Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
11/11/2025

Výsledky pro "cable"

Nalezeno 7 537 výrobků 112 dalších položek
K dispozici jsou výsledky v následujících kategoriích:
Cable Ties and Fixings

Cable Ties and Fixings  (2738)

Cable Ties Inside Serrated  (461) Cable Ties Outside Serrated  (87) Cable Ties Without Serration  (37) Cable Ties, Releasable  (97) Cable Ties, Stainless Steel  (138) Cable Ties With Fixing Elements  (817) Cable Tie Mounts  (214) Fixing Elements  (319) Clips, Clamps and Plugs  (913)
Cable Ties and Fixings
Cable Ties and Fixings (2738)
Insulation

Insulation  (888)

Heat Shrink Tubing  (488) Heat Shrinkable Moulded Shapes  (331) Insulating tubes  (70)
Insulation
Insulation (888)
Cable Protection Systems

Cable Protection Systems  (1716)

Non-Metallic Conduit Systems  (502) Metallic Conduit Systems  (265) Spiral-Reinforced Conduit Systems  (112) Conduit System Accessories  (212) Protective Tubing and Spiral Binding  (158) Expandable Braided Sleeves  (125) Open Woven Sleeves  (214) Burst Protective Sleeves  (19) Electromagnetic Shielding Sleeves  (23) Edge Protection  (28) Grommets  (63) Wiring Ducts and Accessories  (173)
Cable Protection Systems
Cable Protection Systems (1716)
Electrical Installation

Electrical Installation  (338)

Wire Connectors  (23) Downlight Covers  (3) Cable Rods  (13) Electrical Tapes  (87) Cast Resin Technology  (85) Gel Technology  (31) Cable Entry Systems  (96)
Electrical Installation
Electrical Installation (338)
Identification Systems

Identification Systems  (1779)

Wire and Cable Markers  (1438) Control Panel Labelling  (245) Industrial Identification  (231) RFID tags and cable ties  (56) Security Labeling  (17) Hazardous Area Identification  (63) Printers and Software  (3)
Identification Systems
Identification Systems (1779)
Application Tooling

Application Tooling  (96)

Automatic Cable Tying System  (31) Application Tooling for Cable Ties  (46) Application Tooling for Heat Shrinkable Tubing  (4) Application Tooling for Non Shrinkable Tubing  (10) Application Tooling for Identification  (5)
Application Tooling
Application Tooling (96)
7 537 produkty
Resetovat vše
Heat shrink marker, halogen free/UV resistant, thermal transfer print, continuous, 19.0mm/9.5mm, white, 30m
TLFX- high performance halogen free heat shrink tube.
Porovnat
Heat shrink marker, halogen free/UV resistant, thermal transfer print, continuous, 19.0mm/9.5mm, white, 30m
TLFX190WH-PO-X-WH 554-51600
Porovnat
Přidat do sledovaných položek
1 reel
White (WH) TLFX190WH-PO-X-WH 554-51600
Heat shrink marker, halogen free/UV resistant, thermal transfer print, continuous, 19.0mm/9.5mm, yellow, 30m
TLFX- high performance halogen free heat shrink tube.
Porovnat
Heat shrink marker, halogen free/UV resistant, thermal transfer print, continuous, 19.0mm/9.5mm, yellow, 30m
TLFX190YE-PO-X-YE 554-51601
Porovnat
Přidat do sledovaných položek
1 reel
Yellow (YE) TLFX190YE-PO-X-YE 554-51601
Heat shrink marker, halogen free/UV resistant, thermal transfer print, continuous, 38.1mm/19.0mm, yellow, 13m
TLFX- high performance halogen free heat shrink tube.
Porovnat
Heat shrink marker, halogen free/UV resistant, thermal transfer print, continuous, 38.1mm/19.0mm, yellow, 13m
TLFX381YE-PO-X-YE 554-51801
Porovnat
Přidat do sledovaných položek
1 reel
Yellow (YE) TLFX381YE-PO-X-YE 554-51801
Cable label, self laminating, high temperature resistant/chemical resistance, white/transparent, laser print, 19.05x38.10mm, H2=93.13mm, 500pcs.
Porovnat
Cable label, self laminating, high temperature resistant/chemical resistance, white/transparent, laser print, 19.05x38.10mm, H2=93.13mm, 500pcs.
TAG138LA4-1105-CL/WH 594-13876
Porovnat
Přidat do sledovaných položek
500 pack
White (WH), Transparent (CL) TAG138LA4-1105-CL/WH 594-13876
Cable label, self laminating, high temperature resistant/chemical resistance, white/transparent, laser print, 25.40x38.10mm, H2=139.70mm, 500pcs.
Porovnat
Cable label, self laminating, high temperature resistant/chemical resistance, white/transparent, laser print, 25.40x38.10mm, H2=139.70mm, 500pcs.
TAG139LA4-1105-CL/WH 594-13976
Porovnat
Přidat do sledovaných položek
500 pack
White (WH), Transparent (CL) TAG139LA4-1105-CL/WH 594-13976
Cable label, White/Transparent
Palm sized hand held self-laminating label dispenser RiteOn.
Porovnat
Cable label, White/Transparent
RO201-1401-CL/WH 550-14011
Porovnat
Přidat do sledovaných položek
200 pack
White (WH), Transparent (CL) RO201-1401-CL/WH 550-14011
Cable label, self laminating, Refill pack, self-laminating/chemical resistance, white/transparent, manual marking, 12.70x19.05mm, H2=50.80mm, 150pcs.
Refill packs for RiteOn label dispenser.
Porovnat
Cable label, self laminating, Refill pack, self-laminating/chemical resistance, white/transparent, manual marking, 12.70x19.05mm, H2=50.80mm, 150pcs.
