18/08/2026

Výsledky pro "cable holder" v Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

280 produkty
Resetovat vše
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU5C-AL/CR-BK 211-15050
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
ALU7-AL-NA 211-10070
Porovnat
Přidat do sledovaných položek
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
ALU6-AL-NA 211-10060
Porovnat
Přidat do sledovaných položek
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for hole (round)/with pipe/tube holder, ⌀1.0-30.0mm, black, 500pcs.
T50SCTCFT6.
Porovnat
T50SCTCFT6-PA66HS/PA66HIRHS-BK 156-00253
Porovnat
Přidat do sledovaných položek
T50SCTCFT6.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SCTCFT6-PA66HS/PA66HIRHS-BK 156-00253
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black/natural, 500pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
T50SVC5 rotates in any direction.
Porovnat
T50SVC4S-PA66HS/PP-BK/NA 156-00318
Porovnat
Přidat do sledovaných položek
T50SVC5 rotates in any direction.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK), Natural (NA) T50SVC4S-PA66HS/PP-BK/NA 156-00318
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie with pipe/tube holder, ⌀2.0-50.0mm, grey, 500pcs.
T50SMVCOC19-24,5 rotates in any direction.
Porovnat
T50SMVCOC19-24.5-PA46-GY 156-00577
Porovnat
Přidat do sledovaných položek
T50SMVCOC19-24,5 rotates in any direction.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Grey (GY) T50SMVCOC19-24.5-PA46-GY 156-00577
Cable clip for hole (oval)/with pipe/tube holder, T=0.6 - 6.75mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=5.0mm, Dmax=9.0mm, nom⌀=5.0 mm - 9.0 mm
Disc surrounding the oval fir tree eliminates potential debris and water to enter the panel hole.
Porovnat
LOC5-9FTOVAL-PA66HIRHSUV-BK 151-01306
Porovnat
Přidat do sledovaných položek
Disc surrounding the oval fir tree eliminates potential debris and water to enter the panel hole.
Porovnat
Porovnat
Přidat do sledovaných položek
1700 pcs.
Black (BK) LOC5-9FTOVAL-PA66HIRHSUV-BK 151-01306
Corrugated tube clip for stud, nom⌀10.0mm, black, 500pcs.
Fixing element for convoluted tubes 10 mm with stud fixation 6 mm.
Porovnat
CTC10SBS6-PA66HIRHS-BK 151-00702
Porovnat
Přidat do sledovaných položek
Fixing element for convoluted tubes 10 mm with stud fixation 6 mm.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) CTC10SBS6-PA66HIRHS-BK 151-00702
Fixing tie with pipe/tube holder, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Porovnat
T50ROC1B-PA66HS/PA66HIRHS-BK 156-00306
Porovnat
Přidat do sledovaných položek
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROC1B-PA66HS/PA66HIRHS-BK 156-00306
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 250pcs.
T50SVC5 rotates in any direction.
Porovnat
T50SVCOC31-39-PA66HS/PA66HIRHS-BK 156-00273
Porovnat
Přidat do sledovaných položek
T50SVC5 rotates in any direction.
Porovnat
Porovnat
Přidat do sledovaných položek
250 pcs.
Black (BK) T50SVCOC31-39-PA66HS/PA66HIRHS-BK 156-00273
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-50.0mm, black, 250pcs.
Porovnat
T50SMVCOC39-45-PA66HS/PA66HIRHS-BK 156-00131
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
250 pcs.
Black (BK) T50SMVCOC39-45-PA66HS/PA66HIRHS-BK 156-00131
Connector clip for edge, black, 500pcs.
ConnectorClip for Edges.
Porovnat
Edge-Clip25-PA66HIRHS-BK 133-00075
Porovnat
Přidat do sledovaných položek
ConnectorClip for Edges.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) Edge-Clip25-PA66HIRHS-BK 133-00075
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
The head design offers additional fixing of soft materials.
