18/08/2026

Výsledky pro "D-Clip Series" v Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Poznámka:  Kombinace hledaných výrazů nevrátila žádné odpovídající výsledky.  Níže jsou výsledky, které odpovídají dílům dle Vašeho vyhledávání.

Typ: Zkuste změnit nebo odstranit výrazy, abyste zlepšili relevanci výsledků vyhledávání.

1 947 produkty
Resetovat vše
Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 1000pcs.
These HDM (Heavy duty mount) are suitable for assembling on screws.
Porovnat
KR8/33HDMP6SET-PA66W/PA66GF15-BK 156-02483
Porovnat
Přidat do sledovaných položek
These HDM (Heavy duty mount) are suitable for assembling on screws.
Porovnat
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) KR8/33HDMP6SET-PA66W/PA66GF15-BK 156-02483
Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 1000pcs.
These HDM (Heavy duty mount) are suitable for assembling on screws.
Porovnat
KR8/33HDMP8SET-PA66W/PA66GF15-BK 156-02484
Porovnat
Přidat do sledovaných položek
These HDM (Heavy duty mount) are suitable for assembling on screws.
Porovnat
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) KR8/33HDMP8SET-PA66W/PA66GF15-BK 156-02484
Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 500pcs.
DHDM (Double heavy duty mount) for parallel routing of bundles.
Porovnat
KR8/33DHDM6SET-PA66W/PA66GF15-BK 156-02485
Porovnat
Přidat do sledovaných položek
DHDM (Double heavy duty mount) for parallel routing of bundles.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) KR8/33DHDM6SET-PA66W/PA66GF15-BK 156-02485
Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 500pcs.
DHDM (Double heavy duty mount) for parallel routing of bundles.
Porovnat
KR8/33DHDM8SET-PA66W/PA66GF15-BK 156-02486
Porovnat
Přidat do sledovaných položek
DHDM (Double heavy duty mount) for parallel routing of bundles.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) KR8/33DHDM8SET-PA66W/PA66GF15-BK 156-02486
Cable tie outside serrated for direct fixation, 270.0x12.7mm, ⌀70.0mm, black, 500pcs.
The 1-piece design of Aerial Support Ties reduces installation time.
Porovnat
TAS120M-PA66HIRHSUV-BK 111-01671
Porovnat
Přidat do sledovaných položek
The 1-piece design of Aerial Support Ties reduces installation time.
Porovnat
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) TAS120M-PA66HIRHSUV-BK 111-01671
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.0 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.
Positions bundles off cross members and frame rails to prevent abrasion and chafing.
Porovnat
SAOM82-PA66HIRHSUV-BK 151-29701
Porovnat
Přidat do sledovaných položek
Positions bundles off cross members and frame rails to prevent abrasion and chafing.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) SAOM82-PA66HIRHSUV-BK 151-29701
Cable tie inside serrated, 100.0x2.5mm, ⌀1.5-22mm, black, 100pcs.
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
T18R-PA66W-BK 111-01960
Porovnat
Přidat do sledovaných položek
The Allrounder: T-Series cable ties can be used for almost any type of application.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T18R-PA66W-BK 111-01960
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
1-Piece Fixing Tie with EdgeClip for parallel cable routing to the edge.
Porovnat
T50SOSEC34E-PA66HS-BK 126-00426
Porovnat
Přidat do sledovaných položek
1-Piece Fixing Tie with EdgeClip for parallel cable routing to the edge.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SOSEC34E-PA66HS-BK 126-00426
Fixing tie for edge, outside serrated, ⌀1.5-30.0mm, black/silver, 1000pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Porovnat
S50SOSEC1.5-4TVE-PP/C75S-BK/SR 126-00465
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK), Silver (SR) S50SOSEC1.5-4TVE-PP/C75S-BK/SR 126-00465
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Fixing tie for edge, outside serrated, ⌀1.5-30.0mm, black/silver, 1000pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Porovnat
S50SOSEC1.5-4.0SVE-PP/C75S-BK/SR 126-00471
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK), Silver (SR) S50SOSEC1.5-4.0SVE-PP/C75S-BK/SR 126-00471
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
Fixing tie with EdgeClip for bundling cables above and parlell to the edge.
