat do sledovaných položek

Porovnat

Cable clip for adhesive use/with pipe/tube holder, Dmax=12.0mm

Porovnat

Přidat do sledovaných položek

100 pcs.

White (WH) SAC3-ST-WH 151-00300

Fixing tie with pipe/tube holder, inside serrated, ⌀45.0mm, black, 2000pcs.

Pipe Clip CBTO, twistable 90°.

Porovnat

T50ROC15-18CBTO-SD-SET-PA66HS/PA66HIRHS-BK 156-00419

Porovnat

Přidat do sledovaných položek

Pipe Clip CBTO, twistable 90°.

Porovnat

Fixing tie with pipe/tube holder, inside serrated, ⌀45.0mm, black, 2000pcs.

Porovnat

Přidat do sledovaných položek

2000 pcs.

Black (BK) T50ROC15-18CBTO-SD-SET-PA66HS/PA66HIRHS-BK 156-00419

Fixing tie with pipe/tube holder, inside serrated, ⌀45.0mm, black, 3000pcs.

Pipe Clip CBTO, twistable 90°.

Porovnat

T50ROC19-24.5CBTO-SD-SET-PA66HS/PA66HIRHS-BK 156-00422

Porovnat

Přidat do sledovaných položek

Pipe Clip CBTO, twistable 90°.

Porovnat

Fixing tie with pipe/tube holder, inside serrated, ⌀45.0mm, black, 3000pcs.

Porovnat

Přidat do sledovaných položek

3000 pcs.

Black (BK) T50ROC19-24.5CBTO-SD-SET-PA66HS/PA66HIRHS-BK 156-00422

Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀9.0 x 12.0 mm/9.0 x 14.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10 - 14 mm

LOC1014FT9x12 locking clamp.

Porovnat

LOC1014FT9x12-PA66HIRHSUV-BK 151-02501

Porovnat

Přidat do sledovaných položek

LOC1014FT9x12 locking clamp.

Porovnat

Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀9.0 x 12.0 mm/9.0 x 14.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10 - 14 mm

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) LOC1014FT9x12-PA66HIRHSUV-BK 151-02501

Cable clip (LOC20-25FT6.5LG)

Locking tab on this clip is small enough that it will not interfere with any other portion of the wire routing, but is significant enough to allow for manual disengagement if service is needed.

Porovnat

LOC20-25FT6.5LG-PA66HIRHSUV-BK 151-01371

Porovnat

Přidat do sledovaných položek

Locking tab on this clip is small enough that it will not interfere with any other portion of the wire routing, but is significant enough to allow for manual disengagement if service is needed.

Porovnat

Cable clip (LOC20-25FT6.5LG)

Porovnat

Přidat do sledovaných položek

1000 pcs.

Black (BK) LOC20-25FT6.5LG-PA66HIRHSUV-BK 151-01371

Cable clip for adhesive use/with pipe/tube holder, Dmin=12.70mm, Dmax=19.56mm

The self adhesive mount of Ratchet -P-Clamp series creates an incredible bond with mounting surface.

Porovnat

IRCBMB5A-PA66HIRHSUV-BK 156-02723

Porovnat

Přidat do sledovaných položek

The self adhesive mount of Ratchet -P-Clamp series creates an incredible bond with mounting surface.

Porovnat

Cable clip for adhesive use/with pipe/tube holder, Dmin=12.70mm, Dmax=19.56mm

Porovnat

Přidat do sledovaných položek

25

Black (BK) IRCBMB5A-PA66HIRHSUV-BK 156-02723

Cable clip for edge, T=1.0 - 3.0mm, Dmin=6.5mm, Dmax=8.5mm

EdgeClip with Twist Lock.

Porovnat

EC1-3TL7OTP-PA66HIRHS-BK 151-02588

Porovnat

Přidat do sledovaných položek

EdgeClip with Twist Lock.

Porovnat

Cable clip for edge, T=1.0 - 3.0mm, Dmin=6.5mm, Dmax=8.5mm

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) EC1-3TL7OTP-PA66HIRHS-BK 151-02588

Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 250pcs.

Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.

Porovnat

T50SVCOC18-20A-PA66HS/PA66HIRHS-BK 156-01190

Porovnat

Přidat do sledovaných položek

Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.

Porovnat

Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 250pcs.

Porovnat

Přidat do sledovaných položek

250 pcs.

Black (BK) T50SVCOC18-20A-PA66HS/PA66HIRHS-BK 156-01190

Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 250pcs.

Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.

Porovnat

T50SVCOC18-20B-PA66HS/PA66HIRHS-BK 156-01194

Porovnat

Přidat do sledovaných položek

Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.

Porovnat

Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 250pcs.

Porovnat

Přidat do sledovaných položek

250 pcs.

Black (BK) T50SVCOC18-20B-PA66HS/PA66HIRHS-BK 156-01194

Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 5000pcs.

Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.

Porovnat

T50SVCOC9-11B-PA66HIRHS/PA66HS-BK 156-01237

Porovnat

Přidat do sledovaných položek

Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.