Porovnat
T50SOSSBH5E-PA66HS-BK 155-05701
Porovnat
Přidat do sledovaných položek
The head design offers additional fixing of soft materials.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SOSSBH5E-PA66HS-BK 155-05701
Fixing tie for stud, inside serrated, ⌀6.4-58.0mm, black, 500pcs.
Provides dual separation between bundles to prevent chafing and abrasion.
Porovnat
DCT11-PA66HIRHSUV-BK 115-31101
Porovnat
Přidat do sledovaných položek
Provides dual separation between bundles to prevent chafing and abrasion.
Porovnat
Porovnat
Přidat do sledovaných položek
500 bag
Black (BK) DCT11-PA66HIRHSUV-BK 115-31101
Fixing tie for stud, inside serrated, ⌀6.4-58.0mm, black, 100pcs.
Provides dual separation between bundles to prevent chafing and abrasion.
Porovnat
DCT11-PA66HIRHSUV-BK 115-00144
Porovnat
Přidat do sledovaných položek
Provides dual separation between bundles to prevent chafing and abrasion.
Porovnat
Porovnat
Přidat do sledovaných položek
100 bag
Black (BK) DCT11-PA66HIRHSUV-BK 115-00144
Fixing tie for stud, inside serrated, ⌀9.0-40.0mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Flexible head wraps around cable bundle for easy installation.
Porovnat
RT50RS5-PA66-BK 115-07110
Porovnat
Přidat do sledovaných položek
Flexible head wraps around cable bundle for easy installation.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) RT50RS5-PA66-BK 115-07110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm
Simple snap in design allows for quick and easy installation or removal of cables.
Porovnat
RB8-PA66-BK 151-13601
Porovnat
Přidat do sledovaných položek
Simple snap in design allows for quick and easy installation or removal of cables.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) RB8-PA66-BK 151-13601
Corrugated tube clip for stud, nom⌀13.0mm, black, 500pcs.
Fixing element for convoluted tubes 10 mm with stud fixation 6 mm.
Porovnat
CTC13SBS6-PA66HIRHS-BK 151-00703
Porovnat
Přidat do sledovaných položek
Fixing element for convoluted tubes 10 mm with stud fixation 6 mm.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) CTC13SBS6-PA66HIRHS-BK 151-00703
Corrugated tube clip for stud, nom⌀4.5mm, black, 500pcs.
The tubing is clicked into the CTC clamp and is held firmly.
Porovnat
CTC4.5SBS6-PA66HIRHS-BK 151-00700
Porovnat
Přidat do sledovaných položek
The tubing is clicked into the CTC clamp and is held firmly.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) CTC4.5SBS6-PA66HIRHS-BK 151-00700
Corrugated tube clip for stud, nom⌀7.5mm, black, 500pcs.
Fixing element for convoluted tubes 17 mm with stud fixation 6 mm.
Porovnat
CTC7.5SBS6-PA66HIRHS-BK 151-00701
Porovnat
Přidat do sledovaných položek
Fixing element for convoluted tubes 17 mm with stud fixation 6 mm.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) CTC7.5SBS6-PA66HIRHS-BK 151-00701
Connector clip, EWCAP-005-7, black, 5000pcs.
Porovnat
EC54-PA66HIRHSUV-BK 151-01042
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
5000 pcs.
Black (BK) EC54-PA66HIRHSUV-BK 151-01042
Cable clip for adhesive use/with pipe/tube holder, Dmax=13.0mm
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Self adhesive one piece fixing clips RA- & RB-Series.
Porovnat
RA13-PA66-NA 151-13021
Porovnat
Přidat do sledovaných položek
Self adhesive one piece fixing clips RA- & RB-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) RA13-PA66-NA 151-13021
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for adhesive use/with pipe/tube holder, Dmax=3.0mm
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Self adhesive one piece fixing clips RA- & RB-Series.
Porovnat
RA3-PA66-NA 151-13018
Porovnat
Přidat do sledovaných položek
Self adhesive one piece fixing clips RA- & RB-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) RA3-PA66-NA 151-13018
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for adhesive use/with pipe/tube holder, Dmax=9.0mm
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Self adhesive one piece fixing clips RA- & RB-Series.