Porovnat
T50ROSEC10-PA66HS/PA66HIRHS-BK 156-05904
Porovnat
Přidat do sledovaných položek
Fixing tie with EdgeClip for bundling cables above and parlell to the edge.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROSEC10-PA66HS/PA66HIRHS-BK 156-05904
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
ALU10-AL-NA 211-10100
Porovnat
Přidat do sledovaných položek
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU10-AL-NA 211-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU11C-AL/CR-BK 211-15110
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU11C-AL/CR-BK 211-15110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU13C-AL/CR-BK 211-15130
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU13C-AL/CR-BK 211-15130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU14C-AL/CR-BK 211-15140
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU14C-AL/CR-BK 211-15140
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU16C-AL/CR-BK 211-15160
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU16C-AL/CR-BK 211-15160
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU18C-AL/CR-BK 211-15180
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU18C-AL/CR-BK 211-15180
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU20C-AL/CR-BK 211-15200
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU22C-AL/CR-BK 211-15220
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU24C-AL/CR-BK 211-15240
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
ALU4-AL-NA 211-10040
Porovnat
Přidat do sledovaných položek
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU4-AL-NA 211-10040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU4C-AL/CR-BK 211-15040
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU4C-AL/CR-BK 211-15040
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
ALU5-AL-NA 211-10050
Porovnat
Přidat do sledovaných položek
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU5-AL-NA 211-10050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU5C-AL/CR-BK 211-15050
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU5C-AL/CR-BK 211-15050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
ALU7-AL-NA 211-10070
Porovnat
Přidat do sledovaných položek
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU7-AL-NA 211-10070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
ALU6-AL-NA 211-10060
Porovnat
Přidat do sledovaných položek
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU6-AL-NA 211-10060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Connector clip for hole (oval), EWCAP-005-11, black, 5000pcs.
Oval fir tree ensures a tight connection without rotation.
Porovnat
CC11-PA66HIRHSUV-BK 151-01144
Porovnat
Přidat do sledovaných položek
Oval fir tree ensures a tight connection without rotation.
Porovnat
Porovnat
Přidat do sledovaných položek
5000 pcs.
Black (BK) CC11-PA66HIRHSUV-BK 151-01144
Connector clip, EWCAP-005-11, black, 5000pcs.
Oval fir tree ensures a tight connection without rotation.
Porovnat
CC16-PA66HIRHSUV-BK 151-01297
Porovnat
Přidat do sledovaných položek
Oval fir tree ensures a tight connection without rotation.
Porovnat
Porovnat
Přidat do sledovaných položek
5000 pcs.
Black (BK) CC16-PA66HIRHSUV-BK 151-01297
Connector clip for edge, EWCAP-005-11, black, 1000pcs.
Connector clip attaches to surfaces with edge clip.
Porovnat
CCEC6-PA66HIRHS-BK 150-92600
Porovnat
Přidat do sledovaných položek
Connector clip attaches to surfaces with edge clip.
Porovnat
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) CCEC6-PA66HIRHS-BK 150-92600
Connector clip for edge/for connector, black, 60pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Designed to securely hold an MC4 or MC4 EVO2 with an outer diameter of 21.5 mm and a maximum length of 122.0 mm.
Porovnat
SPC-DEC1-3SP-PA66HSUV/C75S-BK 151-04425
Porovnat
Přidat do sledovaných položek
Designed to securely hold an MC4 or MC4 EVO2 with an outer diameter of 21.5 mm and a maximum length of 122.0 mm.
Porovnat
Porovnat
Přidat do sledovaných položek
60 pcs.
Black (BK) SPC-DEC1-3SP-PA66HSUV/C75S-BK 151-04425
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Bundling clip for hole (round), L=27.3mm, black, 20000pcs.
Porovnat
BCOWFT6M-PA66HIRHS-BK 151-02226
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
20000 pcs.
Black (BK) BCOWFT6M-PA66HIRHS-BK 151-02226
Bundling clip for hole (round), L=27.3mm, natural, 20000pcs.
BCOWFT6M
Porovnat
BCOWFT6M-PA66HIRHS-NA 151-02227
Porovnat
Přidat do sledovaných položek
BCOWFT6M
Porovnat
Porovnat
Přidat do sledovaných položek
20000 pcs.
