Visit the website for your country to get more information and discover our products.
Proceed
25/07/2026

Results for "Cable Clamp" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

3,377 products
Reset all
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU10C-CR/AL-BK 211-15100
Compare
Add to watchlist
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) ALU10C-CR/AL-BK 211-15100
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for hole (round), ⌀5.0 mm, Dmin=7.5mm, Dmax=8.5mm
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Klam-Klips KK1 - 4.
Compare
KK4-PA6HIR-BK 234-10400
Compare
Add to watchlist
Klam-Klips KK1 - 4.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) KK4-PA6HIR-BK 234-10400
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=3.2mm, ⌀4.2 mm, natural, 1000pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
H1P-PA66-NA 211-60019
Compare
Add to watchlist
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
Add to watchlist
1000 pcs.
Natural (NA) H1P-PA66-NA 211-60019
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, natural, 1000pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
H6P-PA66-NA 211-60069
Compare
Add to watchlist
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
Add to watchlist
1000 pcs.
Natural (NA) H6P-PA66-NA 211-60069
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=9.5mm, ⌀4.2 mm, natural, 1000pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
H5P-PA66-NA 211-60059
Compare
Add to watchlist
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
Add to watchlist
1000 pcs.
Natural (NA) H5P-PA66-NA 211-60059
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=6.5mm, ⌀4.2 mm, natural, 1000pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
H3P-PA66-NA 211-60039
Compare
Add to watchlist
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
Add to watchlist
1000 pcs.
Natural (NA) H3P-PA66-NA 211-60039
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, natural, 1000pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
H4P-PA66-NA 211-60049
Compare
Add to watchlist
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
Add to watchlist
1000 pcs.
Natural (NA) H4P-PA66-NA 211-60049
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=5.0mm, ⌀4.2 mm, natural, 1000pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
H2P-PA66-NA 211-60029
Compare
Add to watchlist
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
Add to watchlist
1000 pcs.
Natural (NA) H2P-PA66-NA 211-60029
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for edge, black, 200pcs.
Beam Clamp for Edges 7.0 - 8.5 mm.
Compare
Beam Clamp B-PA6GF30-BK 151-00822
Compare
Add to watchlist
Beam Clamp for Edges 7.0 - 8.5 mm.
Compare
Compare
Add to watchlist
200 pcs.
Black (BK) Beam Clamp B-PA6GF30-BK 151-00822
Corrugated tube clip, black, 150pcs.
The cable guide standoff stands off bundles from frame rails, providing clearance from bolts and other protrusions for protection against abrasion.
Compare
CGS2-PA66HIRHS-BK 133-00285
Compare
Add to watchlist
The cable guide standoff stands off bundles from frame rails, providing clearance from bolts and other protrusions for protection against abrasion.
Compare
Compare
Add to watchlist
1 pcs.
Black (BK) CGS2-PA66HIRHS-BK 133-00285
Stainless steel cable tie, ball bearing lock, 681x12.3mm, ⌀17-100mm, metal, 50pcs.
Double wrap stainless steel cable ties, uncoated MBT_UHD.
Compare
MBT27XHD-SS316L-ML 111-01307
Compare
Add to watchlist
Double wrap stainless steel cable ties, uncoated MBT_UHD.
Compare
Compare
Add to watchlist
50 pcs.
Metal (ML) MBT27XHD-SS316L-ML 111-01307
Stainless steel cable tie, folding, 430x10.26mm, ⌀25.0-120mm, black, 100pcs.
MLT-Series. Releasable stainless steel buckle tie with and without coating.
Compare
MLT16SSC10-SS316L/SP-BK 111-91163
Compare
Add to watchlist
MLT-Series. Releasable stainless steel buckle tie with and without coating.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) MLT16SSC10-SS316L/SP-BK 111-91163
Stainless steel cable tie, folding, 630x10.26mm, ⌀25.0-180mm, black, 50pcs.
MLT-Series. Releasable stainless steel buckle tie with and without coating.
Compare
MLT24SSC10-SS316/SP-BK 111-00149
Compare
Add to watchlist
MLT-Series. Releasable stainless steel buckle tie with and without coating.
Compare
Compare
Add to watchlist
50 pcs.
