Results for "screw mount cable holder" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Engineer View

Sustainable

Engineer View

Sustainable

Reset all

Cable tie mount with pipe/tube holder, ⌀8.2 mm, black, 500pcs.

Separates and secures bundles or convoluted tubing to prevent abrasion.

Compare

HDCM2A-PA66GF15-BK 151-03253

Compare

Add to watchlist

Separates and secures bundles or convoluted tubing to prevent abrasion.

Compare

Cable tie mount with pipe/tube holder, ⌀8.2 mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) HDCM2A-PA66GF15-BK 151-03253

Cable tie mount with pipe/tube holder/for screw fixation, ⌀8.12 mm, black, 500pcs.

Compare

HC3A-PA66HIRGF13-BK 133-00998

Compare

Add to watchlist

Compare

Cable tie mount with pipe/tube holder/for screw fixation, ⌀8.12 mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) HC3A-PA66HIRGF13-BK 133-00998

Cable tie mount with pipe/tube holder, Wmax=8.8mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

New innovative QwicGrip for fastening to e.g. solar rails with cable ties.

Compare

QGDHC5.2-8.0M-PA66W-BK 151-04088

Compare

Add to watchlist

New innovative QwicGrip for fastening to e.g. solar rails with cable ties.

Compare

Cable tie mount with pipe/tube holder, Wmax=8.8mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) QGDHC5.2-8.0M-PA66W-BK 151-04088

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

Simple snap in design allows for quick and easy installation or removal of cables.

Compare

RB8-PA66-NA 151-13608

Compare

Add to watchlist

Simple snap in design allows for quick and easy installation or removal of cables.

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

Compare

Add to watchlist

200

Natural (NA) RB8-PA66-NA 151-13608

Bundling clip with pipe/tube holder, L=60.4mm, SO=15.0mm, black, 500pcs.

Compare

OCTC1-PA66HIRHS-BK 151-00447

Compare

Add to watchlist

Compare

Bundling clip with pipe/tube holder, L=60.4mm, SO=15.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) OCTC1-PA66HIRHS-BK 151-00447

Cable clip for adhesive use/with pipe/tube holder, Dmax=20.0mm

RB20 self-adhesive clip for a quick and easy installation.

Compare

RB20-PA66HIRHS-BK 151-00831

Compare

Add to watchlist

RB20 self-adhesive clip for a quick and easy installation.

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmax=20.0mm

Compare

Add to watchlist

100 pcs.

Black (BK) RB20-PA66HIRHS-BK 151-00831

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

Two RB8 adhesive cable clamps shown.

Compare

RB8-PA66-NA 151-13606

Compare

Add to watchlist

Two RB8 adhesive cable clamps shown.

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

Compare

Add to watchlist

100 pcs.

Natural (NA) RB8-PA66-NA 151-13606

Cable clip for adhesive use/with pipe/tube holder, Dmin=14.0mm, Dmax=14.0mm

RB14 self-adhesive clip for a quick and easy installation.

Compare

RB14-PA66-BK 151-00502

Compare

Add to watchlist

RB14 self-adhesive clip for a quick and easy installation.

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmin=14.0mm, Dmax=14.0mm

Compare

Add to watchlist

200 pcs.

Black (BK) RB14-PA66-BK 151-00502

Cable clip for adhesive use/with pipe/tube holder, Dmax=14.0mm

RB14 self-adhesive clip for a quick and easy installation.

Compare

RB14-PA66-NA 151-00505

Compare

Add to watchlist

RB14 self-adhesive clip for a quick and easy installation.

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmax=14.0mm

Compare

Add to watchlist

100 pcs.

Natural (NA) RB14-PA66-NA 151-00505

Cable clip for screw fixation/with pipe/tube holder, ⌀M8, Dmax=29.0mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Screwed Ratchet Clamp SRC150M8 for parallel bundling of cables and tubes.

Compare

SRC150M8-PA6GF30-BK 156-02742

Compare

Add to watchlist

Screwed Ratchet Clamp SRC150M8 for parallel bundling of cables and tubes.

