Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
22/12/2025

Výsledky pro "igh temperature heat shrink tubing"

Nalezeno 5 719 výrobků 1 další položka
Poznámka:  Kombinace hledaných výrazů nevrátila žádné odpovídající výsledky.  Níže jsou výsledky, které odpovídají dílům dle Vašeho vyhledávání.

Typ: Zkuste změnit nebo odstranit výrazy, abyste zlepšili relevanci výsledků vyhledávání.

K dispozici jsou výsledky v následujících kategoriích:
Cable Ties and Fixings

Cable Ties and Fixings  (1693)

Cable Ties Inside Serrated  (159) Cable Ties Outside Serrated  (57) Cable Ties Without Serration  (34) Cable Ties, Releasable  (29) Cable Ties, Stainless Steel  (81) Cable Ties With Fixing Elements  (627) Cable Tie Mounts  (73) Fixing Elements  (233) Clips, Clamps and Plugs  (652)
Cable Ties and Fixings
Cable Ties and Fixings (1693)
Insulation

Insulation  (1369)

Heat Shrink Tubing  (962) Heat Shrinkable Moulded Shapes  (343) Insulating tubes  (73)
Insulation
Insulation (1369)
Cable Protection Systems

Cable Protection Systems  (1272)

Non-Metallic Conduit Systems  (502) Metallic Conduit Systems  (265) Spiral-Reinforced Conduit Systems  (112) Conduit System Accessories  (211) Protective Tubing and Spiral Binding  (158) Expandable Braided Sleeves  (20) Open Woven Sleeves  (19) Burst Protective Sleeves  (1) Electromagnetic Shielding Sleeves  (1) Edge Protection  (8) Grommets  (1) Wiring Ducts and Accessories  (9)
Cable Protection Systems
Cable Protection Systems (1272)
Electrical Installation

Electrical Installation  (148)

Wire Connectors  (3) Downlight Covers  (8) Cable Rods  (1) Electrical Tapes  (22) Cast Resin Technology  (28) Gel Technology  (16) Chemicals  (3) Industrial Silicones  (67)
Electrical Installation
Electrical Installation (148)
Identification Systems

Identification Systems  (1218)

Wire and Cable Markers  (1114) Control Panel Labelling  (112) Industrial Identification  (82) RFID tags and cable ties  (7) Hazardous Area Identification  (8) Printers and Software  (35)
Identification Systems
Identification Systems (1218)
Application Tooling

Application Tooling  (37)