Porovnat

Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 5000pcs.

Porovnat

Přidat do sledovaných položek

5000 pcs.

Black (BK) T50SVCOC9-11B-PA66HIRHS/PA66HS-BK 156-01237

Fixing tie with pipe/tube holder, ⌀5.0-9.0mm, black, 1000pcs.

The cable tie bundles wires, cables or tubes, and the C-clip snaps onto the tubular frame rail.

Porovnat

T50SMVCLOC5-9-PA66HIRHSUV-BK 156-02384

Porovnat

Přidat do sledovaných položek

The cable tie bundles wires, cables or tubes, and the C-clip snaps onto the tubular frame rail.

Porovnat

Fixing tie with pipe/tube holder, ⌀5.0-9.0mm, black, 1000pcs.

Porovnat

Přidat do sledovaných položek

1000 pcs.

Black (BK) T50SMVCLOC5-9-PA66HIRHSUV-BK 156-02384

Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.

Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.

Porovnat

T50SVCOC9-11A-PA66HIRHS/PA66HS-BK 156-01236

Porovnat

Přidat do sledovaných položek

Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.

Porovnat

Fixing tie with pipe/tube holder, ⌀2.0-35.0mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) T50SVCOC9-11A-PA66HIRHS/PA66HS-BK 156-01236

Fixing tie with pipe/tube holder, outside serrated, ⌀2.0-35.0mm, black, 500pcs.

Porovnat

T50SOSASVCOC9-11B-PA66HIRHS-BK 156-03039

Porovnat

Přidat do sledovaných položek

Porovnat

Fixing tie with pipe/tube holder, outside serrated, ⌀2.0-35.0mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) T50SOSASVCOC9-11B-PA66HIRHS-BK 156-03039

Cable tie mount with pipe/tube holder, Wmax=8.8mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

New innovative QwicGrip for fastening to e.g. solar rails with cable ties.

Porovnat

QGDHC5.2-8.0M-PA66W-BK 151-04088

Porovnat

Přidat do sledovaných položek

New innovative QwicGrip for fastening to e.g. solar rails with cable ties.

Porovnat

Cable tie mount with pipe/tube holder, Wmax=8.8mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) QGDHC5.2-8.0M-PA66W-BK 151-04088

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie for stud, ⌀5.0-60.0mm, black, 25pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Porovnat

SBT120-M12-PA66HSUV-BK 157-00021

Porovnat

Přidat do sledovaných položek

Porovnat

Fixing tie for stud, ⌀5.0-60.0mm, black, 25pcs.

Porovnat

Přidat do sledovaných položek

25 pcs.

Black (BK) SBT120-M12-PA66HSUV-BK 157-00021

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Porovnat

T50SOSSBD-M6-PA66HSUV-BK 157-00038

Porovnat

Přidat do sledovaných položek

Porovnat

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) T50SOSSBD-M6-PA66HSUV-BK 157-00038

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Porovnat

T50SOSSBD-M10-PA66HSW-BK 157-00040

Porovnat

Přidat do sledovaných položek

Porovnat

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) T50SOSSBD-M10-PA66HSW-BK 157-00040

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.

Porovnat

T50SOSSBU-M6-PA66HSUV-GY 157-00065

Porovnat

Přidat do sledovaných položek

Porovnat

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Grey (GY) T50SOSSBU-M6-PA66HSUV-GY 157-00065

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.

T50SOSSBU-M8/10 for bundles which run below the stud.

Porovnat

T50SOSSBU-M10-PA66HSW-GY 157-00067

Porovnat

Přidat do sledovaných položek

T50SOSSBU-M8/10 for bundles which run below the stud.

Porovnat

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Grey (GY) T50SOSSBU-M10-PA66HSW-GY 157-00067

Fixing tie for stud, outside serrated, ⌀2.0-50.0mm, brown, 2000

Offset design positions bundles away from obstructions, heat or sources of abrasion.

Porovnat

T50ROSLPM8SMSO25-PA46-BN 157-00361

Porovnat

Přidat do sledovaných položek

Offset design positions bundles away from obstructions, heat or sources of abrasion.

Porovnat

Fixing tie for stud, outside serrated, ⌀2.0-50.0mm, brown, 2000

Porovnat

Přidat do sledovaných položek

2000 pcs.

Brown (BN) T50ROSLPM8SMSO25-PA46-BN 157-00361

Cable clip for adhesive use/with pipe/tube holder, Dmin=3.0mm, Dmax=13.0mm

Porovnat

RA13-PA66-BK 151-00121

Porovnat

Přidat do sledovaných položek

Porovnat

Cable clip for adhesive use/with pipe/tube holder, Dmin=3.0mm, Dmax=13.0mm

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) RA13-PA66-BK 151-00121

Fixing tie with pipe/tube holder, ⌀30.0mm, black, 500pcs.

