Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
21/12/2025

Výsledky pro "igh temperature heat shrink tubing"

Nalezeno 5 719 výrobků 1 další položka
Poznámka:  Kombinace hledaných výrazů nevrátila žádné odpovídající výsledky.  Níže jsou výsledky, které odpovídají dílům dle Vašeho vyhledávání.

Typ: Zkuste změnit nebo odstranit výrazy, abyste zlepšili relevanci výsledků vyhledávání.

K dispozici jsou výsledky v následujících kategoriích:
Cable Ties and Fixings

Cable Ties and Fixings  (1693)

Cable Ties Inside Serrated  (159) Cable Ties Outside Serrated  (57) Cable Ties Without Serration  (34) Cable Ties, Releasable  (29) Cable Ties, Stainless Steel  (81) Cable Ties With Fixing Elements  (627) Cable Tie Mounts  (73) Fixing Elements  (233) Clips, Clamps and Plugs  (652)
Cable Ties and Fixings
Cable Ties and Fixings (1693)
Insulation

Insulation  (1369)

Heat Shrink Tubing  (962) Heat Shrinkable Moulded Shapes  (343) Insulating tubes  (73)
Insulation
Insulation (1369)
Cable Protection Systems

Cable Protection Systems  (1272)

Non-Metallic Conduit Systems  (502) Metallic Conduit Systems  (265) Spiral-Reinforced Conduit Systems  (112) Conduit System Accessories  (211) Protective Tubing and Spiral Binding  (158) Expandable Braided Sleeves  (20) Open Woven Sleeves  (19) Burst Protective Sleeves  (1) Electromagnetic Shielding Sleeves  (1) Edge Protection  (8) Grommets  (1) Wiring Ducts and Accessories  (9)
Cable Protection Systems
Cable Protection Systems (1272)
Electrical Installation

Electrical Installation  (148)

Wire Connectors  (3) Downlight Covers  (8) Cable Rods  (1) Electrical Tapes  (22) Cast Resin Technology  (28) Gel Technology  (16) Chemicals  (3) Industrial Silicones  (67)
Electrical Installation
Electrical Installation (148)
Identification Systems

Identification Systems  (1218)

Wire and Cable Markers  (1114) Control Panel Labelling  (112) Industrial Identification  (82) RFID tags and cable ties  (7) Hazardous Area Identification  (8) Printers and Software  (35)
Identification Systems
Identification Systems (1218)
Application Tooling

Application Tooling  (37)

