Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
21/08/2025

Výsledky pro "shipbuilding"

Nalezeno 2 711 výrobků 2 dalších položek
K dispozici jsou výsledky v následujících kategoriích:
Cable Ties and Fixings

Cable Ties and Fixings  (907)

Cable Ties Inside Serrated  (291) Cable Ties Outside Serrated  (29) Cable Ties, Releasable  (24) Cable Ties, Stainless Steel  (84) Cable Ties With Fixing Elements  (97) Cable Tie Mounts  (115) Fixing Elements  (23) Clips, Clamps and Plugs  (261)
Cable Ties and Fixings
Cable Ties and Fixings (907)
Insulation

Insulation  (578)

Heat Shrink Tubing  (444) Heat Shrinkable Moulded Shapes  (136) Insulating tubes  (3)
Insulation
Insulation (578)
Cable Protection Systems

Cable Protection Systems  (129)

Spiral-Reinforced Conduit Systems  (16) Protective Tubing and Spiral Binding  (60) Expandable Braided Sleeves  (27) Open Woven Sleeves  (52) Wiring Ducts and Accessories  (1)
Cable Protection Systems
Cable Protection Systems (129)
Electrical Installation

Electrical Installation  (201)

Wire Connectors  (21) Cable Rods  (2) Electrical Tapes  (91) Cast Resin Technology  (82) Gel Technology  (2) Chemicals  (3)
Electrical Installation
Electrical Installation (201)
Identification Systems

Identification Systems  (842)

Wire and Cable Markers  (681) Control Panel Labelling  (50) Industrial Identification  (40) RFID tags and cable ties  (56) Hazardous Area Identification  (48) Printers and Software  (19)
Identification Systems
Identification Systems (842)
Application Tooling

Application Tooling  (57)

Automatic Cable Tying System  (18) Application Tooling for Cable Ties  (20) Application Tooling for Snappers  (2) Application Tooling for Heat Shrinkable Tubing  (4) Application Tooling for Non Shrinkable Tubing  (12) Application Tooling for Braided Sleeves  (1)
Application Tooling
Application Tooling (57)
2 711 produkty
Resetovat vše
Electrical tape, L=20m, W=38mm, T=0.21mm, black, 1 pc.
HelaTape Flex 2000+ is the best choice for professional installation.
Porovnat
Electrical tape, L=20m, W=38mm, T=0.21mm, black, 1 pc.
HTAPE-FLEX2000+38x20-PVC-BK 710-10705
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) HTAPE-FLEX2000+38x20-PVC-BK 710-10705
Self amalgamating tape, L=6.7m, W=19mm, T=0.76mm, black, 1 pc.
HelaTape Power 600 is a self-amalgamating low voltage rubber tape.
Porovnat
Self amalgamating tape, L=6.7m, W=19mm, T=0.76mm, black, 1 pc.
HTAPE-POWER600-19x6.7-NR-BK 711-10200
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) HTAPE-POWER600-19x6.7-NR-BK 711-10200
Self amalgamating tape, L=1.5m, W=38mm, T=3.2mm, black, 1 pc.
HelaTape Power self-amalgamating mastic is highly flexible.
Porovnat
Self amalgamating tape, L=1.5m, W=38mm, T=3.2mm, black, 1 pc.
HTAPE-POWER650-IIR-BK 711-10300
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) HTAPE-POWER650-IIR-BK 711-10300
Self amalgamating tape, L=9.1m, W=19mm, T=0.76mm, black, 1 pc.
HelaTape Power 820 provides substantial time saving due to the linerless design.
Porovnat
Self amalgamating tape, L=9.1m, W=19mm, T=0.76mm, black, 1 pc.
HTAPE-POWER820-EPR-BK 711-10402
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) HTAPE-POWER820-EPR-BK 711-10402
Cast resin joint, Straight-through i, 3 x 1.5mm² to 5 x 6mm², L=190mm, 165 ml, Polyurethane resin (PUR) green
Straight-through joints i-Line SF (safe-filling) / Straight through joints i-A Line SF (safe-filling) – Armoured.
