Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
25/08/2025

Výsledky pro "D-Clip Series"

Nalezeno 3 514 výrobků 3 dalších položek
Poznámka:  Kombinace hledaných výrazů nevrátila žádné odpovídající výsledky.  Níže jsou výsledky, které odpovídají dílům dle Vašeho vyhledávání.

Typ: Zkuste změnit nebo odstranit výrazy, abyste zlepšili relevanci výsledků vyhledávání.

K dispozici jsou výsledky v následujících kategoriích:
Cable Ties and Fixings

Cable Ties and Fixings  (1889)

Cable Ties Inside Serrated  (455) Cable Ties Outside Serrated  (69) Cable Ties Without Serration  (35) Cable Ties, Releasable  (85) Cable Ties, Stainless Steel  (132) Cable Ties With Fixing Elements  (328) Cable Tie Mounts  (179) Fixing Elements  (130) Clips, Clamps and Plugs  (596)
Cable Ties and Fixings
Cable Ties and Fixings (1889)
Insulation

Insulation  (632)

Heat Shrink Tubing  (288) Heat Shrinkable Moulded Shapes  (333) Insulating tubes  (13)
Insulation
Insulation (632)
Cable Protection Systems

Cable Protection Systems  (180)

Non-Metallic Conduit Systems  (10) Spiral-Reinforced Conduit Systems  (10) Conduit System Accessories  (17) Protective Tubing and Spiral Binding  (20) Expandable Braided Sleeves  (18) Open Woven Sleeves  (18) Grommets  (60) Wiring Ducts and Accessories  (45)
Cable Protection Systems
Cable Protection Systems (180)
Electrical Installation

Electrical Installation  (1)

Industrial Silicones  (1)
Electrical Installation
Electrical Installation (1)
Identification Systems

Identification Systems  (515)

Wire and Cable Markers  (439) Control Panel Labelling  (19) Industrial Identification  (4) RFID tags and cable ties  (52) Security Labeling  (5) Hazardous Area Identification  (1)
Identification Systems
Identification Systems (515)
Application Tooling

Application Tooling  (38)

Automatic Cable Tying System  (1) Application Tooling for Cable Ties  (24) Application Tooling for Snappers  (3) Application Tooling for Non Shrinkable Tubing  (8) Application Tooling for Braided Sleeves  (2)
Application Tooling
Application Tooling (38)
Connectivity

Connectivity  (260)