Automatic Cable Tying System  (11) Application Tooling for Heat Shrinkable Tubing  (5) Application Tooling for Non Shrinkable Tubing  (16) Application Tooling for Braided Sleeves  (3) Application Tooling for Identification  (2)
Application Tooling
Application Tooling (37)
5 719 produkty
Resetovat vše
Fixing tie for hole (round), outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Porovnat
Fixing tie for hole (round), outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSFT6-PA66HS/PA66HIRHS-BK 156-00076
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROSFT6-PA66HS/PA66HIRHS-BK 156-00076
Fixing tie for hole (round), inside serrated, ⌀5.0-75.0mm, black, 500pcs.
These fir tree fixings can also be used in threaded, blind holes.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀5.0-75.0mm, black, 500pcs.
T80IFT6LG-PA66HS/PA66HIRHS-BK 150-31096
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T80IFT6LG-PA66HS/PA66HIRHS-BK 150-31096
Cable clip, T=0.6 - 9.0mm, ⌀6.5 mm, Dmin=12.70mm, Dmax=19.56mm
High-performing round fir trees mean no additional fastener is needed for mounting.
Porovnat
Cable clip, T=0.6 - 9.0mm, ⌀6.5 mm, Dmin=12.70mm, Dmax=19.56mm
IRCBFT6.5LG-PA66HIRHSUV-BK 156-02707
Porovnat
Přidat do sledovaných položek
25
Black (BK) IRCBFT6.5LG-PA66HIRHSUV-BK 156-02707
Cable clip for adhesive use/with pipe/tube holder, Dmin=12.70mm, Dmax=19.56mm
The self adhesive mount of Ratchet -P-Clamp series creates an incredible bond with mounting surface.
Porovnat
Cable clip for adhesive use/with pipe/tube holder, Dmin=12.70mm, Dmax=19.56mm
IRCBMB5A-PA66HIRHSUV-BK 156-02634
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
250 pcs.
Black (BK) IRCBMB5A-PA66HIRHSUV-BK 156-02634
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for screw fixation, inside serrated, ⌀5.0-105.0mm, black
These HDM (Heavy duty mount) are suitable for assembling on screws.
Porovnat
Fixing tie for screw fixation, inside serrated, ⌀5.0-105.0mm, black
T120ROSHDMP6SET-PA66HIRHS/PA66HS-BK 156-00885
Porovnat
Přidat do sledovaných položek
Black (BK) T120ROSHDMP6SET-PA66HIRHS/PA66HS-BK 156-00885
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
T50SVC5, T50SVC4
Porovnat
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
T50SVC4-PA66HS/PA66HIRHS-BK 156-00447
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SVC4-PA66HS/PA66HIRHS-BK 156-00447
Cable tie inside serrated, 205.0x4.7mm, ⌀1.5-55.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 205.0x4.7mm, ⌀1.5-55.0mm, black, 100pcs.
T80R-PA66HS-BK 111-08005
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T80R-PA66HS-BK 111-08005
Cable tie inside serrated, 101x2.7mm, ⌀1-22mm, black, 1000pcs.
Porovnat
Cable tie inside serrated, 101x2.7mm, ⌀1-22mm, black, 1000pcs.
Z20R-PA66HSW-BK 107-00010
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) Z20R-PA66HSW-BK 107-00010
Cable tie inside serrated, 301x5mm, ⌀1.5-80mm, black, 100pcs.
Porovnat
Cable tie inside serrated, 301x5mm, ⌀1.5-80mm, black, 100pcs.
Z80I-PA66HSW-BK 107-00006
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) Z80I-PA66HSW-BK 107-00006
Cable tie inside serrated, 400x5.2mm, ⌀3-110mm, black, 100pcs.
Porovnat
Cable tie inside serrated, 400x5.2mm, ⌀3-110mm, black, 100pcs.
Z80L-PA66HSW-BK 107-00012
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) Z80L-PA66HSW-BK 107-00012
Omegaclip 1-PA66HIRHS-BK
Porovnat
Omegaclip 1-PA66HIRHS-BK
Omegaclip 1-PA66HIRHS-BK 151-00007
Porovnat
Přidat do sledovaných položek
10000 pcs.
Black (BK) Omegaclip 1-PA66HIRHS-BK 151-00007
Cable clip, T=0.65 - 0.85 mm
0.6 - 4.2mm, ⌀4.9 – 5.1 mm/6.4 - 7.0 mm
Couple Connector for hole 4.9 - 5.1 mm and for hole 6.4- 7.0 mm.
Porovnat
Cable clip, T=0.65 - 0.85 mm
0.6 - 4.2mm, ⌀4.9 – 5.1 mm/6.4 - 7.0 mm
AH5.0FT6.7-PA66HIRHS-BK 151-03386
Porovnat
Přidat do sledovaných položek
2500 pcs.
Black (BK) AH5.0FT6.7-PA66HIRHS-BK 151-03386
Cable tie inside serrated, 101.6x2.5mm, ⌀1.6-13.0mm, black, 100pcs.
The Clamp Tie head design contains clamping rails to provide full circumferential compression around bundles.
Porovnat