Two Piece Fixing Tie T50RCTC5-9FT7 is used when a tubing needs to be fixed in addition to a cable bundle.

Porovnat

T50SCTC5-9FT7-PA66HS/PA66HIRHS-BK 156-01551

Porovnat

Přidat do sledovaných položek

Two Piece Fixing Tie T50RCTC5-9FT7 is used when a tubing needs to be fixed in addition to a cable bundle.

Porovnat

Fixing tie with pipe/tube holder, ⌀30.0mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) T50SCTC5-9FT7-PA66HS/PA66HIRHS-BK 156-01551

Fixing tie for stud, not serrated, ⌀6.0-23.0mm, black, 500pcs.

FBB one-piece fixing ties for weld studs, can be easly removed by unscrewing in an anti-clockwise direction.

Porovnat

FBB100M-PA66HS-BK 150-29100

Porovnat

Přidat do sledovaných položek

FBB one-piece fixing ties for weld studs, can be easly removed by unscrewing in an anti-clockwise direction.

Porovnat

Fixing tie for stud, not serrated, ⌀6.0-23.0mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) FBB100M-PA66HS-BK 150-29100

Fixing tie for stud, not serrated, ⌀6.0-50.0mm, black, 500pcs.

FBB one-piece fixing ties for weld studs, can be easly removed by unscrewing in an anti-clockwise direction.

Porovnat

FBB185M-PA66HS-BK 150-29180

Porovnat

Přidat do sledovaných položek

FBB one-piece fixing ties for weld studs, can be easly removed by unscrewing in an anti-clockwise direction.

Porovnat

Fixing tie for stud, not serrated, ⌀6.0-50.0mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) FBB185M-PA66HS-BK 150-29180

Fixing tie for stud, inside serrated, ⌀9.5-82.5mm, black, 300pcs.

Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.

Porovnat

WSI250-PA66HIRHSUV-BK 157-00401

Porovnat

Přidat do sledovaných položek

Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.

Porovnat

Fixing tie for stud, inside serrated, ⌀9.5-82.5mm, black, 300pcs.

Porovnat

Přidat do sledovaných položek

300 pcs.

Black (BK) WSI250-PA66HIRHSUV-BK 157-00401

Fixing tie for stud, inside serrated, ⌀9.5-57.1mm, black, 300pcs.

Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.

Porovnat

WSS8MM-PA66HIRHSW-BK 157-00034

Porovnat

Přidat do sledovaných položek

Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.

Porovnat

Fixing tie for stud, inside serrated, ⌀9.5-57.1mm, black, 300pcs.

Porovnat

Přidat do sledovaných položek

300 pcs.

Black (BK) WSS8MM-PA66HIRHSW-BK 157-00034

Fixing tie for stud, inside serrated, ⌀9.5-82.5mm, black, 300pcs.

Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.

Porovnat

WSI8MM-PA66HIRHSUV-BK 157-00035

Porovnat

Přidat do sledovaných položek

Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.

Porovnat

Fixing tie for stud, inside serrated, ⌀9.5-82.5mm, black, 300pcs.

Porovnat

Přidat do sledovaných položek

300 pcs.

Black (BK) WSI8MM-PA66HIRHSUV-BK 157-00035

Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, grey, 1000pcs.

Head allows for a 0.2

Porovnat

T50SOSSB5-High-E-C-CC-PA66HS-GY 157-00151

Porovnat

Přidat do sledovaných položek

Head allows for a 0.2

Porovnat

Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, grey, 1000pcs.

Porovnat

Přidat do sledovaných položek

1000 bag

Grey (GY) T50SOSSB5-High-E-C-CC-PA66HS-GY 157-00151

Fixing tie for stud, outside serrated, ⌀2.0-55.0mm, black, 500pcs.

Porovnat

T60ROSSB6HEC-PA66HS-BK 157-00101

Porovnat

Přidat do sledovaných položek

Porovnat

Fixing tie for stud, outside serrated, ⌀2.0-55.0mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) T60ROSSB6HEC-PA66HS-BK 157-00101

Cable tie mount, T=0.6 - 6.0mm, ⌀6.5 - 7.1 mm, black, 2000pcs.

Porovnat

ATSFT6LG-PA66HIRHS-BK 102-67062

Porovnat

Přidat do sledovaných položek

Porovnat

Cable tie mount, T=0.6 - 6.0mm, ⌀6.5 - 7.1 mm, black, 2000pcs.

Porovnat

Přidat do sledovaných položek

2000 pcs.

Black (BK) ATSFT6LG-PA66HIRHS-BK 102-67062

Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=15.0mm, Dmax=19.0mm, nom⌀=15.0 mm - 19.00 mm

Open Pipe Clip LOC15-19FTOVAL.

Porovnat

LOC15-19FTOVAL-PA66HIRHSUV-BK 151-01049

Porovnat

Přidat do sledovaných položek

Open Pipe Clip LOC15-19FTOVAL.

Porovnat

Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=15.0mm, Dmax=19.0mm, nom⌀=15.0 mm - 19.00 mm

Porovnat

Přidat do sledovaných položek

1000 pcs.