RO202REF-1401-CL/WH 550-11401
Porovnat
Přidat do sledovaných položek
150 pack
White (WH), Transparent (CL) RO202REF-1401-CL/WH 550-11401
Cable label, White/Transparent
Palm sized hand held self-laminating label dispenser RiteOn.
Porovnat
Cable label, White/Transparent
RO203-1401-CL/WH 550-14013
Porovnat
Přidat do sledovaných položek
100 pack
White (WH), Transparent (CL) RO203-1401-CL/WH 550-14013
Wiring duct, wide fingers, halogen-free, 25x25.0mm, L=2m, grey, 48.0m
Smooth, burr-free edges protect installers from injury and wires from damage.
Porovnat
Wiring duct, wide fingers, halogen-free, 25x25.0mm, L=2m, grey, 48.0m
HTWD-HF-25X25-PC/ABS-GY 183-12525
Porovnat
Přidat do sledovaných položek
48.0 m
Grey RAL 7035 (RAL7035) HTWD-HF-25X25-PC/ABS-GY 183-12525
Wiring duct, wide fingers, halogen-free, 25x50.0mm, L=2m, grey, 44m
Porovnat
Wiring duct, wide fingers, halogen-free, 25x50.0mm, L=2m, grey, 44m
HTWD-HF-25X50-PC/ABS-GY 183-12550
Porovnat
Přidat do sledovaných položek
44 m
Grey RAL 7035 (RAL7035) HTWD-HF-25X50-PC/ABS-GY 183-12550
Wiring duct, wide fingers, halogen-free, 37.5x37.5mm, L=2m, grey, 40m
Smooth, burr-free edges protect installers from injury and wires from damage.
Porovnat
Wiring duct, wide fingers, halogen-free, 37.5x37.5mm, L=2m, grey, 40m
HTWD-HF-37.5X37.5-PC/ABS-GY 183-13737
Porovnat
Přidat do sledovaných položek
40 m
Grey RAL 7035 (RAL7035) HTWD-HF-37.5X37.5-PC/ABS-GY 183-13737
Wiring duct, wide fingers, halogen-free, 37.5x50.0mm, L=2m, grey, 32m
Smooth, burr-free edges protect installers from injury and wires from damage.
Porovnat
Wiring duct, wide fingers, halogen-free, 37.5x50.0mm, L=2m, grey, 32m
HTWD-HF-37.5X50-PC/ABS-GY 183-13750
Porovnat
Přidat do sledovaných položek
32 m
Grey RAL 7035 (RAL7035) HTWD-HF-37.5X50-PC/ABS-GY 183-13750
Wiring duct, wide fingers, halogen-free, 50x50.0mm, L=2m, grey, 42m
Smooth, burr-free edges protect installers from injury and wires from damage.
Porovnat
Wiring duct, wide fingers, halogen-free, 50x50.0mm, L=2m, grey, 42m
HTWD-HF-50X50-PC/ABS-GY 183-15050
Porovnat
Přidat do sledovaných položek
42 m
Grey RAL 7035 (RAL7035) HTWD-HF-50X50-PC/ABS-GY 183-15050
Wiring duct, wide fingers, halogen-free, 75x50.0mm, L=2m, grey, 28m
Smooth, burr-free edges protect installers from injury and wires from damage.
Porovnat
Wiring duct, wide fingers, halogen-free, 75x50.0mm, L=2m, grey, 28m
HTWD-HF-75X50-PC/ABS-GY 183-17550
Porovnat
Přidat do sledovaných položek
28 m
Grey RAL 7035 (RAL7035) HTWD-HF-75X50-PC/ABS-GY 183-17550
Wiring duct, wide fingers, halogen-free, 100x50.0mm, L=2m, grey, 20m
Porovnat
Wiring duct, wide fingers, halogen-free, 100x50.0mm, L=2m, grey, 20m
HTWD-HF-100X50-PC/ABS-GY 183-11050
Porovnat
Přidat do sledovaných položek
20 m
Grey RAL 7035 (RAL7035) HTWD-HF-100X50-PC/ABS-GY 183-11050
Wiring duct, wide fingers, halogen-free, 100x75.0mm, L=2m, grey, 16m
Smooth, burr-free edges protect installers from injury and wires from damage.
Porovnat
Wiring duct, wide fingers, halogen-free, 100x75.0mm, L=2m, grey, 16m
HTWD-HF-100X75-PC/ABS-GY 183-11075
Porovnat
Přidat do sledovaných položek
16 m
Grey RAL 7035 (RAL7035) HTWD-HF-100X75-PC/ABS-GY 183-11075
Wiring duct, wide fingers, halogen-free, 25x75.0mm, L=2m, grey, 36m
Smooth, burr-free edges protect installers from injury and wires from damage.
Porovnat
Wiring duct, wide fingers, halogen-free, 25x75.0mm, L=2m, grey, 36m
HTWD-HF-25X75-PC/ABS-GY 183-22575
Porovnat
Přidat do sledovaných položek
36 m
Grey RAL 7035 (RAL7035) HTWD-HF-25X75-PC/ABS-GY 183-22575
Wiring duct, wide fingers, halogen-free, 25x37.5mm, L=2m, grey, 54m
Porovnat
Wiring duct, wide fingers, halogen-free, 25x37.5mm, L=2m, grey, 54m
HTWD-HF-25X37.5-PC/ABS-GY 183-12537
Porovnat
Přidat do sledovaných položek
54 m
Grey RAL 7035 (RAL7035) HTWD-HF-25X37.5-PC/ABS-GY 183-12537
Wiring duct, wide fingers, halogen-free, 125x75.0mm, L=2m, grey, 16m
Smooth, burr-free edges protect installers from injury and wires from damage.