Black (BK) MLT24SSC10-SS316/SP-BK 111-00149
Stainless steel cable tie, ball bearing lock, 681x7.9mm, ⌀17-203mm, black, 50pcs.
Stainless steel cable ties, coated, MBT_SFC, MBT_HFC.
Compare
MBT27HFC-SS316L/SP-BK 111-00297
Compare
Add to watchlist
Stainless steel cable ties, coated, MBT_SFC, MBT_HFC.
Compare
Compare
Add to watchlist
50 pcs.
Black (BK) MBT27HFC-SS316L/SP-BK 111-00297
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
Edge Clip applies easily to plastic and metal sheets without the need for a mounting hole
Compare
T50SOSEC12E-PA66HS-BK 148-00200
Compare
Add to watchlist
Edge Clip applies easily to plastic and metal sheets without the need for a mounting hole
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) T50SOSEC12E-PA66HS-BK 148-00200
Stainless steel cable tie, ball bearing lock, 838x7.9mm, ⌀17-254mm, black, 50pcs.
Stainless steel cable ties, coated, MBT_SFC, MBT_HFC.
Compare
MBT33HFC-SS316L/SP-BK 111-00298
Compare
Add to watchlist
Stainless steel cable ties, coated, MBT_SFC, MBT_HFC.
Compare
Compare
Add to watchlist
50 pcs.
Black (BK) MBT33HFC-SS316L/SP-BK 111-00298
Stainless steel cable tie, ball bearing lock, 1092x12.3mm, ⌀17-330mm, black, 25pcs.
Stainless steel cable ties, coated, MBT_XHFC.
Compare
MBT43XHFC-SS316L/SP-BK 111-01503
Compare
Add to watchlist
Stainless steel cable ties, coated, MBT_XHFC.
Compare
Compare
Add to watchlist
25 pcs.
Black (BK) MBT43XHFC-SS316L/SP-BK 111-01503
Stainless steel cable tie, punch lock, 500x5.9mm, ⌀5-145mm, metal, 100pcs.
Metal cable ties MST-Series.
Compare
MST500S-SS304-ML 111-01551
Compare
Add to watchlist
Metal cable ties MST-Series.
Compare
Compare
Add to watchlist
100 pcs.
Metal (ML) MST500S-SS304-ML 111-01551
Stainless steel cable tie, ball bearing lock, 201x4.6mm, ⌀17-50mm, black, 100pcs.
Compare
MBT8SFC-SS316L/SP-BK 111-00289
Compare
Add to watchlist
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) MBT8SFC-SS316L/SP-BK 111-00289
Stainless steel cable tie, ball bearing lock, 681.0x16.0mm, ⌀12.0-203.0mm, metal, 50pcs.
Double wrap stainless steel cable ties, uncoated MBT_UHD.
Compare
MBT27UH-SS316L-ML 111-01303
Compare
Add to watchlist
Double wrap stainless steel cable ties, uncoated MBT_UHD.
Compare
Compare
Add to watchlist
50 pcs.
Metal (ML) MBT27UH-SS316L-ML 111-01303
Stainless steel cable tie, ball bearing lock, 362.0x12.3mm, ⌀17.0-102.0mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT14XHS-SS304-ML 111-95148
Compare
Add to watchlist
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
Add to watchlist
50 pcs.
Metal (ML) MBT14XHS-SS304-ML 111-95148
Stainless steel cable tie, ball bearing lock, 681.0x12.3mm, ⌀17.0-203.0mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT27XHS-SS304-ML 111-95278
Compare
Add to watchlist
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
Add to watchlist
50 pcs.
Metal (ML) MBT27XHS-SS304-ML 111-95278
Stainless steel cable tie, ball bearing lock, 127x4.6mm, ⌀15-25mm, black, 100pcs.
Stainless steel cable ties, coated, MBT_SFC, MBT_HFC.
Compare
MBT5SFC-SS316L/SP-BK 111-00288
Compare
Add to watchlist
Stainless steel cable ties, coated, MBT_SFC, MBT_HFC.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) MBT5SFC-SS316L/SP-BK 111-00288
Stainless steel cable tie, ball bearing lock, 201x7.9mm, ⌀17-50mm, black, 50pcs.
MBT_HFC
Compare
MBT8HFC-SS316L/SP-BK 111-00294
Compare
Add to watchlist
MBT_HFC
Compare
Compare
Add to watchlist
50 pcs.