Black (BK) LOC15-19FTOVAL-PA66HIRHSUV-BK 151-01049

Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀9.0 x 12.0 mm/9.0 x 14.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10 - 14 mm

LOC1014FT9x12 locking clamp.

Porovnat

LOC1014FT9x12-PA66HIRHSUV-BK 151-02218

Porovnat

Přidat do sledovaných položek

LOC1014FT9x12 locking clamp.

Porovnat

Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀9.0 x 12.0 mm/9.0 x 14.0 mm, Dmin=10.0mm, Dmax=14.0mm, nom⌀=10 - 14 mm

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) LOC1014FT9x12-PA66HIRHSUV-BK 151-02218

Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=10.5mm, Dmax=13.8mm, nom⌀=12.0 mm

Porovnat

MOC12FTOVAL-PA66HIRHSUV-BK 151-01759

Porovnat

Přidat do sledovaných položek

Porovnat

Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=10.5mm, Dmax=13.8mm, nom⌀=12.0 mm

Porovnat

Přidat do sledovaných položek

2000 pcs.

Black (BK) MOC12FTOVAL-PA66HIRHSUV-BK 151-01759

Cable clip for edge, T=1.0 - 3.0mm, nom⌀=5.8 - 6.8 mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

EdgeClip for edges 1.0 - 3.0 mm, for parallel routing for up to two solar cables.

Porovnat

EC1-3SPDHC6-7-PA11/C75S-BK 151-04387

Porovnat

Přidat do sledovaných položek

EdgeClip for edges 1.0 - 3.0 mm, for parallel routing for up to two solar cables.

Porovnat

Cable clip for edge, T=1.0 - 3.0mm, nom⌀=5.8 - 6.8 mm

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) EC1-3SPDHC6-7-PA11/C75S-BK 151-04387

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip for edge, T=1.0 - 3.0mm, nom⌀=5.8 - 6.8 mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

EdgeClip for edges 1.0 - 3.0 mm, for parallel routing for up to two solar cables.

Porovnat

EC1-3SVDHC6-7-PA11/C75S-BK 151-04529

Porovnat

Přidat do sledovaných položek

EdgeClip for edges 1.0 - 3.0 mm, for parallel routing for up to two solar cables.

Porovnat

Cable clip for edge, T=1.0 - 3.0mm, nom⌀=5.8 - 6.8 mm

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) EC1-3SVDHC6-7-PA11/C75S-BK 151-04529

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip for adhesive use/with pipe/tube holder, Dmin=12.70mm, Dmax=19.56mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

The self adhesive mount of Ratchet -P-Clamp series creates an incredible bond with mounting surface.

Porovnat

IRCBMB5A-PA66HIRHSUV-BK 156-02634

Porovnat

Přidat do sledovaných položek

The self adhesive mount of Ratchet -P-Clamp series creates an incredible bond with mounting surface.

Porovnat

Cable clip for adhesive use/with pipe/tube holder, Dmin=12.70mm, Dmax=19.56mm

Porovnat

Přidat do sledovaných položek

250 pcs.

Black (BK) IRCBMB5A-PA66HIRHSUV-BK 156-02634

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip for adhesive use/with pipe/tube holder, Dmax=5.0mm

RB5 self-adhesive clip for a quick and easy installation.

Porovnat

RB5-PA66-BK 151-14000

Porovnat

Přidat do sledovaných položek

RB5 self-adhesive clip for a quick and easy installation.

Porovnat

Cable clip for adhesive use/with pipe/tube holder, Dmax=5.0mm

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) RB5-PA66-BK 151-14000

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

SolidTack Clip RB8APT with special adhesive.

Porovnat

RB8APT-PA66-BK 151-00497

Porovnat

Přidat do sledovaných položek

SolidTack Clip RB8APT with special adhesive.

Porovnat

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) RB8APT-PA66-BK 151-00497

Cable clip for adhesive use/with pipe/tube holder, Dmax=20.0mm

RB20 self-adhesive clip for a quick and easy installation.

Porovnat

RB20-PA66HIRHS-BK 151-00831

Porovnat

Přidat do sledovaných položek

RB20 self-adhesive clip for a quick and easy installation.

Porovnat

Cable clip for adhesive use/with pipe/tube holder, Dmax=20.0mm

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) RB20-PA66HIRHS-BK 151-00831

Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀7.0mm, blue, 500pcs.

CNCTC8FT6.5LG Clamps.

Porovnat

CNCTC8FT6.5LG-PA66HIRHS-BU 151-01177

Porovnat

Přidat do sledovaných položek

CNCTC8FT6.5LG Clamps.

Porovnat

Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀7.0mm, blue, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Blue (BU) CNCTC8FT6.5LG-PA66HIRHS-BU 151-01177

Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀8.0mm, black, 500pcs.

The tubing is clicked into the CTC clamp and is held firmly.