Porovnat
Wiring duct, wide fingers, halogen-free, 125x75.0mm, L=2m, grey, 16m
HTWD-HF-125X75-PC/ABS-GY 183-12257
Porovnat
Přidat do sledovaných položek
16 m
Grey RAL 7035 (RAL7035) HTWD-HF-125X75-PC/ABS-GY 183-12257
Cable clip for adhesive use/with pipe/tube holder, Dmax=6.0mm
RA6 self-adhesive clip for a quick and easy installation.
Porovnat
Cable clip for adhesive use/with pipe/tube holder, Dmax=6.0mm
RA6-PA66-NA 151-13019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) RA6-PA66-NA 151-13019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for hole (round), inside serrated, ⌀3.5-34.0mm, natural/grey, 500pcs.
Disc feature prevents rattling in high-vibration applications and protects against debris ingress.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀3.5-34.0mm, natural/grey, 500pcs.
T30RFT5-PA46-NA/GY 150-55948
Porovnat
Přidat do sledovaných položek
500 pcs.
Natural (NA), Grey (GY) T30RFT5-PA46-NA/GY 150-55948
Fixing tie for hole (round), inside serrated, ⌀4.0-45.0mm, black, 500pcs.
Disc feature prevents rattling in high-vibration applications and protects against debris ingress.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50RFT5-PA66HS/PA66HIRHS-BK 156-00025
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50RFT5-PA66HS/PA66HIRHS-BK 156-00025
Fixing tie for hole (round), outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Porovnat
Fixing tie for hole (round), outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSFT6-PA66HS/PA66HIRHS-BK 156-00076
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROSFT6-PA66HS/PA66HIRHS-BK 156-00076
Fixing tie for hole (round), inside serrated, ⌀5.0-75.0mm, black, 500pcs.
These fir tree fixings can also be used in threaded, blind holes.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀5.0-75.0mm, black, 500pcs.
T80IFT6LG-PA66HS/PA66HIRHS-BK 150-31096
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T80IFT6LG-PA66HS/PA66HIRHS-BK 150-31096
Fixing tie for hole (round), inside serrated, ⌀5.0-45.0mm, black, 500pcs.
2-piece fixing tie with fir tree for round holes.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀5.0-45.0mm, black, 500pcs.
T50RFT8-PA66HS-BK 111-85880
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50RFT8-PA66HS-BK 111-85880
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀5.6 mm, 180°, black, 280pcs.
Porovnat
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀5.6 mm, 180°, black, 280pcs.
RCBHANGER-PA66HIRHSUV/ZN-BK 151-02875
Porovnat
Přidat do sledovaných položek
280 pcs.
Black (BK) RCBHANGER-PA66HIRHSUV/ZN-BK 151-02875
Low Profile Shim Boots
313E445-457 Series supplied / fully recovered.
Porovnat
Low Profile Shim Boots
313E447-9-200-PO-X-BK 422-10106
Porovnat
Přidat do sledovaných položek
5 pcs.
Black (BK) 313E447-9-200-PO-X-BK 422-10106
Bottle Shapes, VG style
177-1-G supplied / fully recovered.
Porovnat
Bottle Shapes, VG style
177-1-B7-PO-X-BK 401-77120
Porovnat
Přidat do sledovaných položek
1
Black (BK) 177-1-B7-PO-X-BK 401-77120
Right-Angle Shapes, VG style
1135-1-G supplied / fully recovered.
Porovnat
Right-Angle Shapes, VG style
1136-1-B7-PO-X-BK 411-36120
Porovnat
Přidat do sledovaných položek
1 EA
Black (BK) 1136-1-B7-PO-X-BK 411-36120
Fitting for corrugated tubing, nom⌀16mm, M20, 45°, black, 10pcs.
HelaGuard HG-45CG 45° Cable Gland Fitting, External Thread, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀16mm, M20, 45°, black, 10pcs.
HG16-45CG-M20-PA66/NPB-BK 166-23903
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG16-45CG-M20-PA66/NPB-BK 166-23903
Fitting for corrugated tubing, nom⌀21mm, M20, 45°, black, 10pcs.
HelaGuard HG-45CG 45° Cable Gland Fitting, External Thread, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀21mm, M20, 45°, black, 10pcs.
HG21-45CG-M20-PA66/NPB-BK 166-23904
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG21-45CG-M20-PA66/NPB-BK 166-23904
Fitting for corrugated tubing, nom⌀28mm, M25, 45°, black, 10pcs.
HelaGuard HG-45CG 45° Cable Gland Fitting, External Thread, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀28mm, M25, 45°, black, 10pcs.
HG28-45CG-M25-PA66/NPB-BK 166-23905
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG28-45CG-M25-PA66/NPB-BK 166-23905
Fitting for corrugated tubing, nom⌀34mm, M32, 45°, black, 10pcs.
HelaGuard HG-45CG 45° Cable Gland Fitting, External Thread, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀34mm, M32, 45°, black, 10pcs.
HG34-45CG-M32-PA66/NPB-BK 166-23906
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG34-45CG-M32-PA66/NPB-BK 166-23906
Fitting for corrugated tubing, nom⌀42mm, M40, 45°, black, 2pcs.
HelaGuard HG-45CG 45° Cable Gland Fitting, External Thread, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀42mm, M40, 45°, black, 2pcs.
HG42-45CG-M40-PA66/NPB-BK 166-23907
Porovnat
Přidat do sledovaných položek
2 pcs.
Black (BK) HG42-45CG-M40-PA66/NPB-BK 166-23907
Fitting for corrugated tubing, nom⌀54mm, M50, 45°, black, 2pcs.
