Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
30/08/2025

Výsledky pro "igh temperature heat shrink tubing"

Nalezeno 6 043 výrobků 1 další položka
Poznámka:  Kombinace hledaných výrazů nevrátila žádné odpovídající výsledky.  Níže jsou výsledky, které odpovídají dílům dle Vašeho vyhledávání.

Typ: Zkuste změnit nebo odstranit výrazy, abyste zlepšili relevanci výsledků vyhledávání.

K dispozici jsou výsledky v následujících kategoriích:
Cable Ties and Fixings

Cable Ties and Fixings  (1691)

Cable Ties Inside Serrated  (159) Cable Ties Outside Serrated  (57) Cable Ties Without Serration  (34) Cable Ties, Releasable  (29) Cable Ties, Stainless Steel  (81) Cable Ties With Fixing Elements  (626) Cable Tie Mounts  (74) Fixing Elements  (234) Clips, Clamps and Plugs  (650)
Cable Ties and Fixings
Cable Ties and Fixings (1691)
Insulation

Insulation  (1369)

Heat Shrink Tubing  (962) Heat Shrinkable Moulded Shapes  (343) Insulating tubes  (73)
Insulation
Insulation (1369)
Cable Protection Systems

Cable Protection Systems  (1272)

Non-Metallic Conduit Systems  (502) Metallic Conduit Systems  (265) Spiral-Reinforced Conduit Systems  (112) Conduit System Accessories  (211) Protective Tubing and Spiral Binding  (158) Expandable Braided Sleeves  (20) Open Woven Sleeves  (19) Burst Protective Sleeves  (1) Electromagnetic Shielding Sleeves  (1) Edge Protection  (8) Grommets  (1) Wiring Ducts and Accessories  (9)
Cable Protection Systems
Cable Protection Systems (1272)
Electrical Installation

Electrical Installation  (148)

Wire Connectors  (3) Downlight Covers  (8) Cable Rods  (1) Electrical Tapes  (22) Cast Resin Technology  (28) Gel Technology  (16) Chemicals  (3) Industrial Silicones  (67)
Electrical Installation
Electrical Installation (148)
Identification Systems

Identification Systems  (1218)

Wire and Cable Markers  (1114) Control Panel Labelling  (112) Industrial Identification  (82) RFID tags and cable ties  (7) Hazardous Area Identification  (8) Printers and Software  (35)
Identification Systems
Identification Systems (1218)
Application Tooling

Application Tooling  (37)

Automatic Cable Tying System  (11) Application Tooling for Heat Shrinkable Tubing  (5) Application Tooling for Non Shrinkable Tubing  (16) Application Tooling for Braided Sleeves  (3) Application Tooling for Identification  (2)
Application Tooling
Application Tooling (37)
Connectivity

Connectivity  (326)

