Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
19/12/2025

Výsledky pro "HARD LINE - High frequency (HF)"

Nalezeno 4 593 výrobků 0 dalších položek
Poznámka:  Kombinace hledaných výrazů nevrátila žádné odpovídající výsledky.  Níže jsou výsledky, které odpovídají dílům dle Vašeho vyhledávání.

Typ: Zkuste změnit nebo odstranit výrazy, abyste zlepšili relevanci výsledků vyhledávání.

K dispozici jsou výsledky v následujících kategoriích:
Cable Ties and Fixings

Cable Ties and Fixings  (1831)

Cable Ties Inside Serrated  (382) Cable Ties Outside Serrated  (69) Cable Ties Without Serration  (33) Cable Ties, Releasable  (16) Cable Ties, Stainless Steel  (91) Cable Ties With Fixing Elements  (426) Cable Tie Mounts  (156) Fixing Elements  (242) Clips, Clamps and Plugs  (673)
Cable Ties and Fixings
Cable Ties and Fixings (1831)
Insulation

Insulation  (839)

Heat Shrink Tubing  (693) Heat Shrinkable Moulded Shapes  (82) Insulating tubes  (69)
Insulation
Insulation (839)
Cable Protection Systems

Cable Protection Systems  (953)

Non-Metallic Conduit Systems  (476) Metallic Conduit Systems  (64) Spiral-Reinforced Conduit Systems  (41) Conduit System Accessories  (31) Protective Tubing and Spiral Binding  (60) Expandable Braided Sleeves  (112) Open Woven Sleeves  (153) Burst Protective Sleeves  (16) Electromagnetic Shielding Sleeves  (10) Edge Protection  (16) Grommets  (60) Wiring Ducts and Accessories  (60)
Cable Protection Systems
Cable Protection Systems (953)
Electrical Installation

Electrical Installation  (244)

Wire Connectors  (3) Downlight Covers  (3) Cable Rods  (3) Electrical Tapes  (91) Cast Resin Technology  (72) Gel Technology  (11) Industrial Silicones  (61)
Electrical Installation
Electrical Installation (244)
Identification Systems

Identification Systems  (666)

Wire and Cable Markers  (347) Control Panel Labelling  (175) Industrial Identification  (260) RFID tags and cable ties  (56) Security Labeling  (18) Hazardous Area Identification  (6) Printers and Software  (29)
Identification Systems
Identification Systems (666)
Application Tooling

Application Tooling  (64)

