Heat shrink marker, flame retardant/chemical resistance, thermal transfer print, continuous, 12.0mm/4.0mm, white, 54m
Art.-No. 553-31251 | TCGT12-4WH-PO-X-WH

The TCGT series of 3:1 commercial grade, thin walled and highly flexible heatshrink tubing is compliant to CSA standards.
TCGT’s polyolefin compound has good mechanical strength and resistance to organic solvents and chemicals.
The surface of the tubing has been especially prepared so that print performance is excellent at all times.
TCGT is supplied in convenient storage boxes that enables the users to keep the tube dirt and dust free and easy to store.
Print with HellermannTyton's premium range of thermal printers and ribbons.
Optimum shrink performance is achieved by following the 80/20 rule.
The tubing must shrink by at least 20% and not more than 80% of its complete shrinkage capacity to achieve the best results.
This will ensure the printed marker remains firmly in place once shrunk onto the substrate.
Industry standard colours are available with special colours possible on request.

More products in this product group:

Application	TCGT is a commercial grade 3:1 heat shrink marker material supplied as a continuous tube and printable on both sides. TCGT’s polyolefin compound has good mechanical strength and resistance to organic solvents and chemicals. The surface of the tubing has been especially prepared so that print performance is excellent at all times. HellermannTyton's printer range allow users to create a high quality print. In addition it is possible to either perforate the tubing at pre-determined lengths or fully sever the markers.
Behaviour at low Temperature test method	ASTM D2671
Brand Family	TCGT
Color	White (WH)
Heat Aging Test	168h/175°C
Heat Aging test method	ASTM D638
Heat Shock Test	4h/250°C
Key product features	flame retardant, chemical resistance, UV resistant
PART DESCRIPTION	TCGT12-4WH-PO-X-WH
Packaging Type	carton
Print Method	thermal transfer print
Print Method (Alternative)	laser beam print
Product family	Identification Systems
Type	TCGT12-4WH


Longitudinal Change After Shrinkage	-15% max.
Longitudinal Change After Shrinkage	ASTM D2671
Printable	Yes
Recovered Diameter (metric)	4.0mm
Shrink Ratio	3:1
Supplied Diameter (metric)	12.0mm
Volume Resistance	10¹⁶ Ω cm
Wall Thickness (metric)	0.68mm

Dielectric Strength	20kV/mm
Dielectric Strength test method	ASTM D2671
Elongation at break (min.)	300%
Elongation at break test method	ASTM D638
Halogen Free	No
Material	PO-X
Material	Polyolefin, cross-linked (PO-X)
Min. Shrink Temperature	+194 °F (+90 °C)
Operating Temperature	-67°F to +275°F (-55°C to +135°C)
REACH Conformity	No
ROHS compliant	Yes
Reel Variant	continuous
Test Method Tensile Strength	ASTM D638
UL Listed (US and Canada)	No
US MILSPEC	MIL-STD-202H Method 215K
Volume Resistance test method	ASTM D257