Cable tie inside serrated, 101.6x2.5mm, ⌀1.6-13.0mm, black, 100pcs.
CTT20R-PA66-BK 112-51900
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) CTT20R-PA66-BK 112-51900
Fitting for corrugated tubing, nom⌀28mm, black, 3pcs.
HGL-R Reducer with conduit seal, IP68.
Porovnat
Fitting for corrugated tubing, nom⌀28mm, black, 3pcs.
HGL28-R42-PA66/TPE-BK 166-25108
Porovnat
Přidat do sledovaných položek
3 pcs.
Black (BK) HGL28-R42-PA66/TPE-BK 166-25108
Fitting for corrugated tubing, nom⌀21mm, black, 3pcs.
HGL-R Reducer with conduit seal, IP68.
Porovnat
Fitting for corrugated tubing, nom⌀21mm, black, 3pcs.
HGL21-R42-PA66/TPE-BK 166-25109
Porovnat
Přidat do sledovaných položek
3 pcs.
Black (BK) HGL21-R42-PA66/TPE-BK 166-25109
Fitting for corrugated tubing, nom⌀16mm, black, 5pcs.
HelaGuard HG-Y, Y-Connector, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀16mm, black, 5pcs.
HG16-Y13-PA66/TPE-BK 166-25801
Porovnat
Přidat do sledovaných položek
5 pcs.
Black (BK) HG16-Y13-PA66/TPE-BK 166-25801
Fitting for corrugated tubing, nom⌀21mm, black, 3pcs.
HelaGuard HG-Y, Y-Connector, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀21mm, black, 3pcs.
HG21-Y16-PA66/TPE-BK 166-25802
Porovnat
Přidat do sledovaných položek
3 pcs.
Black (BK) HG21-Y16-PA66/TPE-BK 166-25802
Fitting for corrugated tubing, nom⌀28mm, black, 3pcs.
HelaGuard HG-Y, Y-Connector, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀28mm, black, 3pcs.
HG28-Y21-PA66/TPE-BK 166-25803
Porovnat
Přidat do sledovaných položek
3 pcs.
Black (BK) HG28-Y21-PA66/TPE-BK 166-25803
Cable marker, ⌀4.0-9.0mm, yellow, reel=1000pcs.
Clearly a better way to identify in confined spaces.
Porovnat
Cable marker, ⌀4.0-9.0mm, yellow, reel=1000pcs.
HG1-3-PVC-YE 523-00105
Porovnat
Přidat do sledovaných položek
1000 pcs.
Yellow (YE) HG1-3-PVC-YE 523-00105
Cable marker, ⌀2.2-5.0mm, yellow, reel=1000pcs.
Clearly a better way to identify in confined spaces.
Porovnat
Cable marker, ⌀2.2-5.0mm, yellow, reel=1000pcs.
HG2-5-PVC-YE 523-00219
Porovnat
Přidat do sledovaných položek
1000 reel
Yellow (YE) HG2-5-PVC-YE 523-00219
Fitting for corrugated tubing, nom⌀11mm, PG7, black, 10pcs.
HelaGuard HG-S Straight, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀11mm, PG7, black, 10pcs.
HG11-S-PG7-PA66-BK 166-21032
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG11-S-PG7-PA66-BK 166-21032
Fitting for corrugated tubing, nom⌀34mm, black, 10pcs.
HelaGuard HG-SFL Straight Swivel Flange, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀34mm, black, 10pcs.
HG34-SFL-PA66-BK 166-21203
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG34-SFL-PA66-BK 166-21203
Fitting for corrugated tubing, nom⌀42mm, black, 2pcs.
HelaGuard HG-SFL Straight Swivel Flange, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀42mm, black, 2pcs.
HG42-SFL-PA66-BK 166-21204
Porovnat
Přidat do sledovaných položek
2 pcs.
Black (BK) HG42-SFL-PA66-BK 166-21204
Fitting for corrugated tubing, nom⌀16mm, PG9, black, 10pcs.
HelaGuard HG-SM Straight Swivel External Thread, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀16mm, PG9, black, 10pcs.
HG16-SM-PG9-PA66/NPB-BK 166-21310
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG16-SM-PG9-PA66/NPB-BK 166-21310
Fitting for corrugated tubing, nom⌀67mm, M63, black, 1pc.
HelaGuard HG-SM Straight Swivel External Thread, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀67mm, M63, black, 1pc.
HG67-SM-M63-PA66/NPB-BK 166-21308
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) HG67-SM-M63-PA66/NPB-BK 166-21308
Fitting for corrugated tubing, nom⌀67mm, M63, black, 1pc.
HelaGuard HGL-S Straight with conduit seal, IP68.
Porovnat
Fitting for corrugated tubing, nom⌀67mm, M63, black, 1pc.
HGL67-S-M63-PA66/TPE-BK 166-21654
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) HGL67-S-M63-PA66/TPE-BK 166-21654
Fitting for corrugated tubing, nom⌀16mm, 45°, black, 10pcs.
HelaGuard HG-45FL 45° Elbow Swivel Flange, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀16mm, 45°, black, 10pcs.
HG16-45FL-PA66-BK 166-23600
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG16-45FL-PA66-BK 166-23600