Automatic Cable Tying System  (24) Application Tooling for Cable Ties  (33) Application Tooling for Snappers  (2) Application Tooling for Heat Shrinkable Tubing  (1) Application Tooling for Non Shrinkable Tubing  (4)
Application Tooling
Application Tooling (64)
4 593 produkty
Resetovat vše
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C P-Clamp with chloroprene insert.
Porovnat
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 760.0x7.6mm, ⌀5.0-225mm, black, 50pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 760.0x7.6mm, ⌀5.0-225mm, black, 50pcs.
T120L-PA66HIR(S)-BK 111-12402
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) T120L-PA66HIR(S)-BK 111-12402
Cable tie mount for adhesive use, Wmax=5.6mm, ⌀4.0 mm, black, 100pcs.
SolidTack Family with special adhesive.
Porovnat
Cable tie mount for adhesive use, Wmax=5.6mm, ⌀4.0 mm, black, 100pcs.
MB4A-PT1100-PA66-BK 151-01193
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) MB4A-PT1100-PA66-BK 151-01193
Cable tie mount for adhesive use, Wmax=4.4mm, ⌀3.1 mm, white, 100pcs.
SolidTack Family with special adhesive.
Porovnat
Cable tie mount for adhesive use, Wmax=4.4mm, ⌀3.1 mm, white, 100pcs.
MB3APT-A-PA66-WH 151-02978
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) MB3APT-A-PA66-WH 151-02978
Cable tie mount for adhesive use, Wmax=5.6mm, ⌀4.0 mm, white, 100pcs.
SolidTack Mount MB4APT with special adhesive.
Porovnat
Cable tie mount for adhesive use, Wmax=5.6mm, ⌀4.0 mm, white, 100pcs.
MB4APT-A-PA66-WH 151-02246
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) MB4APT-A-PA66-WH 151-02246
Cable tie mount for adhesive use, Wmax=4.8mm, Adhesive, black, 50pcs.
Self-adhesive cable tie mount with 360° rotatable design.
Porovnat
Cable tie mount for adhesive use, Wmax=4.8mm, Adhesive, black, 50pcs.
SMB4APT-A-PA66HS/A-BK 151-03334
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) SMB4APT-A-PA66HS/A-BK 151-03334
Cable tie mount for adhesive use, Wmax=4.8mm, Adhesive, black, 50pcs.
Self-adhesive cable tie mount with 360° rotatable design.
Porovnat
Cable tie mount for adhesive use, Wmax=4.8mm, Adhesive, black, 50pcs.
SMB4APT-A-PA66HS/A-BK 151-03364
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) SMB4APT-A-PA66HS/A-BK 151-03364
Heat shrinkable tubing 2:1 (2.4/0.8 mm), self extinguishing and overexpanded, black, 300 m reel
TCN20 Overexpanded - reliable insulation with an enhanced shrink ratio.
Porovnat
Heat shrinkable tubing 2:1 (2.4/0.8 mm), self extinguishing and overexpanded, black, 300 m reel
TCN20-2.4/0.8-PO-X-BK 300-73130
Porovnat
Přidat do sledovaných položek
300 metre
Black (BK) TCN20-2.4/0.8-PO-X-BK 300-73130
Heat shrinkable tubing 2:1 (6.6/2.4 mm), self extinguishing and overexpanded, black, 300 m reel
TCN20 Overexpanded - reliable insulation with an enhanced shrink ratio.
Porovnat
Heat shrinkable tubing 2:1 (6.6/2.4 mm), self extinguishing and overexpanded, black, 300 m reel
TCN20-6.6/2.4-PO-X-BK 300-73160
Porovnat
Přidat do sledovaných položek
300 metre
Black (BK) TCN20-6.6/2.4-PO-X-BK 300-73160
Heat shrinkable tubing 2:1 (9.5/3.2 mm), self extinguishing and overexpanded, black, 100 m reel
TCN20 Overexpanded - reliable insulation with an enhanced shrink ratio.
Porovnat
Heat shrinkable tubing 2:1 (9.5/3.2 mm), self extinguishing and overexpanded, black, 100 m reel
TCN20-9.5/3.2-PO-X-BK 300-73170