Compare

Cable clip for screw fixation/with pipe/tube holder, ⌀M8, Dmax=29.0mm

Compare

Add to watchlist

150

Black (BK) SRC150M8-PA6GF30-BK 156-02742

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip for adhesive use/with pipe/tube holder, Dmax=14.0mm

RB14 self-adhesive clip for a quick and easy installation.

Compare

RB14-PA66-NA 151-00506

Compare

Add to watchlist

RB14 self-adhesive clip for a quick and easy installation.

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmax=14.0mm

Compare

Add to watchlist

200

Natural (NA) RB14-PA66-NA 151-00506

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

SolidTack Clip RB8APT with special adhesive.

Compare

RB8APT-PA66-BK 151-00497

Compare

Add to watchlist

SolidTack Clip RB8APT with special adhesive.

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

Compare

Add to watchlist

100 pcs.

Black (BK) RB8APT-PA66-BK 151-00497

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

H7P-PA66HS-BK 211-60006

Compare

Add to watchlist

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) H7P-PA66HS-BK 211-60006

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

Simple snap in design allows for quick and easy installation or removal of cables.

Compare

RB8-PA66-BK 151-13601

Compare

Add to watchlist

Simple snap in design allows for quick and easy installation or removal of cables.

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

Compare

Add to watchlist

100 pcs.

Black (BK) RB8-PA66-BK 151-13601

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 160pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

RCC180SM8-PA66HIRHSUV/ST/ZN-BK 151-01474

Compare

Add to watchlist

Compare

P-clamp short, Dmin=19.4mm, Dmax=36.0mm, ⌀8.31 mm, 180°, black, 160pcs.

Compare

Add to watchlist

160 pcs.

Black (BK) RCC180SM8-PA66HIRHSUV/ST/ZN-BK 151-01474

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie for stud, outside serrated, ⌀35.0mm, black, 500pcs.

Compare

HT160SB5HE-PA66HS-BK 157-00089

Compare

Add to watchlist

Compare

Fixing tie for stud, outside serrated, ⌀35.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) HT160SB5HE-PA66HS-BK 157-00089

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, natural, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H7P-PA66-NA 211-60079

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, natural, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Natural (NA) H7P-PA66-NA 211-60079

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 15°, black, 280pcs.

Compare

RCB15SM10-PA66HIRHSUV/ST/ZN-BK 151-01449

Compare

Add to watchlist

Compare

P-clamp short, Dmin=12.7mm, Dmax=19.5mm, ⌀10.29 mm, 15°, black, 280pcs.

Compare

Add to watchlist

280 pcs.

Black (BK) RCB15SM10-PA66HIRHSUV/ST/ZN-BK 151-01449

P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 90°, black, 200pcs.

Compare

RCA90LM10-PA66HIRHSUV/ST/ZN-BK 151-01438

Compare

Add to watchlist

Compare

P-clamp long, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 90°, black, 200pcs.

Compare

Add to watchlist

200 pcs.

Black (BK) RCA90LM10-PA66HIRHSUV/ST/ZN-BK 151-01438

P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 90°, black, 300pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

RCA90SM10-PA66HIRHSUV/ST/ZN-BK 151-01435

Compare

Add to watchlist

Compare

P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀10.29 mm, 90°, black, 300pcs.

Compare

Add to watchlist

300 pcs.

Black (BK) RCA90SM10-PA66HIRHSUV/ST/ZN-BK 151-01435

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 90°, black, 300pcs.

Compare

RCA90SM8-PA66HIRHSUV/ST/ZN-BK 151-01434

Compare

Add to watchlist

Compare

P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀8.31 mm, 90°, black, 300pcs.

Compare

Add to watchlist

300 pcs.

Black (BK) RCA90SM8-PA66HIRHSUV/ST/ZN-BK 151-01434

CDC30S40.5M8-PA66HIRHS-BK

Conduit clamp is releasable to allow for maintenance.

Compare

CDC30S40.5M8-PA66HIRHS-BK 133-04239

Compare

Add to watchlist

Conduit clamp is releasable to allow for maintenance.

Compare

CDC30S40.5M8-PA66HIRHS-BK

Compare

Add to watchlist

500 pcs.