Fitting for corrugated tubing, nom⌀21mm, 45°, black, 10pcs.
HelaGuard HG-45FL 45° Elbow Swivel Flange, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀21mm, 45°, black, 10pcs.
HG21-45FL-PA66-BK 166-23601
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG21-45FL-PA66-BK 166-23601
Fitting for corrugated tubing, nom⌀28mm, 45°, black, 10pcs.
HelaGuard HG-45FL 45° Elbow Swivel Flange, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀28mm, 45°, black, 10pcs.
HG28-45FL-PA66-BK 166-23602
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG28-45FL-PA66-BK 166-23602
Fitting for corrugated tubing, nom⌀34mm, 45°, black, 10pcs.
HelaGuard HG-45FL 45° Elbow Swivel Flange, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀34mm, 45°, black, 10pcs.
HG34-45FL-PA66-BK 166-23603
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG34-45FL-PA66-BK 166-23603
Fitting for corrugated tubing, nom⌀42mm, 45°, black, 2pcs.
HelaGuard HG-45FL 45° Elbow Swivel Flange, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀42mm, 45°, black, 2pcs.
HG42-45FL-PA66-BK 166-23604
Porovnat
Přidat do sledovaných položek
2 pcs.
Black (BK) HG42-45FL-PA66-BK 166-23604
Fitting for corrugated tubing, nom⌀20mm, black, 3pcs.
HelaGuard HG-T, T-Connector, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀20mm, black, 3pcs.
HG20-T-PA66-BK 166-24801
Porovnat
Přidat do sledovaných položek
3 pcs.
Black (BK) HG20-T-PA66-BK 166-24801
Fitting for corrugated tubing, nom⌀13mm, black, 10pcs.
HG-R Reducer.
Porovnat
Fitting for corrugated tubing, nom⌀13mm, black, 10pcs.
HG13-R16-PA66-BK 166-25000
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG13-R16-PA66-BK 166-25000
Fitting for corrugated tubing, nom⌀13mm, black, 10pcs.
HG-R Reducer.
Porovnat
Fitting for corrugated tubing, nom⌀13mm, black, 10pcs.
HG13-R21-PA66-BK 166-25001
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG13-R21-PA66-BK 166-25001
Fitting for corrugated tubing, nom⌀16mm, black, 5pcs.
HG-R Reducer.
Porovnat
Fitting for corrugated tubing, nom⌀16mm, black, 5pcs.
HG16-R21-PA66-BK 166-25002
Porovnat
Přidat do sledovaných položek
5 pcs.
Black (BK) HG16-R21-PA66-BK 166-25002
Fitting for corrugated tubing, nom⌀25mm, black, 5pcs.
HG-R Reducer.
Porovnat
Fitting for corrugated tubing, nom⌀25mm, black, 5pcs.
HG25-R28-PA66-BK 166-25003
Porovnat
Přidat do sledovaných položek
5 pcs.
Black (BK) HG25-R28-PA66-BK 166-25003
Fitting for corrugated tubing, nom⌀21mm, black, 5pcs.
HG-R Reducer.
Porovnat
Fitting for corrugated tubing, nom⌀21mm, black, 5pcs.
HG21-R28-PA66-BK 166-25004
Porovnat
Přidat do sledovaných položek
5 pcs.
Black (BK) HG21-R28-PA66-BK 166-25004
Fitting for corrugated tubing, nom⌀16mm, black, 5pcs.
HG-R Reducer.
Porovnat
Fitting for corrugated tubing, nom⌀16mm, black, 5pcs.
HG16-R34-PA66-BK 166-25005
Porovnat
Přidat do sledovaných položek
5 pcs.
Black (BK) HG16-R34-PA66-BK 166-25005
Fitting for corrugated tubing, nom⌀28mm, black, 5pcs.
HG-R Reducer.
Porovnat
Fitting for corrugated tubing, nom⌀28mm, black, 5pcs.
HG28-R34-PA66-BK 166-25006
Porovnat
Přidat do sledovaných položek
5 pcs.
Black (BK) HG28-R34-PA66-BK 166-25006
Fitting for corrugated tubing, nom⌀21mm, black, 5pcs.
HG-R Reducer.
Porovnat
Fitting for corrugated tubing, nom⌀21mm, black, 5pcs.
HG21-R34-PA66-BK 166-25007
Porovnat
Přidat do sledovaných položek
5 pcs.
Black (BK) HG21-R34-PA66-BK 166-25007
Fitting for corrugated tubing, nom⌀34mm, black, 3pcs.
HG-R Reducer.
Porovnat
Fitting for corrugated tubing, nom⌀34mm, black, 3pcs.
HG34-R42-PA66-BK 166-25008
Porovnat
Přidat do sledovaných položek
3 pcs.
Black (BK) HG34-R42-PA66-BK 166-25008
Fitting for corrugated tubing, nom⌀28mm, black, 3pcs.
HG-R Reducer.
Porovnat
Fitting for corrugated tubing, nom⌀28mm, black, 3pcs.
HG28-R42-PA66-BK 166-25009
Porovnat
Přidat do sledovaných položek
3 pcs.
Black (BK) HG28-R42-PA66-BK 166-25009
Fitting for corrugated tubing, nom⌀21mm, black, 3pcs.
HG-R Reducer.
Porovnat
Fitting for corrugated tubing, nom⌀21mm, black, 3pcs.
HG21-R42-PA66-BK 166-25010
Porovnat
Přidat do sledovaných položek
3 pcs.
Black (BK) HG21-R42-PA66-BK 166-25010