Porovnat

CTC8FT6-PA66HIRHS-BK 151-01543

Porovnat

Přidat do sledovaných položek

The tubing is clicked into the CTC clamp and is held firmly.

Porovnat

Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀8.0mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) CTC8FT6-PA66HIRHS-BK 151-01543

Harness Clip, automatic close, round hole 6.4 - 7.0 mm, fir tree, high impact modified, heat stabilised, black

Porovnat

AHC336FT6LG-PA66HIRHS-BK 151-01376

Porovnat

Přidat do sledovaných položek

Porovnat

Harness Clip, automatic close, round hole 6.4 - 7.0 mm, fir tree, high impact modified, heat stabilised, black

Porovnat

Přidat do sledovaných položek

700 pcs.

Black (BK) AHC336FT6LG-PA66HIRHS-BK 151-01376

Connector clip for edge, black, 500pcs.

Porovnat

CCIIEC6-MOD-PA66HIRHS-BK 151-01124

Porovnat

Přidat do sledovaných položek

Porovnat

Connector clip for edge, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) CCIIEC6-MOD-PA66HIRHS-BK 151-01124

Cable clip for screw fixation/with pipe/tube holder, ⌀M8, Dmax=29.0mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Screwed Ratchet Clamp SRC150M8 for parallel bundling of cables and tubes.

Porovnat

SRC150M8-PA6GF30-BK 156-02742

Porovnat

Přidat do sledovaných položek

Screwed Ratchet Clamp SRC150M8 for parallel bundling of cables and tubes.

Porovnat

Cable clip for screw fixation/with pipe/tube holder, ⌀M8, Dmax=29.0mm

Porovnat

Přidat do sledovaných položek

150

Black (BK) SRC150M8-PA6GF30-BK 156-02742

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie with pipe/tube holder, inside serrated, ⌀5-30mm, black, 100pcs.

Porovnat

T30ROC5J-PA66HSUV-BK 156-00520

Porovnat

Přidat do sledovaných položek

Porovnat

Fixing tie with pipe/tube holder, inside serrated, ⌀5-30mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) T30ROC5J-PA66HSUV-BK 156-00520

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Porovnat

H7P-PA66HS-BK 211-60006

Porovnat

Přidat do sledovaných položek

Designed with radiused edges to prevent chafing and cutting into insulation.

Porovnat

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) H7P-PA66HS-BK 211-60006

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

ALU11-AL-NA 211-10110

Porovnat

Přidat do sledovaných položek

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Natural (NA) ALU11-AL-NA 211-10110

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

ALU12-AL-NA 211-10120

Porovnat

Přidat do sledovaných položek

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Natural (NA) ALU12-AL-NA 211-10120

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

ALU13-AL-NA 211-10130

Porovnat

Přidat do sledovaných položek

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Natural (NA) ALU13-AL-NA 211-10130

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU17C-AL/CR-BK 211-15170

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU17C-AL/CR-BK 211-15170

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU19C-AL/CR-BK 211-15190

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU19C-AL/CR-BK 211-15190

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

ALU23C P-Clamp with chloroprene insert.

Porovnat

ALU23C-AL/CR-BK 211-15230

Porovnat

Přidat do sledovaných položek

ALU23C P-Clamp with chloroprene insert.

Porovnat

P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU23C-AL/CR-BK 211-15230

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU25C-AL/CR-BK 211-15250

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU25C-AL/CR-BK 211-15250

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU26C-AL/CR-BK 211-15260

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU26C-AL/CR-BK 211-15260

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU28C-AL/CR-BK 211-15280

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU28C-AL/CR-BK 211-15280

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU29C-AL/CR-BK 211-15290

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU29C-AL/CR-BK 211-15290

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU30C-AL/CR-BK 211-15300

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU30C-AL/CR-BK 211-15300

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

ALU8-AL-NA 211-10080

Porovnat

Přidat do sledovaných položek

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Natural (NA) ALU8-AL-NA 211-10080

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Bundling clip for hole (round)/with pipe/tube holder, L=60.4mm, SO=15.0mm, black, 1000pcs.

Porovnat

Halter SFT6.5-PA66HIRHS-BK 133-00067

Porovnat

Přidat do sledovaných položek

Porovnat

Bundling clip for hole (round)/with pipe/tube holder, L=60.4mm, SO=15.0mm, black, 1000pcs.

Porovnat

Přidat do sledovaných položek

1000 pcs.

Black (BK) Halter SFT6.5-PA66HIRHS-BK 133-00067

Fixing tie with pipe/tube holder, inside serrated, ⌀4.0-31.0mm, black, 500pcs.

Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.

Porovnat

T30ROC1A-PA66HS/PA66HIRHS-BK 156-00012

Porovnat

Přidat do sledovaných položek

Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.

Porovnat

Fixing tie with pipe/tube holder, inside serrated, ⌀4.0-31.0mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) T30ROC1A-PA66HS/PA66HIRHS-BK 156-00012

Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, grey, 500pcs.

