Visit the website for your country to get more information and discover our products.

20/02/2026

Thick wall heat shrink tubing
Art.-No. 321-21601 | HA47-160/50-1.22m-PO-X-BK

HA47 - Halogenfree 4:1 Heavy Dual Wall Heat Shrink Tubing.

Heavy wall tubing.

Heat Shrink Tubing 4:1 with adhesive

TREDUX HA47 - application below ground.

HA47 is a thick wall polyolefin adhesive lined sleeving used for low voltage power applications.
The thermoplastic adhesive provides good moisture sealing and weathering protection.

Add to watchlist

More products in this product group:

Heat shrinkable tubing up to 3.5:1 - 1 m lengths >

Base Data

Application	The toughness and wheatherability makes it well suited for exposed applications and underground cable joints and cable terminations.
Behaviour At Low Temperature	not cracking
Behaviour at Heat Shock	not cracking, not fluid, not dripping
Behaviour at low Temperature test method	ASTM D2671
Brand Family	HA47
Color	Black (BK)
Elongation At Heat Aging	300%
Heat Aging Test	168h/150°C
Heat Aging test method	ASTM D2671
Heat Shock Test	4h/225°C
Minimum Tensile Strength At Heat Aging	12MPa
PART DESCRIPTION	HA47-160/50-1.22m-PO-X-BK
Part No.	321-21601
Short Desc.	HA47 is an adhesive lined thick wall, heat shrink tubing with a 3.5:1 shrink ratio. Black (3.28 ft/stk)
Type	HA47-160/50-1.22m

Product Dimensions


For Object Outside Diameter	73-142 mm
Length (metric)	1.22m
Longitudinal Change After Shrinkage	-10% max.
Printable	No
Recovered Diameter (metric)	50.0mm
Shrink Ratio	up to 4:1
Supplied Diameter (metric)	165.0mm
Volume Resistance	10¹² Ω cm
Wall Thickness (metric)	4.2mm

Downloads

Material and Specifications

Adhesive	Hot melt adhesive
Dielectric Strength	20kV/mm
Dielectric Strength test method	IEC 60243
Elongation at break (min.)	350%
Elongation at break test method	ASTM D2671
Halogen Free	Yes
Material	PO-X
Material	Polyolefin, cross-linked (PO-X)
Min. Shrink Temperature	+248 °F (+120 °C)
Operating Temperature	-67°F to +230°F (-55°C to +110°C)
ROHS compliant	Yes
Test Method Tensile Strength	ASTM D2671
UL Listed (US)	No
UL Recognized (US)	No
Volume Resistance test method	IEC 93

Logistic and Packaging

Pkg. Qty.	1
Pkg. Qty.	1m

More Information

Calculators

Calculator tool for Heat Shrink Tubing

Calculator tool for Heat Shrink Tubing

for HA47-160/50-1.22m - Art.-No.: 321-21601
In selecting the right shrink tubing size it is important to consider to "80:20 rule". Shrink tubing should recover at least 20% and maximum 80% of its potential shrink range.
According to which specification would you like to check if the selected product is suitable for your application?

diameter

Please enter either the smallest and/or the largest outer diameter of the substrate.

Min mm Max mm

Cross-Section

Please enter either the smallest and/or largest cross-section of the object to be covered.

Min mm² Max mm²

perimeter

Please enter either the smallest and/or largest perimeter of the object to be covered.

Min mm Max mm
Wall thickness calculator

Wall thickness calculator

for HA47-160/50-1.22m - Art.-No.: 321-21601

Depending on the substrate dimensions when Heat shrink tubing is recovered the diameter and the wall thickness will change. This Calculator aims to offer a theoretical wall thickness for this situation.Please enter the outer diameter of the object to be covered

Outer diameter of object (A)

mm

Inner diameter of tubing after shrinking (B)

mm

Wall thickness fully recovered ( C )

mm

Accessories

CHG900 391-90010
Cordless Heat Gun - Gas powered
On my watchlist Add to watchlist

Please log in with your HellermannTyton account to use your personal watchlist.
Login / Register

Solutions

Contact Terms of Service Imprint Guidelines and commitments Privacy Policy Cookie Policy

Update: 14/02/2026 © HellermannTyton 2026

© HellermannTyton 2026 (v4.298.2) | Update: 14/02/2026 | Privacy Settings

‹ › ×