Porovnat
RA9-PA66-NA 151-13020
Porovnat
Přidat do sledovaných položek
Self adhesive one piece fixing clips RA- & RB-Series.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) RA9-PA66-NA 151-13020
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU12C-AL/CR-BK 211-15120
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU12C-AL/CR-BK 211-15120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU15C-AL/CR-BK 211-15150
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU15C-AL/CR-BK 211-15150
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU6C-AL/CR-BK 211-15060
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU6C-AL/CR-BK 211-15060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU7C-AL/CR-BK 211-15070
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU7C-AL/CR-BK 211-15070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU8C-AL/CR-BK 211-15080
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU8C-AL/CR-BK 211-15080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU9C-AL/CR-BK 211-15090
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU9C-AL/CR-BK 211-15090
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie with pipe/tube holder, inside serrated, ⌀2-50.0mm, black, 500pcs.
Porovnat
T50SMVCOC15-18-PA66HS/PA66HIRHS-BK 156-00129
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SMVCOC15-18-PA66HS/PA66HIRHS-BK 156-00129
Connector clip for edge, EWCAP-005-11, black, 500pcs.
Porovnat
EC18-PA66HIRHS-BK 133-00076
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) EC18-PA66HIRHS-BK 133-00076
Connector clip for edge, black, 1000pcs.
Porovnat
EC6mod-PA66HIRHS-BK 151-00464
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) EC6mod-PA66HIRHS-BK 151-00464
Connector clip for edge, EWCAP-005-11, black, 500pcs.
Porovnat
ECC1CPT-PA66HIRHS-BK 151-00499
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) ECC1CPT-PA66HIRHS-BK 151-00499
Connector clip for edge, EWCAP-005-11, black, 5000pcs.
Porovnat
EC46-PA66HIRHSUV-BK 151-01113
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
5000 pcs.
Black (BK) EC46-PA66HIRHSUV-BK 151-01113
Connector clip for hole (round), EWCAP-005-11, black, 5000pcs.
Porovnat
EC52-PA66HIRHSUV-BK 151-01290
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
5000 pcs.
Black (BK) EC52-PA66HIRHSUV-BK 151-01290
Fixing tie for cable bundles/with pipe/tube holder, inside serrated, ⌀1.0-35.0mm, black, 500pcs.
T50SVC5 rotates in any direction.
Porovnat
T50SVC5-PA66HS-BK 155-31202
Porovnat
Přidat do sledovaných položek
T50SVC5 rotates in any direction.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SVC5-PA66HS-BK 155-31202
Fixing tie for stud, outside serrated, ⌀5.0-50.0mm, black, 1500pcs.
The oval stud mount accomodates lateral adjustment for secure attachment.
Porovnat
T50RM6OSSM-PA66HIRHSUV-BK 157-00275
Porovnat
Přidat do sledovaných položek
The oval stud mount accomodates lateral adjustment for secure attachment.
Porovnat
Porovnat
Přidat do sledovaných položek
1500 pcs.
Black (BK) T50RM6OSSM-PA66HIRHSUV-BK 157-00275
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Porovnat
T50SVCOC10-14-PA66HS/PA66HIRHS-BK 156-00134
Porovnat
Přidat do sledovaných položek
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SVCOC10-14-PA66HS/PA66HIRHS-BK 156-00134
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
Porovnat
T50SVCOC19-24.5-PA66HS/PA66HIRHS-BK 156-00136
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SVCOC19-24.5-PA66HS/PA66HIRHS-BK 156-00136
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 250pcs.
T50SMVCOC19-24,5 rotates in any direction.
Porovnat
T50SVCOC25-31-PA66HS/PA66HIRHS-BK 156-00272
Porovnat
Přidat do sledovaných položek
T50SMVCOC19-24,5 rotates in any direction.
Porovnat
Porovnat
Přidat do sledovaných položek
250 pcs.
Black (BK) T50SVCOC25-31-PA66HS/PA66HIRHS-BK 156-00272
Fixing tie with pipe/tube holder, ⌀2.0-50.0mm, black, 500pcs.