Black (BK) CDC30S40.5M8-PA66HIRHS-BK 133-04239

P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 90°, black, 300pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

RCA90SM6-PA66HIRHSUV/ST/ZN-BK 151-01643

Compare

Add to watchlist

Compare

P-clamp short, Dmin=6.2mm, Dmax=13.7mm, ⌀6.5 mm, 90°, black, 300pcs.

Compare

Add to watchlist

300 pcs.

Black (BK) RCA90SM6-PA66HIRHSUV/ST/ZN-BK 151-01643

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.

Compare

T50SOSSBU-M6-PA66HSUV-GY 157-00065

Compare

Add to watchlist

Compare

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.

Compare

Add to watchlist

100 pcs.

Grey (GY) T50SOSSBU-M6-PA66HSUV-GY 157-00065

P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU17C-AL/CR-BK 211-15170

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU17C-AL/CR-BK 211-15170

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU8-AL-NA 211-10080

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU8-AL-NA 211-10080

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU7-AL-NA 211-10070

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU7-AL-NA 211-10070

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmin=19.0mm, Dmax=21.0mm, ⌀5.1 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

AB14N-PA66-NA 211-00183

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmin=19.0mm, Dmax=21.0mm, ⌀5.1 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) AB14N-PA66-NA 211-00183

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU4-AL-NA 211-10040

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU4-AL-NA 211-10040

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU6-AL-NA 211-10060

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU6-AL-NA 211-10060

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU10-AL-NA 211-10100

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU10-AL-NA 211-10100

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU11C-AL/CR-BK 211-15110

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=14.3mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU11C-AL/CR-BK 211-15110

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU14C-AL/CR-BK 211-15140

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=19.1mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU14C-AL/CR-BK 211-15140

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU16C-AL/CR-BK 211-15160

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=22.2mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU16C-AL/CR-BK 211-15160

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU18C-AL/CR-BK 211-15180

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=25.4mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU18C-AL/CR-BK 211-15180

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU4C-AL/CR-BK 211-15040

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=3.2mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU4C-AL/CR-BK 211-15040

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

ALU5-AL-NA 211-10050

Compare

Add to watchlist

P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.

Compare

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) ALU5-AL-NA 211-10050

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU5C-AL/CR-BK 211-15050

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=4.8mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU5C-AL/CR-BK 211-15050

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount with pipe/tube holder, ⌀8.2 mm, blue, 600pcs.

Separates and secures bundles or convoluted tubing to prevent abrasion.

Compare

HDCM2C-PA66GF15-BU 151-03255

Compare

Add to watchlist

Separates and secures bundles or convoluted tubing to prevent abrasion.

Compare

Cable tie mount with pipe/tube holder, ⌀8.2 mm, blue, 600pcs.

Compare

Add to watchlist

600

Blue (BU) HDCM2C-PA66GF15-BU 151-03255

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU7C-AL/CR-BK 211-15070

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=8.0mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU7C-AL/CR-BK 211-15070

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU6C-AL/CR-BK 211-15060

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=6.4mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU6C-AL/CR-BK 211-15060

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU8C-AL/CR-BK 211-15080

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=9.5mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU8C-AL/CR-BK 211-15080

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU9C-AL/CR-BK 211-15090

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=11.1mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU9C-AL/CR-BK 211-15090

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable tie mount with pipe/tube holder, ⌀8.2 mm, green, 600pcs.

Separates and secures bundles or convoluted tubing to prevent abrasion.

Compare

HDCM2B-PA66GF15-GN 151-03254

Compare

Add to watchlist

Separates and secures bundles or convoluted tubing to prevent abrasion.

Compare

Cable tie mount with pipe/tube holder, ⌀8.2 mm, green, 600pcs.

Compare

Add to watchlist

600

Green (GN) HDCM2B-PA66GF15-GN 151-03254

Cable tie mount with pipe/tube holder, ⌀8.2 mm, natural, 600pcs.

Separates and secures bundles or convoluted tubing to prevent abrasion.

Compare

HDCM2D-PA66GF15-NA 151-03256

Compare

Add to watchlist

Separates and secures bundles or convoluted tubing to prevent abrasion.