Natural (NA) BCOWFT6M-PA66HIRHS-NA 151-02227
Releasable cable tie, 880x28.0mm, ⌀240mm, 360N, black, 180pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
The elasticity of the SOFTIX ties makes them suitable for use in many applications.
Porovnat
SRT88028-TPU-BK 115-28889
Porovnat
Přidat do sledovaných položek
The elasticity of the SOFTIX ties makes them suitable for use in many applications.
Porovnat
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) SRT88028-TPU-BK 115-28889
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, inside serrated, ⌀3.0-40.0mm, grey, 500pcs.
SBR8S for M8 threaded studs.
Porovnat
SBR8S-PA46-GY 131-60058
Porovnat
Přidat do sledovaných položek
SBR8S for M8 threaded studs.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Grey (GY) SBR8S-PA46-GY 131-60058
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
Porovnat
T50SOSSBD-M8-PA66HSW-BK 157-00039
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T50SOSSBD-M8-PA66HSW-BK 157-00039
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
Porovnat
T50SOSSBU-M8-PA66HSW-GY 157-00066
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Grey (GY) T50SOSSBU-M8-PA66HSW-GY 157-00066
Fixing tie for screw fixation, inside serrated, ⌀3.0-100.0mm, natural, 100pcs.
Screw mount style creates low insertion and high extraction force.
Porovnat
T50ML-PA66-NA 113-05419
Porovnat
Přidat do sledovaných položek
Screw mount style creates low insertion and high extraction force.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) T50ML-PA66-NA 113-05419
Fixing tie for screw fixation, inside serrated, ⌀1.5-32.0mm, natural, 100pcs.
Screw mount style creates low insertion and high extraction force.
Porovnat
T50MS-PA66-NA 113-05819
Porovnat
Přidat do sledovaných položek
Screw mount style creates low insertion and high extraction force.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) T50MS-PA66-NA 113-05819
Fixing tie for screw fixation, inside serrated, ⌀1.5-32.0mm, black, 100pcs.
Screw mount style creates low insertion and high extraction force.
Porovnat
T50MS-PA66-BK 113-05820
Porovnat
Přidat do sledovaných položek
Screw mount style creates low insertion and high extraction force.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T50MS-PA66-BK 113-05820
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, black, 1000pcs.
The low-profile push mount design provides an overall shortened length, which assists in limiting protrusion on the opposing side of application surfaces.
Porovnat
T50SOSKSFT5S-E-PA66HS-BK 126-00099
Porovnat
Přidat do sledovaných položek
The low-profile push mount design provides an overall shortened length, which assists in limiting protrusion on the opposing side of application surfaces.
Porovnat
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) T50SOSKSFT5S-E-PA66HS-BK 126-00099
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, natural, 1000pcs.
1-Piece Fixing Tie for round holes with disc and flat arrow head.
Porovnat
T50SOSKSFT5S-E-PA66HS-NA 126-00111
Porovnat
Přidat do sledovaných položek
1-Piece Fixing Tie for round holes with disc and flat arrow head.
Porovnat
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) T50SOSKSFT5S-E-PA66HS-NA 126-00111
Fixing tie for hole (round), outside serrated, ⌀1.5-30.0mm, natural, 500pcs.
1-piece fixing tie with arrowhead for round holes sealed.
Porovnat
T50SOSSFT6.5E-MDL-PA66HS-NA 156-00271
Porovnat
Přidat do sledovaných položek
1-piece fixing tie with arrowhead for round holes sealed.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Natural (NA) T50SOSSFT6.5E-MDL-PA66HS-NA 156-00271
Fixing tie for hole (round), inside serrated, ⌀1.5-16.0mm, natural, 100pcs.
Inside serrated T18RSF for round hole fixing and combined with cable tie fixing function.
Porovnat
T18RSF-PA66HS-NA 126-00416
Porovnat
Přidat do sledovaných položek
Inside serrated T18RSF for round hole fixing and combined with cable tie fixing function.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) T18RSF-PA66HS-NA 126-00416
Fixing tie for hole (round), inside serrated, ⌀1.5-35.0mm, natural, 1000pcs.
Fixing tie for round holes.