RapidNet  (3) Fibre  (1) UFC Closures  (37) FDN Closures  (35) FML Closures  (8) FRBU Closures  (23) FST Closures  (5) Connectorised Closures  (6) Enclosures  (35) Cablelok  (86) Splice Trays  (47) Broadband Accessories  (128)
Connectivity
Connectivity (326)
6 043 produkty
Resetovat vše
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 180°, black, 140pcs.
Porovnat
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 180°, black, 140pcs.
RCC180LM10-PA66HIRHSUV/ST/ZN-BK 151-01481
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCC180LM10-PA66HIRHSUV/ST/ZN-BK 151-01481
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 180°, black, 140pcs.
Porovnat
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 180°, black, 140pcs.
RCC180LM12-PA66HIRHSUV/ST/ZN-BK 151-01482
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCC180LM12-PA66HIRHSUV/ST/ZN-BK 151-01482
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 140pcs.
Porovnat
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 140pcs.
RCC180LM6-PA66HIRHSUV/ST/ZN-BK 151-01655
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCC180LM6-PA66HIRHSUV/ST/ZN-BK 151-01655
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 140pcs.
Porovnat
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 140pcs.
RCC180LM8-PA66HIRHSUV/ST/ZN-BK 151-01480
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCC180LM8-PA66HIRHSUV/ST/ZN-BK 151-01480
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 180°, black, 140pcs.
Porovnat
P-clamp medium, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 180°, black, 140pcs.
RCC180MM10-PA66HIRHSUV/ST/ZN-BK 151-01478
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCC180MM10-PA66HIRHSUV/ST/ZN-BK 151-01478
P-clamp medium, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 180°, black, 140pcs.
Porovnat
P-clamp medium, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 180°, black, 140pcs.
RCC180MM12-PA66HIRHSUV/ST/ZN-BK 151-01479
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCC180MM12-PA66HIRHSUV/ST/ZN-BK 151-01479
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 140pcs.
Porovnat
P-clamp medium, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 140pcs.
RCC180MM6-PA66HIRHSUV/ST/ZN-BK 151-01654
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCC180MM6-PA66HIRHSUV/ST/ZN-BK 151-01654
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 140pcs.
Porovnat
P-clamp medium, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 140pcs.
RCC180MM8-PA66HIRHSUV/ST/ZN-BK 151-01477
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCC180MM8-PA66HIRHSUV/ST/ZN-BK 151-01477
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 180°, black, 160pcs.
Porovnat
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 180°, black, 160pcs.
RCC180SM12-PA66HIRHSUV/ST/ZN-BK 151-01476
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCC180SM12-PA66HIRHSUV/ST/ZN-BK 151-01476
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 160pcs.
Porovnat
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 160pcs.
RCC180SM6-PA66HIRHSUV/ST/ZN-BK 151-01653
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCC180SM6-PA66HIRHSUV/ST/ZN-BK 151-01653
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 3pcs.
Porovnat
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 3pcs.
RCC180SM6-PA66HIRHSUV/ST/ZN-BK 151-01672
Porovnat
Přidat do sledovaných položek
3 pcs.
Black (BK) RCC180SM6-PA66HIRHSUV/ST/ZN-BK 151-01672
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 30°, black, 140pcs.
Porovnat
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 30°, black, 140pcs.
RCC30LM10-PA66HIRHSUV/ST/ZN-BK 151-01490
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCC30LM10-PA66HIRHSUV/ST/ZN-BK 151-01490
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 30°, black, 140pcs.
Porovnat
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 30°, black, 140pcs.
RCC30LM12-PA66HIRHSUV/ST/ZN-BK 151-01491
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCC30LM12-PA66HIRHSUV/ST/ZN-BK 151-01491
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 30°, black, 140pcs.
Porovnat