Compare

Cable tie mount with pipe/tube holder, ⌀8.2 mm, natural, 600pcs.

Compare

Add to watchlist

600 pcs.

Natural (NA) HDCM2D-PA66GF15-NA 151-03256

P-clamp closed, Dmin=22.2mm, Dmax=25.4mm, ⌀4.3 mm, black, 100pcs.

Compare

NX14-PA66-BK 221-10140

Compare

Add to watchlist

Compare

P-clamp closed, Dmin=22.2mm, Dmax=25.4mm, ⌀4.3 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) NX14-PA66-BK 221-10140

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H7P-PA66-NA 211-00269

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, natural, 100pcs.

Compare

Add to watchlist

100

Natural (NA) H7P-PA66-NA 211-00269

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU10C-CR/AL-BK 211-15100

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU10C-CR/AL-BK 211-15100

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

H7P-PA66HS-BK 211-60078

Compare

Add to watchlist

Designed with radiused edges to prevent chafing and cutting into insulation.

Compare

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 1000pcs.

Compare

Add to watchlist

1000

Black (BK) H7P-PA66HS-BK 211-60078

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip with pipe/tube holder, Dmin=19.3mm, Dmax=36.1mm

Designed specially for NexTracker, stainless steel mounting hanger can tolerate high torque.

Compare

IRCCNEXTT-PA66HIRHSUV/SS304-BK 156-04193

Compare

Add to watchlist

Designed specially for NexTracker, stainless steel mounting hanger can tolerate high torque.

Compare

Cable clip with pipe/tube holder, Dmin=19.3mm, Dmax=36.1mm

Compare

Add to watchlist

200 pcs.

Black (BK) IRCCNEXTT-PA66HIRHSUV/SS304-BK 156-04193

Cable clip with pipe/tube holder, Dmin=12.7mm, Dmax=19.6mm

Designed specially for NexTracker, stainless steel mounting hanger can tolerate high torque.

Compare

IRCBNEXTT-PA66HIRHSUV/SS304-BK 156-04192

Compare

Add to watchlist

Designed specially for NexTracker, stainless steel mounting hanger can tolerate high torque.

Compare

Cable clip with pipe/tube holder, Dmin=12.7mm, Dmax=19.6mm

Compare

Add to watchlist

200 pcs.

Black (BK) IRCBNEXTT-PA66HIRHSUV/SS304-BK 156-04192

Cable clip for adhesive use/with pipe/tube holder, ⌀3.2 mm, Dmax=3.0mm

Ideal for holding ribbon cables in computer equipment, gaming machines or domestic appliances.

Compare

TY8H1S-PA66-NA 151-12819

Compare

Add to watchlist

Ideal for holding ribbon cables in computer equipment, gaming machines or domestic appliances.

Compare

Cable clip for adhesive use/with pipe/tube holder, ⌀3.2 mm, Dmax=3.0mm

Compare

Add to watchlist

100 pcs.

Natural (NA) TY8H1S-PA66-NA 151-12819

Cable tie mount with pipe/tube holder, Wmax=8.8mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.

New innovative QwicGrip for fastening to e.g. solar rails with cable ties.

Compare

QGDHC5.2-8.0M-PA11-BK 151-04089

Compare

Add to watchlist

New innovative QwicGrip for fastening to e.g. solar rails with cable ties.

Compare

Cable tie mount with pipe/tube holder, Wmax=8.8mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) QGDHC5.2-8.0M-PA11-BK 151-04089

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>EarthSource denotes HellermannTyton products made from polymers derived from abundant renewable plant-based sources or from the ground underneath.

Cable clip for adhesive use/with pipe/tube holder, Dmax=16mm

Self adhesive one piece fixing clips RB14 and RB20.

Compare

RB16VHB-PA66-BK 151-13611

Compare

Add to watchlist

Self adhesive one piece fixing clips RB14 and RB20.

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmax=16mm

Compare

Add to watchlist

200 pcs.

Black (BK) RB16VHB-PA66-BK 151-13611

Cable clip for adhesive use/with pipe/tube holder, Dmax=12mm

Self adhesive one piece fixing clips RB14 and RB20.

