Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
29/11/2025

Výsledky pro "D-Clip Series"

Nalezeno 3 292 výrobků 3 dalších položek
Poznámka:  Kombinace hledaných výrazů nevrátila žádné odpovídající výsledky.  Níže jsou výsledky, které odpovídají dílům dle Vašeho vyhledávání.

Typ: Zkuste změnit nebo odstranit výrazy, abyste zlepšili relevanci výsledků vyhledávání.

K dispozici jsou výsledky v následujících kategoriích:
Cable Ties and Fixings

Cable Ties and Fixings  (1930)

Cable Ties Inside Serrated  (455) Cable Ties Outside Serrated  (82) Cable Ties Without Serration  (35) Cable Ties, Releasable  (85) Cable Ties, Stainless Steel  (132) Cable Ties With Fixing Elements  (346) Cable Tie Mounts  (175) Fixing Elements  (142) Clips, Clamps and Plugs  (609)
Cable Ties and Fixings
Cable Ties and Fixings (1930)
Insulation

Insulation  (632)

Heat Shrink Tubing  (288) Heat Shrinkable Moulded Shapes  (333) Insulating tubes  (13)
Insulation
Insulation (632)
Cable Protection Systems

Cable Protection Systems  (180)

Non-Metallic Conduit Systems  (10) Spiral-Reinforced Conduit Systems  (10) Conduit System Accessories  (17) Protective Tubing and Spiral Binding  (20) Expandable Braided Sleeves  (18) Open Woven Sleeves  (18) Grommets  (60) Wiring Ducts and Accessories  (45)
Cable Protection Systems
Cable Protection Systems (180)
Electrical Installation

Electrical Installation  (1)

Industrial Silicones  (1)
Electrical Installation
Electrical Installation (1)
Identification Systems

Identification Systems  (515)

Wire and Cable Markers  (439) Control Panel Labelling  (19) Industrial Identification  (4) RFID tags and cable ties  (52) Security Labeling  (5) Hazardous Area Identification  (1)
Identification Systems
Identification Systems (515)
Application Tooling

Application Tooling  (35)