Porovnat
T50SSFM-PA66-NA 111-85739
Porovnat
Přidat do sledovaných položek
Fixing tie for round holes.
Porovnat
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) T50SSFM-PA66-NA 111-85739
Fixing tie for hole (round), inside serrated, ⌀1.6-25.0mm, natural, 1000pcs.
Fixing tie with stand-off for round holes and with arrowhead.
Porovnat
T50SAH-PA66HS-NA 155-41102
Porovnat
Přidat do sledovaných položek
Fixing tie with stand-off for round holes and with arrowhead.
Porovnat
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) T50SAH-PA66HS-NA 155-41102
Fixing tie for hole (oval), inside serrated, ⌀1.5-45.0mm, black, 1000pcs.
1-Piece Fixing Tie for round holes with wings.
Porovnat
T80RFT6X12-PA66-BK 150-48396
Porovnat
Přidat do sledovaných položek
1-Piece Fixing Tie for round holes with wings.
Porovnat
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) T80RFT6X12-PA66-BK 150-48396
Fixing tie for hole (round), inside serrated, ⌀1.6-32mm, natural, 500pcs.
Porovnat
T30RSF-PA66-NA 126-00330
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Natural (NA) T30RSF-PA66-NA 126-00330
Fixing tie for hole (round), inside serrated, ⌀1.6-32mm, black, 500pcs.
Fixing tie for round holes with Arrowhead.
Porovnat
T30RSF-PA66HS-BK 126-00329
Porovnat
Přidat do sledovaných položek
Fixing tie for round holes with Arrowhead.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T30RSF-PA66HS-BK 126-00329
Fixing tie for hole (round), ⌀1.0-27.0mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
RT18RSF-PA66-NA 115-01900
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) RT18RSF-PA66-NA 115-01900
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Porovnat
T50ROSFT6SO25A-PA66HIRHSUV-BK 157-00150
Porovnat
Přidat do sledovaných položek
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROSFT6SO25A-PA66HIRHSUV-BK 157-00150
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, grey, 4000pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Porovnat
T50ROSFT6SO12.5A-PA66HIRHS-GY 157-00130
Porovnat
Přidat do sledovaných položek
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Porovnat
Porovnat
Přidat do sledovaných položek
4000 pcs.
Grey (GY) T50ROSFT6SO12.5A-PA66HIRHS-GY 157-00130
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Porovnat
T50ROSFT6SO12.5B-PA66HIRHSUV-BK 157-00171
Porovnat
Přidat do sledovaných položek
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROSFT6SO12.5B-PA66HIRHSUV-BK 157-00171
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, grey, 1000pcs.
1-piece fixing tie, made out of PA46 with fir tree for a round hole.
Porovnat
T50SOSFT6E1-PA46-GY 157-00059
Porovnat
Přidat do sledovaných položek
1-piece fixing tie, made out of PA46 with fir tree for a round hole.
Porovnat
Porovnat
Přidat do sledovaných položek
1000 pcs.
Grey (GY) T50SOSFT6E1-PA46-GY 157-00059
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, natural, 5000pcs.
Porovnat
T50SOSFT6E1-PA66HIRHS-NA 157-00058
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
5000 pcs.
Natural (NA) T50SOSFT6E1-PA66HIRHS-NA 157-00058
Fixing tie for hole (round), outside serrated, ⌀1.0-35.0mm, grey, 1000pcs.
1-piece fixing tie, made out of PA46 with fir tree for a round hole.
Porovnat
T50SOSFT8E-PA46-GY 157-00115
Porovnat
Přidat do sledovaných položek
1-piece fixing tie, made out of PA46 with fir tree for a round hole.
Porovnat
Porovnat
Přidat do sledovaných položek
1000 pcs.
Grey (GY) T50SOSFT8E-PA46-GY 157-00115
Fixing tie for cable bundles/with pipe/tube holder, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
Reusable clip with Cable tie for multiple bundling of cables in different directions and suitable for pre-installation and replacement in case of maintenance.