Fitting for corrugated tubing, nom⌀13mm, black, 10pcs.
HGL-R Reducer with conduit seal, IP68.
Porovnat
Fitting for corrugated tubing, nom⌀13mm, black, 10pcs.
HGL13-R16-PA66/TPE-BK 166-25100
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HGL13-R16-PA66/TPE-BK 166-25100
Fitting for corrugated tubing, nom⌀16mm, black, 5pcs.
HGL-R Reducer with conduit seal, IP68.
Porovnat
Fitting for corrugated tubing, nom⌀16mm, black, 5pcs.
HGL16-R21-PA66/TPE-BK 166-25101
Porovnat
Přidat do sledovaných položek
5 pcs.
Black (BK) HGL16-R21-PA66/TPE-BK 166-25101
Fitting for corrugated tubing, nom⌀21mm, black, 5pcs.
HGL-R Reducer with conduit seal, IP68.
Porovnat
Fitting for corrugated tubing, nom⌀21mm, black, 5pcs.
HGL21-R28-PA66/TPE-BK 166-25102
Porovnat
Přidat do sledovaných položek
5 pcs.
Black (BK) HGL21-R28-PA66/TPE-BK 166-25102
Fitting for corrugated tubing, nom⌀16mm, black, 5pcs.
HGL-R Reducer with conduit seal, IP68.
Porovnat
Fitting for corrugated tubing, nom⌀16mm, black, 5pcs.
HGL16-R28-PA66/TPE-BK 166-25103
Porovnat
Přidat do sledovaných položek
5 pcs.
Black (BK) HGL16-R28-PA66/TPE-BK 166-25103
Fitting for corrugated tubing, nom⌀28mm, black, 5pcs.
HGL-R Reducer with conduit seal, IP68.
Porovnat
Fitting for corrugated tubing, nom⌀28mm, black, 5pcs.
HGL28-R34-PA66/TPE-BK 166-25104
Porovnat
Přidat do sledovaných položek
5 pcs.
Black (BK) HGL28-R34-PA66/TPE-BK 166-25104
Fitting for corrugated tubing, nom⌀21mm, black, 5pcs.
HGL-R Reducer with conduit seal, IP68.
Porovnat
Fitting for corrugated tubing, nom⌀21mm, black, 5pcs.
HGL21-R34-PA66/TPE-BK 166-25105
Porovnat
Přidat do sledovaných položek
5 pcs.
Black (BK) HGL21-R34-PA66/TPE-BK 166-25105
Fitting for corrugated tubing, nom⌀16mm, black, 5pcs.
HelaGuard HG-SW for industrial applications.
Porovnat
Fitting for corrugated tubing, nom⌀16mm, black, 5pcs.
HGL16-R34-PA66/TPE-BK 166-25106
Porovnat
Přidat do sledovaných položek
5 pcs.
Black (BK) HGL16-R34-PA66/TPE-BK 166-25106
Fitting for corrugated tubing, nom⌀34mm, black, 3pcs.
HGL-R Reducer with conduit seal, IP68.
Porovnat
Fitting for corrugated tubing, nom⌀34mm, black, 3pcs.
HGL34-R42-PA66/TPE-BK 166-25107
Porovnat
Přidat do sledovaných položek
3 pcs.
Black (BK) HGL34-R42-PA66/TPE-BK 166-25107
Fitting for corrugated tubing, nom⌀34mm, black, 2pcs.
HelaGuard HG-Y, Y-Connector, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀34mm, black, 2pcs.
HG34-Y28-PA66/TPE-BK 166-25804
Porovnat
Přidat do sledovaných položek
2 pcs.
Black (BK) HG34-Y28-PA66/TPE-BK 166-25804
Fitting for corrugated tubing, nom⌀16mm, black, 5pcs.
HelaGuard HGL-Y, Y-Connector with conduit seals.
Porovnat
Fitting for corrugated tubing, nom⌀16mm, black, 5pcs.
HGL16-Y13-PA66/TPE-BK 166-25901
Porovnat
Přidat do sledovaných položek
5 pcs.
Black (BK) HGL16-Y13-PA66/TPE-BK 166-25901
Fitting for corrugated tubing, nom⌀21mm, black, 3pcs.
HelaGuard HGL-Y, Y-Connector with conduit seals.
Porovnat
Fitting for corrugated tubing, nom⌀21mm, black, 3pcs.
HGL21-Y16-PA66/TPE-BK 166-25902
Porovnat
Přidat do sledovaných položek
3 pcs.
Black (BK) HGL21-Y16-PA66/TPE-BK 166-25902
Fitting for corrugated tubing, nom⌀28mm, black, 3pcs.
HelaGuard HGL-Y, Y-Connector with conduit seals.
Porovnat
Fitting for corrugated tubing, nom⌀28mm, black, 3pcs.
HGL28-Y21-PA66/TPE-BK 166-25903
Porovnat
Přidat do sledovaných položek
3 pcs.
Black (BK) HGL28-Y21-PA66/TPE-BK 166-25903
Fitting for corrugated tubing, nom⌀34mm, black, 2pcs.
HelaGuard HGL-Y, Y-Connector with conduit seals.
Porovnat
Fitting for corrugated tubing, nom⌀34mm, black, 2pcs.
HGL34-Y28-PA66/TPE-BK 166-25904
Porovnat
Přidat do sledovaných položek
2 pcs.
Black (BK) HGL34-Y28-PA66/TPE-BK 166-25904
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 15°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 15°, black, 280pcs.
RCB15SM10-PA66HIRHSUV/ST/ZN-BK 151-01449
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB15SM10-PA66HIRHSUV/ST/ZN-BK 151-01449
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 15°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 15°, black, 280pcs.
RCB15SM12-PA66HIRHSUV/ST/ZN-BK 151-01450