HelaGuard HG-45CG 45° Cable Gland Fitting, External Thread, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀54mm, M50, 45°, black, 2pcs.
HG54-45CG-M50-PA66/NPB-BK 166-23908
Porovnat
Přidat do sledovaných položek
2 pcs.
Black (BK) HG54-45CG-M50-PA66/NPB-BK 166-23908
Fitting for metallic conduits, nom⌀16mm, M16, metal, 10pcs.
PCS-SCG Compression Fitting with Strain Relief and Cable Seal.
Porovnat
Fitting for metallic conduits, nom⌀16mm, M16, metal, 10pcs.
PCS16-SCG-M16-PA66/NPB/TPE-ML 166-36101
Porovnat
Přidat do sledovaných položek
10 pcs.
Metal (ML) PCS16-SCG-M16-PA66/NPB/TPE-ML 166-36101
Fitting for metallic conduits, nom⌀25mm, M25, metal, 10pcs.
PCS-SCG Compression Fitting with Strain Relief and Cable Seal.
Porovnat
Fitting for metallic conduits, nom⌀25mm, M25, metal, 10pcs.
PCS25-SCG-M25-PA66/NPB/TPE-ML 166-36103
Porovnat
Přidat do sledovaných položek
10 pcs.
Metal (ML) PCS25-SCG-M25-PA66/NPB/TPE-ML 166-36103
Fitting for metallic conduits, nom⌀16mm, M16, metal, 10pcs.
LTS-SCG Compression Fitting with Strain Relief and Cable Seal.
Porovnat
Fitting for metallic conduits, nom⌀16mm, M16, metal, 10pcs.
LTS16-SCG-M16-PA66/NPB/TPE-ML 166-36201
Porovnat
Přidat do sledovaných položek
10 pcs.
Metal (ML) LTS16-SCG-M16-PA66/NPB/TPE-ML 166-36201
Fitting for corrugated tubing, nom⌀16mm, M16, black, 10pcs.
HelaGuard HG-SCG Straight Cable Gland Fitting, External Thread, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀16mm, M16, black, 10pcs.
HG16-SCG-M16-PA66/NPB-BK 166-21501
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG16-SCG-M16-PA66/NPB-BK 166-21501
Fitting for corrugated tubing, nom⌀13mm, M16, 90°, black, 10pcs.
HelaGuard HG-90CG 90° Cable Gland Fitting, External Thread, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀13mm, M16, 90°, black, 10pcs.
HG13-90CG-M16-PA66/NPB-BK 166-23301
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG13-90CG-M16-PA66/NPB-BK 166-23301
Fitting for corrugated tubing, nom⌀16mm, M16, 90°, black, 10pcs.
HelaGuard HG-90CG 90° Cable Gland Fitting, External Thread, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀16mm, M16, 90°, black, 10pcs.
HG16-90CG-M16-PA66/NPB-BK 166-23302
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG16-90CG-M16-PA66/NPB-BK 166-23302
Fitting for corrugated tubing, nom⌀16mm, M20, 90°, black, 10pcs.
HelaGuard HG-90CG 90° Cable Gland Fitting, External Thread, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀16mm, M20, 90°, black, 10pcs.
HG16-90CG-M20-PA66/NPB-BK 166-23303
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG16-90CG-M20-PA66/NPB-BK 166-23303
Fitting for corrugated tubing, nom⌀21mm, M20, 90°, black, 10pcs.
HelaGuard HG-90CG 90° Cable Gland Fitting, External Thread, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀21mm, M20, 90°, black, 10pcs.
HG21-90CG-M20-PA66/NPB-BK 166-23304
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG21-90CG-M20-PA66/NPB-BK 166-23304
Fitting for corrugated tubing, nom⌀28mm, M25, 90°, black, 10pcs.
HelaGuard HG-90CG 90° Cable Gland Fitting, External Thread, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀28mm, M25, 90°, black, 10pcs.
HG28-90CG-M25-PA66/NPB-BK 166-23305
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG28-90CG-M25-PA66/NPB-BK 166-23305
Fitting for corrugated tubing, nom⌀34mm, M32, 90°, black, 10pcs.
HelaGuard HG-90CG 90° Cable Gland Fitting, External Thread, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀34mm, M32, 90°, black, 10pcs.
HG34-90CG-M32-PA66/NPB-BK 166-23306
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG34-90CG-M32-PA66/NPB-BK 166-23306
Fitting for corrugated tubing, nom⌀42mm, M40, 90°, black, 2pcs.
HelaGuard HG-90CG 90° Cable Gland Fitting, External Thread, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀42mm, M40, 90°, black, 2pcs.
HG42-90CG-M40-PA66/NPB-BK 166-23307
Porovnat
Přidat do sledovaných položek
2 pcs.
Black (BK) HG42-90CG-M40-PA66/NPB-BK 166-23307
Fitting for corrugated tubing, nom⌀54mm, M50, 90°, black, 2pcs.
HelaGuard HG-90CG 90° Cable Gland Fitting, External Thread, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀54mm, M50, 90°, black, 2pcs.
HG54-90CG-M50-PA66/NPB-BK 166-23308
Porovnat
Přidat do sledovaných položek
2 pcs.
Black (BK) HG54-90CG-M50-PA66/NPB-BK 166-23308
Cable tie mount for hole (round), Wmax=9.0mm, ⌀7.0 - 8.0 mm, black, 100pcs.
LOK01, LOK01B, LOK01S fixing bases.
Porovnat
Cable tie mount for hole (round), Wmax=9.0mm, ⌀7.0 - 8.0 mm, black, 100pcs.