Automatic Cable Tying System  (1) Application Tooling for Cable Ties  (21) Application Tooling for Snappers  (3) Application Tooling for Non Shrinkable Tubing  (8) Application Tooling for Braided Sleeves  (2)
Application Tooling
Application Tooling (35)
3 292 produkty
Resetovat vše
Fixing tie for edge, outside serrated, ⌀1.5-30.0mm, black/silver, 1000pcs.
Porovnat
Fixing tie for edge, outside serrated, ⌀1.5-30.0mm, black/silver, 1000pcs.
S50SOSEC1.5-4TVE-PP/C75S-BK/SR 126-00465
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK), Silver (SR) S50SOSEC1.5-4TVE-PP/C75S-BK/SR 126-00465
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Fixing tie for edge, outside serrated, ⌀1.5-30.0mm, black/silver, 1000pcs.
Porovnat
Fixing tie for edge, outside serrated, ⌀1.5-30.0mm, black/silver, 1000pcs.
S50SOSEC1.5-4.0SVE-PP/C75S-BK/SR 126-00471
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK), Silver (SR) S50SOSEC1.5-4.0SVE-PP/C75S-BK/SR 126-00471
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>ReSource highlights HellermannTyton products that are made from recycled waste or from virgin materials with relatively lower carbon emissions.
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-2.4/1.2-PO-X-CL 305-02419
Porovnat
Přidat do sledovaných položek
100 m
Transparent (CL) HFT-B-2.4/1.2-PO-X-CL 305-02419
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-19.0/9.5-PO-X-CL 305-19019
Porovnat
Přidat do sledovaných položek
50 metre
Transparent (CL) HFT-B-19.0/9.5-PO-X-CL 305-19019
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-25.4/12.7-PO-X-CL 305-25419
Porovnat
Přidat do sledovaných položek
25 m
Transparent (CL) HFT-B-25.4/12.7-PO-X-CL 305-25419
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-38.0/19.0-PO-X-CL 305-38119
Porovnat
Přidat do sledovaných položek
50 m
Transparent (CL) HFT-B-38.0/19.0-PO-X-CL 305-38119
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-1.6/0.8-PO-X-CL 305-01619
Porovnat
Přidat do sledovaných položek
100 m
Transparent (CL) HFT-B-1.6/0.8-PO-X-CL 305-01619
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-3.2/1.6-PO-X-CL 305-03219
Porovnat
Přidat do sledovaných položek
100 m
Transparent (CL) HFT-B-3.2/1.6-PO-X-CL 305-03219
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-4.8/2.4-PO-X-CL 305-04819
Porovnat
Přidat do sledovaných položek
300 metre
Transparent (CL) HFT-B-4.8/2.4-PO-X-CL 305-04819
Heat Shrinkable Tubing 2:1 flexible and transparent
3:1 shrink ratio tubing is ideal in many applications.
Porovnat
Heat Shrinkable Tubing 2:1 flexible and transparent
HFT-B-12.7/6.4-PO-X-CL 305-12719
Porovnat
Přidat do sledovaných položek
50 m
Transparent (CL) HFT-B-12.7/6.4-PO-X-CL 305-12719
Fluoroelastomer Heat Shrinkable Tubing 2:1 25.4/12.7 black
Viton®-E for flexibility and protection against aggressive chemicals.
Porovnat
Fluoroelastomer Heat Shrinkable Tubing 2:1 25.4/12.7 black
VITON®-E-25.4/12.7-FPMX-BK 330-02540
Porovnat
Přidat do sledovaných položek
25 metre
Black (BK) VITON®-E-25.4/12.7-FPMX-BK 330-02540
Fluoroelastomer Heat Shrinkable Tubing 2:1 38.0/19.0 black
Viton®-E for flexibility and protection against aggressive chemicals.
Porovnat
Fluoroelastomer Heat Shrinkable Tubing 2:1 38.0/19.0 black
VITON®-E-38.0/19.0-FPMX-BK 330-03810
Porovnat
Přidat do sledovaných položek
15 metre
Black (BK) VITON®-E-38.0/19.0-FPMX-BK 330-03810
Fluoroelastomer Heat Shrinkable Tubing 2:1 50.8/25.4 black
Viton®-E for flexibility and protection against aggressive chemicals.
Porovnat
Fluoroelastomer Heat Shrinkable Tubing 2:1 50.8/25.4 black
VITON®-E-50.8/25.4-FPMX-BK 330-05080
Porovnat
Přidat do sledovaných položek
15 metre
Black (BK) VITON®-E-50.8/25.4-FPMX-BK 330-05080
Thin Wall Heat Shrinkable Tubing 3:1 with Adhesive Liner 3/1 black
EPS300 and EPS400 offer high shrink ratios and protection against humidity.
Porovnat
Thin Wall Heat Shrinkable Tubing 3:1 with Adhesive Liner 3/1 black