Patch Panels  (5) Data Outlets  (5) Fibre  (12) Cable  (64) Accessories  (14) Enclosures  (82) Cablelok  (78) Broadband Accessories  (78)
Connectivity
Connectivity (260)
3 514 produkty
Resetovat vše
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Porovnat
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
T50ROSFT625SO-PA66HIRHSUV-BK 157-00195
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROSFT625SO-PA66HIRHSUV-BK 157-00195
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Porovnat
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
T50ROSFT825SO-PA66HIRHSUV-BK 157-00196
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROSFT825SO-PA66HIRHSUV-BK 157-00196
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 1000pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Porovnat
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 1000pcs.
T50ROSFT812.5SO-PA66HIRHSUV-BK 157-00217
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) T50ROSFT812.5SO-PA66HIRHSUV-BK 157-00217
Fixing tie for hole (round), inside serrated, ⌀1.0-45.0mm, grey, 500pcs.
2-piece fixing tie for blind holes.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀1.0-45.0mm, grey, 500pcs.
T50RDHA8.4x20-PA46-GY 156-01155
Porovnat
Přidat do sledovaných položek
500 pcs.
Grey (GY) T50RDHA8.4x20-PA46-GY 156-01155
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
The holding tab increases the tensile strength additionaly.
Porovnat
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSCST-PA66HS/PA66HIRHS-BK 156-00620
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROSCST-PA66HS/PA66HIRHS-BK 156-00620
Cable clip, T=0.6 - 6.75mm, ⌀7.0 x 12.0 mm, Dmin=36.01mm, Dmax=50.8mm
High-performing oval fir trees ensure anti-twist protection.
Porovnat
Cable clip, T=0.6 - 6.75mm, ⌀7.0 x 12.0 mm, Dmin=36.01mm, Dmax=50.8mm
IRCDFTOVAL-PA66HIRHSUV-BK 156-02648
Porovnat
Přidat do sledovaných položek
200 pcs.
Black (BK) IRCDFTOVAL-PA66HIRHSUV-BK 156-02648
Connector clip for connector/for hole (oval), black, 4000pcs.
Connector clip with fir tree includes clamping rails to provide full circumferential compression around bundles.
Porovnat
Connector clip for connector/for hole (oval), black, 4000pcs.
CC12-PA66HIRHSUV-BK 151-01136
Porovnat
Přidat do sledovaných položek
4000 pcs.
Black (BK) CC12-PA66HIRHSUV-BK 151-01136
Connector clip for edge, EWCAP-005-11, black, 500pcs.
Porovnat
Connector clip for edge, EWCAP-005-11, black, 500pcs.
EC43-PA66HIRHS-BK 151-00430
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) EC43-PA66HIRHS-BK 151-00430
Connector clip, EWCAP-005-7, black, 5000pcs.
Porovnat
Connector clip, EWCAP-005-7, black, 5000pcs.
EC54-PA66HIRHSUV-BK 151-01042
Porovnat
Přidat do sledovaných položek
5000 pcs.
Black (BK) EC54-PA66HIRHSUV-BK 151-01042
Fixing tie for hole (round), inside serrated, ⌀2.0-45.0mm, black, 500pcs.
Being a two-piece assembly allows the tie head to be located in the most convenient position.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀2.0-45.0mm, black, 500pcs.
T50RSFT6.5-PA66HS-BK 156-01697
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50RSFT6.5-PA66HS-BK 156-01697
Cable tie mount for screw fixation, Wmax=4.6mm, ⌀7.1 mm, natural, 500pcs.
FH Cable Tie Mounts for areas with limited space.
Porovnat
Cable tie mount for screw fixation, Wmax=4.6mm, ⌀7.1 mm, natural, 500pcs.
FH50-PA66-NA 151-61519
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
500 pcs.
Natural (NA) FH50-PA66-NA 151-61519
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=7.6mm, ⌀6.0 mm, black, 100pcs.
LKM / CL8 Cable Tie Mounts with curved design.
Porovnat
Cable tie mount for screw fixation, Wmax=7.6mm, ⌀6.0 mm, black, 100pcs.
LKM-PA66-BK 151-26301
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) LKM-PA66-BK 151-26301
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=7.6mm, ⌀6.0 mm, natural, 100pcs.
LKM / CL8 Cable Tie Mounts with curved design.
Porovnat
Cable tie mount for screw fixation, Wmax=7.6mm, ⌀6.0 mm, natural, 100pcs.
LKM-PA66-NA 151-26304
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) LKM-PA66-NA 151-26304
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=13.0mm, ⌀6.0 mm, M6 Screw, natural, 100pcs.
Porovnat
Cable tie mount for screw fixation, Wmax=13.0mm, ⌀6.0 mm, M6 Screw, natural, 100pcs.
LKCSF1-PA66-NA 151-27219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) LKCSF1-PA66-NA 151-27219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=13.0mm, ⌀6.0 mm, M6 Screw, black, 100pcs.