Compare

RB12VHB-PA66-NA 151-13612

Compare

Add to watchlist

Self adhesive one piece fixing clips RB14 and RB20.

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmax=12mm

Compare

Add to watchlist

200 pcs.

Natural (NA) RB12VHB-PA66-NA 151-13612

Fixing tie for stud, ⌀1-35.0mm, black, 500pcs.

1-piece fixing ties for weld studs 6mm

Compare

T50SOSSBS6E-PA66HS-BK 157-00211

Compare

Add to watchlist

1-piece fixing ties for weld studs 6mm

Compare

Fixing tie for stud, ⌀1-35.0mm, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) T50SOSSBS6E-PA66HS-BK 157-00211

Cable clip for adhesive use/with pipe/tube holder, Dmax=5.0mm

RB5 self-adhesive clip for a quick and easy installation.

Compare

RB5-PA66-NA 151-14004

Compare

Add to watchlist

RB5 self-adhesive clip for a quick and easy installation.

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmax=5.0mm

Compare

Add to watchlist

100 pcs.

Natural (NA) RB5-PA66-NA 151-14004

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

Simple snap in design allows for quick and easy installation or removal of cables.

Compare

RB8-PA66-BK 151-00169

Compare

Add to watchlist

Simple snap in design allows for quick and easy installation or removal of cables.

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

Compare

Add to watchlist

100 pcs.

Black (BK) RB8-PA66-BK 151-00169

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

Simple snap in design allows for quick and easy installation or removal of cables.

Compare

RB8VHB-PA66-BU 151-13613

Compare

Add to watchlist

Simple snap in design allows for quick and easy installation or removal of cables.

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

Compare

Add to watchlist

200 pcs.

Blue (BU) RB8VHB-PA66-BU 151-13613

Cable clip for adhesive use/with pipe/tube holder, Dmax=14.0mm

Compare

RB14APT-A-PA66-BK 151-03606

Compare

Add to watchlist

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmax=14.0mm

Compare

Add to watchlist

200 pcs.

Black (BK) RB14APT-A-PA66-BK 151-03606

Cable clip for adhesive use/with pipe/tube holder, Dmax=5.0mm

Compare

RB5APT-A-PA66-BK 151-14006

Compare

Add to watchlist

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmax=5.0mm

Compare

Add to watchlist

50 pcs.

Black (BK) RB5APT-A-PA66-BK 151-14006

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

Self adhesive one piece fixing clips RB14 and RB20.

Compare

RB8APT-A-PA66-BK 151-04688

Compare

Add to watchlist

Self adhesive one piece fixing clips RB14 and RB20.

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

Compare

Add to watchlist

100 pcs.

Black (BK) RB8APT-A-PA66-BK 151-04688

P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU25C-AL/CR-BK 211-15250

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU25C-AL/CR-BK 211-15250

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip for adhesive use/with pipe/tube holder, Dmax=5.0mm

RB5 self-adhesive clip for a quick and easy installation.

Compare

RB5-PA66-BK 151-14000

Compare

Add to watchlist

RB5 self-adhesive clip for a quick and easy installation.

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmax=5.0mm

Compare

Add to watchlist

50 pcs.

Black (BK) RB5-PA66-BK 151-14000

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.

Compare

T50SOSSBU-M8-PA66HSW-GY 157-00066

Compare

Add to watchlist

Compare

Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.

Compare

Add to watchlist

100 pcs.

Grey (GY) T50SOSSBU-M8-PA66HSW-GY 157-00066

P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU20C-AL/CR-BK 211-15200

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=28.6mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU20C-AL/CR-BK 211-15200

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU22C-AL/CR-BK 211-15220

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=31.8mm, ⌀5.2 mm, black, 50pcs.

Compare

Add to watchlist

50 pcs.

Black (BK) ALU22C-AL/CR-BK 211-15220

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip for adhesive use/with pipe/tube holder, Dmax=5.0mm

RB5 self-adhesive clip for a quick and easy installation.

Compare

RB5-PA66-NA 151-14059

Compare

Add to watchlist

RB5 self-adhesive clip for a quick and easy installation.

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmax=5.0mm

Compare

Add to watchlist

100 pcs.