Porovnat
T50ROC1A-PA66HS/PA66HIRHS-BK 156-00036
Porovnat
Přidat do sledovaných položek
Reusable clip with Cable tie for multiple bundling of cables in different directions and suitable for pre-installation and replacement in case of maintenance.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROC1A-PA66HS/PA66HIRHS-BK 156-00036
Fixing tie with pipe/tube holder, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Porovnat
T50ROC1B-PA66HS/PA66HIRHS-BK 156-00306
Porovnat
Přidat do sledovaných položek
Bundle can rotate to any orientation, allowing routing in any direction regardless of mounting point.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROC1B-PA66HS/PA66HIRHS-BK 156-00306
Fixing tie for stud, outside serrated, ⌀4.0-31.0mm, black, 500pcs.
2-piece fixing tie for stud bolts 5mm.
Porovnat
T50SOSSBS5-PA66HS/PA66-BK 156-00079
Porovnat
Přidat do sledovaných položek
2-piece fixing tie for stud bolts 5mm.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SOSSBS5-PA66HS/PA66-BK 156-00079
Fixing tie for stud, outside serrated, ⌀2.0-35.0mm, black, 500pcs.
Two-piece cable tie with weld stud fastener is ideal for installation onto the stud prior to attaching the cable.
Porovnat
T50SOSSB5-PA66HS/POM-BK 156-00080
Porovnat
Přidat do sledovaných položek
Two-piece cable tie with weld stud fastener is ideal for installation onto the stud prior to attaching the cable.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SOSSB5-PA66HS/POM-BK 156-00080
Fixing tie for hole (round), inside serrated, ⌀1-45.0mm, grey, 1000pcs.
T50RDHA5.5x15-PA46 for blind hole applications and with higher temperature requirements.
Porovnat
T50RDHA5.5x15-PA46-GY 156-01203
Porovnat
Přidat do sledovaných položek
T50RDHA5.5x15-PA46 for blind hole applications and with higher temperature requirements.
Porovnat
Porovnat
Přidat do sledovaných položek
1000 pcs.
Grey (GY) T50RDHA5.5x15-PA46-GY 156-01203
Fixing tie for edge, inside serrated, ⌀5.0-50.0mm, black, 500pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Porovnat
T50REC23-PA66HS/PA66HIRHS-BK 156-02459
Porovnat
Přidat do sledovaných položek
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50REC23-PA66HS/PA66HIRHS-BK 156-02459
Fixing tie for hole (round), inside serrated, ⌀1.0-40.0mm, black, 500pcs.
Porovnat
T40RFT8GSD-PA66HS/PA66HIRHS-BK 156-00104
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T40RFT8GSD-PA66HS/PA66HIRHS-BK 156-00104
Fixing tie for hole (round), inside serrated, ⌀1.0-45.0mm, grey, 1000pcs.
2-piece Fixing tie for round holes made from PA46.
Porovnat
T50RFT8GSD-PA46-GY 156-00235
Porovnat
Přidat do sledovaných položek
2-piece Fixing tie for round holes made from PA46.
Porovnat
Porovnat
Přidat do sledovaných položek
1000 pcs.
Grey (GY) T50RFT8GSD-PA46-GY 156-00235
Fixing tie for hole (round), inside serrated, ⌀9.5-82.5mm, black, 100pcs.
Friction tab inside the fir tree allows the 120lb. tensile strength wide-strap cable tie to sit in mount without falling out prior to installation.
Porovnat
WSIFT9A-PA66HIRHSUV-BK 156-00069
Porovnat
Přidat do sledovaných položek
Friction tab inside the fir tree allows the 120lb. tensile strength wide-strap cable tie to sit in mount without falling out prior to installation.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) WSIFT9A-PA66HIRHSUV-BK 156-00069
Fixing tie for hole (round), inside serrated, ⌀9.5-105.0mm, black, 100pcs.
Friction tab inside the fir tree allows the 120lb. tensile strength wide-strap cable tie to sit in mount without falling out prior to installation.
Porovnat
WSRFT9A-PA66HIRHSUV-BK 156-00070
Porovnat
Přidat do sledovaných položek
Friction tab inside the fir tree allows the 120lb. tensile strength wide-strap cable tie to sit in mount without falling out prior to installation.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) WSRFT9A-PA66HIRHSUV-BK 156-00070
Fixing tie for hole (round), inside serrated, ⌀57.0mm, black, 100pcs.