LOK05-PA6HIR-BK 151-80700
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) LOK05-PA6HIR-BK 151-80700
2-Way Outlet Shape in line for Low Voltage black, PO-X, up to 3:1
223-2 supplied / fully recovered.
Porovnat
2-Way Outlet Shape in line for Low Voltage black, PO-X, up to 3:1
218-2-B8W-PO-X-BK 402-18051
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) 218-2-B8W-PO-X-BK 402-18051
3-Way Outlet Shapes, Breakout Boots
300 Series supplied / fully recovered.
Porovnat
3-Way Outlet Shapes, Breakout Boots
320-1-B8W2-PO-X-BK 403-20014
Porovnat
Přidat do sledovaných položek
1 pc.
Black (BK) 320-1-B8W2-PO-X-BK 403-20014
3-Way Outlet Shapes, Breakout Boots
300 Series supplied / fully recovered.
Porovnat
3-Way Outlet Shapes, Breakout Boots
354-1-B8W-PO-X-BK 403-54004
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) 354-1-B8W-PO-X-BK 403-54004
Cable clip for hole (round), ⌀6.5 mm, Dmin=4.5mm, Dmax=16mm
Harness clip OHC8 for pre assembling on harnesses.
Porovnat
Cable clip for hole (round), ⌀6.5 mm, Dmin=4.5mm, Dmax=16mm
OHC16-PA66HIRHS-BK 151-00335
Porovnat
Přidat do sledovaných položek
2000 pcs.
Black (BK) OHC16-PA66HIRHS-BK 151-00335
Cable clip for hole (oval), T=0.7-2.5mm, ⌀6.2 x 12.2 mm, Dmin=3.0mm, Dmax=15.0mm
Harness clip HC90SFT for oval holes and varying bundle diameter.
Porovnat
Cable clip for hole (oval), T=0.7-2.5mm, ⌀6.2 x 12.2 mm, Dmin=3.0mm, Dmax=15.0mm
HC90SFT62x122-PA6HIR-BK 151-00164
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) HC90SFT62x122-PA6HIR-BK 151-00164
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for adhesive use, Wmax=4.1mm, ⌀3.1 mm, Adhesive, black, 100pcs.
4-way cable tie entry for more installation options.
Porovnat
Cable tie mount for adhesive use, Wmax=4.1mm, ⌀3.1 mm, Adhesive, black, 100pcs.
MB3A-PA66-BK 151-28320
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) MB3A-PA66-BK 151-28320
Cable tie mount for adhesive use, Wmax=5.4mm, ⌀4.0 mm, black, 100pcs.
MB-Series Mounts with square design.
Porovnat
Cable tie mount for adhesive use, Wmax=5.4mm, ⌀4.0 mm, black, 100pcs.
MB4A3-PA66-BK 151-28430
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) MB4A3-PA66-BK 151-28430
Heat shrink marker, thermal transfer print, ladder-style, 3.0mm/1.1mm, W=16.0mm, yellow, 3000pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 3.0mm/1.1mm, W=16.0mm, yellow, 3000pcs.
HST3-1YE-2S-PO-X-YE 553-50077
Porovnat
Přidat do sledovaných položek
3000 pack
Yellow (YE) HST3-1YE-2S-PO-X-YE 553-50077
Heat shrink marker, thermal transfer print, ladder-style, 3.0mm/1.1mm, W=48.26mm, white, 2500pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 3.0mm/1.1mm, W=48.26mm, white, 2500pcs.
HST3-1WH-PO-X-WH 553-50078
Porovnat
Přidat do sledovaných položek
2500 pack
White (WH) HST3-1WH-PO-X-WH 553-50078
Heat shrink marker, thermal transfer print, ladder-style, 3.0mm/1.1mm, W=12.07mm, white, 4000pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 3.0mm/1.1mm, W=12.07mm, white, 4000pcs.
HST3-1WH-3S-PO-X-WH 553-50088
Porovnat
Přidat do sledovaných položek
4000 pack
White (WH) HST3-1WH-3S-PO-X-WH 553-50088
Heat shrink marker, thermal transfer print, ladder-style, 3.0mm/1.1mm, W=48.0mm, white, 8000pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 3.0mm/1.1mm, W=48.0mm, white, 8000pcs.
HST3-1WH-PO-X-WH 553-50194
Porovnat
Přidat do sledovaných položek
8000 pcs.
White (WH) HST3-1WH-PO-X-WH 553-50194
Heat shrink marker, thermal transfer print, ladder-style, 4.5mm/1.6mm, W=48.26mm, white, 5000pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 4.5mm/1.6mm, W=48.26mm, white, 5000pcs.
HST4.8-1.6WH-PO-X-WH 553-50079
Porovnat
Přidat do sledovaných položek
5000 pack
White (WH) HST4.8-1.6WH-PO-X-WH 553-50079
Heat shrink marker, thermal transfer print, ladder-style, 4.5mm/1.6mm, W=12.07mm, white, 4000pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 4.5mm/1.6mm, W=12.07mm, white, 4000pcs.
HST4.8-1.6WH-3S-PO-X-WH 553-50081
Porovnat
Přidat do sledovaných položek
4000 pack
White (WH) HST4.8-1.6WH-3S-PO-X-WH 553-50081
Heat shrink marker, thermal transfer print, ladder-style, 4.5mm/1.6mm, W=48.26mm, white, 3000pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 4.5mm/1.6mm, W=48.26mm, white, 3000pcs.
HST4.8-1.6WH-PO-X-WH 553-50177
Porovnat
Přidat do sledovaných položek
3000 pcs.