EPS-300-3/1-PO-X-BK 340-03010
Porovnat
Přidat do sledovaných položek
400 metre
Black (BK) EPS-300-3/1-PO-X-BK 340-03010
Thin Wall Heat Shrinkable Tubing 3:1 with Adhesive Liner 12/4 black
EPS300 and EPS400 offer high shrink ratios and protection against humidity.
Porovnat
Thin Wall Heat Shrinkable Tubing 3:1 with Adhesive Liner 12/4 black
EPS-300-12/4-PO-X-BK 340-12040
Porovnat
Přidat do sledovaných položek
100 metre
Black (BK) EPS-300-12/4-PO-X-BK 340-12040
Thin Wall Heat Shrinkable Tubing 3:1 with Adhesive Liner 24/8 black
EPS300 and EPS400 offer high shrink ratios and protection against humidity.
Porovnat
Thin Wall Heat Shrinkable Tubing 3:1 with Adhesive Liner 24/8 black
EPS-300-24/8-PO-X-BK 340-24080
Porovnat
Přidat do sledovaných položek
25 metre
Black (BK) EPS-300-24/8-PO-X-BK 340-24080
Thin Wall Heat Shrinkable Tubing 3:1 with Adhesive Liner 40/13 black
EPS300 and EPS400 offer high shrink ratios and protection against humidity.
Porovnat
Thin Wall Heat Shrinkable Tubing 3:1 with Adhesive Liner 40/13 black
EPS-300-40/13-PO-X-BK 340-40130
Porovnat
Přidat do sledovaných položek
25 metre
Black (BK) EPS-300-40/13-PO-X-BK 340-40130
Heat Shrink Cable Joint Kit 16-50mm² with Connector Voltage Range 0.6/1 kV
LVK-C: Outer sleeve, inner sleeves, mechanical connectors, cleaning cloth, emery cloth, installation instructions.
Porovnat
Heat Shrink Cable Joint Kit 16-50mm² with Connector Voltage Range 0.6/1 kV
LVK-C-4x16-50-PO-X-BK 380-04016
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) LVK-C-4x16-50-PO-X-BK 380-04016
Heat Shrink Cable Joint Kit 25-150mm² with Connector Voltage Range 0.6/1 kV
LVK-C: Outer sleeve, inner sleeves, mechanical connectors, cleaning cloth, emery cloth, installation instructions.
Porovnat
Heat Shrink Cable Joint Kit 25-150mm² with Connector Voltage Range 0.6/1 kV
LVK-C-4x25-150-PO-X-BK 380-04018
Porovnat
Přidat do sledovaných položek
1 pcs.
Black (BK) LVK-C-4x25-150-PO-X-BK 380-04018
Cable tag, manual marking, 63.0x9.0mm, natural, bag=100pcs.
Porovnat
Cable tag, manual marking, 63.0x9.0mm, natural, bag=100pcs.
AT2-PA66-NA 151-41219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) AT2-PA66-NA 151-41219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable grommet, ⌀19.0 mm, black, 500pcs.
Edge Protection Grommet - HV1101.
Porovnat
Cable grommet, ⌀19.0 mm, black, 500pcs.
HV1101-PVC-FR-BK 633-01010
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) HV1101-PVC-FR-BK 633-01010
Cable grommet, ⌀12.0 mm, black, 1000pcs.
Edge Protection Grommet - HV1204.
Porovnat
Cable grommet, ⌀12.0 mm, black, 1000pcs.
HV1204-PVC-FR-BK 633-02040
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) HV1204-PVC-FR-BK 633-02040
Cable grommet, ⌀9.0 mm, black, 1000pcs.
Edge Protection Grommet - HV1210.
Porovnat
Cable grommet, ⌀9.0 mm, black, 1000pcs.
HV1210-PVC-FR-BK 633-02100
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) HV1210-PVC-FR-BK 633-02100
Cable grommet, ⌀10.0 mm, black, 1000pcs.
Edge Protection Grommet - HV1218.
Porovnat
Cable grommet, ⌀10.0 mm, black, 1000pcs.
HV1218-PVC-FR-BK 633-02180
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) HV1218-PVC-FR-BK 633-02180
Cable grommet, ⌀9.0 mm, black, 1000pcs.
Bend Protection Grommet - HV2101.
Porovnat
Cable grommet, ⌀9.0 mm, black, 1000pcs.
HV2101-PVC-FR-BK 632-01010
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) HV2101-PVC-FR-BK 632-01010
Cable marking carrier Helafix, 35.0x10.00mm, transparent, pack=50pcs.
Multi-purpose identification potential: Helafix HC and HCR.
Porovnat
Cable marking carrier Helafix, 35.0x10.00mm, transparent, pack=50pcs.
HC09-35-EVA-CL 525-10353
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Transparent (CL) HC09-35-EVA-CL 525-10353
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Bundling clip for stud, L=55.0mm, SO=22.8mm, black, 1000pcs.