Natural (NA) RB5-PA66-NA 151-14059

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

Two RB8 adhesive cable clamps shown.

Compare

RB8-PA66-NA 151-14089

Compare

Add to watchlist

Two RB8 adhesive cable clamps shown.

Compare

Cable clip for adhesive use/with pipe/tube holder, Dmax=8.0mm

Compare

Add to watchlist

5000 pcs.

Natural (NA) RB8-PA66-NA 151-14089

Cable clip, T=3.0mm, ⌀3.3 - 4.0 mm, Dmax=13mm

Compare

HC513FT4J-E/TFE-BU 151-03162

Compare

Add to watchlist

Compare

Cable clip, T=3.0mm, ⌀3.3 - 4.0 mm, Dmax=13mm

Compare

Add to watchlist

100 pcs.

Blue (BU) HC513FT4J-E/TFE-BU 151-03162

Cable clip, T=3.0mm, ⌀3.3 - 4.0 mm, Dmax=20mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

HC1320FT4J-PA66-NA 151-04012

Compare

Add to watchlist

Compare

Cable clip, T=3.0mm, ⌀3.3 - 4.0 mm, Dmax=20mm

Compare

Add to watchlist

100 pcs.

Natural (NA) HC1320FT4J-PA66-NA 151-04012

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip, T=3.0mm, ⌀3.3 - 4.0 mm, Dmax=20mm

Compare

HC1320FT4J-E/TFE-BU 151-04014

Compare

Add to watchlist

Compare

Cable clip, T=3.0mm, ⌀3.3 - 4.0 mm, Dmax=20mm

Compare

Add to watchlist

100 pcs.

Blue (BU) HC1320FT4J-E/TFE-BU 151-04014

Fixing tie for stud, inside serrated, ⌀9.0-40.0mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Flexible head wraps around cable bundle for easy installation.

Compare

RT50RS5-PA66-BK 115-07110

Compare

Add to watchlist

Flexible head wraps around cable bundle for easy installation.

Compare

Fixing tie for stud, inside serrated, ⌀9.0-40.0mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) RT50RS5-PA66-BK 115-07110

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU12C-AL/CR-BK 211-15120

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=15.9mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU12C-AL/CR-BK 211-15120

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

ALU15C-AL/CR-BK 211-15150

Compare

Add to watchlist

P-Clips (Alu) with Rubber Insert for vibration resistance

Compare

P-clamp closed, Dmax=20.6mm, ⌀5.2 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) ALU15C-AL/CR-BK 211-15150

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip, T=3.0mm, ⌀3.3 - 4.0 mm, Dmax=13mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

HC513FT4J-PA66-NA 151-03160

Compare

Add to watchlist

Compare

Cable clip, T=3.0mm, ⌀3.3 - 4.0 mm, Dmax=13mm

Compare

Add to watchlist

100 pcs.

Natural (NA) HC513FT4J-PA66-NA 151-03160

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip, T=3.0mm, ⌀3.3 - 4.0 mm, Dmax=13mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

HC513FT4J-PA66HSW-BK 151-03161

Compare

Add to watchlist

Compare

Cable clip, T=3.0mm, ⌀3.3 - 4.0 mm, Dmax=13mm

Compare

Add to watchlist

100 pcs.

Black (BK) HC513FT4J-PA66HSW-BK 151-03161

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip, T=3.0mm, ⌀3.3 - 4.0 mm, Dmax=20mm

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Compare

HC1320FT4J-PA66HSW-BK 151-04013

Compare

Add to watchlist

Compare

Cable clip, T=3.0mm, ⌀3.3 - 4.0 mm, Dmax=20mm

Compare

Add to watchlist

100 pcs.

Black (BK) HC1320FT4J-PA66HSW-BK 151-04013

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Cable clip, T=3.0mm, ⌀3.3 - 4.0 mm, Dmax=13mm

Compare

HC513FT4J-PA66V0-WH 151-04361

Compare

Add to watchlist

Compare

Cable clip, T=3.0mm, ⌀3.3 - 4.0 mm, Dmax=13mm

Compare

Add to watchlist

100 pcs.