Automatic Cable Tying System  (11) Application Tooling for Heat Shrinkable Tubing  (5) Application Tooling for Non Shrinkable Tubing  (16) Application Tooling for Braided Sleeves  (3) Application Tooling for Identification  (2)
Application Tooling
Application Tooling (37)
5 719 produkty
Resetovat vše
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, natural, 1000pcs.
H3P-PA66-NA 211-60039
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) H3P-PA66-NA 211-60039
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, natural, 1000pcs.
H4P-PA66-NA 211-60049
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) H4P-PA66-NA 211-60049
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Stainless steel cable tie, ball bearing lock, 362.0x4.6mm, ⌀17.0-102.0mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Porovnat
Stainless steel cable tie, ball bearing lock, 362.0x4.6mm, ⌀17.0-102.0mm, metal, 100pcs.
MBT14SS-SS304-ML 111-93148
Porovnat
Přidat do sledovaných položek
100 pcs.
Metal (ML) MBT14SS-SS304-ML 111-93148
Stainless steel cable tie, ball bearing lock, 201.0x4.6mm, ⌀17.0-50.0mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Porovnat
Stainless steel cable tie, ball bearing lock, 201.0x4.6mm, ⌀17.0-50.0mm, metal, 100pcs.
MBT8SS-SS304-ML 111-93088
Porovnat
Přidat do sledovaných položek
100 pcs.
Metal (ML) MBT8SS-SS304-ML 111-93088
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 100pcs.
Cable tie with edge clip.
Porovnat
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 100pcs.
T50ROSEC4A-PA66W-BK 156-00948
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T50ROSEC4A-PA66W-BK 156-00948
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
2-piece fixing tie with EdgeClip for top cable routing.
Porovnat
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSEC4B-PA66W-BK 156-01154
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROSEC4B-PA66W-BK 156-01154
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
Porovnat
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
T50ROSEC23-PA66W-BK 156-00843
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROSEC23-PA66W-BK 156-00843
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.6 mm, 180°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.6 mm, 180°, black, 280pcs.
RCB180SM6SS-PA666V0/SS304-BK 151-02736
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCB180SM6SS-PA666V0/SS304-BK 151-02736
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.4 mm, 90°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.4 mm, 90°, black, 280pcs.
RCB90SM10SS-PA666V0/SS304-BK 151-03006
Porovnat
Přidat do sledovaných položek
280
Black (BK) RCB90SM10SS-PA666V0/SS304-BK 151-03006
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.4 mm, 180°, black, 160pcs.
Porovnat
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.4 mm, 180°, black, 160pcs.
RCC180SM8SS-PA666V0/SS304-BK 151-02737
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCC180SM8SS-PA666V0/SS304-BK 151-02737
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 140pcs.
Porovnat
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 140pcs.
RCD180LM8SS-PA666V0/SS304-BK 151-02735
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD180LM8SS-PA666V0/SS304-BK 151-02735
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 140pcs.
Porovnat
P-clamp medium, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 140pcs.
RCD180MM8SS-PA666V0/SS304-BK 151-03111
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
140 pcs.
Black (BK) RCD180MM8SS-PA666V0/SS304-BK 151-03111
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.4 mm, 180°, black, 160pcs.
RCD180SM10.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.4 mm, 180°, black, 160pcs.
RCD180SM10SS-PA666V0/SS304-BK 151-03008
Porovnat
Přidat do sledovaných položek
160
Black (BK) RCD180SM10SS-PA666V0/SS304-BK 151-03008
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 180°, black, 160pcs.
RCD180SM8SS-PA666V0/SS304-BK 151-02734
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
160 pcs.
Black (BK) RCD180SM8SS-PA666V0/SS304-BK 151-02734
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 90°, black, 140pcs.
Porovnat
P-clamp long, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 90°, black, 140pcs.
RCD90LM8SS-PA666V0/SS304-BK 151-03144
Porovnat
Přidat do sledovaných položek
140
Black (BK) RCD90LM8SS-PA666V0/SS304-BK 151-03144
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 90°, black, 160pcs.
Porovnat
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.4 mm, 90°, black, 160pcs.
RCD90SM8SS-PA666V0/SS304-BK 151-03011