The slim line BC series is particularly compact and flexible.
Porovnat
Bundling clip for stud, L=55.0mm, SO=22.8mm, black, 1000pcs.
BC2212-PA66HIRHS-BK 151-00017
Porovnat
Přidat do sledovaných položek
1000 pcs.
Black (BK) BC2212-PA66HIRHS-BK 151-00017
Cable clip, T=0.7 - 6.35mm, ⌀6.6 mm, Dmin=6.0mm, Dmax=7.6mm
The SC6.6 for solar cables is ideal for quick installation and easy maintenance.
Porovnat
Cable clip, T=0.7 - 6.35mm, ⌀6.6 mm, Dmin=6.0mm, Dmax=7.6mm
SC6.6-PA66HIRHSUV-BK 151-00927
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) SC6.6-PA66HIRHSUV-BK 151-00927
Cable clip for edge, T=1.0 - 3.0mm, Dmin=15mm, Dmax=22mm
EdgeClip cable and tube clips are suitable for the low-vibration routing of cables and tubes with larger bundle diameters.
Porovnat
Cable clip for edge, T=1.0 - 3.0mm, Dmin=15mm, Dmax=22mm
EC27-PA66HIRHS-BK 151-00161
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) EC27-PA66HIRHS-BK 151-00161
Cable clip for hole (round), ⌀4.8 mm
C3-N66-BK.
Porovnat
Cable clip for hole (round), ⌀4.8 mm
C1-PA6HIR-BK 201-10010
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) C1-PA6HIR-BK 201-10010
Cable clip for hole (round), ⌀5.0 mm, Dmin=5.5mm, Dmax=6.7mm
Klam-Klips KK1 - 4.
Porovnat
Cable clip for hole (round), ⌀5.0 mm, Dmin=5.5mm, Dmax=6.7mm
KK2-PA6HIR-BK 234-10200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) KK2-PA6HIR-BK 234-10200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for hole (round), ⌀5.0 mm, Dmin=7.5mm, Dmax=8.5mm
Klam-Klips KK1 - 4.
Porovnat
Cable clip for hole (round), ⌀5.0 mm, Dmin=7.5mm, Dmax=8.5mm
KK4-PA6HIR-BK 234-10400
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) KK4-PA6HIR-BK 234-10400
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, natural, 100pcs.
ALU12-AL-NA 211-10120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU12-AL-NA 211-10120
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, natural, 100pcs.
ALU13-AL-NA 211-10130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU13-AL-NA 211-10130
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C P-Clamp with chloroprene insert.
Porovnat
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Porovnat
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Porovnat
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Connector clip for hole (oval), EWCAP-005-23, black, 3500pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Porovnat
Connector clip for hole (oval), EWCAP-005-23, black, 3500pcs.
CCOVAL3-PA66HIRHSUV-BK 151-01244
Porovnat
Přidat do sledovaných položek
3500 pcs.
Black (BK) CCOVAL3-PA66HIRHSUV-BK 151-01244
Connector clip for hole (oval), black, 5000pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Porovnat
Connector clip for hole (oval), black, 5000pcs.
CCOVAL4-PA66HIRHSUV-BK 151-01246
Porovnat
Přidat do sledovaných položek
5000 pcs.
Black (BK) CCOVAL4-PA66HIRHSUV-BK 151-01246
Cable tag, manual marking, 63.5x19.3mm, white, pack=100pcs.
Unlimited cable bundle diameters can be securely identified.
Porovnat
Cable tag, manual marking, 63.5x19.3mm, white, pack=100pcs.
IMP2.5-PA66-WH 151-42259
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) IMP2.5-PA66-WH 151-42259
Cable tag, manual marking, 88.9x19.3mm, white, pack=100pcs.
Unlimited cable bundle diameters can be securely identified.
Porovnat
Cable tag, manual marking, 88.9x19.3mm, white, pack=100pcs.
IMP3.5-PA66-WH 151-42359
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) IMP3.5-PA66-WH 151-42359
Cable tag, manual marking, 44.0x19.0mm, natural, bag=100pcs.
Unlimited cable bundle diameters can be securely identified.
Porovnat
Cable tag, manual marking, 44.0x19.0mm, natural, bag=100pcs.
IT1-PA66-NA 151-42119
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) IT1-PA66-NA 151-42119
Stainless steel cable tie, folding, 230x10.26mm, ⌀25.0-60mm, black, 100pcs.
MLT-Series. Releasable stainless steel buckle tie with and without coating.