Black (BK) MBT8HFC-SS316L/SP-BK 111-00294
Stainless steel cable tie, ball bearing lock, 362x4.6mm, ⌀17-102mm, black, 100pcs.
Compare
MBT14SFC-SS316L/SP-BK 111-00290
Compare
Add to watchlist
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) MBT14SFC-SS316L/SP-BK 111-00290
Stainless steel cable tie, ball bearing lock, 521.0x12.3mm, ⌀12.0-152.0mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT20XH-SS316L-ML 111-95209
Compare
Add to watchlist
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
Add to watchlist
50 pcs.
Metal (ML) MBT20XH-SS316L-ML 111-95209
Stainless steel cable tie, ball bearing lock, 521.0x4.6mm, ⌀12.0-152.0mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT20S-SS316L-ML 111-93209
Compare
Add to watchlist
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
Add to watchlist
100 pcs.
Metal (ML) MBT20S-SS316L-ML 111-93209
Stainless steel cable tie, ball bearing lock, 685.0x4.6mm, ⌀12.0-203.0mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT27S-SS316L-ML 111-93279
Compare
Add to watchlist
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
Add to watchlist
100 pcs.
Metal (ML) MBT27S-SS316L-ML 111-93279
Stainless steel cable tie, ball bearing lock, 685.0x7.9mm, ⌀12.0-203.0mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT27H-SS316L-ML 111-94279
Compare
Add to watchlist
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
Add to watchlist
50 pcs.
Metal (ML) MBT27H-SS316L-ML 111-94279
Stainless steel cable tie, ball bearing lock, 838.0x4.6mm, ⌀12.0-254.0mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT33S-SS316L-ML 111-93339
Compare
Add to watchlist
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
Add to watchlist
100 pcs.
Metal (ML) MBT33S-SS316L-ML 111-93339
Cable clip for edge, T=1.0 - 3.0mm, Dmax=11.0mm
fixing element for wires and hoses with edge clip 1-3mm.
Compare
EC1-3C15-PA66HIRHS-NA 151-03154
Compare
Add to watchlist
fixing element for wires and hoses with edge clip 1-3mm.
Compare
Compare
Add to watchlist
1000 pcs.
Natural (NA) EC1-3C15-PA66HIRHS-NA 151-03154
Fixing tie with pipe/tube holder, inside serrated, ⌀4.0-45.0mm, black, 200pcs.
2-piece fixing tie, 360° rotatable, a cable tie in combination with an AHC to route and fix harnesses.
Compare
T50RIAHC1TICR-PA66HIRHS-BK 156-03377
Compare
Add to watchlist
2-piece fixing tie, 360° rotatable, a cable tie in combination with an AHC to route and fix harnesses.
Compare
Compare
Add to watchlist
200 pcs.
Black (BK) T50RIAHC1TICR-PA66HIRHS-BK 156-03377
Stainless steel cable tie, ball bearing lock, 521.0x7.9mm, ⌀12.0-152.0mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT20H-SS316L-ML 111-94209
Compare
Add to watchlist
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
Add to watchlist
50 pcs.
Metal (ML) MBT20H-SS316L-ML 111-94209
Stainless steel cable tie, ball bearing lock, 127.0x4.6mm, ⌀12.0-25.0mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT5S-SS316L-ML 111-93059
Compare
Add to watchlist
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
Add to watchlist
100 pcs.
Metal (ML) MBT5S-SS316L-ML 111-93059
Stainless steel cable tie, ball bearing lock, 201.0x7.9mm, ⌀12.0-50.0mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT8H-SS316L-ML 111-94089
Compare
Add to watchlist
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
Add to watchlist
50 pcs.
Metal (ML) MBT8H-SS316L-ML 111-94089
Stainless steel cable tie, ball bearing lock, 201.0x4.6mm, ⌀12.0-50.0mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT8S-SS316L-ML 111-93089
Compare
Add to watchlist
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
Add to watchlist
100 pcs.
Metal (ML) MBT8S-SS316L-ML 111-93089
Fixing elements for edges
Compare
FrameClampBS-SET-PA6GF15-BK 151-04249
Compare
Add to watchlist
Compare
Compare
Add to watchlist
280 pcs.