Porovnat
Cast resin joint, Straight-through i, 3 x 1.5mm² to 5 x 6mm², L=190mm, 165 ml, Polyurethane resin (PUR) green
i-1 / SF-PUR-GN 435-00081
Porovnat
Přidat do sledovaných položek
1 pack
Green (GN) i-1 / SF-PUR-GN 435-00081
Cast resin joint, Straight-through i, 4 x 50mm² to 4 x 150mm², L=520mm, 2 x 1450 ml, Polyurethane resin (PUR) green
Straight-through joints i-Line SF (safe-filling) / Straight through joints i-A Line SF (safe-filling) – Armoured.
Porovnat
Cast resin joint, Straight-through i, 4 x 50mm² to 4 x 150mm², L=520mm, 2 x 1450 ml, Polyurethane resin (PUR) green
i-5 / SF-PUR-GN 435-00085
Porovnat
Přidat do sledovaných položek
1 Pack
Green (GN) i-5 / SF-PUR-GN 435-00085
Cast resin joint, Straight-through i, 4 x 150mm² to 4 x 240mm², L=700mm, 4 x 1640 ml, Polyurethane resin (PUR) green
Straight-through joints i-Line SF (safe-filling) / Straight through joints i-A Line SF (safe-filling) – Armoured.
Porovnat
Cast resin joint, Straight-through i, 4 x 150mm² to 4 x 240mm², L=700mm, 4 x 1640 ml, Polyurethane resin (PUR) green
i-6 / SF-PUR-GN 435-00086
Porovnat
Přidat do sledovaných položek
1 Pack
Green (GN) i-6 / SF-PUR-GN 435-00086
Cast resin joint, Straight-through i, 3 x 1.5mm² to 5 x 10mm², L=215mm, 220 ml, Polyurethane resin (PUR) green
Straight-through joints i-Line SF (safe-filling) / Straight through joints i-A Line SF (safe-filling) – Armoured.
Porovnat
Cast resin joint, Straight-through i, 3 x 1.5mm² to 5 x 10mm², L=215mm, 220 ml, Polyurethane resin (PUR) green
i-1.5 / SF-PUR-GN 435-00088
Porovnat
Přidat do sledovaných položek
1 pack
Green (GN) i-1.5 / SF-PUR-GN 435-00088
Label, silver, thermal transfer print, 7x13mm, 1000pcs.
Helatag 1221 Series, silver panel plate labels.
Porovnat
Label, silver, thermal transfer print, 7x13mm, 1000pcs.
TAG13-07TDK1-1221-SR 596-00573
Porovnat
Přidat do sledovaných položek
1000 reel
Silver (SR) TAG13-07TDK1-1221-SR 596-00573
Label, silver, thermal transfer print, 22x22mm, 1000pcs.
Helatag 1221 Series, silver panel plate labels.
Porovnat
Label, silver, thermal transfer print, 22x22mm, 1000pcs.
TAG22-22TDK1-1221-SR 596-00574
Porovnat
Přidat do sledovaných položek
1000 reel
Silver (SR) TAG22-22TDK1-1221-SR 596-00574
Label, silver, thermal transfer print, 8x27mm, 1000pcs.
Helatag 1221 Series, silver panel plate labels.
Porovnat
Label, silver, thermal transfer print, 8x27mm, 1000pcs.
TAG27-08TDK1-1221-SR 596-00575
Porovnat
Přidat do sledovaných položek
1000 reel
Silver (SR) TAG27-08TDK1-1221-SR 596-00575
Label, silver, thermal transfer print, 15x27mm, 1000pcs.
Helatag 1221 Series, silver panel plate labels.
Porovnat
Label, silver, thermal transfer print, 15x27mm, 1000pcs.
TAG27-15TDK1-1221-SR 596-00577
Porovnat
Přidat do sledovaných položek
1000 reel
Silver (SR) TAG27-15TDK1-1221-SR 596-00577
Label, silver, thermal transfer print, 18x27mm, 1000pcs.
Helatag 1221 Series, silver panel plate labels.
Porovnat
Label, silver, thermal transfer print, 18x27mm, 1000pcs.
TAG27-18TDK1-1221-SR 596-00578
Porovnat
Přidat do sledovaných položek
1000 reel
Silver (SR) TAG27-18TDK1-1221-SR 596-00578
Label, silver, thermal transfer print, 27x27mm, 1000pcs.