Porovnat
Stainless steel cable tie, folding, 230x10.26mm, ⌀25.0-60mm, black, 100pcs.
MLT8SSC10-SS316L/SP-BK 111-91001
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) MLT8SSC10-SS316L/SP-BK 111-91001
Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.
Porovnat
Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.
SSPC4-SS316L-ML 151-00837
Porovnat
Přidat do sledovaných položek
100 pcs.
Metal (ML) SSPC4-SS316L-ML 151-00837
Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.
Porovnat
Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.
SSPC5-SS316L-ML 151-00838
Porovnat
Přidat do sledovaných položek
100 pcs.
Metal (ML) SSPC5-SS316L-ML 151-00838
Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.
Porovnat
Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.
SSPC6-SS316L-ML 151-00839
Porovnat
Přidat do sledovaných položek
100 pcs.
Metal (ML) SSPC6-SS316L-ML 151-00839
Fixing tie for stud, inside serrated, ⌀2.0-45.0mm, black, 250pcs.
Cable ties with various weld stud fixing methods.
Porovnat
Fixing tie for stud, inside serrated, ⌀2.0-45.0mm, black, 250pcs.
T50RSB5-PA66/POM-BK 156-00742
Porovnat
Přidat do sledovaných položek
250 pcs.
Black (BK) T50RSB5-PA66/POM-BK 156-00742
Fixing tie for stud, outside serrated, ⌀4.0-35.0mm, black, 250pcs.
Cable ties with various weld stud fixing methods.
Porovnat
Fixing tie for stud, outside serrated, ⌀4.0-35.0mm, black, 250pcs.
T50SOSSBS5-PA66HS-BK 156-01746
Porovnat
Přidat do sledovaných položek
250 pcs.
Black (BK) T50SOSSBS5-PA66HS-BK 156-01746
Fixing tie for stud, outside serrated, ⌀32.0mm, black, 500pcs.
Cable ties with various weld stud fixing methods.
Porovnat
Fixing tie for stud, outside serrated, ⌀32.0mm, black, 500pcs.
T50SOSSBH5-PA66HS-BK 156-01744
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50SOSSBH5-PA66HS-BK 156-01744
Fixing tie for edge, inside serrated, ⌀4.0-40.0mm, black, 500pcs.
The holding tab increases the tensile strength additionaly.
Porovnat
Fixing tie for edge, inside serrated, ⌀4.0-40.0mm, black, 500pcs.
T50REC2.5B-PA66HS/PA66HIRHS-BK 150-45292
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50REC2.5B-PA66HS/PA66HIRHS-BK 150-45292
Fixing tie for edge, outside serrated, ⌀5.0-50.0mm, black, 500pcs.
The holding tab increases the tensile strength additionaly.
Porovnat
Fixing tie for edge, outside serrated, ⌀5.0-50.0mm, black, 500pcs.
T50ROSEC2.5A-PA66HS/PA66HIRHS-BK 150-45299
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) T50ROSEC2.5A-PA66HS/PA66HIRHS-BK 150-45299
Fixing tie for hole (round), inside serrated, ⌀9.5-82.5mm, black, 100pcs.
Friction tab inside the fir tree allows the 120lb. tensile strength wide-strap cable tie to sit in mount without falling out prior to installation.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀9.5-82.5mm, black, 100pcs.
WSIFT9A-PA66HIRHSUV-BK 156-00069
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) WSIFT9A-PA66HIRHSUV-BK 156-00069
Fixing tie for hole (round), inside serrated, ⌀9.5-105.0mm, black, 100pcs.
Friction tab inside the fir tree allows the 120lb. tensile strength wide-strap cable tie to sit in mount without falling out prior to installation.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀9.5-105.0mm, black, 100pcs.
WSRFT9A-PA66HIRHSUV-BK 156-00070
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) WSRFT9A-PA66HIRHSUV-BK 156-00070
Fixing tie for hole (round), inside serrated, ⌀57.0mm, black, 100pcs.
Friction tab inside the fir tree allows the 120lb. tensile strength wide-strap cable tie to sit in mount without falling out prior to installation.
Porovnat
Fixing tie for hole (round), inside serrated, ⌀57.0mm, black, 100pcs.
WSSFT9B-PA66HIRHSUV-BK 156-00072
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) WSSFT9B-PA66HIRHSUV-BK 156-00072
RFID label, 860-960 MHz (UHF), white, 45.00x18.00mm, 5000pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Porovnat