Black (BK) FrameClampBS-SET-PA6GF15-BK 151-04249
Stainless steel cable tie, ball bearing lock, 362.0x4.6mm, ⌀12.0-102.0mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT14S-SS316L-ML 111-93149
Compare
Add to watchlist
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
Add to watchlist
100 pcs.
Metal (ML) MBT14S-SS316L-ML 111-93149
Fixing tie for edge, inside serrated, ⌀1.0-45.0mm, black, 500pcs.
Compare
T50REC9-PA66HS/PA66HIRHS-BK 156-02678
Compare
Add to watchlist
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) T50REC9-PA66HS/PA66HIRHS-BK 156-02678
Stainless steel cable tie, ball bearing lock, 127.0x4.6mm, ⌀12.0-25.0mm, metal, 100pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT5SS-SS304-ML 111-93058
Compare
Add to watchlist
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
Add to watchlist
100 pcs.
Metal (ML) MBT5SS-SS304-ML 111-93058
Stainless steel cable tie, ball bearing lock, 362.0x7.9mm, ⌀12.0-102.0mm, metal, 50pcs.
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
MBT14H-SS316L-ML 111-94149
Compare
Add to watchlist
Stainless steel cable tie strap features a self locking, ball bearing mechanism that assures high tensile strength and easy insertion.
Compare
Compare
Add to watchlist
50 pcs.
Metal (ML) MBT14H-SS316L-ML 111-94149
Fixing tie for edge, inside serrated, ⌀5.0-36.0mm, black, 500pcs.
Compare
T30REC9SD-PA66HS/PA66HIRHS-BK 156-00573
Compare
Add to watchlist
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) T30REC9SD-PA66HS/PA66HIRHS-BK 156-00573
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
Two piece assembly allows the edge clip to slide along the cable tie strap to ensure proper orientation.
Compare
T50ROSEC9SD-PA66HS/PA66HIRHS-BK 156-00583
Compare
Add to watchlist
Two piece assembly allows the edge clip to slide along the cable tie strap to ensure proper orientation.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) T50ROSEC9SD-PA66HS/PA66HIRHS-BK 156-00583
P-clamp closed, Dmax=4.5mm, ⌀4.3 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
AB3N-PA66-NA 211-00195
Compare
Add to watchlist
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
Add to watchlist
100 pcs.
Natural (NA) AB3N-PA66-NA 211-00195
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for edge, outside serrated, ⌀1.0-31.0mm, black, 500pcs.
Edge Clip applies easily to plastic and metal sheets without the need for a mounting hole
Compare
T50SOSEC10-PA66HS/PA66HIRHS-BK 156-00870
Compare
Add to watchlist
Edge Clip applies easily to plastic and metal sheets without the need for a mounting hole
Compare
Compare
Add to watchlist
500
Black (BK) T50SOSEC10-PA66HS/PA66HIRHS-BK 156-00870
P-clamp closed, Dmin=22.2mm, Dmax=25.4mm, ⌀4.3 mm, black, 100pcs.
Compare
NX14-PA66-BK 221-10140
Compare
Add to watchlist
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) NX14-PA66-BK 221-10140
P-clamp closed, Dmax=3.0mm, ⌀4.3 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
AB2N-PA66-NA 211-00191
Compare
Add to watchlist
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
Add to watchlist
100 pcs.
Natural (NA) AB2N-PA66-NA 211-00191
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for edge, inside serrated, ⌀1.0-45.0mm, black, 500pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
T50REC10-PA66HS/PA66HIRHS-BK 156-00552
Compare
Add to watchlist
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
Compare
Add to watchlist
500
Black (BK) T50REC10-PA66HS/PA66HIRHS-BK 156-00552
Fixing tie for edge, inside serrated, ⌀1.5-30.0mm, black, 500pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
T30REC10-PA66HS/PA66HIRHS-BK 156-00869
Compare
Add to watchlist
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
Compare
Add to watchlist
500
Black (BK) T30REC10-PA66HS/PA66HIRHS-BK 156-00869
P-clamp closed, Dmin=19.0mm, Dmax=21.0mm, ⌀5.1 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
AB14N-PA66-NA 211-00183
Compare
Add to watchlist
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
Add to watchlist
100 pcs.