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB15SM12-PA66HIRHSUV/ST/ZN-BK 151-01450
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 15°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 15°, black, 280pcs.
RCB15SM6-PA66HIRHSUV/ST/ZN-BK 151-01648
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB15SM6-PA66HIRHSUV/ST/ZN-BK 151-01648
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 15°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 15°, black, 280pcs.
RCB15SM8-PA66HIRHSUV/ST/ZN-BK 151-01448
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB15SM8-PA66HIRHSUV/ST/ZN-BK 151-01448
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Porovnat
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 200pcs.
RCB180LM10-PA66HIRHSUV/ST/ZN-BK 151-01446
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB180LM10-PA66HIRHSUV/ST/ZN-BK 151-01446
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Porovnat
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 180°, black, 200pcs.
RCB180LM12-PA66HIRHSUV/ST/ZN-BK 151-01447
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB180LM12-PA66HIRHSUV/ST/ZN-BK 151-01447
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Porovnat
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 200pcs.
RCB180LM6-PA66HIRHSUV/ST/ZN-BK 151-01647
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB180LM6-PA66HIRHSUV/ST/ZN-BK 151-01647
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Porovnat
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 200pcs.
RCB180LM8-PA66HIRHSUV/ST/ZN-BK 151-01445
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB180LM8-PA66HIRHSUV/ST/ZN-BK 151-01445
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 200pcs.
Porovnat
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 200pcs.
RCB180MM10-PA66HIRHSUV/ST/ZN-BK 151-01443
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB180MM10-PA66HIRHSUV/ST/ZN-BK 151-01443
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 180°, black, 200pcs.
Porovnat
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 180°, black, 200pcs.
RCB180MM12-PA66HIRHSUV/ST/ZN-BK 151-01444
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB180MM12-PA66HIRHSUV/ST/ZN-BK 151-01444
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 200pcs.
Porovnat
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 200pcs.
RCB180MM6-PA66HIRHSUV/ST/ZN-BK 151-01646
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB180MM6-PA66HIRHSUV/ST/ZN-BK 151-01646
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 200pcs.
Porovnat
P-clamp medium, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 180°, black, 200pcs.
RCB180MM8-PA66HIRHSUV/ST/ZN-BK 151-01442
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB180MM8-PA66HIRHSUV/ST/ZN-BK 151-01442
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 180°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 180°, black, 280pcs.
RCB180SM12-PA66HIRHSUV/ST/ZN-BK 151-01441
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB180SM12-PA66HIRHSUV/ST/ZN-BK 151-01441
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 280pcs.
RCB180SM6-PA66HIRHSUV/ST/ZN-BK 151-01645
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB180SM6-PA66HIRHSUV/ST/ZN-BK 151-01645
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 5pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 5pcs.
RCB180SM6-PA66HIRHSUV/ST/ZN-BK 151-01671
Porovnat
Přidat do sledovaných položek
5
Black (BK) RCB180SM6-PA66HIRHSUV/ST/ZN-BK 151-01671
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 30°, black, 200pcs.
Porovnat
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 30°, black, 200pcs.
RCB30LM10-PA66HIRHSUV/ST/ZN-BK 151-01455
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB30LM10-PA66HIRHSUV/ST/ZN-BK 151-01455
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 30°, black, 200pcs.
Porovnat
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 30°, black, 200pcs.
RCB30LM12-PA66HIRHSUV/ST/ZN-BK 151-01456
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB30LM12-PA66HIRHSUV/ST/ZN-BK 151-01456