Helatag 1221 Series, silver panel plate labels.
Porovnat
Label, silver, thermal transfer print, 27x27mm, 1000pcs.
TAG27-27TDK1-1221-SR 596-00579
Porovnat
Přidat do sledovaných položek
1000 reel
Silver (SR) TAG27-27TDK1-1221-SR 596-00579
Label, silver, thermal transfer print, 18x35mm, 1000pcs.
Helatag 1221 Series, silver panel plate labels.
Porovnat
Label, silver, thermal transfer print, 18x35mm, 1000pcs.
TAG35-18TDK1-1221-SR 596-00580
Porovnat
Přidat do sledovaných položek
1000 reel
Silver (SR) TAG35-18TDK1-1221-SR 596-00580
Label, silver, thermal transfer print, 15x45mm, 1000pcs.
Helatag 1221 Series, silver panel plate labels.
Porovnat
Label, silver, thermal transfer print, 15x45mm, 1000pcs.
TAG45-15TDK1-1221-SR 596-00581
Porovnat
Přidat do sledovaných položek
1000 reel
Silver (SR) TAG45-15TDK1-1221-SR 596-00581
Label, silver, thermal transfer print, 25x45mm, 1000pcs.
Helatag 1221 Series, silver panel plate labels.
Porovnat
Label, silver, thermal transfer print, 25x45mm, 1000pcs.
TAG45-25TDK1-1221-SR 596-00582
Porovnat
Přidat do sledovaných položek
1000 reel
Silver (SR) TAG45-25TDK1-1221-SR 596-00582
Label, silver, thermal transfer print, 45x90mm, 500pcs.
Helatag 1221 Series, silver panel plate labels.
Porovnat
Label, silver, thermal transfer print, 45x90mm, 500pcs.
TAG90-45TDK1-1221-SR 596-00584
Porovnat
Přidat do sledovaných položek
500 reel
Silver (SR) TAG90-45TDK1-1221-SR 596-00584
Label, silver, thermal transfer print, 30x100mm, 250pcs.
Helatag 1221 Series, silver panel plate labels.
Porovnat
Label, silver, thermal transfer print, 30x100mm, 250pcs.
TAG100-30TDK1-1221-SR 596-00585
Porovnat
Přidat do sledovaných položek
250 reel
Silver (SR) TAG100-30TDK1-1221-SR 596-00585
Woven sleeving, self closing/flame retardant, nom⌀8mm, ⌀5-8mm, -50 °C to +125 °C, black, 100m
Twist-In-FR - Flame retardant abrasion protection wrap around sleeve.
Porovnat
Woven sleeving, self closing/flame retardant, nom⌀8mm, ⌀5-8mm, -50 °C to +125 °C, black, 100m
Twist-In-FR 08-PET-BK 170-01101
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 metre
Black with White Identification Yarn (BKIDWH) Twist-In-FR 08-PET-BK 170-01101
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Woven sleeving, self closing/flame retardant, nom⌀13mm, ⌀10-13mm, -50 °C to +125 °C, black, 50m
Twist-In-FR - Flame retardant abrasion protection wrap around sleeve.
Porovnat
Woven sleeving, self closing/flame retardant, nom⌀13mm, ⌀10-13mm, -50 °C to +125 °C, black, 50m
Twist-In-FR 13-PET-BK 170-01102
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 metre
Black with White Identification Yarn (BKIDWH) Twist-In-FR 13-PET-BK 170-01102
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Woven sleeving, self closing/flame retardant, nom⌀19mm, ⌀16-19mm, -50 °C to +125 °C, black, 25m
Twist-In-FR - Flame retardant abrasion protection wrap around sleeve.
Porovnat
Woven sleeving, self closing/flame retardant, nom⌀19mm, ⌀16-19mm, -50 °C to +125 °C, black, 25m
Twist-In-FR 19-PET-BK 170-01104
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
25 metre
Black with White Identification Yarn (BKIDWH) Twist-In-FR 19-PET-BK 170-01104
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Woven sleeving, self closing/flame retardant, nom⌀25mm, ⌀19-25mm, -50 °C to +125 °C, black, 25m
Twist-In-FR - Flame retardant abrasion protection wrap around sleeve.