Porovnat
Cable tie mount for screw fixation, Wmax=13.0mm, ⌀6.0 mm, M6 Screw, black, 100pcs.
LKCSF1-PA66-BK 151-27202
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) LKCSF1-PA66-BK 151-27202
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=6.0mm, ⌀4.5 mm, M4 Screw, black, 100pcs.
KR8G5 Srew Fixing Mounts with curved design
Porovnat
Cable tie mount for screw fixation, Wmax=6.0mm, ⌀4.5 mm, M4 Screw, black, 100pcs.
KR6G5-PA66-BK 151-24600
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) KR6G5-PA66-BK 151-24600
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=6.4mm, ⌀4.5 mm, M4 Screw, blue, 100pcs.
Porovnat
Cable tie mount for screw fixation, Wmax=6.4mm, ⌀4.5 mm, M4 Screw, blue, 100pcs.
KR6G5-E/TFE-BU 151-00653
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Blue (BU) KR6G5-E/TFE-BU 151-00653
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=8.3mm, ⌀6.5 mm, M6 Screw, blue, 100pcs.
Porovnat
Cable tie mount for screw fixation, Wmax=8.3mm, ⌀6.5 mm, M6 Screw, blue, 100pcs.
KR8G5-E/TFE-BU 151-00654
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Blue (BU) KR8G5-E/TFE-BU 151-00654
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀3.8 mm, #6 (M3) Screw, black, 100pcs.
Porovnat
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀3.8 mm, #6 (M3) Screw, black, 100pcs.
CTM0-PA66-BK 151-30300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) CTM0-PA66-BK 151-30300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.8 mm, #8 (M4) Screw, black, 100pcs.
Porovnat
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.8 mm, #8 (M4) Screw, black, 100pcs.
CTM1-PA66-BK 151-30400
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) CTM1-PA66-BK 151-30400
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀4.6 mm, #8 (M4) Screw, black, 100pcs.
Porovnat
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀4.6 mm, #8 (M4) Screw, black, 100pcs.
CTM2-PA66-BK 151-30500
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) CTM2-PA66-BK 151-30500
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀4.6 mm, #8 (M4) Screw, white, 100pcs.
Porovnat
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀4.6 mm, #8 (M4) Screw, white, 100pcs.
CTM2-PA66-WH 151-30504
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) CTM2-PA66-WH 151-30504
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀6.4 mm, #1/4" (M6) Screw, black, 100pcs.
Porovnat
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀6.4 mm, #1/4" (M6) Screw, black, 100pcs.
CTM4-PA66-BK 151-30700
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) CTM4-PA66-BK 151-30700
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀4.7 mm, ⌀4.8 mm, #10 (M5) Screw, black, 100pcs.
Mount and tie combination makes it easy to service bundles in the field.
Porovnat
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀4.7 mm, ⌀4.8 mm, #10 (M5) Screw, black, 100pcs.
HDM19-PA66HIRHSUV-BK 151-00134
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) HDM19-PA66HIRHSUV-BK 151-00134
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.31 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.
Mount and tie combination makes it easy to service bundles in the field.
Porovnat
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.31 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.
HDM321-PA66HIRHSUV-BK 151-07100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) HDM321-PA66HIRHSUV-BK 151-07100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀10.29 mm, ⌀10.0 mm, 3/8" (M10) Screw, black, 500pcs.
Mount and tie combination makes it easy to service bundles in the field.
Porovnat
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀10.29 mm, ⌀10.0 mm, 3/8" (M10) Screw, black, 500pcs.
HDM400-PA66HIRHSUV-BK 151-01224
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) HDM400-PA66HIRHSUV-BK 151-01224
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀10.29 mm, ⌀9.5 mm, 3/8" (M10) Screw, black, 500pcs.
Mount and tie combination makes it easy to service bundles in the field.
Porovnat
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀10.29 mm, ⌀9.5 mm, 3/8" (M10) Screw, black, 500pcs.
HDM401-PA66HIRHSUV-BK 151-07300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) HDM401-PA66HIRHSUV-BK 151-07300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀12.7 mm, ⌀12.0 mm, 1/2" (M12) Screw, black, 500pcs.
Mount and tie combination makes it easy to service bundles in the field.