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 30°, black, 140pcs.
RCC30LM6-PA66HIRHSUV/ST/ZN-BK 151-01658
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCC30LM6-PA66HIRHSUV/ST/ZN-BK 151-01658
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 30°, black, 140pcs.
Porovnat
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 30°, black, 140pcs.
RCC30LM8-PA66HIRHSUV/ST/ZN-BK 151-01489
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCC30LM8-PA66HIRHSUV/ST/ZN-BK 151-01489
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 30°, black, 160pcs.
Porovnat
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 30°, black, 160pcs.
RCC30SM10-PA66HIRHSUV/ST/ZN-BK 151-01487
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCC30SM10-PA66HIRHSUV/ST/ZN-BK 151-01487
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 30°, black, 160pcs.
Porovnat
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 30°, black, 160pcs.
RCC30SM12-PA66HIRHSUV/ST/ZN-BK 151-01488
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCC30SM12-PA66HIRHSUV/ST/ZN-BK 151-01488
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 30°, black, 160pcs.
Porovnat
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 30°, black, 160pcs.
RCC30SM6-PA66HIRHSUV/ST/ZN-BK 151-01657
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCC30SM6-PA66HIRHSUV/ST/ZN-BK 151-01657
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 30°, black, 160pcs.
Porovnat
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 30°, black, 160pcs.
RCC30SM8-PA66HIRHSUV/ST/ZN-BK 151-01486
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCC30SM8-PA66HIRHSUV/ST/ZN-BK 151-01486
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 90°, black, 140pcs.
Porovnat
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 90°, black, 140pcs.
RCC90LM10-PA66HIRHSUV/ST/ZN-BK 151-01496
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCC90LM10-PA66HIRHSUV/ST/ZN-BK 151-01496
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 90°, black, 140pcs.
Porovnat
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 90°, black, 140pcs.
RCC90LM12-PA66HIRHSUV/ST/ZN-BK 151-01497
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCC90LM12-PA66HIRHSUV/ST/ZN-BK 151-01497
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 90°, black, 140pcs.
Porovnat
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 90°, black, 140pcs.
RCC90LM6-PA66HIRHSUV/ST/ZN-BK 151-01660
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCC90LM6-PA66HIRHSUV/ST/ZN-BK 151-01660
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 90°, black, 140pcs.
Porovnat
P-clamp long, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 90°, black, 140pcs.
RCC90LM8-PA66HIRHSUV/ST/ZN-BK 151-01495
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCC90LM8-PA66HIRHSUV/ST/ZN-BK 151-01495
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 90°, black, 160pcs.
Porovnat
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 90°, black, 160pcs.
RCC90SM10-PA66HIRHSUV/ST/ZN-BK 151-01493
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCC90SM10-PA66HIRHSUV/ST/ZN-BK 151-01493
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 90°, black, 160pcs.
Porovnat
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 90°, black, 160pcs.
RCC90SM6-PA66HIRHSUV/ST/ZN-BK 151-01659
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCC90SM6-PA66HIRHSUV/ST/ZN-BK 151-01659
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 90°, black, 160pcs.
Porovnat
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀12.95 mm, 90°, black, 160pcs.
RCC90SM12-PA66HIRHSUV/ST/ZN-BK 151-01494
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCC90SM12-PA66HIRHSUV/ST/ZN-BK 151-01494
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 180°, black, 160pcs.
RCD180SM10.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 180°, black, 160pcs.
RCD180SM10-PA66HIRHSUV/ST/ZN-BK 151-01501
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD180SM10-PA66HIRHSUV/ST/ZN-BK 151-01501
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 15°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 15°, black, 160pcs.