Porovnat
Woven sleeving, self closing/flame retardant, nom⌀25mm, ⌀19-25mm, -50 °C to +125 °C, black, 25m
Twist-In-FR 25-PET-BK 170-01105
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
25 metre
Black with White Identification Yarn (BKIDWH) Twist-In-FR 25-PET-BK 170-01105
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Woven sleeving, self closing/flame retardant, nom⌀29mm, ⌀25-29mm, -50 °C to +125 °C, black, 15m
Twist-In-FR - Flame retardant abrasion protection wrap around sleeve.
Porovnat
Woven sleeving, self closing/flame retardant, nom⌀29mm, ⌀25-29mm, -50 °C to +125 °C, black, 15m
Twist-In-FR 29-PET-BK 170-01106
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
15 metre
Black with White Identification Yarn (BKIDWH) Twist-In-FR 29-PET-BK 170-01106
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Woven sleeving, self closing/flame retardant, nom⌀32mm, ⌀29-32mm, -50 °C to +125 °C, black, 15m
Twist-In-FR - Flame retardant abrasion protection wrap around sleeve.
Porovnat
Woven sleeving, self closing/flame retardant, nom⌀32mm, ⌀29-32mm, -50 °C to +125 °C, black, 15m
Twist-In-FR 32-PET-BK 170-01107
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
15 metre
Black with White Identification Yarn (BKIDWH) Twist-In-FR 32-PET-BK 170-01107
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Woven sleeving, self closing/flame retardant, nom⌀38mm, ⌀32-38mm, -50 °C to +125 °C, black, 15m
Twist-In-FR - Flame retardant abrasion protection wrap around sleeve.
Porovnat
Woven sleeving, self closing/flame retardant, nom⌀38mm, ⌀32-38mm, -50 °C to +125 °C, black, 15m
Twist-In-FR 38-PET-BK 170-01108
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
15 metre
Black with White Identification Yarn (BKIDWH) Twist-In-FR 38-PET-BK 170-01108
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 100x2.5mm, ⌀1.5-20mm, black, 100pcs.
Porovnat
Cable tie inside serrated, 100x2.5mm, ⌀1.5-20mm, black, 100pcs.
X20R-PA66W-BK 108-00072
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) X20R-PA66W-BK 108-00072
Releasable cable tie, 180x6.5mm, ⌀12.0-46.0mm, 150N, black, 100pcs.
Porovnat
Releasable cable tie, 180x6.5mm, ⌀12.0-46.0mm, 150N, black, 100pcs.
REL180-PA66-BK 115-00027
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) REL180-PA66-BK 115-00027
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Releasable cable tie, 770x8.9mm, ⌀28.0-225mm, 670N, black, 50pcs.
Releasable and reusable cable tie, RLT-Series.
Porovnat
Releasable cable tie, 770x8.9mm, ⌀28.0-225mm, 670N, black, 50pcs.
RLT150-PA66W-BK 111-70160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) RLT150-PA66W-BK 111-70160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Releasable cable tie, 565.3x12.5mm, ⌀12.0-150.0mm, 1115N, natural, 25pcs.
Releasable cable tie features a head design with extended pawl for quick release of bundles.
Porovnat
Releasable cable tie, 565.3x12.5mm, ⌀12.0-150.0mm, 1115N, natural, 25pcs.
RT250M-PA66-NA 131-75619
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
25 pcs.
Natural (NA) RT250M-PA66-NA 131-75619
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Releasable cable tie, 515.0x12.5mm, ⌀12.0-125.0mm, 1115N, natural, 25pcs.
Releasable cable tie features a head design with extended pawl for quick release of bundles.
Porovnat
Releasable cable tie, 515.0x12.5mm, ⌀12.0-125.0mm, 1115N, natural, 25pcs.
RT250R-PA66-NA 131-75019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
25 pcs.
Natural (NA) RT250R-PA66-NA 131-75019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for screw fixation, inside serrated, ⌀1.5-32.0mm, black, 100pcs.
Screw mount style creates low insertion and high extraction force.
Porovnat
Fixing tie for screw fixation, inside serrated, ⌀1.5-32.0mm, black, 100pcs.
T50MS-PA66-BK 113-05820
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T50MS-PA66-BK 113-05820
Heat Shrinkable Tubing 2:1 VG-Norm 38.0/19.0 green/yellow
TFN21 - available in a wide range of colours and sizes.