Porovnat
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀12.7 mm, ⌀12.0 mm, 1/2" (M12) Screw, black, 500pcs.
HDM500-PA66HIRHSUV-BK 151-02096
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) HDM500-PA66HIRHSUV-BK 151-02096
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀12.7 mm, ⌀12.0 mm, 1/2" (M12) Screw, black, 500pcs.
Mount and tie combination makes it easy to service bundles in the field.
Porovnat
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀12.7 mm, ⌀12.0 mm, 1/2" (M12) Screw, black, 500pcs.
HDM501-PA66HIRHSUV-BK 151-07500
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) HDM501-PA66HIRHSUV-BK 151-07500
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀10.29 mm, ⌀10.3 mm, 3/8" (M10) Screw, black, 100pcs.
Arched
Porovnat
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀10.29 mm, ⌀10.3 mm, 3/8" (M10) Screw, black, 100pcs.
HDM375BDM4W-R-PA66HIRHSUV-BK 151-02104
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) HDM375BDM4W-R-PA66HIRHSUV-BK 151-02104
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, ⌀5.0 mm, black, 2000pcs.
Plastic Nuts KM5 and KM6.
Porovnat
Cable tie mount for screw fixation, ⌀5.0 mm, black, 2000pcs.
KM5-PA66HIRHS-BK 150-51910
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
2000 pcs.
Black (BK) KM5-PA66HIRHS-BK 150-51910
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀5.0 mm, M4 Screw, black, 100pcs.
Simple to install with a screw or rivet.
Porovnat
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀5.0 mm, M4 Screw, black, 100pcs.
MB2-PA66-BK 151-28210
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) MB2-PA66-BK 151-28210
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie outside serrated for direct fixation, 270.0x12.7mm, ⌀70.0mm, black, 500pcs.
The 1-piece design of Aerial Support Ties reduces installation time.
Porovnat
Cable tie outside serrated for direct fixation, 270.0x12.7mm, ⌀70.0mm, black, 500pcs.
TAS120M-PA66HIRHSUV-BK 111-01671
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) TAS120M-PA66HIRHSUV-BK 111-01671
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.0 mm, ⌀8.0 mm, 5/16" (M8) Screw, grey, 500pcs.
Positions bundles off cross members and frame rails to prevent abrasion and chafing.
Porovnat
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.0 mm, ⌀8.0 mm, 5/16" (M8) Screw, grey, 500pcs.
SAM83-PA66HIRHS-GY 151-29600
Porovnat
Přidat do sledovaných položek
500 pcs.
Grey (GY) SAM83-PA66HIRHS-GY 151-29600
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.0 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.
Positions bundles off cross members and frame rails to prevent abrasion and chafing.
Porovnat
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.0 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.
SAOM82-PA66HIRHSUV-BK 151-29701
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) SAOM82-PA66HIRHSUV-BK 151-29701
Cable tie tool for 2.5 - 4.8mm, pneumatic, 0.58215kg, metal
The pneumatic tensioning tool MK3PNSP2 for plastic cable ties with max. width of 4.8 mm.
Porovnat
Cable tie tool for 2.5 - 4.8mm, pneumatic, 0.58215kg, metal
MK3PNSP2 with tension lock-AL-ML 110-03420
Porovnat
Přidat do sledovaných položek
1 pcs.
Metal (ML) MK3PNSP2 with tension lock-AL-ML 110-03420
Cable tie tool for 2.5 - 4.8mm, pneumatic, 0.58215kg, metal
The pneumatic tensioning tool MK3PNSP2 for plastic cable ties with max. width of 4.8 mm.
Porovnat
Cable tie tool for 2.5 - 4.8mm, pneumatic, 0.58215kg, metal
MK3PNSP2 with microswitch-AL-ML 110-03440
Porovnat
Přidat do sledovaných položek
1 pcs.
Metal (ML) MK3PNSP2 with microswitch-AL-ML 110-03440
Cable tie tool for 2.5 - 4.8mm, pneumatic, 0.568kg, metal
The pneumatic tensioning tool MK3PNSP2 for plastic cable ties with max. width of 4.8 mm.
Porovnat
Cable tie tool for 2.5 - 4.8mm, pneumatic, 0.568kg, metal
MK3PNSP2 with microswitch and tension lock-AL-ML 110-03460
Porovnat
Přidat do sledovaných položek
1 pcs.
Metal (ML) MK3PNSP2 with microswitch and tension lock-AL-ML 110-03460
Fixing tie for hole (round), outside serrated, ⌀27.0-44.0mm, black, 100pcs.
Fixing ties with rivet especially for safe fixing.
Porovnat
Fixing tie for hole (round), outside serrated, ⌀27.0-44.0mm, black, 100pcs.
RELF170-PA66HIR-BK 115-40902
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) RELF170-PA66HIR-BK 115-40902
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for hole (round), not serrated, ⌀42.0mm, black, 500pcs.
