Visit the website for your country to get more information and discover our products.

20/02/2026

Thin Wall Heat Shrinkable Tubing 3:1 with Adhesive Liner 3/1 black
Art.-No. 340-03010 | EPS-300-3/1-PO-X-BK

EPS300 and EPS400 offer high shrink ratios and protection against humidity.

Heat Shrink Tubing 3:1 with adhesive

EPS-300 is a flexible and thin wall heat shrink tubing with a co-extruded hot melt adhesive inner wall.
They have high shrink ratios which makes them ideally suited for shrinking onto components with highly varying diameters.
The adhesive flows well to provide an environmental sealing of complex parts and protect against moisture.

Add to watchlist

More products in this product group:

Heat shrinkable tubing adhesive lined >

Base Data

Application	Heatshrinable tubing EPS seals and protects a wide variety of electrical applications like back end connector sealing, connector-to-cable transitions and splices.
Behaviour At Low Temperature	not cracking
Behaviour at low Temperature test method	IEC 60684-2
Brand Family	EPS-300-Series
Color	Black (BK)
Heat Shock Elongation	480%
Heat Shock Tensile Strength	12MPa
Heat Shock Test	4h/200°C
Heat shock test test method	IEC 60684-2
PART DESCRIPTION	EPS-300-3/1-PO-X-BK
Packaging Type	meter
Part No.	340-03010
Product family	Insulation
Type	EPS-300-3/1

Product Dimensions


For Object Outside Diameter	1.4-2.6 mm
Longitudinal Change After Shrinkage	-5% max.
Printable	No
Recovered Diameter (metric)	1.0mm
Shrink Ratio	3:1
Supplied Diameter (metric)	3.0mm
Volume Resistance	10¹² Ω cm
Wall Thickness (metric)	1.00mm

Downloads

Material and Specifications

Adhesive	Hot melt adhesive
Dielectric Strength	45kV/mm
Dielectric Strength test method	IEC 60684-2
Elongation at break (min.)	450%
Elongation at break test method	IEC 60684-2
Halogen Free	No
Material	PO-X
Material	Polyolefin, cross-linked (PO-X)
Min. Shrink Temperature	+248 °F (+120 °C)
Operating Temperature	-67°F to +257°F (-55°C to +125°C)
REACH Conformity	No
ROHS compliant	Yes
Test Method Tensile Strength	IEC 60684-2
UL Recognized (US)	No
Volume Resistance test method	IEC 60684-2

Logistic and Packaging


Packaging 1 - Weight (kg)	4.1008kg
Pkg. Qty.	400m

More Information

Calculators

Calculator tool for Heat Shrink Tubing

Calculator tool for Heat Shrink Tubing

for EPS-300-3/1 - Art.-No.: 340-03010
In selecting the right shrink tubing size it is important to consider to "80:20 rule". Shrink tubing should recover at least 20% and maximum 80% of its potential shrink range.
According to which specification would you like to check if the selected product is suitable for your application?

diameter

Please enter either the smallest and/or the largest outer diameter of the substrate.

Min mm Max mm

Cross-Section

Please enter either the smallest and/or largest cross-section of the object to be covered.

Min mm² Max mm²

perimeter

Please enter either the smallest and/or largest perimeter of the object to be covered.

Min mm Max mm
Wall thickness calculator

Wall thickness calculator

for EPS-300-3/1 - Art.-No.: 340-03010

Depending on the substrate dimensions when Heat shrink tubing is recovered the diameter and the wall thickness will change. This Calculator aims to offer a theoretical wall thickness for this situation.Please enter the outer diameter of the object to be covered

Outer diameter of object (A)

mm

Inner diameter of tubing after shrinking (B)

mm

Wall thickness fully recovered ( C )

mm

Solutions

Contact Terms of Service Imprint Guidelines and commitments Privacy Policy Cookie Policy

Update: 14/02/2026 © HellermannTyton 2026

© HellermannTyton 2026 (v4.298.2) | Update: 14/02/2026 | Privacy Settings

‹ › ×