Porovnat
Přidat do sledovaných položek
100 metre
Black (BK) TCN20-9.5/3.2-PO-X-BK 300-73170
Heat shrinkable tubing 2:1 (12.7/4.8 mm), self extinguishing and overexpanded, black, 100 m reel
TCN20 Overexpanded - reliable insulation with an enhanced shrink ratio.
Porovnat
Heat shrinkable tubing 2:1 (12.7/4.8 mm), self extinguishing and overexpanded, black, 100 m reel
TCN20-12.7/4.8-PO-X-BK 300-73180
Porovnat
Přidat do sledovaných položek
100 metre
Black (BK) TCN20-12.7/4.8-PO-X-BK 300-73180
Heat shrinkable tubing 2:1 (19.0/6.4 mm), self extinguishing and overexpanded, black, 60 m reel
TCN20 Overexpanded - reliable insulation with an enhanced shrink ratio.
Porovnat
Heat shrinkable tubing 2:1 (19.0/6.4 mm), self extinguishing and overexpanded, black, 60 m reel
TCN20-19.0/6.4-PO-X-BK 300-73190
Porovnat
Přidat do sledovaných položek
60 metre
Black (BK) TCN20-19.0/6.4-PO-X-BK 300-73190
Heat shrinkable tubing 2:1 (38.0/12.7 mm), self extinguishing and overexpanded, black, 30 m reel
TCN20 Overexpanded - reliable insulation with an enhanced shrink ratio.
Porovnat
Heat shrinkable tubing 2:1 (38.0/12.7 mm), self extinguishing and overexpanded, black, 30 m reel
TCN20-38.0/12.7-PO-X-BK 300-73210
Porovnat
Přidat do sledovaných položek
30 metre
Black (BK) TCN20-38.0/12.7-PO-X-BK 300-73210
Label, white, thermal transfer print, 104.00mm, 75.0m
Helatag labels for permanent asset identification.
Porovnat
Label, white, thermal transfer print, 104.00mm, 75.0m
TAGR3TD1-829-WH 596-03029
Porovnat
Přidat do sledovaných položek
75.0 m
White gloss (GSWH) TAGR3TD1-829-WH 596-03029
Cable label, self laminating, UV resistant/outdoor use, yellow, thermal transfer print, 19.05x25.40mm, H2=57.10mm, 2500pcs.
Easy marking of flexible, semi-rigid and rigid cables and wires.
Porovnat
Cable label, self laminating, UV resistant/outdoor use, yellow, thermal transfer print, 19.05x25.40mm, H2=57.10mm, 2500pcs.
TAG9TD3-323-YE 596-09325
Porovnat
Přidat do sledovaných položek
2500 reel
Yellow (YE) TAG9TD3-323-YE 596-09325
Cable label, self laminating, UV resistant/outdoor use, white/transparent, thermal transfer print, 12.70x25.40mm, H2=36.50mm, 1500pcs.
Easy marking of flexible, semi-rigid and rigid cables and wires.
Porovnat
Cable label, self laminating, UV resistant/outdoor use, white/transparent, thermal transfer print, 12.70x25.40mm, H2=36.50mm, 1500pcs.
TAG22TD1-323-CL/WH 596-00124
Porovnat
Přidat do sledovaných položek
1500 pcs.
White (WH), Transparent (CL) TAG22TD1-323-CL/WH 596-00124
Cable label, self laminating, UV resistant/outdoor use, white/transparent, thermal transfer print, 25.40x25.40mm, H2=95.25mm, 500pcs.
Easy marking of flexible, semi-rigid and rigid cables and wires.
Porovnat
Cable label, self laminating, UV resistant/outdoor use, white/transparent, thermal transfer print, 25.40x25.40mm, H2=95.25mm, 500pcs.
TAG3TD1-323-CL/WH 596-00125
Porovnat
Přidat do sledovaných položek
500 pcs.
White (WH), Transparent (CL) TAG3TD1-323-CL/WH 596-00125
Cable tie inside serrated, 387x7.6mm, ⌀3.0-100mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 387x7.6mm, ⌀3.0-100mm, black, 100pcs.
T120R(E)-PA66HIR(S)-BK 111-12032
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T120R(E)-PA66HIR(S)-BK 111-12032
Thermal transfer printer, desktop, 300dpi, grey
TT4030 thermal transfer printer for high volumes.