Friction tab inside the fir tree allows the 120lb. tensile strength wide-strap cable tie to sit in mount without falling out prior to installation.
Porovnat
WSSFT9B-PA66HIRHSUV-BK 156-00072
Porovnat
Přidat do sledovaných položek
Friction tab inside the fir tree allows the 120lb. tensile strength wide-strap cable tie to sit in mount without falling out prior to installation.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) WSSFT9B-PA66HIRHSUV-BK 156-00072
Fixing tie for hole (oval), inside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50RFT6OVAL for oval holes 6.3 x 12.2 mm.
Porovnat
T50RFT6OVAL-PA66HS/PA66HIRHS-BK 150-37591
Porovnat
Přidat do sledovaných položek
T50RFT6OVAL for oval holes 6.3 x 12.2 mm.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50RFT6OVAL-PA66HS/PA66HIRHS-BK 150-37591
Fixing tie for hole (round), inside serrated, ⌀5.0-81.0mm, black, 500pcs.
Being a two-piece assembly allows the tie head to be located in the most convenient position.
Porovnat
T80ISFT6.5-PA66HS-BK 156-01699
Porovnat
Přidat do sledovaných položek
Being a two-piece assembly allows the tie head to be located in the most convenient position.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T80ISFT6.5-PA66HS-BK 156-01699
Fixing tie for hole (round), outside serrated, ⌀4.0-35.0mm, beige, 500pcs.
2-piece fixing element (PEEK) with arrow head for round holes and high temperature applications.
Porovnat
PT2AP1SFT6.5-PEEK-BGE 156-01090
Porovnat
Přidat do sledovaných položek
2-piece fixing element (PEEK) with arrow head for round holes and high temperature applications.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Beige (BGE) PT2AP1SFT6.5-PEEK-BGE 156-01090
Fixing tie for hole (round), outside serrated, ⌀4.0-35.0mm, beige, 500pcs.
2-piece fixing element (PEEK) with arrow head for round holes and high temperature applications.
Porovnat
PT2AP2SFT6.5-PEEK-BGE 156-01091
Porovnat
Přidat do sledovaných položek
2-piece fixing element (PEEK) with arrow head for round holes and high temperature applications.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Beige (BGE) PT2AP2SFT6.5-PEEK-BGE 156-01091
Fixing tie for hole (round), outside serrated, ⌀5.0-15.0mm, black, 500pcs.
T50SOSDSFT6.5 for parallel routing.
Porovnat
T50SOSDSFT6.5-PA66HS/PA66HIRHS-BK 156-00133
Porovnat
Přidat do sledovaných položek
T50SOSDSFT6.5 for parallel routing.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SOSDSFT6.5-PA66HS/PA66HIRHS-BK 156-00133
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, M6 Screw, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
LKM / CL8 Cable Tie Mounts with curved design.
Porovnat
CL8-PA66-NA 151-02258
Porovnat
Přidat do sledovaných položek
LKM / CL8 Cable Tie Mounts with curved design.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) CL8-PA66-NA 151-02258
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀5.5 mm, M4 Screw, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
LKC-PA66-BK 151-27010
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) LKC-PA66-BK 151-27010
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀6.2 mm, ⌀6.2 mm, #1/4" (M6) Screw, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Eliminates the need for multiple sizes of fixed diameter clamps.
Porovnat
HDM25-PA66HIRHSUV-BK 151-00437
Porovnat
Přidat do sledovaných položek
Eliminates the need for multiple sizes of fixed diameter clamps.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) HDM25-PA66HIRHSUV-BK 151-00437
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀3.1 mm, natural, 1000pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable Tie Mounts NY Series.
Porovnat
NY3256-PA66-NA 151-25219
Porovnat
Přidat do sledovaných položek
Cable Tie Mounts NY Series.
Porovnat
Porovnat
Přidat do sledovaných položek
1000 pcs.
Natural (NA) NY3256-PA66-NA 151-25219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie outside serrated for direct fixation, 420.0x12.7mm, ⌀114.0mm, black, 500pc.
The 1-piece design of Aerial Support Ties reduces installation time.