Porovnat
Fixing tie for hole (round), not serrated, ⌀42.0mm, black, 500pcs.
FBR6/140-PA66-BK 150-27140
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) FBR6/140-PA66-BK 150-27140
Fixing tie for stud, inside serrated, ⌀9.5-57.1mm, black, 300pcs.
Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.
Porovnat
Fixing tie for stud, inside serrated, ⌀9.5-57.1mm, black, 300pcs.
WSS380-PA66HIRHSUV-BK 157-00403
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) WSS380-PA66HIRHSUV-BK 157-00403
Fixing tie for stud, inside serrated, ⌀9.5-105.0mm, black, 300pcs.
Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.
Porovnat
Fixing tie for stud, inside serrated, ⌀9.5-105.0mm, black, 300pcs.
WSR380-PA66HIRHSUV-BK 157-00405
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) WSR380-PA66HIRHSUV-BK 157-00405
Fixing tie for stud, ⌀5.0-60.0mm, black, 25pcs.
Porovnat
Fixing tie for stud, ⌀5.0-60.0mm, black, 25pcs.
SBT120-M6-PA66HSUV-BK 157-00022
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
25 pcs.
Black (BK) SBT120-M6-PA66HSUV-BK 157-00022
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, ⌀5.0-35.0mm, black, 50pcs.
Porovnat
Fixing tie for stud, ⌀5.0-35.0mm, black, 50pcs.
SBT50-M12-PA66HSUV-BK 157-00025
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) SBT50-M12-PA66HSUV-BK 157-00025
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, ⌀5.0-35.0mm, black, 50pcs.
Porovnat
Fixing tie for stud, ⌀5.0-35.0mm, black, 50pcs.
SBT50-M8-PA66HSUV-BK 157-00027
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) SBT50-M8-PA66HSUV-BK 157-00027
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, inside serrated, ⌀9.5-82.5mm, black, 300pcs.
Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.
Porovnat
Fixing tie for stud, inside serrated, ⌀9.5-82.5mm, black, 300pcs.
WSI8MM-PA66HIRHSUV-BK 157-00035
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) WSI8MM-PA66HIRHSUV-BK 157-00035
Fixing tie for stud, inside serrated, ⌀9.5-105.0mm, black, 300pcs.
Wide strap cable tie with 8 mm stud mount.
Porovnat
Fixing tie for stud, inside serrated, ⌀9.5-105.0mm, black, 300pcs.
WSR8MM-PA66HIRHSUV-BK 157-00036
Porovnat
Přidat do sledovaných položek
300 pcs.
Black (BK) WSR8MM-PA66HIRHSUV-BK 157-00036
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
Porovnat
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
T50SOSSBD-M5-PA66HSUV-BK 157-00044
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T50SOSSBD-M5-PA66HSUV-BK 157-00044
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
T50SOSSBD-M10
Porovnat
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
T50SOSSBU-M5-PA66HSUV-GY 157-00064
Porovnat
Přidat do sledovaných položek
100 pcs.
Grey (GY) T50SOSSBU-M5-PA66HSUV-GY 157-00064
Fixing tie for stud, outside serrated, ⌀2.0-50.0mm, brown, 2000pcs.
Offset design positions bundles away from obstructions, heat or sources of abrasion.
Porovnat
Fixing tie for stud, outside serrated, ⌀2.0-50.0mm, brown, 2000pcs.
T50ROSM6SMSO25-PA46-BN 157-00326
Porovnat
Přidat do sledovaných položek
2000 pcs.
Brown (BN) T50ROSM6SMSO25-PA46-BN 157-00326
Fixing tie for stud, outside serrated, ⌀2.0-50.0mm, brown, 1500
Offset design positions bundles away from obstructions, heat or sources of abrasion.
Porovnat
Fixing tie for stud, outside serrated, ⌀2.0-50.0mm, brown, 1500
T50ROSM8SMSO25-PA46-BN 157-00328
Porovnat
Přidat do sledovaných položek
1500 pcs.
Brown (BN) T50ROSM8SMSO25-PA46-BN 157-00328
Fixing tie for screw fixation, inside serrated, ⌀3.0-100.0mm, black, 100pcs.
Screw mount style creates low insertion and high extraction force.
Porovnat
Fixing tie for screw fixation, inside serrated, ⌀3.0-100.0mm, black, 100pcs.
T50ML-PA66-BK 113-00007
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T50ML-PA66-BK 113-00007
Fixing tie for screw fixation, inside serrated, ⌀1.5-85.0mm, black, 1000pcs.
Mount secures firmly with any #10 screw.
Porovnat
Fixing tie for screw fixation, inside serrated, ⌀1.5-85.0mm, black, 1000pcs.
T50MI-PA66-BK 113-00031
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) T50MI-PA66-BK 113-00031
Fixing tie for screw fixation, inside serrated, ⌀1.5-45.0mm, black, 100pcs.
Secures with a screw or bolt.
Porovnat
Fixing tie for screw fixation, inside serrated, ⌀1.5-45.0mm, black, 100pcs.
T50MRX-PA66HS-BK 113-00060
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) T50MRX-PA66HS-BK 113-00060
RFID label, 860-960 MHz (UHF), white, 250.00x33.00mm, 500pcs.