Natural (NA) AB14N-PA66-NA 211-00183
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
H7P-PA66-NA 211-00269
Compare
Add to watchlist
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
Add to watchlist
100
Natural (NA) H7P-PA66-NA 211-00269
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=28.5mm, ⌀5.2 mm, black, 500pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
H16P-PA66-BK 211-00260
Compare
Add to watchlist
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) H16P-PA66-BK 211-00260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, ⌀9.5-86.4mm, black, 250pcs.
Nut or weld nesting counterbore provides flush mounting at the base
Compare
SDCTL-PA66HIRHSUV-BK 157-00060
Compare
Add to watchlist
Nut or weld nesting counterbore provides flush mounting at the base
Compare
Compare
Add to watchlist
250 bag
Black (BK) SDCTL-PA66HIRHSUV-BK 157-00060
P-clamp closed, Dmax=8.0mm, ⌀4.2 mm, black, 1000pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
H4P-PA66HS-BK 211-60050
Compare
Add to watchlist
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
Compare
Add to watchlist
1000 pcs.
Black (BK) H4P-PA66HS-BK 211-60050
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=11.0mm, ⌀4.2 mm, black, 1000pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
H6P-PA66HS-BK 211-60061
Compare
Add to watchlist
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
Compare
Add to watchlist
1000
Black (BK) H6P-PA66HS-BK 211-60061
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=16.0mm, ⌀4.2 mm, natural, 100pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
H9P-PA66-NA 211-00271
Compare
Add to watchlist
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
Add to watchlist
100
Natural (NA) H9P-PA66-NA 211-00271
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 180°, black, 160pcs.
RCD180SM10.
Compare
RCD180SM10SS-PA66HIRHSUV/SS304-BK 151-02010
Compare
Add to watchlist
RCD180SM10.
Compare
Compare
Add to watchlist
160
Black (BK) RCD180SM10SS-PA66HIRHSUV/SS304-BK 151-02010
Connector clip for edge, black, 500pcs.
Compare
CCIIEC6-MOD-PA66HIRHS-BK 151-01124
Compare
Add to watchlist
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) CCIIEC6-MOD-PA66HIRHS-BK 151-01124
CDC30S40.5M8-PA66HIRHS-BK
Conduit clamp is releasable to allow for maintenance.
Compare
CDC30S40.5M8-PA66HIRHS-BK 133-04239
Compare
Add to watchlist
Conduit clamp is releasable to allow for maintenance.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) CDC30S40.5M8-PA66HIRHS-BK 133-04239
P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 1000pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
H7P-PA66HS-BK 211-60078
Compare
Add to watchlist
Designed with radiused edges to prevent chafing and cutting into insulation.
Compare
Compare
Add to watchlist
1000
Black (BK) H7P-PA66HS-BK 211-60078
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀6.5 mm, 180°, black, 20pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
RCB180SM6-PA66HIRHSUV/ST/ZN-BK 151-03038
Compare
Add to watchlist
Compare
Compare
Add to watchlist
20
Black (BK) RCB180SM6-PA66HIRHSUV/ST/ZN-BK 151-03038
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 15°, black, 160pcs.
Compare
RCC15SM6-PA66HIRHSUV/ST/ZN-BK 151-01656
Compare
Add to watchlist
Compare
Compare
Add to watchlist
160 pcs.
Black (BK) RCC15SM6-PA66HIRHSUV/ST/ZN-BK 151-01656
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀6.5 mm, 180°, black, 3pcs.
Compare
RCC180SM6-PA66HIRHSUV/ST/ZN-BK 151-01672
Compare
Add to watchlist
Compare
Compare
Add to watchlist
3
Black (BK) RCC180SM6-PA66HIRHSUV/ST/ZN-BK 151-01672
Fixing tie for edge, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
T50REC4B-PA66HIRHSUVR5/PA66HIRHSUV-BK 156-02229
Compare
Add to watchlist
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
Compare
Add to watchlist
500
Black (BK) T50REC4B-PA66HIRHSUVR5/PA66HIRHSUV-BK 156-02229
Fixing tie for edge, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
T50REC4A-PA66HS/PA66HIRHS-BK 156-00539
Compare
Add to watchlist
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
Compare
Add to watchlist
500
Black (BK) T50REC4A-PA66HS/PA66HIRHS-BK 156-00539
Fixing tie for edge, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
T50REC4A-PP/PA66HIRHS-BK 156-00564
Compare
Add to watchlist
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
Compare
Add to watchlist
500
Black (BK) T50REC4A-PP/PA66HIRHS-BK 156-00564
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
Fixing tie with EdgeClip for bundling cables above and parlell to the edge.