Porovnat
TAS120L-PA66HIRHSUV-BK 111-01672
Porovnat
Přidat do sledovaných položek
The 1-piece design of Aerial Support Ties reduces installation time.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) TAS120L-PA66HIRHSUV-BK 111-01672
Cable tie outside serrated, 250.0x4.65mm, ⌀4.0-65.0mm, beige, 100pcs.
PT2A PEEK cable tie for extreme temperature range for excellent performance in a range of environments.
Porovnat
PT3B-PEEK-BGE 118-00116
Porovnat
Přidat do sledovaných položek
PT2A PEEK cable tie for extreme temperature range for excellent performance in a range of environments.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Beige (BGE) PT3B-PEEK-BGE 118-00116
Cable tie inside serrated, 220.0x4.7mm, ⌀8.0-56.0mm, beige, 100pcs.
Extreme temperature range for excellent performance in a range of environments.
Porovnat
PT220-PEEK-BGE 111-01235
Porovnat
Přidat do sledovaných položek
Extreme temperature range for excellent performance in a range of environments.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Beige (BGE) PT220-PEEK-BGE 111-01235
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
Edge Clip applies easily to plastic and metal sheets without the need for a mounting hole
Porovnat
T50SOSEC12E-PA66HS-BK 148-00200
Porovnat
Přidat do sledovaných položek
Edge Clip applies easily to plastic and metal sheets without the need for a mounting hole
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SOSEC12E-PA66HS-BK 148-00200
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Porovnat
T50ROSEC5A-PA66HS/PA66HIRHS-BK 150-40591
Porovnat
Přidat do sledovaných položek
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROSEC5A-PA66HS/PA66HIRHS-BK 150-40591
Metal cable clip for edge, ⌀5.0-7.59mm, T=1.0 - 3.0mm, metal, 5000pcs.
Double-compression design can accommodate up to 2 wires or cables of varying sizes.
Porovnat
MSC2-SS304-ML 151-02320
Porovnat
Přidat do sledovaných položek
Double-compression design can accommodate up to 2 wires or cables of varying sizes.
Porovnat
Porovnat
Přidat do sledovaných položek
5000 pcs.
Metal (ML) MSC2-SS304-ML 151-02320
P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU12C-AL/CR-BK 211-15120
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU12C-AL/CR-BK 211-15120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU15C-AL/CR-BK 211-15150
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU15C-AL/CR-BK 211-15150
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU6C-AL/CR-BK 211-15060
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU6C-AL/CR-BK 211-15060
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU7C-AL/CR-BK 211-15070
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU7C-AL/CR-BK 211-15070
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU8C-AL/CR-BK 211-15080
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU8C-AL/CR-BK 211-15080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
ALU9C-AL/CR-BK 211-15090
Porovnat
Přidat do sledovaných položek
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU9C-AL/CR-BK 211-15090
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=63.0mm, Dmax=80.0mm, ⌀8.31 mm, 180°, black, 90pcs.
Porovnat
RCF180SM8SS-PA66HIRHSUV/SS304-BK 151-03122
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
90 pcs.
Black (BK) RCF180SM8SS-PA66HIRHSUV/SS304-BK 151-03122
Bundling clip for edge, L=40.0mm, black, 500pcs.
Tape bar provides a convenient surface for securing a bundle using a cable tie or tape.
Porovnat
EC14-PA66HIRHS-BK 151-03404
Porovnat
Přidat do sledovaných položek
Tape bar provides a convenient surface for securing a bundle using a cable tie or tape.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) EC14-PA66HIRHS-BK 151-03404
Bundling clip for edge, L=46.5mm, black, 500pcs.
Cables and leads can be fastened with a cable tie or adhesive tape to the bar of the mounting element.
Porovnat
EC17-PA66HIRHS-BK 151-03403
Porovnat
Přidat do sledovaných položek
Cables and leads can be fastened with a cable tie or adhesive tape to the bar of the mounting element.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) EC17-PA66HIRHS-BK 151-03403
Bundling clip for hole (oval), L=40.0mm, black, 1000pcs.
Oval fir tree firmly secures clip to mounting surface.
Porovnat
WICKELCLIP-VDS-PA66HIRHS-BK 155-16301
Porovnat
Přidat do sledovaných položek
Oval fir tree firmly secures clip to mounting surface.