Porovnat
Thermal transfer printer, desktop, 300dpi, grey
TT4030-PL-GY 556-04037
Porovnat
Přidat do sledovaných položek
1 pcs.
Grey (GY) TT4030-PL-GY 556-04037
Fixing tie for cable bundles, inside serrated, ⌀2.0-47.0mm, black, 1500pcs.
Porovnat
Fixing tie for cable bundles, inside serrated, ⌀2.0-47.0mm, black, 1500pcs.
T50RSINGLECOUPLER-PA66HIRHS-BK 156-01134
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50RSINGLECOUPLER-PA66HIRHS-BK 156-01134
Chloroprene Rubber Tubing 20x1.5mm black
H rubber tubing is highly flexible and easy to apply.
Porovnat
Chloroprene Rubber Tubing 20x1.5mm black
H15X20BK-CR-BK 600-02929
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) H15X20BK-CR-BK 600-02929
Chloroprene Rubber Tubing 25x2.5mm black
H rubber tubing is highly flexible and easy to apply.
Porovnat
Chloroprene Rubber Tubing 25x2.5mm black
H25X25BK-CR-BK 600-02934
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) H25X25BK-CR-BK 600-02934
Chloroprene Rubber Tubing 30x7.5mm black
H rubber tubing is highly flexible and easy to apply.
Porovnat
Chloroprene Rubber Tubing 30x7.5mm black
H75X30BK-CR-BK 600-02198
Porovnat
Přidat do sledovaných položek
250 pcs.
Black (BK) H75X30BK-CR-BK 600-02198
Chloroprene Tubing, ID= 10 mm, black (100 pcs.)
H rubber tubing is highly flexible and easy to apply.
Porovnat
Chloroprene Tubing, ID= 10 mm, black (100 pcs.)
TH100X35BK-CR-BK 600-02493
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) TH100X35BK-CR-BK 600-02493
Corrugated tubing, flame retardant, nom⌀28mm, OD=28.5mm, ID=21.7mm, black, 50m
HelaGuard HG-FR - Flame Retardent Corrugated Tubing.
Porovnat
Corrugated tubing, flame retardant, nom⌀28mm, OD=28.5mm, ID=21.7mm, black, 50m
HG-FR28-PA6FR-BK 166-11404
Porovnat
Přidat do sledovaných položek
50 metre
Black (BK) HG-FR28-PA6FR-BK 166-11404
Corrugated tubing, flame retardant, nom⌀34mm, OD=34.5mm, ID=28.1mm, black, 50m
HelaGuard HG-FR - Flame Retardent Corrugated Tubing.
Porovnat
Corrugated tubing, flame retardant, nom⌀34mm, OD=34.5mm, ID=28.1mm, black, 50m
HG-FR34-PA6FR-BK 166-11405
Porovnat
Přidat do sledovaných položek
50 metre
Black (BK) HG-FR34-PA6FR-BK 166-11405
Corrugated tubing, flame retardant, nom⌀42mm, OD=42.5mm, ID=35.5mm, black, 25m
HelaGuard HG-FR - Flame Retardent Corrugated Tubing.
Porovnat
Corrugated tubing, flame retardant, nom⌀42mm, OD=42.5mm, ID=35.5mm, black, 25m
HG-FR42-PA6FR-BK 166-11406
Porovnat
Přidat do sledovaných položek
25 metre
Black (BK) HG-FR42-PA6FR-BK 166-11406
Corrugated tubing, flame retardant, nom⌀54mm, OD=54.5mm, ID=47.2mm, black, 25m
HelaGuard HG-FR - Flame Retardent Corrugated Tubing.
Porovnat
Corrugated tubing, flame retardant, nom⌀54mm, OD=54.5mm, ID=47.2mm, black, 25m
HG-FR54-PA6FR-BK 166-11407
Porovnat
Přidat do sledovaných položek
25 metre
Black (BK) HG-FR54-PA6FR-BK 166-11407
Cable clip for hole (oval), T=0.6 - 5.0mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=12.2mm, Dmax=18.2mm
Fixing element for parallel routing of two harnesses or tubes (12.2 - 18.0mm).
Porovnat
Cable clip for hole (oval), T=0.6 - 5.0mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=12.2mm, Dmax=18.2mm
DHC12.2-18.2FTOVAL-PA66HIRHS-BK 151-02965
Porovnat
Přidat do sledovaných položek
250 pcs.
Black (BK) DHC12.2-18.2FTOVAL-PA66HIRHS-BK 151-02965