Porovnat
Přidat do sledovaných položek
160
Black (BK) RCD90SM8SS-PA666V0/SS304-BK 151-03011
Connector clip for hole (oval), EWCAP-005-11, black, 1000pcs.
Connector clip designed to meet USCAR EWCAP -005-11 clip slot specifications.
Porovnat
Connector clip for hole (oval), EWCAP-005-11, black, 1000pcs.
CCOVAL6-PA66HIRHSUV-BK 151-01033
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) CCOVAL6-PA66HIRHSUV-BK 151-01033
Fixing tie for hole (oval), outside serrated, ⌀1.5-35.0mm, black, 1500pcs.
This 1-piece fixing tie with fir tree design for oval holes features anti-twist protection.
Porovnat
Fixing tie for hole (oval), outside serrated, ⌀1.5-35.0mm, black, 1500pcs.
T50SOS3DOP65X130-E-PA66HS-BK 157-00016
Porovnat
Přidat do sledovaných položek
1500 pcs.
Black (BK) T50SOS3DOP65X130-E-PA66HS-BK 157-00016
Fixing tie for hole (round)/for hole (hex), outside serrated, ⌀1.5-35.0mm, natural, 500pcs.
1-piece fixing ties with arrowhead, with disc, for round holes, sealed.
Porovnat
Fixing tie for hole (round)/for hole (hex), outside serrated, ⌀1.5-35.0mm, natural, 500pcs.
T50SOSSFT6.5E-MS-MD-PA66HS-NA 126-00065
Porovnat
Přidat do sledovaných položek
500 pcs.
Natural (NA) T50SOSSFT6.5E-MS-MD-PA66HS-NA 126-00065
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
Porovnat
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-35.0mm, black, 500pcs.
T50SVCOC15-18-PA66HS/PA66HIRHS-BK 156-00135
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SVCOC15-18-PA66HS/PA66HIRHS-BK 156-00135
Fixing tie for stud, outside serrated, ⌀1.5-45.0mm, black, 500pcs.
Cable ties with various weld stud fixing methods.
Porovnat
Fixing tie for stud, outside serrated, ⌀1.5-45.0mm, black, 500pcs.
T50ROSSB5-PA66HS/POM-BK 150-10149
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROSSB5-PA66HS/POM-BK 150-10149
Fixing tie for hole (round), inside serrated, ⌀1.5-35.0mm, black, 500pcs.
Disc feature prevents rattling in high-vibration applications and protects against debris ingress.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀1.5-35.0mm, black, 500pcs.
T30RFT4-PA66HIRHSUV/PA66HS-BK 156-00953
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T30RFT4-PA66HIRHSUV/PA66HS-BK 156-00953
Fixing tie for hole (round), inside serrated, ⌀4.0-22.0mm, black, 500pcs.
2-piece fixing tie with fir tree for fixing hole 4.5-5.0 mm.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀4.0-22.0mm, black, 500pcs.
T18RFT5-PA66HS/PA66HIRHS-BK 156-01225
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T18RFT5-PA66HS/PA66HIRHS-BK 156-01225
Fixing tie for hole (round), inside serrated, ⌀5.0-30.0mm, black, 200pcs.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀5.0-30.0mm, black, 200pcs.
T30RFT6LG-PA66/PA66HIRHS-BK 156-00710
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) T30RFT6LG-PA66/PA66HIRHS-BK 156-00710
Fixing tie for hole (round), inside serrated, ⌀4.0-45.0mm, black, 100pcs.
These fir tree fixings can also be used in threaded, blind holes.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀4.0-45.0mm, black, 100pcs.
T50RFT6-PA66HS/PA66-BK 156-00705
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T50RFT6-PA66HS/PA66-BK 156-00705
Fixing tie for hole (round), inside serrated, ⌀5.0-45.0mm, black, 100pcs.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀5.0-45.0mm, black, 100pcs.
T50RFT6LG-PA66/PA66HIRHS-BK 156-00711
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T50RFT6LG-PA66/PA66HIRHS-BK 156-00711
Fixing tie for hole (round), inside serrated, ⌀1.0-45.0mm, black, 500pcs.
These fir tree fixings can also be used in threaded, blind holes.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀1.0-45.0mm, black, 500pcs.
T50RFT6LGSD-HEX-PA66HS/PA66HIRHS-BK 156-01705
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50RFT6LGSD-HEX-PA66HS/PA66HIRHS-BK 156-01705
Fixing tie for hole (round), inside serrated, ⌀1.0-45.0mm, black, 1000pcs.
Staggered fir tree branch design provides low insertion forces and high extraction forces.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀1.0-45.0mm, black, 1000pcs.
T50RFT8GSD-PA66HS/PA66HIRHS-BK 133-00034
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) T50RFT8GSD-PA66HS/PA66HIRHS-BK 133-00034
Fixing tie for hole (round), outside serrated, ⌀8.0-35.0mm, black, 500pcs.
Rounded cable tie head for gapless bundling combined with a foot part for round holes
Porovnat
Fixing tie for hole (round), outside serrated, ⌀8.0-35.0mm, black, 500pcs.
V150RFT10-PA66/PA66HS-BK 156-01233
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) V150RFT10-PA66/PA66HS-BK 156-01233