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 30°, black, 200pcs.
Porovnat
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 30°, black, 200pcs.
RCB30LM6-PA66HIRHSUV/ST/ZN-BK 151-01650
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB30LM6-PA66HIRHSUV/ST/ZN-BK 151-01650
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 30°, black, 200pcs.
Porovnat
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 30°, black, 200pcs.
RCB30LM8-PA66HIRHSUV/ST/ZN-BK 151-01454
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB30LM8-PA66HIRHSUV/ST/ZN-BK 151-01454
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 30°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 30°, black, 280pcs.
RCB30SM10-PA66HIRHSUV/ST/ZN-BK 151-01452
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB30SM10-PA66HIRHSUV/ST/ZN-BK 151-01452
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 30°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 30°, black, 280pcs.
RCB30SM12-PA66HIRHSUV/ST/ZN-BK 151-01453
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB30SM12-PA66HIRHSUV/ST/ZN-BK 151-01453
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 30°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 30°, black, 280pcs.
RCB30SM6-PA66HIRHSUV/ST/ZN-BK 151-01649
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB30SM6-PA66HIRHSUV/ST/ZN-BK 151-01649
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 30°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 30°, black, 280pcs.
RCB30SM8-PA66HIRHSUV/ST/ZN-BK 151-01451
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB30SM8-PA66HIRHSUV/ST/ZN-BK 151-01451
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 90°, black, 200pcs.
Porovnat
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 90°, black, 200pcs.
RCB90LM10-PA66HIRHSUV/ST/ZN-BK 151-01461
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB90LM10-PA66HIRHSUV/ST/ZN-BK 151-01461
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 90°, black, 200pcs.
Porovnat
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 90°, black, 200pcs.
RCB90LM12-PA66HIRHSUV/ST/ZN-BK 151-01462
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB90LM12-PA66HIRHSUV/ST/ZN-BK 151-01462
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 90°, black, 200pcs.
Porovnat
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 90°, black, 200pcs.
RCB90LM6-PA66HIRHSUV/ST/ZN-BK 151-01652
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB90LM6-PA66HIRHSUV/ST/ZN-BK 151-01652
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 90°, black, 200pcs.
Porovnat
P-clamp long, Dmin=12.7mm, Dmax=19.5mm, ⌀8.31 mm, 90°, black, 200pcs.
RCB90LM8-PA66HIRHSUV/ST/ZN-BK 151-01460
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCB90LM8-PA66HIRHSUV/ST/ZN-BK 151-01460
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 90°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 90°, black, 280pcs.
RCB90SM10-PA66HIRHSUV/ST/ZN-BK 151-01458
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB90SM10-PA66HIRHSUV/ST/ZN-BK 151-01458
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 90°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀12.95 mm, 90°, black, 280pcs.
RCB90SM12-PA66HIRHSUV/ST/ZN-BK 151-01459
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB90SM12-PA66HIRHSUV/ST/ZN-BK 151-01459
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 90°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 90°, black, 280pcs.
RCB90SM6-PA66HIRHSUV/ST/ZN-BK 151-01651
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB90SM6-PA66HIRHSUV/ST/ZN-BK 151-01651
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 15°, black, 300pcs.
Ratchet P-Clamp 15 Degree Angle
Porovnat
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 15°, black, 300pcs.
RCA15SM10-PA66HIRHSUV/ST/ZN-BK 151-01426
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) RCA15SM10-PA66HIRHSUV/ST/ZN-BK 151-01426
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 15°, black, 300pcs.
Ratchet P-Clamp 15 Degree Angle
Porovnat
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 15°, black, 300pcs.