White (WH) HC513FT4J-PA66V0-WH 151-04361

Cable clip, T=3.0mm, ⌀3.3 - 4.0 mm, Dmax=20mm

Compare

HC1320FT4J-PA66V0-WH 151-04362

Compare

Add to watchlist

Compare

Cable clip, T=3.0mm, ⌀3.3 - 4.0 mm, Dmax=20mm

Compare

Add to watchlist

100 pcs.

White (WH) HC1320FT4J-PA66V0-WH 151-04362

Cable clip, T=3.0mm, ⌀3.3 - 4.0 mm, Dmax=8mm

Compare

HC38FT4J-PA66-NA 151-04357

Compare

Add to watchlist

Compare

Cable clip, T=3.0mm, ⌀3.3 - 4.0 mm, Dmax=8mm

Compare

Add to watchlist

100 pcs.

Natural (NA) HC38FT4J-PA66-NA 151-04357

Cable clip, T=3.0mm, ⌀3.3 - 4.0 mm, Dmax=8mm

Compare

HC38FT4J-PA66HSW-BK 151-04358

Compare

Add to watchlist

Compare

Cable clip, T=3.0mm, ⌀3.3 - 4.0 mm, Dmax=8mm

Compare

Add to watchlist

100 pcs.

Black (BK) HC38FT4J-PA66HSW-BK 151-04358

Cable clip, T=3.0mm, ⌀3.3 - 4.0 mm, Dmax=8mm

Compare

HC38FT4J-E/TFE-BU 151-04359

Compare

Add to watchlist

Compare

Cable clip, T=3.0mm, ⌀3.3 - 4.0 mm, Dmax=8mm

Compare

Add to watchlist

100 pcs.

Blue (BU) HC38FT4J-E/TFE-BU 151-04359

Cable clip, T=3.0mm, ⌀3.3 - 4.0 mm, Dmax=8mm

Compare

HC38FT4J-PA66V0-WH 151-04360

Compare

Add to watchlist

Compare

Cable clip, T=3.0mm, ⌀3.3 - 4.0 mm, Dmax=8mm

Compare

Add to watchlist

100 pcs.

White (WH) HC38FT4J-PA66V0-WH 151-04360

CDC10R40.5M10-PA66-BK

Conduit clamp is releasable to allow for maintenance.

Compare

CDC10R40.5M10-PA66-BK 133-03441

Compare

Add to watchlist

Conduit clamp is releasable to allow for maintenance.

Compare

CDC10R40.5M10-PA66-BK

Compare

Add to watchlist

1000 pcs.

Black (BK) CDC10R40.5M10-PA66-BK 133-03441

CDC30S40.5M12-PA66HIRHS-BK

Compare

CDC30S40.5M12-PA66HIRHS-BK 133-03401

Compare

Add to watchlist

Compare

CDC30S40.5M12-PA66HIRHS-BK

Compare

Add to watchlist

500 pcs.

Black (BK) CDC30S40.5M12-PA66HIRHS-BK 133-03401

CDC25S40.5M10-PA66-BK

Conduit clamp is releasable to allow for maintenance.

Compare

CDC25S40.5M10-PA66-BK 133-03423

Compare

Add to watchlist

Conduit clamp is releasable to allow for maintenance.

Compare

CDC25S40.5M10-PA66-BK

Compare

Add to watchlist

500 pcs.

Black (BK) CDC25S40.5M10-PA66-BK 133-03423

P-clamp closed, Dmax=11.5mm, ⌀4.3 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

AB8N-PA66-NA 211-00211

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=11.5mm, ⌀4.3 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) AB8N-PA66-NA 211-00211

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=13.5mm, ⌀4.3 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

AB9N-PA66-NA 211-00213

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=13.5mm, ⌀4.3 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) AB9N-PA66-NA 211-00213

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Connector clip for edge, EWCAP-005-11, black, 500pcs.

Compare

ECC1CPT-PA66HIRHS-BK 151-00499

Compare

Add to watchlist

Compare

Connector clip for edge, EWCAP-005-11, black, 500pcs.

Compare

Add to watchlist

500 pcs.