Compare
T50ROSEC10-PA66HS/PA66HIRHS-BK 156-00871
Compare
Add to watchlist
Fixing tie with EdgeClip for bundling cables above and parlell to the edge.
Compare
Compare
Add to watchlist
500
Black (BK) T50ROSEC10-PA66HS/PA66HIRHS-BK 156-00871
Fixing tie for edge, inside serrated, ⌀4.0-45.0mm, black, 100pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
T50REC4A-PA66UV/PA66HIRHS-BK 156-00635
Compare
Add to watchlist
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
Compare
Add to watchlist
100
Black (BK) T50REC4A-PA66UV/PA66HIRHS-BK 156-00635
P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 180°, black, 280pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
RCA180SM10.
Compare
RCB180SM10-PA66HIRHSUV/ST/ZN-BK 151-01390
Compare
Add to watchlist
RCA180SM10.
Compare
Compare
Add to watchlist
280 pcs.
Black (BK) RCB180SM10-PA66HIRHSUV/ST/ZN-BK 151-01390
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for stud
Compare
DLC26M8-PA66HIRHSUV-BK 151-03590
Compare
Add to watchlist
Compare
Compare
Add to watchlist
1000 pcs.
Black (BK) DLC26M8-PA66HIRHSUV-BK 151-03590
Fixing tie for edge, inside serrated, ⌀5.0-50.0mm, black, 500pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
T50REC9SD-PA66HS/PA66HIRHS-BK 156-00551
Compare
Add to watchlist
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
Compare
Add to watchlist
500
Black (BK) T50REC9SD-PA66HS/PA66HIRHS-BK 156-00551
P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 180°, black, 300pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
RCA180SM10.
Compare
RCA180SM10-PA66HIRHSUV/ST/ZN-BK 151-01417
Compare
Add to watchlist
RCA180SM10.
Compare
Compare
Add to watchlist
300 pcs.
Black (BK) RCA180SM10-PA66HIRHSUV/ST/ZN-BK 151-01417
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀10.29 mm, 180°, black, 160pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
RCA180SM10.
Compare
RCC180SM10-PA66HIRHSUV/ST/ZN-BK 151-01475
Compare
Add to watchlist
RCA180SM10.
Compare
Compare
Add to watchlist
160 pcs.
Black (BK) RCC180SM10-PA66HIRHSUV/ST/ZN-BK 151-01475
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀10.29 mm, 180°, black, 160pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
RCD180SM10.
Compare
RCD180SM10-PA66HIRHSUV/ST/ZN-BK 151-01501
Compare
Add to watchlist
RCD180SM10.
Compare
Compare
Add to watchlist
160 pcs.
Black (BK) RCD180SM10-PA66HIRHSUV/ST/ZN-BK 151-01501
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀6.5 mm, 180°, black, 160pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
RCD180SM6-PA66HIRHSUV/ST/ZN-BK 151-01661
Compare
Add to watchlist
Compare
Compare
Add to watchlist
160 pcs.
Black (BK) RCD180SM6-PA66HIRHSUV/ST/ZN-BK 151-01661
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp short, Dmin=36.0mm, Dmax=51.0mm, ⌀8.31 mm, 180°, black, 160pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Compare
RCD180SM8-PA66HIRHSUV/ST/ZN-BK 151-01499
Compare
Add to watchlist
Compare
Compare
Add to watchlist
160 pcs.
Black (BK) RCD180SM8-PA66HIRHSUV/ST/ZN-BK 151-01499
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for edge, inside serrated, ⌀5.0-35.0mm, black, 500pcs.
2-piece fixing tie for edges 1 - 3 mm and harness routing on top parallel to the edge.
Compare
T30REC4A-PA66HS/PA66HIRHS-BK 156-00813
Compare
Add to watchlist
2-piece fixing tie for edges 1 - 3 mm and harness routing on top parallel to the edge.
Compare
Compare
Add to watchlist
500
Black (BK) T30REC4A-PA66HS/PA66HIRHS-BK 156-00813
Plastic hose clamp, ⌀19.3-21.5mm, black, 1000pcs.