Cable clip for cable bundles/for hole (oval), T=0.6 - 5.0mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=12.2mm, Dmax=18.2mm
Fixing element for parallel routing of three harnesses or tubes (12.2 - 18.0mm).
Porovnat
Cable clip for cable bundles/for hole (oval), T=0.6 - 5.0mm, ⌀6.2 x 12.2 mm/6.5 x 12.5 mm, Dmin=12.2mm, Dmax=18.2mm
THC12.2-18.2FTOVAL-PA66HIRHS-BK 151-02967
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) THC12.2-18.2FTOVAL-PA66HIRHS-BK 151-02967
Mini cable channel, 90°, for hole (round), L=63.5mm, black, 1600pcs.
Angled mini channel provides safe routing of wires around corners or obstructions
Porovnat
Mini cable channel, 90°, for hole (round), L=63.5mm, black, 1600pcs.
90MINICHNL2-PPTD20-BK 133-01477
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
1600 pcs.
Black (BK) 90MINICHNL2-PPTD20-BK 133-01477
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for adhesive use, Wmax=5.4mm, ⌀4.0 mm, Adhesive, white, 500pcs.
Cable Tie Mounts MB and TY.
Porovnat
Cable tie mount for adhesive use, Wmax=5.4mm, ⌀4.0 mm, Adhesive, white, 500pcs.
MB4A-PA66-WH 151-28418
Porovnat
Přidat do sledovaných položek
500 pcs.
White (WH) MB4A-PA66-WH 151-28418
Braided sleeving, flame retardant/highly expandable, nom⌀40mm, ⌀32-70mm, black, 50m
Helagaine HEGPETFRX.
Porovnat
Braided sleeving, flame retardant/highly expandable, nom⌀40mm, ⌀32-70mm, black, 50m
HEGPETFRX40-PET-BK 170-81106
Porovnat
Přidat do sledovaných položek
50 metre
Black with Grey Identification Yarn (BKIDGY) HEGPETFRX40-PET-BK 170-81106
Braided sleeving, flame retardant/highly expandable, nom⌀50mm, ⌀38-76mm, black, 50m
Helagaine HEGPETFRX.
Porovnat
Braided sleeving, flame retardant/highly expandable, nom⌀50mm, ⌀38-76mm, black, 50m
HEGPETFRX50-PET-BK 170-81107
Porovnat
Přidat do sledovaných položek
50 metre
Black with Grey Identification Yarn (BKIDGY) HEGPETFRX50-PET-BK 170-81107
Cable clip
Porovnat
Cable clip
FTS5STUD5IC5X6-PA66HIRHS-BK 156-00236
Porovnat
Přidat do sledovaných položek
450 pcs.
Black (BK) FTS5STUD5IC5X6-PA66HIRHS-BK 156-00236
Cable clip
Porovnat
Cable clip
IAHC2TIC65-PA66HIRHS-BK 156-00325
Porovnat
Přidat do sledovaných položek
400 pcs.
Black (BK) IAHC2TIC65-PA66HIRHS-BK 156-00325
Cable clip
Porovnat
Cable clip
IAHC2TPION21280-PA66HIRHS-BK 156-00327
Porovnat
Přidat do sledovaných položek
400 pcs.
Black (BK) IAHC2TPION21280-PA66HIRHS-BK 156-00327
Cable clip
Porovnat
Cable clip
IC5x6P333-PA66HIRHS-BK 156-00436
Porovnat
Přidat do sledovaných položek
3000 pcs.
Black (BK) IC5x6P333-PA66HIRHS-BK 156-00436
Cable clip
Porovnat
Cable clip
IAHC5TFT6LGSTUD5-PA66HIRHS-BK 156-00458
Porovnat
Přidat do sledovaných položek
350 pcs.
Black (BK) IAHC5TFT6LGSTUD5-PA66HIRHS-BK 156-00458
WACKER® CATALYST EP is a highly-active platinum complex used for the thermal curing of addition-crosslinking silicones.
Catalyst EP in a glass bottle with 6g
Porovnat
WACKER® CATALYST EP is a highly-active platinum complex used for the thermal curing of addition-crosslinking silicones.
Catalyst EP 908-57322
Porovnat
Přidat do sledovaných položek
0.06 kg
Catalyst EP 908-57322
Heat Shrinkable Tubing 6:1 Thick Wall Adhesive Lined length 1.22m 19.0/3.2 black
HA67-19/3.
Porovnat
Heat Shrinkable Tubing 6:1 Thick Wall Adhesive Lined length 1.22m 19.0/3.2 black
HA67-19.0/3.2-PO-X-BK 321-30000
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HA67-19.0/3.2-PO-X-BK 321-30000