RFID label, 860-960 MHz (UHF), white, 45.00x18.00mm, 5000pcs.
TAG45x18T1UHF-1601-WH 556-00839
Porovnat
Přidat do sledovaných položek
5000 pcs.
White (WH) TAG45x18T1UHF-1601-WH 556-00839
RFID label, 860-960 MHz (UHF), white, 73.00x13.00mm, 5000pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Porovnat
RFID label, 860-960 MHz (UHF), white, 73.00x13.00mm, 5000pcs.
TAG73x13T1UHF-1601-WH 556-00840
Porovnat
Přidat do sledovaných položek
5000 pcs.
White (WH) TAG73x13T1UHF-1601-WH 556-00840
RFID label, 860-960 MHz (UHF), white, 44.00x44.00mm, 2000pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Porovnat
RFID label, 860-960 MHz (UHF), white, 44.00x44.00mm, 2000pcs.
TAGS44T1UHF-1601-WH 556-00845
Porovnat
Přidat do sledovaných položek
2000 pcs.
White (WH) TAGS44T1UHF-1601-WH 556-00845
RFID label, 860-960 MHz (UHF), white, 110.00x13.00mm, 800pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Porovnat
RFID label, 860-960 MHz (UHF), white, 110.00x13.00mm, 800pcs.
TAG110x13T1UHFM-1601-WH 556-00841
Porovnat
Přidat do sledovaných položek
800 pcs.
White (WH) TAG110x13T1UHFM-1601-WH 556-00841
RFID label, 860-960 MHz (UHF), white, 54.00x24.00mm, 450pcs.
RFID HF labels for easy inventory and asset management.
Porovnat
RFID label, 860-960 MHz (UHF), white, 54.00x24.00mm, 450pcs.
TAG54x24T1UHFM-1601-WH 556-00844
Porovnat
Přidat do sledovaných položek
450 pcs.
White (WH) TAG54x24T1UHFM-1601-WH 556-00844
RFID label, 860-960 MHz (UHF), white, 55.00x14.00mm, 800pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Porovnat
RFID label, 860-960 MHz (UHF), white, 55.00x14.00mm, 800pcs.
TAG55x14T1UHFM-1601-WH 556-00842
Porovnat
Přidat do sledovaných položek
800 pcs.
White (WH) TAG55x14T1UHFM-1601-WH 556-00842
RFID label, 860-960 MHz (UHF), white, 250.00x33.00mm, 500pcs.
RFID bundling label TAG250x33T1UHF – temporary unique identification of cable and wire harnesses.
Porovnat
RFID label, 860-960 MHz (UHF), white, 250.00x33.00mm, 500pcs.
TAG250x33T1UHF-1603-WH 556-00846
Porovnat
Přidat do sledovaných položek
500 pcs.
White (WH) TAG250x33T1UHF-1603-WH 556-00846
RFID label, 860-960 MHz (UHF), white, 130.00x50.00mm, 1000pcs.
Wide range of RFID labels in different sizes, formats or frequencies (LF, HF, UHF).
Porovnat
RFID label, 860-960 MHz (UHF), white, 130.00x50.00mm, 1000pcs.
TAG130x50T1UHF-1603-WH 556-00847
Porovnat
Přidat do sledovaných položek
1000 pcs.
White (WH) TAG130x50T1UHF-1603-WH 556-00847
Fixing tie for hole (oval), inside serrated, ⌀2.5-45.0mm, grey, 500pcs.
T50RFT62X122-HR - Being a two-piece assembly allows the tie head to be located in the most convenient position.
Porovnat
Fixing tie for hole (oval), inside serrated, ⌀2.5-45.0mm, grey, 500pcs.
T50RFT62x122HR-PA46-GY 156-00446
Porovnat
Přidat do sledovaných položek
500 pcs.
Grey (GY) T50RFT62x122HR-PA46-GY 156-00446
Cable tie mount for adhesive use, Wmax=4.8mm, Adhesive, black, 50pcs.
Self-adhesive cable tie mount with 360° rotatable design.
Porovnat
Cable tie mount for adhesive use, Wmax=4.8mm, Adhesive, black, 50pcs.
SMB4APT-A-PA66HS/A-BK 151-03334
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) SMB4APT-A-PA66HS/A-BK 151-03334
Cable tie mount for adhesive use, Wmax=4.8mm, Adhesive, black, 50pcs.
Self-adhesive cable tie mount with 360° rotatable design.
Porovnat
Cable tie mount for adhesive use, Wmax=4.8mm, Adhesive, black, 50pcs.
SMB4APT-A-PA66HS/A-BK 151-03364
Porovnat
Přidat do sledovaných položek
50 pcs.
Black (BK) SMB4APT-A-PA66HS/A-BK 151-03364
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, black, 100pcs.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm
Porovnat
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, black, 100pcs.
CL8-PA66W-BK 151-02259
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) CL8-PA66W-BK 151-02259
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=2.5mm, ⌀3.7 mm, M3 Screw, natural, 500pcs.