White (WH) HST4.8-1.6WH-PO-X-WH 553-50177
Heat shrink marker, thermal transfer print, ladder-style, 4.5mm/1.6mm, W=48.26mm, white, 6400pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 4.5mm/1.6mm, W=48.26mm, white, 6400pcs.
HST4.8-1.6WH-PO-X-WH 553-50195
Porovnat
Přidat do sledovaných položek
6400 pcs.
White (WH) HST4.8-1.6WH-PO-X-WH 553-50195
Heat shrink marker, thermal transfer print, ladder-style, 6.0mm/2.2mm, W=16.08mm, white, 750pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 6.0mm/2.2mm, W=16.08mm, white, 750pcs.
HST6-2WH-2S-PO-X-WH 553-50082
Porovnat
Přidat do sledovaných položek
1 pack
White (WH) HST6-2WH-2S-PO-X-WH 553-50082
Heat shrink marker, thermal transfer print, ladder-style, 6.0mm/2.2mm, W=24.13mm, yellow, 2000pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 6.0mm/2.2mm, W=24.13mm, yellow, 2000pcs.
HST6-2YE-S-PO-X-YE 553-50085
Porovnat
Přidat do sledovaných položek
1 pack
Yellow (YE) HST6-2YE-S-PO-X-YE 553-50085
Heat shrink marker, thermal transfer print, ladder-style, 6.0mm/2.2mm, W=48.26mm, white, 5300pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 6.0mm/2.2mm, W=48.26mm, white, 5300pcs.
HST6-2WH-PO-X-WH 553-50196
Porovnat
Přidat do sledovaných položek
5300 pcs.
White (WH) HST6-2WH-PO-X-WH 553-50196
Heat shrink marker, thermal transfer print, ladder-style, 6.0mm/2.2mm, W=48.26mm, white, 1000pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 6.0mm/2.2mm, W=48.26mm, white, 1000pcs.
HST6-2WHAP-PO-X-WH 553-50204
Porovnat
Přidat do sledovaných položek
1000 pcs.
White (WH) HST6-2WHAP-PO-X-WH 553-50204
Heat shrink marker, thermal transfer print, ladder-style, 9.0mm/3.1mm, W=12.07mm, white, 1000pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 9.0mm/3.1mm, W=12.07mm, white, 1000pcs.
HST9-3WH-3S-PO-X-WH 553-50066
Porovnat
Přidat do sledovaných položek
1 pack
White (WH) HST9-3WH-3S-PO-X-WH 553-50066
Heat shrink marker, thermal transfer print, ladder-style, 9.0mm/3.1mm, W=48.16mm, white, 4000pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 9.0mm/3.1mm, W=48.16mm, white, 4000pcs.
HST9-3WH-PO-X-WH 553-50197
Porovnat
Přidat do sledovaných položek
4000 pcs.
White (WH) HST9-3WH-PO-X-WH 553-50197
Heat shrink marker, thermal transfer print, ladder-style, 9.0mm/3.1mm, W=48.26mm, white, 250pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 9.0mm/3.1mm, W=48.26mm, white, 250pcs.
HST9-3WHAP-PO-X-WH 553-50205
Porovnat
Přidat do sledovaných položek
250 pcs.
White (WH) HST9-3WHAP-PO-X-WH 553-50205
Heat shrink marker, thermal transfer print, ladder-style, 18.6mm/6.35mm, W=48.26mm, white, 2200pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 18.6mm/6.35mm, W=48.26mm, white, 2200pcs.
HST18-6WH-PO-X-WH 553-50199
Porovnat
Přidat do sledovaných položek
2200 pcs.
White (WH) HST18-6WH-PO-X-WH 553-50199
Heat shrink marker, thermal transfer print, ladder-style, 18.6mm/6.35mm, W=48.26mm, white, 1000pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 18.6mm/6.35mm, W=48.26mm, white, 1000pcs.
HST18-6-PO-X-WH 553-50208
Porovnat
Přidat do sledovaných položek
1000 pcs.
White (WH) HST18-6-PO-X-WH 553-50208
Heat shrink marker, thermal transfer print, ladder-style, 26.0mm/8.4mm, W=48.26mm, white, 1700pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 26.0mm/8.4mm, W=48.26mm, white, 1700pcs.
HST24-8WH-PO-X-WH 553-50200
Porovnat
Přidat do sledovaných položek
1700 pcs.
White (WH) HST24-8WH-PO-X-WH 553-50200
Heat shrink marker, thermal transfer print, ladder-style, 38.1mm/13mm, W=48.26mm, white, 150pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 38.1mm/13mm, W=48.26mm, white, 150pcs.
HST39-13WH-PO-X-WH 553-50209
Porovnat
Přidat do sledovaných položek
150
White (WH) HST39-13WH-PO-X-WH 553-50209
Heat shrink marker, thermal transfer print, ladder-style, 11.9mm/4.2mm, W=48.26mm, white, 3200pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 11.9mm/4.2mm, W=48.26mm, white, 3200pcs.
HST12-4WH-PO-X-WH 553-50198
Porovnat
Přidat do sledovaných položek
3200 pcs.
White (WH) HST12-4WH-PO-X-WH 553-50198
Heat shrink marker, thermal transfer print, ladder-style, 11.9mm/4.2mm, W=24.1mm, white, 1500pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 11.9mm/4.2mm, W=24.1mm, white, 1500pcs.
HST12-4WH-S-PO-X-WH 553-50201
Porovnat
Přidat do sledovaných položek
1500 pcs.
White (WH) HST12-4WH-S-PO-X-WH 553-50201
Heat shrink marker, thermal transfer print, ladder-style, 11.9mm/4.2mm, W=48.26mm, white, 250pcs.
Nonslip printable liner allows additional marker data to be printed on the reverse side for records and placement instructions.