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 38.0/19.0 green/yellow
HFT-A-38.0/19.0-PO-X-GNYE 305-38145
Porovnat
Přidat do sledovaných položek
50 metre
Green-Yellow (GNYE) HFT-A-38.0/19.0-PO-X-GNYE 305-38145
Heat Shrinkable Tubing 2:1 (4.8/2.4) black
Porovnat
Heat Shrinkable Tubing 2:1 (4.8/2.4) black
PST-H-4.8/2.4-POA-BK 342-20480
Porovnat
Přidat do sledovaných položek
300 metre
Black (BK) PST-H-4.8/2.4-POA-BK 342-20480
Heat Shrinkable Tubing 2:1 (9.5/4.8) black
Porovnat
Heat Shrinkable Tubing 2:1 (9.5/4.8) black
PST-H-9.5/4.8-POA-BK 342-20950
Porovnat
Přidat do sledovaných položek
150 metre
Black (BK) PST-H-9.5/4.8-POA-BK 342-20950
Heat Shrinkable Tubing 2:1 (6.4/3.2) black
Porovnat
Heat Shrinkable Tubing 2:1 (6.4/3.2) black
PST-H-6.4/3.2-POA-BK 342-20640
Porovnat
Přidat do sledovaných položek
300 metre
Black (BK) PST-H-6.4/3.2-POA-BK 342-20640
Heat Shrinkable Tubing 2:1 (19/9.5) black
Porovnat
Heat Shrinkable Tubing 2:1 (19/9.5) black
PST-H-19.0/9.5-POA-BK 342-21900
Porovnat
Přidat do sledovaných položek
50 metre
Black (BK) PST-H-19.0/9.5-POA-BK 342-21900
Heat Shrinkable Tubing 2:1 (12.7/6.4) black
Porovnat
Heat Shrinkable Tubing 2:1 (12.7/6.4) black
PST-H-12.7/6.4-POA-BK 342-21270
Porovnat
Přidat do sledovaných položek
100 metre
Black (BK) PST-H-12.7/6.4-POA-BK 342-21270
Heat Shrinkable Tubing 2:1 (25.4/12.7) black
Porovnat
Heat Shrinkable Tubing 2:1 (25.4/12.7) black
PST-H-25.4/12.7-POA-BK 342-22540
Porovnat
Přidat do sledovaných položek
50 metre
Black (BK) PST-H-25.4/12.7-POA-BK 342-22540
Heat Shrinkable Tubing 2:1 (38/19) black
Porovnat
Heat Shrinkable Tubing 2:1 (38/19) black
PST-H-38.0-19.0-POA-BK 342-23810
Porovnat
Přidat do sledovaných položek
30 metre
Black (BK) PST-H-38.0-19.0-POA-BK 342-23810
Heat Shrinkable Tubing 2:1 flexible 1.6/0.8 transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible 1.6/0.8 transparent
TF24-1.6/0.8-PO-X-CL 309-40163
Porovnat
Přidat do sledovaných položek
100 metre
Transparent (CL) TF24-1.6/0.8-PO-X-CL 309-40163
Heat Shrinkable Tubing 2:1 flexible 2.4/1.2 transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible 2.4/1.2 transparent
TF24-2.4/1.2-PO-X-CL 309-40243
Porovnat
Přidat do sledovaných položek
100 metre
Transparent (CL) TF24-2.4/1.2-PO-X-CL 309-40243
Heat Shrinkable Tubing 2:1 flexible 4.8/2.4 transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible 4.8/2.4 transparent
TF24-4.8/2.4-PO-X-CL 309-50483
Porovnat
Přidat do sledovaných položek
60 metre
Transparent (CL) TF24-4.8/2.4-PO-X-CL 309-50483
Heat Shrinkable Tubing 2:1 flexible 19.0/9.5 transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible 19.0/9.5 transparent
TF24-19.1/9.5-PO-X-CL 309-31903
Porovnat
Přidat do sledovaných položek
50 metre
Transparent (CL) TF24-19.1/9.5-PO-X-CL 309-31903
Heat Shrinkable Tubing 2:1 flexible 25.4/12.7 transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible 25.4/12.7 transparent
TF24-25.4/12.7-PO-X-CL 309-32543
Porovnat
Přidat do sledovaných položek
50 metre
Transparent (CL) TF24-25.4/12.7-PO-X-CL 309-32543
Heat Shrinkable Tubing 2:1 flexible 38.0/19.5 transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible 38.0/19.5 transparent
TF24-38.1/19.1-PO-X-CL 309-33813
Porovnat
Přidat do sledovaných položek
60 metre
Transparent (CL) TF24-38.1/19.1-PO-X-CL 309-33813
Heat Shrinkable Tubing 2:1 flexible 50.8/25.4 transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible 50.8/25.4 transparent
TF24-50.8/25.4-PO-X-CL 309-35083
Porovnat
Přidat do sledovaných položek
60 metre
Transparent (CL) TF24-50.8/25.4-PO-X-CL 309-35083
Fluoroelastomer Heat Shrinkable Tubing 2:1 3.2/1.6 black
Viton®-E for flexibility and protection against aggressive chemicals.