2-piece fixing tie with OmegaClip for cables or tubes 10-14 mm, 360 degree twistable.

Porovnat

T50SVCOC10-14-PA46-GY 156-01045

Porovnat

Přidat do sledovaných položek

2-piece fixing tie with OmegaClip for cables or tubes 10-14 mm, 360 degree twistable.

Porovnat

Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, grey, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Grey (GY) T50SVCOC10-14-PA46-GY 156-01045

Fixing tie with pipe/tube holder, ⌀15.0-19.0mm, black, 1000pcs.

Porovnat

T50SMVCLOC15-19-PA66HIRHSUV-BK 156-01690

Porovnat

Přidat do sledovaných položek

Porovnat

Fixing tie with pipe/tube holder, ⌀15.0-19.0mm, black, 1000pcs.

Porovnat

Přidat do sledovaných položek

1000 pcs.

Black (BK) T50SMVCLOC15-19-PA66HIRHSUV-BK 156-01690

Fixing tie with pipe/tube holder, ⌀20.0-25.0mm, black, 1000pcs.

The cable tie bundles wires, cables or tubes, and the C-clip snaps onto the tubular frame rail.

Porovnat

T50SMVCLOC20-25-PA66HIRHSUV-BK 156-01714

Porovnat

Přidat do sledovaných položek

The cable tie bundles wires, cables or tubes, and the C-clip snaps onto the tubular frame rail.

Porovnat

Fixing tie with pipe/tube holder, ⌀20.0-25.0mm, black, 1000pcs.

Porovnat

Přidat do sledovaných položek

1000 pcs.

Black (BK) T50SMVCLOC20-25-PA66HIRHSUV-BK 156-01714

Fixing tie with pipe/tube holder, ⌀10.0-14.0mm, black, 1000pcs.

Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.

Porovnat

T50SMVCLOC10-14-PA66HS/PA66HIRHSUV-BK 156-02383

Porovnat

Přidat do sledovaných položek

Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.

Porovnat

Fixing tie with pipe/tube holder, ⌀10.0-14.0mm, black, 1000pcs.

Porovnat

Přidat do sledovaných položek

1000 pcs.

Black (BK) T50SMVCLOC10-14-PA66HS/PA66HIRHSUV-BK 156-02383

Corrugated tube clip for stud, nom⌀17.0mm, black, 500pcs.

Fixing element for convoluted tubes 17 mm with stud fixation 6 mm.

Porovnat

CTC17SBS6-PA66HIRHS-BK 151-00010

Porovnat

Přidat do sledovaných položek

Fixing element for convoluted tubes 17 mm with stud fixation 6 mm.

Porovnat

Corrugated tube clip for stud, nom⌀17.0mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) CTC17SBS6-PA66HIRHS-BK 151-00010

Fixing tie with pipe/tube holder, ⌀5.0-27.0mm, black, 500pcs.

2-piece fixing ties with arrowhead, with wings and pipe clip.

Porovnat

T50XWPM7.0OC15-18CBTO-SD-PA66HS/PA66HIRHS-BK 156-01035

Porovnat

Přidat do sledovaných položek

2-piece fixing ties with arrowhead, with wings and pipe clip.

Porovnat

Fixing tie with pipe/tube holder, ⌀5.0-27.0mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) T50XWPM7.0OC15-18CBTO-SD-PA66HS/PA66HIRHS-BK 156-01035

Fixing tie for stud, inside serrated, ⌀9.5-57.1mm, black, 300pcs.

Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.

Porovnat

WSS250-PA66HIRHSUV-BK 157-00400

Porovnat

Přidat do sledovaných položek

Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.

Porovnat

Fixing tie for stud, inside serrated, ⌀9.5-57.1mm, black, 300pcs.

Porovnat

Přidat do sledovaných položek

300 pcs.

Black (BK) WSS250-PA66HIRHSUV-BK 157-00400

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Porovnat

T50SOSSBD-M8-PA66HSW-BK 157-00039

Porovnat

Přidat do sledovaných položek

Porovnat

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) T50SOSSBD-M8-PA66HSW-BK 157-00039

Fixing tie for stud, ⌀3.0-35.0mm, black, 1000pcs.

LFC-Series for routing cables close to the stud.

Porovnat

LFC165-2-PA66HS-BK 157-00047

Porovnat

Přidat do sledovaných položek

LFC-Series for routing cables close to the stud.

Porovnat

Fixing tie for stud, ⌀3.0-35.0mm, black, 1000pcs.

Porovnat

Přidat do sledovaných položek

1000 pcs.

Black (BK) LFC165-2-PA66HS-BK 157-00047

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.

Porovnat

T50SOSSBU-M8-PA66HSW-GY 157-00066

Porovnat

Přidat do sledovaných položek

Porovnat

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Grey (GY) T50SOSSBU-M8-PA66HSW-GY 157-00066

Fixing tie for stud, inside serrated, ⌀3.0-40.0mm, grey, 500pcs.