FH Cable Tie Mounts for areas with limited space.
Porovnat
Cable tie mount for screw fixation, Wmax=2.5mm, ⌀3.7 mm, M3 Screw, natural, 500pcs.
FH18-PA66-NA 151-61119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
500 pcs.
Natural (NA) FH18-PA66-NA 151-61119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=3.5mm, ⌀5.5 mm, natural, 500pcs.
FH Cable Tie Mounts for areas with limited space.
Porovnat
Cable tie mount for screw fixation, Wmax=3.5mm, ⌀5.5 mm, natural, 500pcs.
FH30-PA66-NA 151-61319
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
500 pcs.
Natural (NA) FH30-PA66-NA 151-61319
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=7.6mm, ⌀6.0 mm, natural, 100pcs.
LKM / CL8 Cable Tie Mounts with curved design.
Porovnat
Cable tie mount for screw fixation, Wmax=7.6mm, ⌀6.0 mm, natural, 100pcs.
LKM-PA66-NA 151-26304
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) LKM-PA66-NA 151-26304
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=13.0mm, ⌀6.0 mm, M6 Screw, natural, 100pcs.
Porovnat
Cable tie mount for screw fixation, Wmax=13.0mm, ⌀6.0 mm, M6 Screw, natural, 100pcs.
LKCSF1-PA66-NA 151-27219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) LKCSF1-PA66-NA 151-27219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=13.0mm, ⌀6.0 mm, M6 Screw, black, 100pcs.
Porovnat
Cable tie mount for screw fixation, Wmax=13.0mm, ⌀6.0 mm, M6 Screw, black, 100pcs.
LKCSF1-PA66-BK 151-27202
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) LKCSF1-PA66-BK 151-27202
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀3.8 mm, #6 (M3) Screw, white, 100pcs.
Porovnat
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀3.8 mm, #6 (M3) Screw, white, 100pcs.
CTM0-PA66-WH 151-30303
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) CTM0-PA66-WH 151-30303
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.8 mm, #8 (M4) Screw, white, 100pcs.
Porovnat
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.8 mm, #8 (M4) Screw, white, 100pcs.
CTM1-PA66-WH 151-30404
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) CTM1-PA66-WH 151-30404
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, black, 100pcs.
Porovnat
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, black, 100pcs.
CTM3-PA66-BK 151-30600
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) CTM3-PA66-BK 151-30600
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, white, 100pcs.
Porovnat
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, white, 100pcs.
CTM3-PA66-WH 151-30605
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) CTM3-PA66-WH 151-30605
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀6.4 mm, #1/4" (M6) Screw, black, 100pcs.
Porovnat
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀6.4 mm, #1/4" (M6) Screw, black, 100pcs.
CTM4-PA66-BK 151-30700
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) CTM4-PA66-BK 151-30700
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀6.4 mm, #1/4" (M6) Screw, white, 100pcs.
Porovnat
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀6.4 mm, #1/4" (M6) Screw, white, 100pcs.
CTM4-PA66-WH 151-30703
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
White (WH) CTM4-PA66-WH 151-30703
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀7.8 mm, ⌀7.9 mm, 5/16" (M8) Screw, black, 100pcs.
Mount and tie combination makes it easy to service bundles in the field.
Porovnat
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀7.8 mm, ⌀7.9 mm, 5/16" (M8) Screw, black, 100pcs.
HDM312-PA66HIRHSUV-BK 151-00439
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) HDM312-PA66HIRHSUV-BK 151-00439
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.31 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.
Mount and tie combination makes it easy to service bundles in the field.
Porovnat