Blind plug, ⌀6.3 - 7.0 mm, T=6.0 - 17.0mm, natural, 5000pcs.
Blind plug with fir tree for a 6.3 - 7.0 mm hole.
Porovnat
Blind plug, ⌀6.3 - 7.0 mm, T=6.0 - 17.0mm, natural, 5000pcs.
BPFT6XXL-PA66HIRHS-NA 151-01160
Porovnat
Přidat do sledovaných položek
5000 pcs.
Natural (NA) BPFT6XXL-PA66HIRHS-NA 151-01160
Cable clip, ⌀6.0 mm
With Fixing Element DUALM6DOCK bundles can be routed in parallel even as post installation.
Porovnat
Cable clip, ⌀6.0 mm
DUALM6DOCK-PA66HS-BK 151-01056
Porovnat
Přidat do sledovaných položek
2000 pcs.
Black (BK) DUALM6DOCK-PA66HS-BK 151-01056
Cable clip with pipe/tube holder
DTCs for easy assembly of rotatable routed tubes and harnesses.
Porovnat
Cable clip with pipe/tube holder
DTC18x5-S-PA66HIRHS-BK 156-01311
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) DTC18x5-S-PA66HIRHS-BK 156-01311
Cable clip with pipe/tube holder
An overview of the DTC18x( ) family.
Porovnat
Cable clip with pipe/tube holder
DTC18x6.5-S-PA66HIRHS-BK 156-01312
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) DTC18x6.5-S-PA66HIRHS-BK 156-01312
Cable clip with pipe/tube holder
An overview of the DTC18x( ) family.
Porovnat
Cable clip with pipe/tube holder
DTC18x9-11-S-PA66HIRHS-BK 156-01313
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) DTC18x9-11-S-PA66HIRHS-BK 156-01313
Cable clip with pipe/tube holder
DTCs for easy assembly of rotatable routed tubes and harnesses.
Porovnat
Cable clip with pipe/tube holder
DTC18x18-20-S-PA66HIRHS-BK 156-01314
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) DTC18x18-20-S-PA66HIRHS-BK 156-01314
Cable clip with pipe/tube holder
An overview of the DTC18x( ) family.
Porovnat
Cable clip with pipe/tube holder
DTC18x28-S-PA66HIRHS-BK 156-01315
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) DTC18x28-S-PA66HIRHS-BK 156-01315
Connector clip for connector/for hole (round), black, 500pcs.
Porovnat
Connector clip for connector/for hole (round), black, 500pcs.
CC1SFT7-MD-PA66HIRHS-BK 151-01336
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) CC1SFT7-MD-PA66HIRHS-BK 151-01336
Connector clip for connector/for hole (round), black, 500pcs.
Porovnat
Connector clip for connector/for hole (round), black, 500pcs.
CC2SFT7-MD-PA66HIRHS-BK 151-01337
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) CC2SFT7-MD-PA66HIRHS-BK 151-01337
Connector clip, black, 500pcs.
Porovnat
Connector clip, black, 500pcs.
CCSBS6-PA66HIRHS-BK 151-01698
Porovnat
Přidat do sledovaných položek
1500 pcs.
Black (BK) CCSBS6-PA66HIRHS-BK 151-01698
Cable clip, T=4.5mm, ⌀7.0 mm, Dmax=20.0mm
Porovnat
Cable clip, T=4.5mm, ⌀7.0 mm, Dmax=20.0mm
HC1220FT7J-PA66HSUV-BK 151-00853
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) HC1220FT7J-PA66HSUV-BK 151-00853
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Bundling clip for hole (round), L=42.0mm, SO=20.0mm, black, 500pcs.
Porovnat
Bundling clip for hole (round), L=42.0mm, SO=20.0mm, black, 500pcs.
COW20SFT7-PA66HS-BK 151-01570
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) COW20SFT7-PA66HS-BK 151-01570
Bundling clip for screw fixation, L=60.0mm, SO=20.0mm, black, 500pcs.
Bundling Clips for Screws BC-SCR6
Porovnat
Bundling clip for screw fixation, L=60.0mm, SO=20.0mm, black, 500pcs.
BC-SCR6-PA66HIRHS-BK 156-00390
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) BC-SCR6-PA66HIRHS-BK 156-00390
Mini cable channel, 45°, for hole (round), L=52.0mm, black, 4000pcs.
Angled mini channel provides safe routing of wires around corners or obstructions
Porovnat
Mini cable channel, 45°, for hole (round), L=52.0mm, black, 4000pcs.
45MINICHNL-PPTD20-BK 133-01480
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
4000 pcs.
Black (BK) 45MINICHNL-PPTD20-BK 133-01480
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Mini cable channel, 90°, for hole (round), L=38.50mm, black, 3500pcs.
Angled mini channel provides safe routing of wires around corners or obstructions
Porovnat
Mini cable channel, 90°, for hole (round), L=38.50mm, black, 3500pcs.
90MINICHNL-PPTD20-BK 133-01479
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
3500 pcs.
Black (BK) 90MINICHNL-PPTD20-BK 133-01479
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Samples Helawrap-PP-MIX
Porovnat
Samples Helawrap-PP-MIX
Samples Helawrap-PP-MIX 161-60011
Porovnat
Přidat do sledovaných položek
7 pcs.
Various (MIX) Samples Helawrap-PP-MIX 161-60011
Three-Pronged Plier TPPexpand 3.3
Porovnat
Three-Pronged Plier TPPexpand 3.3
TPPexpand3.3_Prong-MET-SR 621-30003
Porovnat
Přidat do sledovaných položek
1 set
Silver (SR) TPPexpand3.3_Prong-MET-SR 621-30003