RFID bundling label TAG250x33T1UHF – temporary unique identification of cable and wire harnesses.
Porovnat
RFID label, 860-960 MHz (UHF), white, 250.00x33.00mm, 500pcs.
TAG250x33T1UHF-1603-WH 556-00846
Porovnat
Přidat do sledovaných položek
500 pcs.
White (WH) TAG250x33T1UHF-1603-WH 556-00846
RFID label, 860-960 MHz (UHF), white, 130.00x50.00mm, 1000pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Porovnat
RFID label, 860-960 MHz (UHF), white, 130.00x50.00mm, 1000pcs.
TAG130x50T1UHF-1603-WH 556-00847
Porovnat
Přidat do sledovaných položek
1000 pcs.
White (WH) TAG130x50T1UHF-1603-WH 556-00847
Identification cable tie, 100.0x25mm, ⌀6.00-22.00mm, black, 1000pcs.
Cable tie features an identification plate to easily identify bundles.
Porovnat
Identification cable tie, 100.0x25mm, ⌀6.00-22.00mm, black, 1000pcs.
IT18R-PA66-BK 111-81860
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) IT18R-PA66-BK 111-81860
Three-pronged plier Dmin=7.50mm, Dmax=10.00mm, 15.5mm, 50mm, metal, 1pc.
Fast, secure application with the NA three-pronged pliers.
Porovnat
Three-pronged plier Dmin=7.50mm, Dmax=10.00mm, 15.5mm, 50mm, metal, 1pc.
NA4/5-MET-ML 621-10405
Porovnat
Přidat do sledovaných položek
1 pcs.
Metal (ML) NA4/5-MET-ML 621-10405
Fluoroelastomer Heat Shrinkable Tubing 2:1 50.8/25.4 black
Viton®-E for flexibility and protection against aggressive chemicals.
Porovnat
Fluoroelastomer Heat Shrinkable Tubing 2:1 50.8/25.4 black
VITON®-E-50.8/25.4-FPMX-BK 330-05080
Porovnat
Přidat do sledovaných položek
15 metre
Black (BK) VITON®-E-50.8/25.4-FPMX-BK 330-05080
Heat shrinkable tubing adhesive lined
EPS300 and EPS400 offer high shrink ratios and protection against humidity.
Porovnat
Heat shrinkable tubing adhesive lined
EPS-300-6/2-PO-X-BK 340-06021
Porovnat
Přidat do sledovaných položek
1.2 m
Black (BK) EPS-300-6/2-PO-X-BK 340-06021
Heat shrinkable tubing adhesive lined
EPS300 and EPS400 offer high shrink ratios and protection against humidity.
Porovnat
Heat shrinkable tubing adhesive lined
EPS-300-6/2-PO-X-BK 340-06022
Porovnat
Přidat do sledovaných položek
50 m
Black (BK) EPS-300-6/2-PO-X-BK 340-06022
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-50.8/25.4-PO-X-CL 305-50819
Porovnat
Přidat do sledovaných položek
35 metre
Transparent (CL) HFT-B-50.8/25.4-PO-X-CL 305-50819
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B -76.0/38.0-PO-X-CL 305-76219
Porovnat
Přidat do sledovaných položek
25 metre
Transparent (CL) HFT-B -76.0/38.0-PO-X-CL 305-76219
Heat shrinkable tubing 2:1 (1.2/0.6 mm), transparent , 100 m
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat shrinkable tubing 2:1 (1.2/0.6 mm), transparent , 100 m
HFT-B-1.2/0.6-PO-X-CL 305-01219
Porovnat
Přidat do sledovaných položek
400 metre
Transparent (CL) HFT-B-1.2/0.6-PO-X-CL 305-01219
Heat Shrinkable Tubing 3:1 black in blister bags 3/1
HIS-3 bag 3:1 black.
Porovnat
Heat Shrinkable Tubing 3:1 black in blister bags 3/1
HIS-3-BAG-3/1-PO-X-BK 308-30310
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HIS-3-BAG-3/1-PO-X-BK 308-30310
Heat Shrinkable Tubing 3:1 red in blister bags 3/1
HIS-3 bag 3:1 red, width 112.
Porovnat
Heat Shrinkable Tubing 3:1 red in blister bags 3/1
HIS-3-BAG-3/1-PO-X-RD 308-30311
Porovnat
Přidat do sledovaných položek
10 pcs.
Red (RD) HIS-3-BAG-3/1-PO-X-RD 308-30311
Heat Shrinkable Tubing 3:1 blue in blister bags 3/1
HIS-3 bag 3:1 blue, width 112.
Porovnat
Heat Shrinkable Tubing 3:1 blue in blister bags 3/1
HIS-3-BAG-3/1-PO-X-BU 308-30312
Porovnat
Přidat do sledovaných položek
10 pcs.
Blue (BU) HIS-3-BAG-3/1-PO-X-BU 308-30312
Heat Shrinkable Tubing 3:1 grey in blister bags 3/1
HIS-3 bag 3:1 grey, width 112.
Porovnat
Heat Shrinkable Tubing 3:1 grey in blister bags 3/1
HIS-3-BAG-3/1-PO-X-GY 308-30313
Porovnat
Přidat do sledovaných položek
10 bag
Grey (GY) HIS-3-BAG-3/1-PO-X-GY 308-30313
Heat Shrinkable Tubing 3:1 brown in blister bags 3/1
HIS-3 bag 3:1 brown, width 112.
Porovnat
Heat Shrinkable Tubing 3:1 brown in blister bags 3/1
HIS-3-BAG-3/1-PO-X-BN 308-30314
Porovnat
Přidat do sledovaných položek
10 pcs.
Brown (BN) HIS-3-BAG-3/1-PO-X-BN 308-30314
Heat Shrinkable Tubing 3:1 transparent in blister bags 3/1
HIS-3 bag 3:1 transparent, width 112.
Porovnat
Heat Shrinkable Tubing 3:1 transparent in blister bags 3/1
HIS-3-BAG-3/1-PO-X-CL 308-30315
Porovnat
Přidat do sledovaných položek
10 bag
Transparent (CL) HIS-3-BAG-3/1-PO-X-CL 308-30315
Heat Shrinkable Tubing 3:1 green/yellow in blister bags 3/1