Porovnat
Fluoroelastomer Heat Shrinkable Tubing 2:1 3.2/1.6 black
VITON®-E-3.2/1.6-FPMX-BK 330-00320
Porovnat
Přidat do sledovaných položek
50 metre
Black (BK) VITON®-E-3.2/1.6-FPMX-BK 330-00320
Fluoroelastomer Heat Shrinkable Tubing 2:1 9.5/4.8 black
Viton®-E for flexibility and protection against aggressive chemicals.
Porovnat
Fluoroelastomer Heat Shrinkable Tubing 2:1 9.5/4.8 black
VITON®-E-9.5/4.8-FPMX-BK 330-00950
Porovnat
Přidat do sledovaných položek
25 metre
Black (BK) VITON®-E-9.5/4.8-FPMX-BK 330-00950
Fluoroelastomer Heat Shrinkable Tubing 2:1 25.4/12.7 black
Viton®-E for flexibility and protection against aggressive chemicals.
Porovnat
Fluoroelastomer Heat Shrinkable Tubing 2:1 25.4/12.7 black
VITON®-E-25.4/12.7-FPMX-BK 330-02540
Porovnat
Přidat do sledovaných položek
25 metre
Black (BK) VITON®-E-25.4/12.7-FPMX-BK 330-02540
Fluoroelastomer Heat Shrinkable Tubing 2:1 38.0/19.0 black
Viton®-E for flexibility and protection against aggressive chemicals.
Porovnat
Fluoroelastomer Heat Shrinkable Tubing 2:1 38.0/19.0 black
VITON®-E-38.0/19.0-FPMX-BK 330-03810
Porovnat
Přidat do sledovaných položek
15 metre
Black (BK) VITON®-E-38.0/19.0-FPMX-BK 330-03810
Heat Shrinkable Tubing 3:1 PO-X 1 m Lengths Thin Wall 1.5/0.5 green-yellow
TFN21 - available in a wide range of colours and sizes.
Porovnat
Heat Shrinkable Tubing 3:1 PO-X 1 m Lengths Thin Wall 1.5/0.5 green-yellow
TREDUX-1.5/0.5-PO-X-GNYE 319-00157
Porovnat
Přidat do sledovaných položek
20 metre
Green-Yellow (GNYE) TREDUX-1.5/0.5-PO-X-GNYE 319-00157
Heat Shrinkable Tubing 2:1 length 1 m Thin Wall 38.1/19.1 green/yellow
TFN21 - available in a wide range of colours and sizes.