RCD15SM10-PA66HIRHSUV/ST/ZN-BK 151-01510
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD15SM10-PA66HIRHSUV/ST/ZN-BK 151-01510
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 15°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 15°, black, 160pcs.
RCD15SM12-PA66HIRHSUV/ST/ZN-BK 151-01511
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD15SM12-PA66HIRHSUV/ST/ZN-BK 151-01511
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 15°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 15°, black, 160pcs.
RCD15SM6-PA66HIRHSUV/ST/ZN-BK 151-01664
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD15SM6-PA66HIRHSUV/ST/ZN-BK 151-01664
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 15°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 15°, black, 160pcs.
RCD15SM8-PA66HIRHSUV/ST/ZN-BK 151-01509
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD15SM8-PA66HIRHSUV/ST/ZN-BK 151-01509
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 180°, black, 140pcs.
Porovnat
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 180°, black, 140pcs.
RCD180LM10-PA66HIRHSUV/ST/ZN-BK 151-01507
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD180LM10-PA66HIRHSUV/ST/ZN-BK 151-01507
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 180°, black, 140pcs.
Porovnat
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 180°, black, 140pcs.
RCD180LM12-PA66HIRHSUV/ST/ZN-BK 151-01508
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD180LM12-PA66HIRHSUV/ST/ZN-BK 151-01508
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 140pcs.
Porovnat
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 140pcs.
RCD180LM6-PA66HIRHSUV/ST/ZN-BK 151-01663
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD180LM6-PA66HIRHSUV/ST/ZN-BK 151-01663
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 140pcs.
Porovnat
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 140pcs.
RCD180LM8-PA66HIRHSUV/ST/ZN-BK 151-01506
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD180LM8-PA66HIRHSUV/ST/ZN-BK 151-01506
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 180°, black, 140pcs.
RCD180MM10.
Porovnat
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 180°, black, 140pcs.
RCD180MM10-PA66HIRHSUV/ST/ZN-BK 151-01504
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD180MM10-PA66HIRHSUV/ST/ZN-BK 151-01504
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 180°, black, 140pcs.
Porovnat
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 180°, black, 140pcs.
RCD180MM12-PA66HIRHSUV/ST/ZN-BK 151-01505
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD180MM12-PA66HIRHSUV/ST/ZN-BK 151-01505
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 140pcs.
Porovnat
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 140pcs.
RCD180MM6-PA66HIRHSUV/ST/ZN-BK 151-01662
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD180MM6-PA66HIRHSUV/ST/ZN-BK 151-01662
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 140pcs.
Porovnat
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 140pcs.
RCD180MM8-PA66HIRHSUV/ST/ZN-BK 151-01503
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD180MM8-PA66HIRHSUV/ST/ZN-BK 151-01503
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 180°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 180°, black, 160pcs.
RCD180SM12-PA66HIRHSUV/ST/ZN-BK 151-01502
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD180SM12-PA66HIRHSUV/ST/ZN-BK 151-01502
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 160pcs.
RCD180SM6-PA66HIRHSUV/ST/ZN-BK 151-01661
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD180SM6-PA66HIRHSUV/ST/ZN-BK 151-01661
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 3pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 3pcs.
RCD180SM6-PA66HIRHSUV/ST/ZN-BK 151-01673
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
3 pcs.
Black (BK) RCD180SM6-PA66HIRHSUV/ST/ZN-BK 151-01673
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 30°, black, 140pcs.
Porovnat
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 30°, black, 140pcs.