Cable marker, to identify: wire and cable/for sliding, laser print "A", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Porovnat
Cable marker, to identify: wire and cable/for sliding, laser print "A", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 A-PVC-YE 515-01014
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
1000 pcs.
Yellow (YE) HGDC1-3 A-PVC-YE 515-01014
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable marker, to identify: wire and cable/for sliding, laser print "0", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Porovnat
Cable marker, to identify: wire and cable/for sliding, laser print "0", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 0-PVC-YE 515-01604
Porovnat
Přidat do sledovaných položek
1000 pcs.
Yellow (YE) HGDC1-3 0-PVC-YE 515-01604
Cable marker, to identify: wire and cable/for sliding, laser print "1", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Porovnat
Cable marker, to identify: wire and cable/for sliding, laser print "1", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 1-PVC-YE 515-01614
Porovnat
Přidat do sledovaných položek
1000 pcs.
Yellow (YE) HGDC1-3 1-PVC-YE 515-01614
Cable marker, to identify: wire and cable/for sliding, laser print "2", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Porovnat
Cable marker, to identify: wire and cable/for sliding, laser print "2", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 2-PVC-YE 515-01624
Porovnat
Přidat do sledovaných položek
1000 pcs.
Yellow (YE) HGDC1-3 2-PVC-YE 515-01624
Cable marker, to identify: wire and cable/for sliding, laser print "3", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Porovnat
Cable marker, to identify: wire and cable/for sliding, laser print "3", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 3-PVC-YE 515-01634
Porovnat
Přidat do sledovaných položek
1000 pcs.
Yellow (YE) HGDC1-3 3-PVC-YE 515-01634
Cable marker, to identify: wire and cable/for sliding, laser print "5", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Porovnat
Cable marker, to identify: wire and cable/for sliding, laser print "5", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 5-PVC-YE 515-01654
Porovnat
Přidat do sledovaných položek
1000 pcs.
Yellow (YE) HGDC1-3 5-PVC-YE 515-01654
Cable marker, to identify: wire and cable/for sliding, laser print "6", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Porovnat
Cable marker, to identify: wire and cable/for sliding, laser print "6", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 6-PVC-YE 515-01664
Porovnat
Přidat do sledovaných položek
1000 pcs.
Yellow (YE) HGDC1-3 6-PVC-YE 515-01664
Cable marker, to identify: wire and cable/for sliding, laser print "7", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Porovnat
Cable marker, to identify: wire and cable/for sliding, laser print "7", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 7-PVC-YE 515-01674
Porovnat
Přidat do sledovaných položek
1000 pcs.
Yellow (YE) HGDC1-3 7-PVC-YE 515-01674
Cable marker, to identify: wire and cable/for sliding, laser print "8", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Porovnat
Cable marker, to identify: wire and cable/for sliding, laser print "8", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 8-PVC-YE 515-01684
Porovnat
Přidat do sledovaných položek
1000 pcs.
Yellow (YE) HGDC1-3 8-PVC-YE 515-01684
Cable marker, to identify: wire and cable/for sliding, laser print "9", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Porovnat
Cable marker, to identify: wire and cable/for sliding, laser print "9", ⌀1.0-3.0mm, yellow, pcs.=1000pcs.
HGDC1-3 9-PVC-YE 515-01694
Porovnat
Přidat do sledovaných položek
1000 pcs.
Yellow (YE) HGDC1-3 9-PVC-YE 515-01694
Cable marker, to identify: wire and cable/for sliding, laser print "J", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Porovnat
Cable marker, to identify: wire and cable/for sliding, laser print "J", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
HGDC2-5 J-PVC-YE 515-02104
Porovnat
Přidat do sledovaných položek
1000 reel
Yellow (YE) HGDC2-5 J-PVC-YE 515-02104
Cable marker, to identify: wire and cable/for sliding, laser print "0", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Porovnat
Cable marker, to identify: wire and cable/for sliding, laser print "0", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
HGDC2-5 0-PVC-YE 515-02604
Porovnat
Přidat do sledovaných položek
1000 pcs.
Yellow (YE) HGDC2-5 0-PVC-YE 515-02604
Cable marker, to identify: wire and cable/for sliding, laser print "1", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Porovnat