Heat Shrinkable Tubing 6:1 Thick Wall Adhesive Lined length 1.22m 33.0/5.5 black
HA67-33/5.
Porovnat
Heat Shrinkable Tubing 6:1 Thick Wall Adhesive Lined length 1.22m 33.0/5.5 black
HA67-33.0/5.5-PO-X-BK 321-30100
Porovnat
Přidat do sledovaných položek
3 pcs.
Black (BK) HA67-33.0/5.5-PO-X-BK 321-30100
Fixing tie for edge, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Porovnat
Fixing tie for edge, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50REC4A-PA66HS/PA6HIRHS-BK 156-02424
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50REC4A-PA66HS/PA6HIRHS-BK 156-02424
Cable tie mount for adhesive use, Wmax=5.4mm, black, 100pcs.
FlexTack FMB for round and angled surfaces
Porovnat
Cable tie mount for adhesive use, Wmax=5.4mm, black, 100pcs.
FMB4APT-A-PA66HS-BK 151-02219
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) FMB4APT-A-PA66HS-BK 151-02219
Fixing tie for screw fixation, inside serrated, black
These HDM (Heavy duty mount) are suitable for assembling on screws.
Porovnat
Fixing tie for screw fixation, inside serrated, black
T120ROSHDMP8SET-PA66HIRHS/PA66HS-BK 156-00886
Porovnat
Přidat do sledovaných položek
Black (BK) T120ROSHDMP8SET-PA66HIRHS/PA66HS-BK 156-00886
Cable tie inside serrated, 270x4.6mm, ⌀5.0-73.0mm, black, 500pcs.
Porovnat
Cable tie inside serrated, 270x4.6mm, ⌀5.0-73.0mm, black, 500pcs.
LK2A-PA66HIR-BK 111-00118
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) LK2A-PA66HIR-BK 111-00118
Grommet strip, T=3.3 - 4.8mm, W=8.4mm, W2=5.1mm, H=6.2mm, H2=4.3mm, -60 °C to +260 °C, intermittent +350 °C, natural, 3m
Flexiform - G51T - PTFE Grommet edging.
Porovnat
Grommet strip, T=3.3 - 4.8mm, W=8.4mm, W2=5.1mm, H=6.2mm, H2=4.3mm, -60 °C to +260 °C, intermittent +350 °C, natural, 3m
G51TD-PTFE-NA 251-30409
Porovnat
Přidat do sledovaných položek
1 reel
Natural (NA) G51TD-PTFE-NA 251-30409
Grommet strip, T=6.5 - 8.1mm, W=11.4mm, W2=8.3mm, H=6.8mm, H2=4.8mm, -60 °C to +260 °C, intermittent +350 °C, natural, 3m
Flexiform - G51T - PTFE Grommet edging.
Porovnat
Grommet strip, T=6.5 - 8.1mm, W=11.4mm, W2=8.3mm, H=6.8mm, H2=4.8mm, -60 °C to +260 °C, intermittent +350 °C, natural, 3m
G51TF-PTFE-NA 251-30609
Porovnat
Přidat do sledovaných položek
3 reel
Natural (NA) G51TF-PTFE-NA 251-30609
Grommet strip, T=9.7 - 12.9mm, W=16.4mm, W2=13.2mm, H=6.8mm, H2=4.8mm, -60 °C to +260 °C, intermittent +350 °C, natural, 3m
Flexiform - G51T - PTFE Grommet edging.
Porovnat
Grommet strip, T=9.7 - 12.9mm, W=16.4mm, W2=13.2mm, H=6.8mm, H2=4.8mm, -60 °C to +260 °C, intermittent +350 °C, natural, 3m
G51TH-PTFE-NA 251-30809
Porovnat
Přidat do sledovaných položek
3 reel
Natural (NA) G51TH-PTFE-NA 251-30809
Braided sleeving, abrasion resistant, nom⌀20mm, ⌀14-26mm, black, 50m
HEGP - Abrasion protection braided sleeve.
Porovnat
Braided sleeving, abrasion resistant, nom⌀20mm, ⌀14-26mm, black, 50m
HEGP20-PET-BK 170-12004
Porovnat
Přidat do sledovaných položek
50 m
Black (BK) HEGP20-PET-BK 170-12004
Braided sleeving, flame retardant/highly expandable, nom⌀30mm, ⌀19-45mm, black, 50m
Helagaine HEGPETFRX.
Porovnat
Braided sleeving, flame retardant/highly expandable, nom⌀30mm, ⌀19-45mm, black, 50m
HEGPETFRX30-PET-BK 170-81105
Porovnat
Přidat do sledovaných položek
50 metre
Black with Grey Identification Yarn (BKIDGY) HEGPETFRX30-PET-BK 170-81105
Cable clip
Porovnat
Cable clip
IPC13PFT6LGSTUD5-PA66/PA66HIRHS-BK 156-00373