RCD30LM10-PA66HIRHSUV/ST/ZN-BK 151-01516
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD30LM10-PA66HIRHSUV/ST/ZN-BK 151-01516
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 30°, black, 140pcs.
Porovnat
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 30°, black, 140pcs.
RCD30LM12-PA66HIRHSUV/ST/ZN-BK 151-01517
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD30LM12-PA66HIRHSUV/ST/ZN-BK 151-01517
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 30°, black, 140pcs.
Porovnat
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 30°, black, 140pcs.
RCD30LM6-PA66HIRHSUV/ST/ZN-BK 151-01666
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD30LM6-PA66HIRHSUV/ST/ZN-BK 151-01666
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 30°, black, 140pcs.
Porovnat
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 30°, black, 140pcs.
RCD30LM8-PA66HIRHSUV/ST/ZN-BK 151-01515
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD30LM8-PA66HIRHSUV/ST/ZN-BK 151-01515
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 30°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 30°, black, 160pcs.
RCD30SM10-PA66HIRHSUV/ST/ZN-BK 151-01513
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD30SM10-PA66HIRHSUV/ST/ZN-BK 151-01513
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 30°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 30°, black, 160pcs.
RCD30SM12-PA66HIRHSUV/ST/ZN-BK 151-01514
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD30SM12-PA66HIRHSUV/ST/ZN-BK 151-01514
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 30°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 30°, black, 160pcs.
RCD30SM6-PA66HIRHSUV/ST/ZN-BK 151-01665
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD30SM6-PA66HIRHSUV/ST/ZN-BK 151-01665
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 30°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 30°, black, 160pcs.
RCD30SM8-PA66HIRHSUV/ST/ZN-BK 151-01512
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD30SM8-PA66HIRHSUV/ST/ZN-BK 151-01512
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 90°, black, 140pcs.
Porovnat
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 90°, black, 140pcs.
RCD90LM10-PA66HIRHSUV/ST/ZN-BK 151-01522
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD90LM10-PA66HIRHSUV/ST/ZN-BK 151-01522
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 90°, black, 140pcs.
Porovnat
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 90°, black, 140pcs.
RCD90LM12-PA66HIRHSUV/ST/ZN-BK 151-01523
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD90LM12-PA66HIRHSUV/ST/ZN-BK 151-01523
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 90°, black, 140pcs.
Porovnat
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 90°, black, 140pcs.
RCD90LM6-PA66HIRHSUV/ST/ZN-BK 151-01628
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD90LM6-PA66HIRHSUV/ST/ZN-BK 151-01628
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 90°, black, 140pcs.
Porovnat
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 90°, black, 140pcs.
RCD90LM8-PA66HIRHSUV/ST/ZN-BK 151-01521
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD90LM8-PA66HIRHSUV/ST/ZN-BK 151-01521
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 90°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 90°, black, 160pcs.
RCD90SM10-PA66HIRHSUV/ST/ZN-BK 151-01519
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD90SM10-PA66HIRHSUV/ST/ZN-BK 151-01519
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 90°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀12.95 mm, 90°, black, 160pcs.
RCD90SM12-PA66HIRHSUV/ST/ZN-BK 151-01520
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD90SM12-PA66HIRHSUV/ST/ZN-BK 151-01520
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 90°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 90°, black, 160pcs.
RCD90SM6-PA66HIRHSUV/ST/ZN-BK 151-01667
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD90SM6-PA66HIRHSUV/ST/ZN-BK 151-01667
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 90°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 90°, black, 160pcs.