Porovnat
T50SMVCOC19-24.5-PA66HS/PA66HIRHS-BK 156-00130
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SMVCOC19-24.5-PA66HS/PA66HIRHS-BK 156-00130
Fixing tie for stud, inside serrated, ⌀6.4-58.0mm, black, 50pcs.
Provides dual separation between bundles to prevent chafing and abrasion.
Porovnat
DCT11-PA66HIRHSUV-BK 115-31100
Porovnat
Přidat do sledovaných položek
Provides dual separation between bundles to prevent chafing and abrasion.
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) DCT11-PA66HIRHSUV-BK 115-31100
Fixing tie for stud, inside serrated, ⌀9.0-40.0mm, black, 100pcs.
Flexible head wraps around cable bundle for easy installation.
Porovnat
T50RS5-PA66-BK 111-07110
Porovnat
Přidat do sledovaných položek
Flexible head wraps around cable bundle for easy installation.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T50RS5-PA66-BK 111-07110
Fixing tie for stud, ⌀1.0-35.0mm, black, 1000pcs.
The T50SSBS50T-E allows very precise routing of cable bundles.
Porovnat
T50SSBS6OT-E-PA66HS-BK 157-00083
Porovnat
Přidat do sledovaných položek
The T50SSBS50T-E allows very precise routing of cable bundles.
Porovnat
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) T50SSBS6OT-E-PA66HS-BK 157-00083
Cable clip for adhesive use/with pipe/tube holder, Dmax=6.0mm
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
RA6 self-adhesive clip for a quick and easy installation.
Porovnat
RA6-PA66-NA 151-13019
Porovnat
Přidat do sledovaných položek
RA6 self-adhesive clip for a quick and easy installation.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) RA6-PA66-NA 151-13019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Connector clip for edge, EWCAP-005-11, black, 500pcs.
Suitable for low vibration routing of cables and tubes with larger bundling diameters.
Porovnat
EC42-PA66HIRHS-BK 151-00429
Porovnat
Přidat do sledovaných položek
Suitable for low vibration routing of cables and tubes with larger bundling diameters.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) EC42-PA66HIRHS-BK 151-00429
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, natural, 1000pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Porovnat
H7P-PA66-NA 211-60079
Porovnat
Přidat do sledovaných položek
P-Clamps H1P - H18P in different dimensions.
Porovnat
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) H7P-PA66-NA 211-60079
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU10C-CR/AL-BK 211-15100
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU10C-CR/AL-BK 211-15100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
One-piece cable tie with oval stud mount.
Porovnat
T50SOSSB6HE-PA66HS-BK 155-46302
Porovnat
Přidat do sledovaných položek
One-piece cable tie with oval stud mount.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SOSSB6HE-PA66HS-BK 155-46302
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
Fixing tie to use on studs and several parts of this product can be fixed on one welding stud due to the flat geometry.
Porovnat
T50SOSWSP5E-2-PA66HS-BK 133-01553
Porovnat
Přidat do sledovaných položek
Fixing tie to use on studs and several parts of this product can be fixed on one welding stud due to the flat geometry.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SOSWSP5E-2-PA66HS-BK 133-01553
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
Fastening ties for 5.0 mm round welding or threaded studs.
Porovnat
T50SOSSBS5E-2-PA66HS-BK 157-00252
Porovnat
Přidat do sledovaných položek
Fastening ties for 5.0 mm round welding or threaded studs.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SOSSBS5E-2-PA66HS-BK 157-00252
Fixing tie for stud, inside serrated, ⌀6.4-33.0mm, black, 500pcs.
Provides dual separation between bundles to prevent chafing and abrasion.
Porovnat
DCT9-PA66HIRHSUV-BK 115-00034
Porovnat
Přidat do sledovaných položek
Provides dual separation between bundles to prevent chafing and abrasion.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) DCT9-PA66HIRHSUV-BK 115-00034
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 1000pcs.
The fixing tie T50SOSSB5-High-E-C-CC for fixation on weld or ISO bolts.