Porovnat
Heat shrink marker, thermal transfer print, ladder-style, 11.9mm/4.2mm, W=48.26mm, white, 250pcs.
HST12-4WHAP-PO-X-WH 553-50206
Porovnat
Přidat do sledovaných položek
250 pcs.
White (WH) HST12-4WHAP-PO-X-WH 553-50206
Fixing tie for edge, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Porovnat
Fixing tie for edge, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50REC4A-PA66HS/PA6HIRHS-BK 156-02424
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50REC4A-PA66HS/PA6HIRHS-BK 156-02424
Fixing tie for edge, inside serrated, ⌀1.2-45.0mm, black, 500pcs.
Porovnat
Fixing tie for edge, inside serrated, ⌀1.2-45.0mm, black, 500pcs.
T50REC9-PA66HS/PA66HIRHS-BK 156-01280
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50REC9-PA66HS/PA66HIRHS-BK 156-01280
Cable clip, T=0.65 - 0.85 mm
0.6 - 4.2mm, ⌀4.9 – 5.1 mm/6.4 - 7.0 mm
Couple Connector for hole 4.9 - 5.1 mm and for hole 6.4- 7.0 mm.
Porovnat
Cable clip, T=0.65 - 0.85 mm
0.6 - 4.2mm, ⌀4.9 – 5.1 mm/6.4 - 7.0 mm
AH5.0FT6.7-PA66HIRHS-BK 151-03386
Porovnat
Přidat do sledovaných položek
2500 pcs.
Black (BK) AH5.0FT6.7-PA66HIRHS-BK 151-03386
Cable label, White/Transparent
Palm sized hand held self-laminating label dispenser RiteOn.
Porovnat
Cable label, White/Transparent
RO202-1401-CL/WH 550-14012
Porovnat
Přidat do sledovaných položek
150 pack
White (WH), Transparent (CL) RO202-1401-CL/WH 550-14012
Wiring duct, wide fingers, halogen-free, 37.5x75.0mm, L=2m, grey, 24.0m
Porovnat
Wiring duct, wide fingers, halogen-free, 37.5x75.0mm, L=2m, grey, 24.0m
HTWD-HF-37.5X75-PC/ABS-GY 183-13775
Porovnat
Přidat do sledovaných položek
24.0 m
Grey RAL 7035 (RAL7035) HTWD-HF-37.5X75-PC/ABS-GY 183-13775
Wiring duct, wide fingers, halogen-free, 50x75.0mm, L=2m, grey, 28m
Porovnat
Wiring duct, wide fingers, halogen-free, 50x75.0mm, L=2m, grey, 28m
HTWD-HF-50X75-PC/ABS-GY 183-15075
Porovnat
Přidat do sledovaných položek
28 m
Grey RAL 7035 (RAL7035) HTWD-HF-50X75-PC/ABS-GY 183-15075
Wiring duct, wide fingers, halogen-free, 75x75.0mm, L=2m, grey, 24.0m
Porovnat
Wiring duct, wide fingers, halogen-free, 75x75.0mm, L=2m, grey, 24.0m
HTWD-HF-75X75-PC/ABS-GY 183-17575
Porovnat
Přidat do sledovaných položek
24.0 m
Grey RAL 7035 (RAL7035) HTWD-HF-75X75-PC/ABS-GY 183-17575
RFID hard tag, 860-960 MHz (UHF), tie-on, 78.00x25.00mm, H=25.00mm, white, 600pcs.
FLEXTAG - Flexible UHF RFID Tag with mounting holes for attachment with cable ties.
Porovnat
RFID hard tag, 860-960 MHz (UHF), tie-on, 78.00x25.00mm, H=25.00mm, white, 600pcs.
RFID_FLEXTAG_78x25-TPU-WH 556-00856
Porovnat
Přidat do sledovaných položek
600 pcs.
White (WH) RFID_FLEXTAG_78x25-TPU-WH 556-00856
Cable tie mount for adhesive use, Wmax=4.1mm, ⌀3.1 mm, Adhesive, white, 100pcs.
4-way cable tie entry for more installation options.
Porovnat
Cable tie mount for adhesive use, Wmax=4.1mm, ⌀3.1 mm, Adhesive, white, 100pcs.
MB3A-PA66-WH 151-28349
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) MB3A-PA66-WH 151-28349
Heat shrink marker, halogen free/UV resistant, thermal transfer print, ladder-style, 3.2mm/1.6mm, W=6mm, yellow, 2000pcs.
Porovnat
Heat shrink marker, halogen free/UV resistant, thermal transfer print, ladder-style, 3.2mm/1.6mm, W=6mm, yellow, 2000pcs.
TLFX32DS-2X25YE-PO-X-YE 553-60121
Porovnat
Přidat do sledovaných položek
2000 reel
Yellow (YE) TLFX32DS-2X25YE-PO-X-YE 553-60121
Heat shrink marker, halogen free/UV resistant, thermal transfer print, ladder-style, 3.2mm/1.6mm, W=6mm, yellow, 1000pcs.
Porovnat
Heat shrink marker, halogen free/UV resistant, thermal transfer print, ladder-style, 3.2mm/1.6mm, W=6mm, yellow, 1000pcs.
TLFX32DS-1X50YE-PO-X-YE 553-60125
Porovnat
Přidat do sledovaných položek
1000 reel
Yellow (YE) TLFX32DS-1X50YE-PO-X-YE 553-60125
Fitting for corrugated tubing, nom⌀16mm, M20, 45°, black, 10pcs.
HelaGuard HGL-45CG 45° Cable Gland Fitting, External Thread, IP68.
Porovnat
Fitting for corrugated tubing, nom⌀16mm, M20, 45°, black, 10pcs.