RCD90SM8-PA66HIRHSUV/ST/ZN-BK 151-01518
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD90SM8-PA66HIRHSUV/ST/ZN-BK 151-01518
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for hole (round), inside serrated, ⌀20.0mm, black, 100pcs.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀20.0mm, black, 100pcs.
T18RFT3-PA66HSUV-BK 156-00338
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T18RFT3-PA66HSUV-BK 156-00338
Fixing tie for hole (round), inside serrated, ⌀4.0-45.0mm, black, 1000pcs.
Pre-assembled 2-piece mounting tie for round holes consisting of a T50R cable tie and FT7 foot part.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀4.0-45.0mm, black, 1000pcs.
T50RFT7-PA66HS-BK 156-05311
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) T50RFT7-PA66HS-BK 156-05311
Fixing tie for hole (round), inside serrated, ⌀4.0-45.0mm, black, 100pcs.
Pre-assembled 2-piece mounting tie for round holes consisting of a T50R cable tie and FT7 foot part.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀4.0-45.0mm, black, 100pcs.
T50RFT7-PA66HS-BK 156-02264
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T50RFT7-PA66HS-BK 156-02264
Fixing tie for hole (oval), inside serrated, ⌀73mm, black, 500pcs.
Two piece fixing tie T50ROSFTOVAL-B with fir tree for oval holes.
Porovnat
Fixing tie for hole (oval), inside serrated, ⌀73mm, black, 500pcs.
LK2AFT62x122A-PA66HIRHS-BK 156-01208
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) LK2AFT62x122A-PA66HIRHS-BK 156-01208
FML B length tubed closure with with 24 SMF SE-B moulded splice trays
FML B-Length Closure
Porovnat
FML B length tubed closure with with 24 SMF SE-B moulded splice trays
FMLTB-BXXCJ4X 857-00677
Porovnat
Přidat do sledovaných položek
1
Black (BK) FMLTB-BXXCJ4X 857-00677
FML B length tubed closure with 12 Hellapon medium trays
FML B-Length Closure
Porovnat
FML B length tubed closure with 12 Hellapon medium trays
FMLTB-BXBCBCX 857-00678
Porovnat
Přidat do sledovaných položek
1
Black (BK) FMLTB-BXBCBCX 857-00678
FML C length tubed closure with 36 NZDF SE-B trays fitted with 2 x 3A splice bridges
FML C-Length Closure
Porovnat
FML C length tubed closure with 36 NZDF SE-B trays fitted with 2 x 3A splice bridges
FMLTB-CXXCE61 857-00682
Porovnat
Přidat do sledovaných položek
1
Black (BK) FMLTB-CXXCE61 857-00682
Fitting for corrugated tubing, nom⌀11mm, PG7, black, 10pcs.
HelaGuard HG-S Straight, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀11mm, PG7, black, 10pcs.
HG11-S-PG7-PA66-BK 166-21032
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG11-S-PG7-PA66-BK 166-21032
Fitting for corrugated tubing, nom⌀18mm, M20, black, 10pcs.
HelaGuard HG-S Straight, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀18mm, M20, black, 10pcs.
HG18-S-M20-PA66-BK 166-21024
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG18-S-M20-PA66-BK 166-21024
Fitting for corrugated tubing, nom⌀34mm, black, 10pcs.
HelaGuard HG-SFL Straight Swivel Flange, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀34mm, black, 10pcs.
HG34-SFL-PA66-BK 166-21203
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG34-SFL-PA66-BK 166-21203
Fitting for corrugated tubing, nom⌀42mm, black, 2pcs.
HelaGuard HG-SFL Straight Swivel Flange, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀42mm, black, 2pcs.
HG42-SFL-PA66-BK 166-21204
Porovnat
Přidat do sledovaných položek
2 pcs.
Black (BK) HG42-SFL-PA66-BK 166-21204
Fitting for corrugated tubing, nom⌀16mm, PG9, black, 10pcs.
HelaGuard HG-SM Straight Swivel External Thread, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀16mm, PG9, black, 10pcs.
HG16-SM-PG9-PA66/NPB-BK 166-21310
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG16-SM-PG9-PA66/NPB-BK 166-21310
Fitting for corrugated tubing, nom⌀16mm, PG16, black, 10pcs.
HelaGuard HG-SF Straight Swivel Internal Thread, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀16mm, PG16, black, 10pcs.
HG16-SF-PG16-PA66/NPB-BK 166-21410
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG16-SF-PG16-PA66/NPB-BK 166-21410
Fitting for corrugated tubing, nom⌀67mm, M63, black, 1pc.