Porovnat
T50SOSSB5-High-E-C-CC-PA66HS-BK 157-00037
Porovnat
Přidat do sledovaných položek
The fixing tie T50SOSSB5-High-E-C-CC for fixation on weld or ISO bolts.
Porovnat
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) T50SOSSB5-High-E-C-CC-PA66HS-BK 157-00037
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 15°, black, 280pcs.
Porovnat
RCB15SM10-PA66HIRHSUV/ST/ZN-BK 151-01449
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB15SM10-PA66HIRHSUV/ST/ZN-BK 151-01449
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 90°, black, 200pcs.
Porovnat
RCA90LM10-PA66HIRHSUV/ST/ZN-BK 151-01438
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCA90LM10-PA66HIRHSUV/ST/ZN-BK 151-01438
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 90°, black, 200pcs.
Porovnat
RCA90LM12-PA66HIRHSUV/ST/ZN-BK 151-01439
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCA90LM12-PA66HIRHSUV/ST/ZN-BK 151-01439
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 90°, black, 300pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
RCA90SM10-PA66HIRHSUV/ST/ZN-BK 151-01435
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) RCA90SM10-PA66HIRHSUV/ST/ZN-BK 151-01435
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 90°, black, 300pcs.
Porovnat
RCA90SM12-PA66HIRHSUV/ST/ZN-BK 151-01436
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) RCA90SM12-PA66HIRHSUV/ST/ZN-BK 151-01436
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 90°, black, 300pcs.
Porovnat
RCA90SM8-PA66HIRHSUV/ST/ZN-BK 151-01434
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) RCA90SM8-PA66HIRHSUV/ST/ZN-BK 151-01434
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
Porovnat
T50SVCOC15-18-PA66HS/PA66HIRHS-BK 156-00135
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SVCOC15-18-PA66HS/PA66HIRHS-BK 156-00135
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
2-piece fixing tie with OmegaClip for cables or tubes 6.5 mm, 360 degree twistable.
Porovnat
T50SVC6.5-PA66HS/PA66HIRHS-BK 156-00155
Porovnat
Přidat do sledovaných položek
2-piece fixing tie with OmegaClip for cables or tubes 6.5 mm, 360 degree twistable.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SVC6.5-PA66HS/PA66HIRHS-BK 156-00155
Fixing tie for cable bundles/with pipe/tube holder, inside serrated, ⌀4.0-31.0mm, black, 500pcs.
Pipe Clip T30ROC2A for post-installation of additional cables for preassembled cable looms.
Porovnat
T30ROC2A-PA66HS/PA66HIRHS-BK 156-00013
Porovnat
Přidat do sledovaných položek
Pipe Clip T30ROC2A for post-installation of additional cables for preassembled cable looms.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T30ROC2A-PA66HS/PA66HIRHS-BK 156-00013
Connector clip for edge, EWCAP-005-11, black, 500pcs.
Porovnat
EC43-PA66HIRHS-BK 151-00430
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) EC43-PA66HIRHS-BK 151-00430
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
Usable for one bolt and stackable for multiple routing and guiding cables and wires in different directions.
Porovnat
T50SOSWSP5E-PA66HS-BK 157-00226
Porovnat
Přidat do sledovaných položek
Usable for one bolt and stackable for multiple routing and guiding cables and wires in different directions.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SOSWSP5E-PA66HS-BK 157-00226
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-50.0mm, black, 500pcs.
T50SMVCOC10-14
Porovnat
T50SMVCOC10-14-PA66HS/PA66HIRHS-BK 156-00128
Porovnat
Přidat do sledovaných položek
T50SMVCOC10-14
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SMVCOC10-14-PA66HS/PA66HIRHS-BK 156-00128
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 15°, black, 280pcs.
Porovnat
RCB15SM12-PA66HIRHSUV/ST/ZN-BK 151-01450
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB15SM12-PA66HIRHSUV/ST/ZN-BK 151-01450
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 15°, black, 280pcs.
Porovnat
RCB15SM6-PA66HIRHSUV/ST/ZN-BK 151-01648
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB15SM6-PA66HIRHSUV/ST/ZN-BK 151-01648
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 15°, black, 280pcs.