Cable marker, to identify: wire and cable/for sliding, laser print "1", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
HGDC2-5 1-PVC-YE 515-02614
Porovnat
Přidat do sledovaných položek
1000 pcs.
Yellow (YE) HGDC2-5 1-PVC-YE 515-02614
Cable marker, to identify: wire and cable/for sliding, laser print "2", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Porovnat
Cable marker, to identify: wire and cable/for sliding, laser print "2", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
HGDC2-5 2-PVC-YE 515-02624
Porovnat
Přidat do sledovaných položek
1000 pcs.
Yellow (YE) HGDC2-5 2-PVC-YE 515-02624
Cable marker, to identify: wire and cable/for sliding, laser print "3", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Porovnat
Cable marker, to identify: wire and cable/for sliding, laser print "3", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
HGDC2-5 3-PVC-YE 515-02634
Porovnat
Přidat do sledovaných položek
1000 pcs.
Yellow (YE) HGDC2-5 3-PVC-YE 515-02634
Cable marker, to identify: wire and cable/for sliding, laser print "4", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Porovnat
Cable marker, to identify: wire and cable/for sliding, laser print "4", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
HGDC2-5 4-PVC-YE 515-02644
Porovnat
Přidat do sledovaných položek
1000 pcs.
Yellow (YE) HGDC2-5 4-PVC-YE 515-02644
Cable marker, to identify: wire and cable/for sliding, laser print "5", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Porovnat
Cable marker, to identify: wire and cable/for sliding, laser print "5", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
HGDC2-5 5-PVC-YE 515-02654
Porovnat
Přidat do sledovaných položek
1000 pcs.
Yellow (YE) HGDC2-5 5-PVC-YE 515-02654
Cable marker, to identify: wire and cable/for sliding, laser print "7", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Porovnat
Cable marker, to identify: wire and cable/for sliding, laser print "7", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
HGDC2-5 7-PVC-YE 515-02674
Porovnat
Přidat do sledovaných položek
1000 pcs.
Yellow (YE) HGDC2-5 7-PVC-YE 515-02674
Cable marker, to identify: wire and cable/for sliding, laser print "8", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Porovnat
Cable marker, to identify: wire and cable/for sliding, laser print "8", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
HGDC2-5 8-PVC-YE 515-02684
Porovnat
Přidat do sledovaných položek
1000 pcs.
Yellow (YE) HGDC2-5 8-PVC-YE 515-02684
Cable marker, to identify: wire and cable/for sliding, laser print "9", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
Perfect for precision marking in confined spaces.
Porovnat
Cable marker, to identify: wire and cable/for sliding, laser print "9", ⌀2.0-5.0mm, yellow, pcs.=1000pcs.
HGDC2-5 9-PVC-YE 515-02694
Porovnat
Přidat do sledovaných položek
1000 pcs.
Yellow (YE) HGDC2-5 9-PVC-YE 515-02694
Cable marker, to identify: wire and cable/for sliding, laser print "1", ⌀4.0-9.0mm, yellow, pcs.=250pcs.
Perfect for precision marking in confined spaces.
Porovnat
Cable marker, to identify: wire and cable/for sliding, laser print "1", ⌀4.0-9.0mm, yellow, pcs.=250pcs.
HGDC4-9 1-PVC-YE 515-03614
Porovnat
Přidat do sledovaných položek
250 pcs.
Yellow (YE) HGDC4-9 1-PVC-YE 515-03614
Cable marker, to identify: wire and cable/for sliding, laser print "2", ⌀4.0-9.0mm, yellow, pcs.=250pcs.
Perfect for precision marking in confined spaces.
Porovnat
Cable marker, to identify: wire and cable/for sliding, laser print "2", ⌀4.0-9.0mm, yellow, pcs.=250pcs.
HGDC4-9 2-PVC-YE 515-03624
Porovnat
Přidat do sledovaných položek
250 pcs.
Yellow (YE) HGDC4-9 2-PVC-YE 515-03624
Cable marker, to identify: wire and cable/for sliding, laser print "3", ⌀4.0-9.0mm, yellow, pcs.=250pcs.
Perfect for precision marking in confined spaces.
Porovnat
Cable marker, to identify: wire and cable/for sliding, laser print "3", ⌀4.0-9.0mm, yellow, pcs.=250pcs.
HGDC4-9 3-PVC-YE 515-03634
Porovnat
Přidat do sledovaných položek
250 pcs.
Yellow (YE) HGDC4-9 3-PVC-YE 515-03634
Cable marker, to identify: wire and cable/for sliding, laser print "4", ⌀4.0-9.0mm, yellow, pcs.=250pcs.
Perfect for precision marking in confined spaces.
Porovnat
Cable marker, to identify: wire and cable/for sliding, laser print "4", ⌀4.0-9.0mm, yellow, pcs.=250pcs.
HGDC4-9 4-PVC-YE 515-03644
Porovnat
Přidat do sledovaných položek
250 pcs.
Yellow (YE) HGDC4-9 4-PVC-YE 515-03644
Cable marker, to identify: wire and cable/for sliding, laser print "5", ⌀4.0-9.0mm, yellow, pcs.=250pcs.
Perfect for precision marking in confined spaces.
Porovnat