HGL16-45CG-M20-PA66/NPB/TPE-BK 166-24503
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HGL16-45CG-M20-PA66/NPB/TPE-BK 166-24503
Fitting for corrugated tubing, nom⌀21mm, M20, 45°, black, 10pcs.
HelaGuard HGL-45CG 45° Cable Gland Fitting, External Thread, IP68.
Porovnat
Fitting for corrugated tubing, nom⌀21mm, M20, 45°, black, 10pcs.
HGL21-45CG-M20-PA66/NPB/TPE-BK 166-24504
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HGL21-45CG-M20-PA66/NPB/TPE-BK 166-24504
Fitting for corrugated tubing, nom⌀28mm, M25, 45°, black, 10pcs.
HelaGuard HGL-45CG 45° Cable Gland Fitting, External Thread, IP68.
Porovnat
Fitting for corrugated tubing, nom⌀28mm, M25, 45°, black, 10pcs.
HGL28-45CG-M25-PA66/NPB/TPE-BK 166-24505
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HGL28-45CG-M25-PA66/NPB/TPE-BK 166-24505
Fitting for corrugated tubing, nom⌀34mm, M32, 45°, black, 10pcs.
HelaGuard HGL-45CG 45° Cable Gland Fitting, External Thread, IP68.
Porovnat
Fitting for corrugated tubing, nom⌀34mm, M32, 45°, black, 10pcs.
HGL34-45CG-M32-PA66/NPB/TPE-BK 166-24506
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HGL34-45CG-M32-PA66/NPB/TPE-BK 166-24506
Fitting for corrugated tubing, nom⌀42mm, M40, 45°, black, 2pcs.
HelaGuard HGL-45CG 45° Cable Gland Fitting, External Thread, IP68.
Porovnat
Fitting for corrugated tubing, nom⌀42mm, M40, 45°, black, 2pcs.
HGL42-45CG-M40-PA66/NPB/TPE-BK 166-24507
Porovnat
Přidat do sledovaných položek
2 pcs.
Black (BK) HGL42-45CG-M40-PA66/NPB/TPE-BK 166-24507
Fitting for corrugated tubing, nom⌀54mm, M50, 45°, black, 2pcs.
HelaGuard HGL-45CG 45° Cable Gland Fitting, External Thread, IP68.
Porovnat
Fitting for corrugated tubing, nom⌀54mm, M50, 45°, black, 2pcs.
HGL54-45CG-M50-PA66/NPB/TPE-BK 166-24508
Porovnat
Přidat do sledovaných položek
2 pcs.
Black (BK) HGL54-45CG-M50-PA66/NPB/TPE-BK 166-24508
Fitting for metallic conduits, nom⌀20mm, M20, metal, 10pcs.
LTS-SCG Compression Fitting with Strain Relief and Cable Seal.
Porovnat
Fitting for metallic conduits, nom⌀20mm, M20, metal, 10pcs.
LTS20-SCG-M20-PA66/NPB/TPE-ML 166-36202
Porovnat
Přidat do sledovaných položek
10 pcs.
Metal (ML) LTS20-SCG-M20-PA66/NPB/TPE-ML 166-36202
Fitting for metallic conduits, nom⌀25mm, M25, metal, 10pcs.
LTS-SCG Compression Fitting with Strain Relief and Cable Seal.
Porovnat
Fitting for metallic conduits, nom⌀25mm, M25, metal, 10pcs.
LTS25-SCG-M25-PA66/NPB/TPE-ML 166-36203
Porovnat
Přidat do sledovaných položek
10 pcs.
Metal (ML) LTS25-SCG-M25-PA66/NPB/TPE-ML 166-36203
Fitting for metallic conduits, nom⌀32mm, M32, metal, 2pcs.
LTS-SCG Compression Fitting with Strain Relief and Cable Seal.
Porovnat
Fitting for metallic conduits, nom⌀32mm, M32, metal, 2pcs.
LTS32-SCG-M32-PA66/NPB/TPE-ML 166-36204
Porovnat
Přidat do sledovaných položek
2 pcs.
Metal (ML) LTS32-SCG-M32-PA66/NPB/TPE-ML 166-36204
Fitting for corrugated tubing, nom⌀21mm, M20, black, 10pcs.
HelaGuard HG-SCG Straight Cable Gland Fitting, External Thread, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀21mm, M20, black, 10pcs.
HG21-SCG-M20-PA66/NPB-BK 166-21503
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG21-SCG-M20-PA66/NPB-BK 166-21503
Fitting for corrugated tubing, nom⌀34mm, M32, black, 10pcs.
HelaGuard HG-SCG Straight Cable Gland Fitting, External Thread, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀34mm, M32, black, 10pcs.
HG34-SCG-M32-PA66/NPB-BK 166-21505
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HG34-SCG-M32-PA66/NPB-BK 166-21505
Fitting for corrugated tubing, nom⌀42mm, M40, black, 2pcs.
HelaGuard HG-SCG Straight Cable Gland Fitting, External Thread, IP66.
Porovnat
Fitting for corrugated tubing, nom⌀42mm, M40, black, 2pcs.
HG42-SCG-M40-PA66/NPB-BK 166-21506
Porovnat
Přidat do sledovaných položek
2 pcs.
Black (BK) HG42-SCG-M40-PA66/NPB-BK 166-21506
Facebook  Instagram  Twitter  YouTube  LinkedIn  Corporate Blog 
Kontakt VOP Impressum Mapa stránek Newsletter Pokyny a závazky Zásady ochrany osobních údajů
Aktualizace: 09/11/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.291.3) | Aktualizace: 09/11/2025 | Nastavení ochrany osobních údajů
Hledat prodejce Kontakt