Porovnat
RCB15SM8-PA66HIRHSUV/ST/ZN-BK 151-01448
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB15SM8-PA66HIRHSUV/ST/ZN-BK 151-01448
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 90°, black, 200pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
RCA90LM6-PA66HIRHSUV/ST/ZN-BK 151-01644
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCA90LM6-PA66HIRHSUV/ST/ZN-BK 151-01644
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 90°, black, 200pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
RCA90LM8-PA66HIRHSUV/ST/ZN-BK 151-01437
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCA90LM8-PA66HIRHSUV/ST/ZN-BK 151-01437
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 90°, black, 300pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
RCA90SM6-PA66HIRHSUV/ST/ZN-BK 151-01643
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) RCA90SM6-PA66HIRHSUV/ST/ZN-BK 151-01643
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 160pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
RCC180SM8-PA66HIRHSUV/ST/ZN-BK 151-01474
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCC180SM8-PA66HIRHSUV/ST/ZN-BK 151-01474
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Connector clip for edge, EWCAP-005-11, black, 1000pcs.
Porovnat
EC11-PA66HIRHS-BK 155-40602
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) EC11-PA66HIRHS-BK 155-40602
Fixing tie for stud, inside serrated, ⌀4.0-35.0mm, black, 500pcs.
Mount can be used in a wide variety of applications where 5mm weld studs or 5mm ISO bolts.
Porovnat
T50SSBS5OT-E-PA66HS-BK 155-30602
Porovnat
Přidat do sledovaných položek
Mount can be used in a wide variety of applications where 5mm weld studs or 5mm ISO bolts.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SSBS5OT-E-PA66HS-BK 155-30602
Connector clip for hole (oval)/for connector, black, 1000pcs.
For a secure fixation simply push the connector by hand on our Connector Clip YCCFT62x122.
Porovnat
YCCFT62x122-PA66HIRHS-BK 151-00180
Porovnat
Přidat do sledovaných položek
For a secure fixation simply push the connector by hand on our Connector Clip YCCFT62x122.
Porovnat
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) YCCFT62x122-PA66HIRHS-BK 151-00180
Connector clip for edge, black, 1000pcs.
Connector Clips feature various attachment point configurations to accommodate the many connectors on the market.
Porovnat
EC28-PA66HIRHS-BK 151-00151
Porovnat
Přidat do sledovaných položek
Connector Clips feature various attachment point configurations to accommodate the many connectors on the market.
Porovnat
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) EC28-PA66HIRHS-BK 151-00151
Connector clip for edge, EWCAP-005-11, black, 1000pcs.
Connector clip attaches to surfaces with edge clip.
Porovnat
CCEC6-PA66HIRHS-BK 150-92600
Porovnat
Přidat do sledovaných položek
Connector clip attaches to surfaces with edge clip.
Porovnat
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) CCEC6-PA66HIRHS-BK 150-92600
Cable clip for adhesive use/with pipe/tube holder, ⌀3.2 mm, Dmax=3.0mm
Ideal for holding ribbon cables in computer equipment, gaming machines or domestic appliances.
Porovnat
TY8H1S-PA66-NA 151-12819
Porovnat
Přidat do sledovaných položek
Ideal for holding ribbon cables in computer equipment, gaming machines or domestic appliances.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) TY8H1S-PA66-NA 151-12819
Fixing tie for stud, inside serrated, ⌀6.0-26.0mm, black, 560pcs.
LFC165-2 for bundle diameters up to 35.0 mm.
Porovnat
LFC155-PA66-BK 131-60070
Porovnat
Přidat do sledovaných položek
LFC165-2 for bundle diameters up to 35.0 mm.
Porovnat
Porovnat
Přidat do sledovaných položek
560 pcs.
Black (BK) LFC155-PA66-BK 131-60070

Výsledky pro "cable holder" v Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

  Czech Republic

Sociální média

© HellermannTyton 2026 (v4.312.3)  |  Aktualizace: 16/08/2026  |  Nastavení ochrany osobních údajů
Hledat prodejce Kontakt