Porovnat
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) WICKELCLIP-VDS-PA66HIRHS-BK 155-16301
Bundling clip for hole (round), L=55.0mm, natural, 10000pcs.
Bundling Clip for round holes 6.5 mm.
Porovnat
TC2FT6LG-PA66HIRHS-NA 151-00020
Porovnat
Přidat do sledovaných položek
Bundling Clip for round holes 6.5 mm.
Porovnat
Porovnat
Přidat do sledovaných položek
10000 pcs.
Natural (NA) TC2FT6LG-PA66HIRHS-NA 151-00020
Bundling clip for hole (round), L=37.0mm, natural, 10000pcs.
Porovnat
TC4FT6LG-PA66HIRHS-NA 151-00467
Porovnat
Přidat do sledovaných položek
Porovnat
Porovnat
Přidat do sledovaných položek
10000 pcs.
Natural (NA) TC4FT6LG-PA66HIRHS-NA 151-00467
Releasable cable tie, 260x11.0mm, ⌀65.0mm, 123N, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
The elasticity of the SOFTIX ties makes them suitable for use in many applications.
Porovnat
SRT26011-TPU-BK 115-11269
Porovnat
Přidat do sledovaných položek
The elasticity of the SOFTIX ties makes them suitable for use in many applications.
Porovnat
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) SRT26011-TPU-BK 115-11269
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Releasable cable tie, 580x28.0mm, ⌀150mm, 360N, black, 10pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
The elasticity of the SOFTIX ties makes them suitable for use in many applications.
Porovnat
SRT58028-TPU-BK 115-28589
Porovnat
Přidat do sledovaných položek
The elasticity of the SOFTIX ties makes them suitable for use in many applications.
Porovnat
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) SRT58028-TPU-BK 115-28589
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, inside serrated, ⌀6.4-58.0mm, black, 500pcs.
Provides dual separation between bundles to prevent chafing and abrasion.
Porovnat
DCT11-PA66HIRHSUV-BK 115-31101
Porovnat
Přidat do sledovaných položek
Provides dual separation between bundles to prevent chafing and abrasion.
Porovnat
Porovnat
Přidat do sledovaných položek
500 bag
Black (BK) DCT11-PA66HIRHSUV-BK 115-31101
Fixing tie for stud, inside serrated, ⌀6.4-58.0mm, black, 100pcs.
Provides dual separation between bundles to prevent chafing and abrasion.
Porovnat
DCT11-PA66HIRHSUV-BK 115-00144
Porovnat
Přidat do sledovaných položek
Provides dual separation between bundles to prevent chafing and abrasion.
Porovnat
Porovnat
Přidat do sledovaných položek
100 bag
Black (BK) DCT11-PA66HIRHSUV-BK 115-00144
Fixing tie for stud, inside serrated, ⌀9.0-40.0mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Flexible head wraps around cable bundle for easy installation.
Porovnat
RT50RS5-PA66-BK 115-07110
Porovnat
Přidat do sledovaných položek
Flexible head wraps around cable bundle for easy installation.
Porovnat
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) RT50RS5-PA66-BK 115-07110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for hole (oval), outside serrated, ⌀2.0-50.0mm, brown, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Porovnat
T50ROSFTOVALU-PA46-BN 157-00157
Porovnat
Přidat do sledovaných položek
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Porovnat
Porovnat
Přidat do sledovaných položek
500 pcs.
Brown (BN) T50ROSFTOVALU-PA46-BN 157-00157
Fixing tie for hole (round), outside serrated, ⌀4-20mm, beige, 9000pcs.
One piece fixing tie with arrowhead, outside serrated.
Porovnat
PT2ASFT6.5PT0.7-1.5-E-PEEK-BGE 126-00183
Porovnat
Přidat do sledovaných položek
One piece fixing tie with arrowhead, outside serrated.
Porovnat
Porovnat
Přidat do sledovaných položek
9000 pcs.
Beige (BGE) PT2ASFT6.5PT0.7-1.5-E-PEEK-BGE 126-00183

Výsledky pro "D-Clip Series" v Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

  Czech Republic

Sociální média

© HellermannTyton 2026 (v4.312.3)  |  Aktualizace: 16/08/2026  |  Nastavení ochrany osobních údajů
Hledat prodejce Kontakt