Cable marker, to identify: wire and cable/for sliding, laser print "5", ⌀4.0-9.0mm, yellow, pcs.=250pcs.
HGDC4-9 5-PVC-YE 515-03654
Porovnat
Přidat do sledovaných položek
250 pcs.
Yellow (YE) HGDC4-9 5-PVC-YE 515-03654
Cable marker, to identify: wire and cable/for sliding, laser print "6", ⌀4.0-9.0mm, yellow, pcs.=250pcs.
Perfect for precision marking in confined spaces.
Porovnat
Cable marker, to identify: wire and cable/for sliding, laser print "6", ⌀4.0-9.0mm, yellow, pcs.=250pcs.
HGDC4-9 6-PVC-YE 515-03664
Porovnat
Přidat do sledovaných položek
250 pcs.
Yellow (YE) HGDC4-9 6-PVC-YE 515-03664
Cable marker, to identify: wire and cable/for sliding, laser print "7", ⌀4.0-9.0mm, yellow, pcs.=250pcs.
Perfect for precision marking in confined spaces.
Porovnat
Cable marker, to identify: wire and cable/for sliding, laser print "7", ⌀4.0-9.0mm, yellow, pcs.=250pcs.
HGDC4-9 7-PVC-YE 515-03674
Porovnat
Přidat do sledovaných položek
250 pcs.
Yellow (YE) HGDC4-9 7-PVC-YE 515-03674
Cable marker, to identify: wire and cable/for sliding, laser print "8", ⌀4.0-9.0mm, yellow, pcs.=250pcs.
Perfect for precision marking in confined spaces.
Porovnat
Cable marker, to identify: wire and cable/for sliding, laser print "8", ⌀4.0-9.0mm, yellow, pcs.=250pcs.
HGDC4-9 8-PVC-YE 515-03684
Porovnat
Přidat do sledovaných položek
250 pcs.
Yellow (YE) HGDC4-9 8-PVC-YE 515-03684
Cable marker, to identify: wire and cable/for sliding, laser print "9", ⌀4.0-9.0mm, yellow, pcs.=250pcs.
Perfect for precision marking in confined spaces.
Porovnat
Cable marker, to identify: wire and cable/for sliding, laser print "9", ⌀4.0-9.0mm, yellow, pcs.=250pcs.
HGDC4-9 9-PVC-YE 515-03694
Porovnat
Přidat do sledovaných položek
250 pcs.
Yellow (YE) HGDC4-9 9-PVC-YE 515-03694
Cable tie not serrated vibration absorbing, 337.0x8.0mm, ⌀8.0-86.0mm, grey, 50pcs.
Kabelrap tie offers a smooth strap providing secure assembly without damaging cables or hoses.
Porovnat
Cable tie not serrated vibration absorbing, 337.0x8.0mm, ⌀8.0-86.0mm, grey, 50pcs.
KR8/33-PA46-GY 121-83378
Porovnat
Přidat do sledovaných položek
50 pcs.
Grey (GY) KR8/33-PA46-GY 121-83378
Conduit cutter for 8 - 34mm, black, 1pc.
HelaGuard ConCutter.
Porovnat
Conduit cutter for 8 - 34mm, black, 1pc.
CONCUTTER1-PL-BK 166-51101
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) CONCUTTER1-PL-BK 166-51101
Conduit cutter for 8 - 67mm, black, 1pc.
HelaGuard ConCutter.
Porovnat
Conduit cutter for 8 - 67mm, black, 1pc.
CONCUTTER2-PL-BK 166-51102
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) CONCUTTER2-PL-BK 166-51102
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
Fastening ties for 5.0 mm round welding or threaded studs.
Porovnat
Fixing tie for stud, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
T50SOSSBS5E-2-PA66HS-BK 157-00252
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SOSSBS5E-2-PA66HS-BK 157-00252
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-50.0mm, black, 500pcs.
T50SMVCOC10-14
Porovnat
Fixing tie with pipe/tube holder, inside serrated, ⌀2.0-50.0mm, black, 500pcs.
T50SMVCOC10-14-PA66HS/PA66HIRHS-BK 156-00128
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SMVCOC10-14-PA66HS/PA66HIRHS-BK 156-00128
Fixing tie for hole (round), inside serrated, ⌀1.0-30.0mm, black, 500pcs.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀1.0-30.0mm, black, 500pcs.
T50SFT6LG1SD-PA66HS/PA66HIRHS-BK 156-00154
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SFT6LG1SD-PA66HS/PA66HIRHS-BK 156-00154
Fixing tie for hole (oval), outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Two Piece Fixing Tie T50R6DOP with Fir Tree for oval holes.
Porovnat
Fixing tie for hole (oval), outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROS1DOP62x122-PA66HS/PA66HIRHS-BK 156-05908
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROS1DOP62x122-PA66HS/PA66HIRHS-BK 156-05908
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, natural, 1000pcs.
H2P-PA66-NA 211-60029
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) H2P-PA66-NA 211-60029
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable tie with edge clip.
Porovnat
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSEC4A-PA66W-BK 156-00570
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROSEC4A-PA66W-BK 156-00570
Fixing tie for edge, inside serrated, ⌀1.5-47mm, black, 100pcs.
T50REC1-3 EdgeClip for single, double or triple routing in parallel or perpendicular for cables.
Porovnat
Fixing tie for edge, inside serrated, ⌀1.5-47mm, black, 100pcs.
T50REC1-3TRIOSET-PA66W-BK 156-03135
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T50REC1-3TRIOSET-PA66W-BK 156-03135