Black (BK) ECC1CPT-PA66HIRHS-BK 151-00499

P-clamp closed, Dmin=19.0mm, Dmax=21.0mm, ⌀5.1 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

AB14N-PA66W-BK 211-00184

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmin=19.0mm, Dmax=21.0mm, ⌀5.1 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) AB14N-PA66W-BK 211-00184

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmin=22.5mm, Dmax=24.5mm, ⌀5.1 mm, natural, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

AB16N-PA66-NA 211-00185

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmin=22.5mm, Dmax=24.5mm, ⌀5.1 mm, natural, 100pcs.

Compare

Add to watchlist

100 pcs.

Natural (NA) AB16N-PA66-NA 211-00185

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmin=22.5mm, Dmax=24.5mm, ⌀5.1 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

AB16N-PA66W-BK 211-00186

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmin=22.5mm, Dmax=24.5mm, ⌀5.1 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) AB16N-PA66W-BK 211-00186

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=11.5mm, ⌀4.3 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

AB8N-PA66W-BK 211-00212

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=11.5mm, ⌀4.3 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) AB8N-PA66W-BK 211-00212

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-clamp closed, Dmax=13.5mm, ⌀4.3 mm, black, 100pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

AB9N-PA66W-BK 211-00214

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=13.5mm, ⌀4.3 mm, black, 100pcs.

Compare

Add to watchlist

100 pcs.

Black (BK) AB9N-PA66W-BK 211-00214

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Releasable cable clip for screw fixation/with pipe/tube holder, ⌀M6, Dmax=91mm

Compare

HSRC72-PA666V0-BK 151-04629

Compare

Add to watchlist

Compare

Releasable cable clip for screw fixation/with pipe/tube holder, ⌀M6, Dmax=91mm

Compare

Add to watchlist

40 set

Black (BK) HSRC72-PA666V0-BK 151-04629

P-clamp closed, black, 200pcs.

Compare

NX14-PA66-BK 211-01000

Compare

Add to watchlist

Compare

P-clamp closed, black, 200pcs.

Compare

Add to watchlist

200 pcs.

Black (BK) NX14-PA66-BK 211-01000

P-clamp closed, natural, 250pcs.

P-Clamps H1P - H18P in different dimensions.

Compare

ES1703AC-PA66-NA 211-00108

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, natural, 250pcs.

Compare

Add to watchlist

250 pcs.

Natural (NA) ES1703AC-PA66-NA 211-00108

P-clamp closed, white, 100pcs.

Mount for flat cables, PFC series.

Compare

PFC-PVC-WH 211-00216

Compare

Add to watchlist

Mount for flat cables, PFC series.

Compare

P-clamp closed, white, 100pcs.

Compare

Add to watchlist

100 pcs.

White (WH) PFC-PVC-WH 211-00216

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 1000pcs.

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

P-Clamps H1P - H18P in different dimensions.

Compare

H7P-PA66-BK 211-60077

Compare

Add to watchlist

P-Clamps H1P - H18P in different dimensions.

Compare

P-clamp closed, Dmax=12.5mm, ⌀4.2 mm, black, 1000pcs.

Compare

Add to watchlist

1000 pcs.

Black (BK) H7P-PA66-BK 211-60077

Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.

Results for "screw mount cable holder" in Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Cable clips

Cable clips

Cable clips for industrial applications

From adhesive cable clips to wire clips for parallel routing or fluid management: Discover our product portfolio here.

Cable clips

Edge clips: fasten cables without drilling

Edge clips are a cable-fastening solution that enables the flexible routing of wires, cable harnesses, conduits and pipes in a variety of industrial applications, including the automotive sector.

Edge clips

Cable ties and fixings

Cable ties and fixings

Cable Ties and Fixings

Cable ties have to be able to meet the most varied demands these days as they are used in the widest range of operations – from the simple bundling of cables with cable ties to the absolutely specific use of cable ties under extreme conditions.

Cable ties

United States of America

HellermannTyton | Phone: (800) 537-1512 | Email: corp@htamericas.com

Policy and Values

Data Protection

Contact

Social Media

© HellermannTyton 2026 (v4.310.2) | Update: 20/06/2026 | Privacy Settings

‹ › ×