HIS-3 bag 3:1 green-yellow.
Porovnat
Heat Shrinkable Tubing 3:1 green/yellow in blister bags 3/1
HIS-3-BAG-3/1-PO-X-GNYE 308-30316
Porovnat
Přidat do sledovaných položek
10 pcs.
Green-Yellow (GNYE) HIS-3-BAG-3/1-PO-X-GNYE 308-30316
Heat Shrinkable Tubing 3:1 black in blister bags 6/2
HIS-3 bag 6:2 black.
Porovnat
Heat Shrinkable Tubing 3:1 black in blister bags 6/2
HIS-3-BAG-6/2-PO-X-BK 308-30610
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HIS-3-BAG-6/2-PO-X-BK 308-30610
Heat Shrinkable Tubing 3:1 red in blister bags 6/2
HIS-3 bag 6:2 red, width 112.
Porovnat
Heat Shrinkable Tubing 3:1 red in blister bags 6/2
HIS-3-BAG-6/2-PO-X-RD 308-30611
Porovnat
Přidat do sledovaných položek
10 pcs.
Red (RD) HIS-3-BAG-6/2-PO-X-RD 308-30611
Heat Shrinkable Tubing 3:1 blue in blister bags 6/2
HIS-3 bag 6:2 blue, width 112.
Porovnat
Heat Shrinkable Tubing 3:1 blue in blister bags 6/2
HIS-3-BAG-6/2-PO-X-BU 308-30612
Porovnat
Přidat do sledovaných položek
10 pcs.
Blue (BU) HIS-3-BAG-6/2-PO-X-BU 308-30612
Heat Shrinkable Tubing 3:1 grey in blister bags 6/2
HIS-3 bag 6:2 grey, width 112.
Porovnat
Heat Shrinkable Tubing 3:1 grey in blister bags 6/2
HIS-3-BAG-6/2-PO-X-GY 308-30613
Porovnat
Přidat do sledovaných položek
10 pcs.
Grey (GY) HIS-3-BAG-6/2-PO-X-GY 308-30613
Heat Shrinkable Tubing 3:1 brown in blister bags 6/2
HIS-3 bag 6:2 brown, width 112.
Porovnat
Heat Shrinkable Tubing 3:1 brown in blister bags 6/2
HIS-3-BAG-6/2-PO-X-BN 308-30614
Porovnat
Přidat do sledovaných položek
10 pcs.
Brown (BN) HIS-3-BAG-6/2-PO-X-BN 308-30614
Heat Shrinkable Tubing 3:1 transparent 6/2
HIS-3 bag 6:2 transparent, width 112.
Porovnat
Heat Shrinkable Tubing 3:1 transparent 6/2
HIS-3-BAG-6/2-PO-X-CL 308-30615
Porovnat
Přidat do sledovaných položek
10 bag
Transparent (CL) HIS-3-BAG-6/2-PO-X-CL 308-30615
Heat Shrinkable Tubing 3:1 black in blister bag 1,5/0,5
HIS-3 bag 1.5:0.5 black.
Porovnat
Heat Shrinkable Tubing 3:1 black in blister bag 1,5/0,5
HIS-3-BAG-1.5/0.5-PO-X-BK 308-30151
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HIS-3-BAG-1.5/0.5-PO-X-BK 308-30151
Heat Shrinkable Tubing 3:1 red in blister bag 1,5/0,5
HIS-3 bag 1,5:0,5 red, width 112.
Porovnat
Heat Shrinkable Tubing 3:1 red in blister bag 1,5/0,5
HIS-3-BAG-1.5/0.5-PO-X-RD 308-30160
Porovnat
Přidat do sledovaných položek
10 pcs.
Red (RD) HIS-3-BAG-1.5/0.5-PO-X-RD 308-30160
Heat Shrinkable Tubing 3:1 blue in blister bag 1,5/0,5
HIS-3 bag 1.5:0.5 blue, width 112.
Porovnat
Heat Shrinkable Tubing 3:1 blue in blister bag 1,5/0,5
HIS-3-BAG-1.5/0.5-PO-X-BU 308-30161
Porovnat
Přidat do sledovaných položek
10 pcs.
Blue (BU) HIS-3-BAG-1.5/0.5-PO-X-BU 308-30161
Heat Shrinkable Tubing 3:1 grey in blister bag 1,5/0,5
HIS-3 bag 1.5:0.5 grey, width 112.
Porovnat
Heat Shrinkable Tubing 3:1 grey in blister bag 1,5/0,5
HIS-3-BAG-1.5/0.5-PO-X-GY 308-30162
Porovnat
Přidat do sledovaných položek
10 bag
Grey (GY) HIS-3-BAG-1.5/0.5-PO-X-GY 308-30162
Heat Shrinkable Tubing 3:1 brown in blister bag 1,5/0,5
HIS-3 bag 1.5:0.5 brown, width 112.
Porovnat
Heat Shrinkable Tubing 3:1 brown in blister bag 1,5/0,5
HIS-3-BAG-1.5/0.5-PO-X-BN 308-30163
Porovnat
Přidat do sledovaných položek
10 pcs.
Brown (BN) HIS-3-BAG-1.5/0.5-PO-X-BN 308-30163
Heat Shrinkable Tubing 3:1 transparent in blister bag 1,5/0,5
HIS-3 bag 1.5:0.5 transparent, width 112.
Porovnat
Heat Shrinkable Tubing 3:1 transparent in blister bag 1,5/0,5
HIS-3-BAG-1.5/0.5-PO-X-CL 308-30164
Porovnat
Přidat do sledovaných položek
10 bag
Transparent (CL) HIS-3-BAG-1.5/0.5-PO-X-CL 308-30164
Heat Shrinkable Tubing 3:1 green/yellow in blister bag 1,5/0,5
HIS-3 bag 1.5:0.5 green-yellow, width 112.
Porovnat
Heat Shrinkable Tubing 3:1 green/yellow in blister bag 1,5/0,5
HIS-3-BAG-1.5/0.5-PO-X-GNYE 308-30165
Porovnat
Přidat do sledovaných položek
10 pcs.
Green-Yellow (GNYE) HIS-3-BAG-1.5/0.5-PO-X-GNYE 308-30165
Heat Shrinkable Tubing 3:1 black in blister bags 12/4
HIS-3 bag 12:4 black.
Porovnat
Heat Shrinkable Tubing 3:1 black in blister bags 12/4
HIS-3-BAG-12/4-PO-X-BK 308-31210
Porovnat
Přidat do sledovaných položek
10 pcs.
Black (BK) HIS-3-BAG-12/4-PO-X-BK 308-31210
Heat Shrinkable Tubing 3:1 red in blister bags 12/4
HIS-3 bag 12:4 red, width 112.
Porovnat
Heat Shrinkable Tubing 3:1 red in blister bags 12/4
HIS-3-BAG-12/4-PO-X-RD 308-31211
Porovnat
Přidat do sledovaných položek
10 pcs.
Red (RD) HIS-3-BAG-12/4-PO-X-RD 308-31211
Heat Shrinkable Tubing 3:1 blue in blister bags 12/4
HIS-3 bag 12:4 blue, width 112.