RCA15SM12-PA66HIRHSUV/ST/ZN-BK 151-01427
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) RCA15SM12-PA66HIRHSUV/ST/ZN-BK 151-01427
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 15°, black, 300pcs.
Ratchet P-Clamp 15 Degree Angle
Porovnat
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 15°, black, 300pcs.
RCA15SM6-PA66HIRHSUV/ST/ZN-BK 151-01640
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) RCA15SM6-PA66HIRHSUV/ST/ZN-BK 151-01640
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 15°, black, 300pcs.
Ratchet P-Clamp 15 Degree Angle
Porovnat
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 15°, black, 300pcs.
RCA15SM8-PA66HIRHSUV/ST/ZN-BK 151-01425
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) RCA15SM8-PA66HIRHSUV/ST/ZN-BK 151-01425
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Porovnat
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 180°, black, 200pcs.
RCA180LM10-PA66HIRHSUV/ST/ZN-BK 151-01423
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCA180LM10-PA66HIRHSUV/ST/ZN-BK 151-01423
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Porovnat
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 180°, black, 200pcs.
RCA180LM12-PA66HIRHSUV/ST/ZN-BK 151-01424
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCA180LM12-PA66HIRHSUV/ST/ZN-BK 151-01424
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Porovnat
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 200pcs.
RCA180LM6-PA66HIRHSUV/ST/ZN-BK 151-01639
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCA180LM6-PA66HIRHSUV/ST/ZN-BK 151-01639
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Porovnat
P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 200pcs.
RCA180LM8-PA66HIRHSUV/ST/ZN-BK 151-01422
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCA180LM8-PA66HIRHSUV/ST/ZN-BK 151-01422
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Porovnat
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 180°, black, 200pcs.
RCA180MM10-PA66HIRHSUV/ST/ZN-BK 151-01420
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCA180MM10-PA66HIRHSUV/ST/ZN-BK 151-01420
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Porovnat
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 180°, black, 200pcs.
RCA180MM12-PA66HIRHSUV/ST/ZN-BK 151-01421
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCA180MM12-PA66HIRHSUV/ST/ZN-BK 151-01421
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Porovnat
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 180°, black, 200pcs.
RCA180MM6-PA66HIRHSUV/ST/ZN-BK 151-01638
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCA180MM6-PA66HIRHSUV/ST/ZN-BK 151-01638
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 200pcs.
One-piece ratchet closure allows for easy installation before, during or after final assembly.
Porovnat
P-clamp medium, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 180°, black, 200pcs.
RCA180MM8-PA66HIRHSUV/ST/ZN-BK 151-01419
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RCA180MM8-PA66HIRHSUV/ST/ZN-BK 151-01419
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 180°, black, 300pcs.
RCA180SM10.
Porovnat
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 180°, black, 300pcs.
RCA180SM10-PA66HIRHSUV/ST/ZN-BK 151-01417
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) RCA180SM10-PA66HIRHSUV/ST/ZN-BK 151-01417
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 180°, black, 300pcs.
Porovnat
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀12.95 mm, 180°, black, 300pcs.
RCA180SM12-PA66HIRHSUV/ST/ZN-BK 151-01418
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) RCA180SM12-PA66HIRHSUV/ST/ZN-BK 151-01418
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Facebook  Instagram  Twitter  YouTube  LinkedIn  Corporate Blog 
Kontakt VOP Impressum Mapa stránek Newsletter Pokyny a závazky Zásady ochrany osobních údajů
Aktualizace: 14/12/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.293.4) | Aktualizace: 14/12/2025 | Nastavení ochrany osobních údajů
Hledat prodejce Kontakt