Porovnat
Heat Shrinkable Tubing 2:1 length 1 m Thin Wall 38.1/19.1 green/yellow
TREDUX-38.1/19.1-PO-X-GNYE 319-03807
Porovnat
Přidat do sledovaných položek
6 metre
Green-Yellow (GNYE) TREDUX-38.1/19.1-PO-X-GNYE 319-03807
Heat Shrinkable Tubing 3:1 PO-X 1 m Lengths Thin Wall 101.6/50.8 black
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 3:1 PO-X 1 m Lengths Thin Wall 101.6/50.8 black
TREDUX-101.6/50.8-PO-X-BK 319-10200
Porovnat
Přidat do sledovaných položek
1 metre
Black (BK) TREDUX-101.6/50.8-PO-X-BK 319-10200
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-2.4/1.2-PO-X-CL 305-02419
Porovnat
Přidat do sledovaných položek
100 m
Transparent (CL) HFT-B-2.4/1.2-PO-X-CL 305-02419
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-19.0/9.5-PO-X-CL 305-19019
Porovnat
Přidat do sledovaných položek
50 metre
Transparent (CL) HFT-B-19.0/9.5-PO-X-CL 305-19019
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-25.4/12.7-PO-X-CL 305-25419
Porovnat
Přidat do sledovaných položek
25 m
Transparent (CL) HFT-B-25.4/12.7-PO-X-CL 305-25419
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-38.0/19.0-PO-X-CL 305-38119
Porovnat
Přidat do sledovaných položek
50 m
Transparent (CL) HFT-B-38.0/19.0-PO-X-CL 305-38119
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-1.6/0.8-PO-X-CL 305-01619
Porovnat
Přidat do sledovaných položek
100 m
Transparent (CL) HFT-B-1.6/0.8-PO-X-CL 305-01619
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-3.2/1.6-PO-X-CL 305-03219
Porovnat
Přidat do sledovaných položek
100 m
Transparent (CL) HFT-B-3.2/1.6-PO-X-CL 305-03219
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-4.8/2.4-PO-X-CL 305-04819
Porovnat
Přidat do sledovaných položek
300 metre
Transparent (CL) HFT-B-4.8/2.4-PO-X-CL 305-04819
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-12.7/6.4-PO-X-CL 305-12719
Porovnat
Přidat do sledovaných položek
50 m
Transparent (CL) HFT-B-12.7/6.4-PO-X-CL 305-12719
Heat shrinkable tubing 2:1 (1.2/0.6 mm), self extinguishing, black, 300 m reel
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat shrinkable tubing 2:1 (1.2/0.6 mm), self extinguishing, black, 300 m reel
TCN20-1.2/0.6-PO-X-BK 300-73010
Porovnat
Přidat do sledovaných položek
300 metre
Black (BK) TCN20-1.2/0.6-PO-X-BK 300-73010
Heat shrinkable tubing 2:1 (50.8/25.4 mm), self extinguishing, black, 30 m reel
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat shrinkable tubing 2:1 (50.8/25.4 mm), self extinguishing, black, 30 m reel
TCN20-50.8/25.4-PO-X-BK 300-73120
Porovnat
Přidat do sledovaných položek
30 metre
Black (BK) TCN20-50.8/25.4-PO-X-BK 300-73120
Heat shrinkable tubing 2:1 (12.7/4.8 mm), self extinguishing and overexpanded, black, 100 m reel
TCN20 Overexpanded - reliable insulation with an enhanced shrink ratio.
Porovnat
Heat shrinkable tubing 2:1 (12.7/4.8 mm), self extinguishing and overexpanded, black, 100 m reel
TCN20-12.7/4.8-PO-X-BK 300-73180
Porovnat
Přidat do sledovaných položek
100 metre
Black (BK) TCN20-12.7/4.8-PO-X-BK 300-73180
Heat shrinkable tubing 2:1 (19.0/6.4 mm), self extinguishing and overexpanded, black, 60 m reel
TCN20 Overexpanded - reliable insulation with an enhanced shrink ratio.
Porovnat
Heat shrinkable tubing 2:1 (19.0/6.4 mm), self extinguishing and overexpanded, black, 60 m reel
TCN20-19.0/6.4-PO-X-BK 300-73190
Porovnat
Přidat do sledovaných položek
60 metre
Black (BK) TCN20-19.0/6.4-PO-X-BK 300-73190
Cable clip for adhesive use/with pipe/tube holder, Dmax=18.0mm
Self adhesive one piece fixing clips RA- & RB-Series.
Porovnat
Cable clip for adhesive use/with pipe/tube holder, Dmax=18.0mm
RA18-PA66-NA 151-13119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) RA18-PA66-NA 151-13119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for adhesive use/with pipe/tube holder, Dmax=3.0mm
Self adhesive one piece fixing clips RA- & RB-Series.