HelaGuard HGL-S Straight with conduit seal, IP68.
Porovnat
Fitting for corrugated tubing, nom⌀67mm, M63, black, 1pc.
HGL67-S-M63-PA66/TPE-BK 166-21654
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) HGL67-S-M63-PA66/TPE-BK 166-21654
Fitting for corrugated tubing, nom⌀21mm, black, 10pcs.
HelaGuard HGL-SFL Straight Swivel Flange with conduit seal, IP68.
Porovnat
Fitting for corrugated tubing, nom⌀21mm, black, 10pcs.
HGL21-SFL-PA66/TPE-BK 166-21801
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HGL21-SFL-PA66/TPE-BK 166-21801
Fitting for corrugated tubing, nom⌀34mm, black, 10pcs.
HelaGuard HGL-SFL Straight Swivel Flange with conduit seal, IP68.
Porovnat
Fitting for corrugated tubing, nom⌀34mm, black, 10pcs.
HGL34-SFL-PA66/TPE-BK 166-21803
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HGL34-SFL-PA66/TPE-BK 166-21803
Fitting for corrugated tubing, nom⌀21mm, 90°, black, 10pcs.
HelaGuard HG-90FL 90° Elbow Swivel Flange, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀21mm, 90°, black, 10pcs.
HG21-90FL-PA66-BK 166-22401
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG21-90FL-PA66-BK 166-22401
Fitting for corrugated tubing, nom⌀28mm, 90°, black, 10pcs.
HelaGuard HG-90FL 90° Elbow Swivel Flange, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀28mm, 90°, black, 10pcs.
HG28-90FL-PA66-BK 166-22402
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG28-90FL-PA66-BK 166-22402
Fitting for corrugated tubing, nom⌀42mm, 90°, black, 2pcs.
HelaGuard HG-90FL 90° Elbow Swivel Flange, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀42mm, 90°, black, 2pcs.
HG42-90FL-PA66-BK 166-22404
Porovnat
Přidat do sledovaných položek
2 pcs.
Black (BK) HG42-90FL-PA66-BK 166-22404
Fitting for corrugated tubing, nom⌀16mm, M16, 90°, black, 10pcs.
HelaGuard HG-90F 90° Elbow Swivel Internal Thread, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀16mm, M16, 90°, black, 10pcs.
HG16-90F-M16-PA66/NPB-BK 166-22601
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG16-90F-M16-PA66/NPB-BK 166-22601
Fitting for corrugated tubing, nom⌀54mm, M50, 90°, black, 2pcs.
HelaGuard HG-90F 90° Elbow Swivel Internal Thread, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀54mm, M50, 90°, black, 2pcs.
HG54-90F-M50-PA66/NPB-BK 166-22607
Porovnat
Přidat do sledovaných položek
2 pcs.
Black (BK) HG54-90F-M50-PA66/NPB-BK 166-22607
Fitting for corrugated tubing, nom⌀16mm, 45°, black, 10pcs.
HelaGuard HG-45FL 45° Elbow Swivel Flange, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀16mm, 45°, black, 10pcs.
HG16-45FL-PA66-BK 166-23600
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG16-45FL-PA66-BK 166-23600
Fitting for corrugated tubing, nom⌀21mm, 45°, black, 10pcs.
HelaGuard HG-45FL 45° Elbow Swivel Flange, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀21mm, 45°, black, 10pcs.
HG21-45FL-PA66-BK 166-23601
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG21-45FL-PA66-BK 166-23601
Fitting for corrugated tubing, nom⌀34mm, 45°, black, 10pcs.
HelaGuard HG-45FL 45° Elbow Swivel Flange, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀34mm, 45°, black, 10pcs.
HG34-45FL-PA66-BK 166-23603
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG34-45FL-PA66-BK 166-23603
Fitting for corrugated tubing, nom⌀42mm, 45°, black, 2pcs.
HelaGuard HG-45FL 45° Elbow Swivel Flange, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀42mm, 45°, black, 2pcs.
HG42-45FL-PA66-BK 166-23604
Porovnat
Přidat do sledovaných položek
2 pcs.
Black (BK) HG42-45FL-PA66-BK 166-23604
Fitting for corrugated tubing, nom⌀42mm, M50, 45°, black, 2pcs.
HelaGuard HG-45F 45° Elbow Swivel Internal Thread, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀42mm, M50, 45°, black, 2pcs.
HG42-45F-M50-PA66/NPB-BK 166-23804
Porovnat
Přidat do sledovaných položek
2 pcs.
Black (BK) HG42-45F-M50-PA66/NPB-BK 166-23804
Fitting for corrugated tubing, nom⌀13mm, black, 10pcs.
HG-R Reducer.
Porovnat
Fitting for corrugated tubing, nom⌀13mm, black, 10pcs.
HG13-R16-PA66-BK 166-25000
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG13-R16-PA66-BK 166-25000