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Corrugated tube clip, black, 250pcs.
The cable guide standoff stands off bundles from frame rails, providing clearance from bolts and other protrusions for protection against abrasion.
Porovnat
Corrugated tube clip, black, 250pcs.
CGS1-PA66HIRHSUV-BK 151-00006
Porovnat
Přidat do sledovaných položek
250 pcs.
Black (BK) CGS1-PA66HIRHSUV-BK 151-00006
Cable clip for hole (oval), T=0.6 - 5.0mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=12.2mm, Dmax=18.2mm
Fixing element for parallel routing of two harnesses or tubes (12.2 - 18.0mm).
Porovnat
Cable clip for hole (oval), T=0.6 - 5.0mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=12.2mm, Dmax=18.2mm
DHC12.2-18.2FTOVAL-PA66HIRHS-BK 151-02965
Porovnat
Přidat do sledovaných položek
250 pcs.
Black (BK) DHC12.2-18.2FTOVAL-PA66HIRHS-BK 151-02965
Cable clip for cable bundles/for hole (oval), T=0.6 - 5.0mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=12.2mm, Dmax=18.2mm
Fixing element for parallel routing of three harnesses or tubes (12.2 - 18.0mm).
Porovnat
Cable clip for cable bundles/for hole (oval), T=0.6 - 5.0mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=12.2mm, Dmax=18.2mm
THC12.2-18.2FTOVAL-PA66HIRHS-BK 151-02967
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) THC12.2-18.2FTOVAL-PA66HIRHS-BK 151-02967
Connector clip for hole (round), black, 1000pcs.
Porovnat
Connector clip for hole (round), black, 1000pcs.
YCCSFT6.5PT0.8-1.5MD-PA66HIRHS-BK 151-00934
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) YCCSFT6.5PT0.8-1.5MD-PA66HIRHS-BK 151-00934
Connector clip for hole (round), black, 500pcs.
Porovnat
Connector clip for hole (round), black, 500pcs.
CCSFT5-PA66HIRHS-BK 151-00980
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) CCSFT5-PA66HIRHS-BK 151-00980
Connector clip for hole (round), black, 500pcs.
Connector Clip for round holes 5.2 - 5.7 mm or M6.
Porovnat
Connector clip for hole (round), black, 500pcs.
CCFT5-6D16-PA66HIRHS-BK 151-01878
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) CCFT5-6D16-PA66HIRHS-BK 151-01878
Connector clip for connector/for hole (round), black, 500pcs.
Porovnat
Connector clip for connector/for hole (round), black, 500pcs.
CCSFT6.5-MOD-PA66HIRHS-BK 151-01323
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) CCSFT6.5-MOD-PA66HIRHS-BK 151-01323
Connector clip for connector/for hole (round), black, 500pcs.
Porovnat
Connector clip for connector/for hole (round), black, 500pcs.
CC1SFT7PT2.3-3.5-PA66HIRHS-BK 151-01466
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) CC1SFT7PT2.3-3.5-PA66HIRHS-BK 151-01466
Connector clip, black, 500pcs.
Conector clip CCWA for wires.
Porovnat
Connector clip, black, 500pcs.
CCWA3.4-PA66HIRHS-BK 151-01876
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) CCWA3.4-PA66HIRHS-BK 151-01876
Backshell, 180°, nom⌀10mm, black, 1200pcs.
Backshell
Porovnat
Backshell, 180°, nom⌀10mm, black, 1200pcs.
BSB180NW10-PA66HS-BK 151-02324
Porovnat
Přidat do sledovaných položek
1200 pcs.
Black (BK) BSB180NW10-PA66HS-BK 151-02324
Backshell, 180°, nom⌀8.5mm, black, 1200pcs.
Backshell
Porovnat
Backshell, 180°, nom⌀8.5mm, black, 1200pcs.
BSB180NW8.5-PA66HS-BK 151-02328
Porovnat
Přidat do sledovaných položek
1200 pcs.
Black (BK) BSB180NW8.5-PA66HS-BK 151-02328
Backshell, 180°, nom⌀7.5mm, black, 1200pcs.
Backshell
Porovnat
Backshell, 180°, nom⌀7.5mm, black, 1200pcs.
BSB180NW7.5-PA66HS-BK 151-02332
Porovnat
Přidat do sledovaných položek
1200 pcs.
Black (BK) BSB180NW7.5-PA66HS-BK 151-02332
Backshell, 180°, nom⌀13.0mm, black, 1600pcs.
Backshell
Porovnat
Backshell, 180°, nom⌀13.0mm, black, 1600pcs.
BSC180NW13-PA66HS-BK 151-02367
Porovnat
Přidat do sledovaných položek
1600 pcs.
Black (BK) BSC180NW13-PA66HS-BK 151-02367
Backshell, 180°, nom⌀17.0mm, black, 900pcs.
Backshell
Porovnat
Backshell, 180°, nom⌀17.0mm, black, 900pcs.
BSE180NW17-PA66HS-BK 151-02398
Porovnat
Přidat do sledovaných položek
900 pcs.
Black (BK) BSE180NW17-PA66HS-BK 151-02398
Backshell, 180°, nom⌀13.0mm, black, 600pcs.
Backshell (V0)
Porovnat
Backshell, 180°, nom⌀13.0mm, black, 600pcs.
BSD180NW13-PA66HS-BK 151-02445
Porovnat
Přidat do sledovaných položek
600 pcs.
Black (BK) BSD180NW13-PA66HS-BK 151-02445
Facebook  Instagram  Twitter  YouTube  LinkedIn  Corporate Blog 
Kontakt VOP Impressum Mapa stránek Newsletter Pokyny a závazky Zásady ochrany osobních údajů
Aktualizace: 21/12/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.293.4) | Aktualizace: 21/12/2025 | Nastavení ochrany osobních údajů
Hledat prodejce Kontakt