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.31 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.
HDM320-PA66HIRHSUV-BK 151-02094
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) HDM320-PA66HIRHSUV-BK 151-02094
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.5 mm, M4 Screw, natural, 100pcs.
Secures with a single screw, providing quick installation.
Porovnat
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.5 mm, M4 Screw, natural, 100pcs.
CTQM5-PA66-NA 151-10920
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Natural (NA) CTQM5-PA66-NA 151-10920
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.5 mm, M4 Screw, black, 100pcs.
Secures with a single screw, providing quick installation.
Porovnat
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.5 mm, M4 Screw, black, 100pcs.
CTQM5-PA66-BK 151-10930
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Porovnat
Přidat do sledovaných položek
100 pcs.
Black (BK) CTQM5-PA66-BK 151-10930
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for edge, T=1.0 - 3.0mm, black, 500pcs.
Porovnat
Cable tie mount for edge, T=1.0 - 3.0mm, black, 500pcs.
EC33-PA66HIRHS-BK 151-00192
Porovnat
Přidat do sledovaných položek
500 pcs.
Black (BK) EC33-PA66HIRHS-BK 151-00192
Heat Shrinkable Tubing 2:1 VG-Norm 1,2/0,6 brown
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 1,2/0,6 brown
HFT-A-1.2/0.6-PO-X-BN 305-01201
Porovnat
Přidat do sledovaných položek
100 metre
Brown (BN) HFT-A-1.2/0.6-PO-X-BN 305-01201
Heat Shrinkable Tubing 2:1 VG-Norm 1.6/0.8 brown
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 1.6/0.8 brown
HFT-A-1.6/0.8-PO-X-BN 305-01601
Porovnat
Přidat do sledovaných položek
100 metre
Brown (BN) HFT-A-1.6/0.8-PO-X-BN 305-01601
Heat Shrinkable Tubing 2:1 1.6/0.8 green
Porovnat
Heat Shrinkable Tubing 2:1 1.6/0.8 green
HFT-A-1.6/0.8-PO-X-GN 305-01605
Porovnat
Přidat do sledovaných položek
100 metre
Green (GN) HFT-A-1.6/0.8-PO-X-GN 305-01605
Heat shrinkable tubing 2:1 - flexible and coloured
Porovnat
Heat shrinkable tubing 2:1 - flexible and coloured
HFT-A-2.4/1.2-PO-X-BN 305-02401
Porovnat
Přidat do sledovaných položek
100 m
Brown (BN) HFT-A-2.4/1.2-PO-X-BN 305-02401
Heat Shrinkable Tubing 2:1 VG-Norm 3.2/1.6 brown
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 3.2/1.6 brown
HFT-A-3.2/1.6-PO-X-BN 305-03201
Porovnat
Přidat do sledovaných položek
400 metre
Brown (BN) HFT-A-3.2/1.6-PO-X-BN 305-03201
Heat Shrinkable Tubing 2:1 3.2/1.6 green
Porovnat
Heat Shrinkable Tubing 2:1 3.2/1.6 green
HFT-A-3.2/1.6-PO-X-GN 305-03205
Porovnat
Přidat do sledovaných položek
400 metre
Green (GN) HFT-A-3.2/1.6-PO-X-GN 305-03205
Heat shrinkable tubing 2:1 - flexible and coloured
Porovnat
Heat shrinkable tubing 2:1 - flexible and coloured
HFT-A-4.8/2.4-PO-X-BN 305-04801
Porovnat
Přidat do sledovaných položek
300 m
Brown (BN) HFT-A-4.8/2.4-PO-X-BN 305-04801
Heat Shrinkable Tubing 2:1 4.8/2.4 grey
HFT-A conforms to major standards (VG) used in all Defence industries.
Porovnat
Heat Shrinkable Tubing 2:1 4.8/2.4 grey
HFT-A-4.8/2.4-PO-X-GY 305-04808
Porovnat
Přidat do sledovaných položek
300 metre
Grey (GY) HFT-A-4.8/2.4-PO-X-GY 305-04808
Heat Shrinkable Tubing 2:1 6.4/3.2 green
Porovnat
Heat Shrinkable Tubing 2:1 6.4/3.2 green
HFT-A-6.4/3.2-PO-X-GN 305-06405
Porovnat
Přidat do sledovaných položek
300 metre
Green (GN) HFT-A-6.4/3.2-PO-X-GN 305-06405
Heat Shrinkable Tubing 2:1 VG-Norm 9.5/4.8 green
Porovnat
Heat Shrinkable Tubing 2:1 VG-Norm 9.5/4.8 green
HFT-A-9.5/4.8-PO-X-GN 305-09505
Porovnat
Přidat do sledovaných položek
150 metre
Green (GN) HFT-A-9.5/4.8-PO-X-GN 305-09505
Facebook  Instagram  Twitter  YouTube  LinkedIn  Corporate Blog 
Kontakt VOP Impressum Mapa stránek Newsletter Pokyny a závazky Zásady ochrany osobních údajů
Aktualizace: 13/11/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.291.4) | Aktualizace: 13/11/2025 | Nastavení ochrany osobních údajů
Hledat prodejce Kontakt