SBR8S for M8 threaded studs.

Porovnat

SBR8S-PA46-GY 131-60058

Porovnat

Přidat do sledovaných položek

SBR8S for M8 threaded studs.

Porovnat

Fixing tie for stud, inside serrated, ⌀3.0-40.0mm, grey, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Grey (GY) SBR8S-PA46-GY 131-60058

Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.

One-piece cable tie with oval stud mount.

Porovnat

T50SOSSB5-HIGH-E-PA66HS-BK 155-05400

Porovnat

Přidat do sledovaných položek

One-piece cable tie with oval stud mount.

Porovnat

Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) T50SOSSB5-HIGH-E-PA66HS-BK 155-05400

Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀7.0mm, black, 500pcs.

CNCTC8FT6.5LG Clamps.

Porovnat

CNCTC8FT6.5LG-PA66HIRHS-BK 151-01038

Porovnat

Přidat do sledovaných položek

CNCTC8FT6.5LG Clamps.

Porovnat

Corrugated tube clip for hole (round)/with pipe/tube holder, nom⌀7.0mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) CNCTC8FT6.5LG-PA66HIRHS-BK 151-01038

Corrugated tube clip for hole (oval)/with pipe/tube holder, nom⌀14.4mm, black, 500pcs.

Porovnat

LC9FTOVAL-PA66HIRHS-BK 151-01880

Porovnat

Přidat do sledovaných položek

Porovnat

Corrugated tube clip for hole (oval)/with pipe/tube holder, nom⌀14.4mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) LC9FTOVAL-PA66HIRHS-BK 151-01880

Bundling Clip 34x10 mm, automatic locking, high impact modified, heat stabilised, black

Porovnat

AHC25FT6LG-PA66HIRHS-BK 151-01198

Porovnat

Přidat do sledovaných položek

Porovnat

Bundling Clip 34x10 mm, automatic locking, high impact modified, heat stabilised, black

Porovnat

Přidat do sledovaných položek

1300 pcs.

Black (BK) AHC25FT6LG-PA66HIRHS-BK 151-01198

Fixing element 35x10 mm, high impact modified, heat stabilised, black

Porovnat

AHC223FT6LG-PA66HIRHS-BK 151-01078

Porovnat

Přidat do sledovaných položek

Porovnat

Fixing element 35x10 mm, high impact modified, heat stabilised, black

Porovnat

Přidat do sledovaných položek

1300 pcs.

Black (BK) AHC223FT6LG-PA66HIRHS-BK 151-01078

Connector clip for edge, black, 1000pcs.

Porovnat

EC45-PA66HIRHS-BK 151-00460

Porovnat

Přidat do sledovaných položek

Porovnat

Connector clip for edge, black, 1000pcs.

Porovnat

Přidat do sledovaných položek

1000 pcs.

Black (BK) EC45-PA66HIRHS-BK 151-00460

Connector clip for edge, black, 1000pcs.

Porovnat

EC JAE CC-BK 151-00472

Porovnat

Přidat do sledovaných položek

Porovnat

Connector clip for edge, black, 1000pcs.

Porovnat

Přidat do sledovaných položek

1000 pcs.

Black (BK) EC JAE CC-BK 151-00472

Connector clip for edge, black, 500pcs.

Porovnat

CCEC3.0SV-PA66HIRHS-BK 151-01058

Porovnat

Přidat do sledovaných položek

Porovnat

Connector clip for edge, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) CCEC3.0SV-PA66HIRHS-BK 151-01058

Cable clip for adhesive use/with pipe/tube holder, Dmax=5.0mm

RB5 self-adhesive clip for a quick and easy installation.

Porovnat

RB5-PA66-NA 151-14059

Porovnat

Přidat do sledovaných položek

RB5 self-adhesive clip for a quick and easy installation.

Porovnat

Cable clip for adhesive use/with pipe/tube holder, Dmax=5.0mm

Porovnat

Přidat do sledovaných položek

100 pcs.

Natural (NA) RB5-PA66-NA 151-14059

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

Two RB8 adhesive cable clamps shown.

Porovnat

RB8-PA66-NA 151-14089

Porovnat

Přidat do sledovaných položek

Two RB8 adhesive cable clamps shown.

Porovnat

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

Porovnat

Přidat do sledovaných položek

5000 pcs.

Natural (NA) RB8-PA66-NA 151-14089

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

Two RB8 adhesive cable clamps shown.

Porovnat

RB8-PA66-NA 151-13606

Porovnat

Přidat do sledovaných položek

Two RB8 adhesive cable clamps shown.

Porovnat

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

Porovnat

Přidat do sledovaných položek

100 pcs.

Natural (NA) RB8-PA66-NA 151-13606

Cable clip for adhesive use/with pipe/tube holder, Dmin=14.0mm, Dmax=14.0mm

RB14 self-adhesive clip for a quick and easy installation.

Porovnat

RB14-PA66-BK 151-00502

Porovnat

Přidat do sledovaných položek

RB14 self-adhesive clip for a quick and easy installation.