Porovnat
Cable clip for adhesive use/with pipe/tube holder, Dmax=3.0mm
RA3-PA66-NA 151-13018
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) RA3-PA66-NA 151-13018
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for adhesive use/with pipe/tube holder, Dmin=14.0mm, Dmax=14.0mm
RB14 self-adhesive clip for a quick and easy installation.
Porovnat
Cable clip for adhesive use/with pipe/tube holder, Dmin=14.0mm, Dmax=14.0mm
RB14-PA66-BK 151-00502
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) RB14-PA66-BK 151-00502
P-clamp closed, Dmax=19.0mm, ⌀4.2 mm, natural, 1000pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=19.0mm, ⌀4.2 mm, natural, 1000pcs.
H11P-PA66-NA 211-60119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) H11P-PA66-NA 211-60119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=22.0mm, ⌀5.2 mm, natural, 500pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=22.0mm, ⌀5.2 mm, natural, 500pcs.
H13P-PA66-NA 211-60139
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
500 pcs.
Natural (NA) H13P-PA66-NA 211-60139
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=24.0mm, ⌀5.2 mm, natural, 500pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=24.0mm, ⌀5.2 mm, natural, 500pcs.
H14P-PA66-NA 211-60149
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
500 pcs.
Natural (NA) H14P-PA66-NA 211-60149
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=25.5mm, ⌀5.2 mm, natural, 500pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=25.5mm, ⌀5.2 mm, natural, 500pcs.
H15P-PA66-NA 211-60159
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
500 pcs.
Natural (NA) H15P-PA66-NA 211-60159
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=28.5mm, ⌀5.2 mm, natural, 500pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=28.5mm, ⌀5.2 mm, natural, 500pcs.
H16P-PA66-NA 211-60169
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
500 pcs.
Natural (NA) H16P-PA66-NA 211-60169
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=31.5mm, ⌀5.2 mm, natural, 250pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=31.5mm, ⌀5.2 mm, natural, 250pcs.
H17P-PA66-NA 211-60179
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
250 pcs.
Natural (NA) H17P-PA66-NA 211-60179
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=35.0mm, ⌀5.2 mm, natural, 250pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=35.0mm, ⌀5.2 mm, natural, 250pcs.
H18P-PA66-NA 211-60189
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
250 pcs.
Natural (NA) H18P-PA66-NA 211-60189
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Porovnat
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, black, 100pcs.
H3P-PA66HS-BK 211-60002
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) H3P-PA66HS-BK 211-60002
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Porovnat
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 100pcs.
H4P-PA66HS-BK 211-60003
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) H4P-PA66HS-BK 211-60003
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.
P-Clamps H1P - H18P in different dimensions.
Porovnat
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, black, 100pcs.
H5P-PA66HS-BK 211-60004
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) H5P-PA66HS-BK 211-60004
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 100pcs.
Designed with radiused edges to prevent chafing and cutting into insulation.
Porovnat
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 100pcs.
H6P-PA66HS-BK 211-60005
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) H6P-PA66HS-BK 211-60005
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C P-Clamp with chloroprene insert.
Porovnat
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<BR>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie inside serrated, 300x7.6mm, ⌀5.0-80.0mm, natural, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 300x7.6mm, ⌀5.0-80.0mm, natural, 100pcs.
T120I-PA66-NA 111-12219
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) T120I-PA66-NA 111-12219
Cable tie inside serrated, 300x7.6mm, ⌀4.8-80.0mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 300x7.6mm, ⌀4.8-80.0mm, black, 100pcs.
T120I-PA66HIR(S)-BK 111-12203
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T120I-PA66HIR(S)-BK 111-12203
Cable tie inside serrated, 760.0x7.6mm, ⌀5.0-225mm, black, 50pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Cable tie inside serrated, 760.0x7.6mm, ⌀5.0-225mm, black, 50pcs.
T120L-PA66-BK 111-12403
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) T120L-PA66-BK 111-12403
Facebook  Instagram  Twitter  YouTube  LinkedIn  Corporate Blog 
Kontakt VOP Impressum Mapa stránek Newsletter Pokyny a závazky Zásady ochrany osobních údajů
Aktualizace: 17/08/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.284) | Aktualizace: 17/08/2025 | Nastavení ochrany osobních údajů
Hledat prodejce Kontakt