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) IPC13PFT6LGSTUD5-PA66/PA66HIRHS-BK 156-00373
Metal cable clip for edge, ⌀4.1-7.0mm, T=1.5 - 2.0mm, metal, 100pcs.
Porovnat
Metal cable clip for edge, ⌀4.1-7.0mm, T=1.5 - 2.0mm, metal, 100pcs.
MSC2LP-SS304-ML 151-01699
Porovnat
Přidat do sledovaných položek
100 pcs.
Metal (ML) MSC2LP-SS304-ML 151-01699
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 515.0x12.4mm, ⌀12.0-125.0mm, black, 25pcs.
Heavy duty T-Series cable ties feature inside serrations to provide a positive hold on wire and cable bundles.
Porovnat
Cable tie inside serrated, 515.0x12.4mm, ⌀12.0-125.0mm, black, 25pcs.
T250R-PA66HIRHSUV-BK 111-24805
Porovnat
Přidat do sledovaných položek
25 pcs.
Black (BK) T250R-PA66HIRHSUV-BK 111-24805
Fixing tie for edge, inside serrated, ⌀4.0-35.0mm, black, 500pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Porovnat
Fixing tie for edge, inside serrated, ⌀4.0-35.0mm, black, 500pcs.
T30REC5B-PA66HS/PA66HIRHS-BK 156-00529
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T30REC5B-PA66HS/PA66HIRHS-BK 156-00529
Fixing tie for edge, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Porovnat
Fixing tie for edge, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50REC5A-PA66HS/PA66HIRHS-BK 156-01437
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50REC5A-PA66HS/PA66HIRHS-BK 156-01437
Fixing tie for edge, inside serrated, ⌀5.0-45.0mm, black, 100pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Porovnat
Fixing tie for edge, inside serrated, ⌀5.0-45.0mm, black, 100pcs.
T50REC21-PA66HS/PA66HIRHS-BK 156-00387
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T50REC21-PA66HS/PA66HIRHS-BK 156-00387
Fixing tie for edge, inside serrated, ⌀4.0-75.0mm, black, 500pcs.
Porovnat
Fixing tie for edge, inside serrated, ⌀4.0-75.0mm, black, 500pcs.
T30LLEC5ART-PA66HS/PA66HIRHS-BK 156-00695
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T30LLEC5ART-PA66HS/PA66HIRHS-BK 156-00695
Fixing tie for edge, inside serrated, ⌀5.0-50.0mm, black, 500pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Porovnat
Fixing tie for edge, inside serrated, ⌀5.0-50.0mm, black, 500pcs.
T50REC23-PA66HS/PA66HIRHS-BK 156-02459
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50REC23-PA66HS/PA66HIRHS-BK 156-02459
Fixing tie for hole (round), inside serrated, ⌀10.0-100.0mm, black, 200pcs.
DHDM (Double heavy duty mount) for parallel routing of bundles.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀10.0-100.0mm, black, 200pcs.
X120RDHDM6-PA66HIRHS/PA66W-BK 156-01096
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) X120RDHDM6-PA66HIRHS/PA66W-BK 156-01096
Fixing tie for hole (round), inside serrated, ⌀10.0-100.0mm, black, 200pcs.
DHDM (Double heavy duty mount) for parallel routing of bundles.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀10.0-100.0mm, black, 200pcs.
X120RDHDM8-PA66HIRHS-BK 156-01097
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) X120RDHDM8-PA66HIRHS-BK 156-01097
Cable tie mount for adhesive use, Wmax=10.0mm, ⌀4.7 mm, black, 100pcs.
SolidTack Family with special adhesive.
Porovnat
Cable tie mount for adhesive use, Wmax=10.0mm, ⌀4.7 mm, black, 100pcs.
MB5APT-A-PA66-BK 151-02247
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) MB5APT-A-PA66-BK 151-02247