Porovnat
Heat Shrinkable Tubing 3:1 blue in blister bags 12/4
HIS-3-BAG-12/4-PO-X-BU 308-31212
Porovnat
Přidat do sledovaných položek
10 pcs.
Blue (BU) HIS-3-BAG-12/4-PO-X-BU 308-31212
Cable marking carrier Helafix, 35.0x10.00mm, transparent, pack=50pcs.
Multi-purpose identification potential: Helafix HC and HCR.
Porovnat
Cable marking carrier Helafix, 35.0x10.00mm, transparent, pack=50pcs.
HC09-35-EVA-CL 525-10353
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pack
Transparent (CL) HC09-35-EVA-CL 525-10353
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable marking carrier Helafix, 52.0x10.00mm, transparent, pack=50pcs.
Multi-purpose identification potential: Helafix HC and HCR.
Porovnat
Cable marking carrier Helafix, 52.0x10.00mm, transparent, pack=50pcs.
HC09-52-EVA-CL 525-10523
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pack
Transparent (CL) HC09-52-EVA-CL 525-10523
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable marking carrier Helafix, 35.0x13.00mm, transparent, pack=50pcs.
Multi-purpose identification potential: Helafix HC and HCR.
Porovnat
Cable marking carrier Helafix, 35.0x13.00mm, transparent, pack=50pcs.
HC12-35-EVA-CL 525-13353
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pack
Transparent (CL) HC12-35-EVA-CL 525-13353
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable marking carrier Helafix, 52.0x13.00mm, transparent, pack=50pcs.
Multi-purpose identification potential: Helafix HC and HCR.
Porovnat
Cable marking carrier Helafix, 52.0x13.00mm, transparent, pack=50pcs.
HC12-52-EVA-CL 525-13523
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pack
Transparent (CL) HC12-52-EVA-CL 525-13523
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Corrugated tube clip for hole (oval), nom⌀21.0mm, black, 100pcs.
Fixing element for convoluted tubes 22 mm with arrow head for oval holes 6.2 x 12.2 mm.
Porovnat
Corrugated tube clip for hole (oval), nom⌀21.0mm, black, 100pcs.
RCC D21-PA66HIRHS-BK 150-92300
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) RCC D21-PA66HIRHS-BK 150-92300
Cable clip for stud, ⌀6.35 mm, Dmin=12.5mm, Dmax=13.5mm, ⌀5.0 mm
Clips interlock to expand installation options.
Porovnat
Cable clip for stud, ⌀6.35 mm, Dmin=12.5mm, Dmax=13.5mm, ⌀5.0 mm
IPC13P-PA66-BK 151-14132
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) IPC13P-PA66-BK 151-14132
Cable clip for edge, T=1.0 - 3.0mm, Dmin=15mm, Dmax=22mm
EdgeClip cable and tube clips are suitable for the low-vibration routing of cables and tubes with larger bundle diameters.
Porovnat
Cable clip for edge, T=1.0 - 3.0mm, Dmin=15mm, Dmax=22mm
EC27-PA66HIRHS-BK 151-00161
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) EC27-PA66HIRHS-BK 151-00161
Cable clip for hole (round), ⌀4.8 mm
C3-N66-BK.
Porovnat
Cable clip for hole (round), ⌀4.8 mm
C1-PA6HIR-BK 201-10010
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) C1-PA6HIR-BK 201-10010
Cable clip for hole (round), ⌀4.8 mm
C3-N66-BK.
Porovnat
Cable clip for hole (round), ⌀4.8 mm
C3-PA6HIR-BK 201-10030
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) C3-PA6HIR-BK 201-10030
Cable clip for hole (round)
R1 protective strap to hold wires down effortlessly.
Porovnat
Cable clip for hole (round)
R1-PVC-BK 201-20010
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) R1-PVC-BK 201-20010
Cable clip for hole (round)
R1 protective strap to hold wires down effortlessly.
Porovnat
Cable clip for hole (round)
R2-PVC-BK 201-20020
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) R2-PVC-BK 201-20020
Cable clip for hole (round), ⌀5.0 mm, Dmin=4.5mm, Dmax=5.7mm
Klam-Klips KK1 - 4.
Porovnat
Cable clip for hole (round), ⌀5.0 mm, Dmin=4.5mm, Dmax=5.7mm
KK1-PA6HIR-BK 234-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) KK1-PA6HIR-BK 234-10100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for hole (round), ⌀5.0 mm, Dmin=6.5mm, Dmax=7.7mm
Klam-Klips KK1 - 4.
Porovnat
Cable clip for hole (round), ⌀5.0 mm, Dmin=6.5mm, Dmax=7.7mm
KK3-PA6HIR-BK 234-10300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) KK3-PA6HIR-BK 234-10300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Facebook  Instagram  Twitter  YouTube  LinkedIn  Corporate Blog 
Kontakt VOP Impressum Mapa stránek Newsletter Pokyny a závazky Zásady ochrany osobních údajů
Aktualizace: 24/08/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.284) | Aktualizace: 24/08/2025 | Nastavení ochrany osobních údajů
Hledat prodejce Kontakt