Fitting for corrugated tubing, nom⌀13mm, black, 10pcs.
HG-R Reducer.
Porovnat
Fitting for corrugated tubing, nom⌀13mm, black, 10pcs.
HG13-R21-PA66-BK 166-25001
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG13-R21-PA66-BK 166-25001
Fitting for corrugated tubing, nom⌀16mm, black, 5pcs.
HG-R Reducer.
Porovnat
Fitting for corrugated tubing, nom⌀16mm, black, 5pcs.
HG16-R21-PA66-BK 166-25002
Porovnat
Přidat do sledovaných položek
5 pcs.
Black (BK) HG16-R21-PA66-BK 166-25002
Fitting for corrugated tubing, nom⌀25mm, black, 5pcs.
HG-R Reducer.
Porovnat
Fitting for corrugated tubing, nom⌀25mm, black, 5pcs.
HG25-R28-PA66-BK 166-25003
Porovnat
Přidat do sledovaných položek
5 pcs.
Black (BK) HG25-R28-PA66-BK 166-25003
Fitting for corrugated tubing, nom⌀21mm, black, 5pcs.
HG-R Reducer.
Porovnat
Fitting for corrugated tubing, nom⌀21mm, black, 5pcs.
HG21-R28-PA66-BK 166-25004
Porovnat
Přidat do sledovaných položek
5 pcs.
Black (BK) HG21-R28-PA66-BK 166-25004
Fitting for corrugated tubing, nom⌀16mm, black, 5pcs.
HG-R Reducer.
Porovnat
Fitting for corrugated tubing, nom⌀16mm, black, 5pcs.
HG16-R34-PA66-BK 166-25005
Porovnat
Přidat do sledovaných položek
5 pcs.
Black (BK) HG16-R34-PA66-BK 166-25005
Fitting for corrugated tubing, nom⌀28mm, black, 5pcs.
HG-R Reducer.
Porovnat
Fitting for corrugated tubing, nom⌀28mm, black, 5pcs.
HG28-R34-PA66-BK 166-25006
Porovnat
Přidat do sledovaných položek
5 pcs.
Black (BK) HG28-R34-PA66-BK 166-25006
Fitting for corrugated tubing, nom⌀21mm, black, 5pcs.
HG-R Reducer.
Porovnat
Fitting for corrugated tubing, nom⌀21mm, black, 5pcs.
HG21-R34-PA66-BK 166-25007
Porovnat
Přidat do sledovaných položek
5 pcs.
Black (BK) HG21-R34-PA66-BK 166-25007
Fitting for corrugated tubing, nom⌀34mm, black, 3pcs.
HG-R Reducer.
Porovnat
Fitting for corrugated tubing, nom⌀34mm, black, 3pcs.
HG34-R42-PA66-BK 166-25008
Porovnat
Přidat do sledovaných položek
3 pcs.
Black (BK) HG34-R42-PA66-BK 166-25008
Fitting for corrugated tubing, nom⌀28mm, black, 3pcs.
HG-R Reducer.
Porovnat
Fitting for corrugated tubing, nom⌀28mm, black, 3pcs.
HG28-R42-PA66-BK 166-25009
Porovnat
Přidat do sledovaných položek
3 pcs.
Black (BK) HG28-R42-PA66-BK 166-25009
Fitting for corrugated tubing, nom⌀21mm, black, 3pcs.
HG-R Reducer.
Porovnat
Fitting for corrugated tubing, nom⌀21mm, black, 3pcs.
HG21-R42-PA66-BK 166-25010
Porovnat
Přidat do sledovaných položek
3 pcs.
Black (BK) HG21-R42-PA66-BK 166-25010
Fitting for corrugated tubing, nom⌀13mm, black, 10pcs.
HGL-R Reducer with conduit seal, IP68.
Porovnat
Fitting for corrugated tubing, nom⌀13mm, black, 10pcs.
HGL13-R16-PA66/TPE-BK 166-25100
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HGL13-R16-PA66/TPE-BK 166-25100
Fitting for corrugated tubing, nom⌀16mm, black, 5pcs.
HGL-R Reducer with conduit seal, IP68.
Porovnat
Fitting for corrugated tubing, nom⌀16mm, black, 5pcs.
HGL16-R21-PA66/TPE-BK 166-25101
Porovnat
Přidat do sledovaných položek
5 pcs.
Black (BK) HGL16-R21-PA66/TPE-BK 166-25101
Fitting for corrugated tubing, nom⌀21mm, black, 5pcs.
HGL-R Reducer with conduit seal, IP68.
Porovnat
Fitting for corrugated tubing, nom⌀21mm, black, 5pcs.
HGL21-R28-PA66/TPE-BK 166-25102
Porovnat
Přidat do sledovaných položek
5 pcs.
Black (BK) HGL21-R28-PA66/TPE-BK 166-25102
Fitting for corrugated tubing, nom⌀16mm, black, 5pcs.
HGL-R Reducer with conduit seal, IP68.
Porovnat
Fitting for corrugated tubing, nom⌀16mm, black, 5pcs.
HGL16-R28-PA66/TPE-BK 166-25103
Porovnat
Přidat do sledovaných položek
5 pcs.
Black (BK) HGL16-R28-PA66/TPE-BK 166-25103
Fitting for corrugated tubing, nom⌀28mm, black, 5pcs.
HGL-R Reducer with conduit seal, IP68.
Porovnat
Fitting for corrugated tubing, nom⌀28mm, black, 5pcs.
HGL28-R34-PA66/TPE-BK 166-25104
Porovnat
Přidat do sledovaných položek
5 pcs.
Black (BK) HGL28-R34-PA66/TPE-BK 166-25104
Facebook  Instagram  Twitter  YouTube  LinkedIn  Corporate Blog 
Kontakt VOP Impressum Mapa stránek Newsletter Pokyny a závazky Zásady ochrany osobních údajů
Aktualizace: 24/08/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.285) | Aktualizace: 24/08/2025 | Nastavení ochrany osobních údajů
Hledat prodejce Kontakt