Designed for quick, ratcheted installation and can be released and reused.
Compare
SNP16-PA66GF13-BK 190-00076
Compare
Add to watchlist
Designed for quick, ratcheted installation and can be released and reused.
Compare
Compare
Add to watchlist
1000
Black (BK) SNP16-PA66GF13-BK 190-00076
Fixing tie for edge, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
T50REC4A-PA66HIRHSUVR5/PA66HIRHSUV-BK 156-02231
Compare
Add to watchlist
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
Compare
Add to watchlist
500
Black (BK) T50REC4A-PA66HIRHSUVR5/PA66HIRHSUV-BK 156-02231
Plastic hose clamp, ⌀23.7-27.4mm, white, 1000pcs.
Designed for quick, ratcheted installation and can be released and reused.
Compare
SNP22-POM-WH 190-00114
Compare
Add to watchlist
Designed for quick, ratcheted installation and can be released and reused.
Compare
Compare
Add to watchlist
1000
White (WH) SNP22-POM-WH 190-00114
Plastic hose clamp, ⌀58.0-64mm, white, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Compare
SNP60-POM-WH 190-00196
Compare
Add to watchlist
Designed for quick, ratcheted installation and can be released and reused.
Compare
Compare
Add to watchlist
100
White (WH) SNP60-POM-WH 190-00196
Plastic hose clamp, ⌀28.5-32.7mm, white, 500pcs.
Designed for quick, ratcheted installation and can be released and reused.
Compare
SNP28-POM-WH 190-00125
Compare
Add to watchlist
Designed for quick, ratcheted installation and can be released and reused.
Compare
Compare
Add to watchlist
500
White (WH) SNP28-POM-WH 190-00125
Fixing tie for edge, inside serrated, ⌀4.0-45.0mm, black, 100pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
T50REC4A-PA66HIRHSUVR5/PA66HIRHSUV-BK 156-02230
Compare
Add to watchlist
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
Compare
Add to watchlist
100
Black (BK) T50REC4A-PA66HIRHSUVR5/PA66HIRHSUV-BK 156-02230
Fixing tie for edge, outside serrated, ⌀5.0-35.0mm, black, 500pcs.
Two piece assembly allows the edge clip to slide along the cable tie strap to ensure proper orientation.
Compare
T50SOSEC4B-PA66HS/PA66HIRHS-BK 156-00859
Compare
Add to watchlist
Two piece assembly allows the edge clip to slide along the cable tie strap to ensure proper orientation.
Compare
Compare
Add to watchlist
500
Black (BK) T50SOSEC4B-PA66HS/PA66HIRHS-BK 156-00859
Fixing tie for edge, inside serrated, ⌀4.0-45.0mm, black, 500pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
T50REC4B-PP/PA66HIRHS-BK 156-00565
Compare
Add to watchlist
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
Compare
Add to watchlist
500
Black (BK) T50REC4B-PP/PA66HIRHS-BK 156-00565
Fixing tie for edge, inside serrated, ⌀4.0-45.0mm, natural/black, 500pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
T50REC4B-PA66HS/PA66HIRHS-NA/BK 156-00940
Compare
Add to watchlist
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
Compare
Add to watchlist
500
Natural (NA), Black (BK) T50REC4B-PA66HS/PA66HIRHS-NA/BK 156-00940
Fixing tie for edge, inside serrated, ⌀4.0-45.0mm, black, 100pcs.
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
T50REC4B-PA66HIRHSUVR5/PA66HIRHSUV-BK 156-02228
Compare
Add to watchlist
Cable tie with edge clip eliminates the need for drilling mounting holes, simplifying installation.
Compare
Compare
Add to watchlist
100
Black (BK) T50REC4B-PA66HIRHSUVR5/PA66HIRHSUV-BK 156-02228
P-clamp closed, Dmax=24.0mm, ⌀5.2 mm, natural, 500pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
H14P-PA66-NA 211-60149
Compare
Add to watchlist
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
Add to watchlist
500 pcs.
Natural (NA) H14P-PA66-NA 211-60149
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, ⌀9.5-58.4mm, black, 250pcs.
Locking stud mount pawls allow for easy hand insertion.