Cable tie mount for adhesive use, Wmax=2.7mm, black, 100pcs.
SolidTack Family with special adhesive.
Porovnat
Cable tie mount for adhesive use, Wmax=2.7mm, black, 100pcs.
MB2APT-A-PA66-BK 151-02243
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) MB2APT-A-PA66-BK 151-02243
Heat Shrinkable Tubing 3:1 on a Reel 1.5/0.5 red
Porovnat
Heat Shrinkable Tubing 3:1 on a Reel 1.5/0.5 red
HIS-3-1.5/0.5-PO-X-RD 308-30152
Porovnat
Přidat do sledovaných položek
1 pcs.
Red (RD) HIS-3-1.5/0.5-PO-X-RD 308-30152
Heat Shrinkable Tubing 3:1 on a Reel 1.5/0.5 transparent
Porovnat
Heat Shrinkable Tubing 3:1 on a Reel 1.5/0.5 transparent
HIS-3-1.5/0.5-PO-X-CL 308-30153
Porovnat
Přidat do sledovaných položek
1 pcs.
Transparent (CL) HIS-3-1.5/0.5-PO-X-CL 308-30153
Heat Shrinkable Tubing 3:1 on a Reel 1.5/0.5 blue
Porovnat
Heat Shrinkable Tubing 3:1 on a Reel 1.5/0.5 blue
HIS-3-1.5/0.5-PO-X-BU 308-30156
Porovnat
Přidat do sledovaných položek
1 pcs.
Blue (BU) HIS-3-1.5/0.5-PO-X-BU 308-30156
Heat Shrinkable Tubing 3:1 on a Reel 3/1 red
Porovnat
Heat Shrinkable Tubing 3:1 on a Reel 3/1 red
HIS-3-3/1-PO-X-RD 308-30302
Porovnat
Přidat do sledovaných položek
1 pcs.
Red (RD) HIS-3-3/1-PO-X-RD 308-30302
Heat Shrinkable Tubing 3:1 on a Reel 3/1 transparent
Porovnat
Heat Shrinkable Tubing 3:1 on a Reel 3/1 transparent
HIS-3-3/1-PO-X-CL 308-30303
Porovnat
Přidat do sledovaných položek
1 pcs.
Transparent (CL) HIS-3-3/1-PO-X-CL 308-30303
Heat Shrinkable Tubing 3:1 on a Reel 6/2 red
Porovnat
Heat Shrinkable Tubing 3:1 on a Reel 6/2 red
HIS-3-6/2-PO-X-RD 308-30602
Porovnat
Přidat do sledovaných položek
1 pcs.
Red (RD) HIS-3-6/2-PO-X-RD 308-30602
Heat Shrinkable Tubing 3:1 on a Reel 6/2 transparent
Porovnat
Heat Shrinkable Tubing 3:1 on a Reel 6/2 transparent
HIS-3-6/2-PO-X-CL 308-30603
Porovnat
Přidat do sledovaných položek
1 pcs.
Transparent (CL) HIS-3-6/2-PO-X-CL 308-30603
Heat Shrinkable Tubing 3:1 on a Reel 9/3 transparent
Porovnat
Heat Shrinkable Tubing 3:1 on a Reel 9/3 transparent
HIS-3-9/3-PO-X-CL 308-30903
Porovnat
Přidat do sledovaných položek
1 pcs.
Transparent (CL) HIS-3-9/3-PO-X-CL 308-30903
Heat Shrinkable Tubing 3:1 on a Reel 12/4 transparent
Porovnat
Heat Shrinkable Tubing 3:1 on a Reel 12/4 transparent
HIS-3-12/4-PO-X-CL 308-31203
Porovnat
Přidat do sledovaných položek
1 pcs.
Transparent (CL) HIS-3-12/4-PO-X-CL 308-31203
Heat Shrinkable Tubing 3:1 on a Reel 18/6 red
Porovnat
Heat Shrinkable Tubing 3:1 on a Reel 18/6 red
HIS-3-18/6-PO-X-RD 308-31802
Porovnat
Přidat do sledovaných položek
1 pcs.
Red (RD) HIS-3-18/6-PO-X-RD 308-31802
Heat Shrinkable Tubing 3:1 on a Reel 18/6 transparent
Porovnat
Heat Shrinkable Tubing 3:1 on a Reel 18/6 transparent
HIS-3-18/6-PO-X-CL 308-31803
Porovnat
Přidat do sledovaných položek
1 pcs.
Transparent (CL) HIS-3-18/6-PO-X-CL 308-31803
Heat Shrinkable Tubing 3:1 on a Reel 24/8 transparent
Porovnat
Heat Shrinkable Tubing 3:1 on a Reel 24/8 transparent
HIS-3-24/8-PO-X-CL 308-32403
Porovnat
Přidat do sledovaných položek
1 pcs.
Transparent (CL) HIS-3-24/8-PO-X-CL 308-32403
Facebook  Instagram  Twitter  YouTube  LinkedIn  Corporate Blog 
Kontakt VOP Impressum Mapa stránek Newsletter Pokyny a závazky Zásady ochrany osobních údajů
Aktualizace: 14/12/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.293.4) | Aktualizace: 14/12/2025 | Nastavení ochrany osobních údajů
Hledat prodejce Kontakt