Porovnat

Cable clip for adhesive use/with pipe/tube holder, Dmin=14.0mm, Dmax=14.0mm

Porovnat

Přidat do sledovaných položek

200 pcs.

Black (BK) RB14-PA66-BK 151-00502

Cable clip for adhesive use/with pipe/tube holder, Dmax=14.0mm

RB14 self-adhesive clip for a quick and easy installation.

Porovnat

RB14-PA66-NA 151-00505

Porovnat

Přidat do sledovaných položek

RB14 self-adhesive clip for a quick and easy installation.

Porovnat

Cable clip for adhesive use/with pipe/tube holder, Dmax=14.0mm

Porovnat

Přidat do sledovaných položek

100 pcs.

Natural (NA) RB14-PA66-NA 151-00505

Cable clip for adhesive use/with pipe/tube holder, Dmax=18.0mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Self adhesive one piece fixing clips RA- & RB-Series.

Porovnat

RA18-PA66-NA 151-13119

Porovnat

Přidat do sledovaných položek

Self adhesive one piece fixing clips RA- & RB-Series.

Porovnat

Cable clip for adhesive use/with pipe/tube holder, Dmax=18.0mm

Porovnat

Přidat do sledovaných položek

100 pcs.

Natural (NA) RA18-PA66-NA 151-13119

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 250pcs.

Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.

Porovnat

T50SVCOC39-45-PA66HS/PA66HIRHS-BK 156-00137

Porovnat

Přidat do sledovaných položek

Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.

Porovnat

Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 250pcs.

Porovnat

Přidat do sledovaných položek

250 pcs.

Black (BK) T50SVCOC39-45-PA66HS/PA66HIRHS-BK 156-00137

Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-50.0mm, black, 250pcs.

Porovnat

T50SMVCOC25-31-PA66HS/PA66HIRHS-BK 156-00303

Porovnat

Přidat do sledovaných položek

Porovnat

Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-50.0mm, black, 250pcs.

Porovnat

Přidat do sledovaných položek

250 pcs.

Black (BK) T50SMVCOC25-31-PA66HS/PA66HIRHS-BK 156-00303

Fixing tie for cable bundles/with pipe/tube holder, inside serrated, ⌀4.0-45.0mm, black, 500pcs.

Reusable clip with Cable tie for multiple bundling of cables in different directions and suitable for pre-installation and replacement in case of maintenance.

Porovnat

T50ROC1A-PA66HS/PA66HIRHS-BK 156-00036

Porovnat

Přidat do sledovaných položek

Reusable clip with Cable tie for multiple bundling of cables in different directions and suitable for pre-installation and replacement in case of maintenance.

Porovnat

Fixing tie for cable bundles/with pipe/tube holder, inside serrated, ⌀4.0-45.0mm, black, 500pcs.

Porovnat

Přidat do sledovaných položek

500 pcs.

Black (BK) T50ROC1A-PA66HS/PA66HIRHS-BK 156-00036

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

ALU10-AL-NA 211-10100

Porovnat

Přidat do sledovaných položek

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Natural (NA) ALU10-AL-NA 211-10100

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU11C-AL/CR-BK 211-15110

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU11C-AL/CR-BK 211-15110

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU13C-AL/CR-BK 211-15130

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU13C-AL/CR-BK 211-15130

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU14C-AL/CR-BK 211-15140

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU14C-AL/CR-BK 211-15140

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU16C-AL/CR-BK 211-15160

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU16C-AL/CR-BK 211-15160

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU18C-AL/CR-BK 211-15180

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU18C-AL/CR-BK 211-15180

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU20C-AL/CR-BK 211-15200

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU20C-AL/CR-BK 211-15200

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU22C-AL/CR-BK 211-15220

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU22C-AL/CR-BK 211-15220

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU24C-AL/CR-BK 211-15240

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.

Porovnat

Přidat do sledovaných položek

50 pcs.

Black (BK) ALU24C-AL/CR-BK 211-15240

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

ALU4-AL-NA 211-10040

Porovnat

Přidat do sledovaných položek

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Natural (NA) ALU4-AL-NA 211-10040

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

ALU4C-AL/CR-BK 211-15040

Porovnat

Přidat do sledovaných položek

P-Clips (Alu) with Rubber Insert for vibration resistance

Porovnat

P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Black (BK) ALU4C-AL/CR-BK 211-15040

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

ALU5-AL-NA 211-10050

Porovnat

Přidat do sledovaných položek

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Porovnat

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.

Porovnat

Přidat do sledovaných položek

100 pcs.

Natural (NA) ALU5-AL-NA 211-10050

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Výsledky pro "cable holder" v Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Czech Republic

Zásady ochrany osobních údajů

Sociální média

© HellermannTyton 2026 (v4.312.3) | Aktualizace: 16/08/2026 | Nastavení ochrany osobních údajů

Hledat prodejce Kontakt

‹ › ×