Compare
SDCTR312-PA66HIRHSUV-BK 117-00012
Compare
Add to watchlist
Locking stud mount pawls allow for easy hand insertion.
Compare
Compare
Add to watchlist
250 pcs.
Black (BK) SDCTR312-PA66HIRHSUV-BK 117-00012
P-clamp closed, Dmax=35.0mm, ⌀5.2 mm, natural, 250pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
H18P-PA66-NA 211-60189
Compare
Add to watchlist
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
Add to watchlist
250 pcs.
Natural (NA) H18P-PA66-NA 211-60189
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU25C-AL/CR-BK 211-15250
Compare
Add to watchlist
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
Add to watchlist
50 pcs.
Black (BK) ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for edge, outside serrated, ⌀4.0-35.0mm, black, 500pcs.
2-piece fixing tie for edges 1 - 3 mm and harness routing on top parallel to the edge.
Compare
T50SOSEC4A-PA66HS/PA66HIRHS-BK 150-76093
Compare
Add to watchlist
2-piece fixing tie for edges 1 - 3 mm and harness routing on top parallel to the edge.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) T50SOSEC4A-PA66HS/PA66HIRHS-BK 150-76093
Plastic hose clamp, ⌀31.2-35.8mm, black, 50pcs.
Designed for quick, ratcheted installation and can be released and reused.
Compare
SNP32-PA66GF13-BK 192-10320
Compare
Add to watchlist
Designed for quick, ratcheted installation and can be released and reused.
Compare
Compare
Add to watchlist
50 pcs.
Black (BK) SNP32-PA66GF13-BK 192-10320
Plastic hose clamp, ⌀12.0-13.7mm, natural, 500pcs.
SNP - Snapper Hose Clips range.
Compare
SNP6(E)-POM-NA 191-10069
Compare
Add to watchlist
SNP - Snapper Hose Clips range.
Compare
Compare
Add to watchlist
500 pcs.
Natural (NA) SNP6(E)-POM-NA 191-10069
Plastic hose clamp, ⌀15.6-18.3mm, black, 100pcs.
Designed for quick, ratcheted installation and can be released and reused.
Compare
SNP12A-PA66GF13-BK 190-00254
Compare
Add to watchlist
Designed for quick, ratcheted installation and can be released and reused.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) SNP12A-PA66GF13-BK 190-00254
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 100pcs.
Cable tie with edge clip.
Compare
T50ROSEC4A-PA66HS/PA66HIRHS-BK 150-02404
Compare
Add to watchlist
Cable tie with edge clip.
Compare
Compare
Add to watchlist
100 pcs.
Black (BK) T50ROSEC4A-PA66HS/PA66HIRHS-BK 150-02404
Fixing tie for edge, outside serrated, ⌀1.0-31.0mm, black, 500pcs.
2-piece fixing tie for edges 1 - 3 mm and harness routing on top parallel to the edge.
Compare
T50SOSEC10-PA66HS/PA66HIRHS-BK 156-00015
Compare
Add to watchlist
2-piece fixing tie for edges 1 - 3 mm and harness routing on top parallel to the edge.
Compare
Compare
Add to watchlist
500 pcs.
Black (BK) T50SOSEC10-PA66HS/PA66HIRHS-BK 156-00015
P-clamp closed, Dmax=20.5mm, ⌀4.2 mm, natural, 1000pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clamps H1P - H18P in different dimensions.
Compare
H12P-PA66-NA 211-60129
Compare
Add to watchlist
P-Clamps H1P - H18P in different dimensions.
Compare
Compare
Add to watchlist
1000 pcs.
Natural (NA) H12P-PA66-NA 211-60129
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU20C-AL/CR-BK 211-15200
Compare
Add to watchlist
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
Add to watchlist
50 pcs.
Black (BK) ALU20C-AL/CR-BK 211-15200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
ALU22C-AL/CR-BK 211-15220
Compare
Add to watchlist
P-Clips (Alu) with Rubber Insert for vibration resistance
Compare
Compare
Add to watchlist
50 pcs.
Black (BK) ALU22C-AL/CR-BK 211-15220
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Results for "Cable Clamp" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

  International

Social Media

© HellermannTyton 2026 (v4.312.2)  |  Update: 18/07/2